Version MFF.

.luacheckrc

@@ -1,14 +0,0 @@
-unused_args = false
-allow_defined_top = true
-
-read_globals = {
-	"DIR_DELIM",
-	"minetest", "core",
-	"dump",
-	"vector", "nodeupdate",
-	"VoxelManip", "VoxelArea",
-	"PseudoRandom", "ItemStack",
-	"intllib",
-	"default",
-}
-

CHANGELOG.md

@@ -1,35 +0,0 @@
-# Changelog
-
-All notable changes to this project will be documented in this file.
-
-The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/)
-and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html).
-
-## [Unreleased]
-
-## [1.1.0] - 2017-10-04
-
-### Added
-
-- 3 new node shapes in the circular saw (thin slabs, available in
-  "L-shaped", "corner-shaped" and "U-shaped" variations), all with 1/16
-  thickness.
-- New Stairs+ nodes:
-  - Coral Skeleton
-  - Desert Sandstone, Silver Sandstone
-  - Desert Sandstone Brick, Silver Sandstone Brick
-  - Desert Sandstone Block, Silver Sandstone Block
-  - Obsidian Block
-  - Sandstone Block
-  - Stone Block, Desert Stone Block
-  - Straw
-  - Tin Block
-  - Wool (all colors)
-- Other mods can now get a list of all the defined Stairs+ shapes
-
-## [1.0.0] - 2017-02-19
-
-- Initial versioned release.
-
-[1.1.0]: https://github.com/minetest-mods/moreblocks/compare/v1.0.0...v1.1.0
-[Unreleased]: https://github.com/minetest-mods/moreblocks/compare/v1.0.0...HEAD

CONTRIBUTING.md

@@ -1,10 +0,0 @@
-# Contributing to More Blocks
-
-Thank you for your interest in More Blocks! Before contributing,
-be sure to know about these few guidelines:
-
-- Contributions have to be licensed under the zlib license (or compatible)
-  for code, and CC BY-SA 3.0 (or compatible) for assets.
-- Make sure to update the changelog, keeping the
-  [changelog format](http://keepachangelog.com/en/1.0.0/) we use.
-- Don't bump the version yourself. Maintainers will do this when necessary.

LICENSE.md

@@ -1,6 +1,7 @@
-# zlib license
+zlib license
+============
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors
+Copyright (c) 2011-2015 Calinou and contributors
 
 **This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.**
 

README.md

@@ -1,76 +1,11 @@
-# More Blocks
+More Blocks
+===========
 
-More Blocks for [Minetest](https://www.minetest.net/), a free and open source infinite
+More Blocks for Minetest <http://minetest.net>, a free/libre infinite
 world block sandbox game.
 
-[**Forum topic**](https://forum.minetest.net/viewtopic.php?f=11&t=509)
+To install, just clone this repository into your "mods" directory.
 
-## Installation
+More Blocks code is licensed under the zlib license, textures are by Calinou and are licensed under CC BY-SA 3.0 Unported.
 
-### Download the mod
-
-To install More Blocks, clone this Git repository into your Minetest's `mods/`
-directory:
-
-```
-git clone https://github.com/minetest-mods/moreblocks.git
-```
-
-You can also
-[download a ZIP archive](https://github.com/minetest-mods/moreblocks/archive/master.zip)
-of More Blocks. If you do so, you will need to extract the archive, then rename
-the resulting folder from `moreblocks-master` to `moreblocks` – this is
-**absolutely** necessary to do, else, it won't work!
-
-### Enable the mod
-
-Once you have installed More Blocks, you need to enable it in Minetest.
-The procedure is as follows:
-
-#### Using the client's main menu
-
-This is the easiest way to enable More Blocks when playing in singleplayer
-(or on a server hosted from a client).
-
-1. Start Minetest and switch to the **Local Game** tab.
-2. Select the world you want to enable More Blocks in.
-3. Click **Configure**, then enable `moreblocks` by double-clicking it
-   (or ticking the **Enabled** checkbox).
-4. Save the changes, then start a game on the world you enabled More Blocks on.
-5. More Blocks should now be running on your world.
-
-#### Using a text editor
-
-This is the recommended way to enable the mod on a server without using a GUI.
-
-1. Make sure Minetest is not currently running (else, it will overwrite
-   the changes when exiting).
-2. Open the world's `world.mt` file using a text editor.
-3. Add the following line at the end of the file:
-
-```
-load_mod_moreblocks = true
-```
-
-If the line is already present in the file, then replace `false` with `true` on that line.
-
-4. Save the file, then start a game on the world you enabled More Blocks on.
-5. More Blocks should now be running on your world.
-
-## Version compatibility
-
-More Blocks is currently primarily tested with Minetest 0.4.16.
-It may or may not work with newer or older versions. Issues arising in older
-versions than 0.4.16 will generally not be fixed.
-
-## License
-
-Copyright © 2011-2017 Hugo Locurcio and contributors
-
-- More Blocks code is licensed under the zlib license, see
-  [`LICENSE.md`](LICENSE.md) for details.
-- Unless otherwise specified, More Blocks textures are licensed under
-  [CC BY-SA 3.0 Unported](https://creativecommons.org/licenses/by-sa/3.0/).
-
-`moreblocks_copperpatina.png` was created by pithydon, and is licensed under
-[CC0 1.0 Universal](https://creativecommons.org/publicdomain/zero/1.0/).
+**Forum topic:** <https://forum.minetest.net/viewtopic.php?f=11&t=509>

aliases.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: alias definitions
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -10,6 +10,37 @@ minetest.register_alias("sweeper", "moreblocks:sweeper")
 minetest.register_alias("circular_saw", "moreblocks:circular_saw")
 minetest.register_alias("jungle_stick", "moreblocks:jungle_stick")
 
+-- Wrong drops
+
+-- //MFF(Mg|10/11/15)
+
+-- Microblocks
+for _,i in pairs({"", "_1", "_2", "_4", "_12", "_14", "_15"}) do
+	minetest.register_alias("moreblocks:micro_clay_brick" .. i, "moreblocks:micro_brick" .. i)
+end
+
+-- Panels
+for _,i in pairs({"", "_1", "_2", "_4", "_12", "_14", "_15"}) do
+	minetest.register_alias("moreblocks:panel_clay_brick" .. i, "moreblocks:panel_brick" .. i)
+end
+
+-- Slabs
+for _,i in pairs({"", "_1", "_2", "_quarter", "_three_quarter", "_14", "_15"}) do
+	minetest.register_alias("moreblocks:slab_clay_brick" .. i, "moreblocks:slab_brick" .. i)
+end
+
+-- Stairs
+for _,i in pairs({"", "_outer", "_inner", "_alt", "_alt_1", "_alt_2", "_alt_4", "_half"}) do
+	minetest.register_alias("moreblocks:stair_clay_brick" .. i, "moreblocks:stair_brick" .. i)
+end
+
+-- Slopes
+for _,i in pairs({"", "_half", "_half_raised", "_outer", "_outer_cut", "_outer_cut_half", "_outer_half", "_outer_half_raised", "_inner", "_inner_half", "_inner_half_raised"}) do
+	minetest.register_alias("moreblocks:slope_clay_brick" .. i, "moreblocks:slope_brick" .. i)
+end
+
+
+
 -- Old block/item replacement:
 minetest.register_alias("moreblocks:oerkkiblock", "default:mossycobble")
 minetest.register_alias("moreblocks:screwdriver", "screwdriver:screwdriver")
@@ -19,8 +50,6 @@ minetest.register_alias("moreblocks:stone_bricks", "default:stonebrick")
 minetest.register_alias("moreblocks:stonebrick", "default:stonebrick")
 minetest.register_alias("moreblocks:junglewood", "default:junglewood")
 minetest.register_alias("moreblocks:jungle_wood", "default:junglewood")
-minetest.register_alias("moreblocks:fence_jungle_wood", "default:fence_junglewood")
-minetest.register_alias("moreblocks:jungle_stick", "default:stick")
 
 for _, t in pairs(circular_saw.names) do
 	minetest.register_alias("moreblocks:" .. t[1] .. "_jungle_wood" .. t[2],
@@ -61,19 +90,17 @@ minetest.register_alias("moreblocks:allfacestree","moreblocks:all_faces_tree")
 local horizontal_tree_convert_facedir = {7, 12, 9, 18}
 
 minetest.register_abm({
-	nodenames = {"moreblocks:horizontal_tree","moreblocks:horizontal_jungle_tree"},
+	nodenames = {"moreblocks:horizontal_tree"},
 	interval = 1,
 	chance = 1,
 	action = function(pos, node)
-		if node.name == "moreblocks:horizontal_tree" then
-			node.name = "default:tree"
-		else
-			node.name = "default:jungletree"
-		end
 		node.param2 = node.param2 < 3 and node.param2 or 0
 		minetest.set_node(pos, {
-			name = node.name,
+			name = "default:tree",
 			param2 = horizontal_tree_convert_facedir[node.param2 + 1]
 		})
 	end,
 })
+
+minetest.register_alias("moreblocks:jungle_stick", "default:stick")
+minetest.register_alias("moreblocks:fence_jungle_wood", "default:fence_junglewood")

circular_saw.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: circular saw
 
-Copyright (c) 2011-2017 Hugo Locurcio, Sokomine and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -26,45 +26,35 @@ circular_saw.cost_in_microblocks = {
 	1, 1, 1, 1, 1, 1, 1, 2,
 	2, 3, 2, 4, 2, 4, 5, 6,
 	7, 1, 1, 2, 4, 6, 7, 8,
-	1, 2, 2, 3, 1, 1, 2, 4,
-	4, 2, 6, 7, 3, 7, 7, 4,
-	8, 3, 2, 6, 2, 1, 3, 4
+	3, 1, 1, 2, 4, 4, 2, 6,
+	7, 3, 7, 7, 4, 8, 3, 2,
+	6, 2, 1, 3, 4,
 }
 
+-- This parameter is legacy node
 circular_saw.names = {
 	{"micro", "_1"},
 	{"panel", "_1"},
-	{"micro", "_2"},
-	{"panel", "_2"},
-	{"micro", "_4"},
-	{"panel", "_4"},
 	{"micro", ""},
 	{"panel", ""},
 
 	{"micro", "_12"},
 	{"panel", "_12"},
-	{"micro", "_14"},
-	{"panel", "_14"},
 	{"micro", "_15"},
 	{"panel", "_15"},
+
 	{"stair", "_outer"},
 	{"stair", ""},
-
 	{"stair", "_inner"},
+
 	{"slab", "_1"},
-	{"slab", "_2"},
 	{"slab", "_quarter"},
 	{"slab", ""},
 	{"slab", "_three_quarter"},
-	{"slab", "_14"},
 	{"slab", "_15"},
 
-	{"slab", "_two_sides"},
-	{"slab", "_three_sides"},
-	{"slab", "_three_sides_u"},
 	{"stair", "_half"},
 	{"stair", "_alt_1"},
-	{"stair", "_alt_2"},
 	{"stair", "_alt_4"},
 	{"stair", "_alt"},
 
@@ -76,7 +66,6 @@ circular_saw.names = {
 	{"slope", "_inner_half_raised"},
 	{"slope", "_inner_cut"},
 	{"slope", "_inner_cut_half"},
-
 	{"slope", "_inner_cut_half_raised"},
 	{"slope", "_outer"},
 	{"slope", "_outer_half"},
@@ -108,6 +97,7 @@ function circular_saw:get_output_inv(modname, material, amount, max)
 
 	for i = 1, #circular_saw.names do
 		local t = circular_saw.names[i]
+		if not t[3] then
 			local cost = circular_saw.cost_in_microblocks[i]
 			local balance = math.min(math.floor(amount/cost), max)
 			local nodename = modname .. ":" .. t[1] .. "_" .. material .. t[2]
@@ -116,6 +106,7 @@ function circular_saw:get_output_inv(modname, material, amount, max)
 				list[pos] = nodename .. " " .. balance
 			end
 		end
+	end
 	return list
 end
 
@@ -335,6 +326,8 @@ function circular_saw.on_metadata_inventory_take(
 	-- The recycle field plays no role here since it is processed immediately.
 end
 
+gui_slots = "listcolors[#606060AA;#808080;#101010;#202020;#FFF]"
+
 function circular_saw.on_construct(pos)
 	local meta = minetest.get_meta(pos)
 	local fancy_inv = default.gui_bg..default.gui_bg_img..default.gui_slots

config.lua

@@ -1,14 +1,14 @@
 --[[
 More Blocks: configuration handling
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
 moreblocks.config = {}
 
 local function getbool_default(setting, default)
-	local value = minetest.settings:get_bool(setting)
+	local value = minetest.setting_getbool(setting)
 	if value == nil then
 		value = default
 	end
@@ -21,7 +21,7 @@ local function setting(settingtype, name, default)
 			getbool_default("moreblocks." .. name, default)
 	else
 		moreblocks.config[name] =
-			minetest.settings:get("moreblocks." .. name) or default
+			minetest.setting_get("moreblocks." .. name) or default
 	end
 end
 

crafting.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: crafting recipes
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -23,8 +23,10 @@ minetest.register_craft({
 minetest.register_craft({
 	output = "default:wood",
 	recipe = {
-		{"default:stick", "default:stick"},
-		{"default:stick", "default:stick"},
+		{"default:stick", "default:stick", "default:stick"},
+		{"default:stick", "default:stick", "default:stick"},
+		{"default:stick", "default:stick", "default:stick"}
+		-- MODIFICATION MADE FOR MFF ^
 	}
 })
 
@@ -186,8 +188,6 @@ minetest.register_craft({
 	output = "moreblocks:empty_bookshelf",
 	type = "shapeless",
 	recipe = {"moreblocks:sweeper", "default:bookshelf"},
-	replacements = {{"default:bookshelf", "default:book 3"}},
-	-- When obtaining an empty bookshelf, return the books used in it as well
 })
 
 minetest.register_craft({
@@ -421,14 +421,14 @@ minetest.register_craft({
 minetest.register_craft({
 	output = "moreblocks:cobble_compressed",
 	recipe = {
-		{"default:cobble", "default:cobble", "default:cobble"},
-		{"default:cobble", "default:cobble", "default:cobble"},
-		{"default:cobble", "default:cobble", "default:cobble"},
+		{"default:cobble"},
+		{"default:cobble"},
+		-- MODIFICATION MADE FOR MFF
 	}
 })
 
 minetest.register_craft({
-	output = "default:cobble 9",
+	output = "default:cobble 2", -- MODIFICATION MADE FOR MFF
 	recipe = {
 		{"moreblocks:cobble_compressed"},
 	}
@@ -438,23 +438,7 @@ minetest.register_craft({
 	type = "cooking", output = "moreblocks:tar", recipe = "default:gravel",
 })
 
-minetest.register_craft({
-	type = "shapeless",
-	output = "moreblocks:copperpatina",
-	recipe = {"bucket:bucket_water", "default:copperblock"},
-	replacements = {
-		{"bucket:bucket_water", "bucket:bucket_empty"}
-	}
-})
-
-minetest.register_craft({
-	output = "default:copper_ingot 9",
-	recipe = {
-		{"moreblocks:copperpatina"},
-	}
-})
-
-if minetest.settings:get_bool("moreblocks.circular_saw_crafting") ~= false then -- “If nil or true then”
+if minetest.setting_getbool("moreblocks.circular_saw_crafting") ~= false then -- “If nil or true then”
 	minetest.register_craft({
 		output = "moreblocks:circular_saw",
 		recipe = {
@@ -464,3 +448,30 @@ if minetest.settings:get_bool("moreblocks.circular_saw_crafting") ~= false then
 		}
 	})
 end
+
+-- MODIFICATION MADE FOR MFF //MFF(Mg|08/09/15)
+
+
+minetest.register_craft({
+	output = "moreblocks:horizontal_jungle_tree 2",
+	recipe = {
+		{"default:jungletree", "", "default:jungletree"},
+	}
+})
+
+minetest.register_craft({
+	output = "default:jungletree 2",
+	recipe = {
+		{"moreblocks:horizontal_jungle_tree"},
+		{"moreblocks:horizontal_jungle_tree"},
+	}
+})
+
+minetest.register_craft({
+	output = "default:junglewood 4",
+	recipe = {
+		{"moreblocks:horizontal_jungle_tree"},
+	}
+})
+
+-- END OF MODIFICATIONS

depends.txt

@@ -1,4 +1,2 @@
 default
 intllib?
-farming?
-wool?

init.lua

@@ -3,7 +3,7 @@
 ** More Blocks **
 By Calinou, with the help of ShadowNinja and VanessaE.
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 =====================================================================
 --]]
@@ -11,12 +11,8 @@ Licensed under the zlib license. See LICENSE.md for more information.
 moreblocks = {}
 
 local S
-if minetest.global_exists("intllib") then
-	if intllib.make_gettext_pair then
-		S = intllib.make_gettext_pair()
-	else
+if minetest.get_modpath("intllib") then
 	S = intllib.Getter()
-	end
 else
 	S = function(s) return s end
 end
@@ -32,6 +28,6 @@ dofile(modpath .. "/redefinitions.lua")
 dofile(modpath .. "/crafting.lua")
 dofile(modpath .. "/aliases.lua")
 
-if minetest.settings:get_bool("log_mods") then
+if minetest.setting_getbool("log_mods") then
 	minetest.log("action", S("[moreblocks] loaded."))
 end

locale/it.txt

@@ -1,70 +0,0 @@
-#
-# Italian translation
-# Translator: Emon
-#
-
-
-###init.lua###
-[moreblocks] loaded. = [moreblocks] caricato.
-
-###nodes.lua###
-Jungle Wood Fence = Recinzione in legno della giungla
-Empty Bookshelf = Libreria vuota
-Clean Glass = Vetro pulito
-Plankstone = Pietra e legno
-Wooden Tile = Mattonella in legno
-Full Wooden Tile = Mattonella in legno pieno
-Centered Wooden Tile = Mattonella in legno centrata
-Up Wooden Tile = Mattonella in legno verso l'alto
-Down Wooden Tile = Mattonella in legno verso il basso
-Left Wooden Tile = Mattonella in legno verso sinistra
-Right Wooden Tile = Mattonella in legno verso destra
-Circle Stone Bricks = Mattoni concentrici in pietra
-Stone Tile = Mattonella in pietra
-Split Stone Tile = Mattonella in pietra divisa
-Glow Glass = Vetro luminoso
-Super Glow Glass = Super vetro luminoso
-Coal Glass = Vetro e carbone
-Iron Glass = Vetro e ferro
-Coal Checker = Scacchiera in carbone
-Iron Checker = Scacchiera in ferro
-Trap Stone = Pietra trappola
-Trap Glass = Vetro trappola
-Trap Glow Glass = Vetro luminoso trappola
-Trap Super Glow Glass = Super vetro luminoso trappola
-Coal Stone = Pietra in carbone
-Iron Stone = Pietra in ferro 
-Coal Stone Bricks = Mattoni di pietra in carbone
-Iron Stone Bricks = Mattoni di pietra in ferro
-Cactus Checker = Scacchiera in cactus
-Cactus Brick = Mattoni di cactus
-Sweeper = Spazzola
-Jungle Stick = Bastone in legno della giungla
-Rope = Corda
-All-faces Tree = Albero su ogni lato
-
-###circular_saw.lua###
-Circular Saw = Sega circolare
-Circular saw, empty (owned by %s) = Sega circolare, vuota (di proprietà di %s)
-Circular saw, working with %s (owned by %s) = Sega circolare, in funzione su %s (di proprietà di %s)
-Circular saw, empty = Sega circolare, vuota
-Circular saw is empty (owned by %s) = La sega circolare è vuota (di proprietà di %s)
-
-Input\nmaterial = Materiale\niniziale
-Left-over = Scarto
-Max = Max.
-Set = Imp.
-Recycle\noutput = Ricicla\nfinale
-
-###ownership.lua###
-someone = qualcuno
-Sorry, %s owns that spot. = Spiacente, quel punto è di proprietà di %s
-
-###./stairsplus/*###
-%s Stairs = Scale - %s
-%s Slab =  Lastra - %s
-%s Panel = Pannello - %s
-%s Microblock = Microblocco %s
-
-%s Pane = Pannello - %s
-%s Fence = Recinzione - %s

models/moreblocks_slope.obj

@@ -1,56 +1,26 @@
-g top
-v 0.500000 0.500000 0.500000
-v -0.500000 0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 -0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 0.7071 -0.7071
-s off
-f 2/1/1 1/2/1 4/3/1 3/4/1
-g bottom
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 6/5/2 5/6/2 7/7/2 8/8/2
-g right
-v -0.500000 0.500000 0.500000
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 1.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn -1.0000 0.0000 0.0000
-s off
-f 9/9/3 11/10/3 10/11/3
-g left
-v 0.500000 0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 1.0000 0.0000 0.0000
-s off
-f 12/12/4 13/13/4 14/14/4
-g back
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope.mtl
+o Cube_Cube.002
 v 0.500000 0.500000 0.500000
 v -0.500000 0.500000 0.500000
 v -0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -0.0000 1.0000
+v -0.500000 -0.500000 -0.500000
+v 0.500000 -0.500000 -0.500000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vn 0.000000 -0.000000 1.000000
+vn 0.000000 -1.000000 -0.000000
+vn -1.000000 0.000000 0.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 0.707100 -0.707100
+usemtl None
 s off
-f 15/15/5 16/16/5 17/17/5 18/18/5
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 4/3/2 3/4/2 5/1/2 6/2/2
+f 2/1/3 5/3/3 3/4/3
+f 1/2/4 4/3/4 6/4/4
+f 2/1/5 1/2/5 6/3/5 5/4/5

models/moreblocks_slope_cut.obj

@@ -1,68 +1,33 @@
-g top
-v 0.500000 0.500000 0.500000
-v -0.500000 -0.000000 0.500000
-v 0.500000 0.000000 -0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.5000 0.0000
-vt 1.0000 1.0000
-vt 0.5000 2.0000
-vt 0.0000 1.0000
-vn -0.4082 0.8165 -0.4082
-s 1
-f 4/1/1 2/2/1 1/3/1 3/4/1
-g bottom
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 -0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -1.0000 -0.0000
-s 1
-f 6/5/2 5/6/2 8/7/2 7/8/2
-g right
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.000000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 0.5000
-vn -1.0000 0.0000 0.0000
-s 1
-f 11/9/3 9/10/3 10/11/3
-g left
-v 0.500000 -0.500000 0.500000
-v 0.500000 0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v 0.500000 0.000000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 0.5000
-vt 0.0000 1.0000
-vn 1.0000 0.0000 0.0000
-s 1
-f 12/12/4 14/13/4 15/14/4 13/15/4
-g back
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_cut.mtl
+o moreblocks_slope_cut
 v -0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 0.500000
 v 0.500000 0.500000 0.500000
 v -0.500000 -0.000000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 0.5000
-vn -0.0000 -0.0000 1.0000
-s 1
-f 16/16/5 17/17/5 18/18/5 19/19/5
-g front
 v 0.500000 -0.500000 -0.500000
 v 0.500000 0.000000 -0.500000
 v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 0.0000 0.5000
-vn 0.0000 0.0000 -1.0000
-s 1
-f 20/20/6 22/21/6 21/22/6
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 1.000000 1.000000
+vt 0.000000 0.500000
+vt 1.000000 0.500000
+vt 0.000000 1.000000
+vt 0.500000 0.000000
+vt 0.500000 2.000000
+vn 0.000000 -0.000000 1.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 -1.000000 -0.000000
+vn -0.408200 0.816500 -0.408200
+vn 0.000000 0.000000 -1.000000
+vn -1.000000 0.000000 0.000000
+usemtl None
+s off
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 2/1/2 5/2/2 6/5/2 3/6/2
+f 2/3/3 1/6/3 7/1/3 5/2/3
+f 7/7/4 4/3/4 3/8/4 6/6/4
+f 5/1/5 7/2/5 6/4/5
+f 7/1/6 1/2/6 4/5/6

models/moreblocks_slope_half.obj

@@ -1,56 +1,28 @@
-g top
-v 0.500000 -0.000000 0.500000
-v -0.500000 -0.000000 0.500000
-v -0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 -0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 0.8944 -0.4472
-s off
-f 2/1/1 1/2/1 4/3/1 3/4/1
-g bottom
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 6/5/2 5/6/2 7/7/2 8/8/2
-g right
-v -0.500000 -0.000000 0.500000
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 1.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn -1.0000 0.0000 0.0000
-s off
-f 9/9/3 11/10/3 10/11/3
-g left
-v 0.500000 -0.000000 0.500000
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 1.0000 0.0000 0.0000
-s off
-f 12/12/4 13/13/4 14/14/4
-g back
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_half.mtl
+o Cube_Cube.002
 v 0.500000 -0.000000 0.500000
 v -0.500000 -0.000000 0.500000
 v -0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 0.500000
-vt 1.0000 0.5000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -0.0000 1.0000
+v -0.500000 -0.500000 -0.500000
+v 0.500000 -0.500000 -0.500000
+vt 1.000000 0.500000
+vt 0.000000 0.500000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vn 0.000000 -0.000000 1.000000
+vn 0.000000 -1.000000 -0.000000
+vn -1.000000 0.000000 0.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 0.894400 -0.447200
+usemtl None
 s off
-f 15/15/5 16/16/5 17/17/5 18/18/5
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 4/3/2 3/4/2 5/5/2 6/6/2
+f 2/1/3 5/3/3 3/4/3
+f 1/2/4 4/3/4 6/4/4
+f 2/5/5 1/6/5 6/3/5 5/4/5

models/moreblocks_slope_half_raised.obj

@@ -1,72 +1,32 @@
-g top
-v -0.500000 0.500000 0.500000
-v -0.500000 0.000000 -0.500000
-v 0.500000 0.000000 -0.500000
-v 0.500000 0.500000 0.500000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vn 0.0000 0.8944 -0.4472
-s off
-f 2/1/1 1/2/1 4/3/1 3/4/1
-g bottom
-v -0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 0.500000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 6/5/2 5/6/2 7/7/2 8/8/2
-g right
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_half_raised.mtl
+o Cube.001
 v -0.500000 0.500000 0.500000
 v -0.500000 0.000000 -0.500000
 v -0.500000 -0.500000 -0.500000
 v -0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn -1.0000 0.0000 0.0000
-s off
-f 9/9/3 10/10/3 11/11/3 12/12/3
-g left
 v 0.500000 0.000000 -0.500000
 v 0.500000 -0.500000 -0.500000
 v 0.500000 0.500000 0.500000
 v 0.500000 -0.500000 0.500000
-vt 1.0000 0.5000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 1.0000 0.0000 0.0000
+vt 1.000000 1.000000
+vt 0.000000 0.500000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 1.000000 0.500000
+vt 0.000000 1.000000
+vn -1.000000 0.000000 0.000000
+vn 0.000000 0.000000 -1.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 -0.000000 1.000000
+vn 0.000000 -1.000000 -0.000000
+vn 0.000000 0.894400 -0.447200
+usemtl None.001
 s off
-f 13/13/4 15/14/4 16/15/4 14/16/4
-g back
-v -0.500000 0.500000 0.500000
-v -0.500000 -0.500000 0.500000
-v 0.500000 0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -0.0000 1.0000
-s off
-f 19/17/5 17/18/5 18/19/5 20/20/5
-g front
-v -0.500000 0.000000 -0.500000
-v -0.500000 -0.500000 -0.500000
-v 0.500000 0.000000 -0.500000
-v 0.500000 -0.500000 -0.500000
-vt 1.0000 0.5000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 0.0000 -1.0000
-s off
-f 21/21/6 23/22/6 24/23/6 22/24/6
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 2/5/2 5/2/2 6/3/2 3/4/2
+f 5/5/3 7/6/3 8/3/3 6/4/3
+f 7/1/4 1/6/4 4/3/4 8/4/4
+f 4/4/5 3/1/5 6/6/5 8/3/5
+f 2/4/6 1/1/6 7/6/6 5/3/6

models/moreblocks_slope_inner.obj

@@ -1,81 +1,35 @@
-g top
-v 0.500000 0.500000 -0.500000
-v 0.500000 0.500000 0.500000
-v -0.500000 0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 -0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vn 0.0000 0.7071 -0.7071
-vn -0.7071 0.7071 0.0000
-s 1
-f 3/1/1 2/2/1 4/3/1
-f 2/4/2 1/5/2 5/6/2
-g bottom
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -1.0000 -0.0000
-s 1
-f 9/7/3 7/8/3 6/9/3 8/10/3
-l 8 10
-g right
-v -0.500000 0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn -1.0000 0.0000 0.0000
-s 1
-f 11/11/4 12/12/4 13/13/4
-g left
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_inner.mtl
+o Cube_Cube.000
 v 0.500000 0.500000 -0.500000
 v 0.500000 0.500000 0.500000
 v 0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 1.0000 0.0000 0.0000
-s 1
-f 14/14/5 15/15/5 16/16/5 17/17/5
-l 15 18
-g back
-v 0.500000 0.500000 0.500000
-v 0.500000 -0.500000 0.500000
 v -0.500000 0.500000 0.500000
+v -0.500000 -0.500000 -0.500000
 v -0.500000 -0.500000 0.500000
+v -0.500000 -0.500000 -0.500000
 v 0.500000 -0.500000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 -0.0000 1.0000
-s 1
-f 22/18/6 20/19/6 19/20/6 21/21/6
-l 22 23
-l 19 23
-g front
-v 0.500000 0.500000 -0.500000
-v 0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 0.0000 -1.0000
-s 1
-f 24/22/7 25/23/7 27/24/7
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vn 1.000000 0.000000 0.000000
+vn -1.000000 0.000000 0.000000
+vn 0.000000 0.707100 -0.707100
+vn 0.000000 0.000000 -1.000000
+vn 0.000000 -1.000000 -0.000000
+vn 0.000000 -0.000000 1.000000
+vn -0.707100 0.707100 0.000000
+usemtl None
+s off
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 5/1/2 6/3/2 7/4/2
+f 5/1/3 2/2/3 6/4/3
+f 1/2/4 4/3/4 8/4/4
+f 8/1/5 4/2/5 3/3/5 7/4/5
+f 7/3/6 3/4/6 2/1/6 5/2/6
+f 2/1/7 1/2/7 8/3/7
+l 7 9
+l 2 9

models/moreblocks_slope_inner_cut.obj

@@ -1,72 +1,32 @@
-g top
-v 0.500000 0.500000 -0.500000
-v 0.500000 0.500000 0.500000
-v -0.500000 0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.5000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 1.0000 0.0000
-vn -0.5774 0.5774 -0.5774
-s 1
-f 3/1/1 2/2/1 1/3/1
-f 4/4/2 3/5/2 1/6/2
-g bottom
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 -1.0000 -0.0000
-s 1
-f 6/7/3 5/8/3 7/9/3 8/10/3
-g right
-v -0.500000 -0.500000 0.500000
-v -0.500000 0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vn -1.0000 0.0000 0.0000
-s 1
-f 11/11/4 9/12/4 10/13/4
-g left
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_inner_cut.mtl
+o moreblocks_slope_inner_cut
 v 0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 -0.500000
 v 0.500000 0.500000 -0.500000
 v 0.500000 0.500000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 1.0000 0.0000 0.0000
-s 1
-f 12/14/5 13/15/5 14/16/5 15/17/5
-g back
-v 0.500000 -0.500000 0.500000
-v 0.500000 0.500000 0.500000
 v -0.500000 -0.500000 0.500000
 v -0.500000 0.500000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 -0.0000 1.0000
-s 1
-f 18/18/6 16/19/6 17/20/6 19/21/6
-g front
-v 0.500000 -0.500000 -0.500000
-v 0.500000 0.500000 -0.500000
 v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 0.0000 1.0000
-vn 0.0000 0.0000 -1.0000
-s 1
-f 20/22/7 22/23/7 21/24/7
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 0.500000 0.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 -0.000000 1.000000
+vn 0.000000 -1.000000 -0.000000
+vn 0.000000 1.000000 0.000000
+vn -1.000000 0.000000 0.000000
+vn 0.000000 0.000000 -1.000000
+vn -0.577400 0.577400 -0.577400
+usemtl None
+s off
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 5/1/2 1/2/2 4/3/2 6/4/2
+f 2/1/3 1/2/3 5/3/3 7/4/3
+f 6/1/4 4/2/4 3/3/4
+f 7/1/5 5/2/5 6/3/5
+f 2/1/6 7/2/6 3/4/6
+f 7/5/7 6/3/7 3/4/7

models/moreblocks_slope_inner_cut_half.obj

@@ -1,72 +1,34 @@
-g top
-v 0.500000 0.000000 -0.500000
-v 0.500000 -0.000000 0.500000
-v -0.500000 -0.000000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.5000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 1.0000 0.0000
-vn -0.4082 0.8165 -0.4082
-s 1
-f 3/1/1 2/2/1 1/3/1
-f 4/4/2 3/5/2 1/6/2
-g bottom
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 -1.0000 -0.0000
-s 1
-f 6/7/3 5/8/3 7/9/3 8/10/3
-g right
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.000000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 0.5000
-vn -1.0000 0.0000 0.0000
-s 1
-f 11/11/4 9/12/4 10/13/4
-g left
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_inner_cut_half.mtl
+o moreblocks_slope_inner_cut_half
 v 0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 -0.500000
 v 0.500000 0.000000 -0.500000
 v 0.500000 -0.000000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 0.5000
-vt 0.0000 0.5000
-vn 1.0000 0.0000 0.0000
-s 1
-f 12/14/5 13/15/5 14/16/5 15/17/5
-g back
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.000000 0.500000
 v -0.500000 -0.500000 0.500000
 v -0.500000 -0.000000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 0.5000
-vt 0.0000 0.5000
-vn 0.0000 -0.0000 1.0000
-s 1
-f 18/18/6 16/19/6 17/20/6 19/21/6
-g front
-v 0.500000 -0.500000 -0.500000
-v 0.500000 0.000000 -0.500000
 v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 0.0000 0.5000
-vn 0.0000 0.0000 -1.0000
-s 1
-f 20/22/7 22/23/7 21/24/7
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 1.000000 0.500000
+vt 0.000000 0.500000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 0.500000 0.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 -0.000000 1.000000
+vn 0.000000 -1.000000 -0.000000
+vn 0.000000 1.000000 0.000000
+vn -1.000000 0.000000 0.000000
+vn 0.000000 0.000000 -1.000000
+vn -0.408200 0.816500 -0.408200
+usemtl None
+s off
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 5/1/2 1/2/2 4/3/2 6/4/2
+f 2/1/3 1/2/3 5/5/3 7/6/3
+f 6/1/4 4/2/4 3/5/4
+f 7/1/5 5/2/5 6/3/5
+f 2/1/6 7/2/6 3/4/6
+f 7/7/7 6/5/7 3/6/7

models/moreblocks_slope_inner_cut_half_raised.obj

@@ -1,76 +1,35 @@
-g top
-v 0.500000 0.500000 -0.500000
-v 0.500000 0.500000 0.500000
-v -0.500000 0.500000 0.500000
-v -0.500000 0.000000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.5000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 1.0000 0.0000
-vn -0.4082 0.8165 -0.4082
-s 1
-f 3/1/1 2/2/1 1/3/1
-f 4/4/2 3/5/2 1/6/2
-g bottom
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 -1.0000 -0.0000
-s 1
-f 6/7/3 5/8/3 7/9/3 8/10/3
-g right
-v -0.500000 -0.500000 0.500000
-v -0.500000 0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v -0.500000 0.000000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 0.5000
-vn -1.0000 0.0000 0.0000
-s 1
-f 11/11/4 9/12/4 10/13/4 12/14/4
-g left
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_inner_cut_half_raised.mtl
+o moreblocks_slope_inner_cut_half_raised
 v 0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 -0.500000
 v 0.500000 0.500000 -0.500000
 v 0.500000 0.500000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 1.0000 0.0000 0.0000
-s 1
-f 13/15/5 14/16/5 15/17/5 16/18/5
-g back
-v 0.500000 -0.500000 0.500000
-v 0.500000 0.500000 0.500000
 v -0.500000 -0.500000 0.500000
 v -0.500000 0.500000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 -0.0000 1.0000
-s 1
-f 19/19/6 17/20/6 18/21/6 20/22/6
-g front
-v 0.500000 -0.500000 -0.500000
-v 0.500000 0.500000 -0.500000
 v -0.500000 -0.500000 -0.500000
 v -0.500000 0.000000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 0.5000
-vt 0.0000 1.0000
-vn -0.0000 0.0000 -1.0000
-s 1
-f 21/23/7 23/24/7 24/25/7 22/26/7
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 0.000000 0.500000
+vt 1.000000 0.500000
+vt 0.500000 0.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 -0.000000 1.000000
+vn 0.000000 -1.000000 -0.000000
+vn 0.000000 1.000000 0.000000
+vn -1.000000 0.000000 0.000000
+vn -0.000000 0.000000 -1.000000
+vn -0.408200 0.816500 -0.408200
+usemtl None
+s off
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 5/1/2 1/2/2 4/3/2 6/4/2
+f 2/1/3 1/2/3 5/3/3 7/4/3
+f 6/1/4 4/2/4 3/3/4
+f 7/1/5 5/2/5 6/3/5 8/5/5
+f 2/1/6 7/2/6 8/6/6 3/4/6
+f 8/7/7 6/3/7 3/4/7

models/moreblocks_slope_inner_half.obj

@@ -1,85 +1,35 @@
-g top
-v 0.500000 0.000000 -0.500000
-v 0.500000 -0.000000 0.500000
-v -0.500000 -0.000000 0.500000
-v -0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 -0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vn 0.0000 0.8944 -0.4472
-vn -0.4472 0.8944 0.0000
-s off
-f 3/1/1 2/2/1 4/3/1
-f 2/4/2 1/5/2 5/6/2
-g bottom
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 10/7/3 7/8/3 6/9/3 9/10/3
-l 9 8
-l 11 9
-g right
-v -0.500000 -0.000000 0.500000
-v -0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-vt 1.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn -1.0000 0.0000 0.0000
-s off
-f 12/11/4 13/12/4 14/13/4
-l 15 14
-g left
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_inner_half.mtl
+o Cube_Cube.001
 v 0.500000 0.000000 -0.500000
 v 0.500000 -0.000000 0.500000
 v 0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 1.0000 0.0000 0.0000
-s off
-f 16/14/5 17/15/5 18/16/5 19/17/5
-l 20 17
-g back
-v 0.500000 -0.000000 0.500000
-v 0.500000 -0.500000 0.500000
 v -0.500000 -0.000000 0.500000
+v -0.500000 -0.500000 -0.500000
 v -0.500000 -0.500000 0.500000
+v -0.500000 -0.500000 -0.500000
 v 0.500000 -0.500000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 -0.0000 1.0000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vn 1.000000 0.000000 0.000000
+vn -1.000000 0.000000 0.000000
+vn 0.000000 0.894400 -0.447200
+vn 0.000000 0.000000 -1.000000
+vn 0.000000 -1.000000 -0.000000
+vn 0.000000 -0.000000 1.000000
+vn -0.447200 0.894400 0.000000
+usemtl None.002
 s off
-f 24/18/6 22/19/6 21/20/6 23/21/6
-l 25 24
-l 25 21
-g front
-v 0.500000 0.000000 -0.500000
-v 0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 0.0000 -1.0000
-s off
-f 26/22/7 27/23/7 29/24/7
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 5/1/2 6/3/2 7/4/2
+f 5/1/3 2/2/3 6/4/3
+f 1/2/4 4/3/4 8/4/4
+f 8/1/5 4/2/5 3/3/5 7/4/5
+f 7/3/6 3/4/6 2/1/6 5/2/6
+f 2/1/7 1/2/7 8/3/7
+l 7 9
+l 2 9

models/moreblocks_slope_inner_half_raised.obj

@@ -1,86 +1,38 @@
-g top
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_inner_half_raised.mtl
+o Cube_Cube.003
 v 0.500000 0.500000 -0.500000
 v 0.500000 0.500000 0.500000
-v -0.500000 0.500000 0.500000
-v -0.500000 0.000000 -0.500000
-v -0.500000 0.000000 -0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 1.0000 0.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 0.8944 -0.4472
-vn -0.4472 0.8944 0.0000
-s off
-f 3/1/1 2/2/1 4/3/1
-f 2/2/2 1/4/2 5/5/2
-g bottom
 v 0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 8/6/3 9/7/3 7/8/3 6/9/3
-l 10 8
-g right
 v -0.500000 0.500000 0.500000
 v -0.500000 0.000000 -0.500000
 v -0.500000 -0.500000 0.500000
 v -0.500000 0.000000 -0.500000
 v -0.500000 -0.500000 -0.500000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vn -1.0000 0.0000 0.0000
-s off
-f 13/10/4 11/11/4 12/12/4 15/13/4
-g left
-v 0.500000 0.500000 -0.500000
-v 0.500000 0.500000 0.500000
 v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 1.0000 0.0000 0.0000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 1.000000 0.500000
+vt 0.000000 0.500000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 0.894400 -0.447200
+vn 0.000000 -0.000000 1.000000
+vn -0.447200 0.894400 0.000000
+vn 0.000000 -1.000000 -0.000000
+vn 0.000000 0.000000 -1.000000
+vn -1.000000 0.000000 0.000000
+usemtl None.003
 s off
-f 16/14/5 17/15/5 18/16/5 19/17/5
-l 20 17
-g back
-v 0.500000 0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-v -0.500000 0.500000 0.500000
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vn 0.0000 -0.0000 1.0000
-s off
-f 24/18/6 22/19/6 21/20/6 23/21/6
-l 25 21
-l 25 24
-g front
-v 0.500000 0.500000 -0.500000
-v 0.500000 -0.500000 -0.500000
-v -0.500000 0.000000 -0.500000
-v -0.500000 0.000000 -0.500000
-v -0.500000 -0.500000 -0.500000
-vt 1.0000 0.5000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn -0.0000 0.0000 -1.0000
-s off
-f 28/22/7 26/23/7 27/24/7 30/25/7
-l 29 26
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 5/1/2 2/2/2 6/4/2
+f 7/3/3 3/4/3 2/1/3 5/2/3
+f 2/2/4 1/3/4 8/4/4
+f 7/1/5 9/2/5 4/3/5 3/4/5
+f 6/5/6 1/2/6 4/3/6 9/4/6
+f 7/4/7 5/1/7 6/6/7 9/3/7
+l 2 10
+l 7 10

models/moreblocks_slope_outer.obj

@@ -1,48 +1,25 @@
-g top
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 -0.500000
-v 0.500000 0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn -0.7071 0.7071 0.0000
-vn 0.0000 0.7071 -0.7071
-s off
-f 4/1/1 2/2/1 1/3/1
-f 4/4/2 3/5/2 2/6/2
-g bottom
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_outer.mtl
+o Cube_Cube.004
 v 0.500000 -0.500000 0.500000
 v -0.500000 -0.500000 0.500000
 v -0.500000 -0.500000 -0.500000
 v 0.500000 -0.500000 -0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 5/7/3 6/8/3 7/9/3 8/10/3
-g right
-v 0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 0.500000
 v 0.500000 0.500000 0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vn 0.0000 -0.0000 1.0000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vn 0.000000 -1.000000 -0.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 -0.000000 1.000000
+vn -0.707100 0.707100 0.000000
+vn 0.000000 0.707100 -0.707100
+usemtl None
 s off
-f 10/11/4 9/12/4 11/13/4
-g left
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v 0.500000 0.500000 0.500000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 1.0000 0.0000 0.0000
-s off
-f 14/14/5 12/15/5 13/16/5
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 5/2/2 1/3/2 4/4/2
+f 2/3/3 1/4/3 5/1/3
+f 5/1/4 3/3/4 2/4/4
+f 5/2/5 4/3/5 3/4/5

models/moreblocks_slope_outer_cut.obj

@@ -1,40 +1,23 @@
-g top
-v 0.500000 0.500000 0.500000
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-vt 1.0000 0.0000
-vt 0.5000 1.0000
-vt 0.0000 0.0000
-vn -0.5774 0.5774 -0.5774
-s off
-f 2/1/1 1/2/1 3/3/1
-g bottom
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 0.0000 1.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 5/4/2 4/5/2 6/6/2
-g right
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_outer_cut.mtl
+o Cube.002
 v 0.500000 0.500000 0.500000
 v -0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -0.0000 1.0000
-s off
-f 7/7/3 8/8/3 9/9/3
-g left
-v 0.500000 0.500000 0.500000
-v 0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 -0.500000
-vt 1.0000 0.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vn 1.0000 0.0000 0.0000
+vt 1.000000 1.000000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 0.000000 1.000000
+vt 0.500000 1.000000
+vn 0.000000 -0.000000 1.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 -1.000000 0.000000
+vn -0.577400 0.577400 -0.577400
+usemtl None.004
 s off
-f 12/10/4 10/11/4 11/12/4
+f 1/1/1 2/2/1 3/3/1
+f 4/3/2 1/4/2 3/2/2
+f 3/2/3 2/3/3 4/4/3
+f 2/3/4 1/5/4 4/2/4

models/moreblocks_slope_outer_cut_half.obj

@@ -1,40 +1,24 @@
-g top
-v 0.500000 -0.000000 0.500000
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-vt 1.0000 0.0000
-vt 0.5000 1.0000
-vt 0.0000 0.0000
-vn -0.4082 0.8165 -0.4082
-s off
-f 2/1/1 1/2/1 3/3/1
-g bottom
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 0.0000 1.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 5/4/2 4/5/2 6/6/2
-g right
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_outer_cut_half.mtl
+o Cube.003
 v 0.500000 -0.000000 0.500000
 v -0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 0.500000
-vt 1.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -0.0000 1.0000
-s off
-f 7/7/3 8/8/3 9/9/3
-g left
-v 0.500000 -0.000000 0.500000
-v 0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 -0.500000
-vt 1.0000 0.0000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vn 1.0000 0.0000 0.0000
+vt 1.000000 0.500000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 0.000000 0.500000
+vt 0.000000 1.000000
+vt 0.500000 1.000000
+vn 0.000000 -0.000000 1.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 -1.000000 0.000000
+vn -0.408200 0.816500 -0.408200
+usemtl None.005
 s off
-f 12/10/4 10/11/4 11/12/4
+f 1/1/1 2/2/1 3/3/1
+f 4/3/2 1/4/2 3/2/2
+f 3/2/3 2/3/3 4/5/3
+f 2/3/4 1/6/4 4/2/4

models/moreblocks_slope_outer_cut_half_raised.obj

@@ -1,56 +1,28 @@
-g top
-v -0.500000 -0.000000 0.500000
-v 0.500000 0.500000 0.500000
-v 0.500000 0.000000 -0.500000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vn -0.4082 0.8165 -0.4082
-s off
-f 1/1/1 2/2/1 3/3/1
-g bottom
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-vt 0.0000 1.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 4/4/2 6/5/2 5/6/2
-g right
-v -0.500000 -0.000000 0.500000
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v 0.500000 0.000000 -0.500000
-vt 1.0000 0.0000
-vt 1.0000 0.5000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vn -0.7071 0.0000 -0.7071
-s off
-f 8/7/3 7/8/3 10/9/3 9/10/3
-g left
-v 0.500000 -0.500000 0.500000
-v 0.500000 0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v 0.500000 0.000000 -0.500000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 0.5000
-vn 1.0000 0.0000 0.0000
-s off
-f 12/11/4 11/12/4 13/13/4 14/14/4
-g back
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_outer_cut_half_raised.mtl
+o Cube_Cube.005
 v -0.500000 -0.000000 0.500000
 v -0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 0.500000
 v 0.500000 0.500000 0.500000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vn -0.0000 -0.0000 1.0000
+v 0.500000 -0.500000 -0.500000
+v 0.500000 0.000000 -0.500000
+vt 0.000000 0.500000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 1.000000 0.500000
+vn 0.000000 -0.000000 1.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 -1.000000 0.000000
+vn -0.408200 0.816500 -0.408200
+vn -0.707100 0.000000 -0.707100
+usemtl None.006
 s off
-f 15/15/5 16/16/5 17/17/5 18/18/5
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 4/5/2 3/2/2 5/3/2 6/6/2
+f 2/5/3 5/3/3 3/4/3
+f 1/2/4 4/3/4 6/4/4
+f 2/3/5 1/6/5 6/1/5 5/2/5

models/moreblocks_slope_outer_half.obj

@@ -1,48 +1,27 @@
-g top
-v -0.500000 -0.500000 0.500000
-v -0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 -0.500000
-v 0.500000 -0.000000 0.500000
-vt 1.0000 0.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vt 0.0000 0.0000
-vn 0.0000 0.8944 -0.4472
-vn -0.4472 0.8944 0.0000
-s off
-f 2/1/1 4/2/1 3/3/1
-f 1/4/2 4/5/2 2/6/2
-g bottom
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_outer_half.mtl
+o Cube.004
 v -0.500000 -0.500000 0.500000
 v -0.500000 -0.500000 -0.500000
 v 0.500000 -0.500000 -0.500000
 v 0.500000 -0.500000 0.500000
-vt 1.0000 1.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 5/7/3 6/8/3 7/9/3 8/10/3
-g right
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 0.500000
 v 0.500000 -0.000000 0.500000
-vt 1.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn 0.0000 -0.0000 1.0000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 1.000000 0.500000
+vt 0.000000 0.500000
+vn 0.000000 -1.000000 -0.000000
+vn 0.000000 -0.000000 1.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 0.894400 -0.447200
+vn -0.447200 0.894400 0.000000
+usemtl None.007
 s off
-f 11/11/4 9/12/4 10/13/4
-g left
-v 0.500000 -0.500000 -0.500000
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.000000 0.500000
-vt 1.0000 0.0000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vn 1.0000 0.0000 0.0000
-s off
-f 12/14/5 14/15/5 13/16/5
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 5/5/2 1/3/2 4/4/2
+f 3/4/3 5/6/3 4/3/3
+f 2/4/4 5/2/4 3/3/4
+f 1/4/5 5/1/5 2/3/5

models/moreblocks_slope_outer_half_raised.obj

@@ -1,74 +1,34 @@
-g top
-v -0.500000 -0.000000 0.500000
-v 0.500000 0.500000 0.500000
-v 0.500000 0.000000 -0.500000
-v -0.500000 0.000000 -0.500000
-vt 1.0000 0.0000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 1.0000
-vn 0.0000 0.8944 -0.4472
-vn -0.4472 0.8944 0.0000
-s off
-f 4/1/1 2/2/1 3/3/1
-f 4/1/2 1/4/2 2/2/2
-g bottom
-v -0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v -0.500000 -0.500000 -0.500000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vn 0.0000 -1.0000 -0.0000
-s off
-f 7/5/3 6/6/3 5/7/3 8/8/3
-g right
-v -0.500000 -0.000000 0.500000
-v -0.500000 -0.500000 0.500000
-v -0.500000 0.000000 -0.500000
-v -0.500000 -0.500000 -0.500000
-vt 1.0000 0.5000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vn -1.0000 0.0000 0.0000
-s off
-f 9/9/4 11/10/4 12/11/4 10/12/4
-g left
-v 0.500000 -0.500000 0.500000
-v 0.500000 0.500000 0.500000
-v 0.500000 -0.500000 -0.500000
-v 0.500000 0.000000 -0.500000
-vt 0.0000 1.0000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 0.5000
-vn 1.0000 0.0000 0.0000
-s off
-f 14/13/5 13/14/5 15/15/5 16/16/5
-g back
+# Blender v2.72 (sub 0) OBJ File: ''
+# www.blender.org
+mtllib moreblocks_slope_outer_half_raised.mtl
+o Cube_Cube.006
 v -0.500000 -0.000000 0.500000
 v -0.500000 -0.500000 0.500000
 v 0.500000 -0.500000 0.500000
 v 0.500000 0.500000 0.500000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 1.0000
-vn -0.0000 -0.0000 1.0000
-s off
-f 17/17/6 18/18/6 19/19/6 20/20/6
-g front
 v 0.500000 -0.500000 -0.500000
 v 0.500000 0.000000 -0.500000
 v -0.500000 0.000000 -0.500000
 v -0.500000 -0.500000 -0.500000
-vt 0.0000 0.5000
-vt 0.0000 0.0000
-vt 1.0000 0.0000
-vt 1.0000 0.5000
-vn 0.0000 0.0000 -1.0000
+vt 0.000000 0.500000
+vt 0.000000 0.000000
+vt 1.000000 0.000000
+vt 1.000000 1.000000
+vt 0.000000 1.000000
+vt 1.000000 0.500000
+vn 0.000000 -0.000000 1.000000
+vn 1.000000 0.000000 0.000000
+vn 0.000000 0.894400 -0.447200
+vn -1.000000 0.000000 0.000000
+vn -0.447200 0.894400 0.000000
+vn 0.000000 0.000000 -1.000000
+vn 0.000000 -1.000000 -0.000000
+usemtl None.008
 s off
-f 22/21/7 21/22/7 24/23/7 23/24/7
+f 1/1/1 2/2/1 3/3/1 4/4/1
+f 4/5/2 3/2/2 5/3/2 6/6/2
+f 7/3/3 4/5/3 6/2/3
+f 1/6/4 7/1/4 8/2/4 2/3/4
+f 7/3/5 1/4/5 4/5/5
+f 6/1/6 5/2/6 8/3/6 7/6/6
+f 5/5/7 3/2/7 2/3/7 8/4/7

nodes.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: node definitions
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -12,10 +12,6 @@ local sound_stone = default.node_sound_stone_defaults()
 local sound_glass = default.node_sound_glass_defaults()
 local sound_leaves = default.node_sound_leaves_defaults()
 
--- Don't break on 0.4.14 and earlier.
-local sound_metal = (default.node_sound_metal_defaults
-		and default.node_sound_metal_defaults() or sound_stone)
-
 local function tile_tiles(name)
 	local tex = "moreblocks_" ..name.. ".png"
 	return {tex, tex, tex, tex, tex.. "^[transformR90", tex.. "^[transformR90"}
@@ -35,7 +31,7 @@ local nodes = {
 	},
 	["wood_tile_flipped"] = {
 		description = S("Wooden Tile"),
-		groups = {wood = 1, snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
+		groups = {snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
 		tiles = {"default_wood.png^moreblocks_wood_tile.png^[transformR90",
 		"default_wood.png^moreblocks_wood_tile.png^[transformR90",
 		"default_wood.png^moreblocks_wood_tile.png^[transformR90",
@@ -47,40 +43,40 @@ local nodes = {
 	},
 	["wood_tile_center"] = {
 		description = S("Centered Wooden Tile"),
-		groups = {wood = 1, snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
+		groups = {snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
 		tiles = {"default_wood.png^moreblocks_wood_tile_center.png"},
 		sounds = sound_wood,
 	},
 	["wood_tile_full"] = {
 		description = S("Full Wooden Tile"),
-		groups = {wood = 1, snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
+		groups = {snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
 		tiles = tile_tiles("wood_tile_full"),
 		sounds = sound_wood,
 	},
 	["wood_tile_up"] = {
 		description = S("Upwards Wooden Tile"),
-		groups = {wood = 1, snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
+		groups = {snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
 		tiles = {"default_wood.png^moreblocks_wood_tile_up.png"},
 		sounds = sound_wood,
 		no_stairs = true,
 	},
 	["wood_tile_down"] = {
 		description = S("Downwards Wooden Tile"),
-		groups = {wood = 1, snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
+		groups = {snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
 		tiles = {"default_wood.png^[transformR180^moreblocks_wood_tile_up.png^[transformR180"},
 		sounds = sound_wood,
 		no_stairs = true,
 	},
 	["wood_tile_left"] = {
 		description = S("Leftwards Wooden Tile"),
-		groups = {wood = 1, snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
+		groups = {snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
 		tiles = {"default_wood.png^[transformR270^moreblocks_wood_tile_up.png^[transformR270"},
 		sounds = sound_wood,
 		no_stairs = true,
 	},
 	["wood_tile_right"] = {
 		description = S("Rightwards Wooden Tile"),
-		groups = {wood = 1, snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
+		groups = {snappy = 1, choppy = 2, oddly_breakable_by_hand = 2, flammable = 3},
 		tiles = {"default_wood.png^[transformR90^moreblocks_wood_tile_up.png^[transformR90"},
 		sounds = sound_wood,
 		no_stairs = true,
@@ -141,8 +137,7 @@ local nodes = {
 	["iron_glass"] = {
 		description = S("Iron Glass"),
 		drawtype = "glasslike_framed_optional",
-		--tiles = {"moreblocks_iron_glass.png", "moreblocks_iron_glass_detail.png"},
-		tiles = {"moreblocks_iron_glass.png"},
+		tiles = {"moreblocks_iron_glass.png", "moreblocks_iron_glass_detail.png"}, --MFF connected glass
 		paramtype = "light",
 		sunlight_propagates = true,
 		groups = {snappy = 2, cracky = 3, oddly_breakable_by_hand = 3},
@@ -151,8 +146,7 @@ local nodes = {
 	["coal_glass"] = {
 		description = S("Coal Glass"),
 		drawtype = "glasslike_framed_optional",
-		--tiles = {"moreblocks_coal_glass.png", "moreblocks_coal_glass_detail.png"},
-		tiles = {"moreblocks_coal_glass.png"},
+		tiles = {"moreblocks_coal_glass.png", "moreblocks_coal_glass_detail.png"}, --MFF connected glass
 		paramtype = "light",
 		sunlight_propagates = true,
 		groups = {snappy = 2, cracky = 3, oddly_breakable_by_hand = 3},
@@ -161,8 +155,7 @@ local nodes = {
 	["clean_glass"] = {
 		description = S("Clean Glass"),
 		drawtype = "glasslike_framed_optional",
-		--tiles = {"moreblocks_clean_glass.png", "moreblocks_clean_glass_detail.png"},
-		tiles = {"moreblocks_clean_glass.png"},
+		tiles = {"moreblocks_clean_glass.png", "moreblocks_clean_glass_detail.png"}, --MFF connected glass
 		paramtype = "light",
 		sunlight_propagates = true,
 		groups = {snappy = 2, cracky = 3, oddly_breakable_by_hand = 3},
@@ -190,7 +183,6 @@ local nodes = {
 			"moreblocks_empty_bookshelf.png"},
 		groups = {snappy = 2, choppy = 3, oddly_breakable_by_hand = 2, flammable = 3},
 		sounds = sound_wood,
-		furnace_burntime = 15,
 		no_stairs = true,
 	},
 	["coal_stone"] = {
@@ -235,8 +227,7 @@ local nodes = {
 	["trap_glass"] = {
 		description = S("Trap Glass"),
 		drawtype = "glasslike_framed_optional",
-		--tiles = {"moreblocks_trap_glass.png", "default_glass_detail.png"},
-		tiles = {"moreblocks_trap_glass.png"},
+		tiles = {"moreblocks_trap_glass.png", "default_glass_detail.png"}, --MFF connected glass
 		paramtype = "light",
 		sunlight_propagates = true,
 		walkable = false,
@@ -258,11 +249,23 @@ local nodes = {
 		sounds = sound_wood,
 		furnace_burntime = 30,
 	},
+	["horizontal_jungle_tree"] = {
+		description = S("Horizontal Jungle Tree"),
+		tiles = {"default_jungletree.png",
+		"default_jungletree.png",
+		"default_jungletree.png^[transformR90",
+		"default_jungletree.png^[transformR90",
+		"default_jungletree_top.png",
+		"default_jungletree_top.png"},
+		paramtype2 = "facedir",
+		groups = {tree=1,snappy=1,choppy=2,oddly_breakable_by_hand=1,flammable=2},
+		sounds = sound_wood,
+		furnace_burntime = 30,
+	},
 	["glow_glass"] = {
 		description = S("Glow Glass"),
 		drawtype = "glasslike_framed_optional",
-		--tiles = {"moreblocks_glow_glass.png", "moreblocks_glow_glass_detail.png"},
-		tiles = {"moreblocks_glow_glass.png"},
+		tiles = {"moreblocks_glow_glass.png", "moreblocks_glow_glass_detail.png"}, --MFF connected glass
 		paramtype = "light",
 		sunlight_propagates = true,
 		light_source = 11,
@@ -272,8 +275,7 @@ local nodes = {
 	["trap_glow_glass"] = {
 		description = S("Trap Glow Glass"),
 		drawtype = "glasslike_framed_optional",
-		--tiles = {"moreblocks_trap_glass.png", "moreblocks_glow_glass_detail.png"},
-		tiles = {"moreblocks_trap_glass.png"},
+		tiles = {"moreblocks_trap_glass.png", "moreblocks_glow_glass_detail.png"}, --MFF connected glass
 		paramtype = "light",
 		sunlight_propagates = true,
 		light_source = 11,
@@ -285,22 +287,20 @@ local nodes = {
 	["super_glow_glass"] = {
 		description = S("Super Glow Glass"),
 		drawtype = "glasslike_framed_optional",
-		--tiles = {"moreblocks_super_glow_glass.png", "moreblocks_super_glow_glass_detail.png"},
-		tiles = {"moreblocks_super_glow_glass.png"},
+		tiles = {"moreblocks_super_glow_glass.png", "moreblocks_super_glow_glass_detail.png"}, --MFF connected glass
 		paramtype = "light",
 		sunlight_propagates = true,
-		light_source = 14,
+		light_source = default.LIGHT_MAX,
 		groups = {snappy = 2, cracky = 3, oddly_breakable_by_hand = 3},
 		sounds = sound_glass,
 	},
 	["trap_super_glow_glass"] = {
 		description = S("Trap Super Glow Glass"),
 		drawtype = "glasslike_framed_optional",
-		--tiles = {"moreblocks_trap_super_glow_glass.png", "moreblocks_super_glow_glass_detail.png"},
-		tiles = {"moreblocks_trap_super_glow_glass.png"},
+		tiles = {"moreblocks_trap_super_glow_glass.png", "moreblocks_super_glow_glass_detail.png"}, --MFF connected glass
 		paramtype = "light",
 		sunlight_propagates = true,
-		light_source = 14,
+		light_source = default.LIGHT_MAX,
 		walkable = false,
 		groups = {snappy = 2, cracky = 3, oddly_breakable_by_hand = 3},
 		sounds = sound_glass,
@@ -321,11 +321,6 @@ local nodes = {
 		sounds = sound_leaves,
 		no_stairs = true,
 	},
-	["copperpatina"] = {
-		description = S("Copper Patina Block"),
-		groups = {cracky = 1, level = 2},
-		sounds = sound_metal,
-	},
 }
 
 for name, def in pairs(nodes) do
@@ -358,3 +353,4 @@ minetest.register_craftitem("moreblocks:nothing", {
 	inventory_image = "invisible.png",
 	on_use = function() end,
 })
+

ownership.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: ownership handling
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 

redefinitions.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: redefinitions of default stuff
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -10,9 +10,9 @@ Licensed under the zlib license. See LICENSE.md for more information.
 minetest.register_craft({
 	output = "default:sign_wall 4",
 	recipe = {
-		{"default:wood", "default:wood", "default:wood"},
-		{"default:wood", "default:wood", "default:wood"},
-		{"", "default:stick", ""},
+		{"group:wood", "group:wood", "group:wood"},
+		{"group:wood", "group:wood", "group:wood"},
+		{"", "group:stick", ""},
 	}
 })
 
@@ -32,16 +32,69 @@ minetest.register_craft({
 	}
 })
 
-minetest.register_craft({
-	output = "default:rail 24",
+--[[minetest.register_craft({
+	output = "default:rail 16", -- /MFF (Mg|06/10/15) => (Ombridride|26/07/15)
 	recipe = {
 		{"default:steel_ingot", "", "default:steel_ingot"},
 		{"default:steel_ingot", "default:stick", "default:steel_ingot"},
 		{"default:steel_ingot", "", "default:steel_ingot"},
 	}
-})
+})--]]
 
 minetest.register_craft({
 	type = "toolrepair",
 	additional_wear = -0.10, -- Tool repair buff (10% bonus instead of 2%).
 })
+
+-- Redefinitions of some default nodes
+-- ===================================
+
+-- Let there be light. This makes some nodes let light pass through:
+minetest.override_item("default:ladder", {
+	paramtype = "light",
+	sunlight_propagates = true,
+})
+
+minetest.override_item("default:sapling", {
+	paramtype = "light",
+	sunlight_propagates = true,
+})
+
+minetest.override_item("default:dry_shrub", {
+	paramtype = "light",
+	sunlight_propagates = true,
+})
+
+minetest.override_item("default:papyrus", {
+	paramtype = "light",
+	sunlight_propagates = true,
+})
+
+minetest.override_item("default:fence_wood", {
+	paramtype = "light",
+	sunlight_propagates = true,
+})
+
+minetest.override_item("default:junglegrass", {
+	paramtype = "light",
+	sunlight_propagates = true,
+})
+
+minetest.override_item("default:junglesapling", {
+	paramtype = "light",
+	sunlight_propagates = true,
+})
+
+minetest.override_item("default:grass_1", {
+	inventory_image = "default_grass_3.png", -- Use a bigger inventory image.
+	wield_image = "default_grass_3.png",
+	paramtype = "light",
+	sunlight_propagates = true,
+})
+
+for i = 2, 5 do
+	minetest.override_item("default:grass_" ..i, {
+		paramtype = "light",
+		sunlight_propagates = true,
+	})
+end

stairsplus/API.md

@@ -1,4 +1,5 @@
-# API documentation for Stairs+
+API documentation for Stairs+
+=============================
 
 * `stairsplus:register_all(modname, subname, recipeitem, fields)`
 	Registers a stair, slab, panel, microblock, and any other types of

stairsplus/aliases.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: alias definitions
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 

stairsplus/conversion.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: conversion
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -80,7 +80,6 @@ function stairsplus:register_6dfacedir_conversion(modname, material)
 			chance = 1,
 			action = function(pos, node, active_object_count, active_object_count_wider)
 				local fdir = node.param2 or 0
-				local nfdir
 
 				if flip_upside_down and not flip_to_wall then
 					nfdir = dirs1[fdir + 2]
@@ -137,3 +136,4 @@ function stairsplus:register_6dfacedir_conversion(modname, material)
 		})
 	end
 end
+

stairsplus/init.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: Stairs+
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -12,28 +12,11 @@ local modpath = minetest.get_modpath("moreblocks").. "/stairsplus"
 stairsplus = {}
 stairsplus.expect_infinite_stacks = false
 
-stairsplus.shapes_list = {}
-
 if not minetest.get_modpath("unified_inventory")
-and minetest.settings:get_bool("creative_mode") then
+and minetest.setting_getbool("creative_mode") then
 	stairsplus.expect_infinite_stacks = true
 end
 
-function stairsplus.copytable(orig)
-	local orig_type = type(orig)
-	local copy
-	if orig_type == 'table' then
-		copy = {}
-		for orig_key, orig_value in next, orig, nil do
-			copy[stairsplus.copytable(orig_key)] = stairsplus.copytable(orig_value)
-		end
-		setmetatable(copy, stairsplus.copytable(getmetatable(orig)))
-	else
-		copy = orig
-	end
-	return copy
-end
-
 function stairsplus:prepare_groups(groups)
 	local result = {}
 	if groups then
@@ -58,21 +41,6 @@ function stairsplus:register_all(modname, subname, recipeitem, fields)
 	-- self:register_6dfacedir_conversion(modname, subname) -- Not needed as of Q3 2013, uncomment to fix old maps.
 end
 
-function stairsplus:register_alias_all(modname_old, subname_old, modname_new, subname_new)
-	self:register_stair_alias(modname_old, subname_old, modname_new, subname_new)
-	self:register_slab_alias(modname_old, subname_old, modname_new, subname_new)
-	self:register_slope_alias(modname_old, subname_old, modname_new, subname_new)
-	self:register_panel_alias(modname_old, subname_old, modname_new, subname_new)
-	self:register_micro_alias(modname_old, subname_old, modname_new, subname_new)
-end
-function stairsplus:register_alias_force_all(modname_old, subname_old, modname_new, subname_new)
-	self:register_stair_alias_force(modname_old, subname_old, modname_new, subname_new)
-	self:register_slab_alias_force(modname_old, subname_old, modname_new, subname_new)
-	self:register_slope_alias_force(modname_old, subname_old, modname_new, subname_new)
-	self:register_panel_alias_force(modname_old, subname_old, modname_new, subname_new)
-	self:register_micro_alias_force(modname_old, subname_old, modname_new, subname_new)
-end
-
 function register_stair_slab_panel_micro(modname, subname, recipeitem, groups, images, description, drop, light)
 	stairsplus:register_all(modname, subname, recipeitem, {
 		groups = groups,

stairsplus/microblocks.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: microblock definitions
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -20,7 +20,8 @@ function register_micro(modname, subname, recipeitem, groups, images, descriptio
 	})
 end
 
-local microblocks_defs = {
+function stairsplus:register_micro(modname, subname, recipeitem, fields)
+	local defs = {
 		[""] = {
 			node_box = {
 				type = "fixed",
@@ -33,74 +34,44 @@ local microblocks_defs = {
 				fixed = {-0.5, -0.5, 0, 0, -0.4375, 0.5},
 			},
 		},
-	["_2"] = {
-		node_box = {
-			type = "fixed",
-			fixed = {-0.5, -0.5, 0, 0, -0.375, 0.5},
-		},
-	},
-	["_4"] = {
-		node_box = {
-			type = "fixed",
-			fixed = {-0.5, -0.5, 0, 0, -0.25, 0.5},
-		},
-	},
+		["_2"] = {legacy = "_1"},
+		["_4"] = {legacy = ""},
 		["_12"] = {
 			node_box = {
 				type = "fixed",
 				fixed = {-0.5, -0.5, 0, 0, 0.25, 0.5},
 			},
 		},
-	["_14"] = {
-		node_box = {
-			type = "fixed",
-			fixed = {-0.5, -0.5, 0, 0, 0.375, 0.5},
-		},
-	},
+		["_14"] = {legacy = "_15"},
 		["_15"] = {
 			node_box = {
 				type = "fixed",
 				fixed = {-0.5, -0.5, 0, 0, 0.4375, 0.5},
 			},
 		}
-}
+	}
 
-for k,v in pairs(microblocks_defs) do
-	table.insert(stairsplus.shapes_list, { "micro_", k })
-end
-
-function stairsplus:register_micro_alias(modname_old, subname_old, modname_new, subname_new)
-	local defs = stairsplus.copytable(microblocks_defs)
-	for alternate, def in pairs(defs) do
-		minetest.register_alias(modname_old .. ":micro_" .. subname_old .. alternate, modname_new .. ":micro_" .. subname_new .. alternate)
-	end
-end
-
-function stairsplus:register_micro_alias_force(modname_old, subname_old, modname_new, subname_new)
-	local defs = stairsplus.copytable(microblocks_defs)
-	for alternate, def in pairs(defs) do
-		minetest.register_alias_force(modname_old .. ":micro_" .. subname_old .. alternate, modname_new .. ":micro_" .. subname_new .. alternate)
-	end
-end
-
-function stairsplus:register_micro(modname, subname, recipeitem, fields)
-	local defs = stairsplus.copytable(microblocks_defs)
 	local desc = S("%s Microblock"):format(fields.description)
 	for alternate, def in pairs(defs) do
+		if def.legacy then
+			minetest.register_alias(modname .. ":micro_" .. subname .. alternate,
+				modname .. ":micro_" .. subname .. def.legacy)
+		else
 			for k, v in pairs(fields) do
 				def[k] = v
 			end
 			def.drawtype = "nodebox"
 			def.paramtype = "light"
-		def.paramtype2 = def.paramtype2 or "facedir"
+			def.paramtype2 = "facedir"
 			def.on_place = minetest.rotate_node
 			def.groups = stairsplus:prepare_groups(fields.groups)
 			def.description = desc
-		if fields.drop and not (type(fields.drop) == "table") then
+			if fields.drop then
 				def.drop = modname.. ":micro_" ..fields.drop..alternate
 			end
 			minetest.register_node(":" ..modname.. ":micro_" ..subname..alternate, def)
 		end
+	end
 	minetest.register_alias(modname.. ":micro_" ..subname.. "_bottom", modname.. ":micro_" ..subname)
 
 	circular_saw.known_nodes[recipeitem] = {modname, subname}

stairsplus/panels.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: panel definitions
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -20,7 +20,8 @@ function register_panel(modname, subname, recipeitem, groups, images, descriptio
 	})
 end
 
-local panels_defs = {
+function stairsplus:register_panel(modname, subname, recipeitem, fields)
+	local defs = {
 		[""] = {
 			node_box = {
 				type = "fixed",
@@ -33,74 +34,44 @@ local panels_defs = {
 				fixed = {-0.5, -0.5, 0, 0.5, -0.4375, 0.5},
 			},
 		},
-	["_2"] = {
-		node_box = {
-			type = "fixed",
-			fixed = {-0.5, -0.5, 0, 0.5, -0.375, 0.5},
-		},
-	},
-	["_4"] = {
-		node_box = {
-			type = "fixed",
-			fixed = {-0.5, -0.5, 0, 0.5, -0.25, 0.5},
-		},
-	},
+		["_2"] = {legacy = "_1"},
+		["_4"] = {legacy = ""},
 		["_12"] = {
 			node_box = {
 				type = "fixed",
 				fixed = {-0.5, -0.5, 0, 0.5, 0.25, 0.5},
 			},
 		},
-	["_14"] = {
-		node_box = {
-			type = "fixed",
-			fixed = {-0.5, -0.5, 0, 0.5, 0.375, 0.5},
-		},
-	},
+		["_14"] = {legacy = "_15"},
 		["_15"] = {
 			node_box = {
 				type = "fixed",
 				fixed = {-0.5, -0.5, 0, 0.5, 0.4375, 0.5},
 			},
 		}
-}
+	}
 
-for k,v in pairs(panels_defs) do
-	table.insert(stairsplus.shapes_list, { "panel_", k })
-end
-
-function stairsplus:register_panel_alias(modname_old, subname_old, modname_new, subname_new)
-	local defs = stairsplus.copytable(panels_defs)
-	for alternate, def in pairs(defs) do
-		minetest.register_alias(modname_old .. ":panel_" .. subname_old .. alternate, modname_new .. ":panel_" .. subname_new .. alternate)
-	end
-end
-
-function stairsplus:register_panel_alias_force(modname_old, subname_old, modname_new, subname_new)
-	local defs = stairsplus.copytable(panels_defs)
-	for alternate, def in pairs(defs) do
-		minetest.register_alias_force(modname_old .. ":panel_" .. subname_old .. alternate, modname_new .. ":panel_" .. subname_new .. alternate)
-	end
-end
-
-function stairsplus:register_panel(modname, subname, recipeitem, fields)
-	local defs = stairsplus.copytable(panels_defs)
 	local desc = S("%s Panel"):format(fields.description)
 	for alternate, def in pairs(defs) do
+		if def.legacy then
+			minetest.register_alias(modname .. ":panel_" .. subname .. alternate,
+				modname .. ":panel_" .. subname .. def.legacy)
+		else
 			for k, v in pairs(fields) do
 				def[k] = v
 			end
 			def.drawtype = "nodebox"
 			def.paramtype = "light"
-		def.paramtype2 = def.paramtype2 or "facedir"
+			def.paramtype2 = "facedir"
 			def.on_place = minetest.rotate_node
 			def.description = desc
 			def.groups = stairsplus:prepare_groups(fields.groups)
-		if fields.drop and not (type(fields.drop) == "table") then
+			if fields.drop then
 				def.drop = modname.. ":panel_" ..fields.drop..alternate
 			end
 			minetest.register_node(":" ..modname.. ":panel_" ..subname..alternate, def)
 		end
+	end
 	minetest.register_alias(modname.. ":panel_" ..subname.. "_bottom", modname.. ":panel_" ..subname)
 
 	circular_saw.known_nodes[recipeitem] = {modname, subname}

stairsplus/registrations.lua

@@ -1,13 +1,12 @@
 --[[
 More Blocks: registrations
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
 local default_nodes = { -- Default stairs/slabs/panels/microblocks:
 	"stone",
-	"stone_block",
 	"cobble",
 	"mossycobble",
 	"brick",
@@ -17,9 +16,7 @@ local default_nodes = { -- Default stairs/slabs/panels/microblocks:
 	"copperblock",
 	"bronzeblock",
 	"diamondblock",
-	"tinblock",
 	"desert_stone",
-	"desert_stone_block",
 	"desert_cobble",
 	"meselamp",
 	"glass",
@@ -29,40 +26,25 @@ local default_nodes = { -- Default stairs/slabs/panels/microblocks:
 	"junglewood",
 	"pine_tree",
 	"pine_wood",
+	"cherry_tree",
+	"cherry_plank",
 	"acacia_tree",
 	"acacia_wood",
-	"aspen_tree",
-	"aspen_wood",
 	"obsidian",
-	"obsidian_block",
-	"obsidianbrick",
 	"obsidian_glass",
 	"stonebrick",
 	"desert_stonebrick",
 	"sandstonebrick",
-	"silver_sandstone",
-	"silver_sandstone_brick",
-	"silver_sandstone_block",
-	"desert_sandstone",
-	"desert_sandstone_brick",
-	"desert_sandstone_block",
-	"sandstone_block",
-	"coral_skeleton",
-	"farming:straw"
+	"obsidianbrick",
 }
 
 for _, name in pairs(default_nodes) do
-	local nodename = "default:"..name
-	local a,b = string.find(name, ":")
-	if b then
-		nodename = name
-		name = string.sub(name, b+1)
-	end
+	local nodename = "default:" .. name
 	local ndef = minetest.registered_nodes[nodename]
 	if ndef then
 		local drop
 		if type(ndef.drop) == "string" then
-			drop = ndef.drop:sub((b or 8)+1)
+			drop = ndef.drop:split(" ")[1]:sub(9)
 		end
 
 		local tiles = ndef.tiles
@@ -81,40 +63,3 @@ for _, name in pairs(default_nodes) do
 		})
 	end
 end
-
--- wool registrations
-
-if minetest.get_modpath("wool") then
-
-	local colorlist = {
-		{"white",      "White Wool"},
-		{"grey",       "Grey Wool"},
-		{"black",      "Black Wool"},
-		{"red",        "Red Wool"},
-		{"yellow",     "Yellow Wool"},
-		{"green",      "Green Wool"},
-		{"cyan",       "Cyan Wool"},
-		{"blue",       "Blue Wool"},
-		{"magenta",    "Magenta Wool"},
-		{"orange",     "Orange Wool"},
-		{"violet",     "Violet Wool"},
-		{"brown",      "Brown Wool"},
-		{"pink",       "Pink Wool"},
-		{"dark_grey",  "Dark Grey Wool"},
-		{"dark_green", "Dark Green Wool"},
-	}
-
-	for i in ipairs(colorlist) do
-		local color = colorlist[i][1]
-		local colordesc = colorlist[i][2]
-		
-		stairsplus:register_all("wool", color, "wool:"..color, {
-			description = colordesc,
-			tiles = {"wool_"..color..".png"},
-			groups = {snappy=2,choppy=2,oddly_breakable_by_hand=3,
-					flammable=3,wool=1,not_in_creative_inventory=1},
-			sounds = default.node_sound_defaults(),
-			sunlight_propagates = true,
-		})
-	end
-end

stairsplus/slabs.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: slab definitions
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -20,87 +20,44 @@ function register_slab(modname, subname, recipeitem, groups, images, description
 	})
 end
 
-local slabs_defs = {
+function stairsplus:register_slab(modname, subname, recipeitem, fields)
+	local defs = {
 		[""] = 8,
 		["_quarter"] = 4,
 		["_three_quarter"] = 12,
 		["_1"] = 1,
-	["_2"] = 2,
-	["_14"] = 14,
+		["_2"] = "_1",
+		["_14"] = "_three_quarter",
 		["_15"] = 15,
-	["_two_sides"] = {
-						{ -0.5, -0.5, -0.5, 0.5, -7/16, 7/16 },
-						{ -0.5, -0.5, 7/16, 0.5, 0.5, 0.5 }
-					},
-	["_three_sides"] = {
-						{ -7/16, -0.5, -0.5, 0.5, -7/16, 7/16 },
-						{ -7/16, -0.5, 7/16, 0.5, 0.5, 0.5 },
-						{ -0.5, -0.5, -0.5, -7/16, 0.5, 0.5 }
-					},
-	["_three_sides_u"] = {
-						{ -0.5, -0.5, -0.5, 0.5, 0.5, -7/16 },
-						{ -0.5, -0.5, -7/16, 0.5, -7/16, 7/16 },
-						{ -0.5, -0.5, 7/16, 0.5, 0.5, 0.5 }
 	}
-}
 
-for k,v in pairs(slabs_defs) do
-	table.insert(stairsplus.shapes_list, { "slab_", k })
-end
-
-function stairsplus:register_slab_alias(modname_old, subname_old, modname_new, subname_new)
-	local defs = stairsplus.copytable(slabs_defs)
-	for alternate, def in pairs(defs) do
-		minetest.register_alias(modname_old .. ":slab_" .. subname_old .. alternate, modname_new .. ":slab_" .. subname_new .. alternate)
-	end
-end
-
-function stairsplus:register_slab_alias_force(modname_old, subname_old, modname_new, subname_new)
-	local defs = stairsplus.copytable(slabs_defs)
-	for alternate, def in pairs(defs) do
-		minetest.register_alias_force(modname_old .. ":slab_" .. subname_old .. alternate, modname_new .. ":slab_" .. subname_new .. alternate)
-	end
-end
-
-function stairsplus:register_slab(modname, subname, recipeitem, fields)
-	local defs = stairsplus.copytable(slabs_defs)
 	local desc_base = S("%s Slab"):format(fields.description)
-	for alternate, shape in pairs(defs) do
-
-		local def = {}
-
-		if type(shape) ~= "table" then
-			def = {
-					node_box = {
-						type = "fixed",
-						fixed = {-0.5, -0.5, -0.5, 0.5, (shape/16)-0.5, 0.5},
-					},
-					description = ("%s (%d/16)"):format(desc_base, shape)
-				}
+	for alternate, num in pairs(defs) do
+		if type(num) == type("moo") then
+			minetest.register_alias(modname .. ":slab_" .. subname .. alternate,
+				modname .. ":slab_" .. subname .. num)
 		else
-			def = {
+			local def = {
 				node_box = {
 					type = "fixed",
-					fixed = shape,
-				},
-				description = desc_base
+					fixed = {-0.5, -0.5, -0.5, 0.5, (num/16)-0.5, 0.5},
+				}
 			}
-		end
-
 			for k, v in pairs(fields) do
 				def[k] = v
 			end
-
 			def.drawtype = "nodebox"
 			def.paramtype = "light"
-		def.paramtype2 = def.paramtype2 or "facedir"
+			def.paramtype2 = "facedir"
 			def.on_place = minetest.rotate_node
+			def.description = ("%s (%d/16)"):format(desc_base, num)
 			def.groups = stairsplus:prepare_groups(fields.groups)
-		if fields.drop and not (type(fields.drop) == "table") then
+			if fields.drop then
 					def.drop = modname.. ":slab_" .. fields.drop .. alternate
 			end
 			minetest.register_node(":" .. modname .. ":slab_" .. subname .. alternate, def)
 		end
+	end
 	minetest.register_alias("stairs:slab_" .. subname, modname .. ":slab_" .. subname)
 
 	circular_saw.known_nodes[recipeitem] = {modname, subname}

stairsplus/slopes.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: slope definitions
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -123,7 +123,8 @@ function register_slope(modname, subname, recipeitem, groups, images, descriptio
 	})
 end
 
-local slopes_defs = {
+function stairsplus:register_slope(modname, subname, recipeitem, fields)
+	local defs = {
 		[""] = {
 			mesh = "moreblocks_slope.obj",
 			collision_box = box_slope,
@@ -141,7 +142,7 @@ local slopes_defs = {
 			selection_box = box_slope_half_raised,
 		},
 
-	--==============================================================
+--==============================================================
 
 		["_inner"] = {
 			mesh = "moreblocks_slope_inner.obj",
@@ -159,7 +160,7 @@ local slopes_defs = {
 			selection_box = box_slope_inner_half_raised,
 		},
 
-	--==============================================================
+--==============================================================
 
 		["_inner_cut"] = {
 			mesh = "moreblocks_slope_inner_cut.obj",
@@ -177,7 +178,7 @@ local slopes_defs = {
 			selection_box = box_slope_inner_half_raised,
 		},
 
-	--==============================================================
+--==============================================================
 
 		["_outer"] = {
 			mesh = "moreblocks_slope_outer.obj",
@@ -195,7 +196,7 @@ local slopes_defs = {
 			selection_box = box_slope_outer_half_raised,
 		},
 
-	--==============================================================
+--==============================================================
 
 		["_outer_cut"] = {
 			mesh = "moreblocks_slope_outer_cut.obj",
@@ -217,28 +218,8 @@ local slopes_defs = {
 			collision_box = box_slope_outer,
 			selection_box = box_slope_outer,
 		},
-}
+	}
 
-for k,v in pairs(slopes_defs) do
-	table.insert(stairsplus.shapes_list, { "slope_", k })
-end
-
-function stairsplus:register_slope_alias(modname_old, subname_old, modname_new, subname_new)
-	local defs = stairsplus.copytable(slopes_defs)
-	for alternate, def in pairs(defs) do
-		minetest.register_alias(modname_old .. ":slope_" .. subname_old .. alternate, modname_new .. ":slope_" .. subname_new .. alternate)
-	end
-end
-
-function stairsplus:register_slope_alias_force(modname_old, subname_old, modname_new, subname_new)
-	local defs = stairsplus.copytable(slopes_defs)
-	for alternate, def in pairs(defs) do
-		minetest.register_alias_force(modname_old .. ":slope_" .. subname_old .. alternate, modname_new .. ":slope_" .. subname_new .. alternate)
-	end
-end
-
-function stairsplus:register_slope(modname, subname, recipeitem, fields)
-	local defs = stairsplus.copytable(slopes_defs)
 	local desc = S("%s Slope"):format(fields.description)
 	for alternate, def in pairs(defs) do
 		for k, v in pairs(fields) do
@@ -246,11 +227,11 @@ function stairsplus:register_slope(modname, subname, recipeitem, fields)
 		end
 		def.drawtype = "mesh"
 		def.paramtype = "light"
-		def.paramtype2 = def.paramtype2 or "facedir"
+		def.paramtype2 = "facedir"
 		def.on_place = minetest.rotate_node
 		def.description = desc
 		def.groups = stairsplus:prepare_groups(fields.groups)
-		if fields.drop and not (type(fields.drop) == "table") then
+		if fields.drop then
 			def.drop = modname.. ":slope_" ..fields.drop..alternate
 		end
 		minetest.register_node(":" ..modname.. ":slope_" ..subname..alternate, def)

stairsplus/stairs.lua

@@ -1,7 +1,7 @@
 --[[
 More Blocks: stair definitions
 
-Copyright (c) 2011-2017 Hugo Locurcio and contributors.
+Copyright (c) 2011-2015 Calinou and contributors.
 Licensed under the zlib license. See LICENSE.md for more information.
 --]]
 
@@ -20,7 +20,8 @@ function register_stair(modname, subname, recipeitem, groups, images, descriptio
 	})
 end
 
-local stairs_defs = {
+function stairsplus:register_stair(modname, subname, recipeitem, fields)
+	local defs = {
 		[""] = {
 			node_box = {
 				type = "fixed",
@@ -85,15 +86,7 @@ local stairs_defs = {
 				},
 			},
 		},
-	["_alt_2"] = {
-		node_box = {
-			type = "fixed",
-			fixed = {
-				{-0.5, -0.125, -0.5, 0.5, 0, 0},
-				{-0.5, 0.375, 0, 0.5, 0.5, 0.5},
-			},
-		},
-	},
+		["_alt_2"] = {legacy = "_alt_1"},
 		["_alt_4"] = {
 			node_box = {
 				type = "fixed",
@@ -103,44 +96,29 @@ local stairs_defs = {
 				},
 			},
 		},
-}
+	}
 
-for k,v in pairs(stairs_defs) do
-	table.insert(stairsplus.shapes_list, { "stair_", k })
-end
-
-function stairsplus:register_stair_alias(modname_old, subname_old, modname_new, subname_new)
-	local defs = stairsplus.copytable(stairs_defs)
-	for alternate, def in pairs(defs) do
-		minetest.register_alias(modname_old .. ":stair_" .. subname_old .. alternate, modname_new .. ":stair_" .. subname_new .. alternate)
-	end
-end
-
-function stairsplus:register_stair_alias_force(modname_old, subname_old, modname_new, subname_new)
-	local defs = stairsplus.copytable(stairs_defs)
-	for alternate, def in pairs(defs) do
-		minetest.register_alias_force(modname_old .. ":stair_" .. subname_old .. alternate, modname_new .. ":stair_" .. subname_new .. alternate)
-	end
-end
-
-function stairsplus:register_stair(modname, subname, recipeitem, fields)
-	local defs = stairsplus.copytable(stairs_defs)
 	local desc = S("%s Stairs"):format(fields.description)
 	for alternate, def in pairs(defs) do
+		if def.legacy then
+			minetest.register_alias(modname .. ":stair_" .. subname .. alternate,
+				modname .. ":stair_" .. subname .. def.legacy)
+		else
 			for k, v in pairs(fields) do
 				def[k] = v
 			end
 			def.drawtype = "nodebox"
 			def.paramtype = "light"
-		def.paramtype2 = def.paramtype2 or "facedir"
+			def.paramtype2 = "facedir"
 			def.on_place = minetest.rotate_node
 			def.description = desc
 			def.groups = stairsplus:prepare_groups(fields.groups)
-		if fields.drop and not (type(fields.drop) == "table") then
+			if fields.drop then
 				def.drop = modname .. ":stair_" .. fields.drop .. alternate
 			end
 			minetest.register_node(":" .. modname .. ":stair_" .. subname .. alternate, def)
 		end
+	end
 	minetest.register_alias("stairs:stair_" .. subname, modname .. ":stair_" .. subname)
 
 	circular_saw.known_nodes[recipeitem] = {modname, subname}
@@ -148,7 +126,7 @@ function stairsplus:register_stair(modname, subname, recipeitem, fields)
 	-- Some saw-less recipes:
 
 	minetest.register_craft({
-		output = modname .. ":stair_" .. subname .. " 8",
+		output = modname .. ":stair_" .. subname .. " 6",
 		recipe = {
 			{recipeitem, "", ""},
 			{recipeitem, recipeitem, ""},
@@ -157,7 +135,7 @@ function stairsplus:register_stair(modname, subname, recipeitem, fields)
 	})
 
 	minetest.register_craft({
-		output = modname .. ":stair_" .. subname .. " 8",
+		output = modname .. ":stair_" .. subname .. " 6",
 		recipe = {
 			{"", "", recipeitem},
 			{"", recipeitem, recipeitem},