Super duper VoxelManipulator speedups to nearly every API function, and plus support for unloaded areas. Still in progress. Also, fix //allocate for very large schematics.

WorldEdit API.md

@@ -208,6 +208,6 @@ Returns an error if the code fails or nil otherwise.
 
 ### error = worldedit.luatransform(pos1, pos2, code)
 
-Executes `code` as a Lua chunk in the global namespace with the variable pos available, for each node in a region defined by positions `pos1` and `pos2`.
+Executes `code` as a Lua chunk in the global namespace with the variable `pos` available, for each node in a region defined by positions `pos1` and `pos2`.
 
 Returns an error if the code fails or nil otherwise.

worldedit/code.lua

@@ -24,6 +24,10 @@ worldedit.luatransform = function(pos1, pos2, code)
 	end
 	local operation = factory()
 
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	manip:read_from_map(pos1, pos2)
+
 	local pos = {x=pos1.x, y=0, z=0}
 	while pos.x <= pos2.x do
 		pos.y = pos1.y

worldedit/init.lua

@@ -2,7 +2,7 @@ local path = minetest.get_modpath(minetest.get_current_modname())
 
 local loadmodule = function(path)
 	return pcall(function()
-		dofile(path)
+		return dofile(path)
 	end)
 end
 

worldedit/manipulations.lua

@@ -3,6 +3,7 @@ local minetest = minetest --local copy of global
 
 --wip: test the entire API again to make sure it works
 --wip: remove env parameter where no longer needed in chat commands module
+--wip: fix the queue
 
 --modifies positions `pos1` and `pos2` so that each component of `pos1` is less than or equal to its corresponding conent of `pos2`, returning two new positions
 worldedit.sort_pos = function(pos1, pos2)
@@ -32,12 +33,19 @@ worldedit.set = function(pos1, pos2, nodename)
 
 	--set up voxel manipulator
 	local manip = minetest.get_voxel_manip()
-	manip:read_from_map(pos1, pos2)
+	local emerged_pos1, emerged_pos2 = manip:read_from_map(pos1, pos2)
+	local area = VoxelArea:new({MinEdge=emerged_pos1, MaxEdge=emerged_pos2})
 
-	--fill nodes table with node to be set
+	--fill emerged area with ignore
 	local nodes = {}
+	local ignore = minetest.get_content_id("ignore")
+	for i = 1, worldedit.volume(emerged_pos1, emerged_pos2) do
+		nodes[i] = ignore
+	end
+
+	--fill selected area with node
 	local node_id = minetest.get_content_id(nodename)
-	for i = 1, (pos2.x - pos1.x) * (pos2.y - pos1.y) * (pos2.z - pos1.z) do
+	for i in area:iterp(pos1, pos2) do
 		nodes[i] = node_id
 	end
 
@@ -53,39 +61,55 @@ end
 worldedit.replace = function(pos1, pos2, searchnode, replacenode)
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 
-	local node = {name=replacenode}
+	--set up voxel manipulator
-	local add_node = minetest.add_node
+	local manip = minetest.get_voxel_manip()
-	local nodes = minetest.find_nodes_in_area(pos1, pos2, searchnode)
+	local emerged_pos1, emerged_pos2 = manip:read_from_map(pos1, pos2)
-	for _, pos in ipairs(nodes) do
+	local area = VoxelArea:new({MinEdge=emerged_pos1, MaxEdge=emerged_pos2})
-		add_node(pos, node)
+
+	local nodes = manip:get_data()
+	local searchnode_id = minetest.get_content_id(searchnode)
+	local replacenode_id = minetest.get_content_id(replacenode)
+	local count = 0
+	for i in area:iterp(pos1, pos2) do --replace searchnode with replacenode
+		if nodes[i] == searchnode_id then
+			nodes[i] = replacenode_id
+			count = count + 1
+		end
 	end
-	return #nodes
+
+	--update map nodes
+	manip:set_data(nodes)
+	manip:write_to_map()
+	manip:update_map()
+
+	return count
 end
 
 --replaces all nodes other than `searchnode` with `replacenode` in a region defined by positions `pos1` and `pos2`, returning the number of nodes replaced
-worldedit.replaceinverse = function(pos1, pos2, searchnode, replacenode) --wip: use voxelmanip get_data for this
+worldedit.replaceinverse = function(pos1, pos2, searchnode, replacenode)
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 
-	local pos = {x=pos1.x, y=0, z=0}
+	--set up voxel manipulator
-	local node = {name=replacenode}
+	local manip = minetest.get_voxel_manip()
-	local get_node, add_node = minetest.get_node, minetest.add_node
+	local emerged_pos1, emerged_pos2 = manip:read_from_map(pos1, pos2)
+	local area = VoxelArea:new({MinEdge=emerged_pos1, MaxEdge=emerged_pos2})
+
+	local nodes = manip:get_data()
+	local searchnode_id = minetest.get_content_id(searchnode)
+	local replacenode_id = minetest.get_content_id(replacenode)
 	local count = 0
-	while pos.x <= pos2.x do
+	for i in area:iterp(pos1, pos2) do --replace anything that is not searchnode with replacenode
-		pos.y = pos1.y
+		if nodes[i] ~= searchnode_id then
-		while pos.y <= pos2.y do
+			nodes[i] = replacenode_id
-			pos.z = pos1.z
+			count = count + 1
-			while pos.z <= pos2.z do
-				local name = get_node(pos).name
-				if name ~= "ignore" and name ~= searchnode then
-					add_node(pos, node)
-					count = count + 1
-				end
-				pos.z = pos.z + 1
-			end
-			pos.y = pos.y + 1
 		end
-		pos.x = pos.x + 1
 	end
+
+	--update map nodes
+	manip:set_data(nodes)
+	manip:write_to_map()
+	manip:update_map()
+
 	return count
 end
 
@@ -94,7 +118,7 @@ worldedit.copy = function(pos1, pos2, axis, amount, env)
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 	if env == nil then env = minetest.env end
 
-	--wip: copy slice by slice using schematic method in the copy axis and transfer metadata in separate loop (and if the amount is greater than the length in the axis, copy whole thing at a time)
+	--wip: copy slice by slice using schematic method in the copy axis and transfer metadata in separate loop (and if the amount is greater than the length in the axis, copy whole thing at a time), use voxelmanip to keep area loaded
 	if amount < 0 then
 		local pos = {x=pos1.x, y=0, z=0}
 		while pos.x <= pos2.x do
@@ -144,7 +168,7 @@ worldedit.move = function(pos1, pos2, axis, amount, env)
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 	if env == nil then env = minetest.env end
 
-	--wip: move slice by slice using schematic method in the move axis and transfer metadata in separate loop (and if the amount is greater than the length in the axis, copy whole thing at a time and erase original after, using schematic method)
+	--wip: move slice by slice using schematic method in the move axis and transfer metadata in separate loop (and if the amount is greater than the length in the axis, copy whole thing at a time and erase original after, using schematic method), use voxelmanip to keep area loaded
 	if amount < 0 then
 		local pos = {x=pos1.x, y=0, z=0}
 		while pos.x <= pos2.x do
@@ -205,7 +229,7 @@ worldedit.stack = function(pos1, pos2, axis, count, env)
 		amount = amount + length
 		copy(pos1, pos2, axis, amount, env)
 	end
-	return worldedit.volume(pos1, pos2)
+	return worldedit.volume(pos1, pos2) * count
 end
 
 --scales the region defined by positions `pos1` and `pos2` by an factor of positive integer `factor` with `pos1` as the origin, returning the number of nodes scaled, the new scaled position 1, and the new scaled position 2
@@ -216,14 +240,20 @@ worldedit.scale = function(pos1, pos2, factor)
 	local get_node, get_meta, place_schematic = minetest.get_node, minetest.get_meta, minetest.place_schematic
 	local placeholder_node = {name="", param1=0, param2=0}
 	local nodes = {}
-	for i = 1, size ^ 3 do
+	for i = 1, factor ^ 3 do
 		nodes[i] = placeholder_node
 	end
-	local schematic = {size={x=size, y=size, z=size}, data=nodes}
+	local schematic = {size={x=factor, y=factor, z=factor}, data=nodes}
+
+	local size = factor - 1
+
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	local new_pos2 = {x=pos1.x + (pos2.x - pos1.x) * factor + size, y=pos1.y + (pos2.y - pos1.y) * factor + size, z=pos1.z + (pos2.z - pos1.z) * factor + size}
+	local emerged_pos1, emerged_pos2 = manip:read_from_map(pos1, new_pos2)
 
 	local pos = {x=pos2.x, y=0, z=0}
 	local bigpos = {x=0, y=0, z=0}
-	size = factor - 1
 	while pos.x >= pos1.x do
 		pos.y = pos2.y
 		while pos.y >= pos1.y do
@@ -236,14 +266,19 @@ worldedit.scale = function(pos1, pos2, factor)
 				local posx, posy, posz = pos1.x + (pos.x - pos1.x) * factor, pos1.y + (pos.y - pos1.y) * factor, pos1.z + (pos.z - pos1.z) * factor
 
 				--create large node
-				placeholder_node[1], placeholder_node[3] = node.name, node.param2
+				placeholder_node.name = node.name
+				placeholder_node.param1, placeholder_node.param2 = node.param1, node.param2
 				bigpos.x, bigpos.y, bigpos.z = posx, posy, posz
 				place_schematic(bigpos, schematic)
-				for x = 0, size do --fill in large node meta
+
-					for y = 0, size do
+				--fill in large node meta
-						for z = 0, size do
+				if next(meta.fields) ~= nil and next(meta.inventory) ~= nil then --node has meta fields
-							bigpos.x, bigpos.y, bigpos.z = posx + x, posy + y, posz + z
+					for x = 0, size do
-							get_meta(bigpos):from_table(meta) --set metadata of new node
+						for y = 0, size do
+							for z = 0, size do
+								bigpos.x, bigpos.y, bigpos.z = posx + x, posy + y, posz + z
+								get_meta(bigpos):from_table(meta) --set metadata of new node
+							end
 						end
 					end
 				end
@@ -253,8 +288,7 @@ worldedit.scale = function(pos1, pos2, factor)
 		end
 		pos.x = pos.x - 1
 	end
-	local newpos2 = {x=pos1.x + (pos2.x - pos1.x) * factor + size, y=pos1.y + (pos2.y - pos1.y) * factor + size, z=pos1.z + (pos2.z - pos1.z) * factor + size}
+	return worldedit.volume(pos1, pos2) * (factor ^ 3), pos1, new_pos2
-	return worldedit.volume(pos1, pos2), pos1, newpos2
 end
 
 --transposes a region defined by the positions `pos1` and `pos2` between the `axis1` and `axis2` axes, returning the number of nodes transposed, the new transposed position 1, and the new transposed position 2
@@ -275,9 +309,16 @@ worldedit.transpose = function(pos1, pos2, axis1, axis2, env)
 	end
 
 	--calculate the new position 2 after transposition
-	local newpos2 = {x=pos2.x, y=pos2.y, z=pos2.z}
+	local new_pos2 = {x=pos2.x, y=pos2.y, z=pos2.z}
-	newpos2[axis1] = pos1[axis1] + extent2
+	new_pos2[axis1] = pos1[axis1] + extent2
-	newpos2[axis2] = pos1[axis2] + extent1
+	new_pos2[axis2] = pos1[axis2] + extent1
+
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	local upperbound = {x=pos2.x, y=pos2.y, z=pos2.z}
+	if upperbound[axis1] < new_pos2[axis1] then upperbound[axis1] = new_pos2[axis1] end
+	if upperbound[axis2] < new_pos2[axis2] then upperbound[axis2] = new_pos2[axis2] end
+	manip:read_from_map(pos1, upperbound)
 
 	local pos = {x=pos1.x, y=0, z=0}
 	local get_node, get_meta, add_node = minetest.get_node, minetest.get_meta, minetest.add_node
@@ -306,34 +347,38 @@ worldedit.transpose = function(pos1, pos2, axis1, axis2, env)
 		end
 		pos.x = pos.x + 1
 	end
-	return worldedit.volume(pos1, pos2), pos1, newpos2
+	return worldedit.volume(pos1, pos2), pos1, new_pos2
 end
 
 --flips a region defined by the positions `pos1` and `pos2` along the `axis` axis ("x" or "y" or "z"), returning the number of nodes flipped
 worldedit.flip = function(pos1, pos2, axis, env)
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	manip:read_from_map(pos1, pos2)
+
 	--wip: flip the region slice by slice along the flip axis using schematic method
 	local pos = {x=pos1.x, y=0, z=0}
 	local start = pos1[axis] + pos2[axis]
 	pos2[axis] = pos1[axis] + math.floor((pos2[axis] - pos1[axis]) / 2)
-	if env == nil then env = minetest.env end
+	local get_node, get_meta, add_node = minetest.get_node, minetest.get_meta, minetest.add_node
 	while pos.x <= pos2.x do
 		pos.y = pos1.y
 		while pos.y <= pos2.y do
 			pos.z = pos1.z
 			while pos.z <= pos2.z do
-				local node1 = env:get_node(pos)
+				local node1 = get_node(pos)
-				local meta1 = env:get_meta(pos):to_table()
+				local meta1 = get_meta(pos):to_table()
 				local value = pos[axis]
 				pos[axis] = start - value
-				local node2 = env:get_node(pos)
+				local node2 = get_node(pos)
-				local meta2 = env:get_meta(pos):to_table()
+				local meta2 = get_meta(pos):to_table()
-				env:add_node(pos, node1)
+				add_node(pos, node1)
-				env:get_meta(pos):from_table(meta1)
+				get_meta(pos):from_table(meta1)
 				pos[axis] = value
-				env:add_node(pos, node2)
+				add_node(pos, node2)
-				env:get_meta(pos):from_table(meta2)
+				get_meta(pos):from_table(meta2)
 				pos.z = pos.z + 1
 			end
 			pos.y = pos.y + 1
@@ -372,7 +417,7 @@ worldedit.rotate = function(pos1, pos2, axis, angle, env)
 end
 
 --rotates all oriented nodes in a region defined by the positions `pos1` and `pos2` by `angle` degrees clockwise (90 degree increment) around the Y axis, returning the number of nodes oriented
-worldedit.orient = function(pos1, pos2, angle, env)
+worldedit.orient = function(pos1, pos2, angle, env) --wip: support 6D facedir rotation along arbitrary axis
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 	local registered_nodes = minetest.registered_nodes
 
@@ -394,6 +439,10 @@ worldedit.orient = function(pos1, pos2, angle, env)
 	local wallmounted_substitution = wallmounted[angle]
 	local facedir_substitution = facedir[angle]
 
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	manip:read_from_map(pos1, pos2)
+
 	local count = 0
 	local get_node, get_meta, add_node = minetest.get_node, minetest.get_meta, minetest.add_node
 	local pos = {x=pos1.x, y=0, z=0}
@@ -431,6 +480,11 @@ end
 --fixes the lighting in a region defined by positions `pos1` and `pos2`, returning the number of nodes updated
 worldedit.fixlight = function(pos1, pos2, env)
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
+
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	manip:read_from_map(pos1, pos2)
+
 	local nodes = minetest.find_nodes_in_area(pos1, pos2, "air")
 	local dig_node = minetest.dig_node
 	for _, pos in ipairs(nodes) do

worldedit/primitives.lua

@@ -5,27 +5,39 @@ local minetest = minetest --local copy of global
 worldedit.hollow_sphere = function(pos, radius, nodename)
 	--set up voxel manipulator
 	local manip = minetest.get_voxel_manip()
-	manip:read_from_map(
+	local pos1 = {x=pos.x - radius, y=pos.y - radius, z=pos.z - radius}
-		{x=pos.x - radius, y=pos.y - radius, z=pos.z - radius},
+	local pos2 = {x=pos.x + radius, y=pos.y + radius, z=pos.z + radius}
-		{x=pos.x + radius, y=pos.y + radius, z=pos.z + radius},
+	local emerged_pos1, emerged_pos2 = manip:read_from_map(pos1, pos2)
-	)
+	local area = VoxelArea:new({MinEdge=emerged_pos1, MaxEdge=emerged_pos2})
 
-	local insert = table.insert
+	--fill emerged area with ignore
-	local node_id = minetest.get_content_id(nodename)
-	local ignore_id = minetest.get_content_id("ignore")
-	local min_radius, max_radius = radius * (radius - 1), radius * (radius + 1)
 	local nodes = {}
+	local ignore = minetest.get_content_id("ignore")
+	for i = 1, worldedit.volume(emerged_pos1, emerged_pos2) do
+		nodes[i] = ignore
+	end
+
+	--fill selected area with node
+	local node_id = minetest.get_content_id(nodename)
+	local min_radius, max_radius = radius * (radius - 1), radius * (radius + 1)
+	local ystride, zstride = area.ystride, area.zstride
+	local x, y, z = -radius, -radius, -radius
 	local count = 0
-	for x = -radius, radius do
+	for i in area:iterp(pos1, pos2) do
-		for y = -radius, radius do
+		local squared = x * x + y * y + z * z
-			for z = -radius, radius do
+		if squared >= min_radius and squared <= max_radius then --position is on surface of sphere
-				local squared = x * x + y * y + z * z
+			nodes[i] = node_id
-				if squared >= min_radius and squared <= max_radius then --surface of sphere
+			count = count + 1
-					insert(nodes, node_id)
+		end
-					count = count + 1
+
-				else
+		--move to the next position
-					insert(nodes, ignore_id)
+		x = x + 1
-				end
+		if x > radius then
+			x = -radius
+			y = y + 1
+			if y > radius then
+				y = -radius
+				z = z + 1
 			end
 		end
 	end
@@ -42,26 +54,38 @@ end
 worldedit.sphere = function(pos, radius, nodename)
 	--set up voxel manipulator
 	local manip = minetest.get_voxel_manip()
-	manip:read_from_map(
+	local pos1 = {x=pos.x - radius, y=pos.y - radius, z=pos.z - radius}
-		{x=pos.x - radius, y=pos.y - radius, z=pos.z - radius},
+	local pos2 = {x=pos.x + radius, y=pos.y + radius, z=pos.z + radius}
-		{x=pos.x + radius, y=pos.y + radius, z=pos.z + radius},
+	local emerged_pos1, emerged_pos2 = manip:read_from_map(pos1, pos2)
-	)
+	local area = VoxelArea:new({MinEdge=emerged_pos1, MaxEdge=emerged_pos2})
 
-	local insert = table.insert
+	--fill emerged area with ignore
-	local node_id = minetest.get_content_id(nodename)
-	local ignore_id = minetest.get_content_id("ignore")
-	local max_radius = radius * (radius + 1)
 	local nodes = {}
+	local ignore = minetest.get_content_id("ignore")
+	for i = 1, worldedit.volume(emerged_pos1, emerged_pos2) do
+		nodes[i] = ignore
+	end
+
+	--fill selected area with node
+	local node_id = minetest.get_content_id(nodename)
+	local max_radius = radius * (radius + 1)
+	local ystride, zstride = area.ystride, area.zstride
+	local x, y, z = -radius, -radius, -radius
 	local count = 0
-	for x = -radius, radius do
+	for i in area:iterp(pos1, pos2) do
-		for y = -radius, radius do
+		if x * x + y * y + z * z <= max_radius then --position is inside sphere
-			for z = -radius, radius do
+			nodes[i] = node_id
-				if x * x + y * y + z * z <= max_radius then --inside sphere
+			count = count + 1
-					insert(nodes, node_id)
+		end
-					count = count + 1
+
-				else
+		--move to the next position
-					insert(nodes, ignore_id)
+		x = x + 1
-				end
+		if x > radius then
+			x = -radius
+			y = y + 1
+			if y > radius then
+				y = -radius
+				z = z + 1
 			end
 		end
 	end
@@ -75,30 +99,42 @@ worldedit.sphere = function(pos, radius, nodename)
 end
 
 --adds a hollow dome centered at `pos` with radius `radius`, composed of `nodename`, returning the number of nodes added
-worldedit.hollow_dome = function(pos, radius, nodename) --wip: use bresenham sphere for maximum speed
+worldedit.hollow_dome = function(pos, radius, nodename)
 	--set up voxel manipulator
 	local manip = minetest.get_voxel_manip()
-	manip:read_from_map(
+	local pos1 = {x=pos.x - radius, y=pos.y, z=pos.z - radius}
-		{x=pos.x - radius, y=pos.y, z=pos.z - radius},
+	local pos2 = {x=pos.x + radius, y=pos.y + radius, z=pos.z + radius}
-		{x=pos.x + radius, y=pos.y + radius, z=pos.z + radius},
+	local emerged_pos1, emerged_pos2 = manip:read_from_map(pos1, pos2)
-	)
+	local area = VoxelArea:new({MinEdge=emerged_pos1, MaxEdge=emerged_pos2})
 
-	local insert = table.insert
+	--fill emerged area with ignore
-	local node_id = minetest.get_content_id(nodename)
-	local ignore_id = minetest.get_content_id("ignore")
-	local min_radius, max_radius = radius * (radius - 1), radius * (radius + 1)
 	local nodes = {}
+	local ignore = minetest.get_content_id("ignore")
+	for i = 1, worldedit.volume(emerged_pos1, emerged_pos2) do
+		nodes[i] = ignore
+	end
+
+	--fill selected area with node
+	local node_id = minetest.get_content_id(nodename)
+	local min_radius, max_radius = radius * (radius - 1), radius * (radius + 1)
+	local ystride, zstride = area.ystride, area.zstride
+	local x, y, z = -radius, 0, -radius
 	local count = 0
-	for x = -radius, radius do
+	for i in area:iterp(pos1, pos2) do
-		for y = 0, radius do
+		local squared = x * x + y * y + z * z
-			for z = -radius, radius do
+		if squared >= min_radius and squared <= max_radius then --position is on surface of sphere
-				local squared = x * x + y * y + z * z
+			nodes[i] = node_id
-				if squared >= min_radius and squared <= max_radius then --surface of dome
+			count = count + 1
-					insert(nodes, node_id)
+		end
-					count = count + 1
+
-				else
+		--move to the next position
-					insert(nodes, ignore_id)
+		x = x + 1
-				end
+		if x > radius then
+			x = -radius
+			y = y + 1
+			if y > radius then
+				y = 0
+				z = z + 1
 			end
 		end
 	end
@@ -115,26 +151,38 @@ end
 worldedit.dome = function(pos, radius, nodename) --wip: use bresenham sphere for maximum speed
 	--set up voxel manipulator
 	local manip = minetest.get_voxel_manip()
-	manip:read_from_map(
+	local pos1 = {x=pos.x - radius, y=pos.y, z=pos.z - radius}
-		{x=pos.x - radius, y=pos.y, z=pos.z - radius},
+	local pos2 = {x=pos.x + radius, y=pos.y + radius, z=pos.z + radius}
-		{x=pos.x + radius, y=pos.y + radius, z=pos.z + radius},
+	local emerged_pos1, emerged_pos2 = manip:read_from_map(pos1, pos2)
-	)
+	local area = VoxelArea:new({MinEdge=emerged_pos1, MaxEdge=emerged_pos2})
 
-	local insert = table.insert
+	--fill emerged area with ignore
-	local node_id = minetest.get_content_id(nodename)
-	local ignore_id = minetest.get_content_id("ignore")
-	local max_radius = radius * (radius + 1)
 	local nodes = {}
+	local ignore = minetest.get_content_id("ignore")
+	for i = 1, worldedit.volume(emerged_pos1, emerged_pos2) do
+		nodes[i] = ignore
+	end
+
+	--fill selected area with node
+	local node_id = minetest.get_content_id(nodename)
+	local max_radius = radius * (radius + 1)
+	local ystride, zstride = area.ystride, area.zstride
+	local x, y, z = -radius, 0, -radius
 	local count = 0
-	for x = -radius, radius do
+	for i in area:iterp(pos1, pos2) do
-		for y = 0, radius do
+		if x * x + y * y + z * z <= max_radius then --position is inside sphere
-			for z = -radius, radius do
+			nodes[i] = node_id
-				if x * x + y * y + z * z <= max_radius then --inside dome
+			count = count + 1
-					insert(nodes, node_id)
+		end
-					count = count + 1
+
-				else
+		--move to the next position
-					insert(nodes, ignore_id)
+		x = x + 1
-				end
+		if x > radius then
+			x = -radius
+			y = y + 1
+			if y > radius then
+				y = 0
+				z = z + 1
 			end
 		end
 	end
@@ -148,7 +196,7 @@ worldedit.dome = function(pos, radius, nodename) --wip: use bresenham sphere for
 end
 
 --adds a hollow cylinder at `pos` along the `axis` axis ("x" or "y" or "z") with length `length` and radius `radius`, composed of `nodename`, returning the number of nodes added
-worldedit.hollow_cylinder = function(pos, axis, length, radius, nodename)
+worldedit.hollow_cylinder = function(pos, axis, length, radius, nodename) --wip: rewrite this using voxelmanip
 	local other1, other2
 	if axis == "x" then
 		other1, other2 = "y", "z"
@@ -216,7 +264,7 @@ worldedit.hollow_cylinder = function(pos, axis, length, radius, nodename)
 end
 
 --adds a cylinder at `pos` along the `axis` axis ("x" or "y" or "z") with length `length` and radius `radius`, composed of `nodename`, returning the number of nodes added
-worldedit.cylinder = function(pos, axis, length, radius, nodename, env)
+worldedit.cylinder = function(pos, axis, length, radius, nodename, env) --wip: rewrite this using voxelmanip
 	local other1, other2
 	if axis == "x" then
 		other1, other2 = "y", "z"
@@ -281,7 +329,7 @@ worldedit.cylinder = function(pos, axis, length, radius, nodename, env)
 end
 
 --adds a pyramid centered at `pos` with height `height`, composed of `nodename`, returning the number of nodes added
-worldedit.pyramid = function(pos, height, nodename, env)
+worldedit.pyramid = function(pos, height, nodename, env) --wip: rewrite this using voxelmanip
 	local pos1x, pos1y, pos1z = pos.x - height, pos.y, pos.z - height
 	local pos2x, pos2y, pos2z = pos.x + height, pos.y + height, pos.z + height
 	local pos = {x=0, y=pos1y, z=0}

worldedit/queue.lua

@@ -12,41 +12,39 @@ minetest.register_globalstep(function(dtime)
     local elapsed = 0
     local env = minetest.env
     while worldedit.lower <= worldedit.higher and elapsed <= worldedit.MAXIMUM_TIME do
-	local entry = worldedit.queue[worldedit.lower]
+        local entry = worldedit.queue[worldedit.lower]
         if entry.t == "set_node" then
             env:set_node(entry.pos, entry.node)
-	    elapsed = elapsed + 0.0002
+            elapsed = elapsed + 0.0002
         elseif entry.t == "remove_node" then
             env:remove_node(entry.pos)
-	    elapsed = elapsed + 0.0002
+            elapsed = elapsed + 0.0002
         elseif entry.t == "place_node" then
             env:place_node(entry.pos, entry.node)
-	    elapsed = elapsed + 0.001
+            elapsed = elapsed + 0.001
         elseif entry.t == "dig_node" then
             env:dig_node(entry.pos)
-	    elapsed = elapsed + 0.001
+            elapsed = elapsed + 0.001
         elseif entry.t == "add_entity" then
             env:add_entity(entry.pos, entry.name)
-	    elapsed = elapsed + 0.005
+            elapsed = elapsed + 0.005
         elseif entry.t == "add_item" then
             env:add_item(entry.pos, entry.item)
-	    elapsed = elapsed + 0.005
+            elapsed = elapsed + 0.005
         elseif entry.t == "meta_from_table" then
             env:get_meta(entry.pos):from_table(entry.table)
-	    elapsed = elapsed + 0.0002
+            elapsed = elapsed + 0.0002
         else
             print("Unknown queue event type: " .. entry.t)
         end
         worldedit.queue[worldedit.lower] = nil
-	worldedit.lower = worldedit.lower + 1
+        worldedit.lower = worldedit.lower + 1
     end
 end)
 
-do
+worldedit.enqueue = function(value)
-	worldedit.enqueue = function(value)
+        worldedit.higher = worldedit.higher + 1
-		worldedit.higher = worldedit.higher + 1
+        worldedit.queue[worldedit.higher] = value
-		worldedit.queue[worldedit.higher] = value
-	end
 end
 
 function table.copy(t, seen)
@@ -123,4 +121,3 @@ worldedit.queue_aliasenv = {
     add_entity      = queue_addentity,
     add_item        = queue_additem,
 }
-

worldedit/serialization.lua

@@ -34,6 +34,10 @@ end
 
 --converts the region defined by positions `pos1` and `pos2` into a single string, returning the serialized data and the number of nodes serialized
 worldedit.serialize = function(pos1, pos2) --wip: check for ItemStacks and whether they can be serialized
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	manip:read_from_map(pos1, pos2)
+
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 	local pos = {x=pos1.x, y=0, z=0}
 	local count = 0
@@ -141,7 +145,24 @@ worldedit.allocate = function(originpos, value)
 			count = count + 1
 		end
 	elseif version == 4 then --current nested table format
-		local nodes = minetest.deserialize(value)
+		--wip: this is a filthy hack that works surprisingly well
+		value = value:gsub("return%s*{", "", 1):gsub("}%s*$", "", 1)
+		local escaped = value:gsub("\\\\", "@@"):gsub("\\\"", "@@"):gsub("(\"[^\"]*\")", function(s) return string.rep("@", #s) end)
+		local startpos, startpos1, endpos = 1, 1
+		local nodes = {}
+		while true do
+			startpos, endpos = escaped:find("},%s*{", startpos)
+			if not startpos then
+				break
+			end
+			local current = value:sub(startpos1, startpos)
+			table.insert(nodes, minetest.deserialize("return " .. current))
+			startpos, startpos1 = endpos, endpos
+		end
+		table.insert(nodes, minetest.deserialize("return " .. value:sub(startpos1)))
+
+		--local nodes = minetest.deserialize(value) --wip: this is broken for larger tables in the current version of LuaJIT
+
 		count = #nodes
 		for index = 1, count do
 			local entry = nodes[index]
@@ -161,7 +182,7 @@ end
 
 --loads the nodes represented by string `value` at position `originpos`, returning the number of nodes deserialized
 --contains code based on [table.save/table.load](http://lua-users.org/wiki/SaveTableToFile) by ChillCode, available under the MIT license (GPL compatible)
-worldedit.deserialize = function(originpos, value)
+worldedit.deserialize = function(originpos, value) --wip: use voxelmanip to make sure the blocks are loaded
 	local originx, originy, originz = originpos.x, originpos.y, originpos.z
 	local count = 0
 	local add_node, get_meta = minetest.add_node, minetest.get_meta

worldedit/visualization.lua

@@ -33,6 +33,10 @@ minetest.register_node("worldedit:placeholder", {
 
 --hides all nodes in a region defined by positions `pos1` and `pos2` by non-destructively replacing them with invisible nodes, returning the number of nodes hidden
 worldedit.hide = function(pos1, pos2)
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	manip:read_from_map(pos1, pos2)
+
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 	local pos = {x=pos1.x, y=0, z=0}
 	local placeholder = {name="worldedit:placeholder", param1=0, param2=0}
@@ -60,6 +64,10 @@ end
 
 --suppresses all instances of `nodename` in a region defined by positions `pos1` and `pos2` by non-destructively replacing them with invisible nodes, returning the number of nodes suppressed
 worldedit.suppress = function(pos1, pos2, nodename)
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	manip:read_from_map(pos1, pos2)
+
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 	local placeholder = {name="worldedit:placeholder", param1=0, param2=0}
 	local nodes = minetest.find_nodes_in_area(pos1, pos2, nodename)
@@ -77,7 +85,11 @@ worldedit.suppress = function(pos1, pos2, nodename)
 end
 
 --highlights all instances of `nodename` in a region defined by positions `pos1` and `pos2` by non-destructively hiding all other nodes, returning the number of nodes found
-worldedit.highlight = function(pos1, pos2, nodename) --wip: speed this up with voxmanip get_data
+worldedit.highlight = function(pos1, pos2, nodename) --wip: speed this up with voxmanip get_data to speed up searching
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	manip:read_from_map(pos1, pos2)
+
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 	local pos = {x=pos1.x, y=0, z=0}
 	local placeholder = {name="worldedit:placeholder", param1=0, param2=0}
@@ -110,6 +122,10 @@ end
 
 --restores all nodes hidden with WorldEdit functions in a region defined by positions `pos1` and `pos2`, returning the number of nodes restored
 worldedit.restore = function(pos1, pos2)
+	--make area stay loaded
+	local manip = minetest.get_voxel_manip()
+	manip:read_from_map(pos1, pos2)
+
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 	local node = {name="", param1=0, param2=0}
 	local nodes = minetest.find_nodes_in_area(pos1, pos2, "worldedit:placeholder")