Commit Graph

314 Commits

Author SHA1 Message Date
Auke Kok eb49009d02 FreeType: address font license issues (#5230)
It appears we were shipping font files without license text, and I
had my doubts about the bitmap fonts being usable directly.

This replaces existing TTF fonts with Apache-2.0 licensed fonts from
chome core (Cousine, Arimo, Tinos). Include the full license file
for all three fonts.

The Lucida Sans font bitmap is removed entirely for non-freetype
builds. There is therefore only mono fonts for non-freetype builds.
2017-02-14 01:08:17 -08:00
Auke Kok 5707b739f3 Change default nodetimer_interval to 0.2s. (#5193)
We want to reduce the chance that we get lots and lots of node
timers all happening once a second, because we're better off doing
small bits of work as they are available.

Reducing this to 0.2 seconds will greatly reduce the total amount
of nodetimers that elapse at the same instance, while not effecting
total work load. This results in a far better chance of the server
keeping up with work loads.
2017-02-09 08:00:37 +01:00
Ezhh 0c9189d109 Add console height setting (#5136) 2017-01-30 02:10:17 +10:00
Loïc Blot 6d5a407133 Add show_statusline_on_connect setting (#5084)
Add show_statusline_on_connect setting
2017-01-21 19:30:42 +01:00
sfan5 f0c6feca97 Fix build with freetype support disabled 2017-01-14 12:39:20 +01:00
ShadowNinja 8002366097 Organize defaultsettings.cpp 2017-01-13 19:06:51 -05:00
ShadowNinja 7ae7f1ea4c Enable mod security by default 2017-01-13 14:08:24 -05:00
Auke Kok 094a5a73d3 Redo light.cpp.
Remake the light_decode_table.

The table starts out without pre-filled in values since those
are always discarded by the code apparently. We calculate a
pseudo curve with gamma power function, and then apply a new
adjustment table.

The adjustment table is setup to make the default gamma of 2.2
look decent: not too dark at light level 3 or so, but too dark
at 1 and below to be playable. The curve is much smoother than
before and looks reasonable at the whole range, offering a
pleasant decay of light levels away from lights.

The `display_gamma` setting now actually does something logical:
the game is darker at values below 2.2, and brighter at values
above 2.2. At 3.0, the game is very bright, but still has a good
light scale. At 1.1 or so, the bottom 5 light levels are virtually
black, but you can still see enough detail at light levels 7-8,
so the range and spread is adequate.

I must add that my monitor is somewhat dark to begin with, since
I have a `hc` screen that doesn't dynamic range colors or try to
pull up `black` pixels for me (it is tuned for accurate color and
light levels), so this should look even better on more dynamic
display tunings.
2016-12-28 14:16:39 -08:00
Lars Hofhansl 2f59a0c840 Process ABMs in a spherical volume instead of cubic
Increase active_block_range default to a 3 mapblock radius.
2016-12-24 00:28:39 +00:00
sfan5 09f1a0c1ff Disable mod security by default (closes #4944) 2016-12-21 14:13:10 +01:00
Auke Kok 78bf7c46e5 Mapgen: Make mgv7 the default in UI
The actual menu default comes from defaultsettings.cpp.
2016-12-16 12:31:38 +00:00
Lars Hofhansl 075833e393 Fog: Make fraction of visible distance at which fog starts configurable
Optimise the fetching of global settings 'camera_smoothing',
'cinematic' and 'cinematic_camera_smoothing'.
Cache 'cam_smoothing'.
2016-12-07 04:07:54 +00:00
lhofhansl e1842ed370 Optionally disable optimization that causes underwater and cave rendering glitches. (#4686) 2016-10-30 23:35:55 -04:00
paramat 63a3bb229a Changes to static object storage limit and error message
Move static object storage force-delete message from errorstream to
warningstream.
Increase 'max objects per block' setting to 64.
Add missing spaces in warning code.
2016-10-20 03:40:47 +01:00
ShadowNinja 2ff054d041 Enable mod security by default 2016-10-16 01:14:54 +01:00
Loic Blot d4c76258e3 Chat: new settings to prevent spam
Added the following chat coreside features
* Chat messages length limit
* Message rate limiting
* Message rate kicking

Note:
* handleChat now takes RemotePlayer pointer instead of u16 to remove useless
  lookups
2016-10-05 00:13:37 +02:00
James Stevenson 679c8de63f Increase default font size by 1 2016-09-21 08:04:11 +02:00
est31 d767f025cb Client: disable pre v25 init sending by default
Disable the ability to connect to old servers by default to
improve password security.

If people still want to connect to old (0.4.12 and earlier)
servers, they can flip the send_pre_v25_init setting.

Add the ability to detect if we've tried to connect
to a server which only supports the pre v25 init protocol,
and show an apropriate error message. Most times the error
will already be catched at the serverlist level, the
detection mechanism only acts as last resort, because the
"Connection timed out" error message that would be shown
otherwise would be very confusing.

Automatic "fixing" of this condition is not desired,
as it would allow for downgrade attacks.

As already 161 of the 167 servers on the serverlist
support the new srp based auth protocol (> 96%),
the breakage should be minimal.

Follow up of commit

af30183124 "Add option to not send pre v25 init packet"

Also change the pessimistic assumption of masterlist
server versions to optimistic, in order to avoid buggy
behaviour (favourites not in the serverlist would be
denied to connect to, etc).
2016-08-22 20:23:28 +02:00
Esteban I. Ruiz Moreno 2c31b79235 Add zoom, tweakable with zoom_fov, default key: Z (like optifine) 2016-08-10 12:18:25 +02:00
rubenwardy 538af97d8d Remove cinematic toggle on F8
Also update cinematic mode's description to include mouse
2016-07-05 19:50:30 +02:00
est31 f649147080 Disable joysticks per default for now
It seems that various different devices register as
Joysticks on linux, and their presence has caused
lots of confusion amongst minetest users.

Therefore, disable the joystick feature.

Closes #4261
Closes #4221
2016-07-04 20:49:13 +02:00
est31 2060fd9cbe Initial Gamepad support
Adds initial ingame gamepad support to minetest.

Full Formspec support is not implemented yet and
can be added by a later change.
2016-06-03 19:42:57 +02:00
Ekdohibs 14ef2b445a Add colored text (not only colored chat).
Add documentation, move files to a proper place and avoid memory leaks.
Make it work with most kind of texts, and allow backgrounds too.
2016-05-31 17:34:29 +02:00
kwolekr ebe638c32d Mapgen V6: Synchronize spflags with defaultsettings
This fixes an issue where trees are omitted from Mapgen V6 maps on
configurations that explicitly defined the mgv6_spflags setting.
2016-05-10 22:44:18 -04:00
paramat 1db499dc6d Defaultsettings/Android: Increase 'max block generate distance' to 3 2016-05-08 22:08:29 +01:00
Maksim Gamarnik 0f6e4a0913 Optimize default settings for Android build 2016-05-07 21:09:07 +10:00
TriBlade9 6530ed4dd8 Add option to disable entity selectionboxes. (#3992)
Setting only loaded once, default value is to enable them.
2016-04-14 11:20:11 +02:00
Auke Kok c5c727d627 Allow NodeTimer, ABM and block mgmt interval changes.
ABM's are hardcoded to run every 1.0s, NodeTimers are hard coded to
run at every 1.0s. Block mgmt is running every 2.0sec.

However, these timers can be better tuned for both higher and lower
values by server owners. Some server owners want to, and have the
resources to send more packets per second to clients, and so they
may wish to send smaller updates sooner. Right now all ABM's are
coalesced into 1.0 second intervals, resulting in large send queues
to all clients. By reducing the amount of possible timers, one can
get a far better response rate and lower the perception of lag.

On the other side of the camp, some servers may want to increase
these values, which again isn't easily doable.

The global settings abm_interval and nodetimer_interval are set to
current values by default. I've tested with 0.2/0.5 type values
and noticed a greatly improved response and better scattering of
nodetimers, as well as enjoying not faceplanting into doors with
pressure plates anymore.
2016-03-19 17:56:26 +00:00
est31 af30183124 Add option to not send pre v25 init packet
The legacy init packet (pre v25) sends information about the client's
password that a server could use to log in to other servers if the
username and password are the same. All the other benefits of SRP of
protocol v25 are missed if the legacy init packet is still sent during
connection creation.

This patch adds an option to not send the v25 init packet. Not sending
the v25 packet means breaking compat with pre v25 servers, but as the
option is not enabled by default, no servers are affected unless the
user explicitly flips the switch. More than 90% of the servers on the
serverlist support post v25 protocols.

The patch also fixes a bug with greying out of non compliant servers
being done wrongly, the min and max params were mixed.
2016-03-15 17:20:09 +01:00
Diego Martinez 2c72f6da7b Add options for screenshot format and quality 2016-03-12 17:12:43 -05:00
RealBadAngel f9d727764f Mapblock mesh: Allow to use VBO 2016-02-26 00:51:01 +00:00
RealBadAngel 8eb7ddb0a2 Remove new_style_water 2016-02-26 00:50:46 +00:00
Jeija 31e0667a4a Add Lua interface to HTTPFetchRequest
This allows mods to perform both asynchronous and synchronous HTTP
requests. Mods are only granted access to HTTP APIs if either mod
security is disabled or if they are whitelisted in any of the
the secure.http_mods and secure.trusted_mods settings.

Adds httpfetch_caller_alloc_secure to generate random, non-predictable
caller IDs so that lua mods cannot spy on each others HTTP queries.
2016-02-22 15:39:41 +01:00
RealBadAngel b2aabdfe07 Camera: remove auto tune FPS, single view range setting 2016-02-21 18:18:13 +01:00
RealBadAngel 2f4cf0bcca Remove preload_item_visuals code
Closes #3748
2016-02-21 17:46:50 +01:00
RealBadAngel eb3840a3f8 Filmic HDR tone mapping 2016-02-09 02:55:59 -05:00
paramat 4adbd69a37 FindSpawnPos: Let mapgens decide what spawn altitude is suitable
To avoid spawn search failing in new specialised mapgens
Increase spawn search range to 4000 nodes
Add getSpawnLevelAtPoint() functions to EmergeManager, class Mapgen
and all mapgens
Remove getGroundLevelAtPoint() functions from all mapgens except mgv6
(possibly to be re-added later in the correct form to return actual
ground level)
Make mgvalleys flag names consistent with other mapgens
Remove now unused 'vertical spawn range' setting
2016-02-09 07:14:45 +00:00
RealBadAngel b44da4916a Cleanup selection mesh code, add shaders for halo and selection boxes 2016-02-08 03:57:42 -05:00
RealBadAngel 6cd2b3b445 Use meshes to display inventory items 2016-02-07 19:51:55 +01:00
paramat d7bbe81726 Mapgen: Add global 'decorations' flag
Flag is set by default in MapgenParams
The global 'trees' flag remains but is now
undocumented and unset by default in MapgenParams
Add mgv6_spflag 'trees' set by default in
defaultsettings.cpp to affect new worlds only
This is automatically backwards
compatible for existing worlds
2015-11-21 00:10:08 +00:00
Duane Robertson b6dfae0221 WoW-style Autorun
This allows the player to toggle continuous forward with a key (F by default),
so we don't have to hold down the forward key endlessly.
2015-10-29 21:48:57 +01:00
paramat c0a7c670a4 findSpawnPos: Add setting for max height above water level
Increase default from 6 to 16 to help with mgv7 and mgfractal
Large-scale or alternative mapgens can result in a lowland spawn point not
being found, causing a spawn at (0, 0, 0) possibly buried underground
The max height is now settable to allow correct player spawn
in any mapgen or when using custom noise parameters
2015-10-29 20:03:15 +00:00
ShadowNinja 2139d7d45f Refactor logging
- Add warning log level
- Change debug_log_level setting to enumeration string
- Map Irrlicht log events to MT log events
- Encapsulate log_* functions and global variables into a class, Logger
- Unify dstream with standard logging mechanism
- Unify core.debug() with standard core.log() script API
2015-10-14 01:03:54 -04:00
paramat 17b7b7c85f Dungeongen: Remove floating frames
Preserves the rare unbroken protruding dungeons
Fix random range for first room roomplace
Fix checked volume for first room 'fits' bool
and check for 'untouchable' flag instead of 'inside'
Remove 'enable floating dungeons' setting
2015-08-29 06:27:29 +01:00
paramat ee6cad1546 Defaultsettings: Increase client_mapblock_limit to 5000 2015-08-15 20:29:30 +01:00
est31 a8e238ed06 Add count based unload limit for mapblocks 2015-08-13 07:56:07 +02:00
Kahrl 63b12f1f04 Fix camera updates being toggled by N key in release mode (#2762) 2015-08-07 06:02:06 +02:00
rubenwardy ec796b8e81 Add map limit config option 2015-08-02 14:27:04 +02:00
est31 3b50b2766a Optional reconnect functionality
Enable the server to request the client to reconnect.

This can be done with the now extended minetest.request_shutdown([reason], [reconnect]) setting.
2015-07-23 07:38:13 +02:00
est31 bf7174f3f9 Server kicks: make messages configurable, cache wstring 2015-07-17 06:37:16 +02:00