# textdomain: worldedit_commands ## # Übersetzungshinweise: # node = Block # command = Befehl # region = Gebiet # position 1/2 = Position 1/2 # schematic = Schematic # Der Anwender wird gesiezt. # Diese Datei auf Rechtschreibfehler prüfen (unter Linux): # sed -rne 's|^.*[^@]=(.*)$|\1|gp' worldedit_commands/locale/worldedit_commands.de.tr | sed -re 's/\b(WorldEdit|Schematic|Minetest)\b/Beispiel/g' | LANG=de_DE.UTF-8 hunspell -L ## Outset the selected region.=Ausgewähltes Gebiet vergrößern. Invalid direction: @1=Ungültige Richtung: @1 Invalid number of arguments=Ungültige Anzahl der Argumente Region outset by @1 nodes=Gebiet um @1 Blöcke vergrößert Inset the selected region.=Ausgewähltes Gebiet verkleinern. Region inset by @1 nodes=Gebiet um @1 Blöcke verkleinert Shifts the selection area without moving its contents=Verschiebt das ausgewählte Gebiet ohne dessen Inhalt Invalid if looking straight up or down=Nicht zulässig bei gerade Blickrichtung nach unten oder oben Region shifted by @1 nodes=Gebiet um @1 Blöcke verschoben Expands the selection in the selected absolute or relative axis=Erweitert das Gebiet in Richtung einer absoluten oder relativen Achse Region expanded by @1 nodes=Gebiet um @1 Blöcke erweitert Contracts the selection in the selected absolute or relative axis=Schrumpft das Gebiet in Richtung einer absoluten oder relativen Achse Region contracted by @1 nodes=Gebiet um @1 Blöcke geschrumpft Select a cube with side length around position 1 and run on region=Wähle einen Würfel mit Seitenlänge um Position 1 und führe auf diesem Gebiet aus invalid usage: //@1 cannot be used with cubeapply=Ungültige Verwendung: //@1 kann nicht mit cubeapply verwendet werden Missing privileges: @1=Fehlende Privilegien: @1 Can use WorldEdit commands=Kann WorldEdit-Befehle benutzen no region selected=Kein Gebiet ausgewählt no position 1 selected=Keine Position 1 ausgewählt invalid usage=Ungültige Verwendung Could not open file "@1"=Konnte die Datei „@1“ nicht öffnen Invalid file format!=Ungültiges Dateiformat! Schematic was created with a newer version of WorldEdit.=Schematic wurde mit einer neueren Version von WorldEdit erstellt. Get information about the WorldEdit mod=Informationen über den WorldEdit-Mod erhalten. WorldEdit @1 is available on this server. Type //help to get a list of commands, or get more information at @2=WorldEdit @1 ist auf diesem Server verfügbar. Nutzen Sie //help, um eine Liste der Befehle zu erhalten, oder finden Sie weitere Informationen unter @2 Get help for WorldEdit commands=Hilfe für WorldEdit-Befehle erhalten You are not allowed to use any WorldEdit commands.=Ihnen ist nicht erlaubt WorldEdit-Befehle zu nutzen. Available commands: @1@nUse '//help ' to get more information, or '//help all' to list everything.=Verfügbare Befehle: @1@n„//help “ benutzen, um mehr Informationen zu erhalten, oder „//help all“, um alles aufzulisten. Available commands:@n=Verfügbare Befehle:@n Command not available: =Befehl nicht verfügbar: Enable or disable node inspection=Inspizieren von Blöcken ein- oder ausschalten inspector: inspection enabled for @1, currently facing the @2 axis=Inspektur: für @1 aktiviert, aktuell der @2-Achse zugewandt inspector: inspection disabled=Inspektur: deaktiviert inspector: @1 at @2 (param1@=@3, param2@=@4, received light@=@5) punched facing the @6 axis=Inspektur: @1 bei @2 (param1@=@3, param2@=@4, einfallendes Licht@=@5), der @6-Achse zugewandt, gehauen Reset the region so that it is empty=Gebiet zurücksetzen, sodass es leer ist region reset=Gebiet zurückgesetzt Show markers at the region positions=Markierungen bei den Gebietsposition anzeigen region marked=Gebiet markiert Hide markers if currently shown=Markierungen verstecken falls derzeit sichtbar region unmarked=Gebiet nicht mehr markiert Set WorldEdit region position @1 to the player's location=Position @1 des WorldEdit-Gebiets auf die Position des Spieler setzen position @1 set to @2=Position @1 auf @2 gesetzt Set WorldEdit region, WorldEdit position 1, or WorldEdit position 2 by punching nodes, or display the current WorldEdit region= unknown subcommand: @1=Unbekannter Unterbefehl: @1 select positions by punching two nodes=Wählen Sie die Position durch Hauen zweier Blöcke select position @1 by punching a node=Wählen Sie Position @1 durch Hauen eines Blocks position @1: @2=Position @1: @2 position @1 not set=Position @1 ist nicht gesetzt Set a WorldEdit region position to the position at (, , )=Position des WorldEdit-Gebiets auf (, , ) setzen Display the volume of the current WorldEdit region=Volumen des aktuellen WorldEdit-Gebiets anzeigen current region has a volume of @1 nodes (@2*@3*@4)=Das aktuelle Gebiet hat ein Volumen von @1 Blöcken (@2*@3*@4) Remove all MapBlocks (16x16x16) containing the selected area from the map=Alle Kartenblöcke (16x16x16) entfernen, die das Gebiet enthalten. Area deleted.=Gebiet gelöscht. There was an error during deletion of the area.=Während des Löschens des Gebiets trat ein Fehler aus. Set the current WorldEdit region to =Das aktuelle WorldEdit-Gebiet mit füllen invalid node name: @1=Ungültiger Blockname: @1 @1 nodes set=@1 Blöcke gesetzt Set param2 of all nodes in the current WorldEdit region to =Den param2 aller Blocke im aktuellen WorldEdit-Gebiet auf setzen Param2 is out of range (must be between 0 and 255 inclusive!)=Param2 muss zwischen 0 und 255 (inklusiv) sein @1 nodes altered=@1 Blöcke verändert Fill the current WorldEdit region with a random mix of , ...=Das aktuelle WorldEdit-Gebiet mit einer zufälligen Mischung aus , ... füllen invalid search node name: @1=Ungültiger Blockname für die Suche: @1 invalid replace node name: @1=Ungültiger Blockname für das Ersetzen: @1 Replace all instances of with in the current WorldEdit region=Alle Vorkommen von im aktuellen WorldEdit-Gebiet mit ersetzen @1 nodes replaced=@1 Blöcke ersetzt Replace all nodes other than with in the current WorldEdit region=Alle Blöcke außer im aktuellen WorldEdit-Gebiet mit ersetzen. Add a hollow cube with its ground level centered at WorldEdit position 1 with dimensions x x , composed of .= @1 nodes added=@1 Blöcke hinzugefügt Add a cube with its ground level centered at WorldEdit position 1 with dimensions x x , composed of .= Add hollow sphere centered at WorldEdit position 1 with radius , composed of = Add sphere centered at WorldEdit position 1 with radius , composed of = Add hollow dome centered at WorldEdit position 1 with radius , composed of = Add dome centered at WorldEdit position 1 with radius , composed of = Add hollow cylinder at WorldEdit position 1 along the given axis with length , base radius (and top radius [radius2]), composed of = Add cylinder at WorldEdit position 1 along the given axis with length , base radius (and top radius [radius2]), composed of = Add hollow pyramid centered at WorldEdit position 1 along the given axis with height , composed of = Add pyramid centered at WorldEdit position 1 along the given axis with height , composed of = Add spiral centered at WorldEdit position 1 with side length , height , space between walls , composed of = Copy the current WorldEdit region along the given axis by nodes=Das aktuelle WorldEdit-Gebiet entlang der gegebenen Achse um Blöcke kopieren @1 nodes copied=@1 Blöcke kopiert Move the current WorldEdit region along the given axis by nodes=Das aktuelle WorldEdit-Gebiet entlang der gegebenen Achse um Blöcke verschieben @1 nodes moved=@1 Blöcke verschoben Stack the current WorldEdit region along the given axis times=Das aktuelle WorldEdit-Gebiet entlang der gegebenen Achse -mal stapeln @1 nodes stacked=@1 Blöcke gestapelt Stack the current WorldEdit region times by offset , , =Das aktuelle WorldEdit-Gebiet -mal um , , versetzt stapeln invalid count: @1=Ungültige Anzahl: @1 invalid increments: @1=Ungültige Schrittweite: @1 Scale the current WorldEdit positions and region by a factor of , , along the X, Y, and Z axes, repectively, with position 1 as the origin= invalid scaling factors: @1=Ungültige Skalierungsfaktoren: @1 @1 nodes stretched=@1 Blöcke gestreckt Transpose the current WorldEdit region along the given axes= invalid usage: axes must be different=Ungültige Verwendung: Achsen müssen verschieden sein @1 nodes transposed= Flip the current WorldEdit region along the given axis= @1 nodes flipped= Rotate the current WorldEdit region around the given axis by angle (90 degree increment)= invalid usage: angle must be multiple of 90=Ungültige Verwendung: Winkel muss ein Vielfaches von 90 sein @1 nodes rotated=@1 Blöcke gedreht Rotate oriented nodes in the current WorldEdit region around the Y axis by angle (90 degree increment)= @1 nodes oriented= Fix the lighting in the current WorldEdit region=Belichtung im aktuellen WorldEdit-Gebiet korrigieren @1 nodes updated=@1 Blöcke verändert Remove any fluid node within the current WorldEdit region=Alle flüssigen Blöcke im WorldEdit-Gebiet entfernen Remove any plant, tree or foliage-like nodes in the selected region=Alle Pflanzen, Baum oder Laub-ähnliche Blöcke im WorldEdit-Gebiet entfernen @1 nodes removed=@1 Blöcke entfernt Hide all nodes in the current WorldEdit region non-destructively=Alle Blöcke im WorldEdit-Gebiet zerstörungsfrei verstecken @1 nodes hidden=@1 Blöcke versteckt Suppress all in the current WorldEdit region non-destructively= @1 nodes suppressed= Highlight in the current WorldEdit region by hiding everything else non-destructively=Alle Blöcke im WorldEdit-Gebiet hervorheben, indem alle anderen zerstörungsfrei versteckt werden @1 nodes highlighted=@1 Blöcke hervorgehoben Restores nodes hidden with WorldEdit in the current WorldEdit region=Versteckte Blöcke im WorldEdit-Gebiet wiederherstellen. @1 nodes restored=@1 Blöcke wiederhergestellt Warning: The schematic contains excessive free space and WILL be misaligned when allocated or loaded. To avoid this, shrink your area to cover exactly the nodes to be saved.=Warnung: Das Schematic hat überschüssigen freien Platz und WIRD nach dem Laden falsch ausgerichtet sein. Um dies zu vermeiden, verkleinern Sie das Gebiet sodass es die zu speichernden Blöcke exakt umfasst. Save the current WorldEdit region to "(world folder)/schems/.we"=Das aktuelle WorldEdit-Gebiet in "(Weltordner)/schems/.we" speichern Disallowed file name: @1=Nicht erlaubter Dateiname: @1 Could not save file to "@1"=Konnte die Datei nicht unter "@1" speichern @1 nodes saved=@1 Blöcke gespeichert Set the region defined by nodes from "(world folder)/schems/.we" as the current WorldEdit region=Das aktuelle WorldEdit-Gebiet anhand der Blöcke in "(Weltordner)/schems/.we" setzen Schematic empty, nothing allocated=Schematic leer, nichts reserviert @1 nodes allocated=@1 Blöcke reserviert Load nodes from "(world folder)/schems/[.we[m]]" with position 1 of the current WorldEdit region as the origin=Blöcke aus "(Weltordner)/schems/[.we[m]]" mit Position 1 als Ausgangspunkt laden Loading failed!=Laden fehlgeschlagen! @1 nodes loaded=@1 Blöcke geladen Executes as a Lua chunk in the global namespace= Executes as a Lua chunk in the global namespace with the variable pos available, for each node in the current WorldEdit region= Save the current WorldEdit region using the Minetest Schematic format to "(world folder)/schems/.mts"=Das aktuelle WorldEdit-Gebiet als Minetest-Schematic in "(Weltordner)/schems/.mts" speichern Failed to create Minetest schematic=Konnte Minetest-Schematic nicht erstellen Saved Minetest schematic to @1=Minetest-Schematic in @1 gespeichert Load nodes from "(world folder)/schems/.mts" with position 1 of the current WorldEdit region as the origin=Blöcke aus "(Weltordner)/schems/.mts" mit Position 1 als Ausgangspunkt laden failed to place Minetest schematic=Konnte Minetest-Schematic nicht platzieren placed Minetest schematic @1 at @2=Minetest-Schematic @1 bei @2 platziert Begins node probability entry for Minetest schematics, gets the nodes that have probabilities set, or ends node probability entry= select Minetest schematic probability values by punching nodes= finished Minetest schematic probability selection= currently set node probabilities:= invalid node probability given, not saved= Clears all objects within the WorldEdit region=Löscht alle Objekte innerhalb des WorldEdit-Gebiets @1 objects cleared=@1 Objekte gelöscht WARNING: this operation could affect up to @1 nodes; type //y to continue or //n to cancel=WARNUNG: Dieser Vorgang könnte bis zu @1 Blöcke betreffen; //y zum Fortfahren oder //n zum Abbrechen Confirm a pending operation=Einen ausstehenden Vorgang bestätigen no operation pending=Kein Vorgang ausstehend Abort a pending operation=Einen ausstehenden Vorgang abbrechen WorldEdit Wand tool@nLeft-click to set 1st position, right-click to set 2nd=WorldEdit Zauberstab@nSetzen der 1. Position mit Linksklick, der 2. mit Rechtsklick