minetest
/
irrlicht
mirror of https://github.com/minetest/irrlicht.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
irrlicht/include/SMaterial.h

756 lines
27 KiB
C++
Raw Blame History

// Copyright (C) 2002-2012 Nikolaus Gebhardt
// This file is part of the "Irrlicht Engine".
// For conditions of distribution and use, see copyright notice in irrlicht.h
#ifndef __S_MATERIAL_H_INCLUDED__
#define __S_MATERIAL_H_INCLUDED__
#include "SColor.h"
#include "matrix4.h"
#include "irrArray.h"
#include "irrMath.h"
#include "EMaterialTypes.h"
#include "EMaterialFlags.h"
#include "SMaterialLayer.h"
namespace irr
{
namespace video
{
class ITexture;
//! Flag for MaterialTypeParam (in combination with EMT_ONETEXTURE_BLEND) or for BlendFactor
//! BlendFunc = source * sourceFactor + dest * destFactor
enum E_BLEND_FACTOR
{
EBF_ZERO = 0, //!< src & dest (0, 0, 0, 0)
EBF_ONE, //!< src & dest (1, 1, 1, 1)
EBF_DST_COLOR, //!< src (destR, destG, destB, destA)
EBF_ONE_MINUS_DST_COLOR, //!< src (1-destR, 1-destG, 1-destB, 1-destA)
EBF_SRC_COLOR, //!< dest (srcR, srcG, srcB, srcA)
EBF_ONE_MINUS_SRC_COLOR, //!< dest (1-srcR, 1-srcG, 1-srcB, 1-srcA)
EBF_SRC_ALPHA, //!< src & dest (srcA, srcA, srcA, srcA)
EBF_ONE_MINUS_SRC_ALPHA, //!< src & dest (1-srcA, 1-srcA, 1-srcA, 1-srcA)
EBF_DST_ALPHA, //!< src & dest (destA, destA, destA, destA)
EBF_ONE_MINUS_DST_ALPHA, //!< src & dest (1-destA, 1-destA, 1-destA, 1-destA)
EBF_SRC_ALPHA_SATURATE //!< src (min(srcA, 1-destA), idem, ...)
};
//! Values defining the blend operation
enum E_BLEND_OPERATION
{
EBO_NONE = 0, //!< No blending happens
EBO_ADD, //!< Default blending adds the color values
EBO_SUBTRACT, //!< This mode subtracts the color values
EBO_REVSUBTRACT,//!< This modes subtracts destination from source
EBO_MIN, //!< Choose minimum value of each color channel
EBO_MAX, //!< Choose maximum value of each color channel
EBO_MIN_FACTOR, //!< Choose minimum value of each color channel after applying blend factors, not widely supported
EBO_MAX_FACTOR, //!< Choose maximum value of each color channel after applying blend factors, not widely supported
EBO_MIN_ALPHA, //!< Choose minimum value of each color channel based on alpha value, not widely supported
EBO_MAX_ALPHA //!< Choose maximum value of each color channel based on alpha value, not widely supported
};
//! MaterialTypeParam: e.g. DirectX: D3DTOP_MODULATE, D3DTOP_MODULATE2X, D3DTOP_MODULATE4X
enum E_MODULATE_FUNC
{
EMFN_MODULATE_1X = 1,
EMFN_MODULATE_2X = 2,
EMFN_MODULATE_4X = 4
};
//! Comparison function, e.g. for depth buffer test
enum E_COMPARISON_FUNC
{
//! Depth test disabled (disable also write to depth buffer)
ECFN_DISABLED=0,
//! <= test, default for e.g. depth test
ECFN_LESSEQUAL=1,
//! Exact equality
ECFN_EQUAL=2,
//! exclusive less comparison, i.e. <
ECFN_LESS,
//! Succeeds almost always, except for exact equality
ECFN_NOTEQUAL,
//! >= test
ECFN_GREATEREQUAL,
//! inverse of <=
ECFN_GREATER,
//! test succeeds always
ECFN_ALWAYS,
//! Test never succeeds
ECFN_NEVER
};
//! Enum values for enabling/disabling color planes for rendering
enum E_COLOR_PLANE
{
//! No color enabled
ECP_NONE=0,
//! Alpha enabled
ECP_ALPHA=1,
//! Red enabled
ECP_RED=2,
//! Green enabled
ECP_GREEN=4,
//! Blue enabled
ECP_BLUE=8,
//! All colors, no alpha
ECP_RGB=14,
//! All planes enabled
ECP_ALL=15
};
//! Source of the alpha value to take
/** This is currently only supported in EMT_ONETEXTURE_BLEND. You can use an
or'ed combination of values. Alpha values are modulated (multiplied). */
enum E_ALPHA_SOURCE
{
//! Use no alpha, somewhat redundant with other settings
EAS_NONE=0,
//! Use vertex color alpha
EAS_VERTEX_COLOR,
//! Use texture alpha channel
EAS_TEXTURE
};
//! Pack srcFact, dstFact, Modulate and alpha source to MaterialTypeParam or BlendFactor
/** alpha source can be an OR'ed combination of E_ALPHA_SOURCE values. */
inline f32 pack_textureBlendFunc(const E_BLEND_FACTOR srcFact, const E_BLEND_FACTOR dstFact,
const E_MODULATE_FUNC modulate=EMFN_MODULATE_1X, const u32 alphaSource=EAS_TEXTURE)
{
const u32 tmp = (alphaSource << 20) | (modulate << 16) | (srcFact << 12) | (dstFact << 8) | (srcFact << 4) | dstFact;
return FR(tmp);
}
//! Pack srcRGBFact, dstRGBFact, srcAlphaFact, dstAlphaFact, Modulate and alpha source to MaterialTypeParam or BlendFactor
/** alpha source can be an OR'ed combination of E_ALPHA_SOURCE values. */
inline f32 pack_textureBlendFuncSeparate(const E_BLEND_FACTOR srcRGBFact, const E_BLEND_FACTOR dstRGBFact,
const E_BLEND_FACTOR srcAlphaFact, const E_BLEND_FACTOR dstAlphaFact,
const E_MODULATE_FUNC modulate=EMFN_MODULATE_1X, const u32 alphaSource=EAS_TEXTURE)
{
const u32 tmp = (alphaSource << 20) | (modulate << 16) | (srcAlphaFact << 12) | (dstAlphaFact << 8) | (srcRGBFact << 4) | dstRGBFact;
return FR(tmp);
}
//! Unpack srcFact, dstFact, modulo and alphaSource factors
/** The fields don't use the full byte range, so we could pack even more... */
inline void unpack_textureBlendFunc(E_BLEND_FACTOR &srcFact, E_BLEND_FACTOR &dstFact,
E_MODULATE_FUNC &modulo, u32& alphaSource, const f32 param)
{
const u32 state = IR(param);
alphaSource = (state & 0x00F00000) >> 20;
modulo = E_MODULATE_FUNC( ( state & 0x000F0000 ) >> 16 );
srcFact = E_BLEND_FACTOR ( ( state & 0x000000F0 ) >> 4 );
dstFact = E_BLEND_FACTOR ( ( state & 0x0000000F ) );
}
//! Unpack srcRGBFact, dstRGBFact, srcAlphaFact, dstAlphaFact, modulo and alphaSource factors
/** The fields don't use the full byte range, so we could pack even more... */
inline void unpack_textureBlendFuncSeparate(E_BLEND_FACTOR &srcRGBFact, E_BLEND_FACTOR &dstRGBFact,
E_BLEND_FACTOR &srcAlphaFact, E_BLEND_FACTOR &dstAlphaFact,
E_MODULATE_FUNC &modulo, u32& alphaSource, const f32 param)
{
const u32 state = IR(param);
alphaSource = (state & 0x00F00000) >> 20;
modulo = E_MODULATE_FUNC( ( state & 0x000F0000 ) >> 16 );
srcAlphaFact = E_BLEND_FACTOR ( ( state & 0x0000F000 ) >> 12 );
dstAlphaFact = E_BLEND_FACTOR ( ( state & 0x00000F00 ) >> 8 );
srcRGBFact = E_BLEND_FACTOR ( ( state & 0x000000F0 ) >> 4 );
dstRGBFact = E_BLEND_FACTOR ( ( state & 0x0000000F ) );
}
//! has blend factor alphablending
inline bool textureBlendFunc_hasAlpha ( const E_BLEND_FACTOR factor )
{
switch ( factor )
{
case EBF_SRC_ALPHA:
case EBF_ONE_MINUS_SRC_ALPHA:
case EBF_DST_ALPHA:
case EBF_ONE_MINUS_DST_ALPHA:
case EBF_SRC_ALPHA_SATURATE:
return true;
default:
return false;
}
}
//! These flags are used to specify the anti-aliasing and smoothing modes
/** Techniques supported are multisampling, geometry smoothing, and alpha
to coverage.
Some drivers don't support a per-material setting of the anti-aliasing
modes. In those cases, FSAA/multisampling is defined by the device mode
chosen upon creation via irr::SIrrCreationParameters.
*/
enum E_ANTI_ALIASING_MODE
{
//! Use to turn off anti-aliasing for this material
EAAM_OFF=0,
//! Default anti-aliasing mode
EAAM_SIMPLE=1,
//! High-quality anti-aliasing, not always supported, automatically enables SIMPLE mode
EAAM_QUALITY=3,
//! Line smoothing
//! Careful, enabling this can lead to software emulation under OpenGL
EAAM_LINE_SMOOTH=4,
//! point smoothing, often in software and slow, only with OpenGL
EAAM_POINT_SMOOTH=8,
//! All typical anti-alias and smooth modes
EAAM_FULL_BASIC=15,
//! Enhanced anti-aliasing for transparent materials
/** Usually used with EMT_TRANSPARENT_ALPHA_CHANNEL_REF and multisampling. */
EAAM_ALPHA_TO_COVERAGE=16
};
//! These flags allow to define the interpretation of vertex color when lighting is enabled
/** Without lighting being enabled the vertex color is the only value defining the fragment color.
Once lighting is enabled, the four values for diffuse, ambient, emissive, and specular take over.
With these flags it is possible to define which lighting factor shall be defined by the vertex color
instead of the lighting factor which is the same for all faces of that material.
The default is to use vertex color for the diffuse value, another pretty common value is to use
vertex color for both diffuse and ambient factor. */
enum E_COLOR_MATERIAL
{
//! Don't use vertex color for lighting
ECM_NONE=0,
//! Use vertex color for diffuse light, this is default
ECM_DIFFUSE,
//! Use vertex color for ambient light
ECM_AMBIENT,
//! Use vertex color for emissive light
ECM_EMISSIVE,
//! Use vertex color for specular light
ECM_SPECULAR,
//! Use vertex color for both diffuse and ambient light
ECM_DIFFUSE_AND_AMBIENT
};
//! DEPRECATED. Will be removed after Irrlicht 1.9.
/** Flags for the definition of the polygon offset feature. These flags define whether the offset should be into the screen, or towards the eye. */
enum E_POLYGON_OFFSET
{
//! Push pixel towards the far plane, away from the eye
/** This is typically used for rendering inner areas. */
EPO_BACK=0,
//! Pull pixels towards the camera.
/** This is typically used for polygons which should appear on top
of other elements, such as decals. */
EPO_FRONT=1
};
//! Names for polygon offset direction
const c8* const PolygonOffsetDirectionNames[] =
{
"Back",
"Front",
0
};
//! For SMaterial.ZWriteEnable
enum E_ZWRITE
{
//! zwrite always disabled for this material
EZW_OFF = 0,
//! This is the default setting for SMaterial and tries to handle things automatically.
//! This is also the value which is set when SMaterial::setFlag(EMF_ZWRITE_ENABLE) is enabled.
//! Usually zwriting is enabled non-transparent materials - as far as Irrlicht can recognize those.
//! Basically Irrlicht tries to handle the zwriting for you and assumes transparent materials don't need it.
//! This is addionally affected by IVideoDriver::setAllowZWriteOnTransparent
EZW_AUTO,
//! zwrite always enabled for this material
EZW_ON
};
//! Names for E_ZWRITE
const c8* const ZWriteNames[] =
{
"Off",
"Auto",
"On",
0
};
//! Maximum number of texture an SMaterial can have.
/** SMaterial might ignore some textures in most function, like assignment and comparison,
when SIrrlichtCreationParameters::MaxTextureUnits is set to a lower number.
*/
const u32 MATERIAL_MAX_TEXTURES = _IRR_MATERIAL_MAX_TEXTURES_;
//! Struct for holding parameters for a material renderer
// Note for implementors: Serialization is in CNullDriver
class SMaterial
{
public:
//! Default constructor. Creates a solid, lit material with white colors
SMaterial()
: MaterialType(EMT_SOLID), AmbientColor(255,255,255,255), DiffuseColor(255,255,255,255),
EmissiveColor(0,0,0,0), SpecularColor(255,255,255,255),
Shininess(0.0f), MaterialTypeParam(0.0f), MaterialTypeParam2(0.0f), Thickness(1.0f),
ZBuffer(ECFN_LESSEQUAL), AntiAliasing(EAAM_SIMPLE), ColorMask(ECP_ALL),
ColorMaterial(ECM_DIFFUSE), BlendOperation(EBO_NONE), BlendFactor(0.0f),
PolygonOffsetFactor(0), PolygonOffsetDirection(EPO_FRONT),
PolygonOffsetDepthBias(0.f), PolygonOffsetSlopeScale(0.f),
Wireframe(false), PointCloud(false), GouraudShading(true),
Lighting(true), ZWriteEnable(EZW_AUTO), BackfaceCulling(true), FrontfaceCulling(false),
FogEnable(false), NormalizeNormals(false), UseMipMaps(true)
{ }
//! Copy constructor
/** \param other Material to copy from. */
SMaterial(const SMaterial& other)
{
// These pointers are checked during assignment
for (u32 i=0; i<MATERIAL_MAX_TEXTURES; ++i)
TextureLayer[i].TextureMatrix = 0;
*this = other;
}
//! Texture layer array.
SMaterialLayer TextureLayer[MATERIAL_MAX_TEXTURES];
//! Type of the material. Specifies how everything is blended together
E_MATERIAL_TYPE MaterialType;
//! How much ambient light (a global light) is reflected by this material.
/** The default is full white, meaning objects are completely
globally illuminated. Reduce this if you want to see diffuse
or specular light effects. */
SColor AmbientColor;
//! How much diffuse light coming from a light source is reflected by this material.
/** The default is full white. */
SColor DiffuseColor;
//! Light emitted by this material. Default is to emit no light.
SColor EmissiveColor;
//! How much specular light (highlights from a light) is reflected.
/** The default is to reflect white specular light. See
SMaterial::Shininess on how to enable specular lights. */
SColor SpecularColor;
//! Value affecting the size of specular highlights.
/** A value of 20 is common. If set to 0, no specular
highlights are being used. To activate, simply set the
shininess of a material to a value in the range [0.5;128]:
\code
sceneNode->getMaterial(0).Shininess = 20.0f;
\endcode
You can change the color of the highlights using
\code
sceneNode->getMaterial(0).SpecularColor.set(255,255,255,255);
\endcode
The specular color of the dynamic lights
(SLight::SpecularColor) will influence the the highlight color
too, but they are set to a useful value by default when
creating the light scene node.*/
f32 Shininess;
//! Free parameter, dependent on the material type.
/** Mostly ignored, used for example in
EMT_TRANSPARENT_ALPHA_CHANNEL and EMT_ONETEXTURE_BLEND. */
f32 MaterialTypeParam;
//! Second free parameter, dependent on the material type.
/** Mostly ignored. */
f32 MaterialTypeParam2;
//! Thickness of non-3dimensional elements such as lines and points.
f32 Thickness;
//! Is the ZBuffer enabled? Default: ECFN_LESSEQUAL
/** If you want to disable depth test for this material
just set this parameter to ECFN_DISABLED.
Values are from E_COMPARISON_FUNC. */
u8 ZBuffer;
//! Sets the antialiasing mode
/** Values are chosen from E_ANTI_ALIASING_MODE. Default is
EAAM_SIMPLE, i.e. simple multi-sample anti-aliasing. */
u8 AntiAliasing;
//! Defines the enabled color planes
/** Values are defined as or'ed values of the E_COLOR_PLANE enum.
Only enabled color planes will be rendered to the current render
target. Typical use is to disable all colors when rendering only to
depth or stencil buffer, or using Red and Green for Stereo rendering. */
u8 ColorMask:4;
//! Defines the interpretation of vertex color in the lighting equation
/** Values should be chosen from E_COLOR_MATERIAL.
When lighting is enabled, vertex color can be used instead of the
material values for light modulation. This allows to easily change e.g. the
diffuse light behavior of each face. The default, ECM_DIFFUSE, will result in
a very similar rendering as with lighting turned off, just with light shading. */
u8 ColorMaterial:3;
//! Store the blend operation of choice
/** Values to be chosen from E_BLEND_OPERATION. */
E_BLEND_OPERATION BlendOperation:4;
//! Store the blend factors
/** textureBlendFunc/textureBlendFuncSeparate functions should be used to write
properly blending factors to this parameter.
Due to historical reasons this parameter is not used for material type
EMT_ONETEXTURE_BLEND which uses MaterialTypeParam instead for the blend factor.
It's generally used only for materials without any blending otherwise (like EMT_SOLID).
It's main use is to allow having shader materials which can enable/disable
blending after they have been created.
When you set this you usually also have to set BlendOperation to a value != EBO_NONE
(setting it to EBO_ADD is probably the most common one value). */
f32 BlendFactor;
//! DEPRECATED. Will be removed after Irrlicht 1.9. Please use PolygonOffsetDepthBias instead.
/** Factor specifying how far the polygon offset should be made.
Specifying 0 disables the polygon offset. The direction is specified separately.
The factor can be from 0 to 7.
Note: This probably never worked on Direct3D9 (was coded for D3D8 which had different value ranges) */
u8 PolygonOffsetFactor:3;
//! DEPRECATED. Will be removed after Irrlicht 1.9.
/** Flag defining the direction the polygon offset is applied to.
Can be to front or to back, specified by values from E_POLYGON_OFFSET. */
E_POLYGON_OFFSET PolygonOffsetDirection:1;
//! A constant z-buffer offset for a polygon/line/point
/** The range of the value is driver specific.
On OpenGL you get units which are multiplied by the smallest value that is guaranteed to produce a resolvable offset.
On D3D9 you can pass a range between -1 and 1. But you should likely divide it by the range of the depthbuffer.
Like dividing by 65535.0 for a 16 bit depthbuffer. Thought it still might produce too large of a bias.
Some article (https://aras-p.info/blog/2008/06/12/depth-bias-and-the-power-of-deceiving-yourself/)
recommends multiplying by 2.0*4.8e-7 (and strangely on both 16 bit and 24 bit). */
f32 PolygonOffsetDepthBias;
//! Variable Z-Buffer offset based on the slope of the polygon.
/** For polygons looking flat at a camera you could use 0 (for example in a 2D game)
But in most cases you will have polygons rendered at a certain slope.
The driver will calculate the slope for you and this value allows to scale that slope.
The complete polygon offset is: PolygonOffsetSlopeScale*slope + PolygonOffsetDepthBias
A good default here is to use 1.f if you want to push the polygons away from the camera
and -1.f to pull them towards the camera. */
f32 PolygonOffsetSlopeScale;
//! Draw as wireframe or filled triangles? Default: false
/** The user can access a material flag using
\code material.Wireframe=true \endcode
or \code material.setFlag(EMF_WIREFRAME, true); \endcode */
bool Wireframe:1;
//! Draw as point cloud or filled triangles? Default: false
bool PointCloud:1;
//! Flat or Gouraud shading? Default: true
bool GouraudShading:1;
//! Will this material be lighted? Default: true
bool Lighting:1;
//! Is the zbuffer writable or is it read-only. Default: EZW_AUTO.
/** If this parameter is not EZW_OFF, you probably also want to set ZBuffer
to values other than ECFN_DISABLED */
E_ZWRITE ZWriteEnable:2;
//! Is backface culling enabled? Default: true
bool BackfaceCulling:1;
//! Is frontface culling enabled? Default: false
bool FrontfaceCulling:1;
//! Is fog enabled? Default: false
bool FogEnable:1;
//! Should normals be normalized?
/** Always use this if the mesh lit and scaled. Default: false */
bool NormalizeNormals:1;
//! Shall mipmaps be used if available
/** Sometimes, disabling mipmap usage can be useful. Default: true */
bool UseMipMaps:1;
//! Gets the texture transformation matrix for level i
/** \param i The desired level. Must not be larger than MATERIAL_MAX_TEXTURES
\return Texture matrix for texture level i. */
core::matrix4& getTextureMatrix(u32 i)
{
return TextureLayer[i].getTextureMatrix();
}
//! Gets the immutable texture transformation matrix for level i
/** \param i The desired level.
\return Texture matrix for texture level i, or identity matrix for levels larger than MATERIAL_MAX_TEXTURES. */
const core::matrix4& getTextureMatrix(u32 i) const
{
if (i<MATERIAL_MAX_TEXTURES)
return TextureLayer[i].getTextureMatrix();
else
return core::IdentityMatrix;
}
//! Sets the i-th texture transformation matrix
/** \param i The desired level.
\param mat Texture matrix for texture level i. */
void setTextureMatrix(u32 i, const core::matrix4& mat)
{
if (i>=MATERIAL_MAX_TEXTURES)
return;
TextureLayer[i].setTextureMatrix(mat);
}
//! Gets the i-th texture
/** \param i The desired level.
\return Texture for texture level i, if defined, else 0. */
ITexture* getTexture(u32 i) const
{
return i < MATERIAL_MAX_TEXTURES ? TextureLayer[i].Texture : 0;
}
//! Sets the i-th texture
/** If i>=MATERIAL_MAX_TEXTURES this setting will be ignored.
\param i The desired level.
\param tex Texture for texture level i. */
void setTexture(u32 i, ITexture* tex)
{
if (i>=MATERIAL_MAX_TEXTURES)
return;
TextureLayer[i].Texture = tex;
}
//! Sets the Material flag to the given value
/** \param flag The flag to be set.
\param value The new value for the flag. */
void setFlag(E_MATERIAL_FLAG flag, bool value)
{
switch (flag)
{
case EMF_WIREFRAME:
Wireframe = value; break;
case EMF_POINTCLOUD:
PointCloud = value; break;
case EMF_GOURAUD_SHADING:
GouraudShading = value; break;
case EMF_LIGHTING:
Lighting = value; break;
case EMF_ZBUFFER:
ZBuffer = value; break;
case EMF_ZWRITE_ENABLE:
ZWriteEnable = value ? EZW_AUTO : EZW_OFF; break;
case EMF_BACK_FACE_CULLING:
BackfaceCulling = value; break;
case EMF_FRONT_FACE_CULLING:
FrontfaceCulling = value; break;
case EMF_BILINEAR_FILTER:
{
for (u32 i=0; i<MATERIAL_MAX_TEXTURES; ++i)
TextureLayer[i].BilinearFilter = value;
}
break;
case EMF_TRILINEAR_FILTER:
{
for (u32 i=0; i<MATERIAL_MAX_TEXTURES; ++i)
TextureLayer[i].TrilinearFilter = value;
}
break;
case EMF_ANISOTROPIC_FILTER:
{
if (value)
for (u32 i=0; i<MATERIAL_MAX_TEXTURES; ++i)
TextureLayer[i].AnisotropicFilter = 0xFF;
else
for (u32 i=0; i<MATERIAL_MAX_TEXTURES; ++i)
TextureLayer[i].AnisotropicFilter = 0;
}
break;
case EMF_FOG_ENABLE:
FogEnable = value; break;
case EMF_NORMALIZE_NORMALS:
NormalizeNormals = value; break;
case EMF_TEXTURE_WRAP:
{
for (u32 i=0; i<MATERIAL_MAX_TEXTURES; ++i)
{
TextureLayer[i].TextureWrapU = (E_TEXTURE_CLAMP)value;
TextureLayer[i].TextureWrapV = (E_TEXTURE_CLAMP)value;
TextureLayer[i].TextureWrapW = (E_TEXTURE_CLAMP)value;
}
}
break;
case EMF_ANTI_ALIASING:
AntiAliasing = value?EAAM_SIMPLE:EAAM_OFF; break;
case EMF_COLOR_MASK:
ColorMask = value?ECP_ALL:ECP_NONE; break;
case EMF_COLOR_MATERIAL:
ColorMaterial = value?ECM_DIFFUSE:ECM_NONE; break;
case EMF_USE_MIP_MAPS:
UseMipMaps = value; break;
case EMF_BLEND_OPERATION:
BlendOperation = value?EBO_ADD:EBO_NONE; break;
case EMF_BLEND_FACTOR:
break;
case EMF_POLYGON_OFFSET:
PolygonOffsetFactor = value?1:0;
PolygonOffsetDirection = EPO_BACK;
PolygonOffsetSlopeScale = value?1.f:0.f;
PolygonOffsetDepthBias = value?1.f:0.f;
default:
break;
}
}
//! Gets the Material flag
/** \param flag The flag to query.
\return The current value of the flag. */
bool getFlag(E_MATERIAL_FLAG flag) const
{
switch (flag)
{
case EMF_WIREFRAME:
return Wireframe;
case EMF_POINTCLOUD:
return PointCloud;
case EMF_GOURAUD_SHADING:
return GouraudShading;
case EMF_LIGHTING:
return Lighting;
case EMF_ZBUFFER:
return ZBuffer!=ECFN_DISABLED;
case EMF_ZWRITE_ENABLE:
return ZWriteEnable != EZW_OFF;
case EMF_BACK_FACE_CULLING:
return BackfaceCulling;
case EMF_FRONT_FACE_CULLING:
return FrontfaceCulling;
case EMF_BILINEAR_FILTER:
return TextureLayer[0].BilinearFilter;
case EMF_TRILINEAR_FILTER:
return TextureLayer[0].TrilinearFilter;
case EMF_ANISOTROPIC_FILTER:
return TextureLayer[0].AnisotropicFilter!=0;
case EMF_FOG_ENABLE:
return FogEnable;
case EMF_NORMALIZE_NORMALS:
return NormalizeNormals;
case EMF_TEXTURE_WRAP:
return !(TextureLayer[0].TextureWrapU ||
TextureLayer[0].TextureWrapV ||
TextureLayer[0].TextureWrapW);
case EMF_ANTI_ALIASING:
return (AntiAliasing==1);
case EMF_COLOR_MASK:
return (ColorMask!=ECP_NONE);
case EMF_COLOR_MATERIAL:
return (ColorMaterial != ECM_NONE);
case EMF_USE_MIP_MAPS:
return UseMipMaps;
case EMF_BLEND_OPERATION:
return BlendOperation != EBO_NONE;
case EMF_BLEND_FACTOR:
return BlendFactor != 0.f;
case EMF_POLYGON_OFFSET:
return PolygonOffsetFactor != 0 || PolygonOffsetDepthBias != 0.f;
}
return false;
}
//! Inequality operator
/** \param b Material to compare to.
\return True if the materials differ, else false. */
inline bool operator!=(const SMaterial& b) const
{
bool different =
MaterialType != b.MaterialType ||
AmbientColor != b.AmbientColor ||
DiffuseColor != b.DiffuseColor ||
EmissiveColor != b.EmissiveColor ||
SpecularColor != b.SpecularColor ||
Shininess != b.Shininess ||
MaterialTypeParam != b.MaterialTypeParam ||
MaterialTypeParam2 != b.MaterialTypeParam2 ||
Thickness != b.Thickness ||
Wireframe != b.Wireframe ||
PointCloud != b.PointCloud ||
GouraudShading != b.GouraudShading ||
Lighting != b.Lighting ||
ZBuffer != b.ZBuffer ||
ZWriteEnable != b.ZWriteEnable ||
BackfaceCulling != b.BackfaceCulling ||
FrontfaceCulling != b.FrontfaceCulling ||
FogEnable != b.FogEnable ||
NormalizeNormals != b.NormalizeNormals ||
AntiAliasing != b.AntiAliasing ||
ColorMask != b.ColorMask ||
ColorMaterial != b.ColorMaterial ||
BlendOperation != b.BlendOperation ||
BlendFactor != b.BlendFactor ||
PolygonOffsetFactor != b.PolygonOffsetFactor ||
PolygonOffsetDirection != b.PolygonOffsetDirection ||
PolygonOffsetDepthBias != b.PolygonOffsetDepthBias ||
PolygonOffsetSlopeScale != b.PolygonOffsetSlopeScale ||
UseMipMaps != b.UseMipMaps
;
for (u32 i=0; (i<MATERIAL_MAX_TEXTURES) && !different; ++i)
{
different |= (TextureLayer[i] != b.TextureLayer[i]);
}
return different;
}
//! Equality operator
/** \param b Material to compare to.
\return True if the materials are equal, else false. */
inline bool operator==(const SMaterial& b) const
{ return !(b!=*this); }
//! Check if material needs alpha blending
bool isAlphaBlendOperation() const
{
if (BlendOperation != EBO_NONE && BlendFactor != 0.f)
{
E_BLEND_FACTOR srcRGBFact = EBF_ZERO;
E_BLEND_FACTOR dstRGBFact = EBF_ZERO;
E_BLEND_FACTOR srcAlphaFact = EBF_ZERO;
E_BLEND_FACTOR dstAlphaFact = EBF_ZERO;
E_MODULATE_FUNC modulo = EMFN_MODULATE_1X;
u32 alphaSource = 0;
unpack_textureBlendFuncSeparate(srcRGBFact, dstRGBFact, srcAlphaFact, dstAlphaFact, modulo, alphaSource, BlendFactor);
if (textureBlendFunc_hasAlpha(srcRGBFact) || textureBlendFunc_hasAlpha(dstRGBFact) ||
textureBlendFunc_hasAlpha(srcAlphaFact) || textureBlendFunc_hasAlpha(dstAlphaFact))
{
return true;
}
}
return false;
}
//! Check for some fixed-function transparent types. Still used internally, but might be deprecated soon.
//! You probably should not use this anymore, IVideoDriver::needsTransparentRenderPass is more useful in most situations
//! as it asks the material renders directly what they do with the material.
bool isTransparent() const
{
if ( MaterialType==EMT_TRANSPARENT_ADD_COLOR ||
MaterialType==EMT_TRANSPARENT_ALPHA_CHANNEL ||
MaterialType==EMT_TRANSPARENT_VERTEX_ALPHA ||
MaterialType==EMT_TRANSPARENT_REFLECTION_2_LAYER )
return true;
return false;
}
};
//! global const identity Material
IRRLICHT_API extern SMaterial IdentityMaterial;
} // end namespace video
} // end namespace irr
#endif
Reference in New Issue View Git Blame Copy Permalink