Preserve overlapping registrations of large and small clusters
below y = -64 but now extend the small clusters up to y = 0 (the
previous highest iron ore level) in a similar to way to coal
Re-order registrations
Add and improve comments
Change sand blob ymax to 0 as sand does not always rise above 0
Remove dirt blobs from sandstone as it is unsuitable for
many sandstone biomes and ugly in stony sandstone desert
Change ymax of first iron region to 0
- Placing liquid inside a protected area no longer returns an empty bucket
- Remove on_place function, tidy up code, return proper itemstack
- Shorten code (changes from HybridDog/patch-35)
- Global functions sethome.set(name, pos) , sethome.get(name) and sethome.go(name)
- Tidy: trim coords to one decimal place and write to table and output table in one go.
- Add error checking
- Add t4im's homepos loader
Allow many crafted nodes to be rotated in any way possible.
These blocks all have slab and stair versions, which can create awkward
patterns if placed together. By allowing these to be rotated players
can create new patterns and appearances that were not before possible.
Since this wasn't possible before, there won't be any effect
to existing builds, as param2 should always be '0'. The current
screwdriver mod also refuses to rotate and alter param2, so this is
safe to enable from now on.
Personally, since these are all *crafted* nodes to begin with, it
should be apparent that they can be rotated to begin with, but I can
see people may disagree from a simplicity perspective. It also may
affect param2 usage that other mods rely on, although I'm not aware
of any mods that do this.
Lowering the top surface to be level with the boat top somehow
causes the boat to fall through world if underwater. Revert to
previous position that is needed for correct behaviour
Allow water to turn cobble slab and stairs to turn into mossy versions.
There is no crafting recipe for mossy stairs and mossy slabs, the
stair/slab API has been modified to allow for a recipeitem that
is `nil`, which will omit adding a crafting recipe for these two
items. The API documentation is updated.
The slabs and stairs will turn mossy when water is adjacent, just like
cobblestone. You can either farm mossy versions by placing them in
water for a while, then collecting them, or run water over your craft.
Enable ignition of tnt, gunpowder and permanent
flame above coalblock using flint and steel
Override coalblock to remove flame above when dug
Add depends.txt for default mod
Mese texture is a classic-mese-yellow version
of celeron55's texture used in MTv0.4.0
Add missing texture credits for mese crystal
and mese crystal fragment
Because the fire nodes are not removed 100% when there are
no more burnable nodes nearby, they can potentially stay around
for very, very long times, leading to ABM trains every 5 seconds
for no good reason (only 1 in 16 will be removed every interval).
A much better method to remove fire nodes is to remove them by
timer, and give removal a 100% chance if no flammable nodes are
adjacent. This makes fire cleanup a lot faster and more natural,
and will reduce the amount of ABM hits making fire overall more
responsive.
We also remove the 1 in 4 chance and fold the removal of flammable
nodes into the ABM chance.
There's some low hanging fruit cleanups in here as well.
Each sapling is given a single node timer that is between
2 and 4 days of game play time (40-80 minutes). If you walk out
of the zone, and come back later, the tree will always grow
to full if the timer has elapsed.
Because trees.lua is all functions, it needs to be parsed before
nodes.lua, since that references some of its functions. Hence,
change the order of parsing here. Otherwise saplings would not
grow to full.
This PR requires @minetest/minetest#3677
Farming and plant growth has traditionally in minetest been
implemented using ABM's. These ABM's periodically tick and cause
plants to grow. The way these ABM's work has several side effects
that can be considered harmful.
Not to mention a comprehensive list of downsides here, but ABM's
are chance-dependent. That results in the chance that some nodes
potentially never get processed by the ABM action, and others get
processed always. One can easily find this effect by planting a large
field of crops, and seeing that some nodes are fully grown really
fast, and some just won't make it to fully grown status even after
hours or play time.
One could solve the problem by making the ABM's slower, and giving them
a 100% of action, but this would cause the entire field to grow a step
instantly at ABM intervals, and is both ugly, and a large number of
node updates that needs to be sent out to each client. Very un-ideal.
With NodeTimers though, each node will see a separate node timer event,
and they will likely not coalesce. This means that we can stop relying
on chance to distribute plant growth, and assign a single timer event
to grow the plant to the next phase. Due to the timer implementation,
we won't ever miss a growth event, and we can re-scehdule them until
the plant has reached full size.
Previously, plants would attempt to grow every 9 seconds, with a
chance of 1/20. This means typically, a plant would need 9*20 seconds
to grow 1 phase, and since there are 8 steps, a typical plant growth
would require 9*20*8 ABM node events. (spread out over 9*8 ABM actual
underlying events per block, roughly).
because plants are likely not growing to full for a very long time
due to statistics working against it (5% of the crops take 20x longer
than the median to grow to full, we'd be seeing ABMs fire possibly
up to 9*20*8*20 with a 95% confidence interval (the actual math
is likely off, but the scale should be correct). That's incredibly
wasteful. We'd reach those conditions easily with 20 plant nodes.
Now, after we convert to NodeTimers, each plant node will see exactly
8 NodeTimer events, and no more. This scales lineairly per plant.
I've tuned the growth rate of crops to be mature in just under 3
whole days. That's about 1hr of game time. Previously, about half
the crops would grow to full in under 2 days, but many plants would
still not be mature by the end of day 3. This is more consistent.
An additional problem in the farming mod was that the final fully-grown
plant was also included in the ABM, causing infinite more ABM's even
after the entire field had grown to completion.
Now, we're left with the problem that none of the pre-existing plants
have actual node timers started on them, and we do not want a new ABM
to fix this issue, since that would be wasteful. Fortunately, there
is now an LBM concept, and we can use it to assure that NodeTimers
on crop nodes are properly started, and only have to do the actual
conversion once per block, ever.
We want to provide a fairly similar growth rate after this conversion
and as such I've resorted to modelling some statistical data. For this
I created a virtual 32x32 crop field with 9 steps (8 transitions)
as is the default wheat crop. We then apply a step where 1 in 20
plants in the field grows a step (randomly chosen) and count the
number of steps needed to get to 25%, 50, 75% and 95% grown.
The resulting data looks as follows:
25% - ~120 steps * 9 sec / abm = 1080s
50% - ~152 steps = 1368s
75% - ~194 steps = 1746s
95% - ~255 steps = 2295s
Next, we want to create a model where the chance that a crop grows
is 100% every node timer. Since there will only be 8 steps ever,
we want the slowest crops to grow in intervals of ~ 2300 / 8 seconds
and the fastest 1/4 of crops to grow 1080 / 8 seconds intervals.
We can roughly compare this to a normal distribution with a median
of 1400 with a stddev of ~350 (thick fingering this one here).
The rest is a bit of thick-fingering to get similar growth rates,
taking into account that ABM's fire regularly so if they're missed
it's fairly painless, but our timers are going to be 1-2 minutes
apart at minimum. I calculate the timer should be around 150s
median, and experimented with several jitter ranges.
Eventually I settled for now on [80,200] with a redo of [40,80],
meaning that each growth step at minimum takes (80 to 200) seconds,
and if a negative growth condition was found (darkness, soil not
wet, etc), then the growth step is retried every (40 to 80) seconds.
The end result is a growth period from seed to full in ~ 2.25
minetest days. This is a little bit shorter than the current
growth rate but the chances you'll miss timer ticks is a bit
larger, so in normal gameplay it should be fairly comparable.
A side effect is that fields grow to full yield fairly quickly
after crops make it to mature growth, and no crops are mature
a very long time before the majority grows to full. The spread
and view over a growing field is also fairly even, there's no
large updates with plenty of nodes. Just a node here or there
every second or so in large fields.
Ultimately, we get rid of ABM rollercoasters that cause tens of
node updates every 9 seconds. This will help multiplayer servers
likely a lot.
Standing on a boat makes you appear to "hover" over it since this
collision box is way too high. Lower it so that it's low enough
to look normal when walking on top of a boat
paramat
Tim
tenplus1
Thomas--S
HybridDog
Xunto
Yutao Yuan
Auke Kok
cd2
Duane Robertson