diff --git a/mods/plantlife_modpack/dryplants/init.lua b/mods/plantlife_modpack/dryplants/init.lua
index 3c8b30ae..b33304fd 100644
--- a/mods/plantlife_modpack/dryplants/init.lua
+++ b/mods/plantlife_modpack/dryplants/init.lua
@@ -31,6 +31,27 @@ end
 -----------------------------------------------------------------------------------------------
 -- Sickle
 -----------------------------------------------------------------------------------------------
+local function sickle_can_break(pos, deff, player)
+	local def = ItemStack({name=deff.name}):get_definition()
+
+	if not def.diggable or (def.can_dig and not def.can_dig(pos,player)) then
+		minetest.log("info", player:get_player_name() .. " tried to sickle "
+		.. def.name .. " which is not diggable "
+		.. minetest.pos_to_string(pos))
+		return
+	end
+
+	if minetest.is_protected(pos, player:get_player_name()) then
+		minetest.log("action", player:get_player_name()
+			.. " tried to sickle " .. def.name
+			.. " at protected position "
+			.. minetest.pos_to_string(pos))
+		minetest.record_protection_violation(pos, player:get_player_name())
+		return
+	end
+
+	return true
+end
 -- turns nodes with group flora=1 & flower=0 into cut grass
 local function sickle_on_use(itemstack, user, pointed_thing, uses)
 	local pt = pointed_thing
@@ -41,11 +62,11 @@ local function sickle_on_use(itemstack, user, pointed_thing, uses)
 	if pt.type ~= "node" then
 		return
 	end
-	
+
 	local under = minetest.get_node(pt.under)
-	local p = {x=pt.under.x, y=pt.under.y+1, z=pt.under.z}
-	local above = minetest.get_node(p)
-	
+	local above_pos = {x=pt.under.x, y=pt.under.y+1, z=pt.under.z}
+	local above = minetest.get_node(above_pos)
+
 	-- return if any of the nodes is not registered
 	if not minetest.registered_nodes[under.name] then
 		return
@@ -53,30 +74,20 @@ local function sickle_on_use(itemstack, user, pointed_thing, uses)
 	if not minetest.registered_nodes[above.name] then
 		return
 	end
-	
-	local node = minetest.get_node(pt.under)
+
+	if not sickle_can_break(pt.under, under, user) then
+		return
+	end
 	-- check if something that can be cut using fine tools
 	if minetest.get_item_group(under.name, "snappy") > 0 then
 		-- check if flora but no flower
 		if minetest.get_item_group(under.name, "flora") == 1 and minetest.get_item_group(under.name, "flower") == 0 then
 			-- turn the node into cut grass, wear out item and play sound
 			minetest.set_node(pt.under, {name="dryplants:grass"})
-		else -- otherwise get the drop
-			local inv = user:get_inventory()
-			local name = minetest. get_node(pt.under).name
-			
-			local the_drop = minetest.registered_nodes[name].drop
-			
-			if the_drop ~= nil then
-				if inv:room_for_item("main", the_drop) then
-					inv:add_item("main", the_drop)
-				end
-			else
-				if inv:room_for_item("main", name) then
-					inv:add_item("main", name)
-				end
+		else -- otherwise dig the node
+			if not minetest.node_dig(pt.under, under, user) then
+				return
 			end
-			minetest.remove_node(pt.under)
 		end
 		minetest.sound_play("default_dig_crumbly", {
 			pos = pt.under,
@@ -84,9 +95,12 @@ local function sickle_on_use(itemstack, user, pointed_thing, uses)
 		})
 		itemstack:add_wear(65535/(uses-1))
 		return itemstack
-	elseif string.find(node.name, "default:dirt_with_grass") then
+	elseif string.find(under.name, "default:dirt_with_grass") then
+		if minetest.is_protected(above_pos, user:get_player_name()) or above.name ~= "air" then
+			return
+		end
 		minetest.set_node(pt.under, {name="dryplants:grass_short"})
-		minetest.set_node(pt.above, {name="dryplants:grass"})
+		minetest.set_node(above_pos, {name="dryplants:grass"})
 		minetest.sound_play("default_dig_crumbly", {
 			pos = pt.under,
 			gain = 0.5,
diff --git a/mods/plantlife_modpack/flowers_plus/init.lua b/mods/plantlife_modpack/flowers_plus/init.lua
index 990c393b..788ba2d9 100644
--- a/mods/plantlife_modpack/flowers_plus/init.lua
+++ b/mods/plantlife_modpack/flowers_plus/init.lua
@@ -90,7 +90,7 @@ for i in ipairs(lilies_list) do
 			if place_pos and not minetest.is_protected(place_pos, placer:get_player_name()) then
 
 			local nodename = "default:cobble" -- if this block appears, something went....wrong :-)
-					if place_pos == nil  then return itemstack end -- pour éviter crash avec nénuphare
+
 				if not keys["sneak"] then
 					local node = minetest.get_node(pt.under)
 					local waterlily = math.random(1,8)
diff --git a/mods/plantlife_modpack/mushroom/init.lua b/mods/plantlife_modpack/mushroom/init.lua
index c8952914..71e3ecbe 100644
--- a/mods/plantlife_modpack/mushroom/init.lua
+++ b/mods/plantlife_modpack/mushroom/init.lua
@@ -8,11 +8,11 @@ mushroom = {}
 
 minetest.register_node("mushroom:brown",{
 	description = "Brown Mushroom",
-	drawtype = "plantlike",
+	drawtype = "mesh",
+	mesh = "plantlife_mushroom.obj",
+	tiles = {"mushroom_brown_3d.png"},
 	sunlight_propagates = true,
-	tiles = {"mushroom_brown.png"},
-	inventory_image = "mushroom_brown.png",
-	wield_image = "mushroom_brown.png",
+	inventory_image = "mushroom_brown_inv.png",
 	groups = {oddly_breakable_by_hand=3,attached_node=1},
 	paramtype = "light",
 	walkable = false,
@@ -26,11 +26,11 @@ minetest.register_node("mushroom:brown",{
 
 minetest.register_node("mushroom:red",{
 	description = "Red Mushroom",
-	drawtype = "plantlike",
+	drawtype = "mesh",
+	mesh = "plantlife_mushroom.obj",
+	tiles = {"mushroom_red_3d.png"},
 	sunlight_propagates = true,
-	tiles = {"mushroom_red.png"},
-	inventory_image = "mushroom_red.png",
-	wield_image = "mushroom_red.png",
+	inventory_image = "mushroom_red_inv.png",
 	groups = {oddly_breakable_by_hand=3,attached_node=1},
 	paramtype = "light",
 	walkable = false,
@@ -78,12 +78,12 @@ minetest.register_node("mushroom:spore_red",{
 
 minetest.register_node("mushroom:brown_natural",{
 	description = "Brown Mushroom (Naturally Spawned)",
-	drawtype = "plantlike",
+	drawtype = "mesh",
+	mesh = "plantlife_mushroom.obj",
+	tiles = {"mushroom_brown_3d.png"},
 	sunlight_propagates = true,
-	tiles = {"mushroom_brown.png"},
-	inventory_image = "mushroom_brown.png",
-	wield_image = "mushroom_brown.png",
-	groups = {oddly_breakable_by_hand=3},
+	inventory_image = "mushroom_brown_inv.png",
+	groups = {oddly_breakable_by_hand=3, not_in_creative_inventory=1},
 	paramtype = "light",
 	walkable = false,
 	selection_box = {
@@ -95,12 +95,12 @@ minetest.register_node("mushroom:brown_natural",{
 
 minetest.register_node("mushroom:red_natural",{
 	description = "Red Mushroom (Naturally Spawned)",
-	drawtype = "plantlike",
+	drawtype = "mesh",
+	mesh = "plantlife_mushroom.obj",
+	tiles = {"mushroom_red_3d.png"},
 	sunlight_propagates = true,
-	tiles = {"mushroom_red.png"},
-	inventory_image = "mushroom_red.png",
-	wield_image = "mushroom_red.png",
-	groups = {oddly_breakable_by_hand=3},
+	inventory_image = "mushroom_red_inv.png",
+	groups = {oddly_breakable_by_hand=3, not_in_creative_inventory=1},
 	paramtype = "light",
 	walkable = false,
 	selection_box = {
diff --git a/mods/plantlife_modpack/mushroom/models/plantlife_mushroom.obj b/mods/plantlife_modpack/mushroom/models/plantlife_mushroom.obj
new file mode 100644
index 00000000..bce1ed6e
--- /dev/null
+++ b/mods/plantlife_modpack/mushroom/models/plantlife_mushroom.obj
@@ -0,0 +1,329 @@
+# Blender v2.73 (sub 0) OBJ File: 'plantlife_mushroom.blend'
+# www.blender.org
+o Cylinder
+v 0.261489 -0.177877 -0.000000
+v 0.165972 -0.203714 -0.000000
+v 0.210761 -0.224729 -0.000000
+v 0.258520 -0.211811 -0.000000
+v 0.185335 -0.171215 -0.184553
+v 0.116925 -0.199423 -0.118862
+v 0.148161 -0.219252 -0.151707
+v 0.182366 -0.205148 -0.184553
+v 0.001484 -0.155130 -0.260997
+v -0.001484 -0.189063 -0.168096
+v -0.002969 -0.206030 -0.214547
+v -0.001484 -0.189063 -0.260997
+v -0.182366 -0.139045 -0.184553
+v -0.119894 -0.178704 -0.118862
+v -0.154099 -0.192808 -0.151707
+v -0.185335 -0.172979 -0.184553
+v -0.258520 -0.132382 -0.000000
+v -0.168941 -0.174413 -0.000000
+v -0.216699 -0.187331 -0.000000
+v -0.261489 -0.166316 -0.000000
+v -0.182366 -0.139045 0.184553
+v -0.119894 -0.178704 0.118862
+v -0.154099 -0.192808 0.151707
+v -0.185335 -0.172979 0.184553
+v 0.001484 -0.155130 0.260997
+v -0.001484 -0.189063 0.168096
+v -0.002969 -0.206030 0.214547
+v -0.001484 -0.189063 0.260997
+v 0.185335 -0.171215 0.184553
+v 0.116925 -0.199423 0.118862
+v 0.148161 -0.219252 0.151708
+v 0.182366 -0.205148 0.184553
+v 0.059333 -0.075538 0.000000
+v 0.044915 -0.074277 -0.034942
+v 0.010106 -0.071232 -0.049416
+v -0.024704 -0.068186 -0.034942
+v -0.039122 -0.066925 0.000000
+v -0.024704 -0.068186 0.034942
+v 0.010106 -0.071232 0.049416
+v 0.044915 -0.074277 0.034942
+v 0.004580 -0.119744 -0.206430
+v 0.149993 -0.132466 -0.145968
+v 0.004580 -0.119744 0.206430
+v -0.140833 -0.107022 0.145968
+v 0.210225 -0.137736 -0.000000
+v 0.149993 -0.132466 0.145968
+v -0.201064 -0.101752 -0.000000
+v -0.140833 -0.107022 -0.145968
+v 0.033054 -0.500000 -0.079800
+v 0.025067 -0.177627 -0.060518
+v 0.079800 -0.500000 -0.033054
+v 0.060518 -0.177627 -0.025067
+v 0.079800 -0.500000 0.033054
+v 0.060518 -0.177627 0.025067
+v 0.033054 -0.500000 0.079800
+v 0.025067 -0.177627 0.060518
+v -0.033054 -0.500000 0.079800
+v -0.025067 -0.177627 0.060518
+v -0.079800 -0.500000 0.033054
+v -0.060518 -0.177627 0.025067
+v -0.079800 -0.500000 -0.033054
+v -0.060518 -0.177627 -0.025067
+v -0.033054 -0.500000 -0.079800
+v -0.025067 -0.177627 -0.060518
+v 0.014323 -0.253674 -0.065067
+v 0.012105 -0.382623 -0.072780
+v 0.052438 -0.253674 -0.026952
+v 0.054739 -0.382623 -0.030146
+v 0.052438 -0.253674 0.026952
+v 0.054739 -0.382623 0.030146
+v 0.014323 -0.253674 0.065067
+v 0.012105 -0.382623 0.072780
+v -0.039580 -0.253674 0.065067
+v -0.048187 -0.382623 0.072780
+v -0.077695 -0.253674 0.026952
+v -0.090820 -0.382623 0.030146
+v -0.077695 -0.253674 -0.026952
+v -0.090820 -0.382623 -0.030146
+v -0.039580 -0.253674 -0.065067
+v -0.048187 -0.382623 -0.072780
+vt 0.261010 0.917920
+vt 0.235559 0.983636
+vt 0.016350 0.764426
+vt 0.080814 0.737724
+vt 0.545568 0.235207
+vt 0.764778 0.454417
+vt 0.690996 0.484978
+vt 0.517617 0.311599
+vt 0.235559 0.235207
+vt 0.515845 0.302693
+vt 0.261010 0.302693
+vt 0.578125 0.234375
+vt 0.765625 0.234375
+vt 0.765625 0.312500
+vt 0.578125 0.312500
+vt 0.015625 0.234375
+vt 0.203125 0.234375
+vt 0.203125 0.312500
+vt 0.015625 0.312500
+vt 0.390625 0.312500
+vt 0.578125 0.390625
+vt 0.390625 0.390625
+vt 0.016350 0.454417
+vt 0.080814 0.482889
+vt 0.545569 0.983636
+vt 0.515845 0.917920
+vt 0.099043 0.730173
+vt 0.272422 0.903553
+vt 0.290733 0.368408
+vt 0.490395 0.368408
+vt 0.149550 0.709253
+vt 0.149550 0.509591
+vt 0.764778 0.764426
+vt 0.696041 0.737725
+vt 0.696041 0.482889
+vt 0.099043 0.484978
+vt 0.203125 0.390625
+vt 0.765625 0.390625
+vt 0.272422 0.311599
+vt 0.631577 0.509591
+vt 0.390625 0.234375
+vt 0.517617 0.903553
+vt 0.690996 0.730173
+vt 0.432320 0.675133
+vt 0.473823 0.633629
+vt 0.015625 0.390625
+vt 0.490395 0.850435
+vt 0.290733 0.850435
+vt 0.631577 0.709253
+vt 0.373624 0.533431
+vt 0.332121 0.574934
+vt 0.473823 0.574934
+vt 0.432320 0.533431
+vt 0.332121 0.633630
+vt 0.373624 0.675133
+vt 0.935126 0.767633
+vt 0.998032 0.830539
+vt 0.998032 0.919502
+vt 0.935126 0.982408
+vt 0.846164 0.982408
+vt 0.783257 0.919502
+vt 0.783258 0.830539
+vt 0.846164 0.767633
+vt 0.375000 0.187500
+vt 0.375000 0.031250
+vt 0.500000 0.031250
+vt 0.500000 0.187500
+vt 0.625000 0.031250
+vt 0.625000 0.187500
+vt 0.750000 0.031250
+vt 0.750000 0.187500
+vt 0.875000 0.031250
+vt 0.875000 0.187500
+vt 1.000000 0.031250
+vt 1.000000 0.187500
+vt 0.000000 0.031250
+vt 0.125000 0.031250
+vt 0.125000 0.187500
+vt 0.000000 0.187500
+vt 0.250000 0.031250
+vt 0.250000 0.187500
+vt 0.542224 0.015885
+vt 0.601585 0.075246
+vt 0.601585 0.159195
+vt 0.542224 0.218556
+vt 0.458275 0.218556
+vt 0.398914 0.159195
+vt 0.398914 0.075246
+vt 0.458275 0.015885
+vt 0.625000 0.125000
+vt 0.500000 0.125000
+vt 0.750000 0.125000
+vt 0.875000 0.125000
+vt 1.000000 0.125000
+vt 0.125000 0.125000
+vt 0.000000 0.125000
+vt 0.250000 0.125000
+vt 0.375000 0.125000
+vn -0.147000 -0.987300 0.060400
+vn -0.648700 -0.460200 0.606100
+vn -0.898800 -0.438400 0.000000
+vn -0.172000 -0.985100 0.000000
+vn 0.672500 0.376500 0.637100
+vn 0.935400 0.353500 0.000000
+vn 0.529200 0.848500 0.000000
+vn 0.396700 0.860200 0.320400
+vn -0.044900 -0.513100 -0.857100
+vn 0.558900 -0.565900 -0.606100
+vn -0.026600 -0.997800 -0.060400
+vn -0.086800 -0.992500 -0.085500
+vn -0.044900 -0.513100 0.857100
+vn 0.037800 0.432000 0.901100
+vn -0.596900 0.487600 0.637100
+vn -0.648700 -0.460200 -0.606100
+vn -0.596900 0.487600 -0.637100
+vn 0.037800 0.432000 -0.901100
+vn 0.809000 -0.587800 0.000000
+vn 0.672500 0.376500 -0.637100
+vn -0.147000 -0.987300 -0.060400
+vn -0.086800 -0.992500 0.085500
+vn -0.859800 0.510500 0.000000
+vn -0.372100 0.928200 0.000000
+vn -0.240600 0.916500 -0.319400
+vn -0.085100 -0.972600 0.216400
+vn -0.237500 -0.959200 0.153000
+vn 0.130500 -0.991400 0.000000
+vn 0.067400 -0.985900 0.153000
+vn 0.558900 -0.565900 0.606100
+vn -0.026600 -0.997800 0.060400
+vn -0.001700 -1.000000 0.000000
+vn -0.240600 0.916500 0.319400
+vn 0.077500 0.888400 0.452400
+vn -0.300700 -0.953700 0.000000
+vn 0.077500 0.888400 -0.452400
+vn 0.396700 0.860200 -0.320400
+vn 0.086200 0.978700 -0.186300
+vn 0.217800 0.967000 -0.132200
+vn -0.085100 -0.972600 -0.216400
+vn 0.067400 -0.985900 -0.153000
+vn -0.237500 -0.959200 -0.153000
+vn 0.086200 0.978700 0.186300
+vn -0.044600 0.990300 0.131300
+vn 0.272600 0.962100 0.000000
+vn 0.217800 0.967000 0.132200
+vn -0.098600 0.995100 0.000000
+vn -0.044600 0.990300 -0.131300
+vn -0.273500 -0.626100 -0.730200
+vn -0.402500 0.040600 -0.914500
+vn 0.360300 0.084000 -0.929000
+vn 0.335600 -0.581700 -0.740900
+vn 0.369900 0.027700 -0.928600
+vn 0.921100 -0.031200 -0.388000
+vn 0.913800 0.116800 -0.388800
+vn 0.921100 -0.031200 0.388000
+vn 0.913800 0.116800 0.388800
+vn 0.369900 0.027700 0.928600
+vn 0.360300 0.084000 0.929000
+vn -0.391600 0.105700 0.914000
+vn -0.402500 0.040600 0.914500
+vn -0.914200 0.156600 0.373800
+vn -0.927200 0.012400 0.374500
+vn -0.914200 0.156600 -0.373800
+vn -0.927200 0.012400 -0.374500
+vn -0.391600 0.105700 -0.914000
+vn 0.774400 -0.552100 -0.309000
+vn 0.774400 -0.552100 0.309000
+vn 0.335600 -0.581700 0.740900
+vn -0.273500 -0.626100 0.730200
+vn -0.690800 -0.658600 0.298100
+vn -0.690800 -0.658600 -0.298100
+vn 0.416700 -0.004500 -0.909100
+vn 0.925800 -0.089300 -0.367400
+vn 0.925800 -0.089300 0.367400
+vn 0.416700 -0.004500 0.909100
+vn -0.344300 0.121400 0.931000
+vn -0.896600 0.212200 0.388700
+vn -0.896600 0.212200 -0.388700
+vn -0.344300 0.121400 -0.931000
+s 1
+f 23/1/1 24/2/2 20/3/3 19/4/4
+f 29/5/5 1/6/6 45/7/7 46/8/8
+f 12/9/9 8/5/10 7/10/11 11/11/12
+f 24/12/2 28/13/13 25/14/14 21/15/15
+f 12/16/9 16/17/16 13/18/17 9/19/18
+f 4/20/19 8/15/10 5/21/20 1/22/6
+f 16/23/16 12/9/9 11/11/12 15/24/21
+f 28/25/13 24/2/2 23/1/1 27/26/22
+f 13/2/17 17/3/23 47/27/24 48/28/25
+f 10/29/26 11/11/12 7/10/11 6/30/27
+f 18/31/28 19/4/4 15/24/21 14/32/29
+f 4/6/19 32/33/30 31/34/31 3/35/32
+f 17/3/23 21/23/15 44/36/33 47/27/24
+f 32/18/30 4/20/19 1/22/6 29/37/5
+f 8/5/10 4/6/19 3/35/32 7/10/11
+f 8/15/10 12/14/9 9/38/18 5/21/20
+f 25/9/14 29/5/5 46/8/8 43/39/34
+f 6/30/27 7/10/11 3/35/32 2/40/35
+f 16/17/16 20/41/3 17/20/23 13/18/17
+f 31/34/31 32/33/30 28/25/13 27/26/22
+f 5/33/20 9/25/18 41/42/36 42/43/37
+f 41/42/36 35/44/38 34/45/39 42/43/37
+f 15/24/21 11/11/12 10/29/26 14/32/29
+f 20/41/3 24/12/2 21/15/15 17/20/23
+f 1/6/6 5/33/20 42/43/37 45/7/7
+f 19/4/4 20/3/3 16/23/16 15/24/21
+f 28/19/13 32/18/30 29/37/5 25/46/14
+f 26/47/40 27/26/22 23/1/1 22/48/41
+f 21/23/15 25/9/14 43/39/34 44/36/33
+f 9/25/18 13/2/17 48/28/25 41/42/36
+f 23/1/1 19/4/4 18/31/28 22/48/41
+f 2/40/35 3/35/32 31/34/31 30/49/42
+f 43/39/34 39/50/43 38/51/44 44/36/33
+f 45/7/7 33/52/45 40/53/46 46/8/8
+f 42/43/37 34/45/39 33/52/45 45/7/7
+f 46/8/8 40/53/46 39/50/43 43/39/34
+f 44/36/33 38/51/44 37/54/47 47/27/24
+f 47/27/24 37/54/47 36/55/48 48/28/25
+f 48/28/25 36/55/48 35/44/38 41/42/36
+f 35/44/38 36/55/48 37/54/47 38/51/44 39/50/43 40/53/46 33/52/45 34/45/39
+f 6/56/27 2/57/35 30/58/42 26/59/40 22/60/41 18/61/28 14/62/29 10/63/26
+f 63/64/49 80/65/50 66/66/51 49/67/52
+f 65/66/53 67/68/54 68/69/55 66/67/51
+f 67/68/54 69/70/56 70/71/57 68/69/55
+f 69/70/56 71/72/58 72/73/59 70/71/57
+f 71/72/58 73/74/60 74/75/61 72/73/59
+f 73/76/60 75/77/62 76/78/63 74/79/61
+f 75/77/62 77/80/64 78/81/65 76/78/63
+f 77/80/64 79/65/66 80/64/50 78/81/65
+f 49/82/52 51/83/67 53/84/68 55/85/69 57/86/70 59/87/71 61/88/72 63/89/49
+f 50/66/73 52/68/74 67/90/54 65/91/53
+f 52/68/74 54/70/75 69/92/56 67/90/54
+f 66/66/51 68/68/55 51/69/67 49/67/52
+f 54/70/75 56/72/76 71/93/58 69/92/56
+f 68/68/55 70/70/57 53/71/68 51/69/67
+f 56/72/76 58/74/77 73/94/60 71/93/58
+f 70/70/57 72/72/59 55/73/69 53/71/68
+f 58/76/77 60/77/78 75/95/62 73/96/60
+f 72/72/59 74/74/61 57/75/70 55/73/69
+f 60/77/78 62/80/79 77/97/64 75/95/62
+f 74/76/61 76/77/63 59/78/71 57/79/70
+f 62/80/79 64/65/80 79/98/66 77/97/64
+f 76/77/63 78/80/65 61/81/72 59/78/71
+f 31/34/31 27/26/22 26/47/40 30/49/42
+f 78/80/65 80/65/50 63/64/49 61/81/72
+f 79/98/66 64/65/80 50/66/73 65/91/53
+f 79/65/66 65/66/53 66/67/51 80/64/50
diff --git a/mods/plantlife_modpack/mushroom/textures/mushroom_brown.png b/mods/plantlife_modpack/mushroom/textures/mushroom_brown.png
deleted file mode 100644
index 15f87123..00000000
Binary files a/mods/plantlife_modpack/mushroom/textures/mushroom_brown.png and /dev/null differ
diff --git a/mods/plantlife_modpack/mushroom/textures/mushroom_brown_3d.png b/mods/plantlife_modpack/mushroom/textures/mushroom_brown_3d.png
new file mode 100644
index 00000000..c36f5240
Binary files /dev/null and b/mods/plantlife_modpack/mushroom/textures/mushroom_brown_3d.png differ
diff --git a/mods/plantlife_modpack/mushroom/textures/mushroom_brown_inv.png b/mods/plantlife_modpack/mushroom/textures/mushroom_brown_inv.png
new file mode 100644
index 00000000..c9a7b3c8
Binary files /dev/null and b/mods/plantlife_modpack/mushroom/textures/mushroom_brown_inv.png differ
diff --git a/mods/plantlife_modpack/mushroom/textures/mushroom_red.png b/mods/plantlife_modpack/mushroom/textures/mushroom_red.png
deleted file mode 100644
index 0b83830f..00000000
Binary files a/mods/plantlife_modpack/mushroom/textures/mushroom_red.png and /dev/null differ
diff --git a/mods/plantlife_modpack/mushroom/textures/mushroom_red_3d.png b/mods/plantlife_modpack/mushroom/textures/mushroom_red_3d.png
new file mode 100644
index 00000000..dc80e323
Binary files /dev/null and b/mods/plantlife_modpack/mushroom/textures/mushroom_red_3d.png differ
diff --git a/mods/plantlife_modpack/mushroom/textures/mushroom_red_inv.png b/mods/plantlife_modpack/mushroom/textures/mushroom_red_inv.png
new file mode 100644
index 00000000..796f8674
Binary files /dev/null and b/mods/plantlife_modpack/mushroom/textures/mushroom_red_inv.png differ
diff --git a/mods/plantlife_modpack/nature_classic/global_function.lua b/mods/plantlife_modpack/nature_classic/global_function.lua
index 592005a6..45e567f0 100644
--- a/mods/plantlife_modpack/nature_classic/global_function.lua
+++ b/mods/plantlife_modpack/nature_classic/global_function.lua
@@ -43,10 +43,7 @@ end
 
 function nature:grow_node(pos, nodename)
     if pos ~= nil then
-        if not minetest.get_node_light(pos, nil) or not nature.minimum_growth_light then return end
-	-- FIXME: WARN VANESSAE, OR MAYBE IT IS A MISSING CONFIGURATION'S PARAMETER
-
-	local light_enough = minetest.get_node_light(pos, nil)
+        local light_enough = (minetest.get_node_light(pos, nil) or 0)
                 >= nature.minimum_growth_light 
 
         if is_not_young(pos) and light_enough then
diff --git a/mods/plantlife_modpack/API.txt b/mods/plantlife_modpack/plants_lib/API.txt
similarity index 53%
rename from mods/plantlife_modpack/API.txt
rename to mods/plantlife_modpack/plants_lib/API.txt
index 8075865f..8f6455ca 100644
--- a/mods/plantlife_modpack/API.txt
+++ b/mods/plantlife_modpack/plants_lib/API.txt
@@ -1,6 +1,6 @@
 This document describes the Plantlife mod API.
 
-Last revision: 2014-05-24
+Last revision: 2015-02-16
 
 
 =========
@@ -64,9 +64,9 @@ biome = {
 	spawn_delay = number,	-- same as sdelay, above.
 	spawn_chance = number,	-- same as schance, above.
 	spawn_surfaces = {table}, -- List of node names on which the plants
-				-- should be spawned.  As with the single-
-				-- node "ssurface" option in the legacy API,
-				-- you should not put stone, air, etc. here.
+				-- should be spawned.  As with the single-node "ssurface"
+				-- option in the legacy API, you should not put stone, air,
+				-- etc. here.
 
 	---- From here down are a number of optional parameters.  You will
 	---- most likely want to use at least some of these to limit how and
@@ -74,151 +74,132 @@ biome = {
 
 	avoid_nodes = {table},	-- same meaning as savoid, above
 	avoid_radius = num,	-- same as sradius
-	seed_diff = num,	-- The Perlin seed difference value passed to
-				-- the minetest.get_perlin() function.
-				-- Used along with the global Perlin controls
-				-- below to create the "biome" in which the
-				-- plants will spawn.  Defaults to 0 if not
-				-- provided.
-	light_min = num,	-- Minimum amount of light necessary to make a
-				-- plant spawn.  Defaults to 0.
-	light_max = num,	-- Maximum amount of light needed to spawn. 
-				-- Defaults to the engine's MAX_LIGHT value of
-				-- 14.
-	neighbors = {table},	-- List of neighboring nodes that need to be
-				-- immediately next to the node the plant is
-				-- about to spawn on. Can also be a string
-				-- with a single node name.  It is both passed
-				-- to the ABM as the "neighbors" parameter,
-				-- and is used to manually check the 
-				-- adjacent nodes.  It only takes one of these
-				-- for the spawn routine to mark the target as
-				-- spawnable.  Defaults to nil (ignored).
-	ncount = num,		-- There must be at least this many of the
-				-- above neighbors in the eight spaces
-				-- immediately surrounding the node the plant
-				-- is about to spawn on for it to happen.  If
-				-- not provided, this check is disabled.
-	facedir = num,		-- The value passed to the param2 variable
-				-- when adding the node to the map.  Defaults
-				-- to 0.  Be sure that the value you use here
-				-- (and the range thereof) is appropriate for
-				-- the type of node you're spawning.
-	random_facedir = {table}, -- If set, the table should contain two
-				-- values. If they're both provided, the
-				-- spawned plant will be given a random
-				-- facedir value in the range specified by
-				-- these two numbers.  Overrides the facedir
-				-- parameter above, if it exists.  Use {0,3}
-				-- if you want the full range for wallmounted
-				-- nodes, or {2,5} for most everything else,
-				-- or any other pair of numbers in the 0 to 5 
-				-- range, as appropriate for the node you want
-				-- to spawn.
-	verticals_list = {table}, -- List of nodes that should be considered
-				-- to be natural walls.
-	alt_wallnode = "string", -- If specified, this node will be 
-				-- substituted in place of the plant(s)
-				-- defined by spawn_plants above, if the spawn
-				-- target has one or more adjacent walls.  In
-				-- such a case, the two above facedir
-				-- parameters will be ignored.
-	depth_max = num,	-- If the object spawns on top of a water
-				-- source, the water must be at most this
-				-- deep.  Defaults to 1 node.
-	min_elevation = num,	-- Surface must be at this altitude or higher
-				-- to spawn at all.  Defaults to -31000...
-	max_elevation = num,	-- ...but must be no higher than this
-				-- altitude.  Defaults to +31000.
-	near_nodes = {table},	-- List of nodes that must be somewhere in the
-				-- vicinity in order for the plant to spawn.
-				-- Can also be a string with a single node
-				-- name.  If not provided, this check is
-				-- disabled.
+	seed_diff = num,	-- The Perlin seed difference value passed to the
+						-- minetest.get_perlin() function.  Used along with
+						-- the global Perlin controls below to create the
+						-- "biome" in which the plants will spawn.  Defaults
+						-- to 0 if not provided.
+	light_min = num,	-- Minimum amount of light necessary to make a plant
+						-- spawn.  Defaults to 0.
+	light_max = num,	-- Maximum amount of light needed to spawn.  Defaults
+						-- to the engine's MAX_LIGHT value of 14.
+	neighbors = {table}, -- List of neighboring nodes that need to be
+						-- immediately next to the node the plant is about to
+						-- spawn on. Can also be a string with a single node
+						-- name.  It is both passed to the ABM as the
+						-- "neighbors" parameter, and is used to manually
+						-- check the adjacent nodes.  It only takes one of
+						-- these for the spawn routine to mark the target as
+						-- spawnable.  Defaults to nil (ignored).
+	ncount = num,		-- There must be at least this many of the above
+						-- neighbors in the eight spaces immediately
+						-- surrounding the node the plant is about to spawn on
+						-- for it to happen.  If not provided, this check is
+						-- disabled.
+	facedir = num,		-- The value passed to the param2 variable when adding
+						-- the node to the map.  Defaults to 0.  Be sure that
+						-- the value you use here (and the range thereof) is
+						-- appropriate for the type of node you're spawning.
+	random_facedir = {table}, -- If set, the table should contain two values.
+						-- If they're both provided, the spawned plant will be
+						-- given a random facedir value in the range specified
+						-- by these two numbers.  Overrides the facedir
+						-- parameter above, if it exists.  Use {0,3} if you
+						-- want the full range for wallmounted nodes, or {2,5}
+						-- for most everything else, or any other pair of
+						-- numbers appropriate for the node you want to spawn.
+	depth_max = num,	-- If the object spawns on top of a water source, the
+						-- water must be at most this deep.  Defaults to 1.
+	min_elevation = num, -- Surface must be at this altitude or higher to
+						-- spawn at all.  Defaults to -31000...
+	max_elevation = num, -- ...but must be no higher than this altitude.
+						-- Defaults to +31000.
+	near_nodes = {table}, -- List of nodes that must be somewhere in the
+						-- vicinity in order for the plant to spawn. Can also
+						-- be a string with a single node name.  If not
+						-- provided, this check is disabled.
 	near_nodes_size = num,	-- How large of an area to check for the above
-				-- node.  Specifically, this checks a flat
-				-- horizontal area centered on the node to be
-				-- spawned on.  Defaults to 0, but is ignored
-				-- if the above near_nodes value is not set.
-	near_nodes_vertical = num, -- Used with the size value above, this
-				-- extends the vertical range of the near 
-				-- nodes search.  Basically, this turns the
-				-- flat region described above into a cuboid
-				-- region.  The area to be checked will extend
-				-- this high AND this low above/below the
-				-- target node, centered thereon.  Defaults to
-				-- 1 (check only the layer above, the layer
-				-- at, and the layer below the target node),
-				-- but is ignored if near_nodes is not set.
-	near_nodes_count = num,	-- How many of the above nodes must be within
-				-- that radius.	Defaults to 1 but is ignored
-				-- if near_nodes isn't set.  Bear in mind that
-				-- the total area to be checked is equal to
-				-- (near_nodes_size^2)*near_nodes_vertical*2.
-				-- so for example, if size is 10 and vertical
-				-- is 4 then the area is (10^2)*8 = 800 nodes
-				-- in size, so you'll want to make sure you
-				-- specify a value appropriate for the amount
-				-- in question.
-	air_size = num,		-- How large of an area to check for air
-				-- above and around the target.  If omitted,
-				-- only the space above the target is checked.
-				-- This does not check for air at the sides or
-				-- below the target.
-	air_count = num,	-- How many of the surrounding nodes need to
-				-- be air for the above check to return true.
-				-- If omitted, only the space above the target
-				-- is checked.
-	plantlife_limit = num,	-- The value compared against the generic
-				-- "plants can grow here" Perlin noise layer.
-				-- Smaller numbers result in more abundant
-				-- plants.  Range of -1 to +1, with values in 
-				-- the range of about 0 to 0.5 being most
-				-- useful.  Defaults to 0.1.
-	temp_min = num,		-- Minimum temperature needed for the desired
-				-- object to spawn.  This is a 2d Perlin
-				-- value, which has an inverted range of +1 to
-				-- -1.  Larger values represent *colder*
-				-- temperatures, so this value is actually the
-				-- upper end of the desired Perlin range.  See
-				-- the temperature map section at the bottom
-				-- of this document for details on how these
-				-- values work.  Defaults to +1 (unlimited
-				-- coldness).
-	temp_max = num,		-- Maximum temperature/lower end of the Perlin
-				-- range.  Defaults to -1 (unlimited heat).
-	humidity_min = num,	-- Minimum humidity for the plant to spawn in.
-				-- Like the temperature map, this is a Perlin
-				-- value where lower numbers mean more
-				-- humidity in the area.  Defaults to +1 (0%
-				-- relative humidity).
+						-- node.  Specifically, this checks a flat, horizontal
+						-- area centered on the node to be spawned on.
+						-- Defaults to 0, but is ignored if the above
+						-- near_nodes value is not set.
+	near_nodes_vertical = num, -- Used with the size value above, this extends
+						-- the vertical range of the near nodes search.
+						-- Basically, this turns the flat region described
+						-- above into a cuboid region.  The area to be checked
+						-- will extend this high and this low above/below the
+						-- target node, centered thereon.  Defaults to 1 (only
+						-- check the layer above, the layer at, and the layer
+						-- below the target node), but is ignored if
+						-- near_nodes is not set.
+	near_nodes_count = num,	-- How many of the above nodes must be within that
+						-- radius.  Defaults to 1 but is ignored if near_nodes
+						-- isn't set.  Bear in mind that the total area to be
+						-- checked is equal to:
+						-- (near_nodes_size^2)*near_nodes_vertical*2 
+						-- For example, if size is 10 and vertical is 4, then
+						-- the area is (10^2)*8 = 800 nodes in size, so you'll
+						-- want to make sure you specify a value appropriate
+						-- for the size of the area being tested.
+	air_size = num,		-- How large of an area to check for air above and
+						-- around the target.  If omitted, only the space
+						-- above the target is checked.  This does not check
+						-- for air at the sides or below the target.
+	air_count = num,	-- How many of the surrounding nodes need to be air
+						-- for the above check to return true. If omitted,
+						-- only the space above the target is checked.
+	plantlife_limit = num, -- The value compared against the generic "plants
+						-- can grow here" Perlin noise layer. Smaller numbers
+						-- result in more abundant plants.  Range of -1 to +1,
+						-- with values in the range of about 0 to 0.5 being
+						-- most useful.  Defaults to 0.1.
+	temp_min = num,		-- Minimum temperature needed for the desired object
+						-- to spawn.  This is a 2d Perlin value, which has an
+						-- inverted range of +1 to -1.  Larger values
+						-- represent *colder* temperatures, so this value is
+						-- actually the upper end of the desired Perlin range.
+						-- See the temperature map section at the bottom of
+						-- this document for details on how these values work.
+						-- Defaults to +1 (unlimited coldness).
+	temp_max = num,		-- Maximum temperature/lower end of the Perlin range.
+						-- Defaults to -1 (unlimited heat).
+	humidity_min = num,	-- Minimum humidity for the plant to spawn in. Like
+						-- the temperature map, this is a Perlin value where
+						-- lower numbers mean more humidity in the area.
+						-- Defaults to +1 (0% humidity).
 	humidity_max = num,	-- Maximum humidity for the plant to spawn at.
-				-- Defaults to -1 (100% humidity).
-	spawn_on_side = bool,	-- Set this to true to spawn the node on one
-				-- side of the target node rather than the
-				-- top.  The code will search for an airspace
-				-- to the side of the target, then spawn the
-				-- plant at the first one found.  The above
-				-- facedir and random_facedir parameters are
-				-- ignored in this case.  If the above
-				-- parameters for selecting generic wall nodes
-				-- are provided, this option is ignored.
-				-- Important note: the facedir values assigned
-				-- by this option only make sense with
-				-- wallmounted nodes (nodes which don't use
-				-- facedir won't be affected).
+						-- Defaults to -1 (100% humidity).
+	verticals_list = {table}, -- List of nodes that should be considered to be
+						-- natural walls.
+	alt_wallnode = "string", -- If specified, this node will be substituted in
+						-- place of the plant(s) defined by spawn_plants
+						-- above, if the spawn target has one or more adjacent
+						-- walls.  In such a case, the two above facedir
+						-- parameters will be ignored.
+	spawn_on_side = bool, -- Set this to true to immediately spawn the node on
+						-- one side of the target node rather than the top.
+						-- The code will search for an airspace to the side of
+						-- the target, then spawn the plant at the first one
+						-- found.  The above facedir and random_facedir
+						-- parameters are ignored in this case.  If the above
+						-- parameters for selecting generic wall nodes are
+						-- provided, this option is ignored.  Important note:
+						-- the facedir values assigned by this option only
+						-- make sense with wallmounted nodes (nodes which
+						-- don't use facedir won't be affected).
+	choose_random_wall = bool, -- if set to true, and searching for walls is
+						-- being done, just pick any random wall if there is
+						-- one, rather than returning the first one.
 	spawn_on_bottom = bool,	-- If set to true, spawn the object below the
-				-- target node instead of above it.  The above
-				-- spawn_on_side variable takes precedence
-				-- over this one if both happen to be true.
-				-- When using this option with the random
-				-- facedir function above, the values given to
-				-- the facedir parameter are for regular
-				-- nodes, not wallmounted.
-	spawn_replace_node = bool, -- If set to true, the target node itself
-				-- is replaced by the spawned object.
-				-- Overrides the spawn_on_bottom and
-				-- spawn_on_side settings.
+						-- target node instead of above it.  The above
+						-- spawn_on_side variable takes precedence over this
+						-- one if both happen to be true. When using this
+						-- option with the random facedir function above, the
+						-- values given to the facedir parameter are for
+						-- regular nodes, not wallmounted.
+	spawn_replace_node = bool, -- If set to true, the target node itself is
+						-- replaced by the spawned object.  Overrides the
+						-- spawn_on_bottom and spawn_on_side settings.
 }
 
 [*] spawn_plants must be either a table or a string.  If it's a table, the
@@ -250,87 +231,78 @@ here than are available in the ABM-based spawner, as some stuff doesn't make
 sense at map-generation time.
 
 biome = {
-	surface = something,	-- What node(s).  May be a string such as
-				-- "default:dirt_with_grass" or a table with
-				-- multiple such entries.
+	surface = something, -- What node(s).  May be a string such as
+						-- "default:dirt_with_grass" or a table with
+						-- multiple such entries.
 
 	---- Everything else is optional, but you'll definitely want to use
 	---- some of these other fields to limit where and under what
 	---- conditions the objects are spawned.
 	
-	below_nodes = {table},	-- List of nodes that must be below the target
-				-- node.  Useful in snow biomes to keep
-				-- objects from spawning in snow that's on the
-				-- wrong surface for that object.
-	avoid_nodes = {table},	-- List of nodes to avoid when spawning.
-				-- Groups are not supported here.
-	avoid_radius = num,	-- how much distance to leave between the
-				-- object to be added and the objects to be
-				-- avoided.  If this or the avoid_nodes value
-				-- is nil or omitted, this check is skipped.
-				-- Avoid using excessively large radii or you
-				-- will slow down the map generator.
-	rarity = num,		-- how rare should this object be in its
-				-- biome? Larger values make objects more
-				-- rare, via:  math.random(1,100) > this
-	max_count = num,	-- The absolute maximum number of your object
-				-- that should be allowed to spawn in a 5x5x5
-				-- mapblock area (80x80x80 nodes).  Defaults
-				-- to 5, but be sure you set this to some 
-				-- reasonable value depending on your object
-				-- and its size if 5 is insufficient.
-	seed_diff = num,	-- perlin seed-diff value.  Defaults to 0, 
-				-- which causes the function to inherit the
-				-- global value of 329.
-	neighbors = {table},	-- What ground nodes must be right next to and
-				-- at the same elevation as the node to be
-				-- spawned on.
-	ncount = num,		-- at least this many of the above nodes must
-				-- be next to the node to spawn on.  Any value
-				-- greater than 8 will probably cause the code
-				-- to never spawn anything.  Defaults to 0.
-	depth = num,		-- how deep/thick of a layer the spawned-on
-				-- node must be.  Typically used for water.
-	min_elevation = num,	-- minimum elevation in meters/nodes.
-				-- Defaults to -31000 (unlimited).
-	max_elevation = num,	-- maximum elevation.  Defaults to +31000
-				-- (unlimited).
-	near_nodes = {table},	-- what nodes must be in the general vicinity
-				-- of the object being spawned.
-	near_nodes_size = num,	-- how wide of a search area to look for 
-				-- the nodes in that list.
-	near_nodes_vertical = num, -- How high/low of an area to search from
-				-- the target node.
-	near_nodes_count = num,	-- at least this many of those nodes must be
-				-- in the area.
-	plantlife_limit = num,	-- The value compared against the generic
-				-- "plants can grow here" Perlin noise layer.
-				-- Smaller numbers result in more abundant
-				-- plants.  Range of -1 to +1, with values in 
-				-- the range of about 0 to 0.5 being most
-				-- useful.  Defaults to 0.1.
-	temp_min = num,		-- coldest allowable temperature for a plant
-				-- to spawn (that is, the highest Perlin
-				-- temperature map value).
-	temp_max = num,		-- warmest allowable temperature to spawn a
-				-- plant (lowest Perlin temperature value).
-	verticals_list = {table}, -- Same as with the spawn_on_surfaces
-				-- function.
-	check_air = bool,	-- Flag to tell the mapgen code to check for
-				-- air above the spawn target.  Defaults to
-				-- true if not explicitly set to false.
-	delete_above = bool,	-- Flag to tell the mapgen code to delete the
-				-- two nodes directly above the spawn target
-				-- just before adding the plant or tree.
-				-- Useful when generating in snow biomes.
-				-- Defaults to false.
+	below_nodes = {table}, -- List of nodes that must be below the target
+						-- node.  Useful in snow biomes to keep objects from
+						-- spawning in snow that's on the wrong surface for
+						-- that object.
+	avoid_nodes = {table}, -- List of nodes to avoid when spawning. Groups are
+						-- not supported here.
+	avoid_radius = num,	-- How much distance to leave between the object to be
+						-- added and the objects to be avoided.  If this or
+						-- the avoid_nodes value is nil/omitted, this check is
+						-- skipped.  Avoid using excessively large radii.
+	rarity = num,		-- How rare should this object be in its biome? Larger
+						-- values make objects more rare, via:
+						-- math.random(1,100) > this
+	max_count = num,	-- The absolute maximum number of your object that
+						-- should be allowed to spawn in a 5x5x5 mapblock area
+						-- (80x80x80 nodes).  Defaults to 5, but be sure you
+						-- set this to some reasonable value depending on your
+						-- object and its size if 5 is insufficient.
+	seed_diff = num,	-- Perlin seed-diff value.  Defaults to 0, which
+						-- causes the function to inherit the global value of
+						-- 329.
+	neighbors = {table}, -- What ground nodes must be right next to and at the
+						-- same elevation as the node to be spawned on.
+	ncount = num,		-- At least this many of the above nodes must be next
+						-- to the node to spawn on.  Any value greater than 8
+						-- will probably cause the code to never spawn
+						-- anything.  Defaults to 0.
+	depth = num,		-- How deep/thick of a layer the spawned-on node must
+						-- be.  Typically used for water.
+	min_elevation = num, -- Minimum elevation in meters/nodes.  Defaults to
+						-- -31000 (unlimited).
+	max_elevation = num, -- Max elevation.  Defaults to +31000 (unlimited).
+	near_nodes = {table}, -- what nodes must be in the general vicinity of the
+						-- object being spawned.
+	near_nodes_size = num, -- how wide of a search area to look for the nodes
+						-- in that list.
+	near_nodes_vertical = num, -- How high/low of an area to search from the
+						-- target node.
+	near_nodes_count = num,	-- at least this many of those nodes must be in
+						-- the area.
+	plantlife_limit = num, -- The value compared against the generic "plants
+						-- can grow here" Perlin noise layer.  Smaller numbers
+						-- result in more abundant plants.  Range of -1 to +1,
+						-- with values in the range of about 0 to 0.5 being
+						-- most useful.  Defaults to 0.1.
+	temp_min = num,		-- Coldest allowable temperature for a plant to spawn
+						-- (that is, the largest Perlin value).
+	temp_max = num,		-- warmest allowable temperature to spawn a plant
+						-- (lowest Perlin value).
+	verticals_list = {table}, -- Same as with the spawn_on_surfaces function.
+	check_air = bool,	-- Flag to tell the mapgen code to check for air above
+						-- the spawn target.  Defaults to true if not
+						-- explicitly set to false.  Set this to false VERY
+						-- SPARINGLY, as it will slow the map generator down.
+	delete_above = bool, -- Flag to tell the mapgen code to delete the two
+						-- nodes directly above the spawn target just before
+						-- adding the plant or tree.  Useful when generating
+						-- in snow biomes.  Defaults to false.
 	delete_above_surround = bool, -- Flag to tell the mapgen code to also
-				-- delete the four nodes surrounding the above
-				-- space, and the four nodes above those,
-				-- resulting in a two-node-deep cross-shaped
-				-- empty region above the spawn target.
-				-- Useful when adding trees to snow biomes.
-				-- Defaults to false.
+						-- delete the five nodes surrounding the above space,
+						-- and the five nodes above those, resulting in a two-
+						-- node-deep cross-shaped empty region above/around
+						-- the spawn target.  Useful when adding trees to snow
+						-- biomes.  Defaults to false.
 	spawn_replace_node = bool, -- same as with the ABM spawner.
 	random_facedir = {table}, -- same as with the ABM spawner.
 }
@@ -370,61 +342,53 @@ into something else over time.  This function has no return value, and accepts
 a biome definition table as the only parameter.  These are defined like so:
 
 options = {
-	grow_plant = "string",	-- Name of the node to be grown into something
-				-- else.  This value is passed to the ABM as
-				-- the "nodenames" parameter, so it is the
-				-- plants themselves that are the ABM trigger,
-				-- rather than the ground they spawned on.  A
-				-- plant will only grow if the node above it
-				-- is air.  Can also be a table, but note that
-				-- all nodes referenced therein will be grown
-				-- into the same object.
-	grow_delay = num,	-- Passed as the ABM "interval" parameter, as
-				-- with spawning.
+	grow_plant = "string", -- Name of the node to be grown into something
+						-- else.  This value is passed to the ABM as the
+						-- "nodenames" parameter, so it is the plants
+						-- themselves that are the ABM trigger, rather than
+						-- the ground they spawned on.  A plant will only grow
+						-- if the node above it is air.  Can also be a table,
+						-- but note that all nodes referenced therein will be
+						-- grown into the same object.
+	grow_delay = num,	-- Passed as the ABM "interval" parameter, as with
+						-- spawning.
 	grow_chance = num,	-- Passed as the ABM "chance" parameter.
 	grow_result = "string",	-- Name of the node into which the grow_plant
-				-- node(s) should transform when the ABM
-				-- executes.
+						-- node(s) should transform when the ABM executes.
 
 	---- Everything from here down is optional.
 
 	dry_early_node = "string", -- This value is ignored except for jungle
-				-- grass (a corner case needed by that mod),
-				-- where it indicates which node the grass
-				-- must be on in order for it to turn from
-				-- the short size to "default:dry_shrub"
-				-- instead of the medium size.
-	grow_nodes = {table},	-- One of these nodes must be under the plant
-				-- in order for it to grow at all.  Normally
-				-- this should be the same as the list of 
-				-- surfaces passed to the spawning ABM as the
-				-- "nodenames" parameter.  This is so that the
-				-- plant can be manually placed on something
-				-- like a flower pot or something without it
-				-- growing and eventually dieing.  Defaults to
-				-- "default:dirt_with_grass".
+						-- grass (a corner case needed by that mod), where it
+						-- indicates which node the grass must be on in order
+						-- for it to turn from the short size to
+						-- "default:dry_shrub" instead of the medium size.
+	grow_nodes = {table}, -- One of these nodes must be under the plant in
+						-- order for it to grow at all.  Normally this should
+						-- be the same as the list of surfaces passed to the
+						-- spawning ABM as the "nodenames" parameter.  This is
+						-- so that the plant can be manually placed on
+						-- something like a flower pot or something without it
+						-- necessarily growing and perhaps dieing.  Defaults
+						-- to "default:dirt_with_grass".
 	facedir = num,		-- Same as with spawning a plant.
-	need_wall = bool,	-- Set this to true if you the plant needs to
-				-- grow against a wall.  Defaults to false.
-	verticals_list = {table}, -- List of nodes that should be considered
-				-- to be wall surfaces when growing the plant
-				-- vertically.  If not provided, the walls
-				-- check is skipped.
+	need_wall = bool,	-- Set this to true if you the plant needs to grow
+						-- against a wall.  Defaults to false.
+	verticals_list = {table}, -- same as with spawning a plant.
+	choose_random_wall = bool, -- same as with spawning a plant.
 	grow_vertically = bool,	-- Set this to true if the plant needs to grow
-				-- vertically, as in climbing poison ivy.
-				-- Defaults to false.
-	height_limit = num,	-- Set this to limit how tall the desired node
-				-- can grow.  The mod will search straight
-				-- down from the position being spawned at to
-				-- find a ground node, set via the parameter
-				-- below. Defaults to 5 nodes.
-	ground_nodes = {table},	-- What nodes should be treated as "the
-				-- ground" below a vertically-growing plant.
-				-- Usually this should be the same as the
-				-- grow_nodes table, but might also include,
-				-- for example, water or some other
-				-- surrounding material.  Defaults to
-				-- "default:dirt_with_grass".
+						-- vertically, as in climbing poison ivy. Defaults to
+						-- false.
+	height_limit = num,	-- Set this to limit how tall the desired node can
+						-- grow.  The mod will search straight down from the
+						-- position being spawned at to find a ground node,
+						-- set via the field below. Defaults to 5 nodes.
+	ground_nodes = {table},	-- What nodes should be treated as "the ground"
+						-- below a vertically-growing plant. Usually this
+						-- should be the same as the grow_nodes table, but
+						-- might also include, for example, water or some
+						-- other surrounding material.  Defaults to
+						-- "default:dirt_with_grass".
 	grow_function = something, -- [*] see below.
 	seed_diff = num,	-- [*] see below.
 }
@@ -457,13 +421,16 @@ and grow_result is ignored.
 
 
 =====
-find_adjacent_wall(pos, verticals)
+find_adjacent_wall(pos, verticals, randomflag)
 
 Of the few helper functions, this one expects a position parameter and a table
 with the list of nodes that should be considered as walls.  The code will
 search around the given position for a neighboring wall, returning the first
 one it finds as a facedir value, or nil if there are no adjacent walls.
 
+If randomflag is set to true, the function will just return the facedir of any
+random wall it finds adjacent to the target position.  Defaults to false if 
+not specified.
 
 =====
 is_node_loaded(pos)
@@ -490,11 +457,11 @@ call the usual spawn_tree() functions.  This rerouting exists as a way for
 other mods to hook into plants_lib's tree-growing functions in general,
 perhaps to execute something extra whenever a tree is spawned.
 
-plantslib:generate_tree(pos, treemodel) is called any time a
-tree is spawned at map generation time.  'pos' is the position of the block on
-which the tree is to be placed.  'treemodel' is the standard L-Systems tree
-definition table expected by the spawn_tree() function.  Refer to the 'trunk'
-field in that table to derive the name of the tree being spawned.
+plantslib:generate_tree(pos, treemodel) is called any time a tree is spawned
+at map generation time.  'pos' is the position of the block on which the tree
+is to be placed.  'treemodel' is the standard L-Systems tree definition table
+expected by the spawn_tree() function.  Refer to the 'trunk' field in that
+table to derive the name of the tree being spawned.
 
 plantslib:grow_tree(pos, treemodel) does the same sort of thing whenever a 
 tree is spawned within the abm-based growing code, for example when growing a
diff --git a/mods/plantlife_modpack/plants_lib/init.lua b/mods/plantlife_modpack/plants_lib/init.lua
index dba332be..fc7bf172 100644
--- a/mods/plantlife_modpack/plants_lib/init.lua
+++ b/mods/plantlife_modpack/plants_lib/init.lua
@@ -483,7 +483,7 @@ function plantslib:spawn_on_surfaces(sd,sp,sr,sc,ss,sa)
 				  and pos.y >= biome.min_elevation
 				  and pos.y <= biome.max_elevation
 				  then
-					local walldir = plantslib:find_adjacent_wall(p_top, biome.verticals_list)
+					local walldir = plantslib:find_adjacent_wall(p_top, biome.verticals_list, biome.choose_random_wall)
 					if biome.alt_wallnode and walldir then
 						if n_top.name == "air" then
 							minetest.set_node(p_top, { name = biome.alt_wallnode, param2 = walldir })
@@ -555,7 +555,7 @@ function plantslib:grow_plants(opts)
 			local root_node = minetest.get_node({x=pos.x, y=pos.y-options.height_limit, z=pos.z})
 			local walldir = nil
 			if options.need_wall and options.verticals_list then
-				walldir = plantslib:find_adjacent_wall(p_top, options.verticals_list)
+				walldir = plantslib:find_adjacent_wall(p_top, options.verticals_list, options.choose_random_wall)
 			end
 			if n_top.name == "air" and (not options.need_wall or (options.need_wall and walldir))
 			  then
@@ -612,12 +612,24 @@ end
 -- function to decide if a node has a wall that's in verticals_list{}
 -- returns wall direction of valid node, or nil if invalid.
 
-function plantslib:find_adjacent_wall(pos, verticals)
+function plantslib:find_adjacent_wall(pos, verticals, randomflag)
 	local verts = dump(verticals)
-	if string.find(verts, minetest.get_node({ x=pos.x-1, y=pos.y, z=pos.z   }).name) then return 3 end
-	if string.find(verts, minetest.get_node({ x=pos.x+1, y=pos.y, z=pos.z   }).name) then return 2 end
-	if string.find(verts, minetest.get_node({ x=pos.x  , y=pos.y, z=pos.z-1 }).name) then return 5 end
-	if string.find(verts, minetest.get_node({ x=pos.x  , y=pos.y, z=pos.z+1 }).name) then return 4 end
+	if randomflag then
+		local walltab = {}
+		
+		if string.find(verts, minetest.get_node({ x=pos.x-1, y=pos.y, z=pos.z   }).name) then walltab[#walltab + 1] = 3 end
+		if string.find(verts, minetest.get_node({ x=pos.x+1, y=pos.y, z=pos.z   }).name) then walltab[#walltab + 1] = 2 end
+		if string.find(verts, minetest.get_node({ x=pos.x  , y=pos.y, z=pos.z-1 }).name) then walltab[#walltab + 1] = 5 end
+		if string.find(verts, minetest.get_node({ x=pos.x  , y=pos.y, z=pos.z+1 }).name) then walltab[#walltab + 1] = 4 end
+
+		if #walltab > 0 then return walltab[math.random(1, #walltab)] end
+
+	else
+		if string.find(verts, minetest.get_node({ x=pos.x-1, y=pos.y, z=pos.z   }).name) then return 3 end
+		if string.find(verts, minetest.get_node({ x=pos.x+1, y=pos.y, z=pos.z   }).name) then return 2 end
+		if string.find(verts, minetest.get_node({ x=pos.x  , y=pos.y, z=pos.z-1 }).name) then return 5 end
+		if string.find(verts, minetest.get_node({ x=pos.x  , y=pos.y, z=pos.z+1 }).name) then return 4 end
+	end
 	return nil
 end
 
diff --git a/mods/plantlife_modpack/trunks/nodes.lua b/mods/plantlife_modpack/trunks/nodes.lua
index 4f76695b..48635664 100644
--- a/mods/plantlife_modpack/trunks/nodes.lua
+++ b/mods/plantlife_modpack/trunks/nodes.lua
@@ -29,7 +29,9 @@ for i in pairs(NoDe) do
 		buildable_to = true,
 		node_box = {type = "fixed", fixed = flat_stick},
 		groups = {
-			dig_immediate=3, -- almost literally immediate, like just picking up
+			choppy=2,
+			oddly_breakable_by_hand=2,
+			flammable=3,
 			attached_node=1,
 			not_in_creative_inventory=iNV
 		},
@@ -67,7 +69,7 @@ minetest.register_node("trunks:moss", {
 	walkable = false,
 	node_box = {type = "fixed", fixed = flat_moss},
 	selection_box = {type = "fixed", fixed = flat_stick},--{type = "wallmounted"},
-	groups = {dig_immediate=2--[[,attached_node=1]]}, -- falling moss is too annoying
+	groups = {snappy = 3, flammable = 3 },
 	sounds = default.node_sound_leaves_defaults(),
 })
 
@@ -86,7 +88,7 @@ minetest.register_node("trunks:moss_fungus", {
 	walkable = false,
 	node_box = {type = "fixed", fixed = flat_moss},
 	selection_box = {type = "fixed", fixed = flat_stick},--{type = "wallmounted"},
-	groups = {dig_immediate=2--[[,attached_node=1]]}, -- falling moss is too annoying
+	groups = {snappy = 3, flammable = 3 },
 	sounds = default.node_sound_leaves_defaults(),
 })
 
diff --git a/mods/plantlife_modpack/vines/LICENSE.md b/mods/plantlife_modpack/vines/LICENSE.md
new file mode 100644
index 00000000..fb677883
--- /dev/null
+++ b/mods/plantlife_modpack/vines/LICENSE.md
@@ -0,0 +1,4 @@
+License
+=======
+- Code	WTFPL
+- Texture	CC
diff --git a/mods/plantlife_modpack/vines/README.md b/mods/plantlife_modpack/vines/README.md
new file mode 100644
index 00000000..89fdb270
--- /dev/null
+++ b/mods/plantlife_modpack/vines/README.md
@@ -0,0 +1,56 @@
+# Vines
+
+## Features
+- Rope block for spawning rope that slowly drops into the deep.
+- Vines are climbable and slowly grow downward.
+- Shears that allow the collecting of vines.
+- Spawns vines on jungletree leaves.
+- Roots on the bottom of dirt and dirt with grass nodes.
+- Spawns vines on trees located in swampy area.
+- Jungle vines that spawn on the side of jungletrees
+
+## API
+The API is very minimal. It allows the registering of vines and the spawning of
+existing vines on nodes of your own.
+
+If you want vines to spawn on a certain node then you can choose which vine by
+adding to the node groups the unique group of that vine. This is determined by
+the name of the vine ( see vines.lua ) appended with '_vines'.
+An example would be.
+
+"willow_vines" or "jungle_vines"
+
+There are two types of vines. One that spawns at the bottom of nodes and uses the
+plantlike drawtype, and vines that spawn on the side that use signlike
+drawtype. The type is determined by the spawn_on_side property in the biome
+table.
+
+### Example
+*taken from mod*
+
+```lua
+
+  vines.register_vine( name, definitions, biome )
+
+  --e.g.
+
+  vines.register_vine( 'vine', {
+    description = "Vines",
+    average_length = 9
+  }, biome )
+
+```
+
+### definitions
+|key|           type|  description|
+|---|           ---|   ---|
+|description|   string|The vine's tooltip description|
+|average_length|int|   The average length of vines|
+
+For biome definitions please see the [plants_lib API documentation](https://github.com/VanessaE/plantlife_modpack/blob/master/API.txt)
+
+## Notice
+Vines use after_destruct on registered leave nodes to remove vines from which
+the leaves are removed. This is done by using the override function.
+Malfunctions may occur if other mods override the after_destruct of these nodes
+also.
diff --git a/mods/plantlife_modpack/vines/aliases.lua b/mods/plantlife_modpack/vines/aliases.lua
new file mode 100644
index 00000000..fce72187
--- /dev/null
+++ b/mods/plantlife_modpack/vines/aliases.lua
@@ -0,0 +1,11 @@
+-- used to remove the old vine nodes. This gives room for the new nodes
+minetest.register_alias( 'vines:root', 'air' )
+minetest.register_alias( 'vines:root_rotten', 'air' )
+minetest.register_alias( 'vines:vine', 'air' )
+minetest.register_alias( 'vines:vine_rotten', 'air' )
+minetest.register_alias( 'vines:side', 'air' )
+minetest.register_alias( 'vines:side_rotten', 'air' )
+minetest.register_alias( 'vines:jungle', 'air' )
+minetest.register_alias( 'vines:jungle_rotten', 'air' )
+minetest.register_alias( 'vines:willow', 'air' )
+minetest.register_alias( 'vines:willow_rotten', 'air' )
diff --git a/mods/plantlife_modpack/vines/crafts.lua b/mods/plantlife_modpack/vines/crafts.lua
new file mode 100644
index 00000000..19e658b9
--- /dev/null
+++ b/mods/plantlife_modpack/vines/crafts.lua
@@ -0,0 +1,14 @@
+minetest.register_craft({
+  output = 'vines:rope_block',
+  recipe = vines.recipes['rope_block']
+})
+
+minetest.register_craft({
+  output = 'vines:shears',
+  recipe = vines.recipes['shears']
+})
+
+minetest.register_craftitem("vines:vines", {
+  description = "Vines",
+  inventory_image = "vines_item.png",
+})
diff --git a/mods/plantlife_modpack/vines/depends.txt b/mods/plantlife_modpack/vines/depends.txt
index d1473e18..4146336c 100644
--- a/mods/plantlife_modpack/vines/depends.txt
+++ b/mods/plantlife_modpack/vines/depends.txt
@@ -1,2 +1,3 @@
 default
 plants_lib
+moretrees?
diff --git a/mods/plantlife_modpack/vines/functions.lua b/mods/plantlife_modpack/vines/functions.lua
new file mode 100644
index 00000000..5ffb3c91
--- /dev/null
+++ b/mods/plantlife_modpack/vines/functions.lua
@@ -0,0 +1,132 @@
+vines.register_vine = function( name, defs, biome )
+  --different properties for bottom and side vines.
+  local selection_box
+  local groups = { vines=1, snappy=3, flammable=2 }
+
+  local vine_name_end = 'vines:'..name..'_end'
+  local vine_name_middle = 'vines:'..name..'_middle'
+
+  local vine_image_end = "vines_"..name.."_end.png"
+  local vine_image_middle = "vines_"..name.."_middle.png"
+
+  local drop_node = vine_name_end
+
+  biome.spawn_plants = { vine_name_end }
+
+  local vine_group = 'group:'..name..'_vines'
+  biome.spawn_surfaces[ #biome.spawn_surfaces + 1 ] = vine_group
+
+  local selection_box = { type = "wallmounted", }
+  local drawtype = 'signlike'
+  if ( not biome.spawn_on_side ) then
+    selection_box = { type = "fixed", fixed = { -0.4, -1/2, -0.4, 0.4, 1/2, 0.4 }, }
+    drawtype = 'plantlike'
+  end
+
+  minetest.register_node( vine_name_end, {
+    description = defs.description,
+    walkable = false,
+    climbable = true,
+    wield_image = vine_image_end,
+    drop = "",
+    sunlight_propagates = true,
+    paramtype = "light",
+    paramtype2 = "wallmounted",
+    buildable_to = true,
+    tile_images = { vine_image_end },
+    drawtype = drawtype,
+    inventory_image = vine_image_end,
+    groups = groups,
+    sounds = default.node_sound_leaves_defaults(),
+    selection_box = selection_box,
+    on_construct = function( pos )
+      local timer = minetest.get_node_timer( pos )
+      timer:start( math.random(5, 10) )
+    end,
+    on_timer = function( pos )
+      local node = minetest.get_node( pos )
+      local bottom = {x=pos.x, y=pos.y-1, z=pos.z}
+      local bottom_node = minetest.get_node( bottom )
+      if bottom_node.name == "air" then
+        if not ( math.random( defs.average_length ) == 1 ) then
+          minetest.set_node( pos, { name = vine_name_middle, param2 = node.param2 } )
+          minetest.set_node( bottom, { name = node.name, param2 = node.param2 } )
+          local timer = minetest.get_node_timer( bottom_node )
+          timer:start( math.random(5, 10) )
+        end
+      end
+    end,
+    after_dig_node = function(pos, node, oldmetadata, user)
+      vines.dig_vine( pos, drop_node, user )
+    end
+  })
+
+
+  minetest.register_node( vine_name_middle, {
+    description = "Matured "..defs.description,
+    walkable = false,
+    climbable = true,
+    drop = "",
+    sunlight_propagates = true,
+    paramtype = "light",
+    paramtype2 = "wallmounted",
+    buildable_to = true,
+    tile_images = { vine_image_middle },
+    wield_image = vine_image_middle,
+    drawtype = drawtype,
+    inventory_image = vine_image_middle,
+    groups = groups,
+    sounds = default.node_sound_leaves_defaults(),
+    selection_box = selection_box,
+    on_destruct = function( pos )
+      local node = minetest.get_node( pos )
+      local bottom = {x=pos.x, y=pos.y-1, z=pos.z}
+      local bottom_node = minetest.get_node( bottom )
+      if minetest.get_item_group( bottom_node.name, "vines") then
+        minetest.remove_node( bottom )
+      end
+    end,
+    after_dig_node = function( pos, node, oldmetadata, user )
+      vines.dig_vine( pos, drop_node, user )
+    end
+  })
+
+  plantslib:spawn_on_surfaces( biome )
+
+  local override_nodes = function( nodes, defs )
+    function override( index, registered )
+      local node = nodes[ index ]
+      if index > #nodes then return registered end
+      if minetest.registered_nodes[node] then
+        minetest.override_item( node, defs )
+        registered[#registered+1] = node
+      end
+      override( index+1, registered )
+    end
+    override( 1, {} )
+  end
+
+  override_nodes( biome.spawn_surfaces,{
+    after_destruct = function( pos )
+      local pos_min = { x = pos.x -1, y = pos.y - 1, z = pos.z - 1 }
+      local pos_max = { x = pos.x +1, y = pos.y + 1, z = pos.z + 1 }
+      local positions = minetest.find_nodes_in_area( pos_min, pos_max, "group:vines" )
+      for index, position in pairs(positions) do
+        minetest.remove_node( position )
+      end
+    end
+  })
+
+end
+
+vines.dig_vine = function( pos, node_name, user )
+  --only dig give the vine if shears are used
+  if not user then return false end
+  local wielded = user:get_wielded_item()
+  if 'vines:shears' == wielded:get_name() then 
+    local inv = user:get_inventory()
+    if inv then
+      inv:add_item("main", ItemStack( node_name ))
+    end
+  end
+end
diff --git a/mods/plantlife_modpack/vines/init.lua b/mods/plantlife_modpack/vines/init.lua
index 4491870c..72eda930 100644
--- a/mods/plantlife_modpack/vines/init.lua
+++ b/mods/plantlife_modpack/vines/init.lua
@@ -1,402 +1,14 @@
---[[TODO
-  ropebox rope break results in bottom rope dissapearing and bottom drop rope node to appear at the new bottom
-  and rope does not drop anything!!!!
-]]
-
-vines = {}
-
-local mod_name = "vines"
-local average_height = 12
-local spawn_interval = 90
-local vines_group = {attached_node=1,vines=1,snappy=3,flammable=2,hanging_node=1,vines_cleanup=1}
-
-vines.growth_interval = 300
-vines.growth_chance = 2
-vines.rot_interval = 300
-vines.rot_chance = 8
-
-local jungle_leaves_list = {
-	"default:jungleleaves",
-	"moretrees:jungle_leaves_red",
-	"moretrees:jungle_leaves_yellow",
-	"moretrees:jungle_leaves_green"
+vines = {
+  name = 'vines',
+  recipes = {}
 }
 
--- Nodes
-minetest.register_node("vines:rope_block", {
-  description = "Rope",
-  sunlight_propagates = true,
-  paramtype = "light",
-  tile_images = {
-    "default_wood.png^vines_rope.png",
-    "default_wood.png^vines_rope.png",
-    "default_wood.png",
-    "default_wood.png",
-    "default_wood.png^vines_rope.png",
-    "default_wood.png^vines_rope.png",
-  },
-  drawtype = "cube",
-  groups = {choppy=2,oddly_breakable_by_hand=1},
-  after_place_node = function(pos)
-    local p = {x=pos.x, y=pos.y-1, z=pos.z}
-    local n = minetest.get_node(p)
-    if n.name == "air" then
-      minetest.add_node(p, {name="vines:rope_end"})
-    end
-  end,
-  after_dig_node = function(pos, node, digger)
-    local p = {x=pos.x, y=pos.y-1, z=pos.z}
-    local n = minetest.get_node(p)
-    while n.name == 'vines:rope' do
-      minetest.remove_node(p)
-      p = {x=p.x, y=p.y-1, z=p.z}
-      n = minetest.get_node(p)
-    end
-    if n.name == 'vines:rope_end' then
-      minetest.remove_node(p)
-    end
-  end
-})
-
-minetest.register_node("vines:rope", {
-  description = "Rope",
-  walkable = false,
-  climbable = true,
-  sunlight_propagates = true,
-  paramtype = "light",
-  drop = "",
-  tile_images = { "vines_rope.png" },
-  drawtype = "plantlike",
-  groups = {flammable=2, not_in_creative_inventory=1},
-  sounds =  default.node_sound_leaves_defaults(),
-  selection_box = {
-    type = "fixed",
-    fixed = {-1/7, -1/2, -1/7, 1/7, 1/2, 1/7},
-  },
-  on_destruct = function()
-    
-  end,
-})
-
-minetest.register_node("vines:rope_end", {
-  description = "Rope",
-  walkable = false,
-  climbable = true,
-  sunlight_propagates = true,
-  paramtype = "light",
-  drop = "",
-  tile_images = { "vines_rope_end.png" },
-  drawtype = "plantlike",
-  groups = {flammable=2, not_in_creative_inventory=1},
-  sounds =  default.node_sound_leaves_defaults(),
-  after_place_node = function(pos)
-    yesh  = {x = pos.x, y= pos.y-1, z=pos.z}
-    minetest.add_node(yesh, {name="vines:rope"})
-  end,
-  selection_box = {
-	  type = "fixed",
-	  fixed = {-1/7, -1/2, -1/7, 1/7, 1/2, 1/7},
-  },
-})
-
-minetest.register_node("vines:side", {
-  description = "Vine",
-  walkable = false,
-  climbable = true,
-  drop = "",
-  sunlight_propagates = true,
-  paramtype = "light",
-  paramtype2 = "wallmounted",
-  buildable_to = true,
-  tile_images = { "vines_side.png" },
-  drawtype = "signlike",
-  inventory_image = "vines_side.png",
-  groups = vines_group,
-  sounds = default.node_sound_leaves_defaults(),
-  selection_box = {
-    type = "wallmounted",
-  },
-  after_dig_node = function(pos, oldnode, oldmetadata, user)
-    local wielded if user:get_wielded_item() ~= nil then wielded = user:get_wielded_item() else return end
-    if 'vines:shears' == wielded:get_name() then 
-      local inv = user:get_inventory()
-      if inv then
-        inv:add_item("main", ItemStack(oldnode.name))
-      end
-    end
-  end
-})
-
-minetest.register_node("vines:side_rotten", {
-  description = "Vine",
-  walkable = false,
-  climbable = false,
-  drop = "",
-  sunlight_propagates = true,
-  paramtype = "light",
-  paramtype2 = "wallmounted",
-  buildable_to = true,
-  tile_images = { "vines_side_rotten.png" },
-  drawtype = "signlike",
-  inventory_image = "vines_side.png",
-  groups = {snappy = 3,flammable=2, hanging_node=1,vines_cleanup=1},
-  sounds = default.node_sound_leaves_defaults(),
-  selection_box = {
-    type = "wallmounted",
-  },
-})
-
-minetest.register_node("vines:willow", {
-  description = "Vine",
-  walkable = false,
-  climbable = true,
-  drop = "",
-  sunlight_propagates = true,
-  paramtype = "light",
-  paramtype2 = "wallmounted",
-  buildable_to = true,
-  tile_images = { "vines_willow.png" },
-  drawtype = "signlike",
-  inventory_image = "vines_willow.png",
-  groups = vines_group,
-  sounds = default.node_sound_leaves_defaults(),
-  selection_box = {
-    type = "wallmounted",
-  },
-  after_dig_node = function(pos, oldnode, oldmetadata, user)
-    local wielded if user:get_wielded_item() ~= nil then wielded = user:get_wielded_item() else return end
-    if 'vines:shears' == wielded:get_name() then 
-      local inv = user:get_inventory()
-      if inv then
-        inv:add_item("main", ItemStack(oldnode.name))
-      end
-    end
-  end
-})
-
-minetest.register_node("vines:willow_rotten", {
-  description = "Vine",
-  walkable = false,
-  climbable = false,
-  sunlight_propagates = true,
-  paramtype = "light",
-  drop = "",
-  paramtype2 = "wallmounted",
-  buildable_to = true,
-  tile_images = { "vines_willow_rotten.png" },
-  drawtype = "signlike",
-  inventory_image = "vines_willow.png",
-  groups = {snappy = 3,flammable=2, hanging_node=1,vines_cleanup=1},
-  sounds = default.node_sound_leaves_defaults(),
-  selection_box = {
-    type = "wallmounted",
-  },
-})
-
-minetest.register_node("vines:root", {
-  description = "Vine",
-  walkable = false,
-  climbable = true,
-  sunlight_propagates = true,
-  paramtype = "light",
-  buildable_to = true,
-  tile_images = { "vines_root.png" },
-  drawtype = "plantlike",
-  inventory_image = "vines_root.png",
-  groups = {vines=1,snappy = 3,flammable=2, hanging_node=1,vines_cleanup=1},
-  sounds = default.node_sound_leaves_defaults(),
-  selection_box = {
-    type = "fixed",
-    fixed = {-1/7, -1/2, -1/7, 1/7, 1/2, 1/7},
-  },
-})
-
-minetest.register_node("vines:vine", {
-  description = "Vine",
-  walkable = false,
-  climbable = true,
-  sunlight_propagates = true,
-  drop = "",
-  paramtype = "light",
-  buildable_to = true,
-  tile_images = { "vines_vine.png" },
-  drawtype = "plantlike",
-  inventory_image = "vines_vine.png",
-  groups = vines_group,
-  sounds = default.node_sound_leaves_defaults(),
-  selection_box = {
-    type = "fixed",
-    fixed = {-0.3, -1/2, -0.3, 0.3, 1/2, 0.3},
-  },
-  after_dig_node = function(pos, oldnode, oldmetadata, user)
-    local wielded if user:get_wielded_item() ~= nil then wielded = user:get_wielded_item() else return end
-    if 'vines:shears' == wielded:get_name() then 
-      local inv = user:get_inventory()
-      if inv then
-        inv:add_item("main", ItemStack(oldnode.name))
-      end
-    end
-  end
-})
-
-minetest.register_node("vines:vine_rotten", {
-  description = "Rotten vine",
-  walkable = false,
-  climbable = true,
-  drop = "",
-  sunlight_propagates = true,
-  paramtype = "light",
-  buildable_to = true,
-  tile_images = { "vines_vine_rotten.png" },
-  drawtype = "plantlike",
-  inventory_image = "vines_vine_rotten.png",
-  groups = {snappy = 3,flammable=2, hanging_node=1,vines_cleanup=1},
-  sounds = default.node_sound_leaves_defaults(),
-  selection_box = {
-    type = "fixed",
-    fixed = {-0.3, -1/2, -0.3, 0.3, 1/2, 0.3},
-  },
-})
-
--- vine rotting
-
-minetest.register_abm({
-  nodenames = {"vines:vine", "vines:side", "vines:willow"},
-  interval = vines.rot_interval,
-  chance = vines.rot_chance,
-  action = function(pos, node, active_object_count, active_object_count_wider)
-    if minetest.find_node_near(pos, 5, "group:tree") == nil then
-      local walldir = node.param2
-      minetest.add_node(pos, {name=node.name.."_rotten", param2 = walldir})
-    end
-  end
-})
-
--- vine growth
-
-minetest.register_abm({
-  nodenames = {"vines:vine", "vines:side", "vines:willow"},
-  interval = vines.growth_interval,
-  chance = vines.growth_chance,
-  action = function(pos, node, active_object_count, active_object_count_wider)
-    local p = {x=pos.x, y=pos.y-1, z=pos.z}
-    local n = minetest.get_node(p)
-    if n.name == "air" then
-      local walldir = node.param2
-      minetest.add_node(p, {name=node.name, param2 = walldir})
-    end
-  end
-})
-
--- cleanup if the initial tree is missing entirely (e.g. has been dug away)
-
-minetest.register_abm({
-	nodenames = {"group:vines_cleanup"},
-	interval = 10,
-	chance = 5,
-	action = function(pos, node, active_object_count, active_object_count_wider)
-		if not minetest.find_node_near(pos, 1, jungle_leaves_list) then
-			local p_top = {x=pos.x, y=pos.y+1, z=pos.z}
-			if minetest.get_item_group(minetest.get_node(p_top).name, "vines_cleanup") == 0 then
-				minetest.remove_node(pos)
-			end
-		end
-	end
-})
-
--- rope extension
-
-minetest.register_abm({
-  nodenames = {"vines:rope_end"},
-  interval = 1,
-  chance = 1,
-  drop = "",
-  action = function(pos, node, active_object_count, active_object_count_wider)
-    local p = {x=pos.x, y=pos.y-1, z=pos.z}
-    local n = minetest.get_node(p)
-    --remove if top node is removed
-    if  n.name == "air" then
-      minetest.set_node(pos, {name="vines:rope"})
-      minetest.add_node(p, {name="vines:rope_end"})
-    end 
-  end
-})
---Craft
-minetest.register_craft({
-  output = 'vines:rope_block',
-  recipe = {
-    {'', 'default:wood', ''},
-    {'', 'vines:side', ''},
-    {'', 'vines:side', ''},
-  }
-})
-
-minetest.register_craftitem("vines:vines", {
-  description = "Vines",
-  inventory_image = "vines_item.png",
-})
---spawning
-plantslib:spawn_on_surfaces({
-  avoid_nodes = {"vines:vine"},
-  avoid_radius = 5,
-  spawn_delay = spawn_interval,
-  spawn_plants = {"vines:vine"},
-  spawn_chance = 10,
-  spawn_surfaces = {"default:dirt_with_grass","default:dirt"},
-  spawn_on_bottom = true,
-  plantlife_limit = -0.9,
-})
-
-plantslib:spawn_on_surfaces({
-  avoid_nodes = {"vines:vine", "vines:side"},
-  avoid_radius = 3,
-  spawn_delay = spawn_interval,
-  spawn_plants = {"vines:side"},
-  spawn_chance = 10,
-  spawn_surfaces = jungle_leaves_list,
-  spawn_on_side = true,
-  near_nodes = {"default:jungletree"},
-  near_nodes_size = 5,
-  plantlife_limit = -0.9,
-})
-
-plantslib:spawn_on_surfaces({
-  spawn_plants = {"vines:willow"},
-  spawn_delay = spawn_interval,
-  spawn_chance = 3,
-  spawn_surfaces = {"moretrees:willow_leaves"},
-  spawn_on_side = true,
-  near_nodes = {"default:water_source"},
-  near_nodes_size = 2,
-  near_nodes_vertical = 5,
-  near_nodes_count = 1,
-  plantlife_limit = -0.9,
-})
-
---Shears jojoa1997's shears
-minetest.register_tool("vines:shears", {
-	description = "Shears",
-	inventory_image = "shears.png",
-	wield_image = "shears.png",
-	stack_max = 1,
-	max_drop_level=3,
-	tool_capabilities = {
-    full_punch_interval = 1.0,
-    max_drop_level=0,
-    groupcaps={
-      snappy={times={[3]=0.2}, maxwear=0.05, maxlevel=3},
-      wool={times={[3]=0.2}, maxwear=0.05, maxlevel=3}
-    }
-  },
-})
-
-minetest.register_craft({
-	output = 'vines:shears',
-	recipe = {
-		{'', 'default:steel_ingot', ''},
-		{'default:stick', 'default:wood', 'default:steel_ingot'},
-		{'', '', 'default:stick'},
-	}
-})
+dofile( minetest.get_modpath( vines.name ) .. "/functions.lua" )
+dofile( minetest.get_modpath( vines.name ) .. "/aliases.lua" )
+dofile( minetest.get_modpath( vines.name ) .. "/recipes.lua" )
+dofile( minetest.get_modpath( vines.name ) .. "/crafts.lua" )
+dofile( minetest.get_modpath( vines.name ) .. "/nodes.lua" )
+dofile( minetest.get_modpath( vines.name ) .. "/shear.lua" )
+dofile( minetest.get_modpath( vines.name ) .. "/vines.lua" )
 
 print("[Vines] Loaded!")
diff --git a/mods/plantlife_modpack/vines/nodes.lua b/mods/plantlife_modpack/vines/nodes.lua
new file mode 100644
index 00000000..ab14b28a
--- /dev/null
+++ b/mods/plantlife_modpack/vines/nodes.lua
@@ -0,0 +1,83 @@
+minetest.register_node("vines:rope_block", {
+  description = "Rope",
+  sunlight_propagates = true,
+  paramtype = "light",
+  tile_images = {
+    "default_wood.png^vines_rope.png",
+    "default_wood.png^vines_rope.png",
+    "default_wood.png",
+    "default_wood.png",
+    "default_wood.png^vines_rope.png",
+    "default_wood.png^vines_rope.png",
+  },
+  groups = { flammable=2, choppy=2, oddly_breakable_by_hand=1 },
+  after_place_node = function(pos)
+    local p = {x=pos.x, y=pos.y-1, z=pos.z}
+    local n = minetest.get_node(p)
+    if n.name == "air" then
+      minetest.add_node(p, {name="vines:rope_end"})
+    end
+  end,
+  after_dig_node = function(pos, node, digger)
+    local p = {x=pos.x, y=pos.y-1, z=pos.z}
+    local n = minetest.get_node(p)
+    while ( n.name == 'vines:rope' or n.name == 'vines:rope_end' ) do
+      minetest.remove_node(p)
+      p = {x=p.x, y=p.y-1, z=p.z}
+      n = minetest.get_node(p)
+    end
+  end
+})
+
+minetest.register_node("vines:rope", {
+  description = "Rope",
+  walkable = false,
+  climbable = true,
+  sunlight_propagates = true,
+  paramtype = "light",
+  drop = "",
+  tile_images = { "vines_rope.png" },
+  drawtype = "plantlike",
+  groups = {flammable=2, not_in_creative_inventory=1},
+  sounds =  default.node_sound_leaves_defaults(),
+  selection_box = {
+    type = "fixed",
+    fixed = {-1/7, -1/2, -1/7, 1/7, 1/2, 1/7},
+  },
+})
+
+minetest.register_node("vines:rope_end", {
+  description = "Rope",
+  walkable = false,
+  climbable = true,
+  sunlight_propagates = true,
+  paramtype = "light",
+  drop = "",
+  tile_images = { "vines_rope_end.png" },
+  drawtype = "plantlike",
+  groups = {flammable=2, not_in_creative_inventory=1},
+  sounds =  default.node_sound_leaves_defaults(),
+  after_place_node = function(pos)
+    yesh  = {x = pos.x, y= pos.y-1, z=pos.z}
+    minetest.add_node(yesh, {name="vines:rope"})
+  end,
+  selection_box = {
+	  type = "fixed",
+	  fixed = {-1/7, -1/2, -1/7, 1/7, 1/2, 1/7},
+  },
+  on_construct = function( pos )
+    local timer = minetest.get_node_timer( pos )
+    timer:start( 1 )
+  end,
+  on_timer = function( pos, elapsed )
+    local p = {x=pos.x, y=pos.y-1, z=pos.z}
+    local n = minetest.get_node(p)
+    if  n.name == "air" then
+      minetest.set_node(pos, {name="vines:rope"})
+      minetest.add_node(p, {name="vines:rope_end"})
+    else
+      local timer = minetest.get_node_timer( pos )
+      timer:start( 1 )
+    end
+  end
+})
diff --git a/mods/plantlife_modpack/vines/readme.txt b/mods/plantlife_modpack/vines/readme.txt
deleted file mode 100644
index 0228a77f..00000000
--- a/mods/plantlife_modpack/vines/readme.txt
+++ /dev/null
@@ -1,43 +0,0 @@
- __   __  ___   __    _  _______  _______ 
-|  | |  ||   | |  |  | ||       ||       |
-|  |_|  ||   | |   |_| ||    ___||  _____|
-|       ||   | |       ||   |___ | |_____ 
-|       ||   | |  _    ||    ___||_____  |
- |     | |   | | | |   ||   |___  _____| |
-  |___|  |___| |_|  |__||_______||_______|
-
-BY:             bas080
-DESCRIPTION:    Vines and ropebox
-VERSION:        2.2.1
-LICENCE:        WTFPL
-FORUM:          http://forum.minetest.net/viewtopic.php?id=2344
-
-Changelog
----------
-2.2.1
-* Also spawn on leaves that are near jungletree
-* Uses default wood texture
-* Drops actual vines
-* Changed craft
-
-2.2
-* Spawns on all leaves that are near water
-
-2.1
-* Removed rope(end) from creative inventory
-
-2.0
-* Root vines texture and node (no spawn)
-* Side vines spawn on leaves
-* Willow vines spawns on moretrees willow leaves
-* Ropebox after_dig_node re-defined
-
-1.5
-* Added side vines
-* Uses plant_lib api
-* Original vines do not spawn anymore but are still there.
-
-1.0
-* Vines spawn beneath leave nodes
-* Has rotten and non rotten vines
-* Ropebox with craft
diff --git a/mods/plantlife_modpack/vines/recipes.lua b/mods/plantlife_modpack/vines/recipes.lua
new file mode 100644
index 00000000..d2b928a9
--- /dev/null
+++ b/mods/plantlife_modpack/vines/recipes.lua
@@ -0,0 +1,12 @@
+vines.recipes['rope_block'] = {
+  {'', 'default:wood', ''},
+  {'', 'group:vines', ''},
+  {'', 'group:vines', ''}
+}
+
+vines.recipes['shears'] = {
+  {'', 'default:steel_ingot', ''},
+  {'default:stick', 'default:wood', 'default:steel_ingot'},
+  {'', '', 'default:stick'}
+}
+
diff --git a/mods/plantlife_modpack/vines/shear.lua b/mods/plantlife_modpack/vines/shear.lua
new file mode 100644
index 00000000..996cfdcd
--- /dev/null
+++ b/mods/plantlife_modpack/vines/shear.lua
@@ -0,0 +1,15 @@
+minetest.register_tool("vines:shears", {
+  description = "Shears",
+  inventory_image = "vines_shears.png",
+  wield_image = "shears.png",
+  stack_max = 1,
+  max_drop_level=3,
+  tool_capabilities = {
+    full_punch_interval = 1.0,
+    max_drop_level=0,
+    groupcaps={
+      snappy={times={[3]=0.2}, maxwear=0.05, maxlevel=3},
+      wool={times={[3]=0.2}, maxwear=0.05, maxlevel=3}
+    }
+  },
+})
diff --git a/mods/plantlife_modpack/vines/textures/new/sidevine.png b/mods/plantlife_modpack/vines/textures/new/sidevine.png
deleted file mode 100644
index fdeaeaeb..00000000
Binary files a/mods/plantlife_modpack/vines/textures/new/sidevine.png and /dev/null differ
diff --git a/mods/plantlife_modpack/vines/textures/new/vinesdead.png b/mods/plantlife_modpack/vines/textures/new/vinesdead.png
deleted file mode 100644
index 3ac6ea51..00000000
Binary files a/mods/plantlife_modpack/vines/textures/new/vinesdead.png and /dev/null differ
diff --git a/mods/plantlife_modpack/vines/textures/old/vines_vine2.png b/mods/plantlife_modpack/vines/textures/old/vines_vine2.png
deleted file mode 100644
index c755da90..00000000
Binary files a/mods/plantlife_modpack/vines/textures/old/vines_vine2.png and /dev/null differ
diff --git a/mods/plantlife_modpack/vines/textures/old/vines_vine_rotten2.png b/mods/plantlife_modpack/vines/textures/old/vines_vine_rotten2.png
deleted file mode 100644
index c66e12e2..00000000
Binary files a/mods/plantlife_modpack/vines/textures/old/vines_vine_rotten2.png and /dev/null differ
diff --git a/mods/plantlife_modpack/vines/textures/vines_jungle_end.png b/mods/plantlife_modpack/vines/textures/vines_jungle_end.png
new file mode 100644
index 00000000..6c8d3395
Binary files /dev/null and b/mods/plantlife_modpack/vines/textures/vines_jungle_end.png differ
diff --git a/mods/plantlife_modpack/vines/textures/vines_jungle_middle.png b/mods/plantlife_modpack/vines/textures/vines_jungle_middle.png
new file mode 100644
index 00000000..bf838a50
Binary files /dev/null and b/mods/plantlife_modpack/vines/textures/vines_jungle_middle.png differ
diff --git a/mods/plantlife_modpack/vines/textures/vines_root.png b/mods/plantlife_modpack/vines/textures/vines_root.png
deleted file mode 100644
index 49f88c05..00000000
Binary files a/mods/plantlife_modpack/vines/textures/vines_root.png and /dev/null differ
diff --git a/mods/plantlife_modpack/vines/textures/vines_root_end.png b/mods/plantlife_modpack/vines/textures/vines_root_end.png
new file mode 100644
index 00000000..4fc3f87a
Binary files /dev/null and b/mods/plantlife_modpack/vines/textures/vines_root_end.png differ
diff --git a/mods/plantlife_modpack/vines/textures/new/bottomvine.png b/mods/plantlife_modpack/vines/textures/vines_root_middle.png
similarity index 100%
rename from mods/plantlife_modpack/vines/textures/new/bottomvine.png
rename to mods/plantlife_modpack/vines/textures/vines_root_middle.png
diff --git a/mods/plantlife_modpack/vines/textures/shears.png b/mods/plantlife_modpack/vines/textures/vines_shears.png
similarity index 100%
rename from mods/plantlife_modpack/vines/textures/shears.png
rename to mods/plantlife_modpack/vines/textures/vines_shears.png
diff --git a/mods/plantlife_modpack/vines/textures/vines_side.png b/mods/plantlife_modpack/vines/textures/vines_side.png
deleted file mode 100644
index fdeaeaeb..00000000
Binary files a/mods/plantlife_modpack/vines/textures/vines_side.png and /dev/null differ
diff --git a/mods/plantlife_modpack/vines/textures/vines_side_end.png b/mods/plantlife_modpack/vines/textures/vines_side_end.png
new file mode 100644
index 00000000..5b3b28f7
Binary files /dev/null and b/mods/plantlife_modpack/vines/textures/vines_side_end.png differ
diff --git a/mods/plantlife_modpack/vines/textures/vines_side_rotten.png b/mods/plantlife_modpack/vines/textures/vines_side_middle.png
similarity index 100%
rename from mods/plantlife_modpack/vines/textures/vines_side_rotten.png
rename to mods/plantlife_modpack/vines/textures/vines_side_middle.png
diff --git a/mods/plantlife_modpack/vines/textures/vines_vine.png b/mods/plantlife_modpack/vines/textures/vines_vine.png
deleted file mode 100644
index 8afffe89..00000000
Binary files a/mods/plantlife_modpack/vines/textures/vines_vine.png and /dev/null differ
diff --git a/mods/plantlife_modpack/vines/textures/vines_vine_end.png b/mods/plantlife_modpack/vines/textures/vines_vine_end.png
new file mode 100644
index 00000000..062857be
Binary files /dev/null and b/mods/plantlife_modpack/vines/textures/vines_vine_end.png differ
diff --git a/mods/plantlife_modpack/vines/textures/new/vineslive.png b/mods/plantlife_modpack/vines/textures/vines_vine_middle.png
similarity index 100%
rename from mods/plantlife_modpack/vines/textures/new/vineslive.png
rename to mods/plantlife_modpack/vines/textures/vines_vine_middle.png
diff --git a/mods/plantlife_modpack/vines/textures/vines_vine_rotten.png b/mods/plantlife_modpack/vines/textures/vines_vine_rotten.png
deleted file mode 100644
index 3ac6ea51..00000000
Binary files a/mods/plantlife_modpack/vines/textures/vines_vine_rotten.png and /dev/null differ
diff --git a/mods/plantlife_modpack/vines/textures/vines_willow_end.png b/mods/plantlife_modpack/vines/textures/vines_willow_end.png
new file mode 100644
index 00000000..b5b8e594
Binary files /dev/null and b/mods/plantlife_modpack/vines/textures/vines_willow_end.png differ
diff --git a/mods/plantlife_modpack/vines/textures/vines_willow.png b/mods/plantlife_modpack/vines/textures/vines_willow_middle.png
similarity index 100%
rename from mods/plantlife_modpack/vines/textures/vines_willow.png
rename to mods/plantlife_modpack/vines/textures/vines_willow_middle.png
diff --git a/mods/plantlife_modpack/vines/textures/vines_willow_rotten.png b/mods/plantlife_modpack/vines/textures/vines_willow_rotten.png
deleted file mode 100644
index 3c0622f7..00000000
Binary files a/mods/plantlife_modpack/vines/textures/vines_willow_rotten.png and /dev/null differ
diff --git a/mods/plantlife_modpack/vines/vines.lua b/mods/plantlife_modpack/vines/vines.lua
new file mode 100644
index 00000000..cb16b6dd
--- /dev/null
+++ b/mods/plantlife_modpack/vines/vines.lua
@@ -0,0 +1,97 @@
+vines.register_vine( 'root', {
+  description = "Roots",
+  average_length = 9,
+},{
+  choose_random_wall = true,
+  avoid_nodes = {"vines:root_middle"},
+  avoid_radius = 5,
+  spawn_delay = 500,
+  spawn_chance = 10,
+  spawn_surfaces = {
+    "default:dirt_with_grass",
+    "default:dirt"
+  },
+  spawn_on_bottom = true,
+  plantlife_limit = -0.6,
+  humidity_min = 0.4,
+})
+
+vines.register_vine( 'vine', {
+  description = "Vines",
+  average_length = 5,
+},{
+  choose_random_wall = true,
+  avoid_nodes = {"group:vines"},
+  avoid_radius = 5,
+  spawn_delay = 500,
+  spawn_chance = 100,
+  spawn_surfaces = {
+    "default:leaves",
+    "default:jungleleave",
+    "moretrees:jungetree_leaves_red",
+    "moretrees:jungetree_leaves_yellow",
+    "moretrees:jungetree_leaves_green"
+  },
+  spawn_on_bottom = true,
+  plantlife_limit = -0.9,
+  humidity_min = 0.7,
+})
+
+vines.register_vine( 'side', {
+  description = "Vines",
+  average_length = 3,
+},{
+  choose_random_wall = true,
+  avoid_nodes = {"group:vines"},
+  choose_random_wall = true,
+  avoid_radius = 3,
+  spawn_delay = 500,
+  spawn_chance = 100,
+  spawn_surfaces = {
+    "default:leaves",
+    "default:jungleleaves",
+    "moretrees:jungletree_leaves_red",
+    "moretrees:jungletree_leaves_yellow",
+    "moretrees:jungletree_leaves_green"
+  },
+  spawn_on_side = true,
+  plantlife_limit = -0.9,
+  humidity_min = 0.4,
+})
+
+vines.register_vine( 'jungle', {
+  description = "Jungle Vines",
+  average_length = 7,
+},{
+  choose_random_wall = true,
+  avoid_nodes = {"group:vines"},
+  avoid_radius = 5,
+  spawn_delay = 500,
+  spawn_chance = 100,
+  spawn_surfaces = {
+    "default:jungletree",
+    "moretrees:jungletree_trunk"
+  },
+  spawn_on_side = true,
+  plantlife_limit = -0.4,
+  humidity_min = 0.2,
+})
+
+vines.register_vine( 'willow', {
+  description = "Willow Vines",
+  average_length = 9,
+},{
+  choose_random_wall = true,
+  avoid_nodes = { "vines:willow_middle" },
+  avoid_radius = 5,
+  near_nodes = { 'default:water_source' },
+  near_nodes_size = 1,
+  near_nodes_vertical = 7,
+  near_nodes_count = 1,
+  plantlife_limit = -0.8,
+  spawn_chance = 10,
+  spawn_delay = 500,
+  spawn_on_side = true,
+  spawn_surfaces = {"moretrees:willow_leaves"},
+  humidity_min = 0.5
+})