Express map size in Minetest nodes, not in river grid nodes

This introduces new parameters 'map_x_size' and 'map_z_size' that default to 15K
Deprecates 'grid_x_size' and 'grid_z_size'; if they are present, corresponding
values of 'map_x_size' and 'map_z_size' are automatically written in config files.
Also rework compatibility system to better compare versions,
and bump version to 1.0.2-dev1.

CHANGELOG.md

@@ -0,0 +1,18 @@
+CHANGELOG
+=========
+
+## `v1.0.2` (2022-01-10)
+- Use builtin logging system and appropriate loglevels
+- Skip empty chunks, when generating high above ground (~20% speedup)
+- Minor optimizations (turning global variables to local...)
+
+## `v1.0.1` (2021-09-14)
+- Automatically switch to `singlenode` mapgen at init time
+
+## `v1.0` (2021-08-01)
+- Rewritten pregen code (terrainlib) in pure Lua
+- Optimized grid loading
+- Load grid nodes on request by default
+- Changed river width settings
+- Added map size in settings
+- Added logs

README.md

@@ -1,5 +1,5 @@
 # Map Generator with Rivers
-`mapgen_rivers v1.0.1` by Gaël de Sailly.
+`mapgen_rivers v1.0.2` by Gaël de Sailly.
 
 Semi-procedural map generator for Minetest 5.x. It aims to create realistic and nice-looking landscapes for the game, focused on river networks. It is based on algorithms modelling water flow and river erosion at a broad scale, similar to some used by researchers in Earth Sciences. It is taking some inspiration from [Fastscape](https://github.com/fastscape-lem/fastscape).
 
@@ -13,10 +13,11 @@ It used to be composed of a Python script doing pre-generation, and a Lua mod re
 License: GNU LGPLv3.0
 
 Code: Gaël de Sailly
+
 Flow routing algorithm concept (in `terrainlib/rivermapper.lua`): Cordonnier, G., Bovy, B., & Braun, J. (2019). A versatile, linear complexity algorithm for flow routing in topographies with depressions. Earth Surface Dynamics, 7(2), 549-562.
 
 # Requirements
-Mod dependencies: `default` required, and [`biomegen`](https://github.com/Gael-de-Sailly/biomegen) optional (provides biome system).
+No required dependency, but [`biomegen`](https://gitlab.com/gaelysam/biomegen) recommended (provides biome system).
 
 # Installation
 This mod should be placed in the `mods/` directory of Minetest like any other mod.

compatibility.lua

@@ -1,3 +1,21 @@
+local function version_is_lower(v1, v2)
+	local d1, c1, d2, c2
+	while #v1 > 0 and #v2 > 0 do
+		d1, c1, v1 = v1:match("^(%d*)(%D*)(.*)$")
+		d2, c2, v2 = v2:match("^(%d*)(%D*)(.*)$")
+
+		d1 = tonumber(d1) or -1
+		d2 = tonumber(d2) or -1
+		if d1 ~= d2 then
+			return d1 < d2
+		end
+		if c1 ~= c2 then
+			return c1 < c2
+		end
+	end
+	return false
+end
+
 local function fix_min_catchment(settings, is_global)
 	local prefix = is_global and "mapgen_rivers_" or ""
 
@@ -21,6 +39,18 @@ local function fix_compatibility_minetest(settings)
 	if previous_version == "0.0" then
 		fix_min_catchment(settings, true)
 	end
+
+	if version_is_lower(previous_version, "1.0.2-dev1") then
+		local blocksize = tonumber(settings:get("mapgen_rivers_blocksize") or 15)
+		local grid_x_size = tonumber(settings:get("mapgen_rivers_grid_x_size"))
+		if grid_x_size then
+			settings:set("mapgen_rivers_map_x_size", tostring(grid_x_size * blocksize))
+		end
+		local grid_z_size = tonumber(settings:get("mapgen_rivers_grid_z_size"))
+		if grid_z_size then
+			settings:set("mapgen_rivers_map_z_size", tostring(grid_z_size * blocksize))
+		end
+	end
 end
 
 local function fix_compatibility_mapgen_rivers(settings)
@@ -29,6 +59,18 @@ local function fix_compatibility_mapgen_rivers(settings)
 	if previous_version == "0.0" then
 		fix_min_catchment(settings, false)
 	end
+
+	if version_is_lower(previous_version, "1.0.2-dev1") then
+		local blocksize = tonumber(settings:get("blocksize") or 15)
+		local grid_x_size = tonumber(settings:get("grid_x_size"))
+		if grid_x_size then
+			settings:set("map_x_size", tostring(grid_x_size * blocksize))
+		end
+		local grid_z_size = tonumber(settings:get("grid_z_size"))
+		if grid_z_size then
+			settings:set("map_z_size", tostring(grid_z_size * blocksize))
+		end
+	end
 end
 
 return fix_compatibility_minetest, fix_compatibility_mapgen_rivers

geometry.lua

@@ -1,3 +1,6 @@
+local sqrt, abs = math.sqrt, math.abs
+local unpk = unpack
+
 local function distance_to_segment(x1, y1, x2, y2, x, y)
 	-- get the distance between point (x,y) and segment (x1,y1)-(x2,y2)
 	local a = (x1-x2)^2 + (y1-y2)^2 -- square of distance
@@ -5,13 +8,13 @@ local function distance_to_segment(x1, y1, x2, y2, x, y)
 	local c = (x2-x)^2 + (y2-y)^2
 	if a + b < c then
 		-- The closest point of the segment is the extremity 1
-		return math.sqrt(b)
+		return sqrt(b)
 	elseif a + c < b then
 		-- The closest point of the segment is the extremity 2
-		return math.sqrt(c)
+		return sqrt(c)
 	else
 		-- The closest point is on the segment
-		return math.abs(x1 * (y2-y) + x2 * (y-y1) + x * (y1-y2)) / math.sqrt(a)
+		return abs(x1 * (y2-y) + x2 * (y-y1) + x * (y1-y2)) / sqrt(a)
 	end
 end
 
@@ -19,8 +22,8 @@ local function transform_quadri(X, Y, x, y)
 	-- To index points in an irregular quadrilateral, giving x and y between 0 (one edge) and 1 (opposite edge)
 	-- X, Y 4-vectors giving the coordinates of the 4 vertices
 	-- x, y position to index.
-	local x1, x2, x3, x4 = unpack(X)
+	local x1, x2, x3, x4 = unpk(X)
-	local y1, y2, y3, y4 = unpack(Y)
+	local y1, y2, y3, y4 = unpk(Y)
 
 	-- Compare distance to 2 opposite edges, they give the X coordinate
 	local d23 = distance_to_segment(x2,y2,x3,y3,x,y)

heightmap.lua

@@ -8,6 +8,10 @@ local riverbed_slope = mapgen_rivers.settings.riverbed_slope * mapgen_rivers.set
 
 local MAP_BOTTOM = -31000
 
+-- Localize for performance
+local floor, min, max = math.floor, math.min, math.max
+local unpk = unpack
+
 -- Linear interpolation
 local function interp(v00, v01, v11, v10, xf, zf)
 	local v0 = v01*xf + v00*(1-xf)
@@ -30,11 +34,11 @@ local function heightmaps(minp, maxp)
 
 			if poly then
 				local xf, zf = transform_quadri(poly.x, poly.z, x, z)
-				local i00, i01, i11, i10 = unpack(poly.i)
+				local i00, i01, i11, i10 = unpk(poly.i)
 
 				-- Load river width on 4 edges and corners
-				local r_west, r_north, r_east, r_south = unpack(poly.rivers)
+				local r_west, r_north, r_east, r_south = unpk(poly.rivers)
-				local c_NW, c_NE, c_SE, c_SW = unpack(poly.river_corners)
+				local c_NW, c_NE, c_SE, c_SW = unpk(poly.river_corners)
 
 				-- Calculate the depth factor for each edge and corner.
 				-- Depth factor:
@@ -64,10 +68,10 @@ local function heightmaps(minp, maxp)
 
 				-- Transform the coordinates to have xf and zf = 0 or 1 in rivers (to avoid rivers having lateral slope and to accomodate the surrounding smoothly)
 				if imax == 0 then
-					local x0 = math.max(r_west, c_NW-zf, zf-c_SW)
+					local x0 = max(r_west, c_NW-zf, zf-c_SW)
-					local x1 = math.min(r_east, c_NE+zf, c_SE-zf)
+					local x1 = min(r_east, c_NE+zf, c_SE-zf)
-					local z0 = math.max(r_north, c_NW-xf, xf-c_NE)
+					local z0 = max(r_north, c_NW-xf, xf-c_NE)
-					local z1 = math.min(r_south, c_SW+xf, c_SE-xf)
+					local z1 = min(r_south, c_SW+xf, c_SE-xf)
 					xf = (xf-x0) / (x1-x0)
 					zf = (zf-z0) / (z1-z0)
 				elseif imax == 1 then
@@ -90,7 +94,7 @@ local function heightmaps(minp, maxp)
 
 				-- Determine elevation by interpolation
 				local vdem = poly.dem
-				local terrain_height = math.floor(0.5+interp(
+				local terrain_height = floor(0.5+interp(
 					vdem[1],
 					vdem[2],
 					vdem[3],
@@ -115,10 +119,10 @@ local function heightmaps(minp, maxp)
 						lake_id = 1
 					end
 				end
-				local lake_height = math.max(math.floor(poly.lake[lake_id]), terrain_height)
+				local lake_height = max(floor(poly.lake[lake_id]), terrain_height)
 
 				if imax > 0 and depth_factor_max > 0 then
-					terrain_height = math.min(math.max(lake_height, sea_level) - math.floor(1+depth_factor_max*riverbed_slope), terrain_height)
+					terrain_height = min(max(lake_height, sea_level) - floor(1+depth_factor_max*riverbed_slope), terrain_height)
 				end
 
 				terrain_height_map[i] = terrain_height

init.lua

@@ -6,7 +6,7 @@ mapgen_rivers.world_data_path = minetest.get_worldpath() .. '/river_data/'
 
 if minetest.get_mapgen_setting("mg_name") ~= "singlenode" then
 	minetest.set_mapgen_setting("mg_name", "singlenode", true)
-	print("[mapgen_rivers] Mapgen set to singlenode")
+	minetest.log("warning", "[mapgen_rivers] Mapgen set to singlenode")
 end
 
 dofile(modpath .. 'settings.lua')
@@ -16,12 +16,11 @@ local elevation_chill = mapgen_rivers.settings.elevation_chill
 local use_distort = mapgen_rivers.settings.distort
 local use_biomes = mapgen_rivers.settings.biomes
 local use_biomegen_mod = use_biomes and minetest.global_exists('biomegen')
-use_biomes = use_biomes and not use_biomegen_mod
+use_biomes = use_biomes and minetest.global_exists('default') and not use_biomegen_mod
 
 if use_biomegen_mod then
 	biomegen.set_elevation_chill(elevation_chill)
 end
-dofile(modpath .. 'noises.lua')
 
 local heightmaps = dofile(modpath .. 'heightmap.lua')
 
@@ -32,6 +31,9 @@ local function interp(v00, v01, v11, v10, xf, zf)
 	return v1*zf + v0*(1-zf)
 end
 
+-- Localize for performance
+local floor, min = math.floor, math.min
+
 local data = {}
 
 local noise_x_obj, noise_z_obj, noise_distort_obj, noise_heat_obj, noise_heat_blend_obj
@@ -48,7 +50,7 @@ local sumtime2 = 0
 local ngen = 0
 
 local function generate(minp, maxp, seed)
-	print(("[mapgen_rivers] Generating from %s to %s"):format(minetest.pos_to_string(minp), minetest.pos_to_string(maxp)))
+	minetest.log("info", ("[mapgen_rivers] Generating from %s to %s"):format(minetest.pos_to_string(minp), minetest.pos_to_string(maxp)))
 
 	local chulens = {
 		x = maxp.x-minp.x+1,
@@ -111,8 +113,8 @@ local function generate(minp, maxp, seed)
 			end
 		end
 
-		local pminp = {x=math.floor(xmin), z=math.floor(zmin)}
+		local pminp = {x=floor(xmin), z=floor(zmin)}
-		local pmaxp = {x=math.floor(xmax)+1, z=math.floor(zmax)+1}
+		local pmaxp = {x=floor(xmax)+1, z=floor(zmax)+1}
 		incr = pmaxp.x-pminp.x+1
 		i_origin = 1 - pminp.z*incr - pminp.x
 		terrain_map, lake_map = heightmaps(pminp, pmaxp)
@@ -120,15 +122,43 @@ local function generate(minp, maxp, seed)
 		terrain_map, lake_map = heightmaps(minp, maxp)
 	end
 
-	local c_stone = minetest.get_content_id("default:stone")
+	-- Check that there is at least one position that reaches min y
-	local c_dirt = minetest.get_content_id("default:dirt")
+	if minp.y > sea_level then
-	local c_lawn = minetest.get_content_id("default:dirt_with_grass")
+		local y0 = minp.y
-	local c_dirtsnow = minetest.get_content_id("default:dirt_with_snow")
+		local is_empty = true
-	local c_snow = minetest.get_content_id("default:snowblock")
+		for i=1, #terrain_map do
-	local c_sand = minetest.get_content_id("default:sand")
+			if terrain_map[i] >= y0 or lake_map[i] >= y0 then
-	local c_water = minetest.get_content_id("default:water_source")
+				is_empty = false
-	local c_rwater = minetest.get_content_id("default:river_water_source")
+				break
-	local c_ice = minetest.get_content_id("default:ice")
+			end
+		end
+
+		-- If not, skip chunk
+		if is_empty then
+			local t = os.clock() - t0
+			ngen = ngen + 1
+			sumtime = sumtime + t
+			sumtime2 = sumtime2 + t*t
+
+			minetest.log("verbose", "[mapgen_rivers] Skipping empty chunk (fully above ground level)")
+			minetest.log("verbose", ("[mapgen_rivers] Done in %5.3f s"):format(t))
+			return
+		end
+	end
+
+	local c_stone = minetest.get_content_id("mapgen_stone")
+	local c_water = minetest.get_content_id("mapgen_water_source")
+	local c_rwater = minetest.get_content_id("mapgen_river_water_source")
+
+	local c_dirt, c_lawn, c_dirtsnow, c_snow, c_sand, c_ice
+	if use_biomes then
+		c_dirt = minetest.get_content_id("default:dirt")
+		c_lawn = minetest.get_content_id("default:dirt_with_grass")
+		c_dirtsnow = minetest.get_content_id("default:dirt_with_snow")
+		c_snow = minetest.get_content_id("default:snowblock")
+		c_sand = minetest.get_content_id("default:sand")
+		c_ice = minetest.get_content_id("default:ice")
+	end
 
 	local vm, emin, emax = minetest.get_mapgen_object("voxelmanip")
 	vm:get_data(data)
@@ -145,7 +175,7 @@ local function generate(minp, maxp, seed)
 
 	for z = minp.z, maxp.z do
 		for x = minp.x, maxp.x do
-			local ivm = a:index(x, minp.y, z)
+			local ivm = a:index(x, maxp.y+1, z)
 			local ground_above = false
 			local temperature
 			if use_biomes then
@@ -161,8 +191,8 @@ local function generate(minp, maxp, seed)
 				if use_distort then
 					local xn = noise_x_map[nid]
 					local zn = noise_z_map[nid]
-					local x0 = math.floor(xn)
+					local x0 = floor(xn)
-					local z0 = math.floor(zn)
+					local z0 = floor(zn)
 
 					local i0 = i_origin + z0*incr + x0
 					local i1 = i0+1
@@ -170,13 +200,12 @@ local function generate(minp, maxp, seed)
 					local i3 = i2-1
 
 					terrain = interp(terrain_map[i0], terrain_map[i1], terrain_map[i2], terrain_map[i3], xn-x0, zn-z0)
-					lake = math.min(lake_map[i0], lake_map[i1], lake_map[i2], lake_map[i3])
+					lake = min(lake_map[i0], lake_map[i1], lake_map[i2], lake_map[i3])
 				end
 
 				if y <= maxp.y then
 
 					local is_lake = lake > terrain
-					local ivm = a:index(x, y, z)
 					if y <= terrain then
 						if not use_biomes or y <= terrain-1 or ground_above then
 							data[ivm] = c_stone
@@ -205,7 +234,7 @@ local function generate(minp, maxp, seed)
 
 				ground_above = y <= terrain
 
-				ivm = ivm + ystride
+				ivm = ivm - ystride
 				if use_distort then
 					nid = nid + incrY
 				end
@@ -233,18 +262,17 @@ local function generate(minp, maxp, seed)
 	vm:calc_lighting()
 	vm:update_liquids()
 	vm:write_to_map()
-	local t1 = os.clock()
 
-	local t = t1-t0
+	local t = os.clock()-t0
 	ngen = ngen + 1
 	sumtime = sumtime + t
 	sumtime2 = sumtime2 + t*t
-	print(("[mapgen_rivers] Done in %5.3f s"):format(t))
+	minetest.log("verbose", ("[mapgen_rivers] Done in %5.3f s"):format(t))
 end
 
 minetest.register_on_generated(generate)
 minetest.register_on_shutdown(function()
 	local avg = sumtime / ngen
 	local std = math.sqrt(sumtime2/ngen - avg*avg)
-	print(("[mapgen_rivers] Mapgen statistics:\n- Mapgen calls: %4d\n- Mean time: %5.3f s\n- Standard deviation: %5.3f s"):format(ngen, avg, std))
+	minetest.log("action", ("[mapgen_rivers] Mapgen statistics:\n- Mapgen calls: %4d\n- Mean time: %5.3f s\n- Standard deviation: %5.3f s"):format(ngen, avg, std))
 end)

load.lua

@@ -1,12 +1,15 @@
 local worldpath = mapgen_rivers.world_data_path
 
+local floor = math.floor
+local sbyte, schar = string.byte, string.char
+local unpk = unpack
+
 function mapgen_rivers.load_map(filename, bytes, signed, size, converter)
 	local file = io.open(worldpath .. filename, 'rb')
 	local data = file:read('*all')
 	if #data < bytes*size then
 		data = minetest.decompress(data)
 	end
-	local sbyte = string.byte
 
 	local map = {}
 
@@ -35,8 +38,6 @@ function mapgen_rivers.load_map(filename, bytes, signed, size, converter)
 	return map
 end
 
-local sbyte = string.byte
-
 local loader_mt = {
 	__index = function(loader, i)
 		local file = loader.file
@@ -75,9 +76,6 @@ end
 function mapgen_rivers.write_map(filename, data, bytes)
 	local size = #data
 	local file = io.open(worldpath .. filename, 'wb')
-	local mfloor = math.floor
-	local schar = string.char
-	local upack = unpack
 
 	local bytelist = {}
 	for j=1, bytes do
@@ -85,15 +83,15 @@ function mapgen_rivers.write_map(filename, data, bytes)
 	end
 
 	for i=1, size do
-		local n = mfloor(data[i])
+		local n = floor(data[i])
 		data[i] = n
 		for j=bytes, 2, -1 do
 			bytelist[j] = n % 256
-			n = mfloor(n / 256)
+			n = floor(n / 256)
 		end
 		bytelist[1] = n % 256
 
-		file:write(schar(upack(bytelist)))
+		file:write(schar(unpk(bytelist)))
 	end
 
 	file:close()

mod.conf

@@ -1,4 +1,3 @@
 name = mapgen_rivers
 title = Map generator with realistic rivers
-depends = default
+optional_depends = biomegen, default
-optional_depends = biomegen

noises.lua

@@ -1,80 +0,0 @@
-local def_setting = mapgen_rivers.define_setting
-
-mapgen_rivers.noise_params = {
-	base = def_setting('np_base', 'noise', {
-		offset = 0,
-		scale = 300,
-		seed = 2469,
-		octaves = 8,
-		spread = {x=2048, y=2048, z=2048},
-		persist = 0.6,
-		lacunarity = 2,
-		flags = "eased",
-	}),
-
-	distort_x = def_setting('np_distort_x', 'noise', {
-		offset = 0,
-		scale = 1,
-		seed = -4574,
-		spread = {x=64, y=32, z=64},
-		octaves = 3,
-		persistence = 0.75,
-		lacunarity = 2,
-	}),
-
-	distort_z = def_setting('np_distort_z', 'noise', {
-		offset = 0,
-		scale = 1,
-		seed = -7940,
-		spread = {x=64, y=32, z=64},
-		octaves = 3,
-		persistence = 0.75,
-		lacunarity = 2,
-	}),
-
-	distort_amplitude = def_setting('np_distort_amplitude', 'noise', {
-		offset = 0,
-		scale = 10,
-		seed = 676,
-		spread = {x=1024, y=1024, z=1024},
-		octaves = 5,
-		persistence = 0.5,
-		lacunarity = 2,
-		flags = "absvalue",
-	}),
-
-	heat = minetest.get_mapgen_setting_noiseparams('mg_biome_np_heat'),
-	heat_blend = minetest.get_mapgen_setting_noiseparams('mg_biome_np_heat_blend'),
-}
-
--- Convert to number because Minetest API is not able to do it cleanly...
-for name, np in pairs(mapgen_rivers.noise_params) do
-	for field, value in pairs(np) do
-		if field ~= 'flags' and type(value) == 'string' then
-			np[field] = tonumber(value) or value
-		elseif field == 'spread' then
-			for dir, v in pairs(value) do
-				value[dir] = tonumber(v) or v
-			end
-		end
-	end
-end
-
-local heat = mapgen_rivers.noise_params.heat
-local base = mapgen_rivers.noise_params.base
-local settings = mapgen_rivers.settings
-heat.offset = heat.offset + settings.sea_level * settings.elevation_chill
-base.spread.x = base.spread.x / settings.blocksize
-base.spread.y = base.spread.y / settings.blocksize
-base.spread.z = base.spread.z / settings.blocksize
-
-for name, np in pairs(mapgen_rivers.noise_params) do
-	local lac = np.lacunarity or 2
-	if lac > 1 then
-		local omax = math.floor(math.log(math.min(np.spread.x, np.spread.y, np.spread.z)) / math.log(lac))+1
-		if np.octaves > omax then
-			print("[mapgen_rivers] Noise " .. name .. ": 'octaves' reduced to " .. omax)
-			np.octaves = omax
-		end
-	end
-end

polygons.lua

@@ -11,8 +11,9 @@ dofile(modpath .. 'load.lua')
 
 mapgen_rivers.grid = {}
 
-local X = mapgen_rivers.settings.grid_x_size
+local blocksize = mapgen_rivers.settings.blocksize
-local Z = mapgen_rivers.settings.grid_z_size
+local X = math.floor(mapgen_rivers.settings.map_x_size / blocksize)
+local Z = math.floor(mapgen_rivers.settings.map_z_size / blocksize)
 
 local function offset_converter(o)
 	return (o + 0.5) * (1/256)
@@ -33,7 +34,7 @@ if first_mapgen then
 	-- Generate a map!!
 	local pregenerate = dofile(mapgen_rivers.modpath .. '/pregenerate.lua')
 	minetest.register_on_mods_loaded(function()
-		print('[mapgen_rivers] Generating grid')
+		minetest.log("action", '[mapgen_rivers] Generating grid, this may take a while...')
 		pregenerate(load_all)
 
 		if load_all then
@@ -58,9 +59,9 @@ if not (first_mapgen and load_all) then
 
 	minetest.register_on_mods_loaded(function()
 		if load_all then
-			print('[mapgen_rivers] Loading full grid')
+			minetest.log("action", '[mapgen_rivers] Loading full grid')
 		else
-			print('[mapgen_rivers] Loading grid as interactive loaders')
+			minetest.log("action", '[mapgen_rivers] Loading grid as interactive loaders')
 		end
 		local grid = mapgen_rivers.grid
 
@@ -80,7 +81,6 @@ local function index(x, z)
 	return z*X+x+1
 end
 
-local blocksize = mapgen_rivers.settings.blocksize
 local min_catchment = mapgen_rivers.settings.min_catchment
 local max_catchment = mapgen_rivers.settings.max_catchment
 
@@ -90,16 +90,19 @@ if mapgen_rivers.settings.center then
 	map_offset.z = blocksize*Z/2
 end
 
+-- Localize for performance
+local floor, ceil, min, max, abs = math.floor, math.ceil, math.min, math.max, math.abs
+
 local min_catchment = mapgen_rivers.settings.min_catchment / (blocksize*blocksize)
 local wpower = mapgen_rivers.settings.river_widening_power
 local wfactor = 1/(2*blocksize * min_catchment^wpower)
 local function river_width(flow)
-	flow = math.abs(flow)
+	flow = abs(flow)
 	if flow < min_catchment then
 		return 0
 	end
 
-	return math.min(wfactor * flow ^ wpower, 1)
+	return min(wfactor * flow ^ wpower, 1)
 end
 
 local noise_heat -- Need a large-scale noise here so no heat blend
@@ -138,8 +141,8 @@ local function make_polygons(minp, maxp)
 
 	local polygons = {}
 	-- Determine the minimum and maximum coordinates of the polygons that could be on the chunk, knowing that they have an average size of 'blocksize' and a maximal offset of 0.5 blocksize.
-	local xpmin, xpmax = math.max(math.floor((minp.x+map_offset.x)/blocksize - 0.5), 0), math.min(math.ceil((maxp.x+map_offset.x)/blocksize + 0.5), X-2)
+	local xpmin, xpmax = max(floor((minp.x+map_offset.x)/blocksize - 0.5), 0), min(ceil((maxp.x+map_offset.x)/blocksize + 0.5), X-2)
-	local zpmin, zpmax = math.max(math.floor((minp.z+map_offset.z)/blocksize - 0.5), 0), math.min(math.ceil((maxp.z+map_offset.z)/blocksize + 0.5), Z-2)
+	local zpmin, zpmax = max(floor((minp.z+map_offset.z)/blocksize - 0.5), 0), min(ceil((maxp.z+map_offset.z)/blocksize + 0.5), Z-2)
 
 	-- Iterate over the polygons
 	for xp = xpmin, xpmax do
@@ -165,8 +168,8 @@ local function make_polygons(minp, maxp)
 
 			local bounds = {} -- Will be a list of the intercepts of polygon edges for every Z position (scanline algorithm)
 			-- Calculate the min and max Z positions 
-			local zmin = math.max(math.floor(math.min(unpack(poly_z)))+1, minp.z)
+			local zmin = max(floor(min(unpack(poly_z)))+1, minp.z)
-			local zmax = math.min(math.floor(math.max(unpack(poly_z))), maxp.z)
+			local zmax = min(floor(max(unpack(poly_z))), maxp.z)
 			-- And initialize the arrays
 			for z=zmin, zmax do
 				bounds[z] = {}
@@ -176,14 +179,14 @@ local function make_polygons(minp, maxp)
 			for i2=1, 4 do -- Loop on 4 edges
 				local z1, z2 = poly_z[i1], poly_z[i2]
 				-- Calculate the integer Z positions over which this edge spans
-				local lzmin = math.floor(math.min(z1, z2))+1
+				local lzmin = floor(min(z1, z2))+1
-				local lzmax = math.floor(math.max(z1, z2))
+				local lzmax = floor(max(z1, z2))
 				if lzmin <= lzmax then -- If there is at least one position in it
 					local x1, x2 = poly_x[i1], poly_x[i2]
 					-- Calculate coefficient of the equation defining the edge: X=aZ+b
 					local a = (x1-x2) / (z1-z2)
 					local b = (x1 - a*z1)
-					for z=math.max(lzmin, minp.z), math.min(lzmax, maxp.z) do
+					for z=max(lzmin, minp.z), min(lzmax, maxp.z) do
 						-- For every Z position involved, add the intercepted X position in the table
 						table.insert(bounds[z], a*z+b)
 					end
@@ -194,11 +197,11 @@ local function make_polygons(minp, maxp)
 				-- Now sort the bounds list
 				local zlist = bounds[z]
 				table.sort(zlist)
-				local c = math.floor(#zlist/2)
+				local c = floor(#zlist/2)
 				for l=1, c do
 					-- Take pairs of X coordinates: all positions between them belong to the polygon.
-					local xmin = math.max(math.floor(zlist[l*2-1])+1, minp.x)
+					local xmin = max(floor(zlist[l*2-1])+1, minp.x)
-					local xmax = math.min(math.floor(zlist[l*2]), maxp.x)
+					local xmax = min(floor(zlist[l*2]), maxp.x)
 					local i = (z-minp.z) * chulens + (xmin-minp.x) + 1
 					for x=xmin, xmax do
 						-- Fill the map at these places
@@ -220,16 +223,16 @@ local function make_polygons(minp, maxp)
 			local riverD = river_width(rivers[iD])
 			if glaciers then -- Widen the river
 				if get_temperature(poly_x[1], poly_dem[1], poly_z[1]) < 0 then
-					riverA = math.min(riverA*glacier_factor, 1)
+					riverA = min(riverA*glacier_factor, 1)
 				end
 				if get_temperature(poly_x[2], poly_dem[2], poly_z[2]) < 0 then
-					riverB = math.min(riverB*glacier_factor, 1)
+					riverB = min(riverB*glacier_factor, 1)
 				end
 				if get_temperature(poly_x[3], poly_dem[3], poly_z[3]) < 0 then
-					riverC = math.min(riverC*glacier_factor, 1)
+					riverC = min(riverC*glacier_factor, 1)
 				end
 				if get_temperature(poly_x[4], poly_dem[4], poly_z[4]) < 0 then
-					riverD = math.min(riverD*glacier_factor, 1)
+					riverD = min(riverD*glacier_factor, 1)
 				end
 			end
 

pregenerate.lua

@@ -5,6 +5,7 @@ local blocksize = mapgen_rivers.settings.blocksize
 local tectonic_speed = mapgen_rivers.settings.tectonic_speed
 
 local np_base = table.copy(mapgen_rivers.noise_params.base)
+np_base.spread = vector.divide(np_base.spread, blocksize)
 
 local evol_params = mapgen_rivers.settings.evol_params
 
@@ -17,6 +18,10 @@ local function pregenerate(keep_loaded)
 	local grid = mapgen_rivers.grid
 	local size = grid.size
 
+	if size.x * size.y > 4e6 then
+		minetest.log("warning", "[mapgen_rivers] You are going to generate a very large grid (>4M nodes). If you experience problems, you should increase blocksize or reduce map size.")
+	end
+
 	local seed = tonumber(minetest.get_mapgen_setting("seed"))
 	np_base.seed = (np_base.seed or 0) + seed
 
@@ -33,7 +38,7 @@ local function pregenerate(keep_loaded)
 	local tectonic_step = tectonic_speed * time_step
 	collectgarbage()
 	for i=1, niter do
-		print("[mapgen_rivers] Iteration " .. i .. " of " .. niter)
+		minetest.log("info", "[mapgen_rivers] Iteration " .. i .. " of " .. niter)
 
 		model:diffuse(time_step)
 		model:flow()

settings.lua

@@ -1,7 +1,7 @@
 local mtsettings = minetest.settings
 local mgrsettings = Settings(minetest.get_worldpath() .. '/mapgen_rivers.conf')
 
-mapgen_rivers.version = "1.0.1"
+mapgen_rivers.version = "1.0.2-dev1"
 
 local previous_version_mt = mtsettings:get("mapgen_rivers_version") or "0.0"
 local previous_version_mgr = mgrsettings:get("version") or "0.0"
@@ -19,13 +19,33 @@ end
 mtsettings:set("mapgen_rivers_version", mapgen_rivers.version)
 mgrsettings:set("version", mapgen_rivers.version)
 
+local defaults
+do
+	local f = io.open(mapgen_rivers.modpath .. "/settings_default.json")
+	defaults = minetest.parse_json(f:read("*all"))
+	f:close()
+end
+
+-- Convert strings to numbers in noise params because Minetest API is not able to do it cleanly...
+local function clean_np(np)
+	for field, value in pairs(np) do
+		if field ~= 'flags' and type(value) == 'string' then
+			np[field] = tonumber(value) or value
+		elseif field == 'spread' then
+			for dir, v in pairs(value) do
+				value[dir] = tonumber(v) or v
+			end
+		end
+	end
+end
+
 function mapgen_rivers.define_setting(name, dtype, default)
 	if dtype == "number" or dtype == "string" then
 		local v = mgrsettings:get(name)
 		if v == nil then
 			v = mtsettings:get('mapgen_rivers_' .. name)
 			if v == nil then
-				v = default
+				v = defaults[name]
 			end
 			mgrsettings:set(name, v)
 		end
@@ -39,7 +59,7 @@ function mapgen_rivers.define_setting(name, dtype, default)
 		if v == nil then
 			v = mtsettings:get_bool('mapgen_rivers_' .. name)
 			if v == nil then
-				v = default
+				v = defaults[name]
 			end
 			mgrsettings:set_bool(name, v)
 		end
@@ -49,10 +69,11 @@ function mapgen_rivers.define_setting(name, dtype, default)
 		if v == nil then
 			v = mtsettings:get_np_group('mapgen_rivers_' .. name)
 			if v == nil then
-				v = default
+				v = defaults[name]
 			end
 			mgrsettings:set_np_group(name, v)
 		end
+		clean_np(v)
 		return v
 	end
 end
@@ -60,33 +81,46 @@ end
 local def_setting = mapgen_rivers.define_setting
 
 mapgen_rivers.settings = {
-	center = def_setting('center', 'bool', true),
+	center = def_setting('center', 'bool'),
-	blocksize = def_setting('blocksize', 'number', 15),
+	blocksize = def_setting('blocksize', 'number'),
 	sea_level = tonumber(minetest.get_mapgen_setting('water_level')),
-	min_catchment = def_setting('min_catchment', 'number', 3600),
+	min_catchment = def_setting('min_catchment', 'number'),
-	river_widening_power = def_setting('river_widening_power', 'number', 0.5),
+	river_widening_power = def_setting('river_widening_power', 'number'),
-	riverbed_slope = def_setting('riverbed_slope', 'number', 0.4),
+	riverbed_slope = def_setting('riverbed_slope', 'number'),
-	distort = def_setting('distort', 'bool', true),
+	distort = def_setting('distort', 'bool'),
-	biomes = def_setting('biomes', 'bool', true),
+	biomes = def_setting('biomes', 'bool'),
-	glaciers = def_setting('glaciers', 'bool', false),
+	glaciers = def_setting('glaciers', 'bool'),
-	glacier_factor = def_setting('glacier_factor', 'number', 8),
+	glacier_factor = def_setting('glacier_factor', 'number'),
-	elevation_chill = def_setting('elevation_chill', 'number', 0.25),
+	elevation_chill = def_setting('elevation_chill', 'number'),
 
-	grid_x_size = def_setting('grid_x_size', 'number', 1000),
+	map_x_size = def_setting('map_x_size', 'number'),
-	grid_z_size = def_setting('grid_z_size', 'number', 1000),
+	map_z_size = def_setting('map_z_size', 'number'),
 	evol_params = {
-		K = def_setting('river_erosion_coef', 'number', 0.5),
+		K = def_setting('river_erosion_coef', 'number'),
-		m = def_setting('river_erosion_power', 'number', 0.4),
+		m = def_setting('river_erosion_power', 'number'),
-		d = def_setting('diffusive_erosion', 'number', 0.5),
+		d = def_setting('diffusive_erosion', 'number'),
-		compensation_radius = def_setting('compensation_radius', 'number', 50),
+		compensation_radius = def_setting('compensation_radius', 'number'),
 	},
-	tectonic_speed = def_setting('tectonic_speed', 'number', 70),
+	tectonic_speed = def_setting('tectonic_speed', 'number'),
-	evol_time = def_setting('evol_time', 'number', 10),
+	evol_time = def_setting('evol_time', 'number'),
-	evol_time_step = def_setting('evol_time_step', 'number', 1),
+	evol_time_step = def_setting('evol_time_step', 'number'),
 
 	load_all = mtsettings:get_bool('mapgen_rivers_load_all')
 }
 
+mapgen_rivers.noise_params = {
+	base = def_setting("np_base", "noise"),
+	distort_x = def_setting("np_distort_x", "noise"),
+	distort_z = def_setting("np_distort_z", "noise"),
+	distort_amplitude = def_setting("np_distort_amplitude", "noise"),
+
+	heat = minetest.get_mapgen_setting_noiseparams('mg_biome_np_heat'),
+	heat_blend = minetest.get_mapgen_setting_noiseparams('mg_biome_np_heat_blend'),
+}
+
+mapgen_rivers.noise_params.heat.offset = mapgen_rivers.noise_params.heat.offset +
+		mapgen_rivers.settings.sea_level * mapgen_rivers.settings.elevation_chill
+
 local function write_settings()
 	mgrsettings:write()
 end

settings_default.json

@@ -0,0 +1,68 @@
+{
+	"version": "1.0.2",
+
+	"center": true,
+	"water_level": 1,
+	"blocksize": 15,
+	"min_catchment": 3600,
+	"river_widening_power": 0.5,
+	"riverbed_slope": 0.4,
+	"distort": true,
+	"biomes": true,
+	"glaciers": false,
+	"glacier_factor": 8,
+	"elevation_chill": 0.25,
+
+	"map_x_size": 15000,
+	"map_z_size": 15000,
+	"river_erosion_coef": 0.5,
+	"river_erosion_power": 0.4,
+	"diffusive_erosion": 0.5,
+	"compensation_radius": 50,
+	"tectonic_speed": 70,
+	"evol_time": 10,
+	"evol_time_step": 1,
+	"load_all": false,
+
+	"np_base": {
+		"offset": 0,
+		"scale": 300,
+		"seed": 2469,
+		"octaves": 8,
+		"spread": {"x": 2048, "y": 2048, "z": 2048},
+		"persist": 0.6,
+		"lacunarity": 2.0,
+		"flags": "eased"
+	},
+
+	"np_distort_x": {
+		"offset": 0,
+		"scale": 1,
+		"seed": -4574,
+		"octaves": 3,
+		"spread": {"x": 64, "y": 32, "z": 64},
+		"persist": 0.75,
+		"lacunarity": 2.0
+	},
+
+	"np_distort_z": {
+		"offset": 0,
+		"scale": 1,
+		"seed": -7940,
+		"octaves": 3,
+		"spread": {"x": 64, "y": 32, "z": 64},
+		"persist": 0.75,
+		"lacunarity": 2.0
+	},
+
+	"np_distort_amplitude": {
+		"offset": 0,
+		"scale": 10,
+		"seed": 676,
+		"octaves": 5,
+		"spread": {"x": 1024, "y": 1024, "z": 1024},
+		"persist": 0.5,
+		"lacunarity": 2.0,
+		"flags": "absvalue"
+	}
+}

settingtypes.txt

@@ -3,19 +3,25 @@
 #    Whether the map should be centered at x=0, z=0.
 mapgen_rivers_center (Center map) bool true
 
-#    Represents horizontal map scale. Every cell of the grid will be upscaled to
+#    Every cell of the river grid will represent a square of this size.
-#    a square of this size.
+#    A lower value will result in more detailed terrain and finer computation
-#    For example if the grid size is 1000x1000 and block size is 12,
+#    of rivers, but will be slower to generate and use more resources.
-#    the actual size of the map will be 12000.
+#
+#    WARNING: Excessively low values may cause crashes at pre-generation, due to
+#    memory issues
 mapgen_rivers_blocksize (Block size) float 15.0 2.0 100.0
 
-#    X size of the grid being generated
+#    X size of the map being generated
-#    Actual size of the map is grid_x_size * blocksize
+#
-mapgen_rivers_grid_x_size (Grid X size) int 1000 50 5000
+#    X size of the river grid will be this/blocksize
+#    When increasing, it is recommended to increase blocksize too
+mapgen_rivers_map_x_size (Map X size) int 15000 500 66000
 
-#    Z size of the grid being generated
+#    Z size of the map being generated
-#    Actual size of the map is grid_z_size * blocksize
+#
-mapgen_rivers_grid_z_size (Grid Z size) int 1000 50 5000
+#    Z size of the river grid will be this/blocksize
+#    When increasing, it is recommended to increase blocksize too
+mapgen_rivers_map_z_size (Map Z size) int 15000 500 66000
 
 #    Minimal catchment area for a river to be drawn, in square nodes
 #    Lower value means bigger river density
@@ -23,7 +29,7 @@ mapgen_rivers_min_catchment (Minimal catchment area) float 3600.0 100.0 1000000.
 
 #    Coefficient describing how rivers widen when merging.
 #    Riwer width is a power law W = a*D^p. D is river flow and p is this parameter.
-#    Higher value means a river needs to receive more tributaries to grow in width.
+#    Higher value means that a river will grow more when receiving a tributary.
 #    Note that a river can never exceed 2*blocksize.
 mapgen_rivers_river_widening_power (River widening power) float 0.5 0.0 1.0
 

terrainlib_lua/erosion.lua

@@ -1,7 +1,13 @@
 -- erosion.lua
 
+-- This is the main file of terrainlib_lua. It registers the EvolutionModel object and some of the 
+
 local function erode(model, time)
-	--local tinsert = table.insert
+	-- Apply river erosion on the model
+	-- Erosion model is based on the simplified version of the stream-power law Ey = K×A^m×S
+	-- where Ey is the vertical erosion speed, A catchment area of the river, S slope along the river, m and K local constants.
+	-- It is equivalent to considering a horizontal erosion wave travelling at Ex = K×A^m, and this latter approach allows much greather time steps so it is used here.
+	-- For each point, instead of moving upstream and see what point the erosion wave would reach, we move downstream and see from which point the erosion wave would reach the given point, then we can set the elevation.
 	local mmin, mmax = math.min, math.max
 	local dem = model.dem
 	local dirs = model.dirs
@@ -22,9 +28,9 @@ local function erode(model, time)
 
 	if scalars then
 		for i=1, X*Y do
-			local etime = 1 / (K*rivers[i]^m)
+			local etime = 1 / (K*rivers[i]^m) -- Inverse of erosion speed (Ex); time needed for the erosion wave to move through the river section.
 			erosion_time[i] = etime
-			lakes[i] = mmax(lakes[i], dem[i], sea_level)
+			lakes[i] = mmax(lakes[i], dem[i], sea_level) -- Use lake/sea surface if higher than ground level, because rivers can not erode below.
 		end
 	else
 		for i=1, X*Y do
@@ -39,10 +45,12 @@ local function erode(model, time)
 		local remaining = time
 		local new_elev
 		while true do
+			-- Explore downstream until we find the point 'iw' from which the erosion wave will reach 'i'
 			local inext = iw
 			local d = dirs[iw]
 
-			if d == 0 then
+			-- Follow the river downstream (move 'iw')
+			if d == 0 then -- If no flow direction, we reach the border of the map: set elevation to the latest node's elev and abort.
 				new_elev = lakes[iw]
 				break
 			elseif d == 1 then
@@ -56,13 +64,13 @@ local function erode(model, time)
 			end
 
 			local etime = erosion_time[iw]
-			if remaining <= etime then
+			if remaining <= etime then -- We have found the node from which the erosion wave will take 'time' to arrive to 'i'.
 				local c = remaining / etime
-				new_elev = (1-c) * lakes[iw] + c * lakes[inext]
+				new_elev = (1-c) * lakes[iw] + c * lakes[inext] -- Interpolate linearly between the two nodes
 				break
 			end
 
-			remaining = remaining - etime
+			remaining = remaining - etime -- If we still don't reach the target time, decrement time and move to next point.
 			iw = inext
 		end
 
@@ -71,50 +79,55 @@ local function erode(model, time)
 end
 
 local function diffuse(model, time)
-    local mmax = math.max
+	-- Apply diffusion using finite differences methods
-    local dem = model.dem
+	-- Adapted for small radiuses
-    local X, Y = dem.X, dem.Y
+	local mmax = math.max
-    local d = model.params.d
+	local dem = model.dem
-    local dmax = d
+	local X, Y = dem.X, dem.Y
-    if type(d) == "table" then
+	local d = model.params.d
-        dmax = -math.huge
+	-- 'd' is equal to 4 times the diffusion coefficient
-        for i=1, X*Y do
+	local dmax = d
-            dmax = mmax(dmax, d[i])
+	if type(d) == "table" then
-        end
+		dmax = -math.huge
-    end
+		for i=1, X*Y do
+			dmax = mmax(dmax, d[i])
+		end
+	end
 
-    local diff = dmax * time
+	local diff = dmax * time
-    local niter = math.floor(diff) + 1
+	-- diff should never exceed 1 per iteration.
-    local ddiff = diff / niter
+	-- If needed, we will divide the process in enough iterations so that 'ddiff' is below 1.
+	local niter = math.floor(diff) + 1
+	local ddiff = diff / niter
 
-    local temp = {}
+	local temp = {}
-    for n=1, niter do
+	for n=1, niter do
-        local i = 1
+		local i = 1
-        for y=1, Y do
+		for y=1, Y do
-            local iN = (y==1) and 0 or -X
+			local iN = (y==1) and 0 or -X
-            local iS = (y==Y) and 0 or X
+			local iS = (y==Y) and 0 or X
-            for x=1, X do
+			for x=1, X do
-                local iW = (x==1) and 0 or -1
+				local iW = (x==1) and 0 or -1
-                local iE = (x==X) and 0 or 1
+				local iE = (x==X) and 0 or 1
-                temp[i] = (dem[i+iN]+dem[i+iE]+dem[i+iS]+dem[i+iW])*0.25 - dem[i]
+				-- Laplacian Δdem × 1/4
-                i = i + 1
+				temp[i] = (dem[i+iN]+dem[i+iE]+dem[i+iS]+dem[i+iW])*0.25 - dem[i]
-            end
+				i = i + 1
-        end
+			end
+		end
 
-        for i=1, X*Y do
+		for i=1, X*Y do
-            dem[i] = dem[i] + temp[i]*ddiff
+			dem[i] = dem[i] + temp[i]*ddiff
-        end
+		end
-    end
+	end
-    -- TODO Test this
 end
 
 local modpath = ""
 if minetest then
-    if minetest.global_exists('mapgen_rivers') then
+	if minetest.global_exists('mapgen_rivers') then
-        modpath = mapgen_rivers.modpath .. "terrainlib_lua/"
+		modpath = mapgen_rivers.modpath .. "terrainlib_lua/"
-    else
+	else
-        modpath = minetest.get_modpath(minetest.get_current_modname()) .. "terrainlib_lua/"
+		modpath = minetest.get_modpath(minetest.get_current_modname()) .. "terrainlib_lua/"
-    end
+	end
 end
 
 local rivermapper = dofile(modpath .. "rivermapper.lua")
@@ -126,6 +139,7 @@ local function flow(model)
 end
 
 local function uplift(model, time)
+	-- Raises the terrain according to uplift rate (model.params.uplift)
 	local dem = model.dem
 	local X, Y = dem.X, dem.Y
 	local uplift_rate = model.params.uplift
@@ -142,6 +156,7 @@ local function uplift(model, time)
 end
 
 local function noise(model, time)
+	-- Adds noise to the terrain according to noise depth (model.params.noise)
 	local random = math.random
 	local dem = model.dem
 	local noise_depth = model.params.noise * 2 * time
@@ -151,35 +166,43 @@ local function noise(model, time)
 	end
 end
 
+-- Isostasy
+-- This is the geological phenomenon that makes the lithosphere "float" over the underlying layers.
+-- One of the key implications is that when a very large mass is removed from the ground, the lithosphere reacts by moving upward. This compensation only occurs at large scale (as the lithosphere is not flexible enough for small scale adjustments) so the implementation is using a very large-window Gaussian blur of the elevation array.
+
+-- This implementation is quite simplistic, it does not do a mass balance of the lithosphere as this would introduce too many parameters. Instead, it defines a reference equilibrium elevation, and the ground will react toward this elevation (at the scale of the gaussian window).
+-- A change in reference isostasy during the run can also be used to simulate tectonic forcing, like making a new mountain range appear.
 local function define_isostasy(model, ref, link)
-    ref = ref or model.dem
+	ref = ref or model.dem
-    if link then
+	if link then
-        model.isostasy_ref = ref
+		model.isostasy_ref = ref
-        return
+		return
-    end
+	end
 
-    local X, Y = ref.X, ref.Y
+	local X, Y = ref.X, ref.Y
-    local ref2 = model.isostasy_ref or {X=X, Y=Y}
+	local ref2 = model.isostasy_ref or {X=X, Y=Y}
-    model.isostasy_ref = ref2
+	model.isostasy_ref = ref2
-    for i=1, X*Y do
+	for i=1, X*Y do
-        ref2[i] = ref[i]
+		ref2[i] = ref[i]
-    end
+	end
 
-    return ref2
+	return ref2
 end
 
+-- Apply isostasy
 local function isostasy(model)
 	local dem = model.dem
 	local X, Y = dem.X, dem.Y
 	local temp = {X=X, Y=Y}
 	local ref = model.isostasy_ref
 	for i=1, X*Y do
-		temp[i] = ref[i] - dem[i]
+		temp[i] = ref[i] - dem[i] -- Compute the difference between the ground level and the target level
 	end
 
+	-- Blur the difference map using Gaussian blur
 	gaussian.gaussian_blur_approx(temp, model.params.compensation_radius, 4)
 	for i=1, X*Y do
-		dem[i] = dem[i] + temp[i]
+		dem[i] = dem[i] + temp[i] -- Apply the difference
 	end
 end
 

terrainlib_lua/gaussian.lua

@@ -71,20 +71,6 @@ local function box_blur_2d(map1, size, map2)
 	return map1
 end
 
---[[local function gaussian_blur(map, std, tail)
-	local exp = math.exp
-
-	local kernel_mid = math.ceil(std*tail) + 1
-	local kernel_size = kernel_mid * 2 - 1
-	local kernel = {}
-	local cst1 = 1/(std*(2*math.pi)^0.5)
-	local cst2 = -1/(2*std^2)
-	for i=1, kernel_size do
-		kernel[i] = cst1 * exp((i-kernel_mid)^2 * cst2)
-	end
-
-	]]
-
 local function gaussian_blur_approx(map, sigma, n, map2)
 	map2 = map2 or {}
 	local sizes = get_box_size(sigma, n)

terrainlib_lua/rivermapper.lua

@@ -9,24 +9,26 @@
 --
 -- Big thanks to them for releasing this paper under a free license ! :)
 
--- The algorithm here makes use of most of the paper's concepts, including the Planar Boruvka algorithm.
+-- The algorithm here makes use of most of the paper's concepts, including the Planar Borůvka algorithm.
 -- Only flow_local and accumulate_flow are custom algorithms.
 
+
 local function flow_local_semirandom(plist)
+	-- Determines how water should flow at 1 node scale.
+	-- The straightforward approach would be "Water will flow to the lowest of the 4 neighbours", but here water flows to one of the lower neighbours, chosen randomly, but probability depends on height difference.
+	-- This makes rivers better follow the curvature of the topography at large scale, and be less biased by pure N/E/S/W directions.
+	-- 'plist': array of downward height differences (0 if upward)
 	local sum = 0
 	for i=1, #plist do
-		sum = sum + plist[i]
+		sum = sum + plist[i] -- Sum of probabilities
 	end
-	--for _, p in ipairs(plist) do
+
-		--sum = sum + p
-	--end
 	if sum == 0 then
 		return 0
 	end
 	local r = math.random() * sum
 	for i=1, #plist do
 		local p = plist[i]
-	--for i, p in ipairs(plist) do
 		if r < p then
 			return i
 		end
@@ -35,11 +37,14 @@ local function flow_local_semirandom(plist)
 	return 0
 end
 
+-- Maybe implement more flow methods in the future?
 local flow_methods = {
 	semirandom = flow_local_semirandom,
 }
 
-local function flow_routing(dem, dirs, lakes, method)
+-- Applies all steps of the flow routing, to calculate flow direction for every node, and lake surface elevation.
+-- It's quite a hard piece of code, but we will go step by step and explain what's going on, so stay with me and... let's goooooooo!
+local function flow_routing(dem, dirs, lakes, method) -- 'dirs' and 'lakes' are optional tables to reuse for memory optimization, they may contain any data.
 	method = method or 'semirandom'
 	local flow_local = flow_methods[method] or flow_local_semirandom
 
@@ -47,7 +52,6 @@ local function flow_routing(dem, dirs, lakes, method)
 	lakes = lakes or {}
 
 	-- Localize for performance
-	--local tinsert = table.insert
 	local tremove = table.remove
 	local mmax = math.max
 
@@ -62,11 +66,15 @@ local function flow_routing(dem, dirs, lakes, method)
 		dirs2[i] = 0
 	end
 
+	----------------------------------------
+	-- STEP 1: Find local flow directions --
+	----------------------------------------
+	-- Use the local flow function and fill the flow direction tables
 	local singular = {}
 	for y=1, Y do
 		for x=1, X do
 			local zi = dem[i]
-			local plist = {
+			local plist = { -- Get the height difference of the 4 neighbours (and 0 if uphill)
 				y<Y and mmax(zi-dem[i+X], 0) or 0, -- Southward
 				x<X and mmax(zi-dem[i+1], 0) or 0, -- Eastward
 				y>1 and mmax(zi-dem[i-X], 0) or 0, -- Northward
@@ -74,8 +82,10 @@ local function flow_routing(dem, dirs, lakes, method)
 			}
 
 			local d = flow_local(plist)
+			-- 'dirs': Direction toward which water flow
+			-- 'dirs2': Directions from which water comes
 			dirs[i] = d
-			if d == 0 then
+			if d == 0 then -- If water can't flow from this node, add it to the list of singular nodes that will be resolved later
 				singular[#singular+1] = i
 			elseif d == 1 then
 				dirs2[i+X] = dirs2[i+X] + 1
@@ -90,30 +100,39 @@ local function flow_routing(dem, dirs, lakes, method)
 		end
 	end
 
-	-- Compute basins and links
+	--------------------------------------
+	-- STEP 2: Compute basins and links --
+	--------------------------------------
+	-- Now water can flow until it reaches a singular node (which is in most cases the bottom of a depression)
+	-- We will calculate the drainage basin of every singular node (all the nodes from which the water will flow in this singular node, directly or indirectly), make an adjacency list of basins, and find the lowest pass between each pair of adjacent basins (they are potential lake outlets)
 	local nbasins = #singular
 	local basin_id = {}
 	local links = {}
 	local basin_links
 
+	-- Function to analyse a link between two nodes
 	local function add_link(i1, i2, b1, isY)
+		-- i1, i2: coordinates of two nodes
+		-- b1: basin that contains i1
+		-- isY: whether the link is in Y direction
 		local b2
-		if i2 == 0 then
+		-- Note that basin number #0 represents the outside of the map; or if the coordinate is inside the map, means that the basin number is uninitialized.
+		if i2 == 0 then -- If outside the map
 			b2 = 0
 		else
 			b2 = basin_id[i2]
-			if b2 == 0 then
+			if b2 == 0 then -- If basin of i2 is not already computed, skip
 				return
 			end
 		end
-		if b2 ~= b1 then
+		if b2 ~= b1 then -- If these two nodes don't belong to the same basin, we have found a link between two adjacent basins
-			local elev = i2 == 0 and dem[i1] or mmax(dem[i1], dem[i2])
+			local elev = i2 == 0 and dem[i1] or mmax(dem[i1], dem[i2]) -- Elevation of the highest of the two sides of the link (or only i1 if b2 is map outside)
 			local l2 = basin_links[b2]
 			if not l2 then
 				l2 = {}
 				basin_links[b2] = l2
 			end
-			if not l2.elev or l2.elev > elev then
+			if not l2.elev or l2.elev > elev then -- If this link is lower than the lowest registered link between these two basins, register it as the new lowest pass
 				l2.elev = elev
 				l2.i = mmax(i1,i2)
 				l2.is_y = isY
@@ -126,51 +145,48 @@ local function flow_routing(dem, dirs, lakes, method)
 	for i=1, X*Y do
 		basin_id[i] = 0
 	end
-	--for ib, s in ipairs(singular) do
+
 	for ib=1, nbasins do
-		--local s = singular[ib]
+		-- Here we will recursively search upstream from the singular node to determine its drainage basin
-		local queue = {singular[ib]}
+		local queue = {singular[ib]} -- Start with the singular node, then this queue will be filled with water donors neighbours
 		basin_links = {}
 		links[#links+1] = basin_links
-		--tinsert(links, basin_links)
 		while #queue > 0 do
 			local i = tremove(queue)
 			basin_id[i] = ib
-			local d = dirs2[i]
+			local d = dirs2[i] -- Get the directions water is coming from
 
-			if d >= 8 then -- River coming from East
+			-- Iterate through the 4 directions
+			if d >= 8 then -- River coming from the East
 				d = d - 8
 				queue[#queue+1] = i+1
-				--tinsert(queue, i+X)
+			-- If no river is coming from the East, we might be at the limit of two basins, thus we need to test adjacency.
 			elseif i%X > 0 then
 				add_link(i, i+1, ib, false)
-			else
+			else -- If the eastern neighbour is outside the map
 				add_link(i, 0, ib, false)
 			end
 
-			if d >= 4 then -- River coming from South
+			if d >= 4 then -- River coming from the South
 				d = d - 4
 				queue[#queue+1] = i+X
-				--tinsert(queue, i+1)
 			elseif i <= X*(Y-1) then
 				add_link(i, i+X, ib, true)
 			else
 				add_link(i, 0, ib, true)
 			end
 
-			if d >= 2 then -- River coming from West
+			if d >= 2 then -- River coming from the West
 				d = d - 2
 				queue[#queue+1] = i-1
-				--tinsert(queue, i-X)
 			elseif i%X ~= 1 then
 				add_link(i, i-1, ib, false)
 			else
 				add_link(i, 0, ib, false)
 			end
 
-			if d >= 1 then -- River coming from North
+			if d >= 1 then -- River coming from the North
 				queue[#queue+1] = i-X
-				--tinsert(queue, i-1)
 			elseif i > X then
 				add_link(i, i-X, ib, true)
 			else
@@ -186,7 +202,7 @@ local function flow_routing(dem, dirs, lakes, method)
 		nlinks[i] = 0
 	end
 
-	--for ib1, blinks in ipairs(links) do
+	-- Iterate through pairs of adjacent basins, and make the links reciprocal
 	for ib1=1, #links do
 		for ib2, link in pairs(links[ib1]) do
 			if ib2 < ib1 then
@@ -197,6 +213,15 @@ local function flow_routing(dem, dirs, lakes, method)
 		end
 	end
 
+	-----------------------------------------------------
+	-- STEP 3: Compute minimal spanning tree of basins --
+	-----------------------------------------------------
+	-- We've got an adjacency list of basins with the elevation of their links.
+	-- We will build a minimal spanning tree of the basins (where costs are the elevation of the links). As demonstrated by Cordonnier et al., this finds the outlets of the basins, where water would naturally flow. This does not tell in which direction water is flowing, however.
+	-- We will use a version of Borůvka's algorithm, with Mareš' optimizations to approach linear complexity (see paper).
+	-- The concept of Borůvka's algorithm is to take elements and merge them with their lowest neighbour, until all elements are merged.
+	-- Mareš' optimizations mainly consist in skipping elements that have over 8 links, until extra links are removed when other elements are merged.
+	-- Note that for this step we are only working on basins, not grid nodes.
 	local lowlevel = {}
 	for i, n in pairs(nlinks) do
 		if n <= 8 then
@@ -206,6 +231,8 @@ local function flow_routing(dem, dirs, lakes, method)
 
 	local basin_graph = {}
 	for n=1, nbasins do
+		-- Iterate in lowlevel but its contents may change during the loop
+		-- 'next' called with only one argument always returns an element if table is not empty
 		local b1, lnk1 = next(lowlevel)
 		lowlevel[b1] = nil
 
@@ -213,6 +240,7 @@ local function flow_routing(dem, dirs, lakes, method)
 		local lowest = math.huge
 		local lnk1 = links[b1]
 		local i = 0
+		-- Look for lowest link
 		for bn, bdata in pairs(lnk1) do
 			i = i + 1
 			if bdata.elev < lowest then
@@ -221,7 +249,7 @@ local function flow_routing(dem, dirs, lakes, method)
 			end
 		end
 
-		-- Add link to the graph
+		-- Add link to the graph, in both directions
 		local bound = lnk1[b2]
 		local bb1, bb2 = bound[1], bound[2]
 		if not basin_graph[bb1] then
@@ -239,6 +267,7 @@ local function flow_routing(dem, dirs, lakes, method)
 		lnk1[b2] = nil
 		lnk2[b1] = nil
 		nlinks[b2] = nlinks[b2] - 1
+		-- When the number of links is changing, we need to check whether the basin can be added to / removed from 'lowlevel'
 		if nlinks[b2] == 8 then
 			lowlevel[b2] = lnk2
 		end
@@ -247,25 +276,32 @@ local function flow_routing(dem, dirs, lakes, method)
 			local lnkn = links[bn]
 			lnkn[b1] = nil
 
-			if lnkn[b2] then
+			if lnkn[b2] then -- If bassin bn is also linked to b2
-				nlinks[bn] = nlinks[bn] - 1
+				nlinks[bn] = nlinks[bn] - 1 -- Then bassin bn is losing a link because it keeps only one link toward b1/b2 after the merge
 				if nlinks[bn] == 8 then
 					lowlevel[bn] = lnkn
 				end
-			else
+			else -- If bn was linked to b1 but not to b2
-				nlinks[b2] = nlinks[b2] + 1
+				nlinks[b2] = nlinks[b2] + 1 -- Then b2 is gaining a link to bn because of the merge
 				if nlinks[b2] == 9 then
 					lowlevel[b2] = nil
 				end
 			end
 
-			if not lnkn[b2] or lnkn[b2].elev > bdata.elev then
+			if not lnkn[b2] or lnkn[b2].elev > bdata.elev then -- If the link b1-bn will become the new lowest link between b2 and bn, redirect the link to b2
 				lnkn[b2] = bdata
 				lnk2[bn] = bdata
 			end
 		end
 	end
 
+	--------------------------------------------------------------
+	-- STEP 4: Orient basin graph, and grid nodes inside basins --
+	--------------------------------------------------------------
+	-- We will finally solve those freaking singular nodes.
+	-- To orient the basin graph, we will consider that the ultimate basin water should flow into is the map outside (basin #0). We will start from it and recursively walk upstream to the neighbouring basins, using only links that are in the minimal spanning tree. This gives the flow direction of the links, and thus, the outlet of every basin.
+	-- This will also give lake elevation, which is the highest link encountered between map outside and the given basin on the spanning tree.
+	-- And within each basin, we need to modify flow directions to connect the singular node to the outlet.
 	local queue = {[0] = -math.huge}
 	local basin_lake = {}
 	for n=1, nbasins do
@@ -273,15 +309,17 @@ local function flow_routing(dem, dirs, lakes, method)
 	end
 	local reverse = {3, 4, 1, 2, [0]=0}
 	for n=1, nbasins do
-		local b1, elev1 = next(queue)
+		local b1, elev1 = next(queue) -- Pop from queue
 		queue[b1] = nil
 		basin_lake[b1] = elev1
+		-- Iterate through b1's neighbours (according to the spanning tree)
 		for b2, bound in pairs(basin_graph[b1]) do
 			-- Make b2 flow into b1
-			local i = bound.i
+			local i = bound.i -- Get the coordinate of the link (which is the basin's outlet)
-			local dir = bound.is_y and 3 or 4
+			local dir = bound.is_y and 3 or 4 -- And get the direction (S/E/N/W)
 			if basin_id[i] ~= b2 then
 				dir = dir - 2
+				-- Coordinate 'i' refers to the side of the link with the highest X/Y position. In case it is in the wrong basin, take the other side by decrementing by one row/column.
 				if bound.is_y then
 					i = i - X
 				else
@@ -291,8 +329,12 @@ local function flow_routing(dem, dirs, lakes, method)
 				dir = 0
 			end
 
+			-- Use the flow directions computed in STEP 2 to find the route from the outlet position to the singular node, and reverse this route to make the singular node flow into the outlet
+			-- This can make the river flow uphill, which may seem unnatural, but it can only happen below a lake (because outlet elevation defines lake surface elevation)
 			repeat
+				-- Assign i's direction to 'dir', and get i's former direction
 				dir, dirs[i] = dirs[i], dir
+				-- Move i by following its former flow direction (downstream)
 				if dir == 1 then
 					i = i + X
 				elseif dir == 2 then
@@ -302,26 +344,36 @@ local function flow_routing(dem, dirs, lakes, method)
 				elseif dir == 4 then
 					i = i - 1
 				end
+				-- Reverse the flow direction for the next node, which will flow into i
 				dir = reverse[dir]
-			until dir == 0
+			until dir == 0 -- Stop when reaching the singular node
-			-- Add b2 into the queue
+
+			-- Add basin b2 into the queue, and keep the highest link elevation, that will define the elevation of the lake in b2
 			queue[b2] = mmax(elev1, bound.elev)
+			-- Remove b1 from b2's neighbours to avoid coming back to b1
 			basin_graph[b2][b1] = nil
 		end
 		basin_graph[b1] = nil
 	end
 
+	-- Every node will be assigned the lake elevation of the basin it belongs to.
+	-- If lake elevation is lower than ground elevation, it simply means that there is no lake here.
 	for i=1, X*Y do
 		lakes[i] = basin_lake[basin_id[i]]
 	end
 
+	-- That's it!
 	return dirs, lakes
 end
 
+
 local function accumulate(dirs, waterq)
+	-- Calculates the river flow by determining the surface of the catchment area for every node
+	-- This means: how many nodes will give their water to that given node, directly or indirectly?
+	-- This is obtained by following rivers downstream and summing up the flow of every tributary, starting with a value of 1 at the sources.
+	-- This will give non-zero values for every node but only large values will be considered to be rivers.
 	waterq = waterq or {}
 	local X, Y = dirs.X, dirs.Y
-	--local tinsert = table.insert
 
 	local ndonors = {}
 	local waterq = {X=X, Y=Y}
@@ -330,7 +382,7 @@ local function accumulate(dirs, waterq)
 		waterq[i] = 1
 	end
 
-	--for i1, dir in ipairs(dirs) do
+	-- Calculate the number of direct donors
 	for i1=1, X*Y do
 		local i2
 		local dir = dirs[i1]
@@ -349,10 +401,12 @@ local function accumulate(dirs, waterq)
 	end
 
 	for i1=1, X*Y do
+		-- Find sources (nodes that have no donor)
 		if ndonors[i1] == 0 then
 			local i2 = i1
 			local dir = dirs[i2]
 			local w = waterq[i2]
+			-- Follow the water flow downstream: move 'i2' to the next node according to its flow direction
 			while dir > 0 do
 				if dir == 1 then
 					i2 = i2 + X
@@ -363,9 +417,12 @@ local function accumulate(dirs, waterq)
 				elseif dir == 4 then
 					i2 = i2 - 1
 				end
+				-- Increment the water quantity of i2
 				w = w + waterq[i2]
 				waterq[i2] = w
 
+				-- Stop on an unresolved confluence (node with >1 donors) and decrease the number of remaining donors
+				-- When the ndonors of a confluence has decreased to 1, it means that its water quantity has already been incremented by its tributaries, so it can be resolved like a standard river section. However, do not decrease ndonors to zero to avoid considering it as a source.
 				if ndonors[i2] > 1 then
 					ndonors[i2] = ndonors[i2] - 1
 					break

terrainlib_lua/twist.lua

@@ -1,4 +1,4 @@
--- bounds.lua
+-- twist.lua
 
 local function get_bounds(dirs, rivers)
 	local X, Y = dirs.X, dirs.Y