dfcaverns/df_trees/torchspine.lua

352 lines
12 KiB
Lua
Raw Normal View History

local S = minetest.get_translator(minetest.get_current_modname())
local torchspine_min_delay = df_trees.config.blood_thorn_delay_multiplier*df_trees.config.tree_min_growth_delay
local torchspine_max_delay = df_trees.config.blood_thorn_delay_multiplier*df_trees.config.tree_max_growth_delay
-- Rather than make this whole mod depend on subterrane just for this, I copied and pasted a chunk of stalactite code.
local x_disp = 0.125
local z_disp = 0.125
local stal_on_place = function(itemstack, placer, pointed_thing)
local pt = pointed_thing
-- check if pointing at a node
if not pt then
return itemstack
end
if pt.type ~= "node" then
return itemstack
end
local under = minetest.get_node(pt.under)
local above = minetest.get_node(pt.above)
if minetest.is_protected(pt.above, placer:get_player_name()) then
minetest.record_protection_violation(pt.above, placer:get_player_name())
return
end
-- return if any of the nodes is not registered
if not minetest.registered_nodes[under.name] or not minetest.registered_nodes[above.name] then
return itemstack
end
-- check if you can replace the node above the pointed node
if not minetest.registered_nodes[above.name].buildable_to then
return itemstack
end
local new_param2
-- check if pointing at an existing stalactite
if minetest.get_item_group(under.name, "subterrane_stal_align") ~= 0 then
new_param2 = under.param2
else
new_param2 = math.random(0,3)
end
-- add the node and remove 1 item from the itemstack
minetest.add_node(pt.above, {name = itemstack:get_name(), param2 = new_param2})
Primordial cavern layer (#12) * bring in the art assets from ClockGen's "better_caves_modpack" under CC BY 4.0,, code written from scratch. * update mapgen_helper * import ClockGen's giant mushroom schematics, make them and giant ferns growable * add giant jungle mushroom, rough out actual cavern layer code framework * fungal ceiling decorations * decorate fungal floor a bit * update mapgen_helper * update primordial mushroom schematic placement to ensure it fits * add giant mycelium fungoidal structure * add giant mycelium to mapgen * fix settings for giant mycelium * make mycelium grow when players aren't present * allow mycelium growth to pause when it hits unloaded areas * add a use for giant mycelium * make giant mushrooms edible, make jungle trees growable * rough out the jungle biome * Make a spectrum of jungle growth * optimize pngs, add is_ground_content to everything * use custom is_ground_content method * fix a crash with veinstone, and simplify nvals_cave lookup now that overgen covers the same area * more fixes for overgen support * remove unintentional airspace from underside of slade * fix for overgen crash in level 2 * primordial column material, add sealed shafts to underworld * add seal block * Set up puzzle seals to be able to dig a staircase shaft through the slade layer. TODO: the puzzle to guard the trigger. * puzzle seals now fully functional. Need to add clues for decoding the keys next. * add a small bit of anti-griefing - the seal breach bell only tolls globally 13 times per activation * add flowers to the underworld warrior bones * switch to a different key bell * fancy up the puzzle seal temples with some custom blocks, add sub-slade grid passages * add a clue to the seal formspec * tweak background of inscription 2 so it's less obviously a copy of the background for inscription 1 * switch to compositing to save a few bytes * fancy up the seal's upper surface with inscriptions to make the formspec feel consistent * puzzle particle, bones were only spawning on top of structures * fix ice/oil on level 3, tweak some loot probabilities * add trail mod support * remove deprecated files * boost default plant growth delay, add growing selection boxes * update map colours * add named waypoints to the underworld * try a more efficient way of changing the interiors of columns * polishing up the Primordial layer * update guide with some Primordial teasers * updated magma sea screenshot * update mapgen_helper and subterrane * reduce density of megaflora a bit - was too hard to walk through * spreading_dirt_type depends on light, create my own ABM instead * add names to the glowing pits and some of the ruins * separate setting for ruin markers * record identity of slade-breachers * make mycelia climbable * update subterrane * change surface tunnel detection to allow above-ground stalactites and stalagmites * add rare thicker Goblin Caps, suitable for use as huts. * better goblin cap schematics * update colours * make it slightly harder to dig down through amethyst sheathing of pits * fixing up fungus light sensitivity, tree growth code * fix a few minor bugs * update deprecated functions * add various eating sounds * make mapping kit requirement more flexible * update spindlestem growth code, remove deprecated functions * fix leftover undefined variable * add fireflies to primordial, spread out the post-mapgen node timer for plant matter a bit more. * fix bones formspec * add lbm to upgrade old bones * fix slade undiggability * make torchspines smokey and manually lightable * fix drop definitions * generate dry stalactites in near-surface caverns. * caverns become far too smokey, alas * add pitter patter of spore tree spores, alternate paper recipe * new mapgen_helper metrics * add smokey back to torchspine now that it can be dialed down a bit * replace glowstone texture with a new animated one * switch from ABM to node timer for mapgen mycelium growth * make mapgen mycelium timer delay configurable * improve the efficiency of giant mycelium growth using flat node array, fewer dereferences * remove the smoke from torchspines again - it doesn't dissipate that deep underground * give slade a more muted, gloomy hue to differentiate it from nether stone * update screenshots with new slade colors * update mapgen_helper
2020-02-13 07:49:17 +01:00
if not minetest.settings:get_bool("creative_mode", false) then
itemstack:take_item()
end
return itemstack
end
local stal_box_1 = {{-0.0625+x_disp, -0.5, -0.0625+z_disp, 0.0625+x_disp, 0.5, 0.0625+z_disp}}
local stal_box_2 = {{-0.125+x_disp, -0.5, -0.125+z_disp, 0.125+x_disp, 0.5, 0.125+z_disp}}
local stal_box_3 = {{-0.25+x_disp, -0.5, -0.25+z_disp, 0.25+x_disp, 0.5, 0.25+z_disp}}
local stal_box_4 = {{-0.375+x_disp, -0.5, -0.375+z_disp, 0.375+x_disp, 0.5, 0.375+z_disp}}
local torchspine_list = {"df_trees:torchspine_1","df_trees:torchspine_2","df_trees:torchspine_3","df_trees:torchspine_4"}
local grow_torchspine = function(pos)
local param2 = minetest.get_node(pos).param2
if param2 > 3 then
return -- tipped over, don't grow
end
local node_above = minetest.get_node({x=pos.x, y=pos.y+1, z=pos.z})
local node_above_def = minetest.registered_nodes[node_above.name]
if not node_above_def.buildable_to then
-- don't grow, but do continue cycling the torch state
minetest.swap_node(pos, {name = "df_trees:torchspine_1", param2 = node.param2})
minetest.get_node_timer(pos):start(math.random(torchspine_min_delay, torchspine_max_delay))
return
end
local pos_base = vector.new(pos)
local height = 1
for i = 1,3 do
pos_base.y = pos_base.y-1
if minetest.get_item_group(minetest.get_node(pos_base).name, "df_trees_torchspine") > 0 then
height = height + 1
else
break
end
end
if height >= 4 then
-- don't grow, but do continue cycling the torch state
minetest.swap_node(pos, {name = "df_trees:torchspine_1", param2 = node.param2})
minetest.get_node_timer(pos):start(math.random(torchspine_min_delay, torchspine_max_delay))
return
end
-- place a taller torchspine
pos.y = pos.y + 1
minetest.get_node_timer(pos):start(math.random(torchspine_min_delay, torchspine_max_delay))
for i = 1, height+1 do
minetest.swap_node(pos, {name=torchspine_list[i], param2=param2})
pos.y = pos.y - 1
end
end
local torch_node = df_trees.node_names.torch
minetest.register_node("df_trees:torchspine_1", {
description = S("Torchspine Tip"),
_doc_items_longdesc = df_trees.doc.torchspine_desc,
_doc_items_usagehelp = df_trees.doc.torchspine_usage,
tiles = {"dfcaverns_torchspine_0.5.png", "dfcaverns_torchspine_1.5.png", "dfcaverns_torchspine_1.png"},
groups = {oddly_breakable_by_hand = 1, subterrane_stal_align = 1, flow_through = 1, fall_damage_add_percent = 100, df_trees_torchspine = 1},
drawtype = "nodebox",
paramtype = "light",
paramtype2 = "facedir",
Primordial cavern layer (#12) * bring in the art assets from ClockGen's "better_caves_modpack" under CC BY 4.0,, code written from scratch. * update mapgen_helper * import ClockGen's giant mushroom schematics, make them and giant ferns growable * add giant jungle mushroom, rough out actual cavern layer code framework * fungal ceiling decorations * decorate fungal floor a bit * update mapgen_helper * update primordial mushroom schematic placement to ensure it fits * add giant mycelium fungoidal structure * add giant mycelium to mapgen * fix settings for giant mycelium * make mycelium grow when players aren't present * allow mycelium growth to pause when it hits unloaded areas * add a use for giant mycelium * make giant mushrooms edible, make jungle trees growable * rough out the jungle biome * Make a spectrum of jungle growth * optimize pngs, add is_ground_content to everything * use custom is_ground_content method * fix a crash with veinstone, and simplify nvals_cave lookup now that overgen covers the same area * more fixes for overgen support * remove unintentional airspace from underside of slade * fix for overgen crash in level 2 * primordial column material, add sealed shafts to underworld * add seal block * Set up puzzle seals to be able to dig a staircase shaft through the slade layer. TODO: the puzzle to guard the trigger. * puzzle seals now fully functional. Need to add clues for decoding the keys next. * add a small bit of anti-griefing - the seal breach bell only tolls globally 13 times per activation * add flowers to the underworld warrior bones * switch to a different key bell * fancy up the puzzle seal temples with some custom blocks, add sub-slade grid passages * add a clue to the seal formspec * tweak background of inscription 2 so it's less obviously a copy of the background for inscription 1 * switch to compositing to save a few bytes * fancy up the seal's upper surface with inscriptions to make the formspec feel consistent * puzzle particle, bones were only spawning on top of structures * fix ice/oil on level 3, tweak some loot probabilities * add trail mod support * remove deprecated files * boost default plant growth delay, add growing selection boxes * update map colours * add named waypoints to the underworld * try a more efficient way of changing the interiors of columns * polishing up the Primordial layer * update guide with some Primordial teasers * updated magma sea screenshot * update mapgen_helper and subterrane * reduce density of megaflora a bit - was too hard to walk through * spreading_dirt_type depends on light, create my own ABM instead * add names to the glowing pits and some of the ruins * separate setting for ruin markers * record identity of slade-breachers * make mycelia climbable * update subterrane * change surface tunnel detection to allow above-ground stalactites and stalagmites * add rare thicker Goblin Caps, suitable for use as huts. * better goblin cap schematics * update colours * make it slightly harder to dig down through amethyst sheathing of pits * fixing up fungus light sensitivity, tree growth code * fix a few minor bugs * update deprecated functions * add various eating sounds * make mapping kit requirement more flexible * update spindlestem growth code, remove deprecated functions * fix leftover undefined variable * add fireflies to primordial, spread out the post-mapgen node timer for plant matter a bit more. * fix bones formspec * add lbm to upgrade old bones * fix slade undiggability * make torchspines smokey and manually lightable * fix drop definitions * generate dry stalactites in near-surface caverns. * caverns become far too smokey, alas * add pitter patter of spore tree spores, alternate paper recipe * new mapgen_helper metrics * add smokey back to torchspine now that it can be dialed down a bit * replace glowstone texture with a new animated one * switch from ABM to node timer for mapgen mycelium growth * make mapgen mycelium timer delay configurable * improve the efficiency of giant mycelium growth using flat node array, fewer dereferences * remove the smoke from torchspines again - it doesn't dissipate that deep underground * give slade a more muted, gloomy hue to differentiate it from nether stone * update screenshots with new slade colors * update mapgen_helper
2020-02-13 07:49:17 +01:00
is_ground_content = false,
drop = torch_node,
node_box = {
type = "fixed",
fixed = stal_box_1,
},
on_place = stal_on_place,
Primordial cavern layer (#12) * bring in the art assets from ClockGen's "better_caves_modpack" under CC BY 4.0,, code written from scratch. * update mapgen_helper * import ClockGen's giant mushroom schematics, make them and giant ferns growable * add giant jungle mushroom, rough out actual cavern layer code framework * fungal ceiling decorations * decorate fungal floor a bit * update mapgen_helper * update primordial mushroom schematic placement to ensure it fits * add giant mycelium fungoidal structure * add giant mycelium to mapgen * fix settings for giant mycelium * make mycelium grow when players aren't present * allow mycelium growth to pause when it hits unloaded areas * add a use for giant mycelium * make giant mushrooms edible, make jungle trees growable * rough out the jungle biome * Make a spectrum of jungle growth * optimize pngs, add is_ground_content to everything * use custom is_ground_content method * fix a crash with veinstone, and simplify nvals_cave lookup now that overgen covers the same area * more fixes for overgen support * remove unintentional airspace from underside of slade * fix for overgen crash in level 2 * primordial column material, add sealed shafts to underworld * add seal block * Set up puzzle seals to be able to dig a staircase shaft through the slade layer. TODO: the puzzle to guard the trigger. * puzzle seals now fully functional. Need to add clues for decoding the keys next. * add a small bit of anti-griefing - the seal breach bell only tolls globally 13 times per activation * add flowers to the underworld warrior bones * switch to a different key bell * fancy up the puzzle seal temples with some custom blocks, add sub-slade grid passages * add a clue to the seal formspec * tweak background of inscription 2 so it's less obviously a copy of the background for inscription 1 * switch to compositing to save a few bytes * fancy up the seal's upper surface with inscriptions to make the formspec feel consistent * puzzle particle, bones were only spawning on top of structures * fix ice/oil on level 3, tweak some loot probabilities * add trail mod support * remove deprecated files * boost default plant growth delay, add growing selection boxes * update map colours * add named waypoints to the underworld * try a more efficient way of changing the interiors of columns * polishing up the Primordial layer * update guide with some Primordial teasers * updated magma sea screenshot * update mapgen_helper and subterrane * reduce density of megaflora a bit - was too hard to walk through * spreading_dirt_type depends on light, create my own ABM instead * add names to the glowing pits and some of the ruins * separate setting for ruin markers * record identity of slade-breachers * make mycelia climbable * update subterrane * change surface tunnel detection to allow above-ground stalactites and stalagmites * add rare thicker Goblin Caps, suitable for use as huts. * better goblin cap schematics * update colours * make it slightly harder to dig down through amethyst sheathing of pits * fixing up fungus light sensitivity, tree growth code * fix a few minor bugs * update deprecated functions * add various eating sounds * make mapping kit requirement more flexible * update spindlestem growth code, remove deprecated functions * fix leftover undefined variable * add fireflies to primordial, spread out the post-mapgen node timer for plant matter a bit more. * fix bones formspec * add lbm to upgrade old bones * fix slade undiggability * make torchspines smokey and manually lightable * fix drop definitions * generate dry stalactites in near-surface caverns. * caverns become far too smokey, alas * add pitter patter of spore tree spores, alternate paper recipe * new mapgen_helper metrics * add smokey back to torchspine now that it can be dialed down a bit * replace glowstone texture with a new animated one * switch from ABM to node timer for mapgen mycelium growth * make mapgen mycelium timer delay configurable * improve the efficiency of giant mycelium growth using flat node array, fewer dereferences * remove the smoke from torchspines again - it doesn't dissipate that deep underground * give slade a more muted, gloomy hue to differentiate it from nether stone * update screenshots with new slade colors * update mapgen_helper
2020-02-13 07:49:17 +01:00
on_punch = function(pos, node, puncher)
if puncher:get_wielded_item():get_name() == torch_node then
Primordial cavern layer (#12) * bring in the art assets from ClockGen's "better_caves_modpack" under CC BY 4.0,, code written from scratch. * update mapgen_helper * import ClockGen's giant mushroom schematics, make them and giant ferns growable * add giant jungle mushroom, rough out actual cavern layer code framework * fungal ceiling decorations * decorate fungal floor a bit * update mapgen_helper * update primordial mushroom schematic placement to ensure it fits * add giant mycelium fungoidal structure * add giant mycelium to mapgen * fix settings for giant mycelium * make mycelium grow when players aren't present * allow mycelium growth to pause when it hits unloaded areas * add a use for giant mycelium * make giant mushrooms edible, make jungle trees growable * rough out the jungle biome * Make a spectrum of jungle growth * optimize pngs, add is_ground_content to everything * use custom is_ground_content method * fix a crash with veinstone, and simplify nvals_cave lookup now that overgen covers the same area * more fixes for overgen support * remove unintentional airspace from underside of slade * fix for overgen crash in level 2 * primordial column material, add sealed shafts to underworld * add seal block * Set up puzzle seals to be able to dig a staircase shaft through the slade layer. TODO: the puzzle to guard the trigger. * puzzle seals now fully functional. Need to add clues for decoding the keys next. * add a small bit of anti-griefing - the seal breach bell only tolls globally 13 times per activation * add flowers to the underworld warrior bones * switch to a different key bell * fancy up the puzzle seal temples with some custom blocks, add sub-slade grid passages * add a clue to the seal formspec * tweak background of inscription 2 so it's less obviously a copy of the background for inscription 1 * switch to compositing to save a few bytes * fancy up the seal's upper surface with inscriptions to make the formspec feel consistent * puzzle particle, bones were only spawning on top of structures * fix ice/oil on level 3, tweak some loot probabilities * add trail mod support * remove deprecated files * boost default plant growth delay, add growing selection boxes * update map colours * add named waypoints to the underworld * try a more efficient way of changing the interiors of columns * polishing up the Primordial layer * update guide with some Primordial teasers * updated magma sea screenshot * update mapgen_helper and subterrane * reduce density of megaflora a bit - was too hard to walk through * spreading_dirt_type depends on light, create my own ABM instead * add names to the glowing pits and some of the ruins * separate setting for ruin markers * record identity of slade-breachers * make mycelia climbable * update subterrane * change surface tunnel detection to allow above-ground stalactites and stalagmites * add rare thicker Goblin Caps, suitable for use as huts. * better goblin cap schematics * update colours * make it slightly harder to dig down through amethyst sheathing of pits * fixing up fungus light sensitivity, tree growth code * fix a few minor bugs * update deprecated functions * add various eating sounds * make mapping kit requirement more flexible * update spindlestem growth code, remove deprecated functions * fix leftover undefined variable * add fireflies to primordial, spread out the post-mapgen node timer for plant matter a bit more. * fix bones formspec * add lbm to upgrade old bones * fix slade undiggability * make torchspines smokey and manually lightable * fix drop definitions * generate dry stalactites in near-surface caverns. * caverns become far too smokey, alas * add pitter patter of spore tree spores, alternate paper recipe * new mapgen_helper metrics * add smokey back to torchspine now that it can be dialed down a bit * replace glowstone texture with a new animated one * switch from ABM to node timer for mapgen mycelium growth * make mapgen mycelium timer delay configurable * improve the efficiency of giant mycelium growth using flat node array, fewer dereferences * remove the smoke from torchspines again - it doesn't dissipate that deep underground * give slade a more muted, gloomy hue to differentiate it from nether stone * update screenshots with new slade colors * update mapgen_helper
2020-02-13 07:49:17 +01:00
minetest.swap_node(pos, {name = "df_trees:torchspine_1_lit", param2 = node.param2})
end
end,
on_timer = function(pos)
local above_def = minetest.registered_nodes[minetest.get_node({x=pos.x, y=pos.y+1, z=pos.z}).name]
if above_def and above_def.buildable_to then
minetest.swap_node(pos, {name="df_trees:torchspine_1_lit", param2=minetest.get_node(pos).param2})
end
minetest.get_node_timer(pos):start(math.random(torchspine_min_delay, torchspine_max_delay))
end,
on_destruct = function(pos)
minetest.get_node_timer(pos):stop()
end,
})
minetest.register_node("df_trees:torchspine_1_lit", {
description = S("Torchspine Tip"),
_doc_items_longdesc = df_trees.doc.torchspine_desc,
_doc_items_usagehelp = df_trees.doc.torchspine_usage,
tiles = {df_trees.textures.gold_block, "dfcaverns_torchspine_1.5.png", "dfcaverns_torchspine_1_lit.png"},
groups = {oddly_breakable_by_hand = 1, subterrane_stal_align = 1, flow_through = 1, torch = 1, fall_damage_add_percent = 150, smokey = 4, df_trees_torchspine = 1},
drawtype = "nodebox",
paramtype = "light",
paramtype2 = "facedir",
Primordial cavern layer (#12) * bring in the art assets from ClockGen's "better_caves_modpack" under CC BY 4.0,, code written from scratch. * update mapgen_helper * import ClockGen's giant mushroom schematics, make them and giant ferns growable * add giant jungle mushroom, rough out actual cavern layer code framework * fungal ceiling decorations * decorate fungal floor a bit * update mapgen_helper * update primordial mushroom schematic placement to ensure it fits * add giant mycelium fungoidal structure * add giant mycelium to mapgen * fix settings for giant mycelium * make mycelium grow when players aren't present * allow mycelium growth to pause when it hits unloaded areas * add a use for giant mycelium * make giant mushrooms edible, make jungle trees growable * rough out the jungle biome * Make a spectrum of jungle growth * optimize pngs, add is_ground_content to everything * use custom is_ground_content method * fix a crash with veinstone, and simplify nvals_cave lookup now that overgen covers the same area * more fixes for overgen support * remove unintentional airspace from underside of slade * fix for overgen crash in level 2 * primordial column material, add sealed shafts to underworld * add seal block * Set up puzzle seals to be able to dig a staircase shaft through the slade layer. TODO: the puzzle to guard the trigger. * puzzle seals now fully functional. Need to add clues for decoding the keys next. * add a small bit of anti-griefing - the seal breach bell only tolls globally 13 times per activation * add flowers to the underworld warrior bones * switch to a different key bell * fancy up the puzzle seal temples with some custom blocks, add sub-slade grid passages * add a clue to the seal formspec * tweak background of inscription 2 so it's less obviously a copy of the background for inscription 1 * switch to compositing to save a few bytes * fancy up the seal's upper surface with inscriptions to make the formspec feel consistent * puzzle particle, bones were only spawning on top of structures * fix ice/oil on level 3, tweak some loot probabilities * add trail mod support * remove deprecated files * boost default plant growth delay, add growing selection boxes * update map colours * add named waypoints to the underworld * try a more efficient way of changing the interiors of columns * polishing up the Primordial layer * update guide with some Primordial teasers * updated magma sea screenshot * update mapgen_helper and subterrane * reduce density of megaflora a bit - was too hard to walk through * spreading_dirt_type depends on light, create my own ABM instead * add names to the glowing pits and some of the ruins * separate setting for ruin markers * record identity of slade-breachers * make mycelia climbable * update subterrane * change surface tunnel detection to allow above-ground stalactites and stalagmites * add rare thicker Goblin Caps, suitable for use as huts. * better goblin cap schematics * update colours * make it slightly harder to dig down through amethyst sheathing of pits * fixing up fungus light sensitivity, tree growth code * fix a few minor bugs * update deprecated functions * add various eating sounds * make mapping kit requirement more flexible * update spindlestem growth code, remove deprecated functions * fix leftover undefined variable * add fireflies to primordial, spread out the post-mapgen node timer for plant matter a bit more. * fix bones formspec * add lbm to upgrade old bones * fix slade undiggability * make torchspines smokey and manually lightable * fix drop definitions * generate dry stalactites in near-surface caverns. * caverns become far too smokey, alas * add pitter patter of spore tree spores, alternate paper recipe * new mapgen_helper metrics * add smokey back to torchspine now that it can be dialed down a bit * replace glowstone texture with a new animated one * switch from ABM to node timer for mapgen mycelium growth * make mapgen mycelium timer delay configurable * improve the efficiency of giant mycelium growth using flat node array, fewer dereferences * remove the smoke from torchspines again - it doesn't dissipate that deep underground * give slade a more muted, gloomy hue to differentiate it from nether stone * update screenshots with new slade colors * update mapgen_helper
2020-02-13 07:49:17 +01:00
light_source = 8,
is_ground_content = false,
drop = torch_node .. " 2",
node_box = {
type = "fixed",
fixed = stal_box_1,
},
on_place = stal_on_place,
on_timer = function(pos)
grow_torchspine(pos)
end,
on_destruct = function(pos)
minetest.get_node_timer(pos):stop()
end,
})
minetest.register_node("df_trees:torchspine_2", {
description = S("Torchspine"),
_doc_items_longdesc = df_trees.doc.torchspine_desc,
_doc_items_usagehelp = df_trees.doc.torchspine_usage,
tiles = {"dfcaverns_torchspine_1.5.png", "dfcaverns_torchspine_2.5.png", "dfcaverns_torchspine_2.png"},
groups = {oddly_breakable_by_hand = 1, subterrane_stal_align = 1, flow_through = 1, fall_damage_add_percent = 50, df_trees_torchspine = 1},
drawtype = "nodebox",
paramtype = "light",
paramtype2 = "facedir",
Primordial cavern layer (#12) * bring in the art assets from ClockGen's "better_caves_modpack" under CC BY 4.0,, code written from scratch. * update mapgen_helper * import ClockGen's giant mushroom schematics, make them and giant ferns growable * add giant jungle mushroom, rough out actual cavern layer code framework * fungal ceiling decorations * decorate fungal floor a bit * update mapgen_helper * update primordial mushroom schematic placement to ensure it fits * add giant mycelium fungoidal structure * add giant mycelium to mapgen * fix settings for giant mycelium * make mycelium grow when players aren't present * allow mycelium growth to pause when it hits unloaded areas * add a use for giant mycelium * make giant mushrooms edible, make jungle trees growable * rough out the jungle biome * Make a spectrum of jungle growth * optimize pngs, add is_ground_content to everything * use custom is_ground_content method * fix a crash with veinstone, and simplify nvals_cave lookup now that overgen covers the same area * more fixes for overgen support * remove unintentional airspace from underside of slade * fix for overgen crash in level 2 * primordial column material, add sealed shafts to underworld * add seal block * Set up puzzle seals to be able to dig a staircase shaft through the slade layer. TODO: the puzzle to guard the trigger. * puzzle seals now fully functional. Need to add clues for decoding the keys next. * add a small bit of anti-griefing - the seal breach bell only tolls globally 13 times per activation * add flowers to the underworld warrior bones * switch to a different key bell * fancy up the puzzle seal temples with some custom blocks, add sub-slade grid passages * add a clue to the seal formspec * tweak background of inscription 2 so it's less obviously a copy of the background for inscription 1 * switch to compositing to save a few bytes * fancy up the seal's upper surface with inscriptions to make the formspec feel consistent * puzzle particle, bones were only spawning on top of structures * fix ice/oil on level 3, tweak some loot probabilities * add trail mod support * remove deprecated files * boost default plant growth delay, add growing selection boxes * update map colours * add named waypoints to the underworld * try a more efficient way of changing the interiors of columns * polishing up the Primordial layer * update guide with some Primordial teasers * updated magma sea screenshot * update mapgen_helper and subterrane * reduce density of megaflora a bit - was too hard to walk through * spreading_dirt_type depends on light, create my own ABM instead * add names to the glowing pits and some of the ruins * separate setting for ruin markers * record identity of slade-breachers * make mycelia climbable * update subterrane * change surface tunnel detection to allow above-ground stalactites and stalagmites * add rare thicker Goblin Caps, suitable for use as huts. * better goblin cap schematics * update colours * make it slightly harder to dig down through amethyst sheathing of pits * fixing up fungus light sensitivity, tree growth code * fix a few minor bugs * update deprecated functions * add various eating sounds * make mapping kit requirement more flexible * update spindlestem growth code, remove deprecated functions * fix leftover undefined variable * add fireflies to primordial, spread out the post-mapgen node timer for plant matter a bit more. * fix bones formspec * add lbm to upgrade old bones * fix slade undiggability * make torchspines smokey and manually lightable * fix drop definitions * generate dry stalactites in near-surface caverns. * caverns become far too smokey, alas * add pitter patter of spore tree spores, alternate paper recipe * new mapgen_helper metrics * add smokey back to torchspine now that it can be dialed down a bit * replace glowstone texture with a new animated one * switch from ABM to node timer for mapgen mycelium growth * make mapgen mycelium timer delay configurable * improve the efficiency of giant mycelium growth using flat node array, fewer dereferences * remove the smoke from torchspines again - it doesn't dissipate that deep underground * give slade a more muted, gloomy hue to differentiate it from nether stone * update screenshots with new slade colors * update mapgen_helper
2020-02-13 07:49:17 +01:00
is_ground_content = false,
node_box = {
type = "fixed",
fixed = stal_box_2,
},
drop = {
max_items = 1,
items = {
{
items = {"df_trees:torchspine_ember"}, -- Items to drop
rarity = 2, -- Probability of dropping is 1 / rarity
},
},
},
on_place = stal_on_place,
})
minetest.register_node("df_trees:torchspine_3", {
description = S("Torchspine"),
_doc_items_longdesc = df_trees.doc.torchspine_desc,
_doc_items_usagehelp = df_trees.doc.torchspine_usage,
tiles = {"dfcaverns_torchspine_2.5.png", "dfcaverns_torchspine_3.5.png", "dfcaverns_torchspine_3.png"},
groups = {oddly_breakable_by_hand = 1, subterrane_stal_align = 1, flow_through = 1, df_trees_torchspine = 1},
drawtype = "nodebox",
paramtype = "light",
paramtype2 = "facedir",
Primordial cavern layer (#12) * bring in the art assets from ClockGen's "better_caves_modpack" under CC BY 4.0,, code written from scratch. * update mapgen_helper * import ClockGen's giant mushroom schematics, make them and giant ferns growable * add giant jungle mushroom, rough out actual cavern layer code framework * fungal ceiling decorations * decorate fungal floor a bit * update mapgen_helper * update primordial mushroom schematic placement to ensure it fits * add giant mycelium fungoidal structure * add giant mycelium to mapgen * fix settings for giant mycelium * make mycelium grow when players aren't present * allow mycelium growth to pause when it hits unloaded areas * add a use for giant mycelium * make giant mushrooms edible, make jungle trees growable * rough out the jungle biome * Make a spectrum of jungle growth * optimize pngs, add is_ground_content to everything * use custom is_ground_content method * fix a crash with veinstone, and simplify nvals_cave lookup now that overgen covers the same area * more fixes for overgen support * remove unintentional airspace from underside of slade * fix for overgen crash in level 2 * primordial column material, add sealed shafts to underworld * add seal block * Set up puzzle seals to be able to dig a staircase shaft through the slade layer. TODO: the puzzle to guard the trigger. * puzzle seals now fully functional. Need to add clues for decoding the keys next. * add a small bit of anti-griefing - the seal breach bell only tolls globally 13 times per activation * add flowers to the underworld warrior bones * switch to a different key bell * fancy up the puzzle seal temples with some custom blocks, add sub-slade grid passages * add a clue to the seal formspec * tweak background of inscription 2 so it's less obviously a copy of the background for inscription 1 * switch to compositing to save a few bytes * fancy up the seal's upper surface with inscriptions to make the formspec feel consistent * puzzle particle, bones were only spawning on top of structures * fix ice/oil on level 3, tweak some loot probabilities * add trail mod support * remove deprecated files * boost default plant growth delay, add growing selection boxes * update map colours * add named waypoints to the underworld * try a more efficient way of changing the interiors of columns * polishing up the Primordial layer * update guide with some Primordial teasers * updated magma sea screenshot * update mapgen_helper and subterrane * reduce density of megaflora a bit - was too hard to walk through * spreading_dirt_type depends on light, create my own ABM instead * add names to the glowing pits and some of the ruins * separate setting for ruin markers * record identity of slade-breachers * make mycelia climbable * update subterrane * change surface tunnel detection to allow above-ground stalactites and stalagmites * add rare thicker Goblin Caps, suitable for use as huts. * better goblin cap schematics * update colours * make it slightly harder to dig down through amethyst sheathing of pits * fixing up fungus light sensitivity, tree growth code * fix a few minor bugs * update deprecated functions * add various eating sounds * make mapping kit requirement more flexible * update spindlestem growth code, remove deprecated functions * fix leftover undefined variable * add fireflies to primordial, spread out the post-mapgen node timer for plant matter a bit more. * fix bones formspec * add lbm to upgrade old bones * fix slade undiggability * make torchspines smokey and manually lightable * fix drop definitions * generate dry stalactites in near-surface caverns. * caverns become far too smokey, alas * add pitter patter of spore tree spores, alternate paper recipe * new mapgen_helper metrics * add smokey back to torchspine now that it can be dialed down a bit * replace glowstone texture with a new animated one * switch from ABM to node timer for mapgen mycelium growth * make mapgen mycelium timer delay configurable * improve the efficiency of giant mycelium growth using flat node array, fewer dereferences * remove the smoke from torchspines again - it doesn't dissipate that deep underground * give slade a more muted, gloomy hue to differentiate it from nether stone * update screenshots with new slade colors * update mapgen_helper
2020-02-13 07:49:17 +01:00
is_ground_content = false,
node_box = {
type = "fixed",
fixed = stal_box_3,
},
drop = {
max_items = 1,
items = {
{
items = {"df_trees:torchspine_ember"}, -- Items to drop
rarity = 2, -- Probability of dropping is 1 / rarity
},
{
items = {"df_trees:torchspine_ember 2"}, -- Items to drop
rarity = 2, -- Probability of dropping is 1 / rarity
},
},
},
on_place = stal_on_place,
})
minetest.register_node("df_trees:torchspine_4", {
description = S("Torchspine"),
_doc_items_longdesc = df_trees.doc.torchspine_desc,
_doc_items_usagehelp = df_trees.doc.torchspine_usage,
tiles = {"dfcaverns_torchspine_3.5.png", "dfcaverns_torchspine_4.5.png", "dfcaverns_torchspine_4.png"},
groups = {oddly_breakable_by_hand = 1, subterrane_stal_align = 1, flow_through = 1, df_trees_torchspine = 1},
drawtype = "nodebox",
paramtype = "light",
paramtype2 = "facedir",
Primordial cavern layer (#12) * bring in the art assets from ClockGen's "better_caves_modpack" under CC BY 4.0,, code written from scratch. * update mapgen_helper * import ClockGen's giant mushroom schematics, make them and giant ferns growable * add giant jungle mushroom, rough out actual cavern layer code framework * fungal ceiling decorations * decorate fungal floor a bit * update mapgen_helper * update primordial mushroom schematic placement to ensure it fits * add giant mycelium fungoidal structure * add giant mycelium to mapgen * fix settings for giant mycelium * make mycelium grow when players aren't present * allow mycelium growth to pause when it hits unloaded areas * add a use for giant mycelium * make giant mushrooms edible, make jungle trees growable * rough out the jungle biome * Make a spectrum of jungle growth * optimize pngs, add is_ground_content to everything * use custom is_ground_content method * fix a crash with veinstone, and simplify nvals_cave lookup now that overgen covers the same area * more fixes for overgen support * remove unintentional airspace from underside of slade * fix for overgen crash in level 2 * primordial column material, add sealed shafts to underworld * add seal block * Set up puzzle seals to be able to dig a staircase shaft through the slade layer. TODO: the puzzle to guard the trigger. * puzzle seals now fully functional. Need to add clues for decoding the keys next. * add a small bit of anti-griefing - the seal breach bell only tolls globally 13 times per activation * add flowers to the underworld warrior bones * switch to a different key bell * fancy up the puzzle seal temples with some custom blocks, add sub-slade grid passages * add a clue to the seal formspec * tweak background of inscription 2 so it's less obviously a copy of the background for inscription 1 * switch to compositing to save a few bytes * fancy up the seal's upper surface with inscriptions to make the formspec feel consistent * puzzle particle, bones were only spawning on top of structures * fix ice/oil on level 3, tweak some loot probabilities * add trail mod support * remove deprecated files * boost default plant growth delay, add growing selection boxes * update map colours * add named waypoints to the underworld * try a more efficient way of changing the interiors of columns * polishing up the Primordial layer * update guide with some Primordial teasers * updated magma sea screenshot * update mapgen_helper and subterrane * reduce density of megaflora a bit - was too hard to walk through * spreading_dirt_type depends on light, create my own ABM instead * add names to the glowing pits and some of the ruins * separate setting for ruin markers * record identity of slade-breachers * make mycelia climbable * update subterrane * change surface tunnel detection to allow above-ground stalactites and stalagmites * add rare thicker Goblin Caps, suitable for use as huts. * better goblin cap schematics * update colours * make it slightly harder to dig down through amethyst sheathing of pits * fixing up fungus light sensitivity, tree growth code * fix a few minor bugs * update deprecated functions * add various eating sounds * make mapping kit requirement more flexible * update spindlestem growth code, remove deprecated functions * fix leftover undefined variable * add fireflies to primordial, spread out the post-mapgen node timer for plant matter a bit more. * fix bones formspec * add lbm to upgrade old bones * fix slade undiggability * make torchspines smokey and manually lightable * fix drop definitions * generate dry stalactites in near-surface caverns. * caverns become far too smokey, alas * add pitter patter of spore tree spores, alternate paper recipe * new mapgen_helper metrics * add smokey back to torchspine now that it can be dialed down a bit * replace glowstone texture with a new animated one * switch from ABM to node timer for mapgen mycelium growth * make mapgen mycelium timer delay configurable * improve the efficiency of giant mycelium growth using flat node array, fewer dereferences * remove the smoke from torchspines again - it doesn't dissipate that deep underground * give slade a more muted, gloomy hue to differentiate it from nether stone * update screenshots with new slade colors * update mapgen_helper
2020-02-13 07:49:17 +01:00
is_ground_content = false,
node_box = {
type = "fixed",
fixed = stal_box_4,
},
drop = {
max_items = 1,
items = {
{
items = {"df_trees:torchspine_ember 2"}, -- Items to drop
rarity = 2, -- Probability of dropping is 1 / rarity
},
{
items = {"df_trees:torchspine_ember"}, -- Items to drop
rarity = 1, -- Probability of dropping is 1 / rarity
},
},
}, on_place = stal_on_place,
})
minetest.register_node("df_trees:torchspine_ember", {
description = S("Torchspine Ember"),
_doc_items_longdesc = df_trees.doc.torchspine_desc,
_doc_items_usagehelp = df_trees.doc.torchspine_usage,
tiles = {"dfcaverns_torchspine_0.5.png",},
groups = {oddly_breakable_by_hand = 1, subterrane_stal_align = 1, flow_through = 1},
drawtype = "nodebox",
paramtype = "light",
light_source = 2,
paramtype2 = "facedir",
walkable = false,
Primordial cavern layer (#12) * bring in the art assets from ClockGen's "better_caves_modpack" under CC BY 4.0,, code written from scratch. * update mapgen_helper * import ClockGen's giant mushroom schematics, make them and giant ferns growable * add giant jungle mushroom, rough out actual cavern layer code framework * fungal ceiling decorations * decorate fungal floor a bit * update mapgen_helper * update primordial mushroom schematic placement to ensure it fits * add giant mycelium fungoidal structure * add giant mycelium to mapgen * fix settings for giant mycelium * make mycelium grow when players aren't present * allow mycelium growth to pause when it hits unloaded areas * add a use for giant mycelium * make giant mushrooms edible, make jungle trees growable * rough out the jungle biome * Make a spectrum of jungle growth * optimize pngs, add is_ground_content to everything * use custom is_ground_content method * fix a crash with veinstone, and simplify nvals_cave lookup now that overgen covers the same area * more fixes for overgen support * remove unintentional airspace from underside of slade * fix for overgen crash in level 2 * primordial column material, add sealed shafts to underworld * add seal block * Set up puzzle seals to be able to dig a staircase shaft through the slade layer. TODO: the puzzle to guard the trigger. * puzzle seals now fully functional. Need to add clues for decoding the keys next. * add a small bit of anti-griefing - the seal breach bell only tolls globally 13 times per activation * add flowers to the underworld warrior bones * switch to a different key bell * fancy up the puzzle seal temples with some custom blocks, add sub-slade grid passages * add a clue to the seal formspec * tweak background of inscription 2 so it's less obviously a copy of the background for inscription 1 * switch to compositing to save a few bytes * fancy up the seal's upper surface with inscriptions to make the formspec feel consistent * puzzle particle, bones were only spawning on top of structures * fix ice/oil on level 3, tweak some loot probabilities * add trail mod support * remove deprecated files * boost default plant growth delay, add growing selection boxes * update map colours * add named waypoints to the underworld * try a more efficient way of changing the interiors of columns * polishing up the Primordial layer * update guide with some Primordial teasers * updated magma sea screenshot * update mapgen_helper and subterrane * reduce density of megaflora a bit - was too hard to walk through * spreading_dirt_type depends on light, create my own ABM instead * add names to the glowing pits and some of the ruins * separate setting for ruin markers * record identity of slade-breachers * make mycelia climbable * update subterrane * change surface tunnel detection to allow above-ground stalactites and stalagmites * add rare thicker Goblin Caps, suitable for use as huts. * better goblin cap schematics * update colours * make it slightly harder to dig down through amethyst sheathing of pits * fixing up fungus light sensitivity, tree growth code * fix a few minor bugs * update deprecated functions * add various eating sounds * make mapping kit requirement more flexible * update spindlestem growth code, remove deprecated functions * fix leftover undefined variable * add fireflies to primordial, spread out the post-mapgen node timer for plant matter a bit more. * fix bones formspec * add lbm to upgrade old bones * fix slade undiggability * make torchspines smokey and manually lightable * fix drop definitions * generate dry stalactites in near-surface caverns. * caverns become far too smokey, alas * add pitter patter of spore tree spores, alternate paper recipe * new mapgen_helper metrics * add smokey back to torchspine now that it can be dialed down a bit * replace glowstone texture with a new animated one * switch from ABM to node timer for mapgen mycelium growth * make mapgen mycelium timer delay configurable * improve the efficiency of giant mycelium growth using flat node array, fewer dereferences * remove the smoke from torchspines again - it doesn't dissipate that deep underground * give slade a more muted, gloomy hue to differentiate it from nether stone * update screenshots with new slade colors * update mapgen_helper
2020-02-13 07:49:17 +01:00
is_ground_content = false,
floodable = true,
node_box = {
type = "fixed",
fixed = {
{-0.0625 + x_disp, -0.5, -0.125 + z_disp, 0.125 + x_disp, -0.375, 0.0625 + z_disp},
}
},
on_place = stal_on_place,
on_construct = function(pos)
if df_trees.torchspine_growth_permitted(pos) then
minetest.get_node_timer(pos):start(math.random(torchspine_min_delay, torchspine_max_delay))
end
end,
on_destruct = function(pos)
minetest.get_node_timer(pos):stop()
end,
on_timer = function(pos)
minetest.swap_node(pos, {name="df_trees:torchspine_1", param2=minetest.get_node(pos).param2})
minetest.get_node_timer(pos):start(math.random(torchspine_min_delay, torchspine_max_delay))
end,
})
df_trees.spawn_torchspine = function(pos)
local x, y, z = pos.x, pos.y, pos.z
local stem_height = math.random(1,4)
local vm = minetest.get_voxel_manip()
local minp, maxp = vm:read_from_map(
{x = x, y = y, z = z},
{x = x, y = y+height-1, z = z}
)
local area = VoxelArea:new({MinEdge = minp, MaxEdge = maxp})
local data = vm:get_data()
local data_param2 = vm:get_param2_data()
df_trees.spawn_torchspine_vm(vi, area, data, data_param2, height)
vm:set_data(data)
vm:write_to_map()
vm:update_map()
end
local torchspine_c =
{
minetest.get_content_id("df_trees:torchspine_1"),
minetest.get_content_id("df_trees:torchspine_2"),
minetest.get_content_id("df_trees:torchspine_3"),
minetest.get_content_id("df_trees:torchspine_4")
}
local torchspine_lit_c =
{
minetest.get_content_id("df_trees:torchspine_1_lit"),
minetest.get_content_id("df_trees:torchspine_2"),
minetest.get_content_id("df_trees:torchspine_3"),
minetest.get_content_id("df_trees:torchspine_4")
}
df_trees.spawn_torchspine_vm = function(vi, area, data, data_param2, height, lit)
if height == nil then height = math.random(1,4) end
if lit == nil then lit = math.random() < 0.3 end
local param2 = math.random(0,3)
local list
if lit then list = torchspine_lit_c else list = torchspine_c end
for i = 0, height-1 do
if not minetest.registered_nodes[minetest.get_name_from_content_id(data[vi + area.ystride*i])].buildable_to then
height = i
break
end
end
for i = 0, height-1 do
local index = vi + area.ystride*i
data[index] = list[height-i]
data_param2[index] = param2
end
end
minetest.register_lbm({
label = "Start timers for torchspine nodes that used to depend on the ABM",
name = "df_trees:start_torchspine_timers",
nodenames = {"df_trees:torchspine_ember", "df_trees:torchspine_1", "df_trees:torchspine_1_lit"},
run_at_every_load = false,
action = function(pos, node)
minetest.get_node_timer(pos):start(math.random(torchspine_min_delay, torchspine_max_delay))
end,
})