1. Pass current camera offset to shader, so shader have access to the global coordinates
2. Pass animation timer to fragment shader. C++ code is already there, just wasn't declared in the shader
3. Delay animation timer wrap-around (from 100s to about 16 minutes)
The setting now accepts values between 1 and 8 in the
Advanced Settings menu.
Values 0 and 1 now behave the same way (setting it to 1 won't
disable MSAA anymore), so there's no need to expose 0 as a value.
This closes #8939.
While preserving the general character of dungeon structure.
Slightly increase the range of standard room horizontal size, while
preserving the average horizontal size.
Return to classic maximum large room size of 16x16x16.
Make 1 in 4 dungeons have a 1 in 8 chance for each room being 'large',
making multiple large rooms possible for the first time.
Make 1 in 8 dungeons allow diagonal corridors, to make these a little
more common.
Make corridor width vary from 1 to 2, but forced to 2 if diagonal
corridors are allowed, to make them passable.
Add some comments.
Safety-guards for CSM callbacks to abort on a bad implementation
Only run callbacks when the mods are loaded (and with it: builtin)
Duplication checks inside constructors
Before opening the file for writing, its file size is tested. If it exceeds 50 MB, it is moved to debut.txt.1, otherwise the log is appended to the old messages. An old debut.txt.1 is removed if it already exists.
Calculate 'i' inside 'y' loop to avoid 'i' and 'y' becoming
out of step due to the uses of 'continue'.
Simplify calculation of 'p2d' when coordinates are inverted.
Remove some unnecessary and unreliable 'index out of
voxelmanip' checks.
Move calculation of '&em' out of loops.
For 'Loop further down until not air' code, use y coordinate
to detect being out of voxelmanip, instead of checking index
which did not detect that.
Add and improve comments.
Indent the 'for (;; y--) {' loop.
Improve format and fix codestyle issues.
This change reduces the amount of sent data towards clients. Inventory lists that are already known to the player are skipped, saving quite some data over time.
Raises protocol version to 38 to ensure correct backwards-compatible code.
In MapgenV6::flowMud(), the previous implementation of coordinate
inversion caused the 2 inverted mudflow iterations (out of the 3
iterations) to not loop over the area, so only 1 non-inverted
iteration occurred.
Fix this bug but only iterate mudflow twice, as mapgen v6 has only
had 1 iteration for many years. There is now a good balance of 1
non-inverted iteration and 1 inverted iteration.
* Fix unnecessary exception use in Server::SendBlocks
The code in this method calls getBlockNoCreate and then
messes around with try...catch to skip blocks which are not
in the memory. Additionally, it repeatedly calls
m_env.getMap() inside this loop. Speed the code up by
extracting the m_env.getMap() out of the loop and getting
rid of the try...catch.
* Fix unnecessary exception use in Server::SendBlock
Another unnecessary try...catch is slowing down
Server::SendBlock. Remove that to speed it up and get a nice
side effect of simplifying the code in question.
* Fix unnecessary exception use in MMVManip::initialEmerge
Remove another unneeded exception usage from
MMVManip::initialEmerge to speed that code up and simplify
it but be careful to not remove the braces as there is a
TimeTaker in use there.
The Map::getSectorNoGenerate throws an exception but no other
code is really dependent on that. Fix the odd instance of
misuse in ClientMap::emergeSector and remove the exception
throwing version of the method along with the "NoEx" suffixes
in the names of these methods.
Update the profiler names to make more sense of what they actually represent
Move the profiler code from header to its source file
Use monospace font to align lines
Format the statistics line to align better with surrounding values
Refresh the profiler each 3 seconds (roughly)
The isNodeUnderground calls getBlockNoCreate which calls
getBlockNoCreateNoEx and throws InvalidPositionException
if the returned value is nullptr, which isNodeUnderground
then catches to return "false". Remove the try..catch in
isNodeUnderground by calling getBlockNoCreateNoEx instead
of getBlockNoCreate and checking the returned value for
nullptr.
Pointers shall be set to nullptr, not 0, according to the
coding standards. By implication they shall be compared with
nullptr, not 0, too. Fix this code to match that.
This fixes overridden items keeping their old groups in the group to
items mapping even after their groups have been changed in lua.
It also prevents a more widespread issue where overriding an item
will add its content ID *twice* to the mapping, resulting in odd
behaviour in features such as ABMs.
This fix consists of two parts:
- Clear the list of stored entities. This has no side-effects.
- Catch the case where active entities exist and print a message.
Clearing the active entitiy list has side-effects that should
be handled. (those entities are known to the environment and
to clients).
As avoiding those side-effects is more complex, and as this
problem is not expected to occur (with PR #4847 merged), there
is no real incentive to implement this ATM.
This issue was a contributing factor to bug #4217. With the other
contributing factor removed (PR #4847), this commit makes sure this
factor does not go unnoticed if it ever happens again.
The commit 526a9e4b66 breaks
the non-GLES2 setups because the code that is intended to
handle that is behind "elseif()" which is interpreted as
"elseif(false)" and thus the code never gets executed. Fix
that by changing the offending line to else().
Additionally, to avoid breaking the server only build
(which shall not have a dependency on GL/GLU/GLES at all),
enclose the entire block code in if(BUILD_CLIENT).
* Fix some issues with minetest.clear_craft
- Fix memory leak
- Fix crafts with an output count not being cleared when clearing by
input.
- Fix recipe list being reversed when clearing by input.
* Add CraftInput::empty()
Avoid an unsuitable spawn position (which if outside mapgen limits can
cause a crash) if the main 0-3999 loop reaches its end. Fallback to a
spawn at 0,0,0.
Check the mapgen-returned 'spawn_level' value for being outside limits.
When 'air_count' reaches 2, move back down 1 to spawn in the lower
empty node.
If the spawn position is disallowed by 'objectpos_over_limit()', 'break'
from loop instead of 'continue' because positions above are probably
also over limit.
Reset 'air_count' to 0 if an obstruction is found, to make 'air_count'
consecutive empty nodes.
Allow spawn in 'airlike' drawtype nodes such as mod-added vacuum,
alien atmospheres, fog etc.
Add clarifying comments and improve codestyle.
This fixes an issue where when the engine looked up groups (for example,
in ABM node names), NodeDefManager's m_group_to_items would contain nodes
with a group value of zero, resulting in nodes with flammable = 0 being
burned by a fire mod with a group:flammable checking ABM.
It brings consistency to the behaviour described in the api
documentation, where zero and nil groups should be the same.
Previously, this wrongly returned ground level (a position containing
a solid node) as spawn level.
Return ground level + 2 (+ 2 to spawn above biome 'dust' nodes).
Improve codestyle and make more consistent with generateTerrain().
Due to commit ec3142a , UnitSAO's getArmorGroups() did not match
ServerActiveObject's, notably resulting in the lua get_armor_groups() call
returning nothing.
Document new meaning of immortal=1 for players
Disable breathing if player is immortal
Hide builtin statbars if player immortal (delayed)
Co-authored-by: ClobberXD <ClobberXD@gmail.com>
This prevents set_properties() calls that have nothing to do with hp_max or breath_max overriding the saved hp before another mod has the chance to set a player's intended hp_max (such as in on_joinplayer).
What happened:
1) Object data is received. Client begins to read the data
2) Client initializes all its children (gob_cmd_update_infant)
3) Children try to attach to parent (yet not added)
4) Parent initializes, is added to the environment
And somewhere in between, Irrlicht wrecks up the attachments due to the missing matrix node.
The solution here is to:
1) Use the same structure as ServerActiveObject
2) Attach all children after the parent is really initialized
v6 always last to discourage selection.
Special mapgens flat, fractal, singlenode, next to last. Of these, singlenode
last to discourage selection.
Of the remaining, v5 last due to age, v7 first due to being the default.
Re-add the random size range for large rooms.
Remove 'first_room_large' bool.
Add 'large_room_chance' parameter that can disable large rooms,
specify 1 large room, or specify a chance for large rooms.
If 1 or a chance is specified, the first generated room is large,
to take advantage of the intersection checks that are done for the
1st room only.
Move 'num_dungeons' to 'DungeonParams'.
Add new parameter 'num_rooms' to replace 'rooms_min' and 'rooms_max',
so that the mapgen has complete control over the number of rooms.
Add new bool 'first_room_large' so that the mapgen chooses this
instead of a hardcoded 1 in 4 chance.
Add new parameter 'room_size_large' to replace 'room_size_large_min'
and 'room_size_large_max', so that the mapgen has complete control
over this.
Biome-defined dungeon nodes was added as a feature to MT 5.0.0.
So now remove most of the hardcoded dungeon node code that assumes a
game has stone, sandstone, desert stone, and no other stone types.
If biome-defined dungeon nodes are not found, dungeon nodes fall back
to the 'cobble' mapgen alias if present, if not present they fall back
to biome-defined 'stone'.
Remove now-unnecessary mapgen aliases from MapgenBasic. Non-mgv6 games
now only need to define 3 to 5 mapgen aliases.
Document dungeon parameters.
Make c_lava_source fallback to c_water_source as both are used as cave
liquids.
They verify the provided value and error if a wrong value got provided
command line description for color was differnt on win32 but code did not handle any differenc
extended the command line description for world and worldname that it is clear that they only start a local game if used with --go
Fixes #7875
Rivers are disabled by default and will not be added to existing worlds.
Rewrite getSpawnLevelAtPoint() to be simpler and more consistent with
generateTerrain().
Add user-settable noise parameters for dungeon density to each mapgen,
except V6 which hardcodes this noise parameter.
Move the calculation of number of dungeons generated in a mapchunk out
of dungeongen.cpp and into mapgen code, to allow mapgens to generate
any desired number of dungeons in a mapchunk, instead of being forced
to have number of dungeons determined by a density noise.
This is more flexible and allows mapgens to use dungeon generation to
create custom structures, such as occasional mega-dungeons.
The old texture modifier is restored by passing `m_previous_texture_modifier`.
Either copy it manually or let the function parameter do that.
Victims so far:
8e0b80a Apr 2018
eb2bda7 May 2019
When multiple recipes are applicable, the recipes are prioritised in this order:
toolrepair < shapeless with groups < shapeless < shaped with groups < shaped
For cooking and fuel, items are prioritised over item groups
This allows games to specify biome cave liquids and avoid the old
hardcoded behaviour, but preserves the ability to have multiple
cave liquids in one biome, such as lava and water.
When multiple cave liquids are defined by the biome definition,
make each entire cave use a randomly chosen liquid, instead of
every small cave segment using a randomly chosen liquid.
Plus an optimisation:
Don't place nodes if cave liquid is defined as 'air'
* Optimize statbar drawing
The texture name of the statbar is a string passed by value.
That slows down the client and creates litter in the heap
as the content of the string is allocated there. Convert the
offending parameter to a const reference to avoid the
performance hit.
* Optimize texture cache
There is an unnecessary temporary created when the texture
path is being generated. This slows down the cache each time
a new texture is encountered and it needs to be loaded into
the cache. Additionally, the heap litter created by this
unnecessary temporary is particularly troublesome here as
the following code then piles another string (the resulting
full path of the texture) on top of it, followed by the
texture itself, which both are quite long term objects as
they are subsequently inserted into the cache where they can
remain for quite a while (especially if the texture turns
out to be a common one like dirt, grass or stone).
Use std::string.append to get rid of the temporary which
solves both issues (speed and heap fragmentation).
* Optimize animations in client
Each time an animated node is updated, an unnecessary copy of
the texture name is created, littering the heap with lots of
fragments. This can be specifically troublesome when looking
at oceans or large lava lakes as both of these nodes are
usually animated (the lava animation is pretty visible).
Convert the parameter of GenericCAO::updateTextures to a
const reference to get rid of the unnecessary copy.
There is a comment stating "std::string copy is mandatory as
mod can be a class member and there is a swap on those class
members ... do NOT pass by reference", reinforcing the
belief that the unnecessary copy is in fact necessary.
However one of the first things the code of the method does
is to assign the parameter to its class member, creating
another copy. By rearranging the code a little bit this
"another copy" can then be used by the subsequent code,
getting rid of the need to pass the parameter by value and
thus saving that copying effort.
* Optimize chat console history handling
The GUIChatConsole::replaceAndAddToHistory was getting the
line to work on by value which turns out to be unnecessary.
Get rid of that unnecessary copy by converting the parameter
to a const reference.
* Optimize gui texture setting
The code used to set the texture for GUI components was
getting the name of the texture by value, creating
unnecessary performance bottleneck for mods/games with
heavily textured GUIs. Get rid of the bottleneck by passing
the texture name as a const reference.
* Optimize sound playing code in GUIEngine
The GUIEngine's code receives the specification of the sound
to be played by value, which turns out to be most likely a
mistake as the underlying sound manager interface receives
the same thing by reference. Convert the offending parameter
to a const reference to get rid of the rather bulky copying
effort and the associated performance hit.
* Silence CLANG TIDY warnings for unit tests
Change "std::string" to "const std::string &" to avoid an
unnecessary local value copy, silencing the CLANG TIDY
process.
* Optimize formspec handling
The "formspec prepend" parameter was passed to the formspec
handling code by value, creating unnecessary copy of
std::string and slowing down the game if mods add things like
textured backgrounds for the player inventory and/or other
forms. Get rid of that performance bottleneck by converting
the parameter to a const reference.
* Optimize hotbar image handling
The code that sets the background images for the hotbar is
getting the name of the image by value, creating an
unnecessary std::string copying effort. Fix that by
converting the relevant parameters to const references.
* Optimize inventory deserialization
The inventory manager deserialization code gets the
serialized version of the inventory by value, slowing the
server and the client down when there are inventory updates.
This can get particularly troublesome with pipeworks which
adds nodes that can mess around with inventories
automatically or with mods that have mobs with inventories
that actively use them.
* Optimize texture scaling cache
There is an io::path parameter passed by value in the
procedure used to add images converted from textures,
leading to slowdown when the image is not yet created and
the conversion is thus needed. The performance hit is
quite significant as io::path is similar to std::string
so convert the parameter to a const reference to get rid of
it.
* Optimize translation file loader
Use "std::string::append" when calculating the final index
for the translation table to avoid unnecessary temporary
strings. This speeds the translation file loader up
significantly as std::string uses heap allocation which
tends to be rather slow. Additionally, the heap is no
longer being littered by these unnecessary string
temporaries, increasing performance of code that gets
executed after the translation file loader finishes.
* Optimize server map saving
When the directory structure for the world data is created
during server map saving, an unnecessary value passing of
the directory name slows things down. Remove that overhead
by converting the offending parameter to a const reference.
rubenwardy
lhofhansl
SmallJoker
sfan5
DS-Minetest
Anand S
SmallJoker
Hugo Locurcio
Paramat
updatepo.sh
HybridDog
Muhammad Rifqi Priyo Susanto
Pedro Gimeno
Paul Ouellette
theviper121
upsilon
Jozef Behran
Beha
Rogier
Wuzzy
Methacrylon
Pierre-Yves Rollo
y
Lars Hofhansl
Vitaliy
v-rob
Markus Mattes
stujones11
adrido
David G