Adds a mesh model that appears when a chest is opened. The chest
stays visibly open as long as the player keeps it open. When the
player closes the formspec, the chest returns back to the closed
shape. While opening and closing, a sound plays.
A second person inspecting the chest will trigger a second sound
open. However, only after the last player closes the chest, does the
chest actually visually close and is the sound close played. This
keeps mesh updates to a minimum.
While it's possible that a server shutting down may cause chests
to remain open, this does not affect the chests' working matter,
and opening or closing them should fix them.
Old chests are converted to the new style by LBM. I previously
had them converted on open but this was unreliable, and LBMs
don't have that problem.
Open chests cannot be dug up. This prevents people from keeping
a chest open and digging it out as well, since closing a chest
would place a chest back (swap) at the spot. We could protect
against this, but it still messes up the client and causes a lot
of "missing node inventory" error messages otherwise. It's
unlikely but possible that a player lagging out causes a chest
to stay "open" and thus unremovable by digging, but there are
other ways of dealing with that - a server restart fixes that
issue.
If the lid of the chest is obstructed, the sounds continue to play,
but the lid isn't opened. Obstructed means that a node is present
above the chest lid, however, we ignore several node types like signs,
torches (not 3d) and wallmounted nodeboxes (typically signs) since
they don't pose any major obstruction in almost any case, and are
typically found above chests. Additionally, the selection box of the
opened chest does not include the lid, and so one can still interact
with e.g. a sign behind an open lid.
Due to the fact that chests now have 7+ textures, we can no longer
use materials (limit: 6) to texture the chest, and so there is now
a single UV mapped image that applies both to open and closed chests.
While this does mean texture pack makers need to create it, this
is extremely simple and consists of a simple cut'n'paste over the
template and should be really easy to do. Only one texture file is
now then used for both open and closed chests.
Previously i had matched ore density to moreores, but this density was
too high and out of balance with MTGame, reduce density to be similar
to copper ore.
The 2 levels of underground ore were overlapping, fix.
Textures are actually by kilbith, update credits.
Also credit kilbith for bronze, copper, gold and steel blocks, credits
had not been updated at the time.
Use Calinou's textures from moreores mod.
Craft bronze from tin and copper instead of steel and copper.
Match ore density to the moreores mod but start ore at a depth of
y = -32 to be part of the depth progression of other ores.
Allow skeleton keys to be stacked by converting them to craftitems and
adding a few lines of code to add a new itemstack to the inventory with
the new key or drop it at the player position if the inventory is full.
Bush saplings grow in half the time of tree saplings.
Bushes do not need 'from sapling' schematic variants because only the
stem node is force-placed in the mapgen schematic, so only the sapling
is force-replaced.
Bush leaves drop saplings with a rarity that ensures at least 1 sapling
per bush on average.
Slabs are placed horizontal instead of vertical, even if they are
placed on a wall.
Slabs are rotated automatically if they are placed to another slab,
no matter which material.
Slabs are placed at the lower position if the placer points into
the lower half of the pointed node and to the upper position if
pointed to the upper half.
Stairs are placed normal if the placer points to the lower half of
the pointed node and rotated upside down if pointed to the upper half.
As part of making vertical travel easier to reduce reliance on
sneak ladders.
Calculate using cubic pixels of steel.
A steelblock is 16^3 = 4096 cubic pixels steel.
6 ingots is 6/9 steelblocks.
A rail is a 2*2*16 pixel length of steel, 64 cubic pixels steel.
6 ingots produces 2*21 rails = 21 rail nodes.
Choose 18 for an even number that is a multiple of ingot number.
Replace the stick with 2 wood in the recipe to be closer to the amount
of wood that would be needed for 20*4 sleepers.
Replace 2 mese crystal fragments with 1 mese crystal to
compensate for the larger number of nodes returned. The result
is the recipe is much more generous with steel usage but slightly
less generous with mese usage, keeping power rail cost reasonably high.
Replace 2 coal lumps with 1 for a similar recipe to power rails.
Flora is converted to dry shrub in desert sand and silver sand.
No conversion in sand to preserve sand dune grasses.
Dry shrubs do not spread so this conversion, used by players, is the
only way to generate them.
Replace possibly trademarked artwork with royalty free and
OK for commercial use artwork.
The Pup appears by default but does not alias the Nyan Cat nodes
away. For that you will have to enable the setting. A settingtypes.txt
is provided to make that really easy. This allows people to get
an out-of-tree mod and not have their Nyan nodes disappear.
The mod can also be disabled entirely this way for those who don't
want it.
There's some eatser eggs in here as well. Instead of making the
nodes burnable, they are edible, and make you bark and howl. And
perhaps something else too.
If there is no group:soil node found below, do not replace flora with
dry shrub, this was breaking flower pots and other mods.
Originally, flora would only turn to dry shrub if in desert sand.
Use the soil group more instead of checking for multiple node names.
Remove 'neighbors' from ABM.
Turn any flora to dry shrub if on a non-soil, except when on default:sand
to avoid dune grasses being replaced.
Search for "group:soil" when searching for a position for the new flora
node, instead of searching for multiple node names, however do not spread
flora onto desert sand, which is in the soil group.
Remove default:dirt_with_snow from the soil group as it would be frozen
soil. It can be dug and placed to turn it into dirt (consider this some
extra work needed to make it cultivatable).
Commit c68b8274fe prevented books from
being copied in the crafting grid, and made it so that old books, though
seemingly successfully transferred to the new format, could not be written
to as the old data still persisted.
- Allow rotation of wallmounted nodeboxes (signs) since they are
now rotating properly.
- Instead of testing `ndef` several times, do it once, correctly.
- Simplify exception logic for nodes that have `on_rotate` set.
- For simplicity, return itemstack, always.
- Remove a useless nil check.
Previously you could place junglegrass on dirt to convert that dirt to
dirt_with_grass, but this is unsuitable now that rainforest has a
surface of dirt_with_rainforest_litter.
Remove junglegrass from the 'grass' group.
Since meta secret field is blank on any keys (default:key) obtained using
/give, the game will crash if you attempt to use one of these. This follows
along the principle that the game should never have any reason to crash.
A simple set of biomes for now: Ocean, coniferous forest, grassland,
sandstone desert.
Update biome lists for blob ores and decorations.
Make sandstone desert filler 1 node deeper to match other deserts.
Instead of right click, the skeleton key is now a true `tool`
in the sense that it's default left-click action is to create
a key for the locked object.
This is far better than the outcome of the patches we've done
where the only way to create a key for a locked item was to
use sneak+rightclick. Now keys are perhaps a bit more sensible,
left for making keys, right for opening stuff with keys.
Fixes #1625
Allows rotating things like signs and torches. Axis rotation
rotates over all 6 faces, face rotation flips upside down to
flat on floor only, and of course in the 4 horizontal directions.
Made the code a bit more modular to account for different rotation
schemes. Should be easier to extend from here on to other needs,
and the functions can be reused by other mods for convenience.
Usage and tool break sounds were played at 'pointed_thing.above' which
can be nil if not pointing at anything or at an entity. This caused
sounds to be played to all players on a server non-positionally.
Fallback to player pos for sounds if 'pointed_thing.above' is nil.
Replace 'pt' variable with 'pointed_thing' in 'register_tool'.
Currently jungletrees and junglegrass use sidelen 80 for simplicity,
but this results in a more uneven distribution of decorations. A more
even distribution helps keep rainforest darker with a more unbroken
canopy.
This is also more consistent. 80 is based on the default mapchunk
size, all other decorations use sidelen 16 or smaller to divide into
any mapchunk size.
Denser jungletree for darker rainforest:
Highest 'jungletree' nodes now prob 255.
Add a 5th lower branch layer.
Increase lower branch layer y-slice prob to 191.
Aspen:
Extend trunk upwards by 1 node to reduce leafdecay radius to 2.
Pine:
Make lower trunk 1 node longer so that lowest branches are more often
higher off the ground, also to make pines taller.
Appletree:
Make 2 opposite branches prob 255, the other 2 prob 127, to avoid
trees with 1 or 0 branches. Therefore also add random rotation.
Increase to 5 ladders from 7 sticks.
More generous to help with vertical travel.
Divide the log core volume of 14 * 14 * 16 cubic pixels by the volume of
a ladder node with two 2 * 2 * 16 side pieces and four 2 * 1 * 16 rungs
(cut down to length 14), to get 12.25 ladders per log.
The recipe of 7 stick items is 7 / 16 = 0.4375 logs.
Ladders per 7 stick items = 0.4375 * 12.25 = 5.36.
Utilizes the new key-meta (as with nodes) and the ability to set the description of an itemstack with the `description` meta key. Includes code to convert old metadata to new key-meta.
- beds
- boats
- carts
- key/skeleton key
- seeds
All these had on_place handlers that did not allow nodes with
an on_rightclick() handler to be used first (if not using
sneak). This code is taken from the torches mod and applied
everywhere.
This allows all these items to e.g. be inserted into the `frame`
mod's item frames.
Utilizes several new features allowing the description of an item to be changed using the `description` meta key. This also moves keys from using the old single-value itemstack metadata system to the new node-like metadata system.
Return to previous parameters interval = 1, chance = 2.
Compensates for the increase in default active block radius.
Large amounts of lava cooling at once is known to overload sound
creation, producing error messages.
As part of the original plan for a new lightcurve.
With the old lightcurve lights were so dim all light sources had light
source level 13 or 14 to compensate, resulting in almost no difference
between torchlight and a maximum brightness light.
The new lightcurve makes all light sources effectively much brighter by
spreading visually-bright light further, torches are now slightly too
bright. So now we can reduce the light source level of torches while
actually making them effectively brighter than with the old lightcurve.
This also creates a desirable difference between torchlight and a
maximum-brightness light source.
This implements a node-timer based leafdecay mechanism, and exposes
an API to use it in mods.
The API is documented in game_api.txt.
`default.register_leafdecay(leafdecaydef)`
`leafdecaydef` is a table, with following members:
{
trunks = { "default:tree"}, -- nodes considered trunks
leaves = { "default:leaves", "default:apple"}, -- nodes considered leaves
radius = 3, -- activates leafdecay this far from the trunk
}
The algorithm will drop `leaves` items in the area if no `trunks` are found
in the `trunk_radius` sized area around the position of the leaf. If a node
listed in `leaves` has a group `leafdecay_drop > 0`, then the item is dropped,
otherwise the item is removed but not dropped.
The algorithm also implements a value `default.leafdecay_speed` (default
15) which can be modified to increase or decrease of the leaf decay. The
algorithm will vary the actual speed a bit to introduce randomness.
Leaf decay is randomized by 0.1 seconds to reduce the chance that
decay happens many times on the same second interval. This requires
nodetimer_interval to be set to values lower than 1.0 to have an
effect.
The leaves will decay between 2 and 10 seconds after digging the trunk,
and happen at non-integer second intervals.
-- The API was added by sofar.
Plantlike drawtype no longer applies 'visual scale' twice, so now we
use the actual scale factor desired.
Remove unnecessary 'visual_scale = 1.0' lines.
Light level 14 to be able to grow plants.
3 returned from crafting with 1 glass node, 3 mese crystals and 1
wood plank.
Seamlessly placable on appletree wood fence posts.
Now that biomes are being specified for blob ores we need a separate
set of blob ore registrations for mgv6 which has no Biome API biomes
defined.
Various minor improvements to mapgen.lua.
Now that the missing 'default_dig_snappy' sound has been added we can
remove the dirt dig sound from the table. All nodes that use the
leaves defaults table have group 'snappy' so 'default_dig_snappy' now
becomes their default dig sound.
This reverts commit 5e4a6e8ac6, and
commit 60cf3f85b6.
The original door API rewrite I posted had all rotation disabled using
the correct on_rotate() handler returning `false`. Two subsequent
changes attempting first to enable simple rotation and second disabling
that again changed the callback handler to a boolean `false`, which
is incorrect use in the screwdriver API, and actually allows rotation.
The proper way to disable rotation for facedir nodes it to use a full
callback handler that does `return false`.
TNT removes flammable nodes from the destruction radius and should
remove flames within it too because they lose their fuel and would
be removed by ABM later anyway.
Create a simple triplet table (src1, src2, dst) for all the dye
recipes and group them logically, with a bit of explanation where
they actually come from.
This prunes a lot of recipes from the list, but the old list had a
ton of combinations that did not make any sense, as well as recipes
that were just gross approximations and duplicates, mixing the same
color with itself just to get the same color back, which just wastes
packets at logon.
The list has been checked to allow all colors created from the basic
dyes (flowers+coal) so that all colors can be crafted.
Craft 4 default:sand to default:sandstone.
Previously, 4 group:sand was craftable to sandstone and sandstone was
craftable back into default:sand, allowing silver and desert sands to
be converted into incorrect colour sandstone and yellow sand.
I recently made glass footstep and dig gains too low, raise slightly.
Change dirt dug gain from above-maximum 1.5 to maximum 1.0.
Reduce gain of footsteps: stone, dirt, gravel, wood, metal
Raise gain of leaves footstep.
Some nodes with the snappy group (wool, glass pane, seeds) were missing
sound when dug with a sword.
Adding the sound causes it to be used for glass pane, so define a 'dig'
sound in the 'node sound glass defaults' table, use the footstep sound.
Adding the sound also causes it to be used for seeds which deliberately
have no dig sound, so add an empty sound override for seed dig.
Reduce the gain of the glass footstep sound which was excessively loud.
Add some freesound members to license.txt.
Handbrake was barely noticeable and fairly useless.
Equalisng with brake rail deceleration makes it more intuitive to use
and easier to judge stopping distance.
Previous code:
Used looped sounds without attaching them to objects or playing direct
to players.
The looped sounds are not 'stopped' when players leave the area.
These may be causing the bug where sounds are heard at extreme
distances.
Entering a world with already present flames results in silent flames.
Sounds are often played at a large number of points in a 6 node lattice.
A large fire is reported to cause a high load, disabling the sound code
is reported to help this.
New code:
Optional flame sound to not interfere with ambience mods.
Permanent flame now has sound.
For multiple flames, sound is positioned at the centre of all flames, and
has volume determined by flame number.
The original freesound 'large fire' recording was used to create 3 sounds
that play at random for a non-repetitive effect. At low volume it is
suitable for small fires.
Original sound files and sound function (as an empty function) kept
temporarily to reduce disruption.
Reduce gain of flame extinguish sound.
Some GPUs cause visual bugs when mip-mapping is used with indexed textures
that use alpha. Because leaves are sometimes rendered opaque it is even
more important to keep these as RGBA to preserve the correct background
colour.
Papyrus:
Make base node dirt instead of dirt_with_grass. Formerly the exposed
dirt would change to grass but the new grass spread ABM now prevents that.
Waterlily:
Don't specify a water_source node in the schematic, as it may be used in
river water. It was not force-placed but should really be "air" prob = 0.
This changes the farming API such that any nodedef with paramtype2
and place_param2 are passed through to all the plant stages of the
farming plant.
This allows plants to use an alternative mesh for the plantlike
drawtype, and provide a bit of graphical variation in plants.
We enable this for wheat, using place_param2 = 3, which is the '#'
shaped plant mesh. If you would actually be able to give yourself
this plant in creative or through /give, you would also get the
same '#' shape.
Biomes:
Add 'sandstone desert', 'cold desert', 'snowy grassland'.
Rename 'glacier' biome to 'icesheet' biome.
Rename non-swamp 'swamp' biomes to 'shore' biomes.
Remove 'sandstone grassland' biome.
Rename 'stone grassland' biome to 'grassland' biome.
Edit biome points for improved similarity to Whittaker classification.
Change 'tundra' to bare stone with snowblocks.
Make dirt 'swamp' / 'shore' less deep.
Ores:
Make dirt blob ore biome-specific, limit to dirt biomes.
Decorations:
Make mushroom noise spread match that of appletrees as originally intended,
to have mushrooms spawn in darker thicker forest areas.
Add coral reefs in warm oceans.
Add bushes and acacia bushes.
Jungletrees in deeper water for larger swamps.
Register flower mod decorations in singlenode mapgen for use by
minetest.generate_registered_decorations, as in default/mapgen.lua.
Boats:
Previously, boats were not added to inventory in creative mode, fix.
In creative mode multiple boats will not be added to inventory.
Add comment.
Carts:
Set speed to 2 if punched by a non-player, to match the effect of a
player punch.
Add comments.
This is partly a workaround for a bug.
Climbs with continuous power rails were failing often due to
unexplained losses of speed leading to a reversal of direction.
The lack of acceleration on climbs meant that lost speed was not
regained.
Keeping cart speed at maximum on climbs helps reduce the chance of
reversals.
This also allows players to slowly accelerate up to full speed on a
climb without needing a horizontal run-up to reach full speed first.
It may not be possible to build the horizontal sections needed, or,
if players are replacing a previous carts mod their track
constructions, bridges, tunnels etc. will often not have the
horizontal sections needed.
Players will also sometimes need to place and enter a cart on a slope
and be able to climb.
- Improve arms attachment
The arm bones were at an angle, so that the bones were difficult
to orient correctly, as unintuitive combinations of angles
would be needed to get the default orientation, or any other
acceptable orientation. Moreover, a simple rotation of the arm,
e.g. forward, would require all angles to be adapted, instead
of just one.
The ends of the arms bones were moved from touching the body, to
the center of the arm, at an equal distance from the sides of the
arm and the shoulder; the arm bone is now in the center of the arm.
- Fix body rotation
The body was rotated 180° while the rest wasn't, leading to
strange results when setting bone positions manually.
- Fix default rotation of limbs (manually positioning them in
their default position would require an 180° rotation).
Is is not know how this was fixed. Maybe just because the
model was re-exported.
- The bone of the cape was moved to the center of the cape (it was
at the edge). For some reason this fixed the 180° rotation of the
cape when it was manually positioned (similar to previous issue).
The changes above fix most of the issues mentioned in #1376
- Add a player-model-specific workaround for the problem described in:
https://github.com/minetest/minetest/issues/2813#issuecomment-198796927https://github.com/minetest/minetest_game/pull/1392#issuecomment-261669915
During walking, attached tools would randomly switch hands. Walking also
happens to be the only animation where the body does not move. Making the
body move an imperceptible amount makes the issue disappear for the player
model.
- Fix body vertex group: it no longer includes parts of arms and legs
Thanks to @stujones11 for these last two changes.
This code adds the key concept to minetest_game, and integrates it
with lockable nodes. Currently supported lockable items are the Steel
Door, the Steel Trapdoor, and the Locked Chest.
The goal of this modification is to introduce a fine-grained multi-
player permission system that is intuitive and usable without any
console or chat commands, and doesn't require extra privileges to
be granted or setup. Keys can also physically be conveyed to other
players, adding to gameplay and adding some personality that is
preferable to console commands or editing formspecs.
A skeleton key can be crafted with 1 gold ingot. Skeleton keys can
then be matched to a lockable node by right-clicking the skeleton
key on a lockable node, which changes the skeleton key to a "key".
Gold was chosen as it's currently a not-so very useful item, and
therefore it's likely that players have some, but aren't really
using it for any purpose.
This key can subsequently used by any player to open or access that
lockable node, including retrieving items from Locked Chests, or
putting items in them.
They key is programmed to fit only the particular locked node it is
programmed to. This is achieved by storing a secret value in both
key and locked node. If this secret value doesn't match, the key
will not open the locked node. This allows many keys to be created
for one chest or door, but a key will only fit one node ever. The
secrets are stored in node, and item meta for the key.
If a locked node is removed, all keys that opened it are no longer
valid. Even if a new door/chest is placed in exactly the same spot,
the old keys will no longer fit that node.
Keys can be smelted back in gold ingots if they are no longer useful.
The method of storing a secret in nodemeta and itemstackmeta is secure
as there is no way for the client to create new items on the server
with a particular secret metadata value. Even if you could possible
create such an itemstack on the client, the server does not ever read
itemstackmeta from a client package.
The patch adds an API that allows other nodes and nodes added by
mods to use the same keys as well. The method how to implement this
is described in game_api.txt. The mod should add 2 callbacks to it's
node definition. Example code is given.
Textures are from PixelBOX, thanks to Gambit.
This merges the current state of the well-maintained and tested
`torches` mod as I've maintained it for the last 6 months.
This started out as a thorough cleanup of 3D torches by blockmen,
where some of the initial code still remains.
The models were redone entirely from scratch and have been extensively
tested with dozens of animated textures converted with mcimport,
and look a lot better than the original 3D Torches mod.
The ceiling torch is retained and functional. The `wieldlight`
addition that the torches mod has was removed, since it relies
on wieldview to look decent. This can stay external mod code.
I've opted to move the torch nodes to a separate file. It's not
a lot of code but nodes.lua is already huge, and I wanted to
retain the copyright header and some of the readme.txt notes,
and this was the easiest way of doing it.
This code passes "default:torch" to nodes with on_rightclick,
fixing problems with itemframes. Essentially it has a more
elaborate item_place() routine to make sure we're not passing
the wall torch to nodes that may display it.
The ceiling torch is a separate model and not the same as the
floor model. That does mean that there are 3 models in this
mod.
This is all the working code from SmallJoker's boost_cart, poored into
a more suitable form for minetest_game.
- Mesecons and moreores stuff was removed entirely.
- Textures were all renamed and moved out of default/
- Updated license, readme.txt, attribution
- Changed code license to MIT, left artwork at CC0
- removed default:rail and made aliases for it
- :carts:rail is now carts:rail.
- localized entity def
- removed copper rail entirely
- startstop rail was removed, as well as detector rail
- remodeled to b3d using stujones11 excellent blend model, but sizes
of cart adjusted to make pixel sizes consistent (0.625) everywhere.
- slightly more complex texture map for the cart (front/side visibly
different)
- rail parameters are passed as a separate def table, and stored in
a private list. This avoids having to call `get_meta` on every
node. In return, we need the node name, though.
- adds metal sounds (based on default metal sound function) and
cart moving sound.
- reduced cart speeds to max 7, 5 by pushing.
- Added on_step() rail event handler, gets called when a cart is on
a rail.
- Added various rebased updates from upstream (thanks Krock)
- Included a fix that removes the 'reverse jiggle' when stopping.
- Included reworked textures by sofar.
The mod namespace is still public, but I'm NOT declaring it an API. I'd
rather see it localized instead, for now. Any public interface in this
code is *experimental* at best, and should be considered non-stable and
unsupported for now.
Currently all minetest_game PR's are failing travis since the
upstream luacheck now also warns about whitespace issues, and
there are a few of those in the code. This fixes all of them
so we can yet again rely on luacheck.
With mip-mapping enabled, some GPUs cause a visual bug with indexed
textures that use alpha. This bug has been present for a while but
not noticed before. All indexed alpha textures must now be converted
to RGBA, to start this process we revert some textures converted to
indexed in the recent commit af3c918.
When placing boats, align the boat with the player's yaw.
Align drivers yaw with boat yaw when entering a boat, would previously turn
boat yaw by player's yaw + 90° to the right.
Make lava cooling ABM use a new group 'group:cools_lava'.
Nodes other than water can cool lava. We assume snowblock and ice melt,
turn to water and cool lava.
Leave 'group:water' present temporarily to not break mod liquids.
This fixes all cases where the color profile was broken, and
libpng warns about. It also makes almost all textures indexed
instead of RGB where possible (textures that don't have
semi-transparent pixels).
Fernando Carmona Varo
Auke Kok
rubenwardy
paramat
Dániel Juhász
upsilon
octacian
Thomas--S
MarkuBu
Alex Ford
LNJ
SmallJoker
zaoqi
cx384
SmallJoker
Fixer
tenplus1
Diego Martínez
Paramat
number Zero
Martin Doege
Lars Hofhansl
Baptiste Pouget
DS-Minetest
HybridDog
Napiophelios
Wuzzy
sfan5
Diego Martínez
Rogier
pilino1234
Auke Kok
Rui