This is necessary under Windows systems, and direct IPv6 connections.
Windows universally disallows ':' from occuring in filenames.
Other disallowed characters on Windows:
\ / * ? " < > |
are not relevant to hostnames, IPv4 or IPv6 addresses.
Anyone who has got an existing server map saved on Linux with ':' in
the world save will want to keep that save.
GenericCAO::getPosition() did not take the camera offset into account
LocalPlayer attachment cleanup: Use sane getParent() function
Make that getPosition() (GenericCAO and LocalPlayer) always return the absolute position
* Formspec: Fix priorities for version < 3
1) Introduce 'priority' to 'FieldSpec'
2) Sort elements based on 'priority'
3) Assign 'name' to the Item Image Button's image to show tooltips again
Low-disruption first step towards removing the hardcoded cave liquid
code. Since MT 5.0.0 cave liquids can be defined and located by
biome definitions instead.
In games that do not yet use biome definitions to define and locate
cave liquids (MTGame does), lava will now appear below
y = water_level - 256 instead of below 'lava depth' (usually y = -256).
Therefore no change in most mapgens if using the default 'lava depth'.
Previously, the only way to disable the 3D noise tunnels was to set
'cave width' > 1.0, however doing so did not disable the very intensive
noise calculations or the generation loop.
All the other types of cave generation (randomwalk caves, caverns)
can already be independently and completely disabled.
This feature is now needed more because the small randomwalk caves are
now available for use as an alternative to the 3D noise tunnels.
Add mapgen parameters to set the range of the random number of
randomwalk caves per mapchunk, and to set the proportion that are
flooded with liquids.
Default values are, for now, unchanged from the previous hardcoded
values.
Add parameters to allow small randomwalk caves
Disabled by default for now as they have never been present in the
non-mgv6 mapgens.
Revert gamma upper limit to 3.0 because that was raised based on
a misunderstanding and had no benefit. A sane upper limit is
needed as players on a competitive server tend to use the maximum.
Set gamma lower limit to 0.33 for consistency with 3.0.
Set sane limits on alpha, beta, boost and enforce these in code
to limit values entered in minetest.conf and to avoid easy cheating
by editing settingtypes.txt.
Improve documentation and 'readable' setting names.
Clarify that gamma does not significantly affect natural night light.
light.cpp: Various codestyle and comment improvements.
This value reduces how far randomwalk caves can extend into the
mapchunk padding, to avoid 'out of voxelmanip' cave nodes which cause
flattened cave walls.
Testing shows that a value of 2 (instead of 10) is enough to make
'out of area' nodes extremely rare.
Reducing this value results in a higher chance of overlap and
connection with caves of neighbour mapchunks.
- Add style properties for overriding the the hovered/pressed state
- By default, hovered buttons are a lighter version of the base color
- By default, pressed buttons are a darker version of the base color
- Add hovered bg image support for image buttons (style property)
Does not clear the parent's attachment information when the child is deleted locally.
Either it was removed permanently, or just temporary - we don't know, but it's up to the server to send a *detach from child" packet for the parent.
1. Pass current camera offset to shader, so shader have access to the global coordinates
2. Pass animation timer to fragment shader. C++ code is already there, just wasn't declared in the shader
3. Delay animation timer wrap-around (from 100s to about 16 minutes)
The setting now accepts values between 1 and 8 in the
Advanced Settings menu.
Values 0 and 1 now behave the same way (setting it to 1 won't
disable MSAA anymore), so there's no need to expose 0 as a value.
This closes #8939.
While preserving the general character of dungeon structure.
Slightly increase the range of standard room horizontal size, while
preserving the average horizontal size.
Return to classic maximum large room size of 16x16x16.
Make 1 in 4 dungeons have a 1 in 8 chance for each room being 'large',
making multiple large rooms possible for the first time.
Make 1 in 8 dungeons allow diagonal corridors, to make these a little
more common.
Make corridor width vary from 1 to 2, but forced to 2 if diagonal
corridors are allowed, to make them passable.
Add some comments.
Safety-guards for CSM callbacks to abort on a bad implementation
Only run callbacks when the mods are loaded (and with it: builtin)
Duplication checks inside constructors
Before opening the file for writing, its file size is tested. If it exceeds 50 MB, it is moved to debut.txt.1, otherwise the log is appended to the old messages. An old debut.txt.1 is removed if it already exists.
Calculate 'i' inside 'y' loop to avoid 'i' and 'y' becoming
out of step due to the uses of 'continue'.
Simplify calculation of 'p2d' when coordinates are inverted.
Remove some unnecessary and unreliable 'index out of
voxelmanip' checks.
Move calculation of '&em' out of loops.
For 'Loop further down until not air' code, use y coordinate
to detect being out of voxelmanip, instead of checking index
which did not detect that.
Add and improve comments.
Indent the 'for (;; y--) {' loop.
Improve format and fix codestyle issues.
This change reduces the amount of sent data towards clients. Inventory lists that are already known to the player are skipped, saving quite some data over time.
Raises protocol version to 38 to ensure correct backwards-compatible code.
In MapgenV6::flowMud(), the previous implementation of coordinate
inversion caused the 2 inverted mudflow iterations (out of the 3
iterations) to not loop over the area, so only 1 non-inverted
iteration occurred.
Fix this bug but only iterate mudflow twice, as mapgen v6 has only
had 1 iteration for many years. There is now a good balance of 1
non-inverted iteration and 1 inverted iteration.
* Fix unnecessary exception use in Server::SendBlocks
The code in this method calls getBlockNoCreate and then
messes around with try...catch to skip blocks which are not
in the memory. Additionally, it repeatedly calls
m_env.getMap() inside this loop. Speed the code up by
extracting the m_env.getMap() out of the loop and getting
rid of the try...catch.
* Fix unnecessary exception use in Server::SendBlock
Another unnecessary try...catch is slowing down
Server::SendBlock. Remove that to speed it up and get a nice
side effect of simplifying the code in question.
* Fix unnecessary exception use in MMVManip::initialEmerge
Remove another unneeded exception usage from
MMVManip::initialEmerge to speed that code up and simplify
it but be careful to not remove the braces as there is a
TimeTaker in use there.
The Map::getSectorNoGenerate throws an exception but no other
code is really dependent on that. Fix the odd instance of
misuse in ClientMap::emergeSector and remove the exception
throwing version of the method along with the "NoEx" suffixes
in the names of these methods.
Update the profiler names to make more sense of what they actually represent
Move the profiler code from header to its source file
Use monospace font to align lines
Format the statistics line to align better with surrounding values
Refresh the profiler each 3 seconds (roughly)
The isNodeUnderground calls getBlockNoCreate which calls
getBlockNoCreateNoEx and throws InvalidPositionException
if the returned value is nullptr, which isNodeUnderground
then catches to return "false". Remove the try..catch in
isNodeUnderground by calling getBlockNoCreateNoEx instead
of getBlockNoCreate and checking the returned value for
nullptr.
Pointers shall be set to nullptr, not 0, according to the
coding standards. By implication they shall be compared with
nullptr, not 0, too. Fix this code to match that.
This fixes overridden items keeping their old groups in the group to
items mapping even after their groups have been changed in lua.
It also prevents a more widespread issue where overriding an item
will add its content ID *twice* to the mapping, resulting in odd
behaviour in features such as ABMs.
This fix consists of two parts:
- Clear the list of stored entities. This has no side-effects.
- Catch the case where active entities exist and print a message.
Clearing the active entitiy list has side-effects that should
be handled. (those entities are known to the environment and
to clients).
As avoiding those side-effects is more complex, and as this
problem is not expected to occur (with PR #4847 merged), there
is no real incentive to implement this ATM.
This issue was a contributing factor to bug #4217. With the other
contributing factor removed (PR #4847), this commit makes sure this
factor does not go unnoticed if it ever happens again.
ANAND
Hugues Ross
lhofhansl
Maksim
Montandalar
DS
Paramat
Lejo
SmallJoker
rubenwardy
Paul Ouellette
v-rob
Pierre-Yves Rollo
sfan5
SmallJoker
random-geek
Dmitry Marakasov
Warr1024
updatepo.sh
Jacob Lifshay
lhofhansl
Hugo Locurcio
HybridDog
Muhammad Rifqi Priyo Susanto
Pedro Gimeno
theviper121
upsilon
Jozef Behran
Beha
Rogier