cottages/nodes_doorlike.lua

438 lines
16 KiB
Lua

-----------------------------------------------------------------------------------------------------------
-- These nodes are all like doors in a way:
-- * window shutters (they open on right-click and when it turns day; they close at night)
-- * a half-door where the top part can be opened seperately from the bottom part
-- * a gate that drops to the floor when opened
--
-----------------------------------------------------------------------------------------------------------
-- IMPORTANT NOTICE: If you have a very slow computer, it might be wise to increase the rate at which the
-- abm that opens/closes the window shutters is called. Anything less than 10 minutes
-- (600 seconds) ought to be ok.
-----------------------------------------------------------------------------------------------------------
local S = cottages.S
-----------------------------------------------------------------------------------------------------------
-- small window shutters for single-node-windows; they open at day and close at night if the abm is working
-----------------------------------------------------------------------------------------------------------
-- propagate shutting/closing of window shutters to window shutters below/above this one
cottages_window_sutter_operate = function( pos, old_node_state_name, new_node_state_name )
local offsets = {-1,1,-2,2,-3,3};
local stop_up = 0;
local stop_down = 0;
for i,v in ipairs(offsets) do
local node = minetest.get_node_or_nil( {x=pos.x, y=(pos.y+v), z=pos.z } );
if( node and node.name and node.name==old_node_state_name
and ( (v > 0 and stop_up == 0 )
or (v < 0 and stop_down == 0 ))) then
minetest.swap_node({x=pos.x, y=(pos.y+v), z=pos.z }, {name = new_node_state_name, param2 = node.param2})
-- found a diffrent node - no need to search further up
elseif( v > 0 and stop_up == 0 ) then
stop_up = 1;
elseif( v < 0 and stop_down == 0 ) then
stop_down = 1;
end
end
end
-- window shutters - they cover half a node to each side
minetest.register_node("cottages:window_shutter_open", {
description = S("opened window shutters"),
drawtype = "nodebox",
-- top, bottom, side1, side2, inner, outer
tiles = {"cottages_minimal_wood.png"},
paramtype = "light",
paramtype2 = "facedir",
groups = {snappy=2,choppy=2,oddly_breakable_by_hand=2},
-- larger than one node but slightly smaller than a half node so that wallmounted torches pose no problem
node_box = {
type = "fixed",
fixed = {
{-0.90, -0.5, 0.4, -0.45, 0.5, 0.5},
{ 0.45, -0.5, 0.4, 0.9, 0.5, 0.5},
},
},
selection_box = {
type = "fixed",
fixed = {
{-0.9, -0.5, 0.4, 0.9, 0.5, 0.5},
},
},
on_rightclick = function(pos, node, puncher)
minetest.swap_node(pos, {name = "cottages:window_shutter_closed", param2 = node.param2})
cottages_window_sutter_operate( pos, "cottages:window_shutter_open", "cottages:window_shutter_closed" );
end,
is_ground_content = false,
})
minetest.register_node("cottages:window_shutter_closed", {
description = S("closed window shutters"),
drawtype = "nodebox",
-- top, bottom, side1, side2, inner, outer
tiles = {"cottages_minimal_wood.png"},
paramtype = "light",
paramtype2 = "facedir",
groups = {snappy=2,choppy=2,oddly_breakable_by_hand=2,not_in_creative_inventory=1},
node_box = {
type = "fixed",
fixed = {
{-0.5, -0.5, 0.4, -0.05, 0.5, 0.5},
{ 0.05, -0.5, 0.4, 0.5, 0.5, 0.5},
},
},
selection_box = {
type = "fixed",
fixed = {
{-0.5, -0.5, 0.4, 0.5, 0.5, 0.5},
},
},
on_rightclick = function(pos, node, puncher)
minetest.swap_node(pos, {name = "cottages:window_shutter_open", param2 = node.param2})
cottages_window_sutter_operate( pos, "cottages:window_shutter_closed", "cottages:window_shutter_open" );
end,
is_ground_content = false,
drop = "cottages:window_shutter_open",
})
-- open shutters in the morning
minetest.register_abm({
nodenames = {"cottages:window_shutter_closed"},
interval = 20, -- change this to 600 if your machine is too slow
chance = 3, -- not all people wake up at the same time!
action = function(pos)
-- at this time, sleeping in a bed is not possible
if( not(minetest.get_timeofday() < 0.2 or minetest.get_timeofday() > 0.805)) then
local old_node = minetest.get_node( pos );
minetest.swap_node(pos, {name = "cottages:window_shutter_open", param2 = old_node.param2})
cottages_window_sutter_operate( pos, "cottages:window_shutter_closed", "cottages:window_shutter_open" );
end
end
})
-- close them at night
minetest.register_abm({
nodenames = {"cottages:window_shutter_open"},
interval = 20, -- change this to 600 if your machine is too slow
chance = 2,
action = function(pos)
-- same time at which sleeping is allowed in beds
if( minetest.get_timeofday() < 0.2 or minetest.get_timeofday() > 0.805) then
local old_node = minetest.get_node( pos );
minetest.swap_node(pos, {name = "cottages:window_shutter_closed", param2 = old_node.param2})
cottages_window_sutter_operate( pos, "cottages:window_shutter_open", "cottages:window_shutter_closed" );
end
end
})
------------------------------------------------------------------------------------------------------------------------------
-- a half door; can be combined to a full door where the upper part can be operated seperately; usually found in barns/stables
------------------------------------------------------------------------------------------------------------------------------
minetest.register_node("cottages:half_door", {
description = S("half door"),
drawtype = "nodebox",
-- top, bottom, side1, side2, inner, outer
tiles = {"cottages_minimal_wood.png"},
paramtype = "light",
paramtype2 = "facedir",
groups = {snappy=2,choppy=2,oddly_breakable_by_hand=2},
node_box = {
type = "fixed",
fixed = {
{-0.5, -0.5, 0.4, 0.48, 0.5, 0.5},
},
},
selection_box = {
type = "fixed",
fixed = {
{-0.5, -0.5, 0.4, 0.48, 0.5, 0.5},
},
},
on_rightclick = function(pos, node, puncher)
local node2 = minetest.get_node( {x=pos.x,y=(pos.y+1),z=pos.z});
local param2 = node.param2;
if( param2%4 == 1) then param2 = param2+1; --2;
elseif( param2%4 == 2) then param2 = param2-1; --1;
elseif( param2%4 == 3) then param2 = param2-3; --0;
elseif( param2%4 == 0) then param2 = param2+3; --3;
end;
minetest.swap_node(pos, {name = "cottages:half_door", param2 = param2})
-- if the node above consists of a door of the same type, open it as well
-- Note: doors beneath this one are not opened! It is a special feature of these doors that they can be opend partly
if( node2 ~= nil and node2.name == node.name and node2.param2==node.param2) then
minetest.swap_node( {x=pos.x,y=(pos.y+1),z=pos.z}, {name = "cottages:half_door", param2 = param2})
end
end,
is_ground_content = false,
})
minetest.register_node("cottages:half_door_inverted", {
description = S("half door inverted"),
drawtype = "nodebox",
-- top, bottom, side1, side2, inner, outer
tiles = {"cottages_minimal_wood.png"},
paramtype = "light",
paramtype2 = "facedir",
groups = {snappy=2,choppy=2,oddly_breakable_by_hand=2},
node_box = {
type = "fixed",
fixed = {
{-0.5, -0.5, -0.5, 0.48, 0.5, -0.4},
},
},
selection_box = {
type = "fixed",
fixed = {
{-0.5, -0.5, -0.5, 0.48, 0.5, -0.4},
},
},
on_rightclick = function(pos, node, puncher)
local node2 = minetest.get_node( {x=pos.x,y=(pos.y+1),z=pos.z});
local param2 = node.param2;
if( param2%4 == 1) then param2 = param2-1; --0;
elseif( param2%4 == 0) then param2 = param2+1; --1;
elseif( param2%4 == 2) then param2 = param2+1; --3;
elseif( param2%4 == 3) then param2 = param2-1; --2;
end;
minetest.swap_node(pos, {name = "cottages:half_door_inverted", param2 = param2})
-- open upper parts of this door (if there are any)
if( node2 ~= nil and node2.name == node.name and node2.param2==node.param2) then
minetest.swap_node( {x=pos.x,y=(pos.y+1),z=pos.z}, {name = "cottages:half_door_inverted", param2 = param2})
end
end,
is_ground_content = false,
})
------------------------------------------------------------------------------------------------------------------------------
-- this gate for fences solves the "where to store the opened gate" problem by dropping it to the floor in optened state
------------------------------------------------------------------------------------------------------------------------------
minetest.register_node("cottages:gate_closed", {
description = S("closed fence gate"),
drawtype = "nodebox",
-- top, bottom, side1, side2, inner, outer
tiles = {cottages.texture_furniture},
paramtype = "light",
paramtype2 = "facedir",
groups = {snappy=2,choppy=2,oddly_breakable_by_hand=2},
node_box = {
type = "fixed",
fixed = {
{ -0.85, -0.25, -0.02, 0.85, -0.05, 0.02},
{ -0.85, 0.15, -0.02, 0.85, 0.35, 0.02},
{ -0.80, -0.05, -0.02, -0.60, 0.15, 0.02},
{ 0.60, -0.05, -0.02, 0.80, 0.15, 0.02},
{ -0.15, -0.05, -0.02, 0.15, 0.15, 0.02},
},
},
selection_box = {
type = "fixed",
fixed = {
{ -0.85, -0.25, -0.1, 0.85, 0.35, 0.1},
},
},
on_rightclick = function(pos, node, puncher)
minetest.swap_node(pos, {name = "cottages:gate_open", param2 = node.param2})
end,
is_ground_content = false,
})
minetest.register_node("cottages:gate_open", {
description = S("opened fence gate"),
drawtype = "nodebox",
-- top, bottom, side1, side2, inner, outer
tiles = {cottages.texture_furniture},
paramtype = "light",
paramtype2 = "facedir",
drop = "cottages:gate_closed",
groups = {snappy=2,choppy=2,oddly_breakable_by_hand=2,not_in_creative_inventory=1},
node_box = {
type = "fixed",
fixed = {
{ -0.85, -0.5, -0.25, 0.85, -0.46, -0.05},
{ -0.85, -0.5, 0.15, 0.85, -0.46, 0.35},
{ -0.80, -0.5, -0.05, -0.60, -0.46, 0.15},
{ 0.60, -0.5, -0.05, 0.80, -0.46, 0.15},
{ -0.15, -0.5, -0.05, 0.15, -0.46, 0.15},
},
},
selection_box = {
type = "fixed",
fixed = {
{ -0.85, -0.5, -0.25, 0.85, -0.3, 0.35},
},
},
on_rightclick = function(pos, node, puncher)
minetest.swap_node(pos, {name = "cottages:gate_closed", param2 = node.param2})
end,
is_ground_content = false,
drop = "cottages:gate_closed",
})
-----------------------------------------------------------------------------------------------------------
-- a hatch; nodebox definition taken from realtest
-----------------------------------------------------------------------------------------------------------
-- hatches rotate around their axis
-- old facedir: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15,16,17,18,19,20,21,22,23
new_facedirs = { 10,19, 4,13, 2,18,22,14,20,16, 0,12,11, 3, 7,21, 9,23, 5, 1, 8,15, 6,17};
cottages.register_hatch = function( nodename, description, texture, receipe_item )
minetest.register_node( nodename, {
description = S(description), -- not that there are any other...
drawtype = "nodebox",
-- top, bottom, side1, side2, inner, outer
tiles = { texture },
paramtype = "light",
paramtype2 = "facedir",
groups = {snappy=2,choppy=2,oddly_breakable_by_hand=2},
node_box = {
type = "fixed",
fixed = {
{-0.49, -0.55, -0.49, -0.3, -0.45, 0.45},
-- {-0.5, -0.55, 0.3, 0.3, -0.45, 0.5},
{0.3, -0.55, -0.3, 0.49, -0.45, 0.45},
{0.49, -0.55, -0.49, -0.3, -0.45, -0.3},
{-0.075, -0.55, -0.3, 0.075, -0.45, 0.3},
{-0.3, -0.55, -0.075, -0.075, -0.45, 0.075},
{0.075, -0.55, -0.075, 0.3, -0.45, 0.075},
{-0.3, -0.55, 0.3, 0.3, -0.45, 0.45},
-- hinges
{-0.45,-0.530, 0.45, -0.15,-0.470, 0.525},
{ 0.15,-0.530, 0.45, 0.45,-0.470, 0.525},
-- handle
{-0.05,-0.60,-0.35, 0.05,-0.40,-0.45},
},
},
selection_box = {
type = "fixed",
fixed = {-0.5, -0.55, -0.5, 0.5, -0.45, 0.5},
},
on_rightclick = function(pos, node, puncher)
minetest.swap_node(pos, {name = node.name, param2 = new_facedirs[ node.param2+1 ]})
end,
is_ground_content = false,
on_place = minetest.rotate_node,
})
minetest.register_craft({
output = nodename,
recipe = {
{ '', '', receipe_item },
{ receipe_item, cottages.craftitem_stick, '' },
{ '', '', '' },
}
})
end
-- further alternate hatch materials: wood, tree, copper_block
cottages.register_hatch( 'cottages:hatch_wood', 'wooden hatch', 'cottages_minimal_wood.png', cottages.craftitem_slab_wood );
cottages.register_hatch( 'cottages:hatch_steel', 'metal hatch', 'cottages_steel_block.png', cottages.craftitem_steel );
-----------------------------------------------------------------------------------------------------------
-- and now the crafting receipes:
-----------------------------------------------------------------------------------------------------------
-- transform opend and closed shutters into each other for convenience
minetest.register_craft({
output = "cottages:window_shutter_open",
recipe = {
{"cottages:window_shutter_closed" },
}
})
minetest.register_craft({
output = "cottages:window_shutter_closed",
recipe = {
{"cottages:window_shutter_open" },
}
})
minetest.register_craft({
output = "cottages:window_shutter_open",
recipe = {
{cottages.craftitem_wood, "", cottages.craftitem_wood },
}
})
-- transform one half door into another
minetest.register_craft({
output = "cottages:half_door",
recipe = {
{"cottages:half_door_inverted" },
}
})
minetest.register_craft({
output = "cottages:half_door_inverted",
recipe = {
{"cottages:half_door" },
}
})
minetest.register_craft({
output = "cottages:half_door 2",
recipe = {
{"", cottages.craftitem_wood, "" },
{"", cottages.craftitem_door, "" },
}
})
-- transform open and closed versions into into another for convenience
minetest.register_craft({
output = "cottages:gate_closed",
recipe = {
{"cottages:gate_open" },
}
})
minetest.register_craft({
output = "cottages:gate_open",
recipe = {
{"cottages:gate_closed"},
}
})
minetest.register_craft({
output = "cottages:gate_closed",
recipe = {
{cottages.craftitem_stick, cottages.craftitem_stick, cottages.craftitem_wood },
}
})