minetest/src/cavegen.cpp

810 lines
21 KiB
C++
Raw Normal View History

/*
Minetest
Copyright (C) 2010-2013 celeron55, Perttu Ahola <celeron55@gmail.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "util/numeric.h"
#include "map.h"
#include "mapgen.h"
#include "mapgen_v5.h"
2013-04-28 04:40:52 +02:00
#include "mapgen_v6.h"
#include "mapgen_v7.h"
#include "cavegen.h"
NoiseParams nparams_caveliquids(0, 1, v3f(150.0, 150.0, 150.0), 776, 3, 0.6, 2.0);
///////////////////////////////////////// Caves V5
CaveV5::CaveV5(MapgenV5 *mg, PseudoRandom *ps)
{
this->mg = mg;
this->vm = mg->vm;
this->ndef = mg->ndef;
this->water_level = mg->water_level;
this->ps = ps;
2013-04-28 04:40:52 +02:00
this->c_water_source = mg->c_water_source;
this->c_lava_source = mg->c_lava_source;
this->c_ice = mg->c_ice;
this->np_caveliquids = &nparams_caveliquids;
dswitchint = ps->range(1, 14);
flooded = ps->range(1, 2) == 2;
part_max_length_rs = ps->range(2, 4);
tunnel_routepoints = ps->range(5, ps->range(15, 30));
min_tunnel_diameter = 5;
max_tunnel_diameter = ps->range(7, ps->range(8, 24));
large_cave_is_flat = (ps->range(0, 1) == 0);
}
void CaveV5::makeCave(v3s16 nmin, v3s16 nmax, int max_stone_height)
{
node_min = nmin;
node_max = nmax;
main_direction = v3f(0, 0, 0);
// Allowed route area size in nodes
ar = node_max - node_min + v3s16(1, 1, 1);
// Area starting point in nodes
of = node_min;
// Allow a bit more
//(this should be more than the maximum radius of the tunnel)
s16 insure = 10;
s16 more = MYMAX(MAP_BLOCKSIZE - max_tunnel_diameter / 2 - insure, 1);
ar += v3s16(1,0,1) * more * 2;
of -= v3s16(1,0,1) * more;
route_y_min = 0;
// Allow half a diameter + 7 over stone surface
route_y_max = -of.Y + max_stone_y + max_tunnel_diameter / 2 + 7;
// Limit maximum to area
route_y_max = rangelim(route_y_max, 0, ar.Y - 1);
s16 min = 0;
if (node_min.Y < water_level && node_max.Y > water_level) {
min = water_level - max_tunnel_diameter/3 - of.Y;
route_y_max = water_level + max_tunnel_diameter/3 - of.Y;
}
route_y_min = ps->range(min, min + max_tunnel_diameter);
route_y_min = rangelim(route_y_min, 0, route_y_max);
s16 route_start_y_min = route_y_min;
s16 route_start_y_max = route_y_max;
route_start_y_min = rangelim(route_start_y_min, 0, ar.Y - 1);
route_start_y_max = rangelim(route_start_y_max, route_start_y_min, ar.Y - 1);
// Randomize starting position
orp = v3f(
(float)(ps->next() % ar.X) + 0.5,
(float)(ps->range(route_start_y_min, route_start_y_max)) + 0.5,
(float)(ps->next() % ar.Z) + 0.5
);
// Add generation notify begin event
v3s16 abs_pos(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
GenNotifyType notifytype = GENNOTIFY_LARGECAVE_BEGIN;
mg->gennotify.addEvent(notifytype, abs_pos);
// Generate some tunnel starting from orp
for (u16 j = 0; j < tunnel_routepoints; j++)
makeTunnel(j % dswitchint == 0);
// Add generation notify end event
abs_pos = v3s16(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
notifytype = GENNOTIFY_LARGECAVE_END;
mg->gennotify.addEvent(notifytype, abs_pos);
}
void CaveV5::makeTunnel(bool dirswitch)
{
// Randomize size
s16 min_d = min_tunnel_diameter;
s16 max_d = max_tunnel_diameter;
rs = ps->range(min_d, max_d);
s16 rs_part_max_length_rs = rs * part_max_length_rs;
v3s16 maxlen;
maxlen = v3s16(
rs_part_max_length_rs,
rs_part_max_length_rs / 2,
rs_part_max_length_rs
);
v3f vec;
// Jump downward sometimes
vec = v3f(
(float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
(float)(ps->next() % maxlen.Y) - (float)maxlen.Y / 2,
(float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
);
// Do not make caves that are above ground.
// It is only necessary to check the startpoint and endpoint.
v3s16 orpi(orp.X, orp.Y, orp.Z);
v3s16 veci(vec.X, vec.Y, vec.Z);
v3s16 p;
p = orpi + veci + of + rs / 2;
if (p.Z >= node_min.Z && p.Z <= node_max.Z &&
p.X >= node_min.X && p.X <= node_max.X) {
u32 index = (p.Z - node_min.Z) * mg->ystride + (p.X - node_min.X);
s16 h = mg->heightmap[index];
if (h < p.Y)
return;
} else if (p.Y > water_level) {
return; // If it's not in our heightmap, use a simple heuristic
}
p = orpi + of + rs / 2;
if (p.Z >= node_min.Z && p.Z <= node_max.Z &&
p.X >= node_min.X && p.X <= node_max.X) {
u32 index = (p.Z - node_min.Z) * mg->ystride + (p.X - node_min.X);
s16 h = mg->heightmap[index];
if (h < p.Y)
return;
} else if (p.Y > water_level) {
return;
}
vec += main_direction;
v3f rp = orp + vec;
if (rp.X < 0)
rp.X = 0;
else if (rp.X >= ar.X)
rp.X = ar.X - 1;
if (rp.Y < route_y_min)
rp.Y = route_y_min;
else if (rp.Y >= route_y_max)
rp.Y = route_y_max - 1;
if (rp.Z < 0)
rp.Z = 0;
else if (rp.Z >= ar.Z)
rp.Z = ar.Z - 1;
vec = rp - orp;
float veclen = vec.getLength();
2013-04-28 04:40:52 +02:00
if (veclen < 0.05)
veclen = 1.0;
// Every second section is rough
bool randomize_xz = (ps->range(1, 2) == 1);
// Carve routes
for (float f = 0; f < 1.0; f += 1.0 / veclen)
carveRoute(vec, f, randomize_xz);
orp = rp;
}
void CaveV5::carveRoute(v3f vec, float f, bool randomize_xz)
{
MapNode airnode(CONTENT_AIR);
MapNode waternode(c_water_source);
MapNode lavanode(c_lava_source);
v3s16 startp(orp.X, orp.Y, orp.Z);
startp += of;
float nval = NoisePerlin3D(np_caveliquids, startp.X,
startp.Y, startp.Z, mg->seed);
MapNode liquidnode = nval < 0.40 ? lavanode : waternode;
v3f fp = orp + vec * f;
fp.X += 0.1 * ps->range(-10, 10);
fp.Z += 0.1 * ps->range(-10, 10);
v3s16 cp(fp.X, fp.Y, fp.Z);
s16 d0 = -rs/2;
s16 d1 = d0 + rs;
if (randomize_xz) {
d0 += ps->range(-1, 1);
d1 += ps->range(-1, 1);
}
for (s16 z0 = d0; z0 <= d1; z0++) {
s16 si = rs / 2 - MYMAX(0, abs(z0) - rs / 7 - 1);
for (s16 x0 = -si - ps->range(0,1); x0 <= si - 1 + ps->range(0,1); x0++) {
s16 maxabsxz = MYMAX(abs(x0), abs(z0));
s16 si2 = rs / 2 - MYMAX(0, maxabsxz - rs / 7 - 1);
for (s16 y0 = -si2; y0 <= si2; y0++) {
if (large_cave_is_flat) {
// Make large caves not so tall
if (rs > 7 && abs(y0) >= rs / 3)
continue;
}
v3s16 p(cp.X + x0, cp.Y + y0, cp.Z + z0);
p += of;
if (vm->m_area.contains(p) == false)
continue;
u32 i = vm->m_area.index(p);
content_t c = vm->m_data[i].getContent();
if (!ndef->get(c).is_ground_content)
continue;
int full_ymin = node_min.Y - MAP_BLOCKSIZE;
int full_ymax = node_max.Y + MAP_BLOCKSIZE;
if (flooded && full_ymin < water_level &&
full_ymax > water_level)
vm->m_data[i] = (p.Y <= water_level) ?
waternode : airnode;
else if (flooded && full_ymax < water_level)
vm->m_data[i] = (p.Y < startp.Y - 4) ?
liquidnode : airnode;
else
vm->m_data[i] = airnode;
}
}
}
}
2013-04-28 04:40:52 +02:00
///////////////////////////////////////// Caves V6
2013-04-28 04:40:52 +02:00
CaveV6::CaveV6(MapgenV6 *mg, PseudoRandom *ps, PseudoRandom *ps2, bool is_large_cave)
{
this->mg = mg;
this->vm = mg->vm;
this->ndef = mg->ndef;
this->water_level = mg->water_level;
this->large_cave = is_large_cave;
this->ps = ps;
this->ps2 = ps2;
2013-04-28 04:40:52 +02:00
this->c_water_source = mg->c_water_source;
this->c_lava_source = mg->c_lava_source;
min_tunnel_diameter = 2;
max_tunnel_diameter = ps->range(2, 6);
dswitchint = ps->range(1, 14);
flooded = true;
2013-04-28 04:40:52 +02:00
if (large_cave) {
part_max_length_rs = ps->range(2,4);
tunnel_routepoints = ps->range(5, ps->range(15,30));
2013-04-28 04:40:52 +02:00
min_tunnel_diameter = 5;
max_tunnel_diameter = ps->range(7, ps->range(8,24));
2013-04-28 04:40:52 +02:00
} else {
part_max_length_rs = ps->range(2,9);
tunnel_routepoints = ps->range(10, ps->range(15,30));
2013-04-28 04:40:52 +02:00
}
large_cave_is_flat = (ps->range(0,1) == 0);
2013-04-28 04:40:52 +02:00
}
void CaveV6::makeCave(v3s16 nmin, v3s16 nmax, int max_stone_height)
{
2013-04-28 04:40:52 +02:00
node_min = nmin;
node_max = nmax;
max_stone_y = max_stone_height;
main_direction = v3f(0, 0, 0);
// Allowed route area size in nodes
ar = node_max - node_min + v3s16(1, 1, 1);
// Area starting point in nodes
of = node_min;
// Allow a bit more
//(this should be more than the maximum radius of the tunnel)
const s16 max_spread_amount = MAP_BLOCKSIZE;
2013-04-28 04:40:52 +02:00
s16 insure = 10;
s16 more = MYMAX(max_spread_amount - max_tunnel_diameter / 2 - insure, 1);
2013-04-28 04:40:52 +02:00
ar += v3s16(1,0,1) * more * 2;
of -= v3s16(1,0,1) * more;
route_y_min = 0;
// Allow half a diameter + 7 over stone surface
route_y_max = -of.Y + max_stone_y + max_tunnel_diameter / 2 + 7;
// Limit maximum to area
route_y_max = rangelim(route_y_max, 0, ar.Y - 1);
if (large_cave) {
s16 min = 0;
if (node_min.Y < water_level && node_max.Y > water_level) {
min = water_level - max_tunnel_diameter/3 - of.Y;
route_y_max = water_level + max_tunnel_diameter/3 - of.Y;
}
route_y_min = ps->range(min, min + max_tunnel_diameter);
route_y_min = rangelim(route_y_min, 0, route_y_max);
}
s16 route_start_y_min = route_y_min;
s16 route_start_y_max = route_y_max;
route_start_y_min = rangelim(route_start_y_min, 0, ar.Y-1);
route_start_y_max = rangelim(route_start_y_max, route_start_y_min, ar.Y-1);
2013-04-28 04:40:52 +02:00
// Randomize starting position
orp = v3f(
(float)(ps->next() % ar.X) + 0.5,
(float)(ps->range(route_start_y_min, route_start_y_max)) + 0.5,
(float)(ps->next() % ar.Z) + 0.5
);
// Add generation notify begin event
v3s16 abs_pos(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
GenNotifyType notifytype = large_cave ?
GENNOTIFY_LARGECAVE_BEGIN : GENNOTIFY_CAVE_BEGIN;
mg->gennotify.addEvent(notifytype, abs_pos);
2013-04-28 04:40:52 +02:00
// Generate some tunnel starting from orp
for (u16 j = 0; j < tunnel_routepoints; j++)
makeTunnel(j % dswitchint == 0);
// Add generation notify end event
abs_pos = v3s16(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
notifytype = large_cave ?
GENNOTIFY_LARGECAVE_END : GENNOTIFY_CAVE_END;
mg->gennotify.addEvent(notifytype, abs_pos);
2013-04-28 04:40:52 +02:00
}
void CaveV6::makeTunnel(bool dirswitch)
{
2013-04-28 04:40:52 +02:00
if (dirswitch && !large_cave) {
main_direction = v3f(
((float)(ps->next() % 20) - (float)10) / 10,
((float)(ps->next() % 20) - (float)10) / 30,
((float)(ps->next() % 20) - (float)10) / 10
);
main_direction *= (float)ps->range(0, 10) / 10;
}
// Randomize size
s16 min_d = min_tunnel_diameter;
s16 max_d = max_tunnel_diameter;
rs = ps->range(min_d, max_d);
s16 rs_part_max_length_rs = rs * part_max_length_rs;
2013-04-28 04:40:52 +02:00
v3s16 maxlen;
if (large_cave) {
maxlen = v3s16(
rs_part_max_length_rs,
rs_part_max_length_rs / 2,
rs_part_max_length_rs
2013-04-28 04:40:52 +02:00
);
} else {
maxlen = v3s16(
rs_part_max_length_rs,
ps->range(1, rs_part_max_length_rs),
rs_part_max_length_rs
2013-04-28 04:40:52 +02:00
);
}
v3f vec(
(float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
(float)(ps->next() % maxlen.Y) - (float)maxlen.Y / 2,
(float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
);
2013-04-28 04:40:52 +02:00
// Jump downward sometimes
if (!large_cave && ps->range(0, 12) == 0) {
vec = v3f(
(float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
2013-04-28 04:40:52 +02:00
(float)(ps->next() % (maxlen.Y * 2)) - (float)maxlen.Y,
(float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
2013-04-28 04:40:52 +02:00
);
}
// Do not make caves that are entirely above ground, to fix
// shadow bugs caused by overgenerated large caves.
2013-04-28 04:40:52 +02:00
// It is only necessary to check the startpoint and endpoint.
v3s16 orpi(orp.X, orp.Y, orp.Z);
v3s16 veci(vec.X, vec.Y, vec.Z);
s16 h1;
s16 h2;
v3s16 p1 = orpi + veci + of + rs / 2;
if (p1.Z >= node_min.Z && p1.Z <= node_max.Z &&
p1.X >= node_min.X && p1.X <= node_max.X) {
u32 index1 = (p1.Z - node_min.Z) * mg->ystride +
(p1.X - node_min.X);
h1 = mg->heightmap[index1];
} else {
h1 = water_level; // If not in heightmap
}
v3s16 p2 = orpi + of + rs / 2;
if (p2.Z >= node_min.Z && p2.Z <= node_max.Z &&
p2.X >= node_min.X && p2.X <= node_max.X) {
u32 index2 = (p2.Z - node_min.Z) * mg->ystride +
(p2.X - node_min.X);
h2 = mg->heightmap[index2];
} else {
h2 = water_level;
2013-04-28 04:40:52 +02:00
}
// If startpoint and endpoint are above ground,
// disable placing of nodes in carveRoute while
// still running all pseudorandom calls to ensure
// caves consistent with existing worlds.
bool tunnel_above_ground = p1.Y > h1 && p2.Y > h2;
2013-04-28 04:40:52 +02:00
vec += main_direction;
v3f rp = orp + vec;
if (rp.X < 0)
rp.X = 0;
else if (rp.X >= ar.X)
rp.X = ar.X - 1;
2013-04-28 04:40:52 +02:00
if (rp.Y < route_y_min)
rp.Y = route_y_min;
else if (rp.Y >= route_y_max)
rp.Y = route_y_max - 1;
2013-04-28 04:40:52 +02:00
if (rp.Z < 0)
rp.Z = 0;
else if (rp.Z >= ar.Z)
rp.Z = ar.Z - 1;
2013-04-28 04:40:52 +02:00
vec = rp - orp;
float veclen = vec.getLength();
// As odd as it sounds, veclen is *exactly* 0.0 sometimes, causing a FPE
2013-04-28 04:40:52 +02:00
if (veclen < 0.05)
veclen = 1.0;
2013-04-28 04:40:52 +02:00
// Every second section is rough
bool randomize_xz = (ps2->range(1, 2) == 1);
2013-04-28 04:40:52 +02:00
// Carve routes
for (float f = 0; f < 1.0; f += 1.0 / veclen)
carveRoute(vec, f, randomize_xz, tunnel_above_ground);
2013-04-28 04:40:52 +02:00
orp = rp;
}
void CaveV6::carveRoute(v3f vec, float f, bool randomize_xz, bool tunnel_above_ground)
{
2013-04-28 04:40:52 +02:00
MapNode airnode(CONTENT_AIR);
MapNode waternode(c_water_source);
MapNode lavanode(c_lava_source);
2013-04-28 04:40:52 +02:00
v3s16 startp(orp.X, orp.Y, orp.Z);
startp += of;
2013-04-28 04:40:52 +02:00
v3f fp = orp + vec * f;
fp.X += 0.1 * ps->range(-10, 10);
fp.Z += 0.1 * ps->range(-10, 10);
v3s16 cp(fp.X, fp.Y, fp.Z);
s16 d0 = -rs/2;
s16 d1 = d0 + rs;
if (randomize_xz) {
d0 += ps->range(-1, 1);
d1 += ps->range(-1, 1);
}
2013-04-28 04:40:52 +02:00
for (s16 z0 = d0; z0 <= d1; z0++) {
s16 si = rs / 2 - MYMAX(0, abs(z0) - rs / 7 - 1);
for (s16 x0 = -si - ps->range(0,1); x0 <= si - 1 + ps->range(0,1); x0++) {
if (tunnel_above_ground)
continue;
2013-04-28 04:40:52 +02:00
s16 maxabsxz = MYMAX(abs(x0), abs(z0));
s16 si2 = rs / 2 - MYMAX(0, maxabsxz - rs / 7 - 1);
2013-04-28 04:40:52 +02:00
for (s16 y0 = -si2; y0 <= si2; y0++) {
if (large_cave_is_flat) {
// Make large caves not so tall
if (rs > 7 && abs(y0) >= rs / 3)
continue;
}
v3s16 p(cp.X + x0, cp.Y + y0, cp.Z + z0);
p += of;
2013-04-28 04:40:52 +02:00
if (vm->m_area.contains(p) == false)
continue;
u32 i = vm->m_area.index(p);
content_t c = vm->m_data[i].getContent();
if (!ndef->get(c).is_ground_content)
2013-04-28 04:40:52 +02:00
continue;
2013-04-28 04:40:52 +02:00
if (large_cave) {
int full_ymin = node_min.Y - MAP_BLOCKSIZE;
int full_ymax = node_max.Y + MAP_BLOCKSIZE;
if (flooded && full_ymin < water_level &&
full_ymax > water_level) {
vm->m_data[i] = (p.Y <= water_level) ?
waternode : airnode;
} else if (flooded && full_ymax < water_level) {
vm->m_data[i] = (p.Y < startp.Y - 2) ?
lavanode : airnode;
} else {
2013-04-28 04:40:52 +02:00
vm->m_data[i] = airnode;
}
2013-04-28 04:40:52 +02:00
} else {
if (c == CONTENT_IGNORE || c == CONTENT_AIR)
continue;
2013-04-28 04:40:52 +02:00
vm->m_data[i] = airnode;
vm->m_flags[i] |= VMANIP_FLAG_CAVE;
}
}
}
}
}
///////////////////////////////////////// Caves V7
CaveV7::CaveV7(MapgenV7 *mg, PseudoRandom *ps)
{
this->mg = mg;
this->vm = mg->vm;
this->ndef = mg->ndef;
this->water_level = mg->water_level;
this->ps = ps;
this->c_water_source = mg->c_water_source;
this->c_lava_source = mg->c_lava_source;
this->c_ice = mg->c_ice;
this->np_caveliquids = &nparams_caveliquids;
dswitchint = ps->range(1, 14);
flooded = ps->range(1, 2) == 2;
part_max_length_rs = ps->range(2, 4);
tunnel_routepoints = ps->range(5, ps->range(15, 30));
min_tunnel_diameter = 5;
max_tunnel_diameter = ps->range(7, ps->range(8, 24));
large_cave_is_flat = (ps->range(0, 1) == 0);
}
void CaveV7::makeCave(v3s16 nmin, v3s16 nmax, int max_stone_height)
{
node_min = nmin;
node_max = nmax;
max_stone_y = max_stone_height;
main_direction = v3f(0, 0, 0);
// Allowed route area size in nodes
ar = node_max - node_min + v3s16(1, 1, 1);
// Area starting point in nodes
of = node_min;
// Allow a bit more
//(this should be more than the maximum radius of the tunnel)
s16 insure = 10;
s16 more = MYMAX(MAP_BLOCKSIZE - max_tunnel_diameter / 2 - insure, 1);
ar += v3s16(1,0,1) * more * 2;
of -= v3s16(1,0,1) * more;
route_y_min = 0;
// Allow half a diameter + 7 over stone surface
route_y_max = -of.Y + max_stone_y + max_tunnel_diameter / 2 + 7;
// Limit maximum to area
route_y_max = rangelim(route_y_max, 0, ar.Y - 1);
s16 min = 0;
if (node_min.Y < water_level && node_max.Y > water_level) {
min = water_level - max_tunnel_diameter/3 - of.Y;
route_y_max = water_level + max_tunnel_diameter/3 - of.Y;
}
route_y_min = ps->range(min, min + max_tunnel_diameter);
route_y_min = rangelim(route_y_min, 0, route_y_max);
s16 route_start_y_min = route_y_min;
s16 route_start_y_max = route_y_max;
route_start_y_min = rangelim(route_start_y_min, 0, ar.Y - 1);
route_start_y_max = rangelim(route_start_y_max, route_start_y_min, ar.Y - 1);
// Randomize starting position
orp = v3f(
(float)(ps->next() % ar.X) + 0.5,
(float)(ps->range(route_start_y_min, route_start_y_max)) + 0.5,
(float)(ps->next() % ar.Z) + 0.5
);
// Add generation notify begin event
v3s16 abs_pos(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
GenNotifyType notifytype = GENNOTIFY_LARGECAVE_BEGIN;
mg->gennotify.addEvent(notifytype, abs_pos);
// Generate some tunnel starting from orp
for (u16 j = 0; j < tunnel_routepoints; j++)
makeTunnel(j % dswitchint == 0);
// Add generation notify end event
abs_pos = v3s16(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
notifytype = GENNOTIFY_LARGECAVE_END;
mg->gennotify.addEvent(notifytype, abs_pos);
}
void CaveV7::makeTunnel(bool dirswitch)
{
// Randomize size
s16 min_d = min_tunnel_diameter;
s16 max_d = max_tunnel_diameter;
rs = ps->range(min_d, max_d);
s16 rs_part_max_length_rs = rs * part_max_length_rs;
v3s16 maxlen;
maxlen = v3s16(
rs_part_max_length_rs,
rs_part_max_length_rs / 2,
rs_part_max_length_rs
);
v3f vec;
// Jump downward sometimes
vec = v3f(
(float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
(float)(ps->next() % maxlen.Y) - (float)maxlen.Y / 2,
(float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
);
// Do not make caves that are above ground.
// It is only necessary to check the startpoint and endpoint.
v3s16 orpi(orp.X, orp.Y, orp.Z);
v3s16 veci(vec.X, vec.Y, vec.Z);
v3s16 p;
p = orpi + veci + of + rs / 2;
if (p.Z >= node_min.Z && p.Z <= node_max.Z &&
p.X >= node_min.X && p.X <= node_max.X) {
u32 index = (p.Z - node_min.Z) * mg->ystride + (p.X - node_min.X);
s16 h = mg->ridge_heightmap[index];
if (h < p.Y)
return;
} else if (p.Y > water_level) {
return; // If it's not in our heightmap, use a simple heuristic
}
p = orpi + of + rs / 2;
if (p.Z >= node_min.Z && p.Z <= node_max.Z &&
p.X >= node_min.X && p.X <= node_max.X) {
u32 index = (p.Z - node_min.Z) * mg->ystride + (p.X - node_min.X);
s16 h = mg->ridge_heightmap[index];
if (h < p.Y)
return;
} else if (p.Y > water_level) {
return;
}
vec += main_direction;
v3f rp = orp + vec;
if (rp.X < 0)
rp.X = 0;
else if (rp.X >= ar.X)
rp.X = ar.X - 1;
if (rp.Y < route_y_min)
rp.Y = route_y_min;
else if (rp.Y >= route_y_max)
rp.Y = route_y_max - 1;
if (rp.Z < 0)
rp.Z = 0;
else if (rp.Z >= ar.Z)
rp.Z = ar.Z - 1;
vec = rp - orp;
float veclen = vec.getLength();
if (veclen < 0.05)
veclen = 1.0;
// Every second section is rough
bool randomize_xz = (ps->range(1, 2) == 1);
// Carve routes
for (float f = 0; f < 1.0; f += 1.0 / veclen)
carveRoute(vec, f, randomize_xz);
orp = rp;
}
void CaveV7::carveRoute(v3f vec, float f, bool randomize_xz)
{
MapNode airnode(CONTENT_AIR);
MapNode waternode(c_water_source);
MapNode lavanode(c_lava_source);
v3s16 startp(orp.X, orp.Y, orp.Z);
startp += of;
float nval = NoisePerlin3D(np_caveliquids, startp.X,
startp.Y, startp.Z, mg->seed);
MapNode liquidnode = (nval < 0.40 && node_max.Y < MGV7_LAVA_DEPTH) ?
lavanode : waternode;
v3f fp = orp + vec * f;
fp.X += 0.1 * ps->range(-10, 10);
fp.Z += 0.1 * ps->range(-10, 10);
v3s16 cp(fp.X, fp.Y, fp.Z);
s16 d0 = -rs/2;
s16 d1 = d0 + rs;
if (randomize_xz) {
d0 += ps->range(-1, 1);
d1 += ps->range(-1, 1);
}
for (s16 z0 = d0; z0 <= d1; z0++) {
s16 si = rs / 2 - MYMAX(0, abs(z0) - rs / 7 - 1);
for (s16 x0 = -si - ps->range(0,1); x0 <= si - 1 + ps->range(0,1); x0++) {
s16 maxabsxz = MYMAX(abs(x0), abs(z0));
s16 si2 = rs / 2 - MYMAX(0, maxabsxz - rs / 7 - 1);
for (s16 y0 = -si2; y0 <= si2; y0++) {
if (large_cave_is_flat) {
// Make large caves not so tall
if (rs > 7 && abs(y0) >= rs / 3)
continue;
}
v3s16 p(cp.X + x0, cp.Y + y0, cp.Z + z0);
p += of;
if (vm->m_area.contains(p) == false)
continue;
u32 i = vm->m_area.index(p);
content_t c = vm->m_data[i].getContent();
if (!ndef->get(c).is_ground_content)
continue;
int full_ymin = node_min.Y - MAP_BLOCKSIZE;
int full_ymax = node_max.Y + MAP_BLOCKSIZE;
if (flooded && full_ymin < water_level &&
full_ymax > water_level)
vm->m_data[i] = (p.Y <= water_level) ?
waternode : airnode;
else if (flooded && full_ymax < water_level)
vm->m_data[i] = (p.Y < startp.Y - 4) ?
liquidnode : airnode;
else
vm->m_data[i] = airnode;
}
}
}
}