LV LED: Replace silver wire with empty spool on craft

Luanti 5.11 showed a lot of flaws in the shading of the CNC models, some
of which were previously obscured. Fix the models so that smooth shading
is applied where appropriate and sharp/flat shading where appropriate.
The modified files have also been run through ExeVirus' CompressObj.

technic/doc/api.md

@@ -160,6 +160,11 @@ Unsorted functions:
 	* If `technic.power_tools[itemstack:get_name()]` is `nil` (or `false`), this
 	  function does nothing, else that value is the maximum charge.
 	* The itemstack metadata is changed to contain the charge.
+* `technic.get_charge(itemstack)`
+	* Returns the charge and max charge of the given itemstack.
+	* If the itemstack is not an RE chargeable item, both return values will be zero.
+* `technic.set_charge(itemstack, charge)`
+	* Modifies the charge of the given itemstack.
 
 ### Node-specific
 * `technic.get_or_load_node(pos)`

technic/machines/LV/grinder.lua

@@ -9,5 +9,25 @@ minetest.register_craft({
 	}
 })
 
+if (minetest.get_modpath('everness')) then
+	minetest.register_craft({
+		output = 'technic:lv_grinder',
+		recipe = {
+			{'everness:coral_desert_stone', 'default:diamond',        'everness:coral_desert_stone'},
+			{'everness:coral_desert_stone', 'technic:machine_casing', 'everness:coral_desert_stone'},
+			{'technic:granite',             'technic:lv_cable',       'technic:granite'},
+		}
+	})
+
+	minetest.register_craft({
+		output = 'technic:lv_grinder',
+		recipe = {
+			{'everness:forsaken_desert_stone', 'default:diamond',        'everness:forsaken_desert_stone'},
+			{'everness:forsaken_desert_stone', 'technic:machine_casing', 'everness:forsaken_desert_stone'},
+			{'technic:granite',                'technic:lv_cable',       'technic:granite'},
+		}
+	})
+end
+
 technic.register_grinder({tier="LV", demand={200}, speed=1})
 

technic/machines/LV/led.lua

@@ -90,6 +90,7 @@ minetest.register_craft({
 	recipe = {
 		{"", "homedecor:plastic_sheeting", ""},
 		{"homedecor:plastic_sheeting", "technic:doped_silicon_wafer", "homedecor:plastic_sheeting"},
-		{"", "technic:fine_silver_wire", ""},
+		{"", "basic_materials:silver_wire", ""},
-	}
+	},
+	replacements = { {"basic_materials:silver_wire", "basic_materials:empty_spool"}, },
 })

technic/machines/other/frames.lua

@@ -324,6 +324,7 @@ for zp = 0, 1 do
 
 		on_rightclick = function(pos, node, placer, itemstack, pointed_thing)
 			if is_supported_node(itemstack:get_name()) then
+				-- Stripped down version of "core.item_place_node"
 				if minetest.is_protected(pos, placer:get_player_name()) then
 					minetest.log("action", placer:get_player_name()
 						.. " tried to place " .. itemstack:get_name()
@@ -347,8 +348,7 @@ for zp = 0, 1 do
 				end
 
 				-- Run script hook
-				local callback = nil
+				for _, callback in ipairs(minetest.registered_on_placenodes) do
-				for _, _ in ipairs(minetest.registered_on_placenodes) do
 					-- Copy pos and node because callback can modify them
 					local pos_copy = { x = pos.x, y = pos.y, z = pos.z }
 					local newnode_copy = { name = def.name, param1 = 0, param2 = 0 }

technic/machines/register/battery_box.lua

@@ -92,7 +92,7 @@ local dirtab = {
 
 local tube = {
 	insert_object = function(pos, node, stack, direction)
-		print(minetest.pos_to_string(direction), dirtab[direction.x+2+(direction.z+2)*2], node.param2)
+		--print(minetest.pos_to_string(direction), dirtab[direction.x+2+(direction.z+2)*2], node.param2)
 		if direction.y == 1
 			or (direction.y == 0 and dirtab[direction.x+2+(direction.z+2)*2] == node.param2) then
 			return stack
@@ -106,7 +106,7 @@ local tube = {
 		end
 	end,
 	can_insert = function(pos, node, stack, direction)
-		print(minetest.pos_to_string(direction), dirtab[direction.x+2+(direction.z+2)*2], node.param2)
+		--print(minetest.pos_to_string(direction), dirtab[direction.x+2+(direction.z+2)*2], node.param2)
 		if direction.y == 1
 			or (direction.y == 0 and dirtab[direction.x+2+(direction.z+2)*2] == node.param2) then
 			return false
@@ -409,7 +409,7 @@ minetest.register_on_player_receive_fields(
 	end
 )
 
-local function default_get_charge(itemstack)
+function technic.get_charge(itemstack)
 	-- check if is chargable
 	local tool_name = itemstack:get_name()
 	if not technic.power_tools[tool_name] then
@@ -419,7 +419,7 @@ local function default_get_charge(itemstack)
 	return item_meta:get_int("technic:charge"), technic.power_tools[tool_name]
 end
 
-local function default_set_charge(itemstack, charge)
+function technic.set_charge(itemstack, charge)
 	local tool_name = itemstack:get_name()
 	if technic.power_tools[tool_name] then
 		technic.set_RE_wear(itemstack, charge, technic.power_tools[tool_name])
@@ -437,8 +437,8 @@ function technic.charge_tools(meta, batt_charge, charge_step)
 
 	-- get callbacks
 	local src_def = src_stack:get_definition()
-	local technic_get_charge = src_def.technic_get_charge or default_get_charge
+	local technic_get_charge = src_def.technic_get_charge or technic.get_charge
-	local technic_set_charge = src_def.technic_set_charge or default_set_charge
+	local technic_set_charge = src_def.technic_set_charge or technic.set_charge
 
 	-- get tool charge
 	local tool_charge, item_max_charge = technic_get_charge(src_stack)
@@ -471,8 +471,8 @@ function technic.discharge_tools(meta, batt_charge, charge_step, max_charge)
 
 	-- get callbacks
 	local src_def = src_stack:get_definition()
-	local technic_get_charge = src_def.technic_get_charge or default_get_charge
+	local technic_get_charge = src_def.technic_get_charge or technic.get_charge
-	local technic_set_charge = src_def.technic_set_charge or default_set_charge
+	local technic_set_charge = src_def.technic_set_charge or technic.set_charge
 
 	-- get tool charge
 	local tool_charge, item_max_charge = technic_get_charge(src_stack)

technic/machines/register/cables.lua

@@ -43,17 +43,41 @@ local function check_connections(pos)
 	return connections
 end
 
-local function clear_networks(pos)
+local clear_networks
+
+local function clear_network(network_id)
+	if not network_id then
+		return
+	end
+
+	for _,v in pairs(technic.networks[network_id].all_nodes) do
+		local pos1 = minetest.hash_node_position(v)
+		technic.cables[pos1] = nil
+	end
+	local network_bckup = technic.networks[network_id]
+	technic.networks[network_id] = nil
+
+	for _,n_pos in pairs(network_bckup.PR_nodes) do
+		clear_networks(n_pos)
+	end
+	for _,n_pos in pairs(network_bckup.RE_nodes) do
+		clear_networks(n_pos)
+	end
+	for _,n_pos in pairs(network_bckup.BA_nodes) do
+		clear_networks(n_pos)
+	end
+end
+
+clear_networks = function(pos)
 	local node = minetest.get_node(pos)
 	local meta = minetest.get_meta(pos)
 	local placed = node.name ~= "air"
 	local positions = check_connections(pos)
+
 	if #positions < 1 then return end
-	local dead_end = #positions == 1
+
-	for _,connected_pos in pairs(positions) do
+	if #positions == 1 then
-		local net = technic.cables[minetest.hash_node_position(connected_pos)]
+		if placed then
-		if net and technic.networks[net] then
-			if dead_end and placed then
 			-- Dead end placed, add it to the network
 			-- Get the network
 			local network_id = technic.cables[minetest.hash_node_position(positions[1])]
@@ -61,22 +85,19 @@ local function clear_networks(pos)
 				-- We're evidently not on a network, nothing to add ourselves to
 				return
 			end
-				local sw_pos = minetest.get_position_from_hash(network_id)
-				sw_pos.y = sw_pos.y + 1
 			local network = technic.networks[network_id]
 			local tier = network.tier
 
 			-- Actually add it to the (cached) network
 			-- !! IMPORTANT: ../switching_station.lua -> check_node_subp() must be kept in sync
-				technic.cables[minetest.hash_node_position(pos)] = network_id
-				pos.visited = 1
 			if technic.is_tier_cable(node.name, tier) then
-					-- Found a cable
+				technic.cables[minetest.hash_node_position(pos)] = network_id
 				table.insert(network.all_nodes,pos)
 			elseif technic.machines[tier][node.name] then
 				-- Found a machine
 				local eu_type = technic.machines[tier][node.name]
 				meta:set_string(tier.."_network", string.format("%.20g", network_id))
+				meta:set_int(tier.."_EU_timeout", 2)
 				if     eu_type == technic.producer then
 					table.insert(network.PR_nodes, pos)
 				elseif eu_type == technic.receiver then
@@ -89,7 +110,7 @@ local function clear_networks(pos)
 				end
 				-- Note: SPECIAL (i.e. switching station) is not traversed!
 			end
-			elseif dead_end and not placed then
+		else
 			-- Dead end removed, remove it from the network
 			-- Get the network
 			local network_id = technic.cables[minetest.hash_node_position(positions[1])]
@@ -112,15 +133,16 @@ local function clear_networks(pos)
 					end
 				end
 			end
-			else
+		end
+		return
+	end
+
+	clear_network(technic.cables[minetest.hash_node_position(pos)])
+
+	for _,connected_pos in pairs(positions) do
+		local network_id = technic.cables[minetest.hash_node_position(connected_pos)]
 		-- Not a dead end, so the whole network needs to be recalculated
-				for _,v in pairs(technic.networks[net].all_nodes) do
+		clear_network(network_id)
-					local pos1 = minetest.hash_node_position(v)
-					technic.cables[pos1] = nil
-				end
-				technic.networks[net] = nil
-			end
-		end
 	end
 end
 
@@ -170,7 +192,7 @@ function technic.register_cable(tier, size)
 		connects_to = {"group:technic_"..ltier.."_cable",
 			"group:technic_"..ltier, "group:technic_all_tiers"},
 		on_construct = clear_networks,
-		on_destruct = clear_networks,
+		after_destruct = clear_networks,
 	})
 
 	local xyz = {
@@ -210,7 +232,7 @@ function technic.register_cable(tier, size)
 			connects_to = {"group:technic_"..ltier.."_cable",
 				"group:technic_"..ltier, "group:technic_all_tiers"},
 			on_construct = clear_networks,
-			on_destruct = clear_networks,
+			after_destruct = clear_networks,
 		}
 		def.node_box.fixed = {
 			{-size, -size, -size, size, size, size},

technic/machines/register/compressor_recipes.lua

@@ -8,6 +8,71 @@ function technic.register_compressor_recipe(data)
 	technic.register_recipe("compressing", data)
 end
 
+-- Defuse the default recipes, since we have
+-- the compressor to take over in a more realistic manner.
+local crafts_to_clear = {
+	"default:desert_sand",
+	"default:sand",
+	"default:silver_sand",
+}
+
+local dependent_crafts_to_clear = {
+	everness = {
+		"everness:coral_sand",
+		"everness:coral_forest_deep_ocean_sand",
+		"everness:coral_white_sand",
+		"everness:crystal_sand",
+		"everness:cursed_sand",
+		"everness:cursed_lands_deep_ocean_sand",
+		"everness:crystal_forest_deep_ocean_sand",
+		"everness:mineral_sand",
+	},
+	nether = {
+		"nether:brick",
+		"nether:brick_compressed",
+		"nether:rack",
+		"nether:rack_deep",
+	},
+}
+
+-- Add dependent recipes to main collection of
+-- recipes to be cleared if their mods are used.
+for dependency, crafts in pairs(dependent_crafts_to_clear) do
+	if minetest.get_modpath(dependency) then
+		for _, craft_entry in ipairs(crafts) do
+			table.insert(crafts_to_clear, craft_entry)
+		end
+	end
+end
+
+-- Clear recipes
+for _, craft_name in ipairs(crafts_to_clear) do
+	-- Regular bricks are 2x2 shaped, nether bricks are 3x3 shaped (irregular)
+	local is_regular = string.sub(craft_name, 1, 12) ~= "nether:brick"
+	local shaped_recipe
+
+	if is_regular then
+		shaped_recipe = {
+			{craft_name, craft_name},
+			{craft_name, craft_name},
+		}
+	else
+		shaped_recipe = {
+			{craft_name, craft_name, craft_name},
+			{craft_name, craft_name, craft_name},
+			{craft_name, craft_name, craft_name},
+		}
+	end
+
+	minetest.clear_craft({
+		type = "shaped",
+		recipe = shaped_recipe,
+	})
+end
+
+--
+-- Compile compressor recipes
+--
 local recipes = {
 	{"default:snowblock",          "default:ice"},
 	{"default:sand 2",             "default:sandstone"},
@@ -21,8 +86,8 @@ local recipes = {
 	{"technic:uranium35_ingot 5",  "technic:uranium_fuel"},
 }
 
-if minetest.get_modpath("everness") then
+local dependent_recipes = {
-	local everness_sand_to_sandstone_recipes = {
+	everness = {
 		{"everness:coral_deep_ocean_sand 2",          "everness:coral_deep_ocean_sandstone_block"},
 		{"everness:coral_sand 2",                     "everness:coral_sandstone"},
 		{"everness:coral_white_sand 2",               "everness:coral_white_sandstone"},
@@ -31,47 +96,26 @@ if minetest.get_modpath("everness") then
 		{"everness:cursed_lands_deep_ocean_sand 2",   "everness:cursed_lands_deep_ocean_sandstone_block"},
 		{"everness:cursed_sand 2",                    "everness:cursed_sandstone_block"},
 		{"everness:mineral_sand 2",                   "everness:mineral_sandstone"},
-	}
+	},
-
+	nether = {
-	for _, data in ipairs(everness_sand_to_sandstone_recipes) do
+		{"nether:brick 9",				"nether:brick_compressed"},
-		table.insert(recipes, {data[1], data[2]})
+		{"nether:brick_compressed 9",	"nether:nether_lump"},
-	end
+		{"nether:rack",                 "nether:brick",},
-end
+		{"nether:rack_deep",            "nether:brick_deep"},
-
+	},
--- defuse the default sandstone recipe, since we have the compressor to take over in a more realistic manner
-local crafts_to_clear = {
-	"default:desert_sand",
-	"default:sand",
-	"default:silver_sand"
 }
 
-if minetest.get_modpath("everness") then
+-- Add dependent recipes to main recipe collection
-	local everness_crafts_to_clear = {
+-- if their mods are used.
-		"everness:coral_sand",
+for dependency, recipes_to_add in pairs(dependent_recipes) do
-		"everness:coral_forest_deep_ocean_sand",
+	if minetest.get_modpath(dependency) then
-		"everness:coral_white_sand",
+		for _, recipe_entry in ipairs(recipes_to_add) do
-		"everness:crystal_sand",
+			table.insert(recipes, recipe_entry)
-		"everness:cursed_sand",
+		end
-		"everness:cursed_lands_deep_ocean_sand",
-		"everness:crystal_forest_deep_ocean_sand",
-		"everness:mineral_sand",
-	}
-
-	for _, sand_name in ipairs(everness_crafts_to_clear) do
-		table.insert(crafts_to_clear, sand_name)
 	end
 end
 
-for _, sand_name in ipairs(crafts_to_clear) do
+-- Register compressor recipes
-	minetest.clear_craft({
-		type = "shaped",
-		recipe = {
-			{sand_name, sand_name},
-			{sand_name, sand_name},
-		},
-	})
-end
-
 for _, data in pairs(recipes) do
 	technic.register_compressor_recipe({input = {data[1]}, output = data[2]})
 end

technic/machines/register/grinder_recipes.lua

@@ -36,73 +36,73 @@ local recipes = {
 	{"default:ice",              "default:snowblock"},
 }
 
-if minetest.get_modpath("everness") then
+local dependent_recipes = {
-	table.insert(recipes, {"everness:coral_deep_ocean_sandstone_block",          "everness:coral_deep_ocean_sand 2"})
+	-- Sandstones
-	table.insert(recipes, {"everness:coral_sandstone",                           "everness:coral_sand 2"})
+	everness = {
-	table.insert(recipes, {"everness:coral_white_sandstone",                     "everness:coral_white_sand 2"})
+		{"everness:coral_deep_ocean_sandstone_block",			"everness:coral_deep_ocean_sand 2"},
-	table.insert(recipes, {"everness:crystal_forest_deep_ocean_sandstone_block", "everness:crystal_forest_deep_ocean_sand 2"})
+		{"everness:coral_sandstone",							"everness:coral_sand 2"},
-	table.insert(recipes, {"everness:crystal_sandstone",                         "everness:crystal_sand 2"})
+		{"everness:coral_white_sandstone",						"everness:coral_white_sand 2"},
-	table.insert(recipes, {"everness:cursed_lands_deep_ocean_sandstone_block",   "everness:cursed_lands_deep_ocean_sand 2"})
+		{"everness:crystal_forest_deep_ocean_sandstone_block",	"everness:crystal_forest_deep_ocean_sand 2"},
-	table.insert(recipes, {"everness:cursed_sandstone_block",                    "everness:cursed_sand 2"})
+		{"everness:crystal_sandstone",							"everness:crystal_sand 2"},
-	table.insert(recipes, {"everness:mineral_sandstone",                         "everness:mineral_sand 2"})
+		{"everness:cursed_lands_deep_ocean_sandstone_block",	"everness:cursed_lands_deep_ocean_sand 2"},
+		{"everness:cursed_sandstone_block",						"everness:cursed_sand 2"},
+		{"everness:mineral_sandstone",							"everness:mineral_sand 2"},
+	-- Lumps and wheat
+		{"everness:pyrite_lump",	"technic:pyrite_dust 2"},
+	},
+	farming = {
+		{"farming:seed_wheat",		"farming:flour 1"},
+	},
+	gloopores = {
+		{"gloopores:alatro_lump",	"technic:alatro_dust 2"},
+		{"gloopores:kalite_lump",	"technic:kalite_dust 2"},
+		{"gloopores:arol_lump",		"technic:arol_dust 2"},
+		{"gloopores:talinite_lump",	"technic:talinite_dust 2"},
+		{"gloopores:akalin_lump",	"technic:akalin_dust 2"},
+	},
+	homedecor = {
+		{"home_decor:brass_ingot",	"technic:brass_dust 1"},
+	},
+	moreores = {
+		{"moreores:mithril_lump",	"technic:mithril_dust 2"},
+		{"moreores:silver_lump",	"technic:silver_dust 2"},
+	},
+	nether = {
+		{"nether:nether_lump",		"technic:nether_dust 2"},
+	},
+}
+
+for dependency, materials_to_add in pairs(dependent_recipes) do
+	if minetest.get_modpath(dependency) then
+		for _, material_entry in ipairs(materials_to_add) do
+			table.insert(recipes, material_entry)
+		end
+	end
 end
 
 -- defuse the sandstone -> 4 sand recipe to avoid infinite sand bugs (also consult the inverse compressor recipe)
 minetest.clear_craft({
-	recipe = {
+	recipe = {{"default:sandstone"}},
-		{"default:sandstone"}
-	},
 })
 minetest.clear_craft({
-	recipe = {
+	recipe = {{"default:desert_sandstone"}},
-		{"default:desert_sandstone"}
-	},
 })
 minetest.clear_craft({
-	recipe = {
+	recipe = {{"default:silver_sandstone"}},
-		{"default:silver_sandstone"}
-	},
 })
 
 if minetest.get_modpath("everness") then
 	minetest.clear_craft({
-		recipe = {
+		recipe = {{"everness:mineral_sandstone"}},
-			{"everness:mineral_sandstone"}
-		},
 	})
 	-- Currently (2024-03-09), there seem to be no reverse recipes for any of the other everness sandstones.
 end
 
-if minetest.get_modpath("farming") then
+for _, data in ipairs(recipes) do
-	table.insert(recipes, {"farming:seed_wheat",   "farming:flour 1"})
-end
-
-if minetest.get_modpath("moreores") then
-	table.insert(recipes, {"moreores:mithril_lump",   "technic:mithril_dust 2"})
-	table.insert(recipes, {"moreores:silver_lump",    "technic:silver_dust 2"})
-end
-
-if minetest.get_modpath("gloopores") or minetest.get_modpath("glooptest") then
-	table.insert(recipes, {"gloopores:alatro_lump",   "technic:alatro_dust 2"})
-	table.insert(recipes, {"gloopores:kalite_lump",   "technic:kalite_dust 2"})
-	table.insert(recipes, {"gloopores:arol_lump",     "technic:arol_dust 2"})
-	table.insert(recipes, {"gloopores:talinite_lump", "technic:talinite_dust 2"})
-	table.insert(recipes, {"gloopores:akalin_lump",   "technic:akalin_dust 2"})
-end
-
-if minetest.get_modpath("homedecor") then
-	table.insert(recipes, {"home_decor:brass_ingot", "technic:brass_dust 1"})
-end
-
-if minetest.get_modpath("everness") then
-	table.insert(recipes, {"everness:pyrite_lump",  "technic:pyrite_dust 2"})
-end
-
-for _, data in pairs(recipes) do
 	technic.register_grinder_recipe({input = {data[1]}, output = data[2]})
 end
 
--- dusts
+-- Dusts
 local function register_dust(name, ingot)
 	local lname = string.lower(name)
 	lname = string.gsub(lname, ' ', '_')
@@ -120,36 +120,57 @@ local function register_dust(name, ingot)
 	end
 end
 
--- Sorted alphibeticaly
+-- Sorted alphabetically
-register_dust("Brass",           "basic_materials:brass_ingot")
+local dusts = {
-register_dust("Bronze",          "default:bronze_ingot")
+	{"Brass",           "basic_materials:brass_ingot"},
-register_dust("Carbon Steel",    "technic:carbon_steel_ingot")
+	{"Bronze",          "default:bronze_ingot"},
-register_dust("Cast Iron",       "technic:cast_iron_ingot")
+	{"Carbon Steel",    "technic:carbon_steel_ingot"},
-register_dust("Chernobylite",    "technic:chernobylite_block")
+	{"Cast Iron",       "technic:cast_iron_ingot"},
-register_dust("Chromium",        "technic:chromium_ingot")
+	{"Chernobylite",    "technic:chernobylite_block"},
-register_dust("Coal",            nil)
+	{"Chromium",        "technic:chromium_ingot"},
-register_dust("Copper",          "default:copper_ingot")
+	{"Coal",            nil},
-register_dust("Lead",            "technic:lead_ingot")
+	{"Copper",          "default:copper_ingot"},
-register_dust("Gold",            "default:gold_ingot")
+	{"Lead",            "technic:lead_ingot"},
-register_dust("Mithril",         "moreores:mithril_ingot")
+	{"Gold",            "default:gold_ingot"},
-register_dust("Silver",          "moreores:silver_ingot")
+	{"Mithril",         "moreores:mithril_ingot"},
-register_dust("Stainless Steel", "technic:stainless_steel_ingot")
+	{"Silver",          "moreores:silver_ingot"},
-register_dust("Stone",           "default:stone")
+	{"Stainless Steel", "technic:stainless_steel_ingot"},
-register_dust("Sulfur",          nil)
+	{"Stone",           "default:stone"},
-register_dust("Tin",             "default:tin_ingot")
+	{"Sulfur",          nil},
-register_dust("Wrought Iron",    "technic:wrought_iron_ingot")
+	{"Tin",             "default:tin_ingot"},
-register_dust("Zinc",            "technic:zinc_ingot")
+	{"Wrought Iron",    "technic:wrought_iron_ingot"},
-if minetest.get_modpath("gloopores") or minetest.get_modpath("glooptest") then
+	{"Zinc",            "technic:zinc_ingot"},
-	register_dust("Akalin",          "glooptest:akalin_ingot")
+}
-	register_dust("Alatro",          "glooptest:alatro_ingot")
+
-	register_dust("Arol",            "glooptest:arol_ingot")
+local dependent_dusts = {
-	register_dust("Kalite",          nil)
+	everness = {
-	register_dust("Talinite",        "glooptest:talinite_ingot")
+		{"Pyrite",          "everness:pyrite_ingot"},
-end
+	},
-if minetest.get_modpath("everness") then
+	gloopores = {
-	register_dust("Pyrite",          "everness:pyrite_ingot")
+		{"Akalin",          "glooptest:akalin_ingot"},
+		{"Alatro",          "glooptest:alatro_ingot"},
+		{"Arol",            "glooptest:arol_ingot"},
+		{"Kalite",          nil},
+		{"Talinite",        "glooptest:talinite_ingot"},
+	},
+	nether = {
+		{"Nether",          "nether:nether_ingot"},
+	},
+}
+
+for dependency, dusts_to_add in pairs(dependent_dusts) do
+	if minetest.get_modpath(dependency) then
+		for _, dust_entry in pairs(dusts_to_add) do
+			table.insert(dusts, dust_entry)
+		end
+	end
 end
 
+for _, data in ipairs(dusts) do
+	register_dust(data[1], data[2])
+end
+
+-- Uranium
 for p = 0, 35 do
 	local nici = (p ~= 0 and p ~= 7 and p ~= 35) and 1 or nil
 	local psuffix = p == 7 and "" or p
@@ -185,6 +206,7 @@ for pa = 0, 34 do
 	end
 end
 
+-- Fuels
 minetest.register_craft({
 	type = "fuel",
 	recipe = "technic:coal_dust",

technic/machines/register/recipes.lua

@@ -32,7 +32,10 @@ function technic.register_recipe_type(typename, origdata)
 end
 
 local function get_recipe_index(items)
-	if not items or type(items) ~= "table" then return false end
+	if type(items) ~= "table" then
+		return false
+	end
+
 	local l = {}
 	for i, stack in ipairs(items) do
 		l[i] = ItemStack(stack):get_name()
@@ -75,22 +78,21 @@ local function register_recipe(typename, data)
 	end
 	if (have_cg or have_i3) and technic.recipes[typename].output_size == 1 then
 		local result = data.output
-		if (type(result)=="table") then
+		if type(result) == "table" then
 			result = result[1]
 		end
-		local items = table.concat(data.input, ", ")
 		if have_cg and craftguide.register_craft then
 			craftguide.register_craft({
 				type = typename,
 				result = result,
-				items = {items},
+				items = data.input,
 			})
 		end
 		if have_i3 then
 			i3.register_craft({
 				type = typename,
 				result = result,
-				items = {items},
+				items = data.input,
 			})
 		end
 	end

technic/machines/switching_station.lua

@@ -97,12 +97,14 @@ local function flatten(map)
 	return list
 end
 
--- Add a wire node to the LV/MV/HV network
+-- Add a node to the LV/MV/HV network
--- Returns: indicator whether the cable is new in the network
+-- Returns: indicator whether the node is new in the network
 local hash_node_position = minetest.hash_node_position
 local function add_network_node(nodes, pos, network_id)
 	local node_id = hash_node_position(pos)
+	if network_id then
 		technic.cables[node_id] = network_id
+	end
 	if nodes[node_id] then
 		return false
 	end
@@ -136,21 +138,31 @@ local check_node_subp = function(network, pos, machines, sw_pos, from_below, net
 	local meta = minetest.get_meta(pos)
 	-- Normal tostring() does not have enough precision, neither does meta:set_int()
 	-- Lua 5.1 bug: Cannot use hexadecimal notation for compression (see LuaJIT #911)
-	meta:set_string(network.tier.."_network", string.format("%.20g", network_id))
+	local network_str = string.format("%.20g", network_id)
+	local network_key = network.tier.."_network"
+	local m_network_str = meta:get_string(network_key)
+
+	if m_network_str == "" then
+		meta:set_string(network_key, network_str)
+	else
+		if m_network_str ~= network_str then
+			return
+		end
+	end
 
 	if     eu_type == technic.producer then
-		add_network_node(network.PR_nodes, pos, network_id)
+		add_network_node(network.PR_nodes, pos)
 	elseif eu_type == technic.receiver then
-		add_network_node(network.RE_nodes, pos, network_id)
+		add_network_node(network.RE_nodes, pos)
 	elseif eu_type == technic.producer_receiver then
-		add_network_node(network.PR_nodes, pos, network_id)
+		add_network_node(network.PR_nodes, pos)
-		add_network_node(network.RE_nodes, pos, network_id)
+		add_network_node(network.RE_nodes, pos)
 	elseif eu_type == technic.battery then
-		add_network_node(network.BA_nodes, pos, network_id)
+		add_network_node(network.BA_nodes, pos)
 	elseif eu_type == "SPECIAL" and from_below and
 			not vector.equals(pos, sw_pos) then
 		-- Another switching station -> disable it
-		add_network_node(network.SP_nodes, pos, network_id)
+		add_network_node(network.SP_nodes, pos)
 		meta:set_int("active", 0)
 	end
 
@@ -193,7 +205,6 @@ local get_network = function(sw_pos, cable_pos, tier)
 		end
 		return cached.PR_nodes, cached.BA_nodes, cached.RE_nodes
 	end
-
 	local machines = technic.machines[tier]
 	local network = {
 		tier = tier,
@@ -455,6 +466,7 @@ local function switching_station_timeout_count(pos, tier)
 	local meta = minetest.get_meta(pos)
 	local timeout = meta:get_int(tier.."_EU_timeout")
 	if timeout <= 0 then
+		meta:set_string(tier.."_network", "")
 		meta:set_int(tier.."_EU_input", 0) -- Not needed anymore <-- actually, it is for supply converter
 		return true
 	else
@@ -468,22 +480,29 @@ minetest.register_abm({
 	interval   = 1,
 	chance     = 1,
 	action = function(pos, node, active_object_count, active_object_count_wider)
+		local has_network = false
+		local technic_machine = false
 		for tier, machines in pairs(technic.machines) do
-			if machines[node.name] and switching_station_timeout_count(pos, tier) then
+			if machines[node.name] then
+				technic_machine = true
+				if not switching_station_timeout_count(pos, tier) then
+					has_network = true
+				end
+			end
+		end
+
+		if technic_machine and not has_network then
 			local nodedef = minetest.registered_nodes[node.name]
-				if nodedef then
 			local meta = minetest.get_meta(pos)
 			meta:set_string("infotext", S("%s Has No Network"):format(nodedef.description))
-				end
+			if nodedef.technic_disabled_machine_name then
-				if nodedef and nodedef.technic_disabled_machine_name then
 				node.name = nodedef.technic_disabled_machine_name
 				minetest.swap_node(pos, node)
 			end
-				if nodedef and nodedef.technic_on_disable then
+			if nodedef.technic_on_disable then
 				nodedef.technic_on_disable(pos, node)
 			end
 		end
-		end
 	end,
 })
 

technic/mod.conf

@@ -1,3 +1,3 @@
 name = technic
 depends = default, pipeworks, technic_worldgen, basic_materials
-optional_depends = bucket, screwdriver, mesecons, mesecons_mvps, digilines, digiline_remote, intllib, unified_inventory, vector_extras, dye, craftguide, i3, everness
+optional_depends = bucket, screwdriver, mesecons, mesecons_mvps, digilines, digiline_remote, intllib, unified_inventory, vector_extras, dye, craftguide, i3, everness, nether

technic/tools/chainsaw.lua

@@ -128,6 +128,7 @@ local function dig_recursive(x, y, z)
 	if safe_cut and cutter.param2[i] ~= 0 then
 		-- Do not dig manually placed nodes
 		-- Problem: moretrees' generated jungle trees use param2 = 2
+		cutter.stopped_by_safe_cut = true
 		return
 	end
 
@@ -201,6 +202,11 @@ local function chainsaw_dig(player, pos, remaining_charge)
 		return
 	end
 
+	if cutter.stopped_by_safe_cut then
+		minetest.chat_send_player(player_name, S("The chainsaw could not dig all nodes" ..
+			" because the safety mechanism was activated."))
+	end
+
 	minetest.sound_play("chainsaw", {
 		pos = pos,
 		gain = 1.0,

technic/tools/sonic_screwdriver.lua

@@ -8,14 +8,6 @@ technic.register_power_tool("technic:sonic_screwdriver", sonic_screwdriver_max_c
 local ROTATE_FACE = 1
 local ROTATE_AXIS = 2
 
-local function nextrange(x, max)
-	x = x + 1
-	if x > max then
-		x = 0
-	end
-	return x
-end
-
 -- Handles rotation
 local function screwdriver_handler(itemstack, user, pointed_thing, mode)
 	if pointed_thing.type ~= "node" then
@@ -31,16 +23,80 @@ local function screwdriver_handler(itemstack, user, pointed_thing, mode)
 
 	local node = minetest.get_node(pos)
 	local ndef = minetest.registered_nodes[node.name]
-	if not ndef or not ndef.paramtype2 == "facedir" or
+
-			(ndef.drawtype == "nodebox" and
+	if not ndef then return end
-			not ndef.node_box.type == "fixed") or
+
-			node.param2 == nil then
+	local paramtype2 = ndef.paramtype2
-		return
-	end
 
 	-- contrary to the default screwdriver, do not check for can_dig, to allow rotating machines with CLU's in them
 	-- this is consistent with the previous sonic screwdriver
 
+	-- Set param2
+	local new_param2
+	local param2 = node.param2
+
+	local dirs_per_axis = 4
+
+	local dir_components = {
+		-- 2^5, 5 bits
+		facedir = 32,
+		colorfacedir = 32,
+		colordegrotate = 32,
+
+		-- 2^2, 2 bits
+		["4dir"] = 4, -- lua doesn't like it when vars start with a digit
+		color4dir = 4,
+	}
+
+	local dir_component = dir_components[paramtype2]
+
+	local floor = math.floor
+	-- non-direction data is preserved whether it be color or otherwise
+	if (paramtype2 == "facedir") or (paramtype2 == "colorfacedir") then
+		local aux = floor(param2 / dir_component)
+		local dir = param2 % dir_component
+
+		if mode == ROTATE_FACE then
+			dir = (floor(param2 / dirs_per_axis)) * dirs_per_axis + ((dir + 1) % dirs_per_axis)
+		elseif mode == ROTATE_AXIS then
+			dir = ((floor(param2 / dirs_per_axis) + 1) * dirs_per_axis) % 24
+		end
+
+		new_param2 = aux * dir_component + dir
+	elseif (paramtype2 == "4dir") or (paramtype2 == "color4dir") then
+		local aux = floor(param2 / dir_component)
+		local dir = param2 % dir_component
+
+		if mode == ROTATE_FACE then
+			dir = (dir + 1) % dirs_per_axis
+		elseif mode == ROTATE_AXIS then
+			dir = 0
+		end
+
+		new_param2 = aux * dir_component + dir
+	elseif (paramtype2 == "degrotate") then
+		if mode == ROTATE_FACE then
+			new_param2 = param2 + 1
+		elseif mode == ROTATE_AXIS then
+			new_param2 = param2 + 20
+		end
+		new_param2 = new_param2 % 240
+	elseif (paramtype2 == "colordegrotate") then
+		local aux = floor(param2 / dir_component)
+		local rotation = param2 % dir_component
+
+		if mode == ROTATE_FACE then
+			rotation = rotation + 1
+		elseif mode == ROTATE_AXIS then
+			rotation = rotation + 4
+		end
+		rotation = rotation % 24
+
+		new_param2 = aux * dir_component + rotation
+	else
+		return
+	end
+
 	local meta = technic.get_stack_meta(itemstack)
 	local charge = meta:get_int("technic:charge")
 	if charge < 100 then
@@ -49,19 +105,7 @@ local function screwdriver_handler(itemstack, user, pointed_thing, mode)
 
 	minetest.sound_play("technic_sonic_screwdriver", {pos = pos, gain = 0.3, max_hear_distance = 10})
 
-	-- Set param2
+	node.param2 = new_param2
-	local rotationPart = node.param2 % 32 -- get first 4 bits
-	local preservePart = node.param2 - rotationPart
-
-	local axisdir = math.floor(rotationPart / 4)
-	local rotation = rotationPart - axisdir * 4
-	if mode == ROTATE_FACE then
-		rotationPart = axisdir * 4 + nextrange(rotation, 3)
-	elseif mode == ROTATE_AXIS then
-		rotationPart = nextrange(axisdir, 5) * 4
-	end
-
-	node.param2 = preservePart + rotationPart
 	minetest.swap_node(pos, node)
 
 	if not technic.creative_mode then

technic_cnc/cnc.lua

@@ -72,64 +72,46 @@ else
 	end
 end
 
-local onesize_products = {
+local function add_buttons(do_variants, t, x, y)
-	slope                    = 2,
+	local X_OFFSET = 1
-	slope_edge               = 1,
+	local BUTTONS_PER_ROW = 7
-	slope_inner_edge         = 1,
-	pyramid                  = 2,
-	spike                    = 1,
-	cylinder                 = 2,
-	oblate_spheroid          = 1,
-	sphere                   = 1,
-	stick                    = 8,
-	slope_upsdown            = 2,
-	slope_edge_upsdown       = 1,
-	slope_inner_edge_upsdown = 1,
-	cylinder_horizontal      = 2,
-	slope_lying              = 2,
-	onecurvededge            = 1,
-	twocurvededge            = 1,
-}
-local twosize_products = {
-	element_straight         = 2,
-	element_end              = 2,
-	element_cross            = 1,
-	element_t                = 1,
-	element_edge             = 2,
-}
 
-local cnc_formspec =
+	-- ipairs: only iterate over continuous integers
-	"size[9,11;]"..
+	for _, data in ipairs(technic_cnc.programs) do
-	"label[1,0;"..S("Choose Milling Program:").."]"..
+		-- Never add full variants. Only add half variants when asked
-	"image_button[1,0.5;1,1;technic_cnc_slope.png;slope; ]"..
+		if not data.half_counterpart and (do_variants == (data.full_counterpart ~= nil)) then
-	"image_button[2,0.5;1,1;technic_cnc_slope_edge.png;slope_edge; ]"..
+			--print("add", data.suffix)
-	"image_button[3,0.5;1,1;technic_cnc_slope_inner_edge.png;slope_inner_edge; ]"..
+			t[#t + 1] = ("image_button[%g,%g;1,1;%s.png;%s; ]"):format(
-	"image_button[4,0.5;1,1;technic_cnc_pyramid.png;pyramid; ]"..
+				x + X_OFFSET, y, data.suffix, data.short_name
-	"image_button[5,0.5;1,1;technic_cnc_spike.png;spike; ]"..
+			)
-	"image_button[6,0.5;1,1;technic_cnc_cylinder.png;cylinder; ]"..
+			t[#t + 1] = ("tooltip[%s;%s]"):format(
-	"image_button[7,0.5;1,1;technic_cnc_oblate_spheroid.png;oblate_spheroid; ]"..
+				data.short_name, minetest.formspec_escape(data.desc .. " (* " .. data.output .. ")")
-	"image_button[8,0.5;1,1;technic_cnc_stick.png;stick; ]"..
+			)
 
-	"image_button[1,1.5;1,1;technic_cnc_slope_upsdwn.png;slope_upsdown; ]"..
+			x = x + 1
-	"image_button[2,1.5;1,1;technic_cnc_slope_edge_upsdwn.png;slope_edge_upsdown; ]"..
+			if x == BUTTONS_PER_ROW then
-	"image_button[3,1.5;1,1;technic_cnc_slope_inner_edge_upsdwn.png;slope_inner_edge_upsdown; ]"..
+				x = 0
-	"image_button[4,1.5;1,1;technic_cnc_cylinder_horizontal.png;cylinder_horizontal; ]"..
+				y = y + 1
-	"image_button[5,1.5;1,1;technic_cnc_sphere.png;sphere; ]"..
+			end
+		end
+	end
+end
 
-	"image_button[1,2.5;1,1;technic_cnc_slope_lying.png;slope_lying; ]"..
+local function make_formspec()
-	"image_button[2,2.5;1,1;technic_cnc_onecurvededge.png;onecurvededge; ]"..
+	local t = {
-	"image_button[3,2.5;1,1;technic_cnc_twocurvededge.png;twocurvededge; ]"..
+		"size[9,11;]",
+		"label[1,0;"..S("Choose Milling Program:").."]",
+	}
+	add_buttons(false, t, 0, 0.5)
 
+	t[#t + 1] = (
 		"label[1,3.5;"..S("Slim Elements half / normal height:").."]"..
-
 		"image_button[1,4;1,0.5;technic_cnc_full.png;full; ]"..
-	"image_button[1,4.5;1,0.5;technic_cnc_half.png;half; ]"..
+		"image_button[1,4.5;1,0.5;technic_cnc_half.png;half; ]"
-	"image_button[2,4;1,1;technic_cnc_element_straight.png;element_straight; ]"..
+	)
-	"image_button[3,4;1,1;technic_cnc_element_end.png;element_end; ]"..
+	add_buttons(true, t, 1, 4)
-	"image_button[4,4;1,1;technic_cnc_element_cross.png;element_cross; ]"..
-	"image_button[5,4;1,1;technic_cnc_element_t.png;element_t; ]"..
-	"image_button[6,4;1,1;technic_cnc_element_edge.png;element_edge; ]"..
 
+	t[#t + 1] = (
 		"label[0, 5;"..S("In:").."]"..
 		"list[current_name;src;0.5,5.5;1,1;]"..
 		"label[4, 5;"..S("Out:").."]"..
@@ -140,6 +122,18 @@ local cnc_formspec =
 		"listring[current_player;main]"..
 		"listring[current_name;src]"..
 		"listring[current_player;main]"
+	)
+
+	return table.concat(t)
+end
+
+local cnc_formspec = nil
+
+minetest.register_on_mods_loaded(function()
+	technic_cnc._populate_shortcuts()
+	cnc_formspec = make_formspec()
+end)
+
 
 -- The form handler is declared here because we need it in both the inactive and active modes
 -- in order to be able to change programs wile it is running.
@@ -168,27 +162,28 @@ local function form_handler(pos, formname, fields, sender)
 
 	for k, _ in pairs(fields) do
 		-- Set a multipier for the half/full size capable blocks
-		local multiplier
+		local program = technic_cnc.programs["technic_cnc_" .. k]
-		if twosize_products[k] ~= nil then
+		if size == 1 and program and program.full_counterpart then
-			multiplier = size * twosize_products[k]
+			program = technic_cnc.programs["technic_cnc_" .. k .. "_double"]
-		else
-			multiplier = onesize_products[k]
 		end
+		if program then
+			local multiplier = program.output
+			local product = inputname .. "_" .. program.suffix
 
-		if onesize_products[k] ~= nil or twosize_products[k] ~= nil then
 			meta:set_float( "cnc_multiplier", multiplier)
 			meta:set_string("cnc_user", sender:get_player_name())
+
+			if program.half_counterpart then -- is full
+				if size == 1 then
+					meta:set_string("cnc_product", product)
+					--print(product, multiplier)
+				end
+				break -- no larger sizes allowed
 			end
 
-		if onesize_products[k] ~= nil or (twosize_products[k] ~= nil and size==2) then
+			-- half for normal
-			meta:set_string("cnc_product",  inputname .. "_technic_cnc_" .. k)
+			meta:set_string("cnc_product", product)
-			--print(inputname .. "_technic_cnc_" .. k)
+			--print(product, multiplier)
-			break
-		end
-
-		if twosize_products[k] ~= nil and size==1 then
-			meta:set_string("cnc_product",  inputname .. "_technic_cnc_" .. k .. "_double")
-			--print(inputname .. "_technic_cnc_" .. k .. "_double")
 			break
 		end
 	end
@@ -236,7 +231,7 @@ local run = function(pos, node)
 		meta:set_int("src_time", meta:get_int("src_time") + 1)
 		if meta:get_int("src_time") >= 3 then -- 3 ticks per output
 			meta:set_int("src_time", 0)
-			srcstack = inv:get_stack("src", 1)
+			local srcstack = inv:get_stack("src", 1)
 			srcstack:take_item()
 			inv:set_stack("src", 1, srcstack)
 			inv:add_item("dst", result.." "..meta:get_int("cnc_multiplier"))

technic_cnc/cnc_api.lua

@@ -8,16 +8,27 @@ local ALPHA_CLIP = minetest.features.use_texture_alpha_string_modes and "clip" o
 ------------------------------------------------------
 
 -- Define slope boxes for the various nodes
+--[[
+Additional keys after registration:
+	programs[program.suffix] = program
+
+Additional fields after registration:
+	program.short_name = (trimmed suffix)
+	program.full_counterpart = suffix (optional, for full/half variants)
+	program.half_counterpart = suffix (optional, for full/half variants)
+]]
 -------------------------------------------
 technic_cnc.programs = {
 	{ suffix  = "technic_cnc_stick",
 		model = {-0.15, -0.5, -0.15, 0.15, 0.5, 0.15},
-		desc  = S("Stick")
+		desc  = S("Stick"),
+		output = 8
 	},
 
 	{ suffix  = "technic_cnc_element_end_double",
 		model = {-0.3, -0.5, -0.3, 0.3, 0.5, 0.5},
-		desc  = S("Element End Double")
+		desc  = S("Element End Double"),
+		output = 2
 	},
 
 	{ suffix  = "technic_cnc_element_cross_double",
@@ -25,7 +36,8 @@ technic_cnc.programs = {
 			{0.3, -0.5, -0.3, 0.5, 0.5, 0.3},
 			{-0.3, -0.5, -0.5, 0.3, 0.5, 0.5},
 			{-0.5, -0.5, -0.3, -0.3, 0.5, 0.3}},
-		desc  = S("Element Cross Double")
+		desc  = S("Element Cross Double"),
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_element_t_double",
@@ -33,24 +45,28 @@ technic_cnc.programs = {
 			{-0.3, -0.5, -0.5, 0.3, 0.5, 0.3},
 			{-0.5, -0.5, -0.3, -0.3, 0.5, 0.3},
 			{0.3, -0.5, -0.3, 0.5, 0.5, 0.3}},
-		desc  = S("Element T Double")
+		desc  = S("Element T Double"),
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_element_edge_double",
 		model = {
 			{-0.3, -0.5, -0.5, 0.3, 0.5, 0.3},
 			{-0.5, -0.5, -0.3, -0.3, 0.5, 0.3}},
-		desc  = S("Element Edge Double")
+		desc  = S("Element Edge Double"),
+		output = 2
 	},
 
 	{ suffix  = "technic_cnc_element_straight_double",
 		model = {-0.3, -0.5, -0.5, 0.3, 0.5, 0.5},
-		desc  = S("Element Straight Double")
+		desc  = S("Element Straight Double"),
+		output = 2
 	},
 
 	{ suffix  = "technic_cnc_element_end",
 		model = {-0.3, -0.5, -0.3, 0.3, 0, 0.5},
-		desc  = S("Element End")
+		desc  = S("Element End"),
+		output = nil -- calculated
 	},
 
 	{ suffix  = "technic_cnc_element_cross",
@@ -58,7 +74,8 @@ technic_cnc.programs = {
 			{0.3, -0.5, -0.3, 0.5, 0, 0.3},
 			{-0.3, -0.5, -0.5, 0.3, 0, 0.5},
 			{-0.5, -0.5, -0.3, -0.3, 0, 0.3}},
-		desc  = S("Element Cross")
+		desc  = S("Element Cross"),
+		output = nil -- calculated
 	},
 
 	{ suffix  = "technic_cnc_element_t",
@@ -66,19 +83,22 @@ technic_cnc.programs = {
 			{-0.3, -0.5, -0.5, 0.3, 0, 0.3},
 			{-0.5, -0.5, -0.3, -0.3, 0, 0.3},
 			{0.3, -0.5, -0.3, 0.5, 0, 0.3}},
-		desc  = S("Element T")
+		desc  = S("Element T"),
+		output = nil -- calculated
 	},
 
 	{ suffix  = "technic_cnc_element_edge",
 		model = {
 			{-0.3, -0.5, -0.5, 0.3, 0, 0.3},
 			{-0.5, -0.5, -0.3, -0.3, 0, 0.3}},
-		desc  = S("Element Edge")
+		desc  = S("Element Edge"),
+		output = nil -- calculated
 	},
 
 	{ suffix  = "technic_cnc_element_straight",
 		model = {-0.3, -0.5, -0.5, 0.3, 0, 0.5},
-		desc  = S("Element Straight")
+		desc  = S("Element Straight"),
+		output = nil -- calculated
 	},
 
 	{ suffix  = "technic_cnc_oblate_spheroid",
@@ -91,32 +111,38 @@ technic_cnc.programs = {
 				{ -8/16, -4/16, -8/16, 8/16,  4/16, 8/16 },
 				{ -6/16, -8/16, -6/16, 6/16, -4/16, 6/16 }
 			}
-		}
+		},
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_sphere",
 		model = "technic_cnc_sphere.obj",
-		desc  = S("Sphere")
+		desc  = S("Sphere"),
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_cylinder_horizontal",
 		model = "technic_cnc_cylinder_horizontal.obj",
-		desc  = S("Horizontal Cylinder")
+		desc  = S("Horizontal Cylinder"),
+		output = 2
 	},
 
 	{ suffix  = "technic_cnc_cylinder",
 		model = "technic_cnc_cylinder.obj",
-		desc  = S("Cylinder")
+		desc  = S("Cylinder"),
+		output = 2
 	},
 
 	{ suffix  = "technic_cnc_twocurvededge",
 		model = "technic_cnc_two_curved_edge.obj",
-		desc  = S("Two Curved Edge/Corner Block")
+		desc  = S("Two Curved Edge/Corner Block"),
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_onecurvededge",
 		model = "technic_cnc_one_curved_edge.obj",
-		desc  = S("One Curved Edge Block")
+		desc  = S("One Curved Edge Block"),
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_spike",
@@ -130,7 +156,8 @@ technic_cnc.programs = {
 				{ -6/16, -4/16, -6/16, 6/16,     0, 6/16 },
 				{ -8/16, -8/16, -8/16, 8/16, -4/16, 8/16 }
 			}
-		}
+		},
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_pyramid",
@@ -144,7 +171,8 @@ technic_cnc.programs = {
 				{ -6/16, -6/16, -6/16, 6/16, -4/16, 6/16 },
 				{ -8/16, -8/16, -8/16, 8/16, -6/16, 8/16 }
 			}
-		}
+		},
+		output = 2
 	},
 
 	{ suffix  = "technic_cnc_slope_inner_edge_upsdown",
@@ -165,7 +193,8 @@ technic_cnc.programs = {
 				{ -0.5,   0.25, -0.25, 0.5,  0,     0.5  },
 				{ -0.5,   0.5,  -0.5,  0.5,  0.25,  0.5  }
 			}
-		}
+		},
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_slope_edge_upsdown",
@@ -179,7 +208,8 @@ technic_cnc.programs = {
 				{     0,     0,     0, 8/16, -4/16, 8/16 },
 				{  4/16, -4/16,  4/16, 8/16, -8/16, 8/16 }
 			}
-		}
+		},
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_slope_inner_edge",
@@ -200,7 +230,8 @@ technic_cnc.programs = {
 				{ -0.5,   0.25,  0.25, 0.5,  0.5,   0.5  },
 				{  0.25,  0.25, -0.5,  0.5,  0.5,   0.5  }
 			}
-		}
+		},
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_slope_edge",
@@ -214,7 +245,8 @@ technic_cnc.programs = {
 				{ -4/16, -4/16, -4/16, 8/16,     0, 8/16 },
 				{ -8/16, -8/16, -8/16, 8/16, -4/16, 8/16 }
 			}
-		}
+		},
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_slope_upsdown",
@@ -228,7 +260,8 @@ technic_cnc.programs = {
 				{ -8/16,     0,     0, 8/16, -4/16, 8/16 },
 				{ -8/16, -4/16,  4/16, 8/16, -8/16, 8/16 }
 			}
-		}
+		},
+		output = 1
 	},
 
 	{ suffix  = "technic_cnc_slope_lying",
@@ -242,7 +275,8 @@ technic_cnc.programs = {
 				{ -4/16, -8/16, -4/16,     0, 8/16, 8/16 },
 				{ -8/16, -8/16, -8/16, -4/16, 8/16, 8/16 }
 			}
-		}
+		},
+		output = 2
 	},
 
 	{ suffix  = "technic_cnc_slope",
@@ -256,11 +290,40 @@ technic_cnc.programs = {
 				{ -8/16, -4/16, -4/16, 8/16,     0, 8/16 },
 				{ -8/16, -8/16, -8/16, 8/16, -4/16, 8/16 }
 			}
-		}
+		},
+		output = 2
 	},
 
 }
 
+technic_cnc._populate_shortcuts = function()
+	-- Program quick access by string key
+	for _, data in ipairs(technic_cnc.programs) do
+		technic_cnc.programs[data.suffix] = data
+		data.short_name = assert(data.suffix:match("technic_cnc_(%S+)"))
+	end
+
+	-- Detect half/full counterparts
+	for k, data in pairs(technic_cnc.programs) do
+		if type(k) == "string" then
+			local full = technic_cnc.programs[k .. "_double"]
+			if full then
+				full.half_counterpart = k
+				data.full_counterpart = k .. "_double"
+				data.output = full.output * 2
+
+				--print("populate", k)
+			end
+		end
+	end
+
+	-- Final checks
+	for _, data in ipairs(technic_cnc.programs) do
+		assert(type(data.output) == "number", data.suffix)
+		assert(type(data.short_name) == "string", data.suffix)
+	end
+end
+
 -- Allow disabling certain programs for some node. Default is allowing all types for all nodes
 technic_cnc.programs_disable = {
 	-- ["default:brick"] = {"technic_cnc_stick"}, -- Example: Disallow the stick for brick
@@ -327,44 +390,3 @@ function technic_cnc.register_all(recipeitem, groups, images, description)
 	end
 end
 
--- REGISTER NEW TECHNIC_CNC_API's PART 2: technic_cnc..register_element_end(subname, recipeitem, groups, images, desc_element_xyz)
------------------------------------------------------------------------------------------------------------------------
-function technic_cnc.register_slope_edge_etc(recipeitem, groups, images, desc_slope, desc_slope_lying, desc_slope_upsdown, desc_slope_edge, desc_slope_inner_edge, desc_slope_upsdwn_edge, desc_slope_upsdwn_inner_edge, desc_pyramid, desc_spike, desc_onecurvededge, desc_twocurvededge, desc_cylinder, desc_cylinder_horizontal, desc_spheroid, desc_element_straight, desc_element_edge, desc_element_t, desc_element_cross, desc_element_end)
-		-- TODO: Remove this evil sorcery
-         technic_cnc.register_slope(recipeitem, groups, images, desc_slope)
-         technic_cnc.register_slope_lying(recipeitem, groups, images, desc_slope_lying)
-         technic_cnc.register_slope_upsdown(recipeitem, groups, images, desc_slope_upsdown)
-         technic_cnc.register_slope_edge(recipeitem, groups, images, desc_slope_edge)
-         technic_cnc.register_slope_inner_edge(recipeitem, groups, images, desc_slope_inner_edge)
-         technic_cnc.register_slope_edge_upsdown(recipeitem, groups, images, desc_slope_upsdwn_edge)
-         technic_cnc.register_slope_inner_edge_upsdown(recipeitem, groups, images, desc_slope_upsdwn_inner_edge)
-         technic_cnc.register_pyramid(recipeitem, groups, images, desc_pyramid)
-         technic_cnc.register_spike(recipeitem, groups, images, desc_spike)
-         technic_cnc.register_onecurvededge(recipeitem, groups, images, desc_onecurvededge)
-         technic_cnc.register_twocurvededge(recipeitem, groups, images, desc_twocurvededge)
-         technic_cnc.register_cylinder(recipeitem, groups, images, desc_cylinder)
-         technic_cnc.register_cylinder_horizontal(recipeitem, groups, images, desc_cylinder_horizontal)
-         technic_cnc.register_spheroid(recipeitem, groups, images, desc_spheroid)
-         technic_cnc.register_element_straight(recipeitem, groups, images, desc_element_straight)
-         technic_cnc.register_element_edge(recipeitem, groups, images, desc_element_edge)
-         technic_cnc.register_element_t(recipeitem, groups, images, desc_element_t)
-         technic_cnc.register_element_cross(recipeitem, groups, images, desc_element_cross)
-         technic_cnc.register_element_end(recipeitem, groups, images, desc_element_end)
-end
-
--- REGISTER STICKS: noncubic.register_xyz(recipeitem, groups, images, desc_element_xyz)
-------------------------------------------------------------------------------------------------------------
-function technic_cnc.register_stick_etc(recipeitem, groups, images, desc_stick)
-		-- TODO: Remove this evil sorcery
-         technic_cnc.register_stick(recipeitem, groups, images, desc_stick)
-end
-
-function technic_cnc.register_elements(recipeitem, groups, images, desc_element_straight_double, desc_element_edge_double, desc_element_t_double, desc_element_cross_double, desc_element_end_double)
-		-- TODO: Remove this evil sorcery
-         technic_cnc.register_element_straight_double(recipeitem, groups, images, desc_element_straight_double)
-         technic_cnc.register_element_edge_double(recipeitem, groups, images, desc_element_edge_double)
-         technic_cnc.register_element_t_double(recipeitem, groups, images, desc_element_t_double)
-         technic_cnc.register_element_cross_double(recipeitem, groups, images, desc_element_cross_double)
-         technic_cnc.register_element_end_double(recipeitem, groups, images, desc_element_end_double)
-end
-

technic_cnc/cnc_materials.lua

@@ -10,6 +10,7 @@ local function register_material(nodename, tiles_override, descr_override)
 	end
 
 	local groups = {
+		cracky = ndef.groups.cracky,
 		crumbly = ndef.groups.crumbly,
 		choppy = ndef.groups.choppy,
 		flammable = ndef.groups.flammable,
@@ -19,6 +20,12 @@ local function register_material(nodename, tiles_override, descr_override)
 		oddly_breakable_by_hand = ndef.groups.oddly_breakable_by_hand,
 		not_in_creative_inventory = 1,
 	}
+	local count = 0
+	for _ in pairs(groups) do
+		count = count + 1
+	end
+	assert(count >= 2, "Too few groups. node name=" .. nodename)
+
 	local tiles = tiles_override or { ndef.tiles[#ndef.tiles] }
 	assert(tiles and #tiles == 1, "Unknown tile format in node name=" .. nodename)
 

technic_cnc/models/technic_cnc_cylinder.obj

@@ -1,238 +1,205 @@
-# Blender v2.73 (sub 0) OBJ File: 'slope_test_cylinder_onetexture.blend'
+v 0 -0.5 -0.5
-# www.blender.org
+v 0 0.5 -0.5
-o Cylinder_Cylinder.001
+v 0.097545 0.5 -0.490393
-v 0.000000 -0.500000 -0.500000
+v 0.097545 -0.5 -0.490393
-v 0.000000 0.500000 -0.500000
+v 0.191342 0.5 -0.46194
-v 0.097545 -0.500000 -0.490393
+v 0.191342 -0.5 -0.46194
-v 0.097545 0.500000 -0.490393
+v 0.277785 0.5 -0.415735
-v 0.191342 -0.500000 -0.461940
+v 0.277785 -0.5 -0.415735
-v 0.191342 0.500000 -0.461940
+v 0.353553 0.5 -0.353554
-v 0.277785 -0.500000 -0.415735
+v 0.353553 -0.5 -0.353554
-v 0.277785 0.500000 -0.415735
+v 0.415735 0.5 -0.277785
-v 0.353553 -0.500000 -0.353554
+v 0.415735 -0.5 -0.277785
-v 0.353553 0.500000 -0.353554
+v 0.46194 0.5 -0.191342
-v 0.415735 -0.500000 -0.277785
+v 0.46194 -0.5 -0.191342
-v 0.415735 0.500000 -0.277785
+v 0.490393 0.5 -0.097545
-v 0.461940 -0.500000 -0.191342
+v 0.490393 -0.5 -0.097545
-v 0.461940 0.500000 -0.191342
+v 0.5 0.5 0
-v 0.490393 -0.500000 -0.097545
+v 0.5 -0.5 0
-v 0.490393 0.500000 -0.097545
+v 0.490393 0.5 0.097545
-v 0.500000 -0.500000 -0.000000
+v 0.490393 -0.5 0.097545
-v 0.500000 0.500000 -0.000000
+v 0.46194 0.5 0.191341
-v 0.490393 -0.500000 0.097545
+v 0.46194 -0.5 0.191341
-v 0.490393 0.500000 0.097545
+v 0.415735 0.5 0.277785
-v 0.461940 -0.500000 0.191341
+v 0.415735 -0.5 0.277785
-v 0.461940 0.500000 0.191341
+v 0.353553 0.5 0.353553
-v 0.415735 -0.500000 0.277785
+v 0.353553 -0.5 0.353553
-v 0.415735 0.500000 0.277785
+v 0.277785 0.5 0.415735
-v 0.353553 -0.500000 0.353553
+v 0.277785 -0.5 0.415735
-v 0.353553 0.500000 0.353553
+v 0.191342 0.5 0.46194
-v 0.277785 -0.500000 0.415735
+v 0.191342 -0.5 0.46194
-v 0.277785 0.500000 0.415735
+v 0.097545 0.5 0.490392
-v 0.191342 -0.500000 0.461940
+v 0.097545 -0.5 0.490392
-v 0.191342 0.500000 0.461940
+v 0 0.5 0.5
-v 0.097545 -0.500000 0.490392
+v 0 -0.5 0.5
-v 0.097545 0.500000 0.490392
+v -0.097545 0.5 0.490392
-v -0.000000 -0.500000 0.500000
+v -0.097545 -0.5 0.490392
-v -0.000000 0.500000 0.500000
+v -0.191342 0.5 0.461939
-v -0.097545 -0.500000 0.490392
+v -0.191342 -0.5 0.461939
-v -0.097545 0.500000 0.490392
+v -0.277785 0.5 0.415734
-v -0.191342 -0.500000 0.461939
+v -0.277785 -0.5 0.415734
-v -0.191342 0.500000 0.461939
+v -0.353554 0.5 0.353553
-v -0.277785 -0.500000 0.415734
+v -0.353554 -0.5 0.353553
-v -0.277785 0.500000 0.415734
+v -0.415735 0.5 0.277785
-v -0.353554 -0.500000 0.353553
+v -0.415735 -0.5 0.277785
-v -0.353554 0.500000 0.353553
+v -0.46194 0.5 0.191341
-v -0.415735 -0.500000 0.277785
+v -0.46194 -0.5 0.191341
-v -0.415735 0.500000 0.277785
+v -0.490393 0.5 0.097545
-v -0.461940 -0.500000 0.191341
+v -0.490393 -0.5 0.097545
-v -0.461940 0.500000 0.191341
+v -0.5 0.5 -0.000001
-v -0.490393 -0.500000 0.097545
+v -0.5 -0.5 -0.000001
-v -0.490393 0.500000 0.097545
+v -0.490393 0.5 -0.097546
-v -0.500000 -0.500000 -0.000001
+v -0.490393 -0.5 -0.097546
-v -0.500000 0.500000 -0.000001
+v -0.46194 0.5 -0.191342
-v -0.490393 -0.500000 -0.097546
+v -0.46194 -0.5 -0.191342
-v -0.490393 0.500000 -0.097546
+v -0.415734 0.5 -0.277786
-v -0.461940 -0.500000 -0.191342
+v -0.415734 -0.5 -0.277786
-v -0.461940 0.500000 -0.191342
+v -0.353553 0.5 -0.353554
-v -0.415734 -0.500000 -0.277786
+v -0.353553 -0.5 -0.353554
-v -0.415734 0.500000 -0.277786
+v -0.277785 0.5 -0.415735
-v -0.353553 -0.500000 -0.353554
+v -0.277785 -0.5 -0.415735
-v -0.353553 0.500000 -0.353554
+v -0.191341 0.5 -0.46194
-v -0.277785 -0.500000 -0.415735
+v -0.191341 -0.5 -0.46194
-v -0.277785 0.500000 -0.415735
+v -0.097544 0.5 -0.490393
-v -0.191341 -0.500000 -0.461940
+v -0.097544 -0.5 -0.490393
-v -0.191341 0.500000 -0.461940
+vn 0 0 -1
-v -0.097544 -0.500000 -0.490393
+vn 0.1951 0 -0.9808
-v -0.097544 0.500000 -0.490393
+vn 0.3827 0 -0.9239
-vt 0.499996 0.999997
+vn 0.5556 0 -0.8315
-vt 0.499995 0.000005
+vn 0.7071 0 -0.7071
-vt 0.562495 0.000004
+vn 0.8315 0 -0.5556
-vt 0.562496 0.999997
+vn 0.9239 0 -0.3827
-vt 0.624995 0.000003
+vn 0.9808 0 -0.1951
-vt 0.624997 0.999997
+vn 1 0 0
-vt 0.687496 0.000002
+vn 0.9808 0 0.1951
-vt 0.687497 0.999998
+vn 0.9239 0 0.3827
-vt 0.749997 0.000001
+vn 0.8315 0 0.5556
-vt 0.749997 0.999998
+vn 0.7071 0 0.7071
-vt 0.812497 0.000001
+vn 0.5556 0 0.8315
-vt 0.812497 0.999998
+vn 0.3827 0 0.9239
-vt 0.874997 -0.000000
+vn 0.1951 0 0.9808
-vt 0.874997 0.999998
+vn 0 0 1
-vt 0.937498 -0.000000
+vn -0.1951 0 0.9808
-vt 0.937498 0.999998
+vn -0.3827 0 0.9239
-vt 0.999998 -0.000000
+vn -0.5556 0 0.8315
-vt 0.999998 0.999998
+vn -0.7071 0 0.7071
-vt 0.000005 0.999997
+vn -0.8315 0 0.5556
-vt 0.000001 0.000024
+vn -0.9239 0 0.3827
-vt 0.062500 0.000023
+vn -0.9808 0 0.1951
-vt 0.062505 0.999996
+vn -1 0 0
-vt 0.124999 0.000021
+vn -0.9808 0 -0.1951
-vt 0.125004 0.999996
+vn -0.9239 0 -0.3827
-vt 0.187498 0.000020
+vn -0.8315 0 -0.5556
-vt 0.187503 0.999995
+vn -0.7071 0 -0.7071
-vt 0.249997 0.000018
+vn -0.5556 0 -0.8315
-vt 0.250003 0.999994
+vn -0.3827 0 -0.9239
-vt 0.312497 0.000017
+vn 0 1 0
-vt 0.312502 0.999994
+vn -0.1951 0 -0.9808
-vt 0.374997 0.000015
+vn 0 -1 0
-vt 0.375002 0.999993
+vt 0.500003 0.000001
-vt 0.437496 0.000014
+vt 0.500004 0.999993
-vt 0.437501 0.999993
+vt 0.437504 0.999994
-vt 0.402487 0.009601
+vt 0.437503 0.000001
-vt 0.597576 0.009614
+vt 0.375004 0.999995
-vt 0.691371 0.038072
+vt 0.375002 0.000001
-vt 0.777811 0.084282
+vt 0.312503 0.999996
-vt 0.853576 0.146469
+vt 0.312502 0
-vt 0.915753 0.222242
+vt 0.250002 0.999997
-vt 0.961953 0.308689
+vt 0.250002 0
-vt 0.990399 0.402487
+vt 0.187502 0.999997
-vt 1.000000 0.500033
+vt 0.187502 0
-vt 0.990386 0.597577
+vt 0.125002 0.999998
-vt 0.961928 0.691370
+vt 0.125002 0
-vt 0.915717 0.777811
+vt 0.062501 0.999998
-vt 0.853531 0.853575
+vt 0.062501 0
-vt 0.777758 0.915753
+vt 0.000001 0.999998
-vt 0.691312 0.961952
+vt 0.000001 0
-vt 0.597514 0.990398
+vt 0.999994 0.000001
-vt 0.402424 0.990386
+vt 0.999998 0.999974
-vt 0.308630 0.961928
+vt 0.937499 0.999975
-vt 0.222188 0.915717
+vt 0.937494 0.000002
-vt 0.146424 0.853531
+vt 0.875 0.999977
+vt 0.874995 0.000002
+vt 0.812501 0.999978
+vt 0.812496 0.000003
+vt 0.750002 0.99998
+vt 0.749996 0.000004
+vt 0.687502 0.999981
+vt 0.687497 0.000004
+vt 0.625002 0.999983
+vt 0.624997 0.000005
+vt 0.562503 0.999984
+vt 0.562498 0.000005
+vt 0.9904 0.402488
+vt 0.999996 0.499996
+vt 0.990387 0.597577
+vt 0.961929 0.691372
+vt 0.915719 0.777812
+vt 0.853532 0.853577
+vt 0.777759 0.915754
+vt 0.691312 0.961954
+vt 0.597514 0.9904
+vt 0.402424 0.990387
+vt 0.308631 0.961929
+vt 0.22219 0.915718
+vt 0.146426 0.853532
 vt 0.084248 0.777759
 vt 0.038049 0.691313
-vt 0.009602 0.597515
+vt 0.009603 0.597515
-vt 0.000000 0.499970
+vt 0.000004 0.499997
-vt 0.009614 0.402425
+vt 0.009615 0.402425
-vt 0.038073 0.308630
+vt 0.038073 0.308631
-vt 0.084283 0.222189
+vt 0.084284 0.222189
-vt 0.146470 0.146424
+vt 0.14647 0.146425
-vt 0.222243 0.084248
+vt 0.222242 0.084249
-vt 0.308689 0.038048
+vt 0.308688 0.03805
-vt 0.499927 0.999999
+vt 0.402486 0.009603
-vt 0.084226 0.777725
+vt 0.597576 0.009615
-vt 0.000000 0.499927
+vt 0.691371 0.038074
-vt 0.222277 0.084224
+vt 0.777812 0.084284
-vt 0.500074 0.000000
+vt 0.853577 0.146471
-vt 0.915777 0.222279
+vt 0.915753 0.222244
-vt 1.000000 0.500077
+vt 0.961953 0.30869
-vt 0.777724 0.915775
+vt 0.500073 0
-vn 0.000000 -0.685700 -0.727900
+vt 0.915774 0.222274
-vn 0.000000 0.685700 -0.727900
+vt 1 0.500072
-vn 0.142000 0.685700 -0.713900
+vt 0.777723 0.915775
-vn 0.142000 -0.685700 -0.713900
+vt 0.499926 0.999999
-vn 0.278500 0.685700 -0.672500
+vt 0.084223 0.77772
-vn 0.278500 -0.685700 -0.672500
+vt 0 0.499922
-vn 0.404400 0.685700 -0.605200
+vt 0.222276 0.084224
-vn 0.404400 -0.685700 -0.605200
-vn 0.514700 0.685700 -0.514700
-vn 0.514700 -0.685700 -0.514700
-vn 0.605200 0.685700 -0.404400
-vn 0.605200 -0.685700 -0.404400
-vn 0.672500 0.685700 -0.278500
-vn 0.672500 -0.685700 -0.278500
-vn 0.713900 0.685700 -0.142000
-vn 0.713900 -0.685700 -0.142000
-vn 0.727900 0.685700 0.000000
-vn 0.727900 -0.685700 0.000000
-vn 0.713900 0.685700 0.142000
-vn 0.713900 -0.685700 0.142000
-vn 0.672500 0.685700 0.278500
-vn 0.672500 -0.685700 0.278500
-vn 0.605200 0.685700 0.404400
-vn 0.605200 -0.685700 0.404400
-vn 0.514700 0.685700 0.514700
-vn 0.514700 -0.685700 0.514700
-vn 0.404400 0.685700 0.605200
-vn 0.404400 -0.685700 0.605200
-vn 0.278500 0.685700 0.672500
-vn 0.278500 -0.685700 0.672500
-vn 0.142000 0.685700 0.713900
-vn 0.142000 -0.685700 0.713900
-vn 0.000000 0.685700 0.727900
-vn 0.000000 -0.685700 0.727900
-vn -0.142000 0.685700 0.713900
-vn -0.142000 -0.685700 0.713900
-vn -0.278500 0.685700 0.672500
-vn -0.278500 -0.685700 0.672500
-vn -0.404400 0.685700 0.605200
-vn -0.404400 -0.685700 0.605200
-vn -0.514700 0.685700 0.514700
-vn -0.514700 -0.685700 0.514700
-vn -0.605200 0.685700 0.404400
-vn -0.605200 -0.685700 0.404400
-vn -0.672500 0.685700 0.278500
-vn -0.672500 -0.685700 0.278500
-vn -0.713900 0.685700 0.142000
-vn -0.713900 -0.685700 0.142000
-vn -0.727900 0.685700 0.000000
-vn -0.727900 -0.685700 0.000000
-vn -0.713900 0.685700 -0.142000
-vn -0.713900 -0.685700 -0.142000
-vn -0.672500 0.685700 -0.278500
-vn -0.672500 -0.685700 -0.278500
-vn -0.605200 0.685700 -0.404400
-vn -0.605200 -0.685700 -0.404400
-vn -0.514700 0.685700 -0.514700
-vn -0.514700 -0.685700 -0.514700
-vn -0.404400 0.685700 -0.605200
-vn -0.404400 -0.685700 -0.605200
-vn -0.278500 0.685700 -0.672500
-vn -0.278500 -0.685700 -0.672500
-vn -0.142000 0.685700 -0.713900
-vn -0.142000 -0.685700 -0.713900
 s 1
-f 1/1/1 2/2/2 4/3/3 3/4/4
+f 1/1/1 2/2/1 3/3/2 4/4/2
-f 3/4/4 4/3/3 6/5/5 5/6/6
+f 4/4/2 3/3/2 5/5/3 6/6/3
-f 5/6/6 6/5/5 8/7/7 7/8/8
+f 6/6/3 5/5/3 7/7/4 8/8/4
-f 7/8/8 8/7/7 10/9/9 9/10/10
+f 8/8/4 7/7/4 9/9/5 10/10/5
-f 9/10/10 10/9/9 12/11/11 11/12/12
+f 10/10/5 9/9/5 11/11/6 12/12/6
-f 11/12/12 12/11/11 14/13/13 13/14/14
+f 12/12/6 11/11/6 13/13/7 14/14/7
-f 13/14/14 14/13/13 16/15/15 15/16/16
+f 14/14/7 13/13/7 15/15/8 16/16/8
-f 15/16/16 16/15/15 18/17/17 17/18/18
+f 16/16/8 15/15/8 17/17/9 18/18/9
-f 17/19/18 18/20/17 20/21/19 19/22/20
+f 18/19/9 17/20/9 19/21/10 20/22/10
-f 19/22/20 20/21/19 22/23/21 21/24/22
+f 20/22/10 19/21/10 21/23/11 22/24/11
-f 21/24/22 22/23/21 24/25/23 23/26/24
+f 22/24/11 21/23/11 23/25/12 24/26/12
-f 23/26/24 24/25/23 26/27/25 25/28/26
+f 24/26/12 23/25/12 25/27/13 26/28/13
-f 25/28/26 26/27/25 28/29/27 27/30/28
+f 26/28/13 25/27/13 27/29/14 28/30/14
-f 27/30/28 28/29/27 30/31/29 29/32/30
+f 28/30/14 27/29/14 29/31/15 30/32/15
-f 29/32/30 30/31/29 32/33/31 31/34/32
+f 30/32/15 29/31/15 31/33/16 32/34/16
-f 31/34/32 32/33/31 34/2/33 33/1/34
+f 32/34/16 31/33/16 33/2/17 34/1/17
-f 33/1/34 34/2/33 36/3/35 35/4/36
+f 34/1/17 33/2/17 35/3/18 36/4/18
-f 35/4/36 36/3/35 38/5/37 37/6/38
+f 36/4/18 35/3/18 37/5/19 38/6/19
-f 37/6/38 38/5/37 40/7/39 39/8/40
+f 38/6/19 37/5/19 39/7/20 40/8/20
-f 39/8/40 40/7/39 42/9/41 41/10/42
+f 40/8/20 39/7/20 41/9/21 42/10/21
-f 41/10/42 42/9/41 44/11/43 43/12/44
+f 42/10/21 41/9/21 43/11/22 44/12/22
-f 43/12/44 44/11/43 46/13/45 45/14/46
+f 44/12/22 43/11/22 45/13/23 46/14/23
-f 45/14/46 46/13/45 48/15/47 47/16/48
+f 46/14/23 45/13/23 47/15/24 48/16/24
-f 47/16/48 48/15/47 50/17/49 49/18/50
+f 48/16/24 47/15/24 49/17/25 50/18/25
-f 49/19/50 50/20/49 52/21/51 51/22/52
+f 50/19/25 49/20/25 51/21/26 52/22/26
-f 51/22/52 52/21/51 54/23/53 53/24/54
+f 52/22/26 51/21/26 53/23/27 54/24/27
-f 53/24/54 54/23/53 56/25/55 55/26/56
+f 54/24/27 53/23/27 55/25/28 56/26/28
-f 55/26/56 56/25/55 58/27/57 57/28/58
+f 56/26/28 55/25/28 57/27/29 58/28/29
-f 57/28/58 58/27/57 60/29/59 59/30/60
+f 58/28/29 57/27/29 59/29/30 60/30/30
-f 59/30/60 60/29/59 62/31/61 61/32/62
+f 60/30/30 59/29/30 61/31/31 62/32/31
-f 4/35/3 2/2/2 64/36/63 62/37/61 60/38/59 58/39/57 56/40/55 54/41/53 52/42/51 50/43/49 48/44/47 46/45/45 44/46/43 42/47/41 40/48/39 38/49/37 36/50/35 34/1/33 32/51/31 30/52/29 28/53/27 26/54/25 24/55/23 22/56/21 20/57/19 18/58/17 16/59/15 14/60/13 12/61/11 10/62/9 8/63/7 6/64/5
+f 3/35/32 2/36/32 63/37/32 61/38/32 59/39/32 57/40/32 55/41/32 53/42/32 51/43/32 49/2/32 47/44/32 45/45/32 43/46/32 41/47/32 39/48/32 37/49/32 35/50/32 33/51/32 31/52/32 29/53/32 27/54/32 25/55/32 23/56/32 21/57/32 19/58/32 17/1/32 15/59/32 13/60/32 11/61/32 9/62/32 7/63/32 5/64/32
-f 63/34/64 64/33/63 2/2/2 1/1/1
+f 64/34/33 63/33/33 2/2/1 1/1/1
-f 61/32/62 62/31/61 64/33/63 63/34/64
+f 62/32/31 61/31/31 63/33/33 64/34/33
-f 1/65/1 3/51/4 5/52/6 7/53/8 9/54/10 11/66/12 13/56/14 15/57/16 17/67/18 19/59/20 21/60/22 23/61/24 25/62/26 27/68/28 29/64/30 31/35/32 33/69/34 35/36/36 37/37/38 39/38/40 41/39/42 43/70/44 45/41/46 47/42/48 49/71/50 51/44/52 53/45/54 55/46/56 57/47/58 59/72/60 61/49/62 63/50/64
+f 1/65/34 4/59/34 6/60/34 8/61/34 10/62/34 12/66/34 14/64/34 16/35/34 18/67/34 20/37/34 22/38/34 24/39/34 26/40/34 28/68/34 30/42/34 32/43/34 34/69/34 36/44/34 38/45/34 40/46/34 42/47/34 44/70/34 46/49/34 48/50/34 50/71/34 52/52/34 54/53/34 56/54/34 58/55/34 60/72/34 62/57/34 64/58/34

technic_cnc/models/technic_cnc_cylinder_horizontal.obj

@@ -1,70 +1,101 @@
-# Blender v2.73 (sub 0) OBJ File: 'technic-cylinder-horizontal.blend'
+v 0.5 0 -0.5
-# www.blender.org
+v -0.5 0 -0.5
-o Cylinder_Cylinder.001
+v 0.5 0.097545 -0.490393
-v 0.500000 0.000000 -0.500000
+v -0.5 0.097545 -0.490393
-v -0.500000 0.000000 -0.500000
+v 0.5 0.191342 -0.46194
-v 0.500000 0.097545 -0.490393
+v -0.5 0.191342 -0.46194
-v -0.500000 0.097545 -0.490393
+v 0.5 0.277785 -0.415735
-v 0.500000 0.191342 -0.461940
+v -0.5 0.277785 -0.415735
-v -0.500000 0.191342 -0.461940
+v 0.5 0.353553 -0.353553
-v 0.500000 0.277785 -0.415735
+v -0.5 0.353553 -0.353554
-v -0.500000 0.277785 -0.415735
+v 0.5 0.415735 -0.277785
-v 0.500000 0.353553 -0.353553
+v -0.5 0.415735 -0.277785
-v -0.500000 0.353553 -0.353554
+v 0.5 0.46194 -0.191342
-v 0.500000 0.415735 -0.277785
+v -0.5 0.46194 -0.191342
-v -0.500000 0.415735 -0.277785
+v 0.5 0.490393 -0.097545
-v 0.500000 0.461940 -0.191342
+v -0.5 0.490393 -0.097545
-v -0.500000 0.461940 -0.191342
+v 0.5 0.5 0
-v 0.500000 0.490393 -0.097545
+v -0.5 0.5 0
-v -0.500000 0.490393 -0.097545
+v 0.5 0.490393 0.097545
-v 0.500000 0.500000 -0.000000
+v -0.5 0.490393 0.097545
-v -0.500000 0.500000 -0.000000
+v 0.5 0.46194 0.191342
-v 0.500000 0.490393 0.097545
+v -0.5 0.46194 0.191341
-v -0.500000 0.490393 0.097545
+v 0.5 0.415735 0.277785
-v 0.500000 0.461940 0.191342
+v -0.5 0.415735 0.277785
-v -0.500000 0.461940 0.191341
+v 0.5 0.353553 0.353553
-v 0.500000 0.415735 0.277785
+v -0.5 0.353553 0.353553
-v -0.500000 0.415735 0.277785
+v 0.5 0.277785 0.415735
-v 0.500000 0.353553 0.353553
+v -0.5 0.277785 0.415735
-v -0.500000 0.353553 0.353553
+v 0.5 0.191342 0.46194
-v 0.500000 0.277785 0.415735
+v -0.5 0.191342 0.46194
-v -0.500000 0.277785 0.415735
+v 0.5 0.097545 0.490393
-v 0.500000 0.191342 0.461940
+v -0.5 0.097545 0.490392
-v -0.500000 0.191342 0.461940
+v 0.5 0 0.5
-v 0.500000 0.097545 0.490393
+v -0.5 0 0.5
-v -0.500000 0.097545 0.490392
+v 0.5 -0.097546 0.490392
-v 0.500000 -0.000000 0.500000
+v -0.5 -0.097545 0.490392
-v -0.500000 -0.000000 0.500000
+v 0.5 -0.191342 0.46194
-v 0.500000 -0.097546 0.490392
+v -0.5 -0.191342 0.461939
-v -0.500000 -0.097545 0.490392
+v 0.5 -0.277785 0.415734
-v 0.500000 -0.191342 0.461940
+v -0.5 -0.277785 0.415734
-v -0.500000 -0.191342 0.461939
+v 0.5 -0.353554 0.353553
-v 0.500000 -0.277785 0.415734
+v -0.5 -0.353554 0.353553
-v -0.500000 -0.277785 0.415734
+v 0.5 -0.415735 0.277785
-v 0.500000 -0.353554 0.353553
+v -0.5 -0.415735 0.277785
-v -0.500000 -0.353554 0.353553
+v 0.5 -0.46194 0.191341
-v 0.500000 -0.415735 0.277785
+v -0.5 -0.46194 0.191341
-v -0.500000 -0.415735 0.277785
+v 0.5 -0.490393 0.097545
-v 0.500000 -0.461940 0.191341
+v -0.5 -0.490393 0.097544
-v -0.500000 -0.461940 0.191341
+v 0.5 -0.5 -0.000001
-v 0.500000 -0.490393 0.097545
+v -0.5 -0.5 -0.000001
-v -0.500000 -0.490393 0.097544
+v 0.5 -0.490393 -0.097546
-v 0.500000 -0.500000 -0.000001
+v -0.5 -0.490393 -0.097546
-v -0.500000 -0.500000 -0.000001
+v 0.5 -0.46194 -0.191342
-v 0.500000 -0.490393 -0.097546
+v -0.5 -0.46194 -0.191343
-v -0.500000 -0.490393 -0.097546
+v 0.5 -0.415734 -0.277786
-v 0.500000 -0.461940 -0.191342
+v -0.5 -0.415734 -0.277786
-v -0.500000 -0.461940 -0.191343
+v 0.5 -0.353553 -0.353554
-v 0.500000 -0.415734 -0.277786
+v -0.5 -0.353553 -0.353554
-v -0.500000 -0.415734 -0.277786
+v 0.5 -0.277785 -0.415735
-v 0.500000 -0.353553 -0.353554
+v -0.5 -0.277784 -0.415735
-v -0.500000 -0.353553 -0.353554
+v 0.5 -0.191341 -0.46194
-v 0.500000 -0.277785 -0.415735
+v -0.5 -0.191341 -0.46194
-v -0.500000 -0.277784 -0.415735
+v 0.5 -0.097544 -0.490393
-v 0.500000 -0.191341 -0.461940
+v -0.5 -0.097544 -0.490393
-v -0.500000 -0.191341 -0.461940
+vn 0 0 -1
-v 0.500000 -0.097544 -0.490393
+vn 0 0.1951 -0.9808
-v -0.500000 -0.097544 -0.490393
+vn 0 0.3827 -0.9239
+vn 0 0.5556 -0.8315
+vn 0 0.7071 -0.7071
+vn 0 0.8315 -0.5556
+vn 0 0.9239 -0.3827
+vn 0 0.9808 -0.1951
+vn 0 1 0
+vn 0 0.9808 0.1951
+vn 0 0.9239 0.3827
+vn 0 0.8315 0.5556
+vn 0 0.7071 0.7071
+vn 0 0.5556 0.8315
+vn 0 0.3827 0.9239
+vn 0 0.1951 0.9808
+vn 0 0 1
+vn 0 -0.1951 0.9808
+vn 0 -0.3827 0.9239
+vn 0 -0.5556 0.8315
+vn 0 -0.7071 0.7071
+vn 0 -0.8315 0.5556
+vn 0 -0.9239 0.3827
+vn 0 -0.9808 0.1951
+vn 0 -1 0
+vn 0 -0.9808 -0.1951
+vn 0 -0.9239 -0.3827
+vn 0 -0.8315 -0.5556
+vn 0 -0.7071 -0.7071
+vn 0 -0.5556 -0.8315
+vn 0 -0.3827 -0.9239
+vn -1 0 0
+vn 0 -0.1951 -0.9808
+vn 1 0 0
 vt 0.000003 0.499996
 vt 0.999995 0.499995
 vt 0.999996 0.562495
@@ -77,19 +108,19 @@ vt 0.999999 0.749997
 vt 0.000002 0.749996
 vt 0.999999 0.812497
 vt 0.000002 0.812497
-vt 1.000000 0.874997
+vt 1 0.874997
 vt 0.000001 0.874997
-vt 1.000000 0.937498
+vt 1 0.937498
 vt 0.000001 0.937497
-vt 1.000000 0.999998
+vt 1 0.999998
 vt 0.000001 0.999998
 vt 0.000003 0.000005
 vt 0.999976 0.000001
-vt 0.999977 0.062500
+vt 0.999977 0.0625
 vt 0.000003 0.062505
 vt 0.999978 0.124999
 vt 0.000004 0.125004
-vt 0.999980 0.187498
+vt 0.99998 0.187498
 vt 0.000005 0.187503
 vt 0.999982 0.249997
 vt 0.000005 0.250003
@@ -107,7 +138,7 @@ vt 0.146469 0.146424
 vt 0.222242 0.084247
 vt 0.308689 0.038047
 vt 0.402487 0.009601
-vt 0.500033 -0.000000
+vt 0.500033 0
 vt 0.597577 0.009613
 vt 0.691371 0.038072
 vt 0.777811 0.084283
@@ -116,123 +147,59 @@ vt 0.915753 0.222242
 vt 0.961952 0.308688
 vt 0.990398 0.402486
 vt 0.990386 0.597576
-vt 0.961928 0.691370
+vt 0.961928 0.69137
 vt 0.915717 0.777812
 vt 0.853531 0.853576
 vt 0.777759 0.915752
 vt 0.691313 0.961951
 vt 0.597515 0.990398
-vt 0.499970 1.000000
+vt 0.49997 1
 vt 0.402425 0.990386
-vt 0.308630 0.961927
+vt 0.30863 0.961927
 vt 0.222189 0.915717
-vt 0.146424 0.853530
+vt 0.146424 0.85353
 vt 0.084248 0.777757
 vt 0.038048 0.691311
 vt 0.999999 0.500073
 vt 0.777724 0.915774
 vt 0.499927 0.999999
 vt 0.084224 0.777723
-vt 0.000000 0.499925
+vt 0 0.499925
 vt 0.222279 0.084223
-vt 0.500078 -0.000000
+vt 0.500078 0
 vt 0.915775 0.222276
-vn 0.685700 0.000000 -0.727900
-vn -0.685700 0.000000 -0.727900
-vn -0.685700 0.142000 -0.713900
-vn 0.685700 0.142000 -0.713900
-vn -0.685700 0.278500 -0.672500
-vn 0.685700 0.278500 -0.672500
-vn -0.685700 0.404400 -0.605200
-vn 0.685700 0.404400 -0.605200
-vn -0.685700 0.514700 -0.514700
-vn 0.685700 0.514700 -0.514700
-vn -0.685700 0.605200 -0.404400
-vn 0.685700 0.605200 -0.404400
-vn -0.685700 0.672500 -0.278500
-vn 0.685700 0.672500 -0.278500
-vn -0.685700 0.713900 -0.142000
-vn 0.685700 0.713900 -0.142000
-vn -0.685700 0.727900 0.000000
-vn 0.685700 0.727900 0.000000
-vn -0.685700 0.713900 0.142000
-vn 0.685700 0.713900 0.142000
-vn -0.685700 0.672500 0.278500
-vn 0.685700 0.672500 0.278500
-vn -0.685700 0.605200 0.404400
-vn 0.685700 0.605200 0.404400
-vn -0.685700 0.514700 0.514700
-vn 0.685700 0.514700 0.514700
-vn -0.685700 0.404400 0.605200
-vn 0.685700 0.404400 0.605200
-vn -0.685700 0.278500 0.672500
-vn 0.685700 0.278500 0.672500
-vn -0.685700 0.142000 0.713900
-vn 0.685700 0.142000 0.713900
-vn -0.685700 0.000000 0.727900
-vn 0.685700 0.000000 0.727900
-vn -0.685700 -0.142000 0.713900
-vn 0.685700 -0.142000 0.713900
-vn -0.685700 -0.278500 0.672500
-vn 0.685700 -0.278500 0.672500
-vn -0.685700 -0.404400 0.605200
-vn 0.685700 -0.404400 0.605200
-vn -0.685700 -0.514700 0.514700
-vn 0.685700 -0.514700 0.514700
-vn -0.685700 -0.605200 0.404400
-vn 0.685700 -0.605200 0.404400
-vn -0.685700 -0.672500 0.278500
-vn 0.685700 -0.672500 0.278500
-vn -0.685700 -0.713900 0.142000
-vn 0.685700 -0.713900 0.142000
-vn -0.685700 -0.727900 0.000000
-vn 0.685700 -0.727900 0.000000
-vn -0.685700 -0.713900 -0.142000
-vn 0.685700 -0.713900 -0.142000
-vn -0.685700 -0.672500 -0.278500
-vn 0.685700 -0.672500 -0.278500
-vn -0.685700 -0.605200 -0.404400
-vn 0.685700 -0.605200 -0.404400
-vn -0.685700 -0.514700 -0.514700
-vn 0.685700 -0.514700 -0.514700
-vn -0.685700 -0.404400 -0.605200
-vn 0.685700 -0.404400 -0.605200
-vn -0.685700 -0.278500 -0.672500
-vn 0.685700 -0.278500 -0.672500
-vn -0.685700 -0.142000 -0.713900
-vn 0.685700 -0.142000 -0.713900
 s 1
-f 1/1/1 2/2/2 4/3/3 3/4/4
+f 1/1/1 2/2/1 4/3/2 3/4/2
-f 3/4/4 4/3/3 6/5/5 5/6/6
+f 3/4/2 4/3/2 6/5/3 5/6/3
-f 5/6/6 6/5/5 8/7/7 7/8/8
+f 5/6/3 6/5/3 8/7/4 7/8/4
-f 7/8/8 8/7/7 10/9/9 9/10/10
+f 7/8/4 8/7/4 10/9/5 9/10/5
-f 9/10/10 10/9/9 12/11/11 11/12/12
+f 9/10/5 10/9/5 12/11/6 11/12/6
-f 11/12/12 12/11/11 14/13/13 13/14/14
+f 11/12/6 12/11/6 14/13/7 13/14/7
-f 13/14/14 14/13/13 16/15/15 15/16/16
+f 13/14/7 14/13/7 16/15/8 15/16/8
-f 15/16/16 16/15/15 18/17/17 17/18/18
+f 15/16/8 16/15/8 18/17/9 17/18/9
-f 17/19/18 18/20/17 20/21/19 19/22/20
+f 17/19/9 18/20/9 20/21/10 19/22/10
-f 19/22/20 20/21/19 22/23/21 21/24/22
+f 19/22/10 20/21/10 22/23/11 21/24/11
-f 21/24/22 22/23/21 24/25/23 23/26/24
+f 21/24/11 22/23/11 24/25/12 23/26/12
-f 23/26/24 24/25/23 26/27/25 25/28/26
+f 23/26/12 24/25/12 26/27/13 25/28/13
-f 25/28/26 26/27/25 28/29/27 27/30/28
+f 25/28/13 26/27/13 28/29/14 27/30/14
-f 27/30/28 28/29/27 30/31/29 29/32/30
+f 27/30/14 28/29/14 30/31/15 29/32/15
-f 29/32/30 30/31/29 32/33/31 31/34/32
+f 29/32/15 30/31/15 32/33/16 31/34/16
-f 31/34/32 32/33/31 34/2/33 33/1/34
+f 31/34/16 32/33/16 34/2/17 33/1/17
-f 33/1/34 34/2/33 36/3/35 35/4/36
+f 33/1/17 34/2/17 36/3/18 35/4/18
-f 35/4/36 36/3/35 38/5/37 37/6/38
+f 35/4/18 36/3/18 38/5/19 37/6/19
-f 37/6/38 38/5/37 40/7/39 39/8/40
+f 37/6/19 38/5/19 40/7/20 39/8/20
-f 39/8/40 40/7/39 42/9/41 41/10/42
+f 39/8/20 40/7/20 42/9/21 41/10/21
-f 41/10/42 42/9/41 44/11/43 43/12/44
+f 41/10/21 42/9/21 44/11/22 43/12/22
-f 43/12/44 44/11/43 46/13/45 45/14/46
+f 43/12/22 44/11/22 46/13/23 45/14/23
-f 45/14/46 46/13/45 48/15/47 47/16/48
+f 45/14/23 46/13/23 48/15/24 47/16/24
-f 47/16/48 48/15/47 50/17/49 49/18/50
+f 47/16/24 48/15/24 50/17/25 49/18/25
-f 49/19/50 50/20/49 52/21/51 51/22/52
+f 49/19/25 50/20/25 52/21/26 51/22/26
-f 51/22/52 52/21/51 54/23/53 53/24/54
+f 51/22/26 52/21/26 54/23/27 53/24/27
-f 53/24/54 54/23/53 56/25/55 55/26/56
+f 53/24/27 54/23/27 56/25/28 55/26/28
-f 55/26/56 56/25/55 58/27/57 57/28/58
+f 55/26/28 56/25/28 58/27/29 57/28/29
-f 57/28/58 58/27/57 60/29/59 59/30/60
+f 57/28/29 58/27/29 60/29/30 59/30/30
-f 59/30/60 60/29/59 62/31/61 61/32/62
+f 59/30/30 60/29/30 62/31/31 61/32/31
-f 4/35/3 2/1/2 64/36/63 62/37/61 60/38/59 58/39/57 56/40/55 54/41/53 52/42/51 50/43/49 48/44/47 46/45/45 44/46/43 42/47/41 40/48/39 38/49/37 36/50/35 34/2/33 32/51/31 30/52/29 28/53/27 26/54/25 24/55/23 22/56/21 20/57/19 18/58/17 16/59/15 14/60/13 12/61/11 10/62/9 8/63/7 6/64/5
+f 4/35/32 2/1/32 64/36/32 62/37/32 60/38/32 58/39/32 56/40/32 54/41/32 52/42/32 50/43/32 48/44/32 46/45/32 44/46/32 42/47/32 40/48/32 38/49/32 36/50/32 34/2/32 32/51/32 30/52/32 28/53/32 26/54/32 24/55/32 22/56/32 20/57/32 18/58/32 16/59/32 14/60/32 12/61/32 10/62/32 8/63/32 6/64/32
-f 63/34/64 64/33/63 2/2/2 1/1/1
+f 63/34/33 64/33/33 2/2/1 1/1/1
-f 61/32/62 62/31/61 64/33/63 63/34/64
+f 61/32/31 62/31/31 64/33/33 63/34/33
-f 1/65/1 3/51/4 5/52/6 7/53/8 9/54/10 11/66/12 13/56/14 15/57/16 17/67/18 19/59/20 21/60/22 23/61/24 25/62/26 27/68/28 29/64/30 31/35/32 33/69/34 35/36/36 37/37/38 39/38/40 41/39/42 43/70/44 45/41/46 47/42/48 49/71/50 51/44/52 53/45/54 55/46/56 57/47/58 59/72/60 61/49/62 63/50/64
+f 1/65/34 3/51/34 5/52/34 7/53/34 9/54/34 11/66/34 13/56/34 15/57/34 17/67/34 19/59/34 21/60/34 23/61/34 25/62/34 27/68/34 29/64/34 31/35/34 33/69/34 35/36/34 37/37/34 39/38/34 41/39/34 43/70/34 45/41/34 47/42/34 49/71/34 51/44/34 53/45/34 55/46/34 57/47/34 59/72/34 61/49/34 63/50/34

technic_cnc/models/technic_cnc_innercorner.obj

@@ -1,27 +1,24 @@
-# Blender v2.73 (sub 0) OBJ File: 'technic-icorner.blend'
+v -0.5 0.5 0.5
-# www.blender.org
+v -0.5 0.5 -0.5
-o Cube_Cube.000
+v -0.5 -0.5 -0.5
-v -0.500000 0.500000 0.500000
+v -0.5 -0.5 0.5
-v -0.500000 0.500000 -0.500000
+v 0.5 -0.5 -0.5
-v -0.500000 -0.500000 -0.500000
+v 0.5 0.5 0.5
-v -0.500000 -0.500000 0.500000
+v -0.5 -0.5 0.5
-v 0.500000 -0.500000 -0.500000
+v 0.5 -0.5 0.5
-v 0.500000 0.500000 0.500000
+v 0.5 -0.5 -0.5
-v -0.500000 -0.500000 0.500000
+vn 0 0 1
-v 0.500000 -0.500000 0.500000
+vn 0 0 -1
-v 0.500000 -0.500000 -0.500000
+vn 0.7071 0.7071 0
-vt 1.000000 1.000000
+vn 1 0 0
-vt 0.000000 1.000000
+vn 0 -1 0
-vt 0.000000 0.000000
+vn -1 0 0
-vt 1.000000 0.000000
+vn 0 0.7071 -0.7071
-vn -0.000000 -0.000000 1.000000
+vt 1 1
-vn -0.000000 -0.000000 -1.000000
+vt 0 1
-vn 0.707100 0.707100 -0.000000
+vt 0 0
-vn 1.000000 0.000000 -0.000000
+vt 1 0
-vn 0.000000 -1.000000 -0.000000
+s 0
-vn -1.000000 -0.000000 -0.000000
-vn 0.000000 0.707100 -0.707100
-s off
 f 6/1/1 1/2/1 7/3/1 8/4/1
 f 2/1/2 5/3/2 3/4/2
 f 2/1/3 1/2/3 5/4/3
@@ -29,5 +26,3 @@ f 6/2/4 8/3/4 9/4/4
 f 9/1/5 8/2/5 7/3/5 3/4/5
 f 3/3/6 7/4/6 1/1/6 2/2/6
 f 1/1/7 6/2/7 9/3/7
-l 1 4
-l 3 4

technic_cnc/models/technic_cnc_innercorner_upsdown.obj

@@ -1,27 +1,24 @@
-# Blender v2.73 (sub 0) OBJ File: 'technic-icorner-upsdown.blend'
+v -0.5 -0.5 0.5
-# www.blender.org
+v 0.5 -0.5 0.5
-o Cube_Cube.000
+v 0.5 0.5 0.5
-v -0.500000 -0.500000 0.500000
+v -0.5 0.5 0.5
-v 0.500000 -0.500000 0.500000
+v 0.5 0.5 -0.5
-v 0.500000 0.500000 0.500000
+v -0.5 -0.5 -0.5
-v -0.500000 0.500000 0.500000
+v -0.5 0.5 0.5
-v 0.500000 0.500000 -0.500000
+v -0.5 0.5 -0.5
-v -0.500000 -0.500000 -0.500000
+v 0.5 0.5 -0.5
-v -0.500000 0.500000 0.500000
+vn -1 0 0
-v -0.500000 0.500000 -0.500000
+vn 1 0 0
-v 0.500000 0.500000 -0.500000
+vn 0 -0.7071 -0.7071
-vt 0.000000 0.000000
+vn 0 0 -1
-vt 1.000000 0.000000
+vn 0 1 0
-vt 1.000000 1.000000
+vn 0 0 1
-vt 0.000000 1.000000
+vn 0.7071 -0.7071 0
-vn -1.000000 0.000000 0.000000
+vt 0 0
-vn 1.000000 -0.000000 0.000000
+vt 1 0
-vn -0.000000 -0.707100 -0.707100
+vt 1 1
-vn -0.000000 0.000000 -1.000000
+vt 0 1
-vn 0.000000 1.000000 0.000000
+s 0
-vn 0.000000 -0.000000 1.000000
-vn 0.707100 -0.707100 -0.000000
-s off
 f 6/1/1 1/2/1 7/3/1 8/4/1
 f 2/1/2 5/3/2 3/4/2
 f 2/1/3 1/2/3 5/4/3
@@ -29,5 +26,3 @@ f 6/2/4 8/3/4 9/4/4
 f 9/1/5 8/2/5 7/3/5 3/4/5
 f 3/3/6 7/4/6 1/1/6 2/2/6
 f 1/1/7 6/2/7 9/3/7
-l 1 4
-l 3 4

technic_cnc/models/technic_cnc_two_curved_edge.obj

@@ -1,84 +1,121 @@
-# Blender v2.73 (sub 0) OBJ File: 'slope_test_quarter_round_corner_onetexture.blend'
-# www.blender.org
-o corner1_Cylinder
 v 0.415732 0.277783 0.499997
-v 0.461936 0.191340 0.499997
+v 0.461936 0.19134 0.499997
 v 0.415735 0.277783 -0.415732
-v 0.461940 0.191340 -0.461937
+v 0.46194 0.19134 -0.461937
 v 0.490389 0.097544 0.499997
 v 0.353551 0.353551 0.499997
 v 0.353555 0.353551 -0.353551
-v 0.499996 -0.000000 0.499997
+v 0.499996 0 0.499997
 v 0.277783 0.415732 0.499997
 v 0.490393 0.097544 -0.490389
 v 0.277787 0.415732 -0.277784
-v 0.191340 0.461936 0.499997
+v 0.19134 0.461936 0.499997
 v 0.191344 0.461937 -0.191341
 v 0.097544 0.490389 0.499997
 v 0.097547 0.490391 -0.097545
-v -0.000000 0.499996 0.499997
+v 0 0.499996 0.499997
 v -0.499997 0.499997 0.499997
-v -0.499997 0.499997 -0.000030
+v -0.499997 0.499997 -0.00003
 v -0.499997 0.415735 -0.277785
-v -0.499997 0.461940 -0.191342
+v -0.499997 0.46194 -0.191342
 v -0.499997 0.490393 -0.097545
-v -0.500000 -0.500000 -0.500000
+v -0.5 -0.5 -0.5
 v -0.499997 -0.499997 0.499997
-v 0.000000 0.499998 0.000000
+v 0 0.499998 0
 v -0.499998 0.000014 -0.499999
 v -0.499997 0.353553 -0.353554
 v -0.499998 0.097545 -0.490393
 v -0.499997 0.277785 -0.415735
-v -0.499998 0.191342 -0.461940
+v -0.499998 0.191342 -0.46194
-v 0.499997 -0.000000 -0.499996
+v 0.499997 0 -0.499996
-v 0.500000 -0.500000 -0.500000
+v 0.5 -0.5 -0.5
 v 0.499997 -0.499997 0.499997
 v -0.499997 -0.499997 0.499997
 v -0.499997 0.499997 0.499997
-v -0.499997 0.499997 -0.000030
+v -0.499997 0.499997 -0.00003
 v -0.499997 0.415735 -0.277785
-v -0.499997 0.461940 -0.191342
+v -0.499997 0.46194 -0.191342
 v -0.499997 0.490393 -0.097545
-v -0.500000 -0.500000 -0.500000
+v -0.5 -0.5 -0.5
 v -0.499998 0.000014 -0.499999
 v -0.499997 0.353553 -0.353554
 v -0.499998 0.097545 -0.490393
 v -0.499997 0.277785 -0.415735
-v -0.499998 0.191342 -0.461940
+v -0.499998 0.191342 -0.46194
 v -0.499998 -0.033351 0.033348
-v -0.500000 -0.500000 -0.500000
+v -0.5 -0.5 -0.5
-v 0.500000 -0.500000 -0.500000
+v 0.5 -0.5 -0.5
 v 0.499997 -0.499997 0.499997
 v 0.415732 0.277783 0.499997
-v 0.461936 0.191340 0.499997
+v 0.461936 0.19134 0.499997
 v 0.490389 0.097544 0.499997
 v 0.353551 0.353551 0.499997
-v 0.499996 -0.000000 0.499997
+v 0.499996 0 0.499997
 v 0.277783 0.415732 0.499997
-v 0.191340 0.461936 0.499997
+v 0.19134 0.461936 0.499997
 v -0.499997 -0.499997 0.499997
 v 0.097544 0.490389 0.499997
-v -0.000000 0.499996 0.499997
+v 0 0.499996 0.499997
 v -0.499997 0.499997 0.499997
 v -0.033351 -0.033351 0.499997
 v 0.499997 -0.499997 0.499997
-vt 1.000000 0.500100
+vn 0 0 1
+vn 0 -1 0
+vn -1 0 0
+vn 0 0.8315 -0.5556
+vn 0 0.8061 -0.5917
+vn 0 0.6786 -0.7345
+vn 0 0.7071 -0.7071
+vn 0.8315 0.5556 0
+vn 0.8493 0.528 0
+vn 0.7345 0.6786 0
+vn 0.7071 0.7071 0
+vn 0 0.1951 -0.9808
+vn 0 0.1827 -0.9832
+vn 0 0.0475 -0.9989
+vn 0 0.0491 -0.9988
+vn 0.2427 0.9701 0
+vn 0.098 0.9952 0
+vn 0.1951 0.9808 0
+vn 0 0.9808 -0.1951
+vn 0 0.9952 -0.098
+vn 0 0.9701 -0.2426
+vn 0 0.528 -0.8493
+vn 0 0.5556 -0.8315
+vn 0.9832 0.1826 0
+vn 0.9327 0.3605 0
+vn 0.9239 0.3827 0
+vn 0.9808 0.1951 0
+vn 0.5917 0.8061 0
+vn 0.4258 0.9048 0
+vn 0.3827 0.9239 0
+vn 0.5556 0.8315 0
+vn 0 0.9048 -0.4258
+vn 0 0.9239 -0.3827
+vn 0 0.3605 -0.9327
+vn 0 0.3827 -0.9239
+vn 0.9988 0.0491 0
+vn 0.9989 0.0475 0
+vn 0 0 -1
+vn 0 1 0
+vn 1 0 0
+vt 1 0.5001
 vt 0.990395 0.597625
 vt 0.466756 0.466756
-vt 1.000000 0.000200
+vt 1 0.0002
 vt 0.000201 0.000201
 vt 0.597626 0.990394
-vt 0.500101 1.000000
+vt 0.500101 1
 vt 0.691404 0.961947
-vt 0.777830 0.915751
+vt 0.77783 0.915751
 vt 0.853583 0.853583
 vt 0.915752 0.777829
-vt 0.000201 1.000000
+vt 0.000201 1
 vt 0.961948 0.691403
-vt -0.000000 0.000000
+vt 0 0
-vt 1.000000 0.000000
+vt 1 0
-vt 1.000000 1.000000
+vt 1 1
-vt -0.000000 1.000000
+vt 0 1
 vt 0.533443 0.466757
 vt 0.000202 0.500115
 vt 0.402575 0.990397
@@ -94,7 +131,7 @@ vt 0.146597 0.000612
 vt 0.999995 0.000594
 vt 0.000178 0.874582
 vt 0.915751 0.874577
-vt 0.853580 0.999436
+vt 0.85358 0.999436
 vt 0.000178 0.999439
 vt 0.999808 0.625427
 vt 0.009599 0.625446
@@ -102,14 +139,14 @@ vt -0.000005 0.500594
 vt 0.999807 0.500594
 vt 0.597441 0.374574
 vt 0.499912 0.499435
-vt 0.000000 0.499434
+vt 0 0.499434
-vt 0.000000 0.374576
+vt 0 0.374576
 vt 0.999999 0.375154
-vt 1.000000 0.499969
+vt 1 0.499969
 vt 0.500093 0.500015
 vt 0.402562 0.375164
 vt 0.999812 0.999983
-vt 0.146415 1.000000
+vt 0.146415 1
 vt 0.084244 0.875149
 vt 0.999811 0.875131
 vt 0.990396 0.624861
@@ -122,48 +159,14 @@ vt 0.000001 0.249719
 vt 0.000001 0.124861
 vt 0.308782 0.250314
 vt 0.999998 0.250301
-vt 0.853403 -0.000000
+vt 0.853403 0
 vt 0.038047 0.750298
-vt 0.999809 0.750280
+vt 0.999809 0.75028
 vt 0.000177 0.500008
-vt 0.000000 0.500000
+vt 0 0.5
-vt 0.500000 1.000000
+vt 0.5 1
-vt 0.500000 0.500000
+vt 0.5 0.5
-vn 0.000000 -0.000000 1.000000
+s 1
-vn -0.000000 -1.000000 0.000000
-vn -1.000000 0.000000 0.000000
-vn 0.000000 0.831500 -0.555600
-vn 0.325800 0.887500 -0.325800
-vn 0.429700 0.794100 -0.429700
-vn 0.000000 0.707100 -0.707100
-vn 0.831500 0.555600 0.000000
-vn 0.531000 0.660300 -0.531000
-vn 0.707100 0.707100 0.000000
-vn 0.000000 0.195100 -0.980800
-vn 0.683900 0.254100 -0.683900
-vn 0.705500 0.067100 -0.705500
-vn 0.000000 0.049100 -0.998800
-vn 0.123100 0.984700 -0.123100
-vn 0.036800 0.998600 -0.036800
-vn 0.049100 0.998800 0.000000
-vn 0.195100 0.980800 0.000000
-vn 0.000000 0.980800 -0.195100
-vn 0.000000 0.998800 -0.049100
-vn 0.000000 0.555600 -0.831500
-vn 0.620400 0.479600 -0.620400
-vn 0.923900 0.382700 0.000000
-vn 0.980800 0.195100 0.000000
-vn 0.223300 0.948800 -0.223200
-vn 0.382700 0.923900 0.000000
-vn 0.555600 0.831500 0.000000
-vn 0.000000 0.923900 -0.382700
-vn 0.000000 0.382700 -0.923900
-vn 0.998800 0.049100 0.000000
-vn 0.707100 0.000000 -0.707100
-vn 0.000000 0.000000 -1.000000
-vn -0.000000 1.000000 0.000000
-vn 1.000000 0.000000 0.000000
-s off
 f 53/1/1 51/2/1 60/3/1
 f 61/4/1 53/1/1 60/3/1 56/5/1
 f 57/6/1 58/7/1 60/3/1
@@ -185,23 +188,22 @@ f 44/25/3 42/26/3 45/18/3
 f 42/26/3 40/19/3 45/18/3
 f 34/16/3 35/7/3 45/18/3 33/4/3
 f 51/2/1 50/13/1 60/3/1
-s 1
 f 19/27/4 11/28/5 7/29/6 26/30/7
-f 1/31/8 3/32/9 7/33/6 6/34/10
+f 1/31/8 3/32/9 7/33/10 6/34/11
-f 27/35/11 10/36/12 30/37/13 25/38/14
+f 27/35/12 10/36/13 30/37/14 25/38/15
-f 15/39/15 24/40/16 16/41/17 14/42/18
+f 15/39/16 24/40/17 16/41/17 14/42/18
-f 21/43/19 18/44/20 24/45/16 15/46/15
+f 21/43/19 18/44/20 24/45/20 15/46/21
-f 26/47/7 7/48/6 3/49/9 28/50/21
+f 26/47/7 7/48/6 3/49/22 28/50/23
-f 10/51/12 4/52/22 2/53/23 5/54/24
+f 10/51/24 4/52/25 2/53/26 5/54/27
-f 11/55/5 13/56/25 12/57/26 9/58/27
+f 11/55/28 13/56/29 12/57/30 9/58/31
-f 21/43/19 15/46/15 13/59/25 20/60/28
+f 21/43/19 15/46/21 13/59/32 20/60/33
-f 20/60/28 13/59/25 11/28/5 19/27/4
+f 20/60/33 13/59/32 11/28/5 19/27/4
-f 9/58/27 6/14/10 7/61/6 11/55/5
+f 9/58/31 6/14/11 7/61/10 11/55/28
-f 4/52/22 3/32/9 1/31/8 2/53/23
+f 4/52/25 3/32/9 1/31/8 2/53/26
-f 3/49/9 4/62/22 29/63/29 28/50/21
+f 3/49/22 4/62/34 29/63/35 28/50/23
-f 10/51/12 5/54/24 8/64/30 30/44/13
+f 10/51/24 5/54/27 8/64/36 30/44/37
-f 29/63/29 4/62/22 10/36/12 27/35/11
+f 29/63/35 4/62/34 10/36/13 27/35/12
-f 25/44/14 30/65/13 31/14/31 22/15/32
+f 25/44/15 30/65/14 31/14/38 22/15/38
-f 16/66/17 24/67/16 18/44/20 17/16/33
+f 16/66/39 24/67/39 18/44/39 17/16/39
-f 8/65/30 32/14/34 31/15/31 30/44/13
+f 8/65/36 32/14/40 31/15/40 30/44/37
-f 12/57/26 13/56/25 15/39/15 14/42/18
+f 12/57/30 13/56/29 15/39/16 14/42/18