Added settings for margin, and documented in settingtypes.txt

Elevation gets closer to -50 when approaching the border

CHANGELOG.md

@@ -1,18 +0,0 @@
-CHANGELOG
-=========
-
-## `v1.0.2` (2022-01-10)
-- Use builtin logging system and appropriate loglevels
-- Skip empty chunks, when generating high above ground (~20% speedup)
-- Minor optimizations (turning global variables to local...)
-
-## `v1.0.1` (2021-09-14)
-- Automatically switch to `singlenode` mapgen at init time
-
-## `v1.0` (2021-08-01)
-- Rewritten pregen code (terrainlib) in pure Lua
-- Optimized grid loading
-- Load grid nodes on request by default
-- Changed river width settings
-- Added map size in settings
-- Added logs

README.md

@@ -1,5 +1,5 @@
 # Map Generator with Rivers
-`mapgen_rivers v1.0.2` by Gaël de Sailly.
+`mapgen_rivers v1.0.1` by Gaël de Sailly.
 
 Semi-procedural map generator for Minetest 5.x. It aims to create realistic and nice-looking landscapes for the game, focused on river networks. It is based on algorithms modelling water flow and river erosion at a broad scale, similar to some used by researchers in Earth Sciences. It is taking some inspiration from [Fastscape](https://github.com/fastscape-lem/fastscape).
 
@@ -13,11 +13,10 @@ It used to be composed of a Python script doing pre-generation, and a Lua mod re
 License: GNU LGPLv3.0
 
 Code: Gaël de Sailly
-
 Flow routing algorithm concept (in `terrainlib/rivermapper.lua`): Cordonnier, G., Bovy, B., & Braun, J. (2019). A versatile, linear complexity algorithm for flow routing in topographies with depressions. Earth Surface Dynamics, 7(2), 549-562.
 
 # Requirements
-No required dependency, but [`biomegen`](https://gitlab.com/gaelysam/biomegen) recommended (provides biome system).
+Mod dependencies: `default` required, and [`biomegen`](https://github.com/Gael-de-Sailly/biomegen) optional (provides biome system).
 
 # Installation
 This mod should be placed in the `mods/` directory of Minetest like any other mod.

heightmap.lua

@@ -6,7 +6,7 @@ local transform_quadri = dofile(modpath .. 'geometry.lua')
 local sea_level = mapgen_rivers.settings.sea_level
 local riverbed_slope = mapgen_rivers.settings.riverbed_slope * mapgen_rivers.settings.blocksize
 
-local MAP_BOTTOM = -31000
+local out_elev = mapgen_rivers.settings.margin_elev
 
 -- Localize for performance
 local floor, min, max = math.floor, math.min, math.max
@@ -46,57 +46,50 @@ local function heightmaps(minp, maxp)
 				-- = 0: on riverbank
 				-- > 0: inside river
 				local depth_factors = {
-					r_west  -    xf , -- West edge (1)
+					r_west - xf,
-					r_north -    zf , -- North edge (2)
+					r_north - zf,
-					r_east  - (1-xf), -- East edge (3)
+					xf - r_east,
-					r_south - (1-zf), -- South edge (4)
+					zf - r_south,
-					c_NW -    xf  -    zf , -- North-West corner (5)
+					c_NW-xf-zf,
-					c_NE - (1-xf) -    zf , -- North-East corner (6)
+					xf-zf-c_NE,
-					c_SE - (1-xf) - (1-zf), -- South-East corner (7)
+					xf+zf-c_SE,
-					c_SW -    xf  - (1-zf), -- South-West corner (8)
+					zf-xf-c_SW,
 				}
 
-				-- Find the maximal depth factor, which determines to which of the 8 river sections (4 edges + 4 corners) the current point belongs.
+				-- Find the maximal depth factor and determine to which river it belongs
-				-- If imax is still at 0, it means that we are not in a river.
+				local depth_factor_max = 0
-				local dpmax = 0
 				local imax = 0
 				for i=1, 8 do
-					if depth_factors[i] > dpmax then
+					if depth_factors[i] >= depth_factor_max then
-						dpmax = depth_factors[i]
+						depth_factor_max = depth_factors[i]
 						imax = i
 					end
 				end
 
-				-- Transform the coordinates to have xfc and zfc = 0 or 1 in rivers (to avoid rivers having lateral slope and to accomodate the riverbanks smoothly)
+				-- Transform the coordinates to have xf and zf = 0 or 1 in rivers (to avoid rivers having lateral slope and to accomodate the surrounding smoothly)
-				local xfc, zfc
+				if imax == 0 then
-				-- xfc:
+					local x0 = max(r_west, c_NW-zf, zf-c_SW)
-				if imax == 0 or imax == 2 or imax == 4 then -- river segment does not constrain X coordinate, so accomodate xf in function of other river sections
+					local x1 = min(r_east, c_NE+zf, c_SE-zf)
-					local x0 =   max(r_west-dpmax, c_NW-zf-dpmax, c_SW-(1-zf)-dpmax, 0) -- new xf will be bounded to 0 by western riverbank
+					local z0 = max(r_north, c_NW-xf, xf-c_NE)
-					local x1 = 1-max(r_east-dpmax, c_NE-zf-dpmax, c_SE-(1-zf)-dpmax, 0) -- and bounded to 1 by eastern riverbank
+					local z1 = min(r_south, c_SW+xf, c_SE-xf)
-					if x0 >= x1 then
+					xf = (xf-x0) / (x1-x0)
-						xfc = 0.5
+					zf = (zf-z0) / (z1-z0)
-					else
+				elseif imax == 1 then
-						xfc = (xf-x0) / (x1-x0)
+					xf = 0
-					end
+				elseif imax == 2 then
-				elseif imax == 1 or imax == 5 or imax == 8 then -- river at the western side of the polygon
+					zf = 0
-					xfc = 0
+				elseif imax == 3 then
-				else -- 3, 6, 7 : river at the eastern side of the polygon
+					xf = 1
-					xfc = 1
+				elseif imax == 4 then
-				end
+					zf = 1
-
+				elseif imax == 5 then
-				-- Same for zfc:
+					xf, zf = 0, 0
-				if imax == 0 or imax == 1 or imax == 3 then -- river segment does not constrain Z coordinate, so accomodate zf in function of other river sections
+				elseif imax == 6 then
-					local z0 =   max(r_north-dpmax, c_NW-xf-dpmax, c_NE-(1-xf)-dpmax, 0) -- new zf will be bounded to 0 by northern riverbank
+					xf, zf = 1, 0
-					local z1 = 1-max(r_south-dpmax, c_SW-xf-dpmax, c_SE-(1-xf)-dpmax, 0) -- and bounded to 1 by southern riverbank
+				elseif imax == 7 then
-					if z0 >= z1 then
+					xf, zf = 1, 1
-						zfc = 0.5
+				elseif imax == 8 then
-					else
+					xf, zf = 0, 1
-						zfc = (zf-z0) / (z1-z0)
-					end
-				elseif imax == 2 or imax == 5 or imax == 6 then -- river at the northern side of the polygon
-					zfc = 0
-				else -- 4, 7, 8 : river at the southern side of the polygon
-					zfc = 1
 				end
 
 				-- Determine elevation by interpolation
@@ -106,12 +99,12 @@ local function heightmaps(minp, maxp)
 					vdem[2],
 					vdem[3],
 					vdem[4],
-					xfc, zfc
+					xf, zf
 				))
 
 				-- Spatial gradient of the interpolation
-				local slope_x = zfc*(vdem[3]-vdem[4]) + (1-zfc)*(vdem[2]-vdem[1]) < 0
+				local slope_x = zf*(vdem[3]-vdem[4]) + (1-zf)*(vdem[2]-vdem[1]) < 0
-				local slope_z = xfc*(vdem[3]-vdem[2]) + (1-xfc)*(vdem[4]-vdem[1]) < 0
+				local slope_z = xf*(vdem[3]-vdem[2]) + (1-xf)*(vdem[4]-vdem[1]) < 0
 				local lake_id = 0
 				if slope_x then
 					if slope_z then
@@ -128,15 +121,15 @@ local function heightmaps(minp, maxp)
 				end
 				local lake_height = max(floor(poly.lake[lake_id]), terrain_height)
 
-				if imax > 0 and dpmax > 0 then
+				if imax > 0 and depth_factor_max > 0 then
-					terrain_height = min(max(lake_height, sea_level) - floor(1+dpmax*riverbed_slope), terrain_height)
+					terrain_height = min(max(lake_height, sea_level) - floor(1+depth_factor_max*riverbed_slope), terrain_height)
 				end
 
 				terrain_height_map[i] = terrain_height
 				lake_height_map[i] = lake_height
 			else
-				terrain_height_map[i] = MAP_BOTTOM
+				terrain_height_map[i] = out_elev
-				lake_height_map[i] = MAP_BOTTOM
+				lake_height_map[i] = out_elev
 			end
 			i = i + 1
 		end

init.lua

@@ -16,7 +16,7 @@ local elevation_chill = mapgen_rivers.settings.elevation_chill
 local use_distort = mapgen_rivers.settings.distort
 local use_biomes = mapgen_rivers.settings.biomes
 local use_biomegen_mod = use_biomes and minetest.global_exists('biomegen')
-use_biomes = use_biomes and minetest.global_exists('default') and not use_biomegen_mod
+use_biomes = use_biomes and not use_biomegen_mod
 
 if use_biomegen_mod then
 	biomegen.set_elevation_chill(elevation_chill)
@@ -147,19 +147,15 @@ local function generate(minp, maxp, seed)
 		end
 	end
 
-	local c_stone = minetest.get_content_id("mapgen_stone")
+	local c_stone = minetest.get_content_id("default:stone")
-	local c_water = minetest.get_content_id("mapgen_water_source")
+	local c_dirt = minetest.get_content_id("default:dirt")
-	local c_rwater = minetest.get_content_id("mapgen_river_water_source")
+	local c_lawn = minetest.get_content_id("default:dirt_with_grass")
-
+	local c_dirtsnow = minetest.get_content_id("default:dirt_with_snow")
-	local c_dirt, c_lawn, c_dirtsnow, c_snow, c_sand, c_ice
+	local c_snow = minetest.get_content_id("default:snowblock")
-	if use_biomes then
+	local c_sand = minetest.get_content_id("default:sand")
-		c_dirt = minetest.get_content_id("default:dirt")
+	local c_water = minetest.get_content_id("default:water_source")
-		c_lawn = minetest.get_content_id("default:dirt_with_grass")
+	local c_rwater = minetest.get_content_id("default:river_water_source")
-		c_dirtsnow = minetest.get_content_id("default:dirt_with_snow")
+	local c_ice = minetest.get_content_id("default:ice")
-		c_snow = minetest.get_content_id("default:snowblock")
-		c_sand = minetest.get_content_id("default:sand")
-		c_ice = minetest.get_content_id("default:ice")
-	end
 
 	local vm, emin, emax = minetest.get_mapgen_object("voxelmanip")
 	vm:get_data(data)

mod.conf

@@ -1,3 +1,4 @@
 name = mapgen_rivers
 title = Map generator with realistic rivers
-optional_depends = biomegen, default
+depends = default
+optional_depends = biomegen

polygons.lua

@@ -236,15 +236,15 @@ local function make_polygons(minp, maxp)
 				end
 			end
 
-			polygon.river_corners = {riverA, riverB, riverC, riverD}
+			polygon.river_corners = {riverA, 1-riverB, 2-riverC, 1-riverD}
 
 			-- Flow directions
 			local dirA, dirB, dirC, dirD = dirs[iA], dirs[iB], dirs[iC], dirs[iD]
 			-- Determine the river flux on the edges, by testing dirs values
 			local river_west = (dirA==1 and riverA or 0) + (dirD==3 and riverD or 0)
 			local river_north = (dirA==2 and riverA or 0) + (dirB==4 and riverB or 0)
-			local river_east = (dirB==1 and riverB or 0) + (dirC==3 and riverC or 0)
+			local river_east = 1 - (dirB==1 and riverB or 0) - (dirC==3 and riverC or 0)
-			local river_south = (dirD==2 and riverD or 0) + (dirC==4 and riverC or 0)
+			local river_south = 1 - (dirD==2 and riverD or 0) - (dirC==4 and riverC or 0)
 
 			polygon.rivers = {river_west, river_north, river_east, river_south}
 		end

pregenerate.lua

@@ -13,6 +13,38 @@ local time_step = mapgen_rivers.settings.evol_time_step
 local niter = math.ceil(time/time_step)
 time_step = time / niter
 
+local use_margin = mapgen_rivers.settings.margin
+local margin_width = mapgen_rivers.settings.margin_width / blocksize
+local margin_elev = mapgen_rivers.settings.margin_elev
+
+local function margin(dem, width, elev)
+	local X, Y = dem.X, dem.Y
+	for i=1, width do
+		local c1 = ((i-1)/width) ^ 0.5
+		local c2 = (1-c1) * elev
+		local index = (i-1)*X + 1
+		for x=1, X do
+			dem[index] = dem[index] * c1 + c2
+			index = index + 1
+		end
+		index = i
+		for y=1, Y do
+			dem[index] = dem[index] * c1 + c2
+			index = index + X
+		end
+		index = X*(Y-i) + 1
+		for x=1, X do
+			dem[index] = dem[index] * c1 + c2
+			index = index + 1
+		end
+		index = X-i + 1
+		for y=1, Y do
+			dem[index] = dem[index] * c1 + c2
+			index = index + X
+		end
+	end
+end
+
 local function pregenerate(keep_loaded)
 	local grid = mapgen_rivers.grid
 	local size = grid.size
@@ -26,6 +58,10 @@ local function pregenerate(keep_loaded)
 	dem.X = size.x
 	dem.Y = size.y
 
+	if use_margin then
+		margin(dem, margin_width, margin_elev)
+	end
+
 	local model = EvolutionModel(evol_params)
 	model.dem = dem
 	local ref_dem = model:define_isostasy(dem)
@@ -41,6 +77,9 @@ local function pregenerate(keep_loaded)
 		if i < niter then
 			if tectonic_step ~= 0 then
 				nobj_base:get_3d_map_flat({x=0, y=tectonic_step*i, z=0}, ref_dem)
+				if use_margin then
+					margin(ref_dem, margin_width, margin_elev)
+				end
 			end
 			model:isostasy()
 		end

settings.lua

@@ -1,7 +1,7 @@
 local mtsettings = minetest.settings
 local mgrsettings = Settings(minetest.get_worldpath() .. '/mapgen_rivers.conf')
 
-mapgen_rivers.version = "1.0.2"
+mapgen_rivers.version = "1.0.1"
 
 local previous_version_mt = mtsettings:get("mapgen_rivers_version") or "0.0"
 local previous_version_mgr = mgrsettings:get("version") or "0.0"
@@ -74,6 +74,9 @@ mapgen_rivers.settings = {
 
 	grid_x_size = def_setting('grid_x_size', 'number', 1000),
 	grid_z_size = def_setting('grid_z_size', 'number', 1000),
+	margin = def_setting('margin', 'bool', true),
+	margin_width = def_setting('margin_width', 'number', 2000),
+	margin_elev = def_setting('margin_elev', 'number', -200),
 	evol_params = {
 		K = def_setting('river_erosion_coef', 'number', 0.5),
 		m = def_setting('river_erosion_power', 'number', 0.4),

settingtypes.txt

@@ -17,6 +17,16 @@ mapgen_rivers_grid_x_size (Grid X size) int 1000 50 5000
 #    Actual size of the map is grid_z_size * blocksize
 mapgen_rivers_grid_z_size (Grid Z size) int 1000 50 5000
 
+#    If margin is enabled, elevation becomes closer to a fixed value when approaching
+#    the edges of the map.
+mapgen_rivers_margin (Margin) bool true
+
+#    Width of the transition at map borders, in nodes
+mapgen_rivers_margin_width (Margin width) float 2000.0 0.0 15000.0
+
+#    Elevation toward which to converge at map borders
+mapgen_rivers_margin_elev (Margin elevation) float -200.0 -31000.0 31000.0
+
 #    Minimal catchment area for a river to be drawn, in square nodes
 #    Lower value means bigger river density
 mapgen_rivers_min_catchment (Minimal catchment area) float 3600.0 100.0 1000000.0

terrainlib_lua/erosion.lua

@@ -1,13 +1,7 @@
 -- erosion.lua
 
--- This is the main file of terrainlib_lua. It registers the EvolutionModel object and some of the 
-
 local function erode(model, time)
-	-- Apply river erosion on the model
+	--local tinsert = table.insert
-	-- Erosion model is based on the simplified version of the stream-power law Ey = K×A^m×S
-	-- where Ey is the vertical erosion speed, A catchment area of the river, S slope along the river, m and K local constants.
-	-- It is equivalent to considering a horizontal erosion wave travelling at Ex = K×A^m, and this latter approach allows much greather time steps so it is used here.
-	-- For each point, instead of moving upstream and see what point the erosion wave would reach, we move downstream and see from which point the erosion wave would reach the given point, then we can set the elevation.
 	local mmin, mmax = math.min, math.max
 	local dem = model.dem
 	local dirs = model.dirs
@@ -28,9 +22,9 @@ local function erode(model, time)
 
 	if scalars then
 		for i=1, X*Y do
-			local etime = 1 / (K*rivers[i]^m) -- Inverse of erosion speed (Ex); time needed for the erosion wave to move through the river section.
+			local etime = 1 / (K*rivers[i]^m)
 			erosion_time[i] = etime
-			lakes[i] = mmax(lakes[i], dem[i], sea_level) -- Use lake/sea surface if higher than ground level, because rivers can not erode below.
+			lakes[i] = mmax(lakes[i], dem[i], sea_level)
 		end
 	else
 		for i=1, X*Y do
@@ -45,12 +39,10 @@ local function erode(model, time)
 		local remaining = time
 		local new_elev
 		while true do
-			-- Explore downstream until we find the point 'iw' from which the erosion wave will reach 'i'
 			local inext = iw
 			local d = dirs[iw]
 
-			-- Follow the river downstream (move 'iw')
+			if d == 0 then
-			if d == 0 then -- If no flow direction, we reach the border of the map: set elevation to the latest node's elev and abort.
 				new_elev = lakes[iw]
 				break
 			elseif d == 1 then
@@ -64,13 +56,13 @@ local function erode(model, time)
 			end
 
 			local etime = erosion_time[iw]
-			if remaining <= etime then -- We have found the node from which the erosion wave will take 'time' to arrive to 'i'.
+			if remaining <= etime then
 				local c = remaining / etime
-				new_elev = (1-c) * lakes[iw] + c * lakes[inext] -- Interpolate linearly between the two nodes
+				new_elev = (1-c) * lakes[iw] + c * lakes[inext]
 				break
 			end
 
-			remaining = remaining - etime -- If we still don't reach the target time, decrement time and move to next point.
+			remaining = remaining - etime
 			iw = inext
 		end
 
@@ -79,55 +71,50 @@ local function erode(model, time)
 end
 
 local function diffuse(model, time)
-	-- Apply diffusion using finite differences methods
+    local mmax = math.max
-	-- Adapted for small radiuses
+    local dem = model.dem
-	local mmax = math.max
+    local X, Y = dem.X, dem.Y
-	local dem = model.dem
+    local d = model.params.d
-	local X, Y = dem.X, dem.Y
+    local dmax = d
-	local d = model.params.d
+    if type(d) == "table" then
-	-- 'd' is equal to 4 times the diffusion coefficient
+        dmax = -math.huge
-	local dmax = d
+        for i=1, X*Y do
-	if type(d) == "table" then
+            dmax = mmax(dmax, d[i])
-		dmax = -math.huge
+        end
-		for i=1, X*Y do
+    end
-			dmax = mmax(dmax, d[i])
-		end
-	end
 
-	local diff = dmax * time
+    local diff = dmax * time
-	-- diff should never exceed 1 per iteration.
+    local niter = math.floor(diff) + 1
-	-- If needed, we will divide the process in enough iterations so that 'ddiff' is below 1.
+    local ddiff = diff / niter
-	local niter = math.floor(diff) + 1
-	local ddiff = diff / niter
 
-	local temp = {}
+    local temp = {}
-	for n=1, niter do
+    for n=1, niter do
-		local i = 1
+        local i = 1
-		for y=1, Y do
+        for y=1, Y do
-			local iN = (y==1) and 0 or -X
+            local iN = (y==1) and 0 or -X
-			local iS = (y==Y) and 0 or X
+            local iS = (y==Y) and 0 or X
-			for x=1, X do
+            for x=1, X do
-				local iW = (x==1) and 0 or -1
+                local iW = (x==1) and 0 or -1
-				local iE = (x==X) and 0 or 1
+                local iE = (x==X) and 0 or 1
-				-- Laplacian Δdem × 1/4
+                temp[i] = (dem[i+iN]+dem[i+iE]+dem[i+iS]+dem[i+iW])*0.25 - dem[i]
-				temp[i] = (dem[i+iN]+dem[i+iE]+dem[i+iS]+dem[i+iW])*0.25 - dem[i]
+                i = i + 1
-				i = i + 1
+            end
-			end
+        end
-		end
 
-		for i=1, X*Y do
+        for i=1, X*Y do
-			dem[i] = dem[i] + temp[i]*ddiff
+            dem[i] = dem[i] + temp[i]*ddiff
-		end
+        end
-	end
+    end
+    -- TODO Test this
 end
 
 local modpath = ""
 if minetest then
-	if minetest.global_exists('mapgen_rivers') then
+    if minetest.global_exists('mapgen_rivers') then
-		modpath = mapgen_rivers.modpath .. "terrainlib_lua/"
+        modpath = mapgen_rivers.modpath .. "terrainlib_lua/"
-	else
+    else
-		modpath = minetest.get_modpath(minetest.get_current_modname()) .. "terrainlib_lua/"
+        modpath = minetest.get_modpath(minetest.get_current_modname()) .. "terrainlib_lua/"
-	end
+    end
 end
 
 local rivermapper = dofile(modpath .. "rivermapper.lua")
@@ -139,7 +126,6 @@ local function flow(model)
 end
 
 local function uplift(model, time)
-	-- Raises the terrain according to uplift rate (model.params.uplift)
 	local dem = model.dem
 	local X, Y = dem.X, dem.Y
 	local uplift_rate = model.params.uplift
@@ -156,7 +142,6 @@ local function uplift(model, time)
 end
 
 local function noise(model, time)
-	-- Adds noise to the terrain according to noise depth (model.params.noise)
 	local random = math.random
 	local dem = model.dem
 	local noise_depth = model.params.noise * 2 * time
@@ -166,43 +151,35 @@ local function noise(model, time)
 	end
 end
 
--- Isostasy
--- This is the geological phenomenon that makes the lithosphere "float" over the underlying layers.
--- One of the key implications is that when a very large mass is removed from the ground, the lithosphere reacts by moving upward. This compensation only occurs at large scale (as the lithosphere is not flexible enough for small scale adjustments) so the implementation is using a very large-window Gaussian blur of the elevation array.
-
--- This implementation is quite simplistic, it does not do a mass balance of the lithosphere as this would introduce too many parameters. Instead, it defines a reference equilibrium elevation, and the ground will react toward this elevation (at the scale of the gaussian window).
--- A change in reference isostasy during the run can also be used to simulate tectonic forcing, like making a new mountain range appear.
 local function define_isostasy(model, ref, link)
-	ref = ref or model.dem
+    ref = ref or model.dem
-	if link then
+    if link then
-		model.isostasy_ref = ref
+        model.isostasy_ref = ref
-		return
+        return
-	end
+    end
 
-	local X, Y = ref.X, ref.Y
+    local X, Y = ref.X, ref.Y
-	local ref2 = model.isostasy_ref or {X=X, Y=Y}
+    local ref2 = model.isostasy_ref or {X=X, Y=Y}
-	model.isostasy_ref = ref2
+    model.isostasy_ref = ref2
-	for i=1, X*Y do
+    for i=1, X*Y do
-		ref2[i] = ref[i]
+        ref2[i] = ref[i]
-	end
+    end
 
-	return ref2
+    return ref2
 end
 
--- Apply isostasy
 local function isostasy(model)
 	local dem = model.dem
 	local X, Y = dem.X, dem.Y
 	local temp = {X=X, Y=Y}
 	local ref = model.isostasy_ref
 	for i=1, X*Y do
-		temp[i] = ref[i] - dem[i] -- Compute the difference between the ground level and the target level
+		temp[i] = ref[i] - dem[i]
 	end
 
-	-- Blur the difference map using Gaussian blur
 	gaussian.gaussian_blur_approx(temp, model.params.compensation_radius, 4)
 	for i=1, X*Y do
-		dem[i] = dem[i] + temp[i] -- Apply the difference
+		dem[i] = dem[i] + temp[i]
 	end
 end
 

terrainlib_lua/gaussian.lua

@@ -71,6 +71,20 @@ local function box_blur_2d(map1, size, map2)
 	return map1
 end
 
+--[[local function gaussian_blur(map, std, tail)
+	local exp = math.exp
+
+	local kernel_mid = math.ceil(std*tail) + 1
+	local kernel_size = kernel_mid * 2 - 1
+	local kernel = {}
+	local cst1 = 1/(std*(2*math.pi)^0.5)
+	local cst2 = -1/(2*std^2)
+	for i=1, kernel_size do
+		kernel[i] = cst1 * exp((i-kernel_mid)^2 * cst2)
+	end
+
+	]]
+
 local function gaussian_blur_approx(map, sigma, n, map2)
 	map2 = map2 or {}
 	local sizes = get_box_size(sigma, n)

terrainlib_lua/rivermapper.lua

@@ -9,26 +9,24 @@
 --
 -- Big thanks to them for releasing this paper under a free license ! :)
 
--- The algorithm here makes use of most of the paper's concepts, including the Planar Borůvka algorithm.
+-- The algorithm here makes use of most of the paper's concepts, including the Planar Boruvka algorithm.
 -- Only flow_local and accumulate_flow are custom algorithms.
 
-
 local function flow_local_semirandom(plist)
-	-- Determines how water should flow at 1 node scale.
-	-- The straightforward approach would be "Water will flow to the lowest of the 4 neighbours", but here water flows to one of the lower neighbours, chosen randomly, but probability depends on height difference.
-	-- This makes rivers better follow the curvature of the topography at large scale, and be less biased by pure N/E/S/W directions.
-	-- 'plist': array of downward height differences (0 if upward)
 	local sum = 0
 	for i=1, #plist do
-		sum = sum + plist[i] -- Sum of probabilities
+		sum = sum + plist[i]
 	end
-
+	--for _, p in ipairs(plist) do
+		--sum = sum + p
+	--end
 	if sum == 0 then
 		return 0
 	end
 	local r = math.random() * sum
 	for i=1, #plist do
 		local p = plist[i]
+	--for i, p in ipairs(plist) do
 		if r < p then
 			return i
 		end
@@ -37,14 +35,11 @@ local function flow_local_semirandom(plist)
 	return 0
 end
 
--- Maybe implement more flow methods in the future?
 local flow_methods = {
 	semirandom = flow_local_semirandom,
 }
 
--- Applies all steps of the flow routing, to calculate flow direction for every node, and lake surface elevation.
+local function flow_routing(dem, dirs, lakes, method)
--- It's quite a hard piece of code, but we will go step by step and explain what's going on, so stay with me and... let's goooooooo!
-local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are optional tables to reuse for memory optimization, they may contain any data.
 	method = method or 'semirandom'
 	local flow_local = flow_methods[method] or flow_local_semirandom
 
@@ -52,6 +47,7 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 	lakes = lakes or {}
 
 	-- Localize for performance
+	--local tinsert = table.insert
 	local tremove = table.remove
 	local mmax = math.max
 
@@ -66,15 +62,11 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 		dirs2[i] = 0
 	end
 
-	----------------------------------------
-	-- STEP 1: Find local flow directions --
-	----------------------------------------
-	-- Use the local flow function and fill the flow direction tables
 	local singular = {}
 	for y=1, Y do
 		for x=1, X do
 			local zi = dem[i]
-			local plist = { -- Get the height difference of the 4 neighbours (and 0 if uphill)
+			local plist = {
 				y<Y and mmax(zi-dem[i+X], 0) or 0, -- Southward
 				x<X and mmax(zi-dem[i+1], 0) or 0, -- Eastward
 				y>1 and mmax(zi-dem[i-X], 0) or 0, -- Northward
@@ -82,10 +74,8 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 			}
 
 			local d = flow_local(plist)
-			-- 'dirs': Direction toward which water flow
-			-- 'dirs2': Directions from which water comes
 			dirs[i] = d
-			if d == 0 then -- If water can't flow from this node, add it to the list of singular nodes that will be resolved later
+			if d == 0 then
 				singular[#singular+1] = i
 			elseif d == 1 then
 				dirs2[i+X] = dirs2[i+X] + 1
@@ -100,39 +90,30 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 		end
 	end
 
-	--------------------------------------
+	-- Compute basins and links
-	-- STEP 2: Compute basins and links --
-	--------------------------------------
-	-- Now water can flow until it reaches a singular node (which is in most cases the bottom of a depression)
-	-- We will calculate the drainage basin of every singular node (all the nodes from which the water will flow in this singular node, directly or indirectly), make an adjacency list of basins, and find the lowest pass between each pair of adjacent basins (they are potential lake outlets)
 	local nbasins = #singular
 	local basin_id = {}
 	local links = {}
 	local basin_links
 
-	-- Function to analyse a link between two nodes
 	local function add_link(i1, i2, b1, isY)
-		-- i1, i2: coordinates of two nodes
-		-- b1: basin that contains i1
-		-- isY: whether the link is in Y direction
 		local b2
-		-- Note that basin number #0 represents the outside of the map; or if the coordinate is inside the map, means that the basin number is uninitialized.
+		if i2 == 0 then
-		if i2 == 0 then -- If outside the map
 			b2 = 0
 		else
 			b2 = basin_id[i2]
-			if b2 == 0 then -- If basin of i2 is not already computed, skip
+			if b2 == 0 then
 				return
 			end
 		end
-		if b2 ~= b1 then -- If these two nodes don't belong to the same basin, we have found a link between two adjacent basins
+		if b2 ~= b1 then
-			local elev = i2 == 0 and dem[i1] or mmax(dem[i1], dem[i2]) -- Elevation of the highest of the two sides of the link (or only i1 if b2 is map outside)
+			local elev = i2 == 0 and dem[i1] or mmax(dem[i1], dem[i2])
 			local l2 = basin_links[b2]
 			if not l2 then
 				l2 = {}
 				basin_links[b2] = l2
 			end
-			if not l2.elev or l2.elev > elev then -- If this link is lower than the lowest registered link between these two basins, register it as the new lowest pass
+			if not l2.elev or l2.elev > elev then
 				l2.elev = elev
 				l2.i = mmax(i1,i2)
 				l2.is_y = isY
@@ -145,48 +126,51 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 	for i=1, X*Y do
 		basin_id[i] = 0
 	end
-
+	--for ib, s in ipairs(singular) do
 	for ib=1, nbasins do
-		-- Here we will recursively search upstream from the singular node to determine its drainage basin
+		--local s = singular[ib]
-		local queue = {singular[ib]} -- Start with the singular node, then this queue will be filled with water donors neighbours
+		local queue = {singular[ib]}
 		basin_links = {}
 		links[#links+1] = basin_links
+		--tinsert(links, basin_links)
 		while #queue > 0 do
 			local i = tremove(queue)
 			basin_id[i] = ib
-			local d = dirs2[i] -- Get the directions water is coming from
+			local d = dirs2[i]
 
-			-- Iterate through the 4 directions
+			if d >= 8 then -- River coming from East
-			if d >= 8 then -- River coming from the East
 				d = d - 8
 				queue[#queue+1] = i+1
-			-- If no river is coming from the East, we might be at the limit of two basins, thus we need to test adjacency.
+				--tinsert(queue, i+X)
 			elseif i%X > 0 then
 				add_link(i, i+1, ib, false)
-			else -- If the eastern neighbour is outside the map
+			else
 				add_link(i, 0, ib, false)
 			end
 
-			if d >= 4 then -- River coming from the South
+			if d >= 4 then -- River coming from South
 				d = d - 4
 				queue[#queue+1] = i+X
+				--tinsert(queue, i+1)
 			elseif i <= X*(Y-1) then
 				add_link(i, i+X, ib, true)
 			else
 				add_link(i, 0, ib, true)
 			end
 
-			if d >= 2 then -- River coming from the West
+			if d >= 2 then -- River coming from West
 				d = d - 2
 				queue[#queue+1] = i-1
+				--tinsert(queue, i-X)
 			elseif i%X ~= 1 then
 				add_link(i, i-1, ib, false)
 			else
 				add_link(i, 0, ib, false)
 			end
 
-			if d >= 1 then -- River coming from the North
+			if d >= 1 then -- River coming from North
 				queue[#queue+1] = i-X
+				--tinsert(queue, i-1)
 			elseif i > X then
 				add_link(i, i-X, ib, true)
 			else
@@ -202,7 +186,7 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 		nlinks[i] = 0
 	end
 
-	-- Iterate through pairs of adjacent basins, and make the links reciprocal
+	--for ib1, blinks in ipairs(links) do
 	for ib1=1, #links do
 		for ib2, link in pairs(links[ib1]) do
 			if ib2 < ib1 then
@@ -213,15 +197,6 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 		end
 	end
 
-	-----------------------------------------------------
-	-- STEP 3: Compute minimal spanning tree of basins --
-	-----------------------------------------------------
-	-- We've got an adjacency list of basins with the elevation of their links.
-	-- We will build a minimal spanning tree of the basins (where costs are the elevation of the links). As demonstrated by Cordonnier et al., this finds the outlets of the basins, where water would naturally flow. This does not tell in which direction water is flowing, however.
-	-- We will use a version of Borůvka's algorithm, with Mareš' optimizations to approach linear complexity (see paper).
-	-- The concept of Borůvka's algorithm is to take elements and merge them with their lowest neighbour, until all elements are merged.
-	-- Mareš' optimizations mainly consist in skipping elements that have over 8 links, until extra links are removed when other elements are merged.
-	-- Note that for this step we are only working on basins, not grid nodes.
 	local lowlevel = {}
 	for i, n in pairs(nlinks) do
 		if n <= 8 then
@@ -231,8 +206,6 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 
 	local basin_graph = {}
 	for n=1, nbasins do
-		-- Iterate in lowlevel but its contents may change during the loop
-		-- 'next' called with only one argument always returns an element if table is not empty
 		local b1, lnk1 = next(lowlevel)
 		lowlevel[b1] = nil
 
@@ -240,7 +213,6 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 		local lowest = math.huge
 		local lnk1 = links[b1]
 		local i = 0
-		-- Look for lowest link
 		for bn, bdata in pairs(lnk1) do
 			i = i + 1
 			if bdata.elev < lowest then
@@ -249,7 +221,7 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 			end
 		end
 
-		-- Add link to the graph, in both directions
+		-- Add link to the graph
 		local bound = lnk1[b2]
 		local bb1, bb2 = bound[1], bound[2]
 		if not basin_graph[bb1] then
@@ -267,7 +239,6 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 		lnk1[b2] = nil
 		lnk2[b1] = nil
 		nlinks[b2] = nlinks[b2] - 1
-		-- When the number of links is changing, we need to check whether the basin can be added to / removed from 'lowlevel'
 		if nlinks[b2] == 8 then
 			lowlevel[b2] = lnk2
 		end
@@ -276,32 +247,25 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 			local lnkn = links[bn]
 			lnkn[b1] = nil
 
-			if lnkn[b2] then -- If bassin bn is also linked to b2
+			if lnkn[b2] then
-				nlinks[bn] = nlinks[bn] - 1 -- Then bassin bn is losing a link because it keeps only one link toward b1/b2 after the merge
+				nlinks[bn] = nlinks[bn] - 1
 				if nlinks[bn] == 8 then
 					lowlevel[bn] = lnkn
 				end
-			else -- If bn was linked to b1 but not to b2
+			else
-				nlinks[b2] = nlinks[b2] + 1 -- Then b2 is gaining a link to bn because of the merge
+				nlinks[b2] = nlinks[b2] + 1
 				if nlinks[b2] == 9 then
 					lowlevel[b2] = nil
 				end
 			end
 
-			if not lnkn[b2] or lnkn[b2].elev > bdata.elev then -- If the link b1-bn will become the new lowest link between b2 and bn, redirect the link to b2
+			if not lnkn[b2] or lnkn[b2].elev > bdata.elev then
 				lnkn[b2] = bdata
 				lnk2[bn] = bdata
 			end
 		end
 	end
 
-	--------------------------------------------------------------
-	-- STEP 4: Orient basin graph, and grid nodes inside basins --
-	--------------------------------------------------------------
-	-- We will finally solve those freaking singular nodes.
-	-- To orient the basin graph, we will consider that the ultimate basin water should flow into is the map outside (basin #0). We will start from it and recursively walk upstream to the neighbouring basins, using only links that are in the minimal spanning tree. This gives the flow direction of the links, and thus, the outlet of every basin.
-	-- This will also give lake elevation, which is the highest link encountered between map outside and the given basin on the spanning tree.
-	-- And within each basin, we need to modify flow directions to connect the singular node to the outlet.
 	local queue = {[0] = -math.huge}
 	local basin_lake = {}
 	for n=1, nbasins do
@@ -309,17 +273,15 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 	end
 	local reverse = {3, 4, 1, 2, [0]=0}
 	for n=1, nbasins do
-		local b1, elev1 = next(queue) -- Pop from queue
+		local b1, elev1 = next(queue)
 		queue[b1] = nil
 		basin_lake[b1] = elev1
-		-- Iterate through b1's neighbours (according to the spanning tree)
 		for b2, bound in pairs(basin_graph[b1]) do
 			-- Make b2 flow into b1
-			local i = bound.i -- Get the coordinate of the link (which is the basin's outlet)
+			local i = bound.i
-			local dir = bound.is_y and 3 or 4 -- And get the direction (S/E/N/W)
+			local dir = bound.is_y and 3 or 4
 			if basin_id[i] ~= b2 then
 				dir = dir - 2
-				-- Coordinate 'i' refers to the side of the link with the highest X/Y position. In case it is in the wrong basin, take the other side by decrementing by one row/column.
 				if bound.is_y then
 					i = i - X
 				else
@@ -329,12 +291,8 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 				dir = 0
 			end
 
-			-- Use the flow directions computed in STEP 2 to find the route from the outlet position to the singular node, and reverse this route to make the singular node flow into the outlet
-			-- This can make the river flow uphill, which may seem unnatural, but it can only happen below a lake (because outlet elevation defines lake surface elevation)
 			repeat
-				-- Assign i's direction to 'dir', and get i's former direction
 				dir, dirs[i] = dirs[i], dir
-				-- Move i by following its former flow direction (downstream)
 				if dir == 1 then
 					i = i + X
 				elseif dir == 2 then
@@ -344,36 +302,26 @@ local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are
 				elseif dir == 4 then
 					i = i - 1
 				end
-				-- Reverse the flow direction for the next node, which will flow into i
 				dir = reverse[dir]
-			until dir == 0 -- Stop when reaching the singular node
+			until dir == 0
-
+			-- Add b2 into the queue
-			-- Add basin b2 into the queue, and keep the highest link elevation, that will define the elevation of the lake in b2
 			queue[b2] = mmax(elev1, bound.elev)
-			-- Remove b1 from b2's neighbours to avoid coming back to b1
 			basin_graph[b2][b1] = nil
 		end
 		basin_graph[b1] = nil
 	end
 
-	-- Every node will be assigned the lake elevation of the basin it belongs to.
-	-- If lake elevation is lower than ground elevation, it simply means that there is no lake here.
 	for i=1, X*Y do
 		lakes[i] = basin_lake[basin_id[i]]
 	end
 
-	-- That's it!
 	return dirs, lakes
 end
 
-
 local function accumulate(dirs, waterq)
-	-- Calculates the river flow by determining the surface of the catchment area for every node
-	-- This means: how many nodes will give their water to that given node, directly or indirectly?
-	-- This is obtained by following rivers downstream and summing up the flow of every tributary, starting with a value of 1 at the sources.
-	-- This will give non-zero values for every node but only large values will be considered to be rivers.
 	waterq = waterq or {}
 	local X, Y = dirs.X, dirs.Y
+	--local tinsert = table.insert
 
 	local ndonors = {}
 	local waterq = {X=X, Y=Y}
@@ -382,7 +330,7 @@ local function accumulate(dirs, waterq)
 		waterq[i] = 1
 	end
 
-	-- Calculate the number of direct donors
+	--for i1, dir in ipairs(dirs) do
 	for i1=1, X*Y do
 		local i2
 		local dir = dirs[i1]
@@ -401,12 +349,10 @@ local function accumulate(dirs, waterq)
 	end
 
 	for i1=1, X*Y do
-		-- Find sources (nodes that have no donor)
 		if ndonors[i1] == 0 then
 			local i2 = i1
 			local dir = dirs[i2]
 			local w = waterq[i2]
-			-- Follow the water flow downstream: move 'i2' to the next node according to its flow direction
 			while dir > 0 do
 				if dir == 1 then
 					i2 = i2 + X
@@ -417,12 +363,9 @@ local function accumulate(dirs, waterq)
 				elseif dir == 4 then
 					i2 = i2 - 1
 				end
-				-- Increment the water quantity of i2
 				w = w + waterq[i2]
 				waterq[i2] = w
 
-				-- Stop on an unresolved confluence (node with >1 donors) and decrease the number of remaining donors
-				-- When the ndonors of a confluence has decreased to 1, it means that its water quantity has already been incremented by its tributaries, so it can be resolved like a standard river section. However, do not decrease ndonors to zero to avoid considering it as a source.
 				if ndonors[i2] > 1 then
 					ndonors[i2] = ndonors[i2] - 1
 					break

terrainlib_lua/twist.lua

@@ -1,4 +1,4 @@
--- twist.lua
+-- bounds.lua
 
 local function get_bounds(dirs, rivers)
 	local X, Y = dirs.X, dirs.Y