advanced_npc/actions/actions.lua
zorman2000 bd6d735170 Actions: Change use sittable and use bed interface to use them as tasks.
Schedules: Allow tasks to be added as well as actions.
2017-03-09 19:41:44 -05:00

632 lines
22 KiB
Lua

-- Actions code for Advanced NPC by Zorman2000
---------------------------------------------------------------------------------------
-- Action functionality
---------------------------------------------------------------------------------------
-- The NPCs will be able to perform five fundamental actions that will allow
-- for them to perform any other kind of interaction in the world. These
-- fundamental actions are: place a node, dig a node, put items on an inventory,
-- take items from an inventory, find a node closeby (radius 3) and
-- walk a step on specific direction. These actions will be set on an action queue.
-- The queue will have the specific steps, in order, for the NPC to be able to do
-- something (example, go to a specific place and put a chest there). The
-- fundamental actions are added to the action queue to make a complete task for the NPC.
npc.actions = {}
-- Describes actions with doors or openable nodes
npc.actions.const = {
doors = {
action = {
OPEN = 1,
CLOSE = 2
},
state = {
OPEN = 1,
CLOSED = 2
}
},
beds = {
LAY = 1,
GET_UP = 2
},
sittable = {
SIT = 1,
GET_UP = 2
}
}
npc.actions.one_nps_speed = 0.98
npc.actions.one_half_nps_speed = 1.40
npc.actions.two_nps_speed = 1.90
---------------------------------------------------------------------------------------
-- Actions
---------------------------------------------------------------------------------------
-- The following action alters the timer interval for executing actions, therefore
-- making waits and pauses possible, or increase timing when some actions want to
-- be performed faster, like walking.
function npc.actions.set_interval(self, args)
local self_actions = args.self_actions
local new_interval = args.interval
local freeze_mobs_api = args.freeze
self.actions.action_interval = new_interval
return not freeze_mobs_api
end
-- The following action is for allowing the rest of mobs redo API to be executed
-- after this action ends. This is useful for times when no action is needed
-- and the NPC is allowed to roam freely.
function npc.actions.freeze(self, args)
local freeze_mobs_api = args.freeze
minetest.log("Received: "..dump(freeze_mobs_api))
minetest.log("Returning: "..dump(not(freeze_mobs_api)))
return not(freeze_mobs_api)
end
-- This action is to rotate to mob to a specifc direction. Currently, the code
-- contains also for diagonals, but remaining in the orthogonal domain is preferrable.
function npc.actions.rotate(self, args)
local dir = args.dir
local yaw = 0
self.rotate = 0
if dir == npc.direction.north then
yaw = 0
elseif dir == npc.direction.north_east then
yaw = (7 * math.pi) / 4
elseif dir == npc.direction.east then
yaw = (3 * math.pi) / 2
elseif dir == npc.direction.south_east then
yaw = (5 * math.pi) / 4
elseif dir == npc.direction.south then
yaw = math.pi
elseif dir == npc.direction.south_west then
yaw = (3 * math.pi) / 4
elseif dir == npc.direction.west then
yaw = math.pi / 2
elseif dir == npc.direction.north_west then
yaw = math.pi / 4
end
self.object:setyaw(yaw)
end
-- This function will make the NPC walk one step on a
-- specifc direction. One step means one node. It returns
-- true if it can move on that direction, and false if there is an obstacle
function npc.actions.walk_step(self, args)
local dir = args.dir
local speed = args.speed
local vel = {}
-- Set default node per seconds
if speed == nil then
speed = npc.actions.one_nps_speed
end
if dir == npc.direction.north then
vel = {x=0, y=0, z=speed}
elseif dir == npc.direction.east then
vel = {x=speed, y=0, z=0}
elseif dir == npc.direction.south then
vel = {x=0, y=0, z=-speed}
elseif dir == npc.direction.west then
vel = {x=-speed, y=0, z=0}
end
-- Rotate NPC
npc.actions.rotate(self, {dir=dir})
-- Set velocity so that NPC walks
self.object:setvelocity(vel)
-- Set walk animation
self.object:set_animation({
x = npc.ANIMATION_WALK_START,
y = npc.ANIMATION_WALK_END},
self.animation.speed_normal, 0)
end
-- This action makes the NPC stand and remain like that
function npc.actions.stand(self, args)
local pos = args.pos
local dir = args.dir
-- Stop NPC
self.object:setvelocity({x=0, y=0, z=0})
-- If position given, set to that position
if pos ~= nil then
self.object:moveto(pos)
end
-- If dir given, set to that dir
if dir ~= nil then
npc.actions.rotate(self, {dir=dir})
end
-- Set stand animation
self.object:set_animation({
x = npc.ANIMATION_STAND_START,
y = npc.ANIMATION_STAND_END},
self.animation.speed_normal, 0)
end
-- This action makes the NPC sit on the node where it is
function npc.actions.sit(self, args)
local pos = args.pos
local dir = args.dir
-- Stop NPC
self.object:setvelocity({x=0, y=0, z=0})
-- If position given, set to that position
if pos ~= nil then
self.object:moveto(pos)
end
-- If dir given, set to that dir
if dir ~= nil then
npc.actions.rotate(self, {dir=dir})
end
-- Set sit animation
self.object:set_animation({
x = npc.ANIMATION_SIT_START,
y = npc.ANIMATION_SIT_END},
self.animation.speed_normal, 0)
end
-- This action makes the NPC lay on the node where it is
function npc.actions.lay(self, args)
local pos = args.pos
-- Stop NPC
self.object:setvelocity({x=0, y=0, z=0})
-- If position give, set to that position
if pos ~= nil then
self.object:moveto(pos)
end
-- Set sit animation
self.object:set_animation({
x = npc.ANIMATION_LAY_START,
y = npc.ANIMATION_LAY_END},
self.animation.speed_normal, 0)
end
-- Inventory functions for players and for nodes
-- This function is a convenience function to make it easy to put
-- and get items from another inventory (be it a player inv or
-- a node inv)
function npc.actions.put_item_on_external_inventory(self, args)
local player = args.player
local pos = args.pos
local inv_list = args.inv_list
local item_name = args.item_name
local count = args.count
local is_furnace = args.is_furnace
local inv
if player ~= nil then
inv = minetest.get_inventory({type="player", name=player})
else
inv = minetest.get_inventory({type="node", pos=pos})
end
-- Create ItemStack to put on external inventory
local item = ItemStack(item_name.." "..count)
-- Check if there is enough room to add the item on external invenotry
if inv:room_for_item(inv_list, item) then
-- Take item from NPC's inventory
if npc.take_item_from_inventory_itemstring(self, item) then
-- NPC doesn't have item and/or specified quantity
return false
end
-- Add items to external inventory
inv:add_item(inv_list, item)
-- If this is a furnace, start furnace timer
if is_furnace == true then
minetest.get_node_timer(pos):start(1.0)
end
return true
end
-- Not able to put on external inventory
return false
end
function npc.actions.take_item_from_external_inventory(self, args)
local player = args.player
local pos = args.pos
local inv_list = args.inv_list
local item_name = args.item_name
local count = args.count
local inv
if player ~= nil then
inv = minetest.get_inventory({type="player", name=player})
else
inv = minetest.get_inventory({type="node", pos=pos})
end
-- Create ItemSTack to take from external inventory
local item = ItemStack(item_name.." "..count)
-- Check if there is enough of the item to take
if inv:contains_item(inv_list, item) then
-- Add item to NPC's inventory
npc.add_item_to_inventory_itemstring(self, item)
-- Add items to external inventory
inv:remove_item(inv_list, item)
return true
end
-- Not able to put on external inventory
return false
end
function npc.actions.check_external_inventory_contains_item(self, args)
local player = args.player
local pos = args.pos
local inv_list = args.inv_list
local item_name = args.item_name
local count = args.count
local inv
if player ~= nil then
inv = minetest.get_inventory({type="player", name=player})
else
inv = minetest.get_inventory({type="node", pos=pos})
end
-- Create ItemStack for checking the external inventory
local item = ItemStack(item_name.." "..count)
-- Check if inventory contains item
return inv:contains_item(inv_list, item)
end
-- TODO: Refactor this function so that it uses a table to check
-- for doors instead of having separate logic for each door type
function npc.actions.get_openable_node_state(node, npc_dir)
minetest.log("Node name: "..dump(node.name))
local state = npc.actions.const.doors.state.CLOSED
-- Check for default doors and gates
local a_i1, a_i2 = string.find(node.name, "_a")
-- Check for cottages gates
local open_i1, open_i2 = string.find(node.name, "_close")
-- Check for cottages half door
local half_door_is_closed = false
if node.name == "cottages:half_door" then
half_door_is_closed = (node.param2 + 2) % 4 == npc_dir
end
if a_i1 == nil and open_i1 == nil and not half_door_is_closed then
state = npc.actions.const.doors.state.OPEN
end
minetest.log("Door state: "..dump(state))
return state
end
-- This function is used to open or close openable nodes.
-- Currently supported openable nodes are: any doors using the
-- default doors API, and the cottages mod gates and doors.
function npc.actions.use_door(self, args)
local pos = args.pos
local action = args.action
local dir = args.dir
local node = minetest.get_node(pos)
local state = npc.actions.get_openable_node_state(node, dir)
local clicker = self.object
if action ~= state then
minetest.registered_nodes[node.name].on_rightclick(pos, node, clicker, nil, nil)
end
end
---------------------------------------------------------------------------------------
-- Tasks functionality
---------------------------------------------------------------------------------------
-- Tasks are operations that require many actions to perform. Basic tasks, like
-- walking from one place to another, operating a furnace, storing or taking
-- items from a chest, are provided here.
-- This function allows a NPC to use a furnace using only items from
-- its own inventory. Fuel is not provided. Once the furnace is finished
-- with the fuel items the NPC will take whatever was cooked and whatever
-- remained to cook. The function received the position of the furnace
-- to use, and the item to cook in furnace. Item is an itemstring
function npc.actions.use_furnace(self, args)
local pos = args.pos
local item = args.item
local freeze = args.freeze
-- Define which items are usable as fuels. The NPC
-- will mainly use this as fuels to avoid getting useful
-- items (such as coal lumps) for burning
local fuels = {"default:leaves",
"default:pine_needles",
"default:tree",
"default:acacia_tree",
"default:aspen_tree",
"default:jungletree",
"default:pine_tree",
"default:coalblock",
"farming:straw"}
-- Check if NPC has item to cook
local src_item = npc.inventory_contains(self, npc.get_item_name(item))
if src_item == nil then
-- Unable to cook item that is not in inventory
return false
end
-- Check if NPC has a fuel item
for i = 1,9 do
local fuel_item = npc.inventory_contains(self, fuels[i])
if fuel_item ~= nil then
-- Get fuel item's burn time
local fuel_time =
minetest.get_craft_result({method="fuel", width=1, items={ItemStack(fuel_item.item_string)}}).time
local total_fuel_time = fuel_time * npc.get_item_count(fuel_item.item_string)
minetest.log("Fuel time: "..dump(fuel_time))
-- Get item to cook's cooking time
local cook_result =
minetest.get_craft_result({method="cooking", width=1, items={ItemStack(src_item.item_string)}})
local total_cook_time = cook_result.time * npc.get_item_count(item)
minetest.log("Cook: "..dump(cook_result))
minetest.log("Total cook time: "..total_cook_time
..", total fuel burn time: "..dump(total_fuel_time))
-- Check if there is enough fuel to cook all items
if total_cook_time > total_fuel_time then
-- Don't have enough fuel to cook item. Return the difference
-- so it may help on trying to acquire the fuel later.
-- NOTE: Yes, returning here means that NPC could probably have other
-- items usable as fuels and ignore them. This should be ok for now,
-- considering that fuel items are ordered in a way where cheaper, less
-- useless items come first, saving possible valuable items.
return cook_result.time - fuel_time
end
-- Calculate how much fuel is needed
local fuel_amount = total_cook_time / fuel_time
if fuel_amount < 1 then
fuel_amount = 1
end
minetest.log("Amount of fuel needed: "..fuel_amount)
-- Put this item on the fuel inventory list of the furnace
local args = {
player = nil,
pos = pos,
inv_list = "fuel",
item_name = npc.get_item_name(fuel_item.item_string),
count = fuel_amount
}
npc.add_action(self, npc.actions.put_item_on_external_inventory, args)
-- Put the item that we want to cook on the furnace
args = {
player = nil,
pos = pos,
inv_list = "src",
item_name = npc.get_item_name(src_item.item_string),
count = npc.get_item_count(item),
is_furnace = true
}
npc.add_action(self, npc.actions.put_item_on_external_inventory, args)
-- Now, set NPC to wait until furnace is done.
minetest.log("Setting wait action for "..dump(total_cook_time))
npc.add_action(self, npc.actions.set_interval, {interval=total_cook_time, freeze=freeze})
-- Reset timer
npc.add_action(self, npc.actions.set_interval, {interval=1, freeze=true})
-- If freeze is false, then we will have to find the way back to the furnace
-- once cooking is done.
if freeze == false then
minetest.log("Adding walk to position to wandering: "..dump(pos))
npc.add_task(self, npc.actions.walk_to_pos, {end_pos=pos, walkable={}})
end
-- Take cooked items back
args = {
player = nil,
pos = pos,
inv_list = "dst",
item_name = cook_result.item:get_name(),
count = npc.get_item_count(item),
is_furnace = false
}
minetest.log("Taking item back: "..dump(pos))
npc.add_action(self, npc.actions.take_item_from_external_inventory, args)
minetest.log("Inventory: "..dump(self.inventory))
return true
end
end
-- Couldn't use the furnace due to lack of items
return false
end
-- This function makes the NPC lay or stand up from a bed. The
-- pos is the location of the bed, action can be lay or get up
function npc.actions.use_bed(self, pos, action)
local node = minetest.get_node(pos)
minetest.log(dump(node))
local dir = minetest.facedir_to_dir(node.param2)
if action == npc.actions.const.beds.LAY then
-- Get position
local bed_pos = npc.actions.nodes.beds[node.name].get_lay_pos(pos, dir)
-- Sit down on bed, rotate to correct direction
npc.add_action(self, npc.actions.sit, {pos=bed_pos, dir=(node.param2 + 2) % 4})
-- Lay down
npc.add_action(self, npc.actions.lay, {})
else
-- Calculate position to get up
local bed_pos_y = npc.actions.nodes.beds[node.name].get_lay_pos(pos, dir).y
local bed_pos = {x = pos.x, y = bed_pos_y, z = pos.z}
-- Sit up
npc.add_action(self, npc.actions.sit, {pos=bed_pos})
-- Initialize direction: Default is front of bottom of bed
local dir = (node.param2 + 2) % 4
-- Find empty node around node
-- Take into account that mats are close to the floor, so y adjustmen is zero
local y_adjustment = -1
if npc.actions.nodes.beds[node.name].type == "mat" then
y_adjustment = 0
end
local empty_nodes = npc.places.find_node_orthogonally(bed_pos, {"air", "cottages:bench"}, y_adjustment)
if empty_nodes ~= nil then
-- Get direction to the empty node
dir = npc.actions.get_direction(bed_pos, empty_nodes[1].pos)
end
-- Calculate position to get out of bed
local pos_out_of_bed =
{x=empty_nodes[1].pos.x, y=empty_nodes[1].pos.y + 1, z=empty_nodes[1].pos.z}
-- Account for benches if they are present to avoid standing over them
if empty_nodes[1].name == "cottages:bench" then
pos_out_of_bed = {x=empty_nodes[1].pos.x, y=empty_nodes[1].pos.y + 1, z=empty_nodes[1].pos.z}
if empty_nodes[1].param2 == 0 then
pos_out_of_bed.z = pos_out_of_bed.z - 0.3
elseif empty_nodes[1].param2 == 1 then
pos_out_of_bed.x = pos_out_of_bed.x - 0.3
elseif empty_nodes[1].param2 == 2 then
pos_out_of_bed.z = pos_out_of_bed.z + 0.3
elseif empty_nodes[1].param2 == 3 then
pos_out_of_bed.x = pos_out_of_bed.x + 0.3
end
end
-- Stand out of bed
npc.add_action(self, npc.actions.stand, {pos=pos_out_of_bed, dir=dir})
end
end
-- This function makes the NPC lay or stand up from a bed. The
-- pos is the location of the bed, action can be lay or get up
function npc.actions.use_sittable(self, args)
local pos = args.pos
local action = args.action
local node = minetest.get_node(pos)
if action == npc.actions.const.sittable.SIT then
-- Calculate position depending on bench
minetest.log("Got sit position: "..dump(sit_pos))
local sit_pos = npc.actions.nodes.sittable[node.name].get_sit_pos(pos, node.param2)
-- Sit down on bench/chair/stairs
npc.add_action(self, npc.actions.sit, {pos=sit_pos, dir=(node.param2 + 2) % 4})
else
-- Find empty areas around chair
local dir = node.param2 + 2 % 4
local empty_nodes = npc.places.find_node_orthogonally(pos, {"air"}, 0)
if empty_nodes ~= nil then
-- Get direction to the empty node
dir = npc.actions.get_direction(pos, empty_nodes[1].pos)
end
-- Calculate position to get out of bed
local pos_out_of_sittable =
{x=empty_nodes[1].pos.x, y=empty_nodes[1].pos.y + 1, z=empty_nodes[1].pos.z}
-- Stand
npc.add_action(self, npc.actions.stand, {pos=pos_out_of_sittable, dir=dir})
end
end
-- This function returns the direction enum
-- for the moving from v1 to v2
function npc.actions.get_direction(v1, v2)
local dir = vector.subtract(v2, v1)
if dir.x ~= 0 then
if dir.x > 0 then
return npc.direction.east
else
return npc.direction.west
end
elseif dir.z ~= 0 then
if dir.z > 0 then
return npc.direction.north
else
return npc.direction.south
end
end
end
-- This function can be used to make the NPC walk from one
-- position to another. If the optional parameter walkable_nodes
-- is included, which is a table of node names, these nodes are
-- going to be considered walkable for the algorithm to find a
-- path.
function npc.actions.walk_to_pos(self, args)
-- Get arguments for this task
local end_pos = args.end_pos
local walkable_nodes = args.walkable
-- Round start_pos to make sure it can find start and end
local start_pos = vector.round(self.object:getpos())
-- Use y of end_pos (this can only be done assuming flat terrain)
start_pos.y = self.object:getpos().y
minetest.log("Walk to pos: Using start position: "..dump(start_pos))
-- Set walkable nodes to empty if the parameter hasn't been used
if walkable_nodes == nil then
walkable_nodes = {}
end
-- Find path
local path = pathfinder.find_path(start_pos, end_pos, 20, walkable_nodes)
if path ~= nil then
minetest.log("Found path to node: "..dump(end_pos))
-- Local variables
local door_opened = false
local speed = npc.actions.two_nps_speed
-- Set the action timer interval to half second. This is to account for
-- the increased speed when walking.
npc.add_action(self, npc.actions.set_interval, {interval=0.5, freeze=true})
-- Add steps to path
for i = 1, #path do
-- Do not add an extra step if reached the goal node
if (i+1) == #path then
-- Add direction to last node
local dir = npc.actions.get_direction(path[i].pos, end_pos)
-- Add stand animation at end
npc.add_action(self, npc.actions.stand, { dir = dir})
break
end
-- Get direction to move from path[i] to path[i+1]
local dir = npc.actions.get_direction(path[i].pos, path[i+1].pos)
-- Check if next node is a door, if it is, open it, then walk
if path[i+1].type == pathfinder.node_types.openable then
-- Check if door is already open
local node = minetest.get_node(path[i+1].pos)
if npc.actions.get_openable_node_state(node, dir) == npc.actions.const.doors.state.CLOSED then
minetest.log("Opening action to open door")
-- Stop to open door, this avoids misplaced movements later on
npc.add_action(self, npc.actions.stand, {dir=dir})
-- Open door
npc.add_action(self, npc.actions.use_door, {pos=path[i+1].pos, dir=dir, action=npc.actions.const.doors.action.OPEN})
door_opened = true
end
end
-- Add walk action to action queue
npc.add_action(self, npc.actions.walk_step, {dir = dir, speed = speed})
if door_opened then
-- Stop to close door, this avoids misplaced movements later on
local x_adj, z_adj = 0, 0
if dir == 0 then
z_adj = 0.1
elseif dir == 1 then
x_adj = 0.1
elseif dir == 2 then
z_adj = -0.1
elseif dir == 3 then
x_adj = -0.1
end
local pos_on_close = {x=path[i+1].pos.x + x_adj, y=path[i+1].pos.y + 1, z=path[i+1].pos.z + z_adj}
npc.add_action(self, npc.actions.stand, {dir=(dir + 2)% 4, pos=pos_on_close})
-- Close door
npc.add_action(self, npc.actions.use_door, {pos=path[i+1].pos, action=npc.actions.const.doors.action.CLOSE})
door_opened = false
end
end
-- Return the action interval to default interval of 1 second
-- By default, always freeze.
npc.add_action(self, npc.actions.set_interval, {interval=1, freeze=true})
else
minetest.log("Unable to find path.")
end
end