mtcontrib/homedecor_modpack
1
0
Fork 2
mirror of https://github.com/mt-mods/homedecor_modpack.git synced 2024-11-16 07:10:35 +01:00
Code Issues Releases Wiki Activity
c62257ccbf
homedecor_modpack/homedecor_lighting/init.lua

1903 lines
56 KiB
Lua
Raw Normal View History

Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
-- This file supplies the majority of homedecor's lighting
Changed nodename of yellow lighting to clearly specify that (recipes are still the same). Added white lighting.
2012-10-02 01:22:54 +02:00
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
local S = minetest.get_translator("homedecor_lighting")
homedecor_lighting = {}
Added localization support
2013-03-05 08:18:56 +01:00
make table- and standing lamps respond to diglines messages "off", "low", "med", "hi", "max". Any other message is ignored shift-punch to set the digiline channel only connects from X/Z directions right-click still cycles brightness as before also adds protection check for right-click brightness changing
2019-05-27 00:59:45 +02:00
local function is_protected(pos, clicker)
if minetest.is_protected(pos, clicker:get_player_name()) then
minetest.record_protection_violation(pos,
clicker:get_player_name())
return true
end
return false
end
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
local hd_mesecons = minetest.get_modpath("mesecons")
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
-- control and brightness for dimmable lamps
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local word_to_bright = {
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
["off"] = 0,
["low"] = 3,
["med"] = 7,
["hi"] = 11,
["on"] = 14,
["max"] = 14,
}
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
local rules_alldir = {
{x = 0, y = 0, z = 1},
reorder rules_alldir in homedecor_lightning/init.lua so it can read by y-axis and then line by line of 2d coordinates if you express the connections in ascii where N is the Node 1 is connected and 0 is not connected: ``` y+0: 010 1N1 010 y+1: 010 111 010 y-1: 010 111 010 ``` This code structure is more easy to read / a very close representation of the sketched layers.
2020-11-19 17:41:12 +01:00
{x = -1, y = 0, z = 0},
{x = 1, y = 0, z = 0},
{x = 0, y = 0, z = -1}, -- borrowed from lightstones
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
{x = 0, y = 1, z = 1},
reorder rules_alldir in homedecor_lightning/init.lua so it can read by y-axis and then line by line of 2d coordinates if you express the connections in ascii where N is the Node 1 is connected and 0 is not connected: ``` y+0: 010 1N1 010 y+1: 010 111 010 y-1: 010 111 010 ``` This code structure is more easy to read / a very close representation of the sketched layers.
2020-11-19 17:41:12 +01:00
{x = -1, y = 1, z = 0},
{x = 0, y = 1, z = 0},
{x = 1, y = 1, z = 0},
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
{x = 0, y = 1, z = -1},
reorder rules_alldir in homedecor_lightning/init.lua so it can read by y-axis and then line by line of 2d coordinates if you express the connections in ascii where N is the Node 1 is connected and 0 is not connected: ``` y+0: 010 1N1 010 y+1: 010 111 010 y-1: 010 111 010 ``` This code structure is more easy to read / a very close representation of the sketched layers.
2020-11-19 17:41:12 +01:00
{x = 0, y = -1, z = 1},
{x = -1, y = -1, z = 0},
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
{x = 0, y = -1, z = 0},
reorder rules_alldir in homedecor_lightning/init.lua so it can read by y-axis and then line by line of 2d coordinates if you express the connections in ascii where N is the Node 1 is connected and 0 is not connected: ``` y+0: 010 1N1 010 y+1: 010 111 010 y-1: 010 111 010 ``` This code structure is more easy to read / a very close representation of the sketched layers.
2020-11-19 17:41:12 +01:00
{x = 1, y = -1, z = 0},
{x = 0, y = -1, z = -1},
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
}
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
-- mesecons compatibility
local actions
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
if hd_mesecons then
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
actions = {
action_off = function(pos, node)
local sep = string.find(node.name, "_", -5)
if minetest.get_meta(pos):get_int("toggled") > 0 then
minetest.swap_node(pos, {
name = string.sub(node.name, 1, sep - 1).."_off",
param2 = node.param2
})
end
end,
action_on = function(pos, node)
minetest.get_meta(pos):set_int("toggled", 1)
local sep = string.find(node.name, "_", -5)
minetest.swap_node(pos, {
name = string.sub(node.name, 1, sep - 1).."_on",
param2 = node.param2
})
end
}
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
homedecor_lighting.mesecon_wall_light = {
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
effector = table.copy(actions)
}
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
homedecor_lighting.mesecon_wall_light.effector.rules = mesecon.rules.wallmounted_get
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
homedecor_lighting.mesecon_alldir_light = {
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
effector = table.copy(actions),
mesecons support, wip
2019-05-26 03:35:38 +02:00
}
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
homedecor_lighting.mesecon_alldir_light.effector.rules = rules_alldir
mesecons support, wip
2019-05-26 03:35:38 +02:00
end
make table- and standing lamps respond to diglines messages "off", "low", "med", "hi", "max". Any other message is ignored shift-punch to set the digiline channel only connects from X/Z directions right-click still cycles brightness as before also adds protection check for right-click brightness changing
2019-05-27 00:59:45 +02:00
-- digilines compatibility
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
-- this one is based on the so-named one in Jeija's digilines mod
make table- and standing lamps respond to diglines messages "off", "low", "med", "hi", "max". Any other message is ignored shift-punch to set the digiline channel only connects from X/Z directions right-click still cycles brightness as before also adds protection check for right-click brightness changing
2019-05-27 00:59:45 +02:00
local player_last_clicked = {}
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
local digiline_on_punch
make table- and standing lamps respond to diglines messages "off", "low", "med", "hi", "max". Any other message is ignored shift-punch to set the digiline channel only connects from X/Z directions right-click still cycles brightness as before also adds protection check for right-click brightness changing
2019-05-27 00:59:45 +02:00
if minetest.get_modpath("digilines") then
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
local on_digiline_receive_string = function(pos, node, channel, msg)
prevent crash if receiving a null message string or channel
2019-07-16 12:45:04 +02:00
if not msg or not channel then return end
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
local meta = minetest.get_meta(pos)
local setchan = meta:get_string("channel")
if setchan ~= channel then return end
allow numeric messages for dimmable lamps allow non-dimmables to respond to "off", "low", "med", "hi", "max", "on" number messages for dimmables: 0 turns the light off 1-3 sets it to "low" 4-7 sets it to "med" 8-11 sets it to "hi" 12+ sets it to "max" (i.e. full-on) non-dimmables: a number > 3 or the strings "med", "hi", "max", or "on" turn the light on a number < 4 or the strings "off" and "low" turn the light off
2019-06-02 05:13:02 +02:00
fix the 'fix'
2019-09-20 02:55:56 +02:00
if msg ~= "" and (type(msg) == "string" or type(msg) == "number" ) then
allow numeric messages for dimmable lamps allow non-dimmables to respond to "off", "low", "med", "hi", "max", "on" number messages for dimmables: 0 turns the light off 1-3 sets it to "low" 4-7 sets it to "med" 8-11 sets it to "hi" 12+ sets it to "max" (i.e. full-on) non-dimmables: a number > 3 or the strings "med", "hi", "max", or "on" turn the light on a number < 4 or the strings "off" and "low" turn the light off
2019-06-02 05:13:02 +02:00
local n = tonumber(msg)
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local suff = word_to_bright[msg] or "invalid"
allow numeric messages for dimmable lamps allow non-dimmables to respond to "off", "low", "med", "hi", "max", "on" number messages for dimmables: 0 turns the light off 1-3 sets it to "low" 4-7 sets it to "med" 8-11 sets it to "hi" 12+ sets it to "max" (i.e. full-on) non-dimmables: a number > 3 or the strings "med", "hi", "max", or "on" turn the light on a number < 4 or the strings "off" and "low" turn the light off
2019-06-02 05:13:02 +02:00
local basename = string.sub(node.name, 1, string.find(node.name, "_", -5) - 1)
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
if minetest.registered_nodes[basename.."_"..msg] then
minetest.swap_node(pos, {name = basename.."_"..msg, param2 = node.param2})
elseif minetest.registered_nodes[basename.."_"..suff] then
minetest.swap_node(pos, {name = basename.."_"..suff, param2 = node.param2})
elseif minetest.registered_nodes[basename.."_on"]
and (msg == "med" or msg == "hi" or msg == "max" or (n and n > 3)) then
minetest.swap_node(pos, {name = basename.."_on", param2 = node.param2})
elseif minetest.registered_nodes[basename.."_off"]
and (msg == "low" or (n and n < 4)) then
minetest.swap_node(pos, {name = basename.."_off", param2 = node.param2})
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
end
end
end
make table- and standing lamps respond to diglines messages "off", "low", "med", "hi", "max". Any other message is ignored shift-punch to set the digiline channel only connects from X/Z directions right-click still cycles brightness as before also adds protection check for right-click brightness changing
2019-05-27 00:59:45 +02:00
minetest.register_on_player_receive_fields(function(player, formname, fields)
local name = player:get_player_name()
local pos = player_last_clicked[name]
if pos and formname == "homedecor:lamp_set_channel" then
if is_protected(pos, player) then return end
if (fields.channel) then
local meta = minetest.get_meta(pos)
meta:set_string("channel", fields.channel)
end
end
end)
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
if hd_mesecons then
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
homedecor_lighting.digiline_wall_light = {
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
effector = {
action = on_digiline_receive_string,
},
wire = {
rules = mesecon.rules.wallmounted_get
}
}
else
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
homedecor_lighting.digiline_wall_light = {
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
effector = {
action = on_digiline_receive_string,
},
wire = {
rules = rules_alldir
}
}
end
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
homedecor_lighting.digiline_alldir_light = {
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
effector = {
action = on_digiline_receive_string,
},
wire = {
rules = rules_alldir
}
}
function digiline_on_punch(pos, node, puncher, pointed_thing)
make table- and standing lamps respond to diglines messages "off", "low", "med", "hi", "max". Any other message is ignored shift-punch to set the digiline channel only connects from X/Z directions right-click still cycles brightness as before also adds protection check for right-click brightness changing
2019-05-27 00:59:45 +02:00
if is_protected(pos, puncher) then return end
if puncher:get_player_control().sneak then
local name = puncher:get_player_name()
player_last_clicked[name] = pos
Don't allow engine to add the implicit "Proceed" button (on lights anyway; this change makes it possible to theme the formspec)
2021-02-25 08:13:21 +01:00
local form = "formspec_version[4]"..
"size[8,4]"..
"button_exit[3,2.5;2,0.5;proceed;Proceed]"..
"field[1.75,1.5;4.5,0.5;channel;Channel;]"
make table- and standing lamps respond to diglines messages "off", "low", "med", "hi", "max". Any other message is ignored shift-punch to set the digiline channel only connects from X/Z directions right-click still cycles brightness as before also adds protection check for right-click brightness changing
2019-05-27 00:59:45 +02:00
minetest.show_formspec(name, "homedecor:lamp_set_channel", form)
end
end
end
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
-- turn on/off, cycle brightness
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
function homedecor_lighting.toggle_light(pos, node, clicker, itemstack, pointed_thing)
make table- and standing lamps respond to diglines messages "off", "low", "med", "hi", "max". Any other message is ignored shift-punch to set the digiline channel only connects from X/Z directions right-click still cycles brightness as before also adds protection check for right-click brightness changing
2019-05-27 00:59:45 +02:00
if is_protected(pos, clicker) then return end
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local sep = string.find(node.name, "_", -5)
local level = string.sub(node.name, sep + 1)
local n = tonumber(level) or 0
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
local newsuff
add aliases for rope lights (on/14, off/0) make right-click handler work properly for plain "on"/"off" items
2019-06-15 12:47:33 +02:00
if level == "on" then
newsuff = "_off"
elseif level == "off" then
newsuff = "_on"
elseif n > 3 then
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
newsuff = "_0"
add aliases for rope lights (on/14, off/0) make right-click handler work properly for plain "on"/"off" items
2019-06-15 12:47:33 +02:00
else
newsuff = "_14"
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
end
minetest.swap_node(pos, {name = string.sub(node.name, 1, sep - 1)..newsuff, param2 = node.param2})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
end
Convert glowlights/glowcubes to 6d facedir
2013-04-24 18:30:21 +02:00
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
------------------
-- Dimmable lights
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
--for light_brightn_name in pairs(word_to_bright) do
removed obsolete glowlight ABMs
2017-01-29 04:11:18 +01:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
for brightness_level = 0, 14 do
fill-out mesecons support for first few lights, also removed debug prints Lights are forced-on when placed, and remain so until they receive a mesecons "off" signal. Lights can be toggled on/off independent of the mesecon signal state by right click, which will persist until the next signal transition, which will change the light to follow.
2019-05-26 04:50:59 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local tiles
local overlay
Convert glowlights/glowcubes to 6d facedir
2013-04-24 18:30:21 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local onflag = (brightness_level > 0)
local nici = (brightness_level ~= 14) and 1 or nil
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local gen_ls_tex_white = "homedecor_generic_light_source_off.png"
if onflag then gen_ls_tex_white = "homedecor_generic_light_source_white.png" end
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local gen_ls_tex_yellow = "homedecor_generic_light_source_off.png"
if onflag then gen_ls_tex_yellow = "homedecor_generic_light_source_yellow.png" end
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local h = (brightness_level == 0) and "0" or string.format("%x", brightness_level+1)
local brightness_hex = tonumber("0xff"..string.rep(h, 6))
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local glowlight_nodebox = {
half = homedecor.nodebox.slab_y(1/2),
quarter = homedecor.nodebox.slab_y(1/4),
small_cube = {
type = "fixed",
fixed = { -0.25, -0.5, -0.25, 0.25, 0, 0.25 }
},
}
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local base = "homedecor_glowlight_base.png"
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local tb_edges = "homedecor_glowlight_tb_edges.png"
local sides_edges = "homedecor_glowlight_thick_sides_edges.png"
local sides_glare = "homedecor_glowlight_thick_sides_glare.png"
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
if onflag then
tiles = {
"("..base.."^"..tb_edges..")^[brighten",
"("..base.."^"..tb_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
}
overlay = {
{ name = "homedecor_glowlight_top_glare.png", color = "white"},
"",
{ name = sides_glare, color = "white"},
{ name = sides_glare, color = "white"},
{ name = sides_glare, color = "white"},
{ name = sides_glare, color = "white"},
}
else
tiles = {
base.."^"..tb_edges,
base.."^"..tb_edges,
base.."^"..sides_edges,
base.."^"..sides_edges,
base.."^"..sides_edges,
base.."^"..sides_edges,
}
overlay = nil
end
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_node(":homedecor:glowlight_half_"..brightness_level, {
description = S("Thick Glowlight"),
tiles = tiles,
overlay_tiles = overlay,
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "blend",
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drawtype = "nodebox",
paramtype = "light",
paramtype2 = "colorwallmounted",
palette = "unifieddyes_palette_colorwallmounted.png",
selection_box = {
type = "wallmounted",
wall_top = { -0.5, 0, -0.5, 0.5, 0.5, 0.5 },
wall_bottom = { -0.5, -0.5, -0.5, 0.5, 0, 0.5 },
wall_side = { -0.5, -0.5, -0.5, 0, 0.5, 0.5 }
},
node_box = glowlight_nodebox.half,
groups = { snappy = 3, ud_param2_colorable = 1, not_in_creative_inventory = nici },
light_source = brightness_level,
sounds = default.node_sound_glass_defaults(),
after_place_node = function(pos, placer, itemstack, pointed_thing)
unifieddyes.fix_rotation(pos, placer, itemstack, pointed_thing)
end,
use Unified Dyes on_dig where needed - requires Unified Dyes commit 9ff40a7f or later
2019-07-18 08:16:46 +02:00
on_dig = unifieddyes.on_dig,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drop = {
items = {
{items = {"homedecor:glowlight_half_on"}, inherit_color = true },
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
}
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_wall_light,
digiline = homedecor_lighting.digiline_wall_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_punch = digiline_on_punch
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
sides_edges = "homedecor_glowlight_thin_sides_edges.png"
sides_glare = "homedecor_glowlight_thin_sides_glare.png"
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
if onflag then
tiles = {
"("..base.."^"..tb_edges..")^[brighten",
"("..base.."^"..tb_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
}
overlay = {
{ name = "homedecor_glowlight_top_glare.png", color = "white"},
"",
{ name = sides_glare, color = "white"},
{ name = sides_glare, color = "white"},
{ name = sides_glare, color = "white"},
{ name = sides_glare, color = "white"},
}
else
tiles = {
base.."^"..tb_edges,
base.."^"..tb_edges,
base.."^"..sides_edges,
base.."^"..sides_edges,
base.."^"..sides_edges,
base.."^"..sides_edges,
}
overlay = nil
end
minetest.register_node(":homedecor:glowlight_quarter_"..brightness_level, {
description = S("Thin Glowlight"),
tiles = tiles,
overlay_tiles = overlay,
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "blend",
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drawtype = "nodebox",
paramtype = "light",
paramtype2 = "colorwallmounted",
palette = "unifieddyes_palette_colorwallmounted.png",
selection_box = {
type = "wallmounted",
wall_top = { -0.5, 0.25, -0.5, 0.5, 0.5, 0.5 },
wall_bottom = { -0.5, -0.5, -0.5, 0.5, -0.25, 0.5 },
wall_side = { -0.5, -0.5, -0.5, -0.25, 0.5, 0.5 }
},
node_box = glowlight_nodebox.quarter,
groups = { snappy = 3, ud_param2_colorable = 1, not_in_creative_inventory = nici },
light_source = brightness_level,
sounds = default.node_sound_glass_defaults(),
after_place_node = function(pos, placer, itemstack, pointed_thing)
unifieddyes.fix_rotation(pos, placer, itemstack, pointed_thing)
end,
use Unified Dyes on_dig where needed - requires Unified Dyes commit 9ff40a7f or later
2019-07-18 08:16:46 +02:00
on_dig = unifieddyes.on_dig,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drop = {
items = {
{items = {"homedecor:glowlight_quarter_on"}, inherit_color = true },
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
}
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_wall_light,
digiline = homedecor_lighting.digiline_wall_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_punch = digiline_on_punch
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
tb_edges = "homedecor_glowlight_cube_tb_edges.png"
sides_edges = "homedecor_glowlight_cube_sides_edges.png"
sides_glare = "homedecor_glowlight_cube_sides_glare.png"
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
if onflag then
tiles = {
"("..base.."^"..tb_edges..")^[brighten",
"("..base.."^"..tb_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
"("..base.."^"..sides_edges..")^[brighten",
}
overlay = {
{ name = "homedecor_glowlight_cube_top_glare.png", color = "white"},
"",
{ name = sides_glare, color = "white"},
{ name = sides_glare, color = "white"},
{ name = sides_glare, color = "white"},
{ name = sides_glare, color = "white"},
}
else
tiles = {
base.."^"..tb_edges,
base.."^"..tb_edges,
base.."^"..sides_edges,
base.."^"..sides_edges,
base.."^"..sides_edges,
base.."^"..sides_edges,
}
overlay = nil
end
Add plasma lamp
2014-06-29 18:49:35 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_node(":homedecor:glowlight_small_cube_"..brightness_level, {
description = S("Small Glowlight Cube"),
tiles = tiles,
overlay_tiles = overlay,
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "blend",
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
paramtype = "light",
paramtype2 = "colorwallmounted",
drawtype = "nodebox",
palette = "unifieddyes_palette_colorwallmounted.png",
selection_box = {
type = "wallmounted",
wall_top = { -0.25, 0, -0.25, 0.25, 0.5, 0.25 },
wall_bottom = { -0.25, -0.5, -0.25, 0.25, 0, 0.25 },
wall_side = { -0.5, -0.25, -0.25, 0, 0.25, 0.25 }
},
node_box = glowlight_nodebox.small_cube,
groups = { snappy = 3, ud_param2_colorable = 1, not_in_creative_inventory = nici },
light_source = brightness_level,
sounds = default.node_sound_glass_defaults(),
after_place_node = function(pos, placer, itemstack, pointed_thing)
unifieddyes.fix_rotation(pos, placer, itemstack, pointed_thing)
end,
use Unified Dyes on_dig where needed - requires Unified Dyes commit 9ff40a7f or later
2019-07-18 08:16:46 +02:00
on_dig = unifieddyes.on_dig,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drop = {
items = {
{items = {"homedecor:glowlight_small_cube_on"}, inherit_color = true },
add drops
2019-05-26 02:50:30 +02:00
}
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_wall_light,
digiline = homedecor_lighting.digiline_wall_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_punch = digiline_on_punch
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local lighttex
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
if onflag then
local b = (brightness_level > 6) and brightness_level or 6
local brightened = "^[multiply:#"..string.rep(string.format("%x", b), 6)
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
lighttex = {
name="homedecor_plasma_storm.png"..brightened,
# Compress Plasma Animations Reduced the plasma animations from 64x64 to 48x48 each. Updated the aspect ratios in the .lua files referencing them. Total Reduction:
2021-01-23 15:48:17 +01:00
animation={type="vertical_frames", aspect_w=48, aspect_h=48, length=2.0},
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
}
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
else
lighttex = "homedecor_plasma_lamp_off.png"
end
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
homedecor.register("plasma_lamp_"..brightness_level, {
description = S("Plasma Lamp/Light"),
drawtype = "mesh",
mesh = "plasma_lamp.obj",
tiles = {
"default_gold_block.png",
lighttex
},
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "blend",
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
light_source = brightness_level,
sunlight_propagates = true,
groups = {cracky=3, oddly_breakable_by_hand=3, not_in_creative_inventory = nici},
sounds = default.node_sound_glass_defaults(),
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drop = {
items = {
{items = {"homedecor:plasma_lamp_on"}},
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_alldir_light,
digiline = homedecor_lighting.digiline_alldir_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_punch = digiline_on_punch
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local gl_cbox = {
type = "fixed",
fixed = { -0.25, -0.5, -0.25, 0.25, 0.45, 0.25 },
}
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
homedecor.register("ground_lantern_"..brightness_level, {
description = S("Ground Lantern/Light"),
mesh = "homedecor_ground_lantern.obj",
tiles = { gen_ls_tex_yellow, "homedecor_generic_metal_wrought_iron.png" },
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "blend",
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
inventory_image = "homedecor_ground_lantern_inv.png",
wield_image = "homedecor_ground_lantern_inv.png",
groups = {snappy=3, not_in_creative_inventory = nici},
light_source = brightness_level,
selection_box = gl_cbox,
walkable = false,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drop = {
items = {
{items = {"homedecor:ground_lantern_on"}},
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_alldir_light,
digiline = homedecor_lighting.digiline_alldir_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_punch = digiline_on_punch
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local hl_cbox = {
type = "fixed",
fixed = { -0.25, -0.5, -0.2, 0.25, 0.5, 0.5 },
}
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
homedecor.register("hanging_lantern_"..brightness_level, {
description = S("Hanging Lantern/Light"),
mesh = "homedecor_hanging_lantern.obj",
tiles = { "homedecor_generic_metal_wrought_iron.png", gen_ls_tex_yellow },
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "blend",
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
inventory_image = "homedecor_hanging_lantern_inv.png",
wield_image = "homedecor_hanging_lantern_inv.png",
groups = {snappy=3, not_in_creative_inventory = nici},
light_source = brightness_level,
selection_box = hl_cbox,
walkable = false,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drop = {
items = {
{items = {"homedecor:hanging_lantern_on"}},
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_alldir_light,
digiline = homedecor_lighting.digiline_alldir_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_punch = digiline_on_punch
})
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local cl_cbox = {
type = "fixed",
fixed = { -0.35, -0.45, -0.35, 0.35, 0.5, 0.35 }
}
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
homedecor.register("ceiling_lantern_"..brightness_level, {
drawtype = "mesh",
mesh = "homedecor_ceiling_lantern.obj",
tiles = { gen_ls_tex_yellow, "homedecor_generic_metal_wrought_iron.png" },
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "blend",
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
inventory_image = "homedecor_ceiling_lantern_inv.png",
description = S("Ceiling Lantern/Light"),
groups = {snappy=3, not_in_creative_inventory = nici},
light_source = brightness_level,
selection_box = cl_cbox,
walkable = false,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drop = {
items = {
{items = {"homedecor:ceiling_lantern_on"}},
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_alldir_light,
digiline = homedecor_lighting.digiline_alldir_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_punch = digiline_on_punch
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
if not minetest.get_modpath("darkage") then
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
homedecor.register("lattice_lantern_large_"..brightness_level, {
description = S("Lattice lantern/Light (large)"),
tiles = { gen_ls_tex_yellow.."^homedecor_lattice_lantern_large_overlay.png" },
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "clip",
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
groups = { snappy = 3, not_in_creative_inventory = nici },
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
light_source = brightness_level,
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
sounds = default.node_sound_glass_defaults(),
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
drop = {
items = {
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
{items = {"homedecor:lattice_lantern_large_on"}},
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_alldir_light,
digiline = homedecor_lighting.digiline_alldir_light,
Rearrange mesecons, diglines, dimmable functions and related, tweak digiline stuff to be more generic, and add various digilines connections rules to complement mesecons rules. Mesecons must be present to get the "wallmounted" rules for digilines nodes. Without mesecons, nodes that want wall rules will get alldir rules instead. Add mesecons support to table and standing lamps (off -> max -> off). Add digilines support to all other lights that now support mesecons, except rope lights, since they're a mesecon conductor. (will approach that last one later)
2019-05-30 02:34:29 +02:00
on_punch = digiline_on_punch
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
})
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
end
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local lighttex_tb
local lighttex_sides
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
if onflag then
lighttex_tb = "homedecor_lattice_lantern_small_tb_light.png"
lighttex_sides = "homedecor_lattice_lantern_small_sides_light.png"
else
lighttex_tb = "homedecor_generic_light_source_off.png"
lighttex_sides = "homedecor_generic_light_source_off.png"
end
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
homedecor.register("lattice_lantern_small_"..brightness_level, {
description = S("Lattice lantern/light (small)"),
tiles = {
lighttex_tb.."^homedecor_lattice_lantern_small_tb_overlay.png",
lighttex_tb.."^homedecor_lattice_lantern_small_tb_overlay.png",
lighttex_sides.."^homedecor_lattice_lantern_small_sides_overlay.png"
},
selection_box = {
type = "fixed",
fixed = { -0.25, -0.5, -0.25, 0.25, 0, 0.25 }
},
node_box = {
type = "fixed",
fixed = { -0.25, -0.5, -0.25, 0.25, 0, 0.25 }
},
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "clip",
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
groups = { snappy = 3, not_in_creative_inventory = nici },
light_source = brightness_level,
sounds = default.node_sound_glass_defaults(),
on_place = minetest.rotate_node,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drop = {
items = {
{items = {"homedecor:lattice_lantern_small_on"}},
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_alldir_light,
digiline = homedecor_lighting.digiline_alldir_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_punch = digiline_on_punch
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
-- "gooseneck" style desk lamps
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local dlamp_cbox = {
type = "wallmounted",
wall_side = { -0.2, -0.5, -0.15, 0.32, 0.12, 0.15 },
}
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
homedecor.register("desk_lamp_"..brightness_level, {
description = S("Desk Lamp/Light"),
mesh = "homedecor_desk_lamp.obj",
tiles = {
"homedecor_generic_metal.png",
"homedecor_generic_metal.png",
{ name = "homedecor_generic_metal.png", color = homedecor.color_med_grey },
{ name = gen_ls_tex_white, color = brightness_hex },
},
inventory_image = "homedecor_desk_lamp_inv.png",
paramtype = "light",
paramtype2 = "colorwallmounted",
palette = "unifieddyes_palette_colorwallmounted.png",
selection_box = dlamp_cbox,
node_box = dlamp_cbox,
walkable = false,
groups = {snappy=3, ud_param2_colorable = 1, not_in_creative_inventory = nici},
after_place_node = function(pos, placer, itemstack, pointed_thing)
unifieddyes.fix_rotation_nsew(pos, placer, itemstack, pointed_thing)
end,
use Unified Dyes on_dig where needed - requires Unified Dyes commit 9ff40a7f or later
2019-07-18 08:16:46 +02:00
on_dig = unifieddyes.on_dig,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_rotate = unifieddyes.fix_after_screwdriver_nsew,
light_source = brightness_level,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drop = {
items = {
{items = {"homedecor:desk_lamp_on"}, inherit_color = true },
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_alldir_light,
digiline = homedecor_lighting.digiline_alldir_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_punch = digiline_on_punch
})
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
-- "kitchen"/"dining room" ceiling lamp
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
homedecor.register("ceiling_lamp_"..brightness_level, {
description = S("Ceiling Lamp/Light"),
mesh = "homedecor_ceiling_lamp.obj",
tiles = {
"homedecor_generic_metal_brass.png",
"homedecor_ceiling_lamp_glass.png",
gen_ls_tex_white,
{ name = "homedecor_generic_plastic.png", color = 0xff442d04 },
},
inventory_image = "homedecor_ceiling_lamp_inv.png",
light_source = brightness_level,
groups = {snappy=3, not_in_creative_inventory = nici},
walkable = false,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
drop = {
items = {
{items = {"homedecor:ceiling_lamp_on"}},
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_alldir_light,
digiline = homedecor_lighting.digiline_alldir_light,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
on_punch = digiline_on_punch
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
local tlamp_cbox = {
type = "fixed",
fixed = { -0.25, -0.5, -0.25, 0.25, 0.5, 0.25 }
}
local slamp_cbox = {
type = "fixed",
fixed = { -0.25, -0.5, -0.25, 0.25, 1.5, 0.25 }
}
local wool_brightened = "wool_grey.png^[colorize:#ffffff:"..(brightness_level * 15)
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
homedecor.register("table_lamp_"..brightness_level, {
description = S("Table Lamp/Light"),
mesh = "homedecor_table_lamp.obj",
tiles = {
wool_brightened,
{ name = gen_ls_tex_white, color = brightness_hex },
{ name = "homedecor_generic_wood_red.png", color = 0xffffffff },
{ name = "homedecor_generic_metal.png", color = homedecor.color_black },
},
inventory_image = "homedecor_table_lamp_foot_inv.png^homedecor_table_lamp_top_inv.png",
paramtype = "light",
paramtype2 = "color",
palette = "unifieddyes_palette_extended.png",
walkable = false,
light_source = brightness_level,
selection_box = tlamp_cbox,
sounds = default.node_sound_wood_defaults(),
groups = {cracky=2,oddly_breakable_by_hand=1, ud_param2_colorable = 1, not_in_creative_inventory=nici },
drop = {
items = {
{items = {"homedecor:table_lamp_hi"}, inherit_color = true },
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
digiline = homedecor_lighting.digiline_alldir_light,
mesecons = homedecor_lighting.mesecon_wall_light,
on_rightclick = homedecor_lighting.toggle_light,
use Unified Dyes on_dig where needed - requires Unified Dyes commit 9ff40a7f or later
2019-07-18 08:16:46 +02:00
on_punch = digiline_on_punch,
on_dig = unifieddyes.on_dig,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
})
homedecor.register("standing_lamp_"..brightness_level, {
description = S("Standing Lamp/Light"),
mesh = "homedecor_standing_lamp.obj",
tiles = {
wool_brightened,
{ name = gen_ls_tex_white, color = brightness_hex },
{ name = "homedecor_generic_wood_red.png", color = 0xffffffff },
{ name = "homedecor_generic_metal.png", color = homedecor.color_black },
},
inventory_image = "homedecor_standing_lamp_foot_inv.png^homedecor_standing_lamp_top_inv.png",
paramtype = "light",
paramtype2 = "color",
palette = "unifieddyes_palette_extended.png",
walkable = false,
fix wrong light value on standing lamps
2019-06-06 10:37:26 +02:00
light_source = brightness_level,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
groups = {cracky=2,oddly_breakable_by_hand=1, ud_param2_colorable = 1, not_in_creative_inventory=nici },
selection_box = slamp_cbox,
sounds = default.node_sound_wood_defaults(),
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rotate = minetest.get_modpath("screwdriver") and screwdriver.rotate_simple or nil,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
--expand = { top="air" },
drop = {
items = {
{items = {"homedecor:standing_lamp_hi"}, inherit_color = true },
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
digiline = homedecor_lighting.digiline_alldir_light,
mesecons = homedecor_lighting.mesecon_wall_light,
on_rightclick = homedecor_lighting.toggle_light,
use Unified Dyes on_dig where needed - requires Unified Dyes commit 9ff40a7f or later
2019-07-18 08:16:46 +02:00
on_punch = digiline_on_punch,
on_dig = unifieddyes.on_dig,
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
})
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
end
------------------------------------------
-- Simple non-dimmable, on/off-only lights
for _, light_brightn_name in ipairs({"off", "on"}) do
local onflag = (light_brightn_name == "on")
fix bad not-in-creative-inventory flags on wall lamp and plasma ball
2019-06-02 08:51:41 +02:00
local nici = (light_brightn_name == "off") and 1 or nil
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
local nici_m = (light_brightn_name == "off") and 1 or nil
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
local on_rc = homedecor_lighting.toggle_light
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
local di = "on"
if hd_mesecons then
nici_m = (light_brightn_name ~= "off") and 1 or nil
on_rc = nil
di = "off"
end
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
local gen_ls_tex_white = "homedecor_generic_light_source_off.png"
if onflag then gen_ls_tex_white = "homedecor_generic_light_source_white.png" end
move "medieval" wall lamp and torch to homedecor_lighting make them mesecon/digiline controllable (on/off only, alldir rules) also fix a couple of old texture references
2019-06-02 08:35:20 +02:00
local gen_ls_tex_yellow = "homedecor_generic_light_source_off.png"
if onflag then gen_ls_tex_yellow = "homedecor_generic_light_source_yellow.png" end
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
local lighttex = "homedecor_blanktile.png"
if onflag then
lighttex = {
name = "homedecor_plasma_ball_streamers.png",
# Compress Plasma Animations Reduced the plasma animations from 64x64 to 48x48 each. Updated the aspect ratios in the .lua files referencing them. Total Reduction:
2021-01-23 15:48:17 +01:00
animation={type="vertical_frames", aspect_w=48, aspect_h=48, length=2.0},
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
}
end
homedecor.register("plasma_ball_"..light_brightn_name, {
add "light" to a couple of descriptions, for easier searching
2019-06-06 10:38:13 +02:00
description = S("Plasma Ball/light"),
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
mesh = "homedecor_plasma_ball.obj",
tiles = {
{ name = "homedecor_generic_plastic.png", color = homedecor.color_black },
lighttex,
"homedecor_plasma_ball_glass.png"
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
},
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
inventory_image = "homedecor_plasma_ball_inv.png",
selection_box = {
type = "fixed",
fixed = { -0.1875, -0.5, -0.1875, 0.1875, 0, 0.1875 }
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
},
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
walkable = false,
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "blend",
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
light_source = onflag and (default.LIGHT_MAX - 5) or nil,
sunlight_propagates = true,
groups = {cracky=3, oddly_breakable_by_hand=3, not_in_creative_inventory = nici},
sounds = default.node_sound_glass_defaults(),
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
add drops
2019-05-26 02:50:30 +02:00
drop = {
items = {
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
{items = {"homedecor:plasma_ball_on"}},
add drops
2019-05-26 02:50:30 +02:00
}
Add mesecons support for the rest of the other relevant lights Each light connects only according to what sides make sense. For example: * a plasma lamp cube or large lattice lamp will connect from all 6 sides * a ground lantern will only connect from its NSEW sides, not its top or bottom * a glowlight slab, glowlight cube, or lattice cube uses the same rules as mesecons lamps, so its four edges and it back/bottom, whatever its orientation, but not its top/front. * a (kitchen) ceiling lamp, and a (hanging, exterior) ceiling lantern will only connect from the top. Rope lights are defined as a conductor, just like a mesecons wire, so if mesecons is present, they will default to off unless powered by a mesecons wire/switch/etc. You can still right-click-toggle individual segments on/off. Ceiling rope light connection rules are a little funky, but they work (I wanted them to only connect from the top, but I couldn't get it just right). Floor-orientation connections are straightforward.
2019-05-26 05:52:42 +02:00
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
mesecons = homedecor_lighting.mesecon_alldir_light,
digiline = homedecor_lighting.digiline_alldir_light,
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
on_punch = digiline_on_punch
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
})
move "medieval" wall lamp and torch to homedecor_lighting make them mesecon/digiline controllable (on/off only, alldir rules) also fix a couple of old texture references
2019-06-02 08:35:20 +02:00
local wl_cbox = {
type = "fixed",
fixed = { -0.2, -0.5, 0, 0.2, 0.5, 0.5 },
}
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
-- rope lighting
minetest.register_node(":homedecor:rope_light_on_floor_"..light_brightn_name, {
Update german locale
2020-10-09 06:57:41 +02:00
description = S("Rope lighting (on floor)"),
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
inventory_image = "homedecor_rope_light_on_floor.png",
paramtype = "light",
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
light_source = word_to_bright[light_brightn_name],
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
walkable = false,
sunlight_propagates = true,
tiles = { gen_ls_tex_white },
drawtype = "nodebox",
node_box = {
type = "connected",
fixed = {},
connect_front = { -1/16, -8/16, -8/16, 1/16, -6/16, 1/16 },
connect_left = { -8/16, -8/16, -1/16, 1/16, -6/16, 1/16 },
connect_back = { -1/16, -8/16, -1/16, 1/16, -6/16, 8/16 },
connect_right = { -1/16, -8/16, -1/16, 8/16, -6/16, 1/16 },
disconnected_sides = {
{ -6/16, -8/16, -6/16, -4/16, -6/16, 6/16 },
{ 4/16, -8/16, -6/16, 6/16, -6/16, 6/16 },
{ -6/16, -8/16, -6/16, 6/16, -6/16, -4/16 },
{ -6/16, -8/16, 4/16, 6/16, -6/16, 6/16 }
},
},
connects_to = {
"homedecor:rope_light_on_floor_on",
"homedecor:rope_light_on_floor_off",
"group:mesecon_conductor_craftable"
},
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
groups = {cracky=3, oddly_breakable_by_hand=3, not_in_creative_inventory = nici_m},
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
sounds = default.node_sound_stone_defaults(),
drop = {
items = {
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
{items = {"homedecor:rope_light_on_floor_"..di} },
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
}
},
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
on_rightclick = on_rc,
Fix minetest warnings from homedecor_lighting ``` Undeclared global variable "mesecon" accessed at ...etest/mods/homedecor_modpack/homedecor_lighting/init.lua:852 Undeclared global variable "mesecon" accessed at ...etest/mods/homedecor_modpack/homedecor_lighting/init.lua:898 ```
2020-08-05 16:10:33 +02:00
mesecons = hd_mesecons and {
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
conductor = {
state = mesecon and (onflag and mesecon.state.on or mesecon.state.off),
onstate = "homedecor:rope_light_on_floor_on",
offstate = "homedecor:rope_light_on_floor_off",
simplify mesecons/digilines rules replaced all "xz" and "toponly" with "alldir" made on-floor rope lights use "alldir"
2019-06-04 07:37:02 +02:00
rules = rules_alldir
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
},
Fix minetest warnings from homedecor_lighting ``` Undeclared global variable "mesecon" accessed at ...etest/mods/homedecor_modpack/homedecor_lighting/init.lua:852 Undeclared global variable "mesecon" accessed at ...etest/mods/homedecor_modpack/homedecor_lighting/init.lua:898 ```
2020-08-05 16:10:33 +02:00
} or nil,
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
})
minetest.register_node(":homedecor:rope_light_on_ceiling_"..light_brightn_name, {
Update german locale
2020-10-09 06:57:41 +02:00
description = S("Rope lighting (on ceiling)"),
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
inventory_image = "homedecor_rope_light_on_ceiling.png",
paramtype = "light",
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
light_source = word_to_bright[light_brightn_name],
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
walkable = false,
sunlight_propagates = true,
tiles = { gen_ls_tex_white },
drawtype = "nodebox",
node_box = {
type = "connected",
fixed = {},
connect_front = { -1/16, 8/16, -8/16, 1/16, 6/16, 1/16 },
connect_left = { -8/16, 8/16, -1/16, 1/16, 6/16, 1/16 },
connect_back = { -1/16, 8/16, -1/16, 1/16, 6/16, 8/16 },
connect_right = { -1/16, 8/16, -1/16, 8/16, 6/16, 1/16 },
disconnected_sides = {
{ -6/16, 8/16, -6/16, -4/16, 6/16, 6/16 },
{ 4/16, 8/16, -6/16, 6/16, 6/16, 6/16 },
{ -6/16, 8/16, -6/16, 6/16, 6/16, -4/16 },
{ -6/16, 8/16, 4/16, 6/16, 6/16, 6/16 }
},
},
connects_to = {
"homedecor:rope_light_on_ceiling_on",
"homedecor:rope_light_on_ceiling_off",
"group:mesecon_conductor_craftable"
},
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
groups = {cracky=3, oddly_breakable_by_hand=3, not_in_creative_inventory = nici_m},
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
sounds = default.node_sound_stone_defaults(),
drop = {
items = {
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
{items = {"homedecor:rope_light_on_ceiling_"..di}},
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
}
},
fix groups on "floor" rope lights if mesecons, put "off" rope lights in creative inv, and drop them as "off" as well. else, put "on" in creative inv and drop "on" allow right-click on rope lights only if no mesecons also cache minetest.get_modpath("mesecons")
2019-06-15 12:23:12 +02:00
on_rightclick = on_rc,
Fix minetest warnings from homedecor_lighting ``` Undeclared global variable "mesecon" accessed at ...etest/mods/homedecor_modpack/homedecor_lighting/init.lua:852 Undeclared global variable "mesecon" accessed at ...etest/mods/homedecor_modpack/homedecor_lighting/init.lua:898 ```
2020-08-05 16:10:33 +02:00
mesecons = hd_mesecons and {
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
conductor = {
state = mesecon and (onflag and mesecon.state.on or mesecon.state.off),
onstate = "homedecor:rope_light_on_ceiling_on",
offstate = "homedecor:rope_light_on_ceiling_off",
rules = rules_alldir
},
Fix minetest warnings from homedecor_lighting ``` Undeclared global variable "mesecon" accessed at ...etest/mods/homedecor_modpack/homedecor_lighting/init.lua:852 Undeclared global variable "mesecon" accessed at ...etest/mods/homedecor_modpack/homedecor_lighting/init.lua:898 ```
2020-08-05 16:10:33 +02:00
} or nil,
rope lights are not dimmable
2019-06-02 09:13:46 +02:00
})
move "medieval" wall lamp and torch to homedecor_lighting make them mesecon/digiline controllable (on/off only, alldir rules) also fix a couple of old texture references
2019-06-02 08:35:20 +02:00
homedecor.register("wall_lamp_"..light_brightn_name, {
add "light" to a couple of descriptions, for easier searching
2019-06-06 10:38:13 +02:00
description = S("Wall Lamp/light"),
move "medieval" wall lamp and torch to homedecor_lighting make them mesecon/digiline controllable (on/off only, alldir rules) also fix a couple of old texture references
2019-06-02 08:35:20 +02:00
mesh = "homedecor_wall_lamp.obj",
tiles = {
{ name = "homedecor_generic_metal.png", color = homedecor.color_med_grey },
homedecor.lux_wood,
gen_ls_tex_yellow,
"homedecor_generic_metal_wrought_iron.png"
},
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "blend",
move "medieval" wall lamp and torch to homedecor_lighting make them mesecon/digiline controllable (on/off only, alldir rules) also fix a couple of old texture references
2019-06-02 08:35:20 +02:00
inventory_image = "homedecor_wall_lamp_inv.png",
groups = {snappy=3, not_in_creative_inventory = nici},
light_source = onflag and (default.LIGHT_MAX - 3) or nil,
selection_box = wl_cbox,
walkable = false,
drop = {
items = {
{items = {"homedecor:wall_lamp_on"}},
}
},
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
on_rightclick = homedecor_lighting.toggle_light,
mesecons = homedecor_lighting.mesecon_alldir_light,
digiline = homedecor_lighting.digiline_alldir_light,
move "medieval" wall lamp and torch to homedecor_lighting make them mesecon/digiline controllable (on/off only, alldir rules) also fix a couple of old texture references
2019-06-02 08:35:20 +02:00
on_punch = digiline_on_punch
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
end
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
-------------------------------------------------------
-- Light sources and other items that don't turn on/off
use mesh nodes for candles
2015-04-14 17:58:05 +02:00
fix global warnings
2019-05-26 03:43:13 +02:00
local tc_cbox = {
type = "fixed",
fixed = {
{ -0.1875, -0.5, -0.1875, 0.1875, 0.375, 0.1875 },
}
}
move most other homedecor nodes to the new registration function, remove any unnecessary fields due to minetest or homedecor defaults
2015-01-24 00:34:02 +01:00
homedecor.register("candle", {
Better candles descriptions Better candles descriptions
2014-09-23 14:20:34 +02:00
description = S("Thick Candle"),
use mesh nodes for candles
2015-04-14 17:58:05 +02:00
mesh = "homedecor_candle_thick.obj",
Add candles and oil lamp
2014-07-27 17:52:42 +02:00
tiles = {
use mesh nodes for candles
2015-04-14 17:58:05 +02:00
'homedecor_candle_sides.png',
{name="homedecor_candle_flame.png", animation={type="vertical_frames", aspect_w=16, aspect_h=16, length=3.0}},
whitespace cleanup, now also making most of homedecor consistenly use the same indentation style
2015-01-23 22:14:00 +01:00
},
Better invo images for candles
2015-04-17 12:38:21 +02:00
inventory_image = "homedecor_candle_inv.png",
use mesh nodes for candles
2015-04-14 17:58:05 +02:00
selection_box = tc_cbox,
Cleaning and tweaking node params
2015-04-29 14:14:36 +02:00
walkable = false,
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "clip",
Add candles and oil lamp
2014-07-27 17:52:42 +02:00
groups = { snappy = 3 },
Replace LIGHT_MAX with default.LIGHT_MAX
2015-08-01 15:08:48 +02:00
light_source = default.LIGHT_MAX-4,
Add candles and oil lamp
2014-07-27 17:52:42 +02:00
})
use mesh nodes for candles
2015-04-14 17:58:05 +02:00
local c_cbox = {
type = "fixed",
fixed = {
add brass and wrought-iron candlesticks
2015-04-22 07:24:43 +02:00
{ -0.125, -0.5, -0.125, 0.125, 0.05, 0.125 },
use mesh nodes for candles
2015-04-14 17:58:05 +02:00
}
}
move most other homedecor nodes to the new registration function, remove any unnecessary fields due to minetest or homedecor defaults
2015-01-24 00:34:02 +01:00
homedecor.register("candle_thin", {
add brass and wrought-iron candlesticks
2015-04-22 07:24:43 +02:00
description = S("Thin Candle"),
use mesh nodes for candles
2015-04-14 17:58:05 +02:00
mesh = "homedecor_candle_thin.obj",
Add thin candle, repurpose "thick" candle recipe for it add new recipe for thick candle
2014-09-22 08:40:03 +02:00
tiles = {
use mesh nodes for candles
2015-04-14 17:58:05 +02:00
'homedecor_candle_sides.png',
{name="homedecor_candle_flame.png", animation={type="vertical_frames", aspect_w=16, aspect_h=16, length=3.0}},
whitespace cleanup, now also making most of homedecor consistenly use the same indentation style
2015-01-23 22:14:00 +01:00
},
Better invo images for candles
2015-04-17 12:38:21 +02:00
inventory_image = "homedecor_candle_thin_inv.png",
use mesh nodes for candles
2015-04-14 17:58:05 +02:00
selection_box = c_cbox,
Update thin/little candle
2014-10-17 16:09:37 +02:00
walkable = false,
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "clip",
Add thin candle, repurpose "thick" candle recipe for it add new recipe for thick candle
2014-09-22 08:40:03 +02:00
groups = { snappy = 3 },
Replace LIGHT_MAX with default.LIGHT_MAX
2015-08-01 15:08:48 +02:00
light_source = default.LIGHT_MAX-4,
Add thin candle, repurpose "thick" candle recipe for it add new recipe for thick candle
2014-09-22 08:40:03 +02:00
})
add brass and wrought-iron candlesticks
2015-04-22 07:24:43 +02:00
local cs_cbox = {
type = "fixed",
fixed = {
{ -0.15625, -0.5, -0.15625, 0.15625, 0.3125, 0.15625 },
}
}
homedecor.register("candlestick_wrought_iron", {
description = S("Candlestick (wrought iron)"),
mesh = "homedecor_candlestick.obj",
tiles = {
"homedecor_candle_sides.png",
{name="homedecor_candle_flame.png", animation={type="vertical_frames", aspect_w=16, aspect_h=16, length=3.0}},
rename most wood, metal, etc textures to bring them all together into one "category" instead of being scattered across the directory also combine a couple dupes.
2015-04-28 05:48:02 +02:00
"homedecor_generic_metal_wrought_iron.png",
add brass and wrought-iron candlesticks
2015-04-22 07:24:43 +02:00
},
inventory_image = "homedecor_candlestick_wrought_iron_inv.png",
selection_box = cs_cbox,
walkable = false,
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "clip",
add brass and wrought-iron candlesticks
2015-04-22 07:24:43 +02:00
groups = { snappy = 3 },
Replace LIGHT_MAX with default.LIGHT_MAX
2015-08-01 15:08:48 +02:00
light_source = default.LIGHT_MAX-4,
add brass and wrought-iron candlesticks
2015-04-22 07:24:43 +02:00
})
homedecor.register("candlestick_brass", {
description = S("Candlestick (brass)"),
mesh = "homedecor_candlestick.obj",
tiles = {
"homedecor_candle_sides.png",
{name="homedecor_candle_flame.png", animation={type="vertical_frames", aspect_w=16, aspect_h=16, length=3.0}},
rename most wood, metal, etc textures to bring them all together into one "category" instead of being scattered across the directory also combine a couple dupes.
2015-04-28 05:48:02 +02:00
"homedecor_generic_metal_brass.png",
add brass and wrought-iron candlesticks
2015-04-22 07:24:43 +02:00
},
inventory_image = "homedecor_candlestick_brass_inv.png",
selection_box = cs_cbox,
walkable = false,
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "clip",
add brass and wrought-iron candlesticks
2015-04-22 07:24:43 +02:00
groups = { snappy = 3 },
Replace LIGHT_MAX with default.LIGHT_MAX
2015-08-01 15:08:48 +02:00
light_source = default.LIGHT_MAX-4,
add brass and wrought-iron candlesticks
2015-04-22 07:24:43 +02:00
})
add wall sconce
2015-04-14 19:42:22 +02:00
homedecor.register("wall_sconce", {
description = S("Wall sconce"),
mesh = "homedecor_wall_sconce.obj",
tiles = {
'homedecor_candle_sides.png',
{name="homedecor_candle_flame.png", animation={type="vertical_frames", aspect_w=16, aspect_h=16, length=3.0}},
'homedecor_wall_sconce_back.png',
rename most wood, metal, etc textures to bring them all together into one "category" instead of being scattered across the directory also combine a couple dupes.
2015-04-28 05:48:02 +02:00
'homedecor_generic_metal_wrought_iron.png',
add wall sconce
2015-04-14 19:42:22 +02:00
},
inventory_image = "homedecor_wall_sconce_inv.png",
selection_box = {
type = "fixed",
fixed = { -0.1875, -0.25, 0.3125, 0.1875, 0.25, 0.5 }
},
walkable = false,
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "clip",
add wall sconce
2015-04-14 19:42:22 +02:00
groups = { snappy = 3 },
Replace LIGHT_MAX with default.LIGHT_MAX
2015-08-01 15:08:48 +02:00
light_source = default.LIGHT_MAX-4,
add wall sconce
2015-04-14 19:42:22 +02:00
})
fix collision box on oil lamp
2015-04-17 12:11:05 +02:00
local ol_cbox = {
type = "fixed",
fixed = {
{ -5/16, -8/16, -3/16, 5/16, 4/16, 3/16 },
}
}
move most other homedecor nodes to the new registration function, remove any unnecessary fields due to minetest or homedecor defaults
2015-01-24 00:34:02 +01:00
homedecor.register("oil_lamp", {
Make sure all "lanterns" and "lamps" have "light" in their descriptions also (for easier searching in sfinv and unified inv)
2019-05-03 00:36:36 +02:00
description = S("Oil lamp/Light (hurricane)"),
use mesh node for oil lamp also turn the light level up one step
2015-04-17 08:43:00 +02:00
mesh = "homedecor_oil_lamp.obj",
tiles = {
rename most wood, metal, etc textures to bring them all together into one "category" instead of being scattered across the directory also combine a couple dupes.
2015-04-28 05:48:02 +02:00
"homedecor_generic_metal_brass.png",
Use texture colorization where possible Uses "color = <foo>" in the tile image def instead of compositing with ^[colorize or ^[brighten. Saves RAM.
2017-01-25 10:22:28 +01:00
{ name = "homedecor_generic_metal.png", color = homedecor.color_black },
{ name = "homedecor_generic_metal.png", color = 0xffa00000 },
rework oil lamp to make the wick in the center visible
2015-05-09 05:15:52 +02:00
"homedecor_oil_lamp_wick.png",
Use texture colorization where possible Uses "color = <foo>" in the tile image def instead of compositing with ^[colorize or ^[brighten. Saves RAM.
2017-01-25 10:22:28 +01:00
{ name = "homedecor_generic_metal.png", color = 0xffa00000 },
rework oil lamp to make the wick in the center visible
2015-05-09 05:15:52 +02:00
"homedecor_oil_lamp_glass.png",
use mesh node for oil lamp also turn the light level up one step
2015-04-17 08:43:00 +02:00
},
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "blend",
use mesh node for oil lamp also turn the light level up one step
2015-04-17 08:43:00 +02:00
inventory_image = "homedecor_oil_lamp_inv.png",
fix collision box on oil lamp
2015-04-17 12:11:05 +02:00
selection_box = ol_cbox,
Cleaning and tweaking node params
2015-04-29 14:14:36 +02:00
walkable = false,
Add candles and oil lamp
2014-07-27 17:52:42 +02:00
groups = { snappy = 3 },
Replace LIGHT_MAX with default.LIGHT_MAX
2015-08-01 15:08:48 +02:00
light_source = default.LIGHT_MAX-3,
Better invo images for candles
2015-04-17 12:38:21 +02:00
sounds = default.node_sound_glass_defaults(),
Add candles and oil lamp
2014-07-27 17:52:42 +02:00
})
Add tabletop-style oil lamp
2015-04-28 17:58:47 +02:00
homedecor.register("oil_lamp_tabletop", {
Make sure all "lanterns" and "lamps" have "light" in their descriptions also (for easier searching in sfinv and unified inv)
2019-05-03 00:36:36 +02:00
description = S("Oil Lamp/Light (tabletop)"),
Add tabletop-style oil lamp
2015-04-28 17:58:47 +02:00
mesh = "homedecor_oil_lamp_tabletop.obj",
tiles = {"homedecor_oil_lamp_tabletop.png"},
inventory_image = "homedecor_oil_lamp_tabletop_inv.png",
fix sel/coll box on lamp
2015-04-28 18:31:03 +02:00
selection_box = ol_cbox,
collision_box = ol_cbox,
Add tabletop-style oil lamp
2015-04-28 17:58:47 +02:00
groups = { snappy = 3 },
Replace LIGHT_MAX with default.LIGHT_MAX
2015-08-01 15:08:48 +02:00
light_source = default.LIGHT_MAX-3,
Add tabletop-style oil lamp
2015-04-28 17:58:47 +02:00
sounds = default.node_sound_glass_defaults(),
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
local topchains_sbox = {
Opti. code
2015-02-28 10:14:46 +01:00
type = "fixed",
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
fixed = {
{ -0.25, 0.35, -0.25, 0.25, 0.5, 0.25 },
{ -0.1, -0.5, -0.1, 0.1, 0.4, 0.1 }
}
Opti. code
2015-02-28 10:14:46 +01:00
}
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
minetest.register_node(":homedecor:chain_steel_top", {
description = S("Hanging chain (ceiling mount, steel)"),
drawtype = "mesh",
mesh = "homedecor_chains_top.obj",
tiles = {"basic_materials_chain_steel.png"},
walkable = false,
climbable = true,
sunlight_propagates = true,
paramtype = "light",
inventory_image = "basic_materials_chain_steel_inv.png",
groups = {cracky=3},
selection_box = topchains_sbox,
Add wall lantern
2014-10-16 09:22:58 +02:00
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
minetest.register_node(":homedecor:chain_brass_top", {
description = S("Hanging chain (ceiling mount, brass)"),
Add Ceiling Lantern
2015-03-29 13:34:56 +02:00
drawtype = "mesh",
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
mesh = "homedecor_chains_top.obj",
tiles = {"basic_materials_chain_brass.png"},
walkable = false,
climbable = true,
sunlight_propagates = true,
paramtype = "light",
inventory_image = "basic_materials_chain_brass_inv.png",
groups = {cracky=3},
selection_box = topchains_sbox,
Add Ceiling Lantern
2015-03-29 13:34:56 +02:00
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
minetest.register_node(":homedecor:chandelier_steel", {
description = S("Chandelier (steel)"),
paramtype = "light",
light_source = 12,
walkable = false,
climbable = true,
sunlight_propagates = true,
add wooden lattice lamps
2014-07-27 21:15:47 +02:00
tiles = {
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
"basic_materials_chain_steel.png",
"homedecor_candle_flat.png",
{
name="homedecor_candle_flame.png",
animation={
type="vertical_frames",
aspect_w=16,
aspect_h=16,
length=3.0
}
}
whitespace cleanup, now also making most of homedecor consistenly use the same indentation style
2015-01-23 22:14:00 +01:00
},
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
drawtype = "mesh",
mesh = "homedecor_chandelier.obj",
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "clip",
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
groups = {cracky=3},
sounds = default.node_sound_stone_defaults(),
add wooden lattice lamps
2014-07-27 21:15:47 +02:00
})
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
minetest.register_node(":homedecor:chandelier_brass", {
description = S("Chandelier (brass)"),
paramtype = "light",
light_source = 12,
walkable = false,
climbable = true,
sunlight_propagates = true,
tiles = {
"basic_materials_chain_brass.png",
"homedecor_candle_flat.png",
{
name="homedecor_candle_flame.png",
animation={
type="vertical_frames",
aspect_w=16,
aspect_h=16,
length=3.0
}
}
},
drawtype = "mesh",
mesh = "homedecor_chandelier.obj",
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "clip",
Allow most light sources to be toggled on/off with right-click. Rework glowlight slab and cube textures, simplify, use overlays and compositing, so that the bulk of the light can switch between a dark, matte surface, and a bright surface with central glare gradient, and so that the surface and eging respond to param2 color. Tweak all other relevant nodes so that their light source changes to a darkened (or even translucent texture) when off. On/off switching doesn't affect things like oil lamps, candles, chandeliers, etc. Just basically the stuff that would be electric-powered in real life. If in a protected area, only that area's owner can turn the light on/off.
2019-05-26 01:35:14 +02:00
groups = {cracky=3},
sounds = default.node_sound_stone_defaults(),
})
convert desk lamps to param2 colorization
2017-02-01 01:01:47 +01:00
move "medieval" wall lamp and torch to homedecor_lighting make them mesecon/digiline controllable (on/off only, alldir rules) also fix a couple of old texture references
2019-06-02 08:35:20 +02:00
homedecor.register("torch_wall", {
description = S("Wall Torch"),
mesh = "forniture_torch.obj",
tiles = {
{
name="forniture_torch_flame.png",
animation={
type="vertical_frames",
aspect_w=40,
aspect_h=40,
length=1.0,
},
},
{ name = "homedecor_generic_metal.png", color = homedecor.color_black },
{ name = "homedecor_generic_metal.png", color = homedecor.color_med_grey },
"forniture_coal.png",
},
inventory_image="forniture_torch_inv.png",
walkable = false,
light_source = 14,
selection_box = {
type = "fixed",
fixed = { -0.15, -0.45, 0.15, 0.15,0.35, 0.5 },
},
fix almost all warning spam (#26)
2022-03-29 07:44:05 +02:00
use_texture_alpha = "clip",
move "medieval" wall lamp and torch to homedecor_lighting make them mesecon/digiline controllable (on/off only, alldir rules) also fix a couple of old texture references
2019-06-02 08:35:20 +02:00
groups = {cracky=3},
})
convert desk lamps to param2 colorization
2017-02-01 01:01:47 +01:00
-- table lamps and standing lamps
rework meshes for table and standing lamps, better use of materials use default wool for the lamp shades also, use ^[colorize to brighten the lampshades and lightbulbs according to the lamp's light/brightness setting, instead of baking it into the textures.
2015-04-14 21:34:17 +02:00
local lamp_colors = {
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
"white",
"blue",
"green",
"pink",
"red",
"violet",
rework meshes for table and standing lamps, better use of materials use default wool for the lamp shades also, use ^[colorize to brighten the lampshades and lightbulbs according to the lamp's light/brightness setting, instead of baking it into the textures.
2015-04-14 21:34:17 +02:00
}
move "3dforniture" lamps to lighting.lua
2014-09-30 16:40:36 +02:00
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
-- conversion LBM for param2 coloring
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
homedecor_lighting.old_static_nodes = {
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
"homedecor:glowlight_quarter_white",
"homedecor:glowlight_quarter_yellow",
"homedecor:glowlight_half_white",
"homedecor:glowlight_half_yellow",
"homedecor:glowlight_small_cube_white",
"homedecor:glowlight_small_cube_yellow"
}
local lamp_power = {"off", "low", "med", "hi", "max"}
for _, power in ipairs(lamp_power) do
for _, color in ipairs(lamp_colors) do
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
table.insert(homedecor_lighting.old_static_nodes, "homedecor:table_lamp_"..color.."_"..power)
table.insert(homedecor_lighting.old_static_nodes, "homedecor:standing_lamp_"..color.."_"..power)
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
end
end
minetest.register_lbm({
Split the big "homedecor" mod into multiple sub-mods Any of these new submods can be run without any other components that were once part of the big "homedecor" mod, other than homedecor_common and homedecor_i18n Reduced dependencies where possible, but each submod still has its various dependencies more or less the same as before, i.e. some need basic_materials, others need unifieddyes, some need building_blocks, and so on. All of the stuff that used to be under homedecor/handlers got moved to homedecor_common, as did any models and/or textures that are used by more than one other homedecor component. All the miscellaneous items that didn't warrant their own mod ended up in homedecor_misc, which can also be thought of as the remains of the original "homedecor" mod, renamed.
2019-04-20 21:49:36 +02:00
name = ":homedecor:convert_lighting",
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
label = "Convert homedecor glowlights, table lamps, and standing lamps to use param2 color",
don't run LBM at every load
2017-02-16 22:58:48 +01:00
run_at_every_load = false,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
nodenames = homedecor_lighting.old_static_nodes,
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
action = function(pos, node)
local name = node.name
fix missing 6dfacedir -> wallmounted in LBM code for glowlights
2017-01-29 09:31:02 +01:00
local newname
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
local color
if string.find(name, "small_cube") then
newname = "homedecor:glowlight_small_cube"
elseif string.find(name, "glowlight_half") then
newname = "homedecor:glowlight_half"
elseif string.find(name, "glowlight_quarter") then
newname = "homedecor:glowlight_quarter"
end
local lampname
Fix warnings issued by `luacheck`.
2017-02-16 03:53:52 +01:00
if string.find(name, "standing_lamp") then
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
lampname = "homedecor:standing_lamp"
elseif string.find(name, "table_lamp") then
lampname = "homedecor:table_lamp"
end
if lampname then
newname = lampname
if string.find(name, "_off") then
newname = newname.."_off"
elseif string.find(name, "_low") then
newname = newname.."_low"
elseif string.find(name, "_med") then
newname = newname.."_med"
elseif string.find(name, "_hi") then
newname = newname.."_hi"
elseif string.find(name, "_max") then
newname = newname.."_max"
end
end
if string.find(name, "red") then
color = "red"
elseif string.find(name, "pink") then
color = "pink"
elseif string.find(name, "green") then
color = "green"
elseif string.find(name, "blue") then
color = "blue"
elseif string.find(name, "yellow") then
color = "yellow"
elseif string.find(name, "violet") then
color = "violet"
else
color = "white"
end
do the same for the old static->param2 LBM
2017-02-25 03:27:22 +01:00
local paletteidx, _ = unifieddyes.getpaletteidx("unifieddyes:"..color, "extended")
fix missing 6dfacedir -> wallmounted in LBM code for glowlights
2017-01-29 09:31:02 +01:00
local old_fdir
local new_node = newname
fix crash
2017-02-01 17:51:12 +01:00
local new_fdir = 1
remove debug prints localized a misc. variable
2017-01-29 10:34:26 +01:00
local param2
fix missing 6dfacedir -> wallmounted in LBM code for glowlights
2017-01-29 09:31:02 +01:00
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
if string.find(name, "glowlight") then
paletteidx, _ = unifieddyes.getpaletteidx("unifieddyes:"..color, "wallmounted")
fix missing 6dfacedir -> wallmounted in LBM code for glowlights
2017-01-29 09:31:02 +01:00
old_fdir = math.floor(node.param2 / 4)
if old_fdir == 5 then
new_fdir = 0
elseif old_fdir == 1 then
new_fdir = 5
elseif old_fdir == 2 then
new_fdir = 4
elseif old_fdir == 3 then
new_fdir = 3
elseif old_fdir == 4 then
new_fdir = 2
elseif old_fdir == 0 then
new_fdir = 1
end
param2 = paletteidx + new_fdir
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
else
param2 = paletteidx
end
lighting: actually get meta before trying to use it :)
2017-02-27 23:02:20 +01:00
local meta = minetest.get_meta(pos)
set meta "ext" flag when converting old nodes
2017-02-25 07:02:51 +01:00
if string.find(name, "table_lamp") or string.find(name, "standing_lamp") then
meta:set_string("palette", "ext")
end
fix missing 6dfacedir -> wallmounted in LBM code for glowlights
2017-01-29 09:31:02 +01:00
minetest.set_node(pos, { name = new_node, param2 = param2 })
convert glowlights, table lamps, and standing lamps to use param2-base coloring. Reworked crafting as needed to account for the node names.
2017-01-29 06:58:31 +01:00
meta:set_string("dye", "unifieddyes:"..color)
end
})
convert desk lamps to param2 colorization
2017-02-01 01:01:47 +01:00
-- this one's for the small "gooseneck" desk lamps
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
homedecor_lighting.old_static_desk_lamps = {
convert desk lamps to param2 colorization
2017-02-01 01:01:47 +01:00
"homedecor:desk_lamp_red",
"homedecor:desk_lamp_blue",
"homedecor:desk_lamp_green",
"homedecor:desk_lamp_violet",
}
minetest.register_lbm({
Split the big "homedecor" mod into multiple sub-mods Any of these new submods can be run without any other components that were once part of the big "homedecor" mod, other than homedecor_common and homedecor_i18n Reduced dependencies where possible, but each submod still has its various dependencies more or less the same as before, i.e. some need basic_materials, others need unifieddyes, some need building_blocks, and so on. All of the stuff that used to be under homedecor/handlers got moved to homedecor_common, as did any models and/or textures that are used by more than one other homedecor component. All the miscellaneous items that didn't warrant their own mod ended up in homedecor_misc, which can also be thought of as the remains of the original "homedecor" mod, renamed.
2019-04-20 21:49:36 +02:00
name = ":homedecor:convert_desk_lamps",
rename and re-decribe desk lamp LBM
2017-02-01 14:50:03 +01:00
label = "Convert homedecor desk lamps to use param2 color",
don't run LBM at every load
2017-02-16 22:58:48 +01:00
run_at_every_load = false,
MT5 translation for homedecor_lighting - Add screwdriver to optional_depends - Fix luacheck warnings (mostly removing unused/legacy stuff) Note: sm_light used to be a light_source value for lattice small lantern, but when this was changed, only half of the lines were deleted (including the declaration). The other half has been preserved because it was part of an if-arm that "seems" unrelated (but it only seems). - Improve french translation
2020-08-04 23:50:14 +02:00
nodenames = homedecor_lighting.old_static_desk_lamps,
convert desk lamps to param2 colorization
2017-02-01 01:01:47 +01:00
action = function(pos, node)
local name = node.name
local color = string.sub(name, string.find(name, "_", -8) + 1)
if color == "green" then
color = "medium_green"
elseif color == "violet" then
color = "magenta"
end
local paletteidx, _ = unifieddyes.getpaletteidx("unifieddyes:"..color, "wallmounted")
local old_fdir = math.floor(node.param2 % 32)
local new_fdir = 3
if old_fdir == 0 then
new_fdir = 3
elseif old_fdir == 1 then
new_fdir = 4
elseif old_fdir == 2 then
new_fdir = 2
elseif old_fdir == 3 then
new_fdir = 5
end
local param2 = paletteidx + new_fdir
minetest.set_node(pos, { name = "homedecor:desk_lamp", param2 = param2 })
local meta = minetest.get_meta(pos)
meta:set_string("dye", "unifieddyes:"..color)
end
})
use basic_materials mod where possible
2018-10-31 01:46:10 +01:00
Add "rope" lighting
2019-05-25 08:34:50 +02:00
Split the big "homedecor" mod into multiple sub-mods Any of these new submods can be run without any other components that were once part of the big "homedecor" mod, other than homedecor_common and homedecor_i18n Reduced dependencies where possible, but each submod still has its various dependencies more or less the same as before, i.e. some need basic_materials, others need unifieddyes, some need building_blocks, and so on. All of the stuff that used to be under homedecor/handlers got moved to homedecor_common, as did any models and/or textures that are used by more than one other homedecor component. All the miscellaneous items that didn't warrant their own mod ended up in homedecor_misc, which can also be thought of as the remains of the original "homedecor" mod, renamed.
2019-04-20 21:49:36 +02:00
-- crafting
use basic_materials mod where possible
2018-10-31 01:46:10 +01:00
minetest.register_craft({
output = 'homedecor:chain_steel_top',
recipe = {
{'default:steel_ingot'},
{'basic_materials:chainlink_steel'},
},
})
minetest.register_craft({
output = 'homedecor:chandelier_steel',
recipe = {
{'', 'basic_materials:chainlink_steel', ''},
{'default:torch', 'basic_materials:chainlink_steel', 'default:torch'},
{'default:steel_ingot', 'default:steel_ingot', 'default:steel_ingot'},
}
})
-- brass versions
minetest.register_craft({
output = 'homedecor:chain_brass_top',
recipe = {
{'basic_materials:brass_ingot'},
{'basic_materials:chainlink_brass'},
},
})
minetest.register_craft({
output = 'homedecor:chandelier_brass',
recipe = {
{'', 'basic_materials:chainlink_brass', ''},
{'default:torch', 'basic_materials:chainlink_brass', 'default:torch'},
{'basic_materials:brass_ingot', 'basic_materials:brass_ingot', 'basic_materials:brass_ingot'},
}
})
Split the big "homedecor" mod into multiple sub-mods Any of these new submods can be run without any other components that were once part of the big "homedecor" mod, other than homedecor_common and homedecor_i18n Reduced dependencies where possible, but each submod still has its various dependencies more or less the same as before, i.e. some need basic_materials, others need unifieddyes, some need building_blocks, and so on. All of the stuff that used to be under homedecor/handlers got moved to homedecor_common, as did any models and/or textures that are used by more than one other homedecor component. All the miscellaneous items that didn't warrant their own mod ended up in homedecor_misc, which can also be thought of as the remains of the original "homedecor" mod, renamed.
2019-04-20 21:49:36 +02:00
-- candles
minetest.register_craft({
output = "homedecor:candle_thin 4",
recipe = {
{"farming:string" },
{"basic_materials:paraffin" }
}
})
minetest.register_craft({
output = "homedecor:candle 2",
recipe = {
{"farming:string" },
{"basic_materials:paraffin" },
{"basic_materials:paraffin" }
}
})
minetest.register_craft({
output = "homedecor:wall_sconce 2",
recipe = {
{"default:iron_lump", "", ""},
{"default:iron_lump", "homedecor:candle", ""},
{"default:iron_lump", "", ""},
}
})
minetest.register_craft({
output = "homedecor:candlestick_wrought_iron",
recipe = {
{""},
{"homedecor:candle_thin"},
{"default:iron_lump"},
}
})
minetest.register_craft({
output = "homedecor:candlestick_brass",
recipe = {
{""},
{"homedecor:candle_thin"},
{"basic_materials:brass_ingot"},
}
})
minetest.register_craft({
output = "homedecor:oil_lamp",
recipe = {
{ "", "vessels:glass_bottle", "" },
{ "", "farming:string", "" },
{ "default:steel_ingot", "basic_materials:oil_extract", "default:steel_ingot" }
}
})
minetest.register_craft({
output = "homedecor:oil_lamp_tabletop",
recipe = {
{ "", "vessels:glass_bottle", "" },
{ "", "farming:string", "" },
{ "default:iron_lump", "basic_materials:oil_extract", "default:iron_lump" }
}
})
-- Wrought-iron wall latern
minetest.register_craft({
output = "homedecor:ground_lantern",
recipe = {
{ "default:iron_lump", "default:iron_lump", "default:iron_lump" },
{ "default:iron_lump", "default:torch", "default:iron_lump" },
{ "", "default:iron_lump", "" }
}
})
-- wood-lattice lamps
if minetest.get_modpath("darkage") then
minetest.register_craft( {
output = "homedecor:lattice_lantern_small 8",
recipe = {
{ "darkage:lamp" },
},
})
minetest.register_craft( {
output = "darkage:lamp",
type = "shapeless",
recipe = {
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
},
})
else
minetest.register_craft( {
output = "homedecor:lattice_lantern_large 2",
recipe = {
{ "dye:black", "dye:yellow", "dye:black" },
{ "group:stick", "building_blocks:woodglass", "group:stick" },
{ "group:stick", "basic_materials:energy_crystal_simple", "group:stick" }
},
})
minetest.register_craft( {
output = "homedecor:lattice_lantern_small 8",
recipe = {
{ "homedecor:lattice_lantern_large" },
},
})
minetest.register_craft( {
output = "homedecor:lattice_lantern_large",
type = "shapeless",
recipe = {
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
"homedecor:lattice_lantern_small",
},
})
end
-- glowlights
minetest.register_craft({
output = "homedecor:glowlight_half 6",
recipe = {
{ "default:glass", "basic_materials:energy_crystal_simple", "default:glass", },
}
})
minetest.register_craft({
output = "homedecor:glowlight_half 6",
recipe = {
{"moreblocks:super_glow_glass", "moreblocks:glow_glass", "moreblocks:super_glow_glass", },
}
})
minetest.register_craft({
output = "homedecor:glowlight_half",
recipe = {
{"homedecor:glowlight_small_cube","homedecor:glowlight_small_cube"},
{"homedecor:glowlight_small_cube","homedecor:glowlight_small_cube"}
}
})
minetest.register_craft({
output = "homedecor:glowlight_half",
type = "shapeless",
recipe = {
"homedecor:glowlight_quarter",
"homedecor:glowlight_quarter"
}
})
unifieddyes.register_color_craft({
output = "homedecor:glowlight_half",
palette = "wallmounted",
type = "shapeless",
neutral_node = "homedecor:glowlight_half",
recipe = {
"NEUTRAL_NODE",
"MAIN_DYE"
}
})
minetest.register_craft({
output = "homedecor:glowlight_quarter 6",
recipe = {
{"homedecor:glowlight_half", "homedecor:glowlight_half", "homedecor:glowlight_half", },
}
})
unifieddyes.register_color_craft({
output = "homedecor:glowlight_quarter",
palette = "wallmounted",
type = "shapeless",
neutral_node = "homedecor:glowlight_quarter",
recipe = {
"NEUTRAL_NODE",
"MAIN_DYE"
}
})
minetest.register_craft({
output = "homedecor:glowlight_small_cube 8",
recipe = {
{ "dye:white" },
{ "default:glass" },
{ "basic_materials:energy_crystal_simple" },
}
})
minetest.register_craft({
output = "homedecor:glowlight_small_cube 8",
recipe = {
{"dye:white" },
{"moreblocks:super_glow_glass" },
}
})
minetest.register_craft({
output = "homedecor:glowlight_small_cube 4",
recipe = {
{"homedecor:glowlight_half" },
}
})
unifieddyes.register_color_craft({
output = "homedecor:glowlight_small_cube",
palette = "wallmounted",
type = "shapeless",
neutral_node = "homedecor:glowlight_small_cube",
recipe = {
"NEUTRAL_NODE",
"MAIN_DYE"
}
})
----
minetest.register_craft({
output = "homedecor:plasma_lamp",
recipe = {
{"", "default:glass", ""},
{"default:glass", "basic_materials:energy_crystal_simple", "default:glass"},
{"", "default:glass", ""}
}
})
minetest.register_craft({
output = "homedecor:plasma_ball 2",
recipe = {
{"", "default:glass", ""},
{"default:glass", "default:copper_ingot", "default:glass"},
{"basic_materials:plastic_sheet", "basic_materials:energy_crystal_simple", "basic_materials:plastic_sheet"}
}
})
minetest.register_craft({
output = "homedecor:desk_lamp 2",
recipe = {
{ "", "default:steel_ingot", "homedecor:glowlight_small_cube" },
{ "", "basic_materials:steel_strip", "" },
{ "basic_materials:plastic_sheet", "basic_materials:copper_wire", "basic_materials:plastic_sheet" },
},
})
unifieddyes.register_color_craft({
output = "homedecor:desk_lamp",
palette = "wallmounted",
type = "shapeless",
neutral_node = "homedecor:desk_lamp",
recipe = {
"NEUTRAL_NODE",
"MAIN_DYE"
}
})
minetest.register_craft({
output = "homedecor:hanging_lantern 2",
recipe = {
{ "default:iron_lump", "default:iron_lump", "" },
{ "default:iron_lump", "homedecor:lattice_lantern_large", "" },
{ "default:iron_lump", "", "" },
},
})
minetest.register_craft({
output = "homedecor:ceiling_lantern 2",
recipe = {
{ "default:iron_lump", "default:iron_lump", "default:iron_lump" },
{ "default:iron_lump", "homedecor:lattice_lantern_large", "default:iron_lump" },
{ "", "default:iron_lump", "" },
},
})
minetest.register_craft({
output = "homedecor:wall_lamp 2",
recipe = {
{ "", "homedecor:lattice_lantern_large", "" },
{ "default:iron_lump", "group:stick", "" },
{ "default:iron_lump", "group:stick", "" },
},
})
minetest.register_craft({
output = "homedecor:ceiling_lamp",
recipe = {
{ "", "basic_materials:brass_ingot", ""},
{ "", "basic_materials:chainlink_brass", ""},
{ "default:glass", "homedecor:glowlight_small_cube", "default:glass"}
},
})
minetest.register_craft({
output = "homedecor:ceiling_lamp",
recipe = {
{ "", "basic_materials:chain_steel_top_brass", ""},
{ "default:glass", "homedecor:glowlight_small_cube", "default:glass"}
},
})
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
minetest.register_craft({
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
output = "homedecor:standing_lamp_hi",
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
recipe = {
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
{"homedecor:table_lamp_hi"},
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
{"group:stick"},
{"group:stick"},
},
})
unifieddyes.register_color_craft({
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
output = "homedecor:standing_lamp_hi",
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
palette = "extended",
type = "shapeless",
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
neutral_node = "homedecor:standing_lamp_hi",
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
recipe = {
"NEUTRAL_NODE",
"MAIN_DYE"
}
})
minetest.register_craft({
type = "fuel",
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
recipe = "homedecor:table_lamp_hi",
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
burntime = 10,
})
minetest.register_craft({
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
output = "homedecor:table_lamp_hi",
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
recipe = {
{ "wool:white", "default:torch", "wool:white"},
{ "", "group:stick", ""},
{ "", "stairs:slab_wood", "" },
},
})
minetest.register_craft({
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
output = "homedecor:table_lamp_hi",
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
recipe = {
{ "cottages:wool", "default:torch", "cottages:wool"},
{ "", "group:stick", ""},
{ "", "stairs:slab_wood", "" },
},
})
minetest.register_craft({
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
output = "homedecor:table_lamp_hi",
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
recipe = {
{ "wool:white", "default:torch", "wool:white"},
{ "", "group:stick", ""},
{ "", "moreblocks:slab_wood", "" },
},
})
minetest.register_craft({
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
output = "homedecor:table_lamp_hi",
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
recipe = {
{ "cottages:wool", "default:torch", "cottages:wool"},
{ "", "group:stick", ""},
{ "", "moreblocks:slab_wood", "" },
},
})
unifieddyes.register_color_craft({
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
output = "homedecor:table_lamp_hi",
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
palette = "extended",
type = "shapeless",
make table- and standing-lamps return "hi" brightness version, instead of "off". do the same for their crafts.
2019-05-26 02:59:19 +02:00
neutral_node = "homedecor:table_lamp_hi",
Multiple related changes: remove duplicate dishwasher recipe more kitchen depends fixes fix wrong brass taps recipe (ref technic brass, need basic_materials brass) re-add missing bathroom items recipes re-add missing stading- and table-lamp recipes add alternate dishwasher recipe add recipes for "half-doors" change light bath tiles recipe (don't need white dye for base node, now) move japanese wall parts to homedecor_misc, make _doors opt depend on that
2019-05-25 01:08:13 +02:00
recipe = {
"NEUTRAL_NODE",
"MAIN_DYE"
}
})
remove unused recipes from furniture mod some deleted altogether as redundant, others moved to the proper mods.
2021-03-27 04:21:37 +01:00
minetest.register_craft({
output = "homedecor:torch_wall 10",
recipe = {
{ "default:coal_lump" },
{ "default:steel_ingot" },
},
})
Split the big "homedecor" mod into multiple sub-mods Any of these new submods can be run without any other components that were once part of the big "homedecor" mod, other than homedecor_common and homedecor_i18n Reduced dependencies where possible, but each submod still has its various dependencies more or less the same as before, i.e. some need basic_materials, others need unifieddyes, some need building_blocks, and so on. All of the stuff that used to be under homedecor/handlers got moved to homedecor_common, as did any models and/or textures that are used by more than one other homedecor component. All the miscellaneous items that didn't warrant their own mod ended up in homedecor_misc, which can also be thought of as the remains of the original "homedecor" mod, renamed.
2019-04-20 21:49:36 +02:00
-- aliases
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
minetest.register_alias("chains:chain_top", "homedecor:chain_steel_top")
minetest.register_alias("chains:chain_top_brass", "homedecor:chain_brass_top")
missing chandelier alias
2019-06-07 06:50:06 +02:00
minetest.register_alias("chains:chandelier", "homedecor:chandelier_steel")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
minetest.register_alias("chains:chandelier_steel", "homedecor:chandelier_steel")
minetest.register_alias("chains:chandelier_brass", "homedecor:chandelier_brass")
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:glowlight_half", "homedecor:glowlight_half_14")
minetest.register_alias("homedecor:glowlight_half_max", "homedecor:glowlight_half_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:glowlight_quarter", "homedecor:glowlight_quarter_14")
minetest.register_alias("homedecor:glowlight_quarter_max", "homedecor:glowlight_quarter_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:glowlight_small_cube", "homedecor:glowlight_small_cube_14")
minetest.register_alias("homedecor:glowlight_small_cube_max", "homedecor:glowlight_small_cube_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:plasma_lamp", "homedecor:plasma_lamp_14")
minetest.register_alias("homedecor:plasma_lamp_max", "homedecor:plasma_lamp_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:ground_lantern", "homedecor:ground_lantern_14")
minetest.register_alias("homedecor:ground_lantern_max", "homedecor:ground_lantern_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:hanging_lantern", "homedecor:hanging_lantern_14")
minetest.register_alias("homedecor:hanging_lantern_max", "homedecor:hanging_lantern_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:ceiling_lantern", "homedecor:ceiling_lantern_14")
minetest.register_alias("homedecor:ceiling_lantern_max", "homedecor:ceiling_lantern_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:lattice_lantern_large", "homedecor:lattice_lantern_large_14")
minetest.register_alias("homedecor:lattice_lantern_large_max", "homedecor:lattice_lantern_large_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:lattice_lantern_small", "homedecor:lattice_lantern_small_14")
minetest.register_alias("homedecor:lattice_lantern_small_max", "homedecor:lattice_lantern_small_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:desk_lamp", "homedecor:desk_lamp_14")
minetest.register_alias("homedecor:desk_lamp_max", "homedecor:desk_lamp_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:ceiling_lamp", "homedecor:ceiling_lamp_14")
minetest.register_alias("homedecor:ceiling_lamp_max", "homedecor:ceiling_lamp_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:table_lamp", "homedecor:table_lamp_14")
minetest.register_alias("homedecor:table_lamp_max", "homedecor:table_lamp_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:standing_lamp", "homedecor:standing_lamp_14")
minetest.register_alias("homedecor:standing_lamp_max", "homedecor:standing_lamp_14")
make most presently non-dimmable lights dimmable merge table and standing lamps into the new code of all the relevant lights, the plasma ball is the only one that remains on/off-only, since dimmable doesn't make sense there. That one, and any future lights that get the on/off-only treatment, will use the previous on/off behavior, i.e. turn off with the messages "off" or "low" or a number < 4, and turn on with "med", "hi", "max", "on" or a number > 3 This alters the behavior of table/standing lamps - they will no longer cycle brightnesses by right-click. Like all other controllable lights, they'll just toggle on/off. If there's enough demand for it, I'll add that feature back in at a later date.
2019-06-02 08:01:54 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("3dforniture:table_lamp", "homedecor:table_lamp_14")
minetest.register_alias("3dforniture:table_lamp_max", "homedecor:table_lamp_14")
use basic_materials mod where possible
2018-10-31 01:46:10 +01:00
move "medieval" wall lamp and torch to homedecor_lighting make them mesecon/digiline controllable (on/off only, alldir rules) also fix a couple of old texture references
2019-06-02 08:35:20 +02:00
minetest.register_alias("3dforniture:torch_wall", "homedecor:torch_wall")
minetest.register_alias("torch_wall", "homedecor:torch_wall")
remove some bogus aliases, fix plasma ball
2019-06-06 07:48:44 +02:00
minetest.register_alias("homedecor:plasma_ball", "homedecor:plasma_ball_on")
minetest.register_alias("homedecor:wall_lamp", "homedecor:wall_lamp_on")
add aliases for rope lights (on/14, off/0) make right-click handler work properly for plain "on"/"off" items
2019-06-15 12:47:33 +02:00
minetest.register_alias("homedecor:rope_light_on_floor_0", "homedecor:rope_light_on_floor_off")
minetest.register_alias("homedecor:rope_light_on_floor_14", "homedecor:rope_light_on_floor_on")
minetest.register_alias("homedecor:rope_light_on_ceiling_0", "homedecor:rope_light_on_ceiling_off")
minetest.register_alias("homedecor:rope_light_on_ceiling_14", "homedecor:rope_light_on_ceiling_on")
remove some bogus aliases, fix plasma ball
2019-06-06 07:48:44 +02:00
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
for name, level in pairs(word_to_bright) do
minetest.register_alias("homedecor:glowlight_half_"..name, "homedecor:glowlight_half_"..level)
minetest.register_alias("homedecor:glowlight_quarter_"..name, "homedecor:glowlight_quarter_"..level)
minetest.register_alias("homedecor:glowlight_small_cube_"..name, "homedecor:glowlight_small_cube_"..level)
minetest.register_alias("homedecor:rope_light_on_floor_"..name, "homedecor:rope_light_on_floor_"..level)
minetest.register_alias("homedecor:rope_light_on_ceiling_"..name, "homedecor:rope_light_on_ceiling_"..level)
minetest.register_alias("homedecor:plasma_lamp_"..name, "homedecor:plasma_lamp_"..level)
minetest.register_alias("homedecor:plasma_ball_"..name, "homedecor:plasma_ball_"..level)
minetest.register_alias("homedecor:ground_lantern_"..name, "homedecor:ground_lantern_"..level)
minetest.register_alias("homedecor:hanging_lantern_"..name, "homedecor:hanging_lantern_"..level)
minetest.register_alias("homedecor:ceiling_lantern_"..name, "homedecor:ceiling_lantern_"..level)
minetest.register_alias("homedecor:lattice_lantern_large_"..name, "homedecor:lattice_lantern_large_"..level)
minetest.register_alias("homedecor:lattice_lantern_small_"..name, "homedecor:lattice_lantern_small_"..level)
minetest.register_alias("homedecor:desk_lamp_"..name, "homedecor:desk_lamp_"..level)
minetest.register_alias("homedecor:ceiling_lamp_"..name, "homedecor:ceiling_lamp_"..level)
minetest.register_alias("homedecor:table_lamp_"..name, "homedecor:table_lamp_"..level)
minetest.register_alias("homedecor:standing_lamp_"..name, "homedecor:standing_lamp_"..level)
minetest.register_alias("3dforniture:table_lamp_"..name, "homedecor:table_lamp_"..level)
end
fix global warnings
2019-05-26 03:43:13 +02:00
if minetest.get_modpath("darkage") then
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
minetest.register_alias("homedecor:lattice_lantern_large", "darkage:lamp")
for n = 0, 14 do
minetest.register_alias("homedecor:lattice_lantern_large_"..n, "darkage:lamp")
end
for name, level in pairs(word_to_bright) do
minetest.register_alias("homedecor:lattice_lantern_large_"..name, "darkage:lamp")
end
fix global warnings
2019-05-26 03:43:13 +02:00
end
make all dimmable lights fully dimmable to any level 0-14 for backward compat, they'll resond to the usual strings, too: "off" -> 0 "min" -> 3 "med" -> 7 "hi" -> 11 "max"/"on" -> 14 all dimmable nodes have been renamed to bear the light value in their names, and aliased. the non-dimmable lights still respond as before ("off" or n < 4; "on" or n > 3)
2019-06-04 06:56:00 +02:00
Copy Permalink