Make lava cooling ABM use a new group 'group:cools_lava'.
Nodes other than water can cool lava. We assume snowblock and ice melt,
turn to water and cool lava.
Leave 'group:water' present temporarily to not break mod liquids.
This fixes all cases where the color profile was broken, and
libpng warns about. It also makes almost all textures indexed
instead of RGB where possible (textures that don't have
semi-transparent pixels).
A deeper, darker level of leaves is created by tiling the texture
2 by 2, reducing brightness and offsetting this.
For a denser leaf appearence with the 'simple leaves' setting.
Also used for acacia bush leaves.
This plays when damage is disabled, an engine bug.
We can remove it because both sounds are identical, now it is removed
the 'player damage' sound still plays when falling damage is taken.
To allow mapgen bushes in green-grass and savanna grasslands.
Nodes for a generic bush and an acacia bush.
Stem nodes are craftable to a single wood node to provide a small
amount of wood resource in grasslands.
Fuel times are that of corresponding 'wood' nodes, 1/4 that of
corresponding tree nodes.
No leafdecay to enable use as hedges or without a nearby tree trunk.
Uses 'default leaves simple' texture for extra visual thickness.
Use 'player damage' sound for both damage and falling damage.
Gains for damage sounds are set in the engine, however we cannot change
those gains as other subgames already use damage sounds based on those
gains.
Sound has been re-edited from source and normalised to 0 dB for
maximum volume, which is only just enough because gain is fixed at 0.5
in the engine.
The check for igniters (fire/lava) will be performed every 10 secs
if the item is flammable.
if the item is found to be in lava it will then burn up and
disappear in a smoke puff.
If a non-lava igniter node is found, a combination of `flammable`
value of the item and `igniter` group value of the node will be used
to determine the chance for the item to be removed.
'jungleleaves simple' had completely different leaf colours to
'jungleleaves', now matched.
'leaves simple' had dark green instead of black colour for transparent
pixels (the 'leaves' texture uses black), normally these pixels would
not be rendered as opaque colours but bush nodes now use this texture
and will be rendering it as opaque. The dark green pixels resulted in
a texture lacking in contrast.
Credit to tenplus1 for the suggestion to generalise for mod use.
Mods can add mod nodes to 'group:spreading_dirt_type' enabling the
function to work with mod nodes.
Add some nodes to this group.
Removing 'dirt_with_grass' etc. from 'neighbors' stops the ABM action
running everywhere and constantly, on the dirt nodes immediately below
the surface nodes. Now the action only runs in the rare case of a dirt
node with neighbouring air, grass decorations or snow.
Remove check for air above to allow grass to spread under light-
transmitting nodes such as fences, walls, plants. This causes spread
under slabs, stairs and glass, when near air, but seems worth it.
Remove unnecessary check for nil node.
Retain definitions for node groups to support mods.
Burn time is unchanged for applewood, and increases in the order:
aspen, pine, apple, acacia, jungle which is also the order of wood
colour darkness.
Indicate in the infotext when a furnace has filled up `dst` but still
has fuel. The info text shows the item as 100% with added "(output
full)" text, indicating that while it can cook the item, there is no
place for it in the `dst`. Emptying the `dst` should make the item
cook immediately and furnace resume normal operation.
Make the softer woods, pine and aspen, 'flammable = 3'.
Correct inconsistent flammability of wood and stairs in relation
to all other solid wood nodes in MTGame.
Make the the softer woods, pine and aspen, 'choppy = 3'.
With thanks to contributor tenplus1
Remove leaf cache and globalstep accumulator limiter
Use 'pos' instead of 'p0'
Remove non-essential 'group:liquid' from 'neighbors'
Increase chance value to 10 to compensate for disabled cache
Disable 'catch-up' to avoid the ABM often becoming 10 times more
intensive
Remove use of 'do preserve' bool, instead simply 'return'
Remove unnecessary checks for 'd' and 'd == 0'
Don't 'get' n0, use already present 'node' instead
Swap order two conditionals so that the one most likely is first
Allows walking in, and prevents being trapped in, 2 node high spaces.
Simulates player's feet sinking into snow.
Easier jumping up onto nodes with snow.
Add a global 'intersects protection' function to functions.lua for
checking if a specified volume intersects with a protected volume.
A 3D lattice of points are checked with an adjustable interval.
Add a global 'sapling on place' function to avoid duplicated code in
nodes.lua.
Nyancats are independent in the default mod. Nothing else uses them or
their code. Separating it into a separate mod makes it easier for
subgames to remove them. It also makes it easier for a mod to depend
on nyancats, as lots of subgames don't have them.
Default/mapgen.lua: Register biomes, ores and decorations in
singlenode mapgen. These were never disabled anyway because
singlenode was removed from the world creation menu.
* Unused variables
* Unused values (assigned to variables, but overwritten before use)
* Defining already defined variables instead of reassigning to them.
Preserve overlapping registrations of large and small clusters
below y = -64 but now extend the small clusters up to y = 0 (the
previous highest iron ore level) in a similar to way to coal
Re-order registrations
Add and improve comments
Change sand blob ymax to 0 as sand does not always rise above 0
Remove dirt blobs from sandstone as it is unsuitable for
many sandstone biomes and ugly in stony sandstone desert
Change ymax of first iron region to 0
Allow many crafted nodes to be rotated in any way possible.
These blocks all have slab and stair versions, which can create awkward
patterns if placed together. By allowing these to be rotated players
can create new patterns and appearances that were not before possible.
Since this wasn't possible before, there won't be any effect
to existing builds, as param2 should always be '0'. The current
screwdriver mod also refuses to rotate and alter param2, so this is
safe to enable from now on.
Personally, since these are all *crafted* nodes to begin with, it
should be apparent that they can be rotated to begin with, but I can
see people may disagree from a simplicity perspective. It also may
affect param2 usage that other mods rely on, although I'm not aware
of any mods that do this.
Allow water to turn cobble slab and stairs to turn into mossy versions.
There is no crafting recipe for mossy stairs and mossy slabs, the
stair/slab API has been modified to allow for a recipeitem that
is `nil`, which will omit adding a crafting recipe for these two
items. The API documentation is updated.
The slabs and stairs will turn mossy when water is adjacent, just like
cobblestone. You can either farm mossy versions by placing them in
water for a while, then collecting them, or run water over your craft.
Mese texture is a classic-mese-yellow version
of celeron55's texture used in MTv0.4.0
Add missing texture credits for mese crystal
and mese crystal fragment
Each sapling is given a single node timer that is between
2 and 4 days of game play time (40-80 minutes). If you walk out
of the zone, and come back later, the tree will always grow
to full if the timer has elapsed.
Because trees.lua is all functions, it needs to be parsed before
nodes.lua, since that references some of its functions. Hence,
change the order of parsing here. Otherwise saplings would not
grow to full.
Adds a minor helper function that allows efficient retrieval of
several inventories from a node inventory. We use this helper to
quickly retrieve the items in chests, vessel shelves, book shelves
and furnaces, and return these with the nodes itself to the TNT caller.
The TNT caller then performs the entity physics, and we don't need
to do anything else.
We disable TNT doing anything with bones.
We expose a bug in the code that drops the items - metadata was lost
entirely. This patch corrects that by properly copying the metadata
and creating the drops list inclusive metadata.
This changes how dirt blocks turn to dirt_with -grass, -dry_grass
or -snow.
Previously, dirt that was sunlit would turn to dirt_with_grass no
matter what, but this happened without any context, so you could
get green patches of dirt_with_grass in the middle of a savannah or
even desert.
Dirt no longer turns to covered dirt unless it's within 1 node from
another dirt_with_grass or dirt_with_dry_grass or dirt_with_snow.
This makes dirt_with_grass "growback" a lot slower, since it now only
happens on the edges, but it retains the context nicely now.
If there is any dirt with a grass or dry grass plant, or snow on top,
and enough light, we'll convert it sporadically to dirt_with_grass
or dirt_with_dry_grass or dirt_with_snow.
This allows us to plant grass of our choice in a large dirt patch,
or in a region where otherwise that type of grass is not present.
This used to be done by 2 abms, but I've combined them in to a single
ABM that is ordered to run with maximum efficiency, solving for the
most common outcome first before attempting more complex checks.
This is technically "dirt with grass" that's just under a snow
cover, so in darkness the grass on these nodes will also die,
turning it into dirt.
This doesn't convert dirt_with_snow under snow.
I've created a modified B3Dexport.py version that automatically strips
the embedded texture link to external texture files. These links were
causing the engine to spew "can't find character.png" messages on the
console, but were harmless due to texture loading being done by the
client side and not through irrlicht.
I previously moved character.png to /textures/, which is wrong. I now
understand that character.png was in the same folder as character.blend
simply to make blender load the texture from the embedded linkage
automatically. Nothing more, nothing less.
Subsequently the character.png file should just sit in convenience
in the /models/ folder with the blend file, and not in the textures
file. This patch moves it back. And yes, minetest does load the
character.png from this path.
The access privilege allows players that have it to bypass protection
on locked doors/trapdoors, chests and bones.
The priv also allows bypassing any minetest.is_protected() check,
including digging nodes and placing them. It is meant for world
moderators to clean up and fix map issues.
Original patch by red-001. Split up and rebased/rewritten by sofar.
This patch requires https://github.com/minetest/minetest/pull/3800
This changes the drawtype of fences to NDT_CONNECTED nodebox drawtype.
These nodes are drawn by the client with the needed connections on
the fly as the scene is drawn. There is no logic needed by mods to
modify the nodes.
These fences connect to (1) other fences, (2) planks and (3) tree
trunks, but nothing else. They do not connect to stone, dirt, wool,
etc. This is done by the "connects_to" parameter, which takes groups
and node names.
Due to the way textures are wrapped, we can make these nodes look a
lot better by giving them a special tile.
This change requires minetest/minetest#3503.
