Delete description.txt, update mod.conf (#9)

Co-authored-by: sys4 <bricassa@sys4.fr>

.github/workflows/luacheck.yml

@@ -0,0 +1,13 @@
+name: luacheck
+on: [push, pull_request]
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@master
+    - name: apt
+      run: sudo apt-get install -y luarocks
+    - name: luacheck install
+      run: luarocks install --local luacheck
+    - name: luacheck run
+      run: $HOME/.luarocks/bin/luacheck ./

.luacheckrc

@@ -0,0 +1,18 @@
+unused_args = false
+
+globals = {
+	"biome_lib"
+}
+
+read_globals = {
+	-- Stdlib
+	string = {fields = {"split", "trim"}},
+	table = {fields = {"copy"}},
+
+	-- Minetest
+	"minetest", "vector",
+	"dump", "PerlinNoise",
+
+	-- mods
+	"default",
+}

API.txt

@@ -26,7 +26,7 @@ biome_lib.register_active_spawner(sdelay, splant, sradius, schance, ssurface, sa
 
 This first function is an ABM-based spawner function originally created as
 part of Ironzorg's flowers mod.  It has since been largely extended and
-expanded.  There are two ways to call this function:  You can either pass it 
+expanded.  There are two ways to call this function:  You can either pass it
 several individual string and number parameters to use the legacy interface,
 or you can pass a single biome definition as a table, with all of your options
 spelled out nicely.  This is the preferred method.
@@ -135,7 +135,7 @@ biome = {
 						-- radius.  Defaults to 1 but is ignored if near_nodes
 						-- isn't set.  Bear in mind that the total area to be
 						-- checked is equal to:
-						-- (near_nodes_size^2)*near_nodes_vertical*2 
+						-- (near_nodes_size^2)*near_nodes_vertical*2
 						-- For example, if size is 10 and vertical is 4, then
 						-- the area is (10^2)*8 = 800 nodes in size, so you'll
 						-- want to make sure you specify a value appropriate
@@ -202,7 +202,7 @@ biome = {
 }
 
 [*] spawn_plants must be either a table or a string.  If it's a table, the
-values therein are treated as a list of nodenames to pick from randomly on 
+values therein are treated as a list of nodenames to pick from randomly on
 each application of the ABM code. The more nodes you can pack into this
 parameter to avoid making too many calls to this function, the lower the CPU
 load will likely be.
@@ -225,7 +225,7 @@ call this function with two parameters:  a table with your object's biome
 information, and a string, function, or table describing what to do if the
 engine finds a suitable surface node (see below).
 
-The biome table contains quite a number of options, though there are fewer 
+The biome table contains quite a number of options, though there are fewer
 here than are available in the ABM-based spawner, as some stuff doesn't make
 sense at map-generation time.
 
@@ -250,12 +250,21 @@ biome = {
 						-- skipped.  Avoid using excessively large radii.
 	rarity = num,		-- How rare should this object be in its biome? Larger
 						-- values make objects more rare, via:
-						-- math.random(1,100) > this
+						-- math.random() * 100 > this
+	rarity_fertility	-- The amount that the rarity is reduced by fertility.
+		= num,			-- This makes the rarity field the upper bound for
+						-- rarity, and (rarity - rarity_fertility) the lower
+						-- bound. Defaults to 0.
 	max_count = num,	-- The absolute maximum number of your object that
 						-- should be allowed to spawn in a 5x5x5 mapblock area
 						-- (80x80x80 nodes).  Defaults to 5, but be sure you
 						-- set this to some reasonable value depending on your
 						-- object and its size if 5 is insufficient.
+	tries = num,		-- the number of attempts that will be made to spawn
+						-- an object, defaults to 2. This means if the first
+						-- attempt fails due to something blocking the object
+						-- for example, another attempt will be made in
+						-- another random location.
 	seed_diff = num,	-- Perlin seed-diff value.  Defaults to 0, which
 						-- causes the function to inherit the global value of
 						-- 329.
@@ -341,7 +350,7 @@ definition table as the only parameter.  These are defined like so:
 
 options = {
 	label = string,		-- set this to identify the ABM for Minetest's
-						-- profiler.  If not set, biome_lib will set it to 
+						-- profiler.  If not set, biome_lib will set it to
 						-- "biome_lib.update_plant(): " appended with the node
 						-- in grow_plant (or the first item if it's a table)
 	grow_plant = "string" or {table}, -- Name(s) of the node(s) to be grown
@@ -406,7 +415,7 @@ If this value is set to a simple string, this is treated as the name of the
 function to use to grow the plant.  In this case, all of the usual growing
 code is executeed, but then instead of a plant being simply added to the
 world, grow_result is ignored and the named function is executed and passed a
-few parmeters in the following general form: 
+few parmeters in the following general form:
 
 	somefunction(pos, perlin1, perlin2)
 
@@ -431,7 +440,7 @@ search around the given position for a neighboring wall, returning the first
 one it finds as a facedir value, or nil if there are no adjacent walls.
 
 If randomflag is set to true, the function will just return the facedir of any
-random wall it finds adjacent to the target position.  Defaults to false if 
+random wall it finds adjacent to the target position.  Defaults to false if
 not specified.
 
 =====
@@ -463,7 +472,7 @@ spammy stuff.
 biome_lib.generate_ltree(pos, treemodel)
 biome_lib.grow_ltree(pos, treemodel)
 
-In the case of the growing code and the mapgen-based tree generator code, 
+In the case of the growing code and the mapgen-based tree generator code,
 generating a tree is done via the above two calls, which in turn immediately
 call the usual spawn_tree() functions.  This rerouting exists as a way for
 other mods to hook into biome_lib's tree-growing functions in general,
@@ -475,7 +484,7 @@ is to be placed.  'treemodel' is the standard L-Systems tree definition table
 expected by the spawn_tree() function.  Refer to the 'trunk' field in that
 table to derive the name of the tree being spawned.
 
-biome_lib.grow_ltree(pos, treemodel) does the same sort of thing whenever a 
+biome_lib.grow_ltree(pos, treemodel) does the same sort of thing whenever a
 tree is spawned within the abm-based growing code, for example when growing a
 sapling into a tree.
 
@@ -518,7 +527,7 @@ appears to be the standard now.  Those values are:
 	temperature_persistence = 0.5
 	temperature_scale = 150
 
-The way Perlin values are used by this mod, in keeping with the snow mod's 
+The way Perlin values are used by this mod, in keeping with the snow mod's
 apparent methods, larger values returned by the Perlin function represent
 *colder* temperatures.  In this mod, the following table gives a rough
 approximation of how temperature maps to these values, normalized to
@@ -542,7 +551,7 @@ Perlin		Approx. Temperature
 
 Included in this table are even 0.25 steps in Perlin values along with some
 common temperatures on both the Centigrade and Fahrenheit scales.  Note that
-unless you're trying to model the Moon or perhaps Mercury in your mods/maps, 
+unless you're trying to model the Moon or perhaps Mercury in your mods/maps,
 you probably won't need to bother with Perlin values of less than -0.56 or so.
 
 

api.lua

@@ -14,16 +14,6 @@ biome_lib.fertile_perlin_octaves = 3
 biome_lib.fertile_perlin_persistence = 0.6
 biome_lib.fertile_perlin_scale = 100
 
-local temperature_seeddiff = 112
-local temperature_octaves = 3
-local temperature_persistence = 0.5
-local temperature_scale = 150
-
-local humidity_seeddiff = 9130
-local humidity_octaves = 3
-local humidity_persistence = 0.5
-local humidity_scale = 250
-
 local time_speed = tonumber(minetest.settings:get("time_speed"))
 biome_lib.time_scale = 1
 
@@ -35,19 +25,11 @@ biome_lib.air = {name = "air"}
 
 -- the mapgen rarely creates useful surfaces outside this range, but mods can
 -- still specify a wider range if needed.
-biome_lib.mapgen_elevation_limit = { ["min"] = -16, ["max"] = 48 } 
+biome_lib.mapgen_elevation_limit = { ["min"] = -16, ["max"] = 48 }
 
---PerlinNoise(seed, octaves, persistence, scale)
-
-biome_lib.perlin_temperature = PerlinNoise(temperature_seeddiff, temperature_octaves, temperature_persistence, temperature_scale)
-biome_lib.perlin_humidity = PerlinNoise(humidity_seeddiff, humidity_octaves, humidity_persistence, humidity_scale)
 
 -- Local functions
 
-local function tableize(s)
-	return string.split(string.trim(string.gsub(s, " ", "")))
-end
-
 function biome_lib.dbg(msg, level)
 	local l = tonumber(level) or 0
 	if biome_lib.debug_log_level >= l then
@@ -59,17 +41,10 @@ end
 local function get_biome_data(pos, perlin_fertile)
 	local fertility = perlin_fertile:get_2d({x=pos.x, y=pos.z})
 
-	if type(minetest.get_biome_data) == "function" then
-		local data = minetest.get_biome_data(pos)
-		if data then
-			return fertility, data.heat / 100, data.humidity / 100
-		end
-	end
-
-	local temperature = biome_lib.perlin_temperature:get2d({x=pos.x, y=pos.z})
-	local humidity = biome_lib.perlin_humidity:get2d({x=pos.x+150, y=pos.z+50})
-
-	return fertility, temperature, humidity
+	local data = minetest.get_biome_data(pos)
+	-- Original values this method returned were +1 (lowest) to -1 (highest)
+	-- so we need to convert the 0-100 range from get_biome_data() to that.
+	return fertility, 1 - (data.heat / 100 * 2), 1 - (data.humidity / 100 * 2)
 end
 
 function biome_lib.is_node_loaded(node_pos)
@@ -98,7 +73,9 @@ function biome_lib.set_defaults(biome)
 	biome.near_nodes_size = biome.near_nodes_size or 0
 	biome.near_nodes_count = biome.near_nodes_count or 1
 	biome.rarity = biome.rarity or 50
+	biome.rarity_fertility = biome.rarity_fertility or 0
 	biome.max_count = biome.max_count or 125
+	biome.tries = biome.tries or 2
 	if biome.check_air ~= false then biome.check_air = true end
 
 -- specific to abm spawner
@@ -122,19 +99,21 @@ end
 
 function biome_lib.register_on_generate(biomedef, nodes_or_function_or_model)
 
-	-- if calling code passes an undefined node for a surface or 
+	-- if calling code passes an undefined node for a surface or
 	-- as a node to be spawned, don't register an action for it.
 
 	if type(nodes_or_function_or_model) == "string"
 	  and string.find(nodes_or_function_or_model, ":")
 	  and not minetest.registered_nodes[nodes_or_function_or_model] then
-		biome_lib.dbg("Warning: Ignored registration for undefined spawn node: "..dump(nodes_or_function_or_model), 2)
+		biome_lib.dbg("Warning: Ignored registration for undefined spawn node: "..
+				dump(nodes_or_function_or_model), 2)
 		return
 	end
 
 	if type(nodes_or_function_or_model) == "string"
 	  and not string.find(nodes_or_function_or_model, ":") then
-		biome_lib.dbg("Warning: Registered function call using deprecated string method: "..dump(nodes_or_function_or_model), 2)
+		biome_lib.dbg("Warning: Registered function call using deprecated string method: "..
+				dump(nodes_or_function_or_model), 2)
 	end
 
 	biome_lib.mapgen_elevation_limit.min = math.min(biomedef.min_elevation or 0, biome_lib.mapgen_elevation_limit.min)
@@ -143,13 +122,14 @@ function biome_lib.register_on_generate(biomedef, nodes_or_function_or_model)
 	local decor_def = biome_lib.can_use_decorations(biomedef, nodes_or_function_or_model)
 
 	if decor_def then
-		biome_lib.dbg("Using engine decorations instead of biome_lib functions for node(s): "..dump(nodes_or_function_or_model), 3)
+		biome_lib.dbg("Using engine decorations instead of biome_lib functions for node(s): "..
+				dump(nodes_or_function_or_model), 3)
 		biome_lib.registered_decorations[#biome_lib.registered_decorations + 1] = nodes_or_function_or_model
 		minetest.register_decoration(decor_def)
 		return
-	elseif biomedef.check_air == false then 
+	elseif biomedef.check_air == false then
 		biome_lib.dbg("Register no-air-check mapgen hook: "..dump(nodes_or_function_or_model), 3)
-		biome_lib.actionslist_no_aircheck[#biome_lib.actionslist_no_aircheck + 1] = { biomedef, nodes_or_function_or_model }
+		biome_lib.actionslist_no_aircheck[#biome_lib.actionslist_no_aircheck + 1] = {biomedef, nodes_or_function_or_model}
 		local s = biomedef.surface
 		if type(s) == "string" then
 			if s and (string.find(s, "^group:") or minetest.registered_nodes[s]) then
@@ -161,7 +141,7 @@ function biome_lib.register_on_generate(biomedef, nodes_or_function_or_model)
 			end
 		else
 			for i = 1, #biomedef.surface do
-				local s = biomedef.surface[i]
+				s = biomedef.surface[i]
 				if s and (string.find(s, "^group:") or minetest.registered_nodes[s]) then
 					if not search_table(biome_lib.surfaceslist_no_aircheck, s) then
 						biome_lib.surfaceslist_no_aircheck[#biome_lib.surfaceslist_no_aircheck + 1] = s
@@ -185,7 +165,7 @@ function biome_lib.register_on_generate(biomedef, nodes_or_function_or_model)
 			end
 		else
 			for i = 1, #biomedef.surface do
-				local s = biomedef.surface[i]
+				s = biomedef.surface[i]
 				if s and (string.find(s, "^group:") or minetest.registered_nodes[s]) then
 					if not search_table(biome_lib.surfaceslist_aircheck, s) then
 						biome_lib.surfaceslist_aircheck[#biome_lib.surfaceslist_aircheck + 1] = s
@@ -204,17 +184,21 @@ end
 local function populate_single_surface(biome, pos, perlin_fertile_area, checkair)
 	local p_top = { x = pos.x, y = pos.y + 1, z = pos.z }
 
-	if math.random(1, 100) <= biome.rarity then
+	if biome.rarity - biome.rarity_fertility == 100 then
 		return
 	end
 
 	local fertility, temperature, humidity = get_biome_data(pos, perlin_fertile_area)
 
+	if math.random() * 100 <= (biome.rarity - ((fertility + 1) / 2 * biome.rarity_fertility)) then
+		return
+	end
+
 	local pos_biome_ok = pos.y >= biome.min_elevation and pos.y <= biome.max_elevation
-		and fertility > biome.plantlife_limit
+		and fertility >= biome.plantlife_limit
 		and temperature <= biome.temp_min and temperature >= biome.temp_max
 		and humidity <= biome.humidity_min and humidity >= biome.humidity_max
-	
+
 	if not pos_biome_ok then
 		return -- Y position mismatch, outside of biome
 	end
@@ -229,7 +213,7 @@ local function populate_single_surface(biome, pos, perlin_fertile_area, checkair
 		else
 			if string.find(biome_surfaces_string, "group:") then
 				for j = 1, #biome.surface do
-					if string.find(biome.surface[j], "^group:") 
+					if string.find(biome.surface[j], "^group:")
 					  and minetest.get_item_group(dest_node.name, biome.surface[j]) then
 						surface_ok = true
 						break
@@ -241,7 +225,7 @@ local function populate_single_surface(biome, pos, perlin_fertile_area, checkair
 			minetest.get_node({ x = pos.x, y = pos.y-biome.depth-1, z = pos.z }).name) then
 		surface_ok = true
 	end
-	
+
 	if not surface_ok then
 		return -- Surface does not match the given node group/name
 	end
@@ -269,7 +253,7 @@ local function populate_single_surface(biome, pos, perlin_fertile_area, checkair
 	if biome.near_nodes and
 			#minetest.find_nodes_in_area(
 				{x=pos.x-biome.near_nodes_size, y=pos.y-biome.near_nodes_vertical, z=pos.z-biome.near_nodes_size},
-				{x=pos.x+biome.near_nodes_size, y=pos.y+biome.near_nodes_vertical, z=pos.z+biome.near_nodes_size}, 
+				{x=pos.x+biome.near_nodes_size, y=pos.y+biome.near_nodes_vertical, z=pos.z+biome.near_nodes_size},
 				biome.near_nodes
 			) < biome.near_nodes_count then
 		return -- Long distance neighbours do not match
@@ -287,7 +271,8 @@ function biome_lib.populate_surfaces(b, nodes_or_function_or_model, snodes, chec
 	-- filter stage 1 - find nodes from the supplied surfaces that are within the current biome.
 
 	local in_biome_nodes = {}
-	local perlin_fertile_area = minetest.get_perlin(biome.seed_diff, biome_lib.fertile_perlin_octaves, biome_lib.fertile_perlin_persistence, biome_lib.fertile_perlin_scale)
+	local perlin_fertile_area = minetest.get_perlin(biome.seed_diff, biome_lib.fertile_perlin_octaves,
+			biome_lib.fertile_perlin_persistence, biome_lib.fertile_perlin_scale)
 
 	for i = 1, #snodes do
 		local pos = vector.new(snodes[i])
@@ -307,14 +292,36 @@ function biome_lib.populate_surfaces(b, nodes_or_function_or_model, snodes, chec
 	for i = 1, math.min(math.ceil(biome.max_count/25), num_in_biome_nodes) do
 		local tries = 0
 		local spawned = false
-		while tries < 2 and not spawned do
+		while tries < biome.tries and not spawned do
 			local pos = in_biome_nodes[math.random(1, num_in_biome_nodes)]
-			if biome.spawn_replace_node then
+
+			local will_place = true
+			local fdir = nil
+			if biome.random_facedir then
+				fdir = math.random(biome.random_facedir[1], biome.random_facedir[2])
+			end
+
+			if biome.spawn_on_side then
+				local onside = biome_lib.find_open_side(pos)
+				if onside then
+					pos = onside.newpos
+					fdir = onside.facedir
+				else
+					will_place = false
+				end
+			elseif biome.spawn_on_bottom then
+				if minetest.get_node({x=pos.x, y=pos.y-1, z=pos.z}).name == "air" then
+					pos.y = pos.y - 1
+				else
+					will_place = false
+				end
+			elseif biome.spawn_replace_node then
 				pos.y = pos.y-1
 			end
+
 			local p_top = { x = pos.x, y = pos.y + 1, z = pos.z }
 
-			if not (biome.avoid_nodes and biome.avoid_radius
+			if will_place and not (biome.avoid_nodes and biome.avoid_radius
 					and minetest.find_node_near(p_top, biome.avoid_radius
 					+ math.random(-1.5,2), biome.avoid_nodes)) then
 				if biome.delete_above then
@@ -346,34 +353,30 @@ function biome_lib.populate_surfaces(b, nodes_or_function_or_model, snodes, chec
 						biome_lib.dbg("An L-tree was spawned at "..minetest.pos_to_string(p_top), 4)
 						spawned = true
 					else
-						local fdir = nil
-						if biome.random_facedir then
-							fdir = math.random(biome.random_facedir[1], biome.random_facedir[2])
-						end
 						local n=nodes_or_function_or_model[math.random(#nodes_or_function_or_model)]
 						minetest.swap_node(p_top, { name = n, param2 = fdir })
-						biome_lib.dbg("Node \""..n.."\" was randomly picked from a list and placed at "..minetest.pos_to_string(p_top), 4)
+						biome_lib.dbg("Node \""..n.."\" was randomly picked from a list and placed at "..
+								minetest.pos_to_string(p_top), 4)
 						spawned = true
 					end
 				elseif objtype == "string" and
 				  minetest.registered_nodes[nodes_or_function_or_model] then
-					local fdir = nil
-					if biome.random_facedir then
-						fdir = math.random(biome.random_facedir[1], biome.random_facedir[2])
-					end
 					minetest.swap_node(p_top, { name = nodes_or_function_or_model, param2 = fdir })
-					biome_lib.dbg("Node \""..nodes_or_function_or_model.."\" was placed at "..minetest.pos_to_string(p_top), 4)
+					biome_lib.dbg("Node \""..nodes_or_function_or_model.."\" was placed at "..
+							minetest.pos_to_string(p_top), 4)
 					spawned = true
 				elseif objtype == "function" then
-					nodes_or_function_or_model(pos)
+					nodes_or_function_or_model(pos, fdir)
 					biome_lib.dbg("A function was run on surface node at "..minetest.pos_to_string(pos), 4)
 					spawned = true
 				elseif objtype == "string" and pcall(loadstring(("return %s(...)"):
 					format(nodes_or_function_or_model)),pos) then
 					spawned = true
-					biome_lib.dbg("An obsolete string-specified function was run on surface node at "..minetest.pos_to_string(p_top), 4)
+					biome_lib.dbg("An obsolete string-specified function was run on surface node at "..
+							minetest.pos_to_string(p_top), 4)
 				else
-					biome_lib.dbg("Warning: Ignored invalid definition for object "..dump(nodes_or_function_or_model).." that was pointed at {"..dump(pos).."}", 2)
+					biome_lib.dbg("Warning: Ignored invalid definition for object "..
+							dump(nodes_or_function_or_model).." that was pointed at {"..dump(pos).."}", 2)
 				end
 			else
 				tries = tries + 1
@@ -393,7 +396,7 @@ local function confirm_block_surroundings(p)
 	for x = -32,32,64 do -- step of 64 causes it to only check the 8 corner blocks
 		for y = -32,32,64 do
 			for z = -32,32,64 do
-				local n=minetest.get_node_or_nil({x=p.x + x, y=p.y + y, z=p.z + z})
+				n = minetest.get_node_or_nil({x=p.x + x, y=p.y + y, z=p.z + z})
 				if not n or n.name == "ignore" then return false end
 			end
 		end
@@ -427,7 +430,6 @@ function biome_lib.generate_block(shutting_down)
 	local minp =		blocklog[1][1]
 	local maxp =		blocklog[1][2]
 	local airflag = 	blocklog[1][3]
-	local pos_hash = 	minetest.hash_node_position(minp)
 
 	if not biome_lib.pos_hash then -- we need to read the maplock and get the surfaces list
 		local now = minetest.get_us_time()
@@ -435,7 +437,8 @@ function biome_lib.generate_block(shutting_down)
 		minetest.load_area(minp)
 		if not confirm_block_surroundings(minp)
 		  and not shutting_down
-		  and (blocklog[1][4] + biome_lib.block_timeout) > now then -- if any neighbors appear not to be loaded and the block hasn't expired yet, defer it
+			-- if any neighbors appear not to be loaded and the block hasn't expired yet, defer it
+		  and (blocklog[1][4] + biome_lib.block_timeout) > now then
 
 			if biome_lib.run_block_recheck_list then
 				biome_lib.block_log[#biome_lib.block_log + 1] = table.copy(biome_lib.block_recheck_list[1])
@@ -542,9 +545,10 @@ function biome_lib.register_active_spawner(sd,sp,sr,sc,ss,sa)
 		neighbors = biome.neighbors,
 		label = biome.label,
 		action = function(pos, node, active_object_count, active_object_count_wider)
-			local p_top = { x = pos.x, y = pos.y + 1, z = pos.z }	
+			local p_top = { x = pos.x, y = pos.y + 1, z = pos.z }
 			local n_top = minetest.get_node(p_top)
-			local perlin_fertile_area = minetest.get_perlin(biome.seed_diff, biome_lib.fertile_perlin_octaves, biome_lib.fertile_perlin_persistence, biome_lib.fertile_perlin_scale)
+			local perlin_fertile_area = minetest.get_perlin(biome.seed_diff, biome_lib.fertile_perlin_octaves,
+					biome_lib.fertile_perlin_persistence, biome_lib.fertile_perlin_scale)
 
 			local fertility, temperature, humidity = get_biome_data(pos, perlin_fertile_area)
 
@@ -654,12 +658,14 @@ function biome_lib.replace_plant(pos, replacement, grow_function, walldir, seedd
 		biome_lib.grow_ltree(pos, grow_function)
 		return
 	elseif growtype == "function" then
-		local perlin_fertile_area = minetest.get_perlin(seeddiff, biome_lib.fertile_perlin_octaves, biome_lib.fertile_perlin_persistence, biome_lib.fertile_perlin_scale)
+		local perlin_fertile_area = minetest.get_perlin(seeddiff, biome_lib.fertile_perlin_octaves,
+				biome_lib.fertile_perlin_persistence, biome_lib.fertile_perlin_scale)
 		local fertility, temperature, _ = get_biome_data(pos, perlin_fertile_area)
 		grow_function(pos, fertility, temperature, walldir)
 		return
 	elseif growtype == "string" then
-		local perlin_fertile_area = minetest.get_perlin(seeddiff, biome_lib.fertile_perlin_octaves, biome_lib.fertile_perlin_persistence, biome_lib.fertile_perlin_scale)
+		local perlin_fertile_area = minetest.get_perlin(seeddiff, biome_lib.fertile_perlin_octaves,
+				biome_lib.fertile_perlin_persistence, biome_lib.fertile_perlin_scale)
 		local fertility, temperature, _ = get_biome_data(pos, perlin_fertile_area)
 		assert(loadstring(grow_function.."(...)"))(pos, fertility, temperature, walldir)
 		return

block_queue_checks.lua

@@ -108,7 +108,8 @@ minetest.register_on_generated(function(minp, maxp, blockseed)
 				end
 			end
 		else
-			biome_lib.dbg("Did not enqueue mapblocks at elevation "..miny.."m, they're out of range of any generate_plant() calls.", 4)
+			biome_lib.dbg("Did not enqueue mapblocks at elevation "..miny..
+					"m, they're out of range of any generate_plant() calls.", 4)
 		end
 	end
 	biome_lib.run_block_recheck_list = true

compat.lua

@@ -81,7 +81,7 @@ function biome_lib.can_use_decorations(b, nodes_or_function_or_treedef)
 		["y_min"] = biome.min_elevation,
 		["y_max"] = biome.max_elevation,
 		["spawn_by"] = biome.near_nodes,
-		["num_spawn_by"] = biome.near_nodes and biome.near_nodes_count, 
+		["num_spawn_by"] = biome.near_nodes and biome.near_nodes_count,
 	}
 
 	local r = (100-biome.rarity)/100

description.txt

@@ -1 +0,0 @@
-The biome spawning and management library for Plantlife, Moretrees, Tiny Trees, and other mods that originally depended on plants_lib from the plantlife modpack.

growth.lua

@@ -48,7 +48,6 @@ function biome_lib.update_plant(opts)
 			local p_bot = {x=pos.x, y=pos.y-1, z=pos.z}
 			local n_top = minetest.get_node(p_top)
 			local n_bot = minetest.get_node(p_bot)
-			local root_node = minetest.get_node({x=pos.x, y=pos.y-options.height_limit, z=pos.z})
 			local walldir = nil
 			if options.need_wall and options.verticals_list then
 				walldir = biome_lib.find_adjacent_wall(p_top, options.verticals_list, options.choose_random_wall)

init.lua

@@ -7,18 +7,9 @@
 biome_lib = {}
 biome_lib.modpath = minetest.get_modpath("biome_lib")
 
--- Boilerplate to support localized strings if intllib mod is installed.
-local S
-if minetest.global_exists("intllib") then
-	if intllib.make_gettext_pair then
-		S = intllib.make_gettext_pair()
-	else
-		S = intllib.Getter()
-	end
-else
-	S = function(s) return s end
+local function tableize(s)
+	return string.split(string.trim(string.gsub(s, " ", "")))
 end
-biome_lib.intllib = S
 
 local c1 = minetest.settings:get("biome_lib_default_grow_through_nodes")
 biome_lib.default_grow_through_nodes = {["air"] = true}
@@ -85,15 +76,18 @@ minetest.after(0.01, function()
 	biome_lib.dbg("All mapgen registrations completed.", 0)
 
 	if n > 0 then
-		biome_lib.dbg("Total items/actions to handle manually: "..n.." ("..#biome_lib.actionslist_no_aircheck.." without air checks)", 0)
-		biome_lib.dbg("Total surface types to handle manually: "..#biome_lib.surfaceslist_aircheck + #biome_lib.surfaceslist_no_aircheck, 0)
+		biome_lib.dbg("Total items/actions to handle manually: "..n..
+				" ("..#biome_lib.actionslist_no_aircheck.." without air checks)", 0)
+		biome_lib.dbg("Total surface types to handle manually: "
+				..#biome_lib.surfaceslist_aircheck + #biome_lib.surfaceslist_no_aircheck, 0)
 	else
 		biome_lib.dbg("There are no \"handle manually\" items/actions registered,", 0)
-		biome_lib.dbg("so the mapblock queue will not be not used this session.", 0)
+		biome_lib.dbg("so the mapblock queue will not be used this session.", 0)
 	end
 
 	biome_lib.dbg("Items sent to the engine's decorations handler: "..#biome_lib.registered_decorations, 0)
-	biome_lib.dbg("Elevation range: "..biome_lib.mapgen_elevation_limit.min.." to "..string.format("%+d", biome_lib.mapgen_elevation_limit.max).." meters.", 0)
+	biome_lib.dbg("Elevation range: "..biome_lib.mapgen_elevation_limit.min.." to "..
+			string.format("%+d", biome_lib.mapgen_elevation_limit.max).." meters.", 0)
 
 	if n > 0 then
 		dofile(biome_lib.modpath .. "/block_queue_checks.lua")

locale/de.txt

@@ -1,5 +0,0 @@
-# Translation by Xanthin
-
-someone = jemand
-Sorry, %s owns that spot. = Entschuldige, %s gehoert diese Stelle.
-[Plantlife Library] Loaded = [Plantlife Library] Geladen

locale/fr.txt

@@ -1,5 +0,0 @@
-# Template
-
-someone = quelqu'un
-Sorry, %s owns that spot. = Désolé, %s possède cet endroit.
-[Plantlife Library] Loaded = [Librairie Plantlife] Chargée.

locale/ru.txt

@@ -1,5 +0,0 @@
-# Translation by inpos
-
-someone = кто-то 
-Sorry, %s owns that spot. = Извините, но %s уже является владельцем этой точки.
-[Plantlife Library] Loaded = [Plantlife Library] Загружена

locale/template.txt

@@ -1,5 +0,0 @@
-# Template
-
-someone = 
-Sorry, %s owns that spot. = 
-[Plantlife Library] Loaded = 

locale/tr.txt

@@ -1,5 +0,0 @@
-# Turkish translation by mahmutelmas06
-
-someone = birisi
-Sorry, %s owns that spot. = Üzgünüm, buranın sahibi %s.
-[Plantlife Library] Loaded = [Plantlife Library] yüklendi

mod.conf

@@ -1,3 +1,5 @@
 name = biome_lib
+title = Biome Library
+description = The biome spawning and management library for Plantlife, Moretrees, Tiny Trees, and other mods that originally depended on plants_lib from the plantlife modpack.
+optional_depends = default
 min_minetest_version = 5.2.0
-optional_depends = default, intllib

search_functions.lua

@@ -6,7 +6,7 @@ function biome_lib.find_adjacent_wall(pos, verticals, randomflag)
 	local verts = dump(verticals)
 	if randomflag then
 		local walltab = {}
-		
+
 		if string.find(verts, minetest.get_node({ x=pos.x-1, y=pos.y, z=pos.z   }).name) then walltab[#walltab + 1] = 3 end
 		if string.find(verts, minetest.get_node({ x=pos.x+1, y=pos.y, z=pos.z   }).name) then walltab[#walltab + 1] = 2 end
 		if string.find(verts, minetest.get_node({ x=pos.x  , y=pos.y, z=pos.z-1 }).name) then walltab[#walltab + 1] = 5 end