mirror of
https://github.com/mt-mods/pipeworks.git
synced 2024-12-24 18:00:22 +01:00
28328d975c
1) Refactor autoplace,
There was a lot of redundant code and like a dozen unneccessary string
scans for every node next to every tube placed! I put it all into
indexed tables and loops instead of bizarre and unexplainable variable
names and copy and pasted code. There was also no support for notifying
a chest when an item has been taken from it by a filter, so I added
something for that.
I also thought it prudent to fall back on the
allow_metadata_inventory_take function should a special can_remove not
exist. In fact if can_insert doesn't exist, it calls
allow_metadata_inventory_put instead.
I also added a thing for allowing pipes to attach to nodes of other
modules, without having to hard code type all those node names into
autoplace.lua. Basically node.tube.collects(i,param2) and i is the
direction from the pipe and param2 is the param2 of what it's pointing
at.
I also abstracted the inscrutable correlation between i and
param2 by trial and error (and the paramwand mod) into understandable
functions. There was no pipeworks namespace so I created it, and put
these functions into pipeworks.collects (as distinguished from a
node.tube.collects function, which uses those functions)
And now it's too late to cart my old clothes to the thrift store,
dangit.
2) My "node.tube.collects" idea might be redundant with the
node.tube.connect_sides thing, though possibly more versatile so I'll
leave it in.
3) I was using node.tube.connects and fancy functions for checking if it's
the sides or top or whatnot, and this connect_side thing came in. This
should make both my way and the way using connect_side work.
Also removed some debugging cruft
520 lines
16 KiB
Lua
520 lines
16 KiB
Lua
--define the functions from https://github.com/minetest/minetest/pull/834 while waiting for the devs to notice it
|
|
local function dir_to_facedir(dir, is6d)
|
|
--account for y if requested
|
|
if is6d and math.abs(dir.y) > math.abs(dir.x) and math.abs(dir.y) > math.abs(dir.z) then
|
|
|
|
--from above
|
|
if dir.y < 0 then
|
|
if math.abs(dir.x) > math.abs(dir.z) then
|
|
if dir.x < 0 then
|
|
return 19
|
|
else
|
|
return 13
|
|
end
|
|
else
|
|
if dir.z < 0 then
|
|
return 10
|
|
else
|
|
return 4
|
|
end
|
|
end
|
|
|
|
--from below
|
|
else
|
|
if math.abs(dir.x) > math.abs(dir.z) then
|
|
if dir.x < 0 then
|
|
return 15
|
|
else
|
|
return 17
|
|
end
|
|
else
|
|
if dir.z < 0 then
|
|
return 6
|
|
else
|
|
return 8
|
|
end
|
|
end
|
|
end
|
|
|
|
--otherwise, place horizontally
|
|
elseif math.abs(dir.x) > math.abs(dir.z) then
|
|
if dir.x < 0 then
|
|
return 3
|
|
else
|
|
return 1
|
|
end
|
|
else
|
|
if dir.z < 0 then
|
|
return 2
|
|
else
|
|
return 0
|
|
end
|
|
end
|
|
end
|
|
|
|
local function facedir_to_dir(facedir)
|
|
--a table of possible dirs
|
|
return ({{x=0, y=0, z=1},
|
|
{x=1, y=0, z=0},
|
|
{x=0, y=0, z=-1},
|
|
{x=-1, y=0, z=0},
|
|
{x=0, y=-1, z=0},
|
|
{x=0, y=1, z=0}})
|
|
|
|
--indexed into by a table of correlating facedirs
|
|
[({[0]=1, 2, 3, 4,
|
|
5, 2, 6, 4,
|
|
6, 2, 5, 4,
|
|
1, 5, 3, 6,
|
|
1, 6, 3, 5,
|
|
1, 4, 3, 2})
|
|
|
|
--indexed into by the facedir in question
|
|
[facedir]]
|
|
end
|
|
|
|
-- autorouting for pipes
|
|
|
|
function pipe_scanforobjects(pos)
|
|
pipe_autoroute({ x=pos.x-1, y=pos.y , z=pos.z }, "_loaded")
|
|
pipe_autoroute({ x=pos.x+1, y=pos.y , z=pos.z }, "_loaded")
|
|
pipe_autoroute({ x=pos.x , y=pos.y-1, z=pos.z }, "_loaded")
|
|
pipe_autoroute({ x=pos.x , y=pos.y+1, z=pos.z }, "_loaded")
|
|
pipe_autoroute({ x=pos.x , y=pos.y , z=pos.z-1 }, "_loaded")
|
|
pipe_autoroute({ x=pos.x , y=pos.y , z=pos.z+1 }, "_loaded")
|
|
pipe_autoroute(pos, "_loaded")
|
|
|
|
pipe_autoroute({ x=pos.x-1, y=pos.y , z=pos.z }, "_empty")
|
|
pipe_autoroute({ x=pos.x+1, y=pos.y , z=pos.z }, "_empty")
|
|
pipe_autoroute({ x=pos.x , y=pos.y-1, z=pos.z }, "_empty")
|
|
pipe_autoroute({ x=pos.x , y=pos.y+1, z=pos.z }, "_empty")
|
|
pipe_autoroute({ x=pos.x , y=pos.y , z=pos.z-1 }, "_empty")
|
|
pipe_autoroute({ x=pos.x , y=pos.y , z=pos.z+1 }, "_empty")
|
|
pipe_autoroute(pos, "_empty")
|
|
end
|
|
|
|
function pipe_autoroute(pos, state)
|
|
nctr = minetest.get_node(pos)
|
|
if (string.find(nctr.name, "pipeworks:pipe_") == nil) then return end
|
|
|
|
pipes_scansurroundings(pos)
|
|
|
|
nsurround = pxm..pxp..pym..pyp..pzm..pzp
|
|
if nsurround == "000000" then nsurround = "110000" end
|
|
minetest.add_node(pos, { name = "pipeworks:pipe_"..nsurround..state })
|
|
end
|
|
|
|
-- autorouting for pneumatic tubes
|
|
|
|
function tube_scanforobjects(pos)
|
|
if pos == nil then return end
|
|
tube_autoroute({ x=pos.x-1, y=pos.y , z=pos.z })
|
|
tube_autoroute({ x=pos.x+1, y=pos.y , z=pos.z })
|
|
tube_autoroute({ x=pos.x , y=pos.y-1, z=pos.z })
|
|
tube_autoroute({ x=pos.x , y=pos.y+1, z=pos.z })
|
|
tube_autoroute({ x=pos.x , y=pos.y , z=pos.z-1 })
|
|
tube_autoroute({ x=pos.x , y=pos.y , z=pos.z+1 })
|
|
tube_autoroute(pos)
|
|
end
|
|
|
|
function in_table(table,element)
|
|
for _,el in ipairs(table) do
|
|
if el==element then return true end
|
|
end
|
|
return false
|
|
end
|
|
|
|
function is_tube(nodename)
|
|
return in_table(tubenodes,nodename)
|
|
end
|
|
|
|
if pipeworks == nil then
|
|
pipeworks = {}
|
|
end
|
|
|
|
-- this was tested experimentally, because I can't the whole bit arithematic
|
|
|
|
-- with these facingRight means "We're facing the right side of whatever it is"
|
|
pipeworks.connects = {
|
|
-- a filter's output is on the right, input on the left
|
|
facingLeft = function (i,param2)
|
|
-- measured with a mese filter
|
|
if i == 1 then
|
|
return param2 == 2 or param2 == 6 or param2 == 10 or param2 == 20
|
|
elseif i == 2 then
|
|
return param2 == 0 or param2 == 4 or param2 == 8 or param2 == 22
|
|
elseif i == 3 then
|
|
return param2 == 7 or param2 == 9 or param2 == 12 or param2 == 18
|
|
elseif i == 4 then
|
|
return param2 == 5 or param2 == 11 or param2 == 14 or param2 == 16
|
|
elseif i == 5 then
|
|
return param2 == 1 or param2 == 13 or param2 == 17 or param2 == 21
|
|
elseif i == 6 then
|
|
return param2 == 3 or param2 == 15 or param2 == 19
|
|
end
|
|
end,
|
|
facingRight = function (i,param2)
|
|
-- measured with a mese filter
|
|
if i == 1 then
|
|
return param2 == 0 or param2 == 4 or param2 == 8 or param2 == 22
|
|
elseif i == 2 then
|
|
return param2 == 2 or param2 == 6 or param2 == 10 or param2 == 20
|
|
elseif i == 3 then
|
|
return param2 == 5 or param2 == 11 or param2 == 14 or param2 == 16
|
|
elseif i == 4 then
|
|
return param2 == 7 or param2 == 9 or param2 == 12 or param2 == 18
|
|
elseif i == 5 then
|
|
return param2 == 3 or param2 == 15 or param2 == 19
|
|
elseif i == 6 then
|
|
return param2 == 1 or param2 == 13 or param2 == 17 or param2 == 21
|
|
end
|
|
end,
|
|
facingFront = function (i,param2)
|
|
-- measured with a chest and a technic:nodebreaker
|
|
if i == 1 then
|
|
return param2 == 3 or param2 == 7 or param2 == 11 or param2 == 21
|
|
elseif i == 2 then
|
|
return param2 == 1 or param2 == 5 or param2 == 9
|
|
elseif i == 3 then
|
|
return param2 == 4 or param2 == 10 or param2 == 14 or param2 == 19
|
|
elseif i == 4 then
|
|
return param2 == 6 or param2 == 8 or param2 == 15 or param2 == 17
|
|
elseif i == 5 then
|
|
return param2 == 14 or param2 == 18 or param2 == 22 or param2 == 2
|
|
elseif i == 6 then
|
|
return param2 == 12 or param2 == 16 or param2 == 20 or param2 == 0
|
|
end
|
|
end,
|
|
facingSide = function (i,param2)
|
|
-- aka not top or bottom
|
|
-- measured with a chair
|
|
if i == 1 or i == 2 then
|
|
return not (param2 >= 12 and param2 <= 19)
|
|
elseif i == 3 or i == 4 then
|
|
return not ((param2 >= 0 and param2 < 4) or (param2 >= 20 and param2 <= 22))
|
|
elseif i == 5 or i == 6 then
|
|
return not (param2 >= 4 and param2 <= 11)
|
|
end
|
|
end,
|
|
facingTop = function(i,param2)
|
|
-- measured with a chair
|
|
if i == 1 then
|
|
return param2 >= 16 and param2 <= 20
|
|
elseif i == 2 then
|
|
return param2 >= 12 and param2 < 16
|
|
elseif i == 3 then
|
|
return param2 >= 0 and param2 < 4
|
|
elseif i == 4 then
|
|
return param2 >= 21 and param2 < 23
|
|
elseif i == 5 then
|
|
return param2 >= 4 and param2 < 8
|
|
elseif i == 6 then
|
|
return param2 >= 8 and param2 < 12
|
|
-- else error bad value for i
|
|
end
|
|
end
|
|
}
|
|
|
|
--a function for determining which side of the node we are on
|
|
local function nodeside(node, tubedir)
|
|
--get a vector pointing back
|
|
local backdir = facedir_to_dir(node.param2)
|
|
|
|
--check whether the vector is equivalent to the tube direction; if it is, the tube's on the backside
|
|
if backdir.x == tubedir.x and backdir.y == tubedir.y and backdir.z == tubedir.z then
|
|
return "back"
|
|
end
|
|
|
|
--check whether the vector is antiparallel with the tube direction; that indicates the front
|
|
if backdir.x == -tubedir.x and backdir.y == -tubedir.y and backdir.z == -tubedir.z then
|
|
return "front"
|
|
end
|
|
|
|
--facedir is defined in terms of the top-bottom axis of the node; we'll take advantage of that
|
|
local topdir = ({[0]={x=0, y=1, z=0},
|
|
{x=0, y=0, z=1},
|
|
{x=0, y=0, z=-1},
|
|
{x=1, y=0, z=0},
|
|
{x=-1, y=0, z=0},
|
|
{x=0, y=-1, z=0}})[math.floor(node.param2/4)]
|
|
|
|
--is this the top?
|
|
if topdir.x == tubedir.x and topdir.y == tubedir.y and topdir.z == tubedir.z then
|
|
return "top"
|
|
end
|
|
|
|
--or the bottom?
|
|
if topdir.x == -tubedir.x and topdir.y == -tubedir.y and topdir.z == -tubedir.z then
|
|
return "bottom"
|
|
end
|
|
|
|
--we shall apply some maths to obtain the right-facing vector
|
|
local rightdir = {x=topdir.y*backdir.z - backdir.y*topdir.z,
|
|
y=topdir.z*backdir.x - backdir.z*topdir.x,
|
|
z=topdir.x*backdir.y - backdir.x*topdir.y}
|
|
|
|
--is this the right side?
|
|
if rightdir.x == tubedir.x and rightdir.y == tubedir.y and rightdir.z == tubedir.z then
|
|
return "right"
|
|
end
|
|
|
|
--or the left?
|
|
if rightdir.x == -tubedir.x and rightdir.y == -tubedir.y and rightdir.z == -tubedir.z then
|
|
return "left"
|
|
end
|
|
|
|
--we should be done by now; initiate panic mode
|
|
minetest.log("error", "nodeside has been confused by its parameters; see pipeworks autoplace.lua, line 382")
|
|
end
|
|
|
|
function tube_autoroute(pos)
|
|
local active = {0, 0, 0, 0, 0, 0}
|
|
local nctr = minetest.get_node(pos)
|
|
if not is_tube(nctr.name) then return end
|
|
|
|
local adjustments = {
|
|
{ x=-1, y=0, z=0 },
|
|
{ x=1, y=0, z=0 },
|
|
{ x=0, y=-1, z=0 },
|
|
{ x=0, y=1, z=0 },
|
|
{ x=0, y=0, z=-1 },
|
|
{ x=0, y=0, z=1 }
|
|
}
|
|
-- xm = 1, xp = 2, ym = 3, yp = 4, zm = 5, zp = 6
|
|
|
|
local positions = {}
|
|
local nodes = {}
|
|
for i,adj in ipairs(adjustments) do
|
|
positions[i] = {x=pos.x+adj.x, y=pos.y+adj.y, z=pos.z+adj.z}
|
|
nodes[i] = minetest.get_node(positions[i])
|
|
end
|
|
|
|
for i,node in ipairs(nodes) do
|
|
local idef = minetest.registered_nodes[node.name]
|
|
-- handle the tubes themselves
|
|
if is_tube(node.name) then
|
|
active[i] = 1
|
|
-- handle new style connectors
|
|
elseif idef.tube and idef.tube.connects then
|
|
-- connects returns true if self can connect w/ neighboring position
|
|
-- it uses facesFront, facesTop etc to determine this
|
|
-- pipeworks.connects.facingFront...
|
|
if idef.tube.connects(i,param2) then active[i] = 1 end
|
|
-- oops, handle the *other* newstyle connectors
|
|
elseif idef.tube and idef.tube.connect_side then
|
|
local dir = adjustments[i]
|
|
if idef.connect_sides[nodeside(node, {x=-dir.x, y=-dir.y, z=-dir.z})] then active[i] = 1 end
|
|
|
|
-- legacy stuff follows
|
|
elseif string.find(node.name, "pipeworks:filter") ~= nil or string.find(node.name, "pipeworks:mese_filter") ~= nil then
|
|
-- filters only connect to pipes on their output (despite appearances)
|
|
-- input has to be a chest or furnace or something
|
|
if pipeworks.connects.facingRight(i,node.param2)
|
|
then
|
|
active[i] = 1
|
|
end
|
|
elseif
|
|
-- not the front
|
|
string.find(node.name, "pipeworks:deployer_") ~= nil or
|
|
string.find(node.name, "pipeworks:nodebreaker_") ~= nil or
|
|
string.find(node.name, "technic:nodebreaker_") ~= nil
|
|
then
|
|
if not pipeworks.connects.facingFront(i,node.param2) then active[i] = 1 end
|
|
elseif
|
|
string.find(node.name, "default:furnace") ~= nil or
|
|
string.find(node.name, "default:chest") or
|
|
string.find(node.name, "default:chest_locked")
|
|
then
|
|
if not pipeworks.connects.facingFront(i,node.param2) or
|
|
pipeworks.connects.facingTop(i,node.param2) then active[i] = 1 end
|
|
elseif string.find(node.name, "pipeworks:autocrafter") ~= nil then
|
|
active[i] = 1
|
|
end
|
|
end
|
|
|
|
-- all sides checked, now figure which tube to use.
|
|
|
|
nsurround = ""
|
|
for i,n in ipairs(active) do
|
|
nsurround = nsurround .. n
|
|
end
|
|
local newname=string.sub(nctr.name,1,-7)..nsurround
|
|
if newname == nctr.name then return end
|
|
local meta=minetest.get_meta(pos)
|
|
local meta0=meta:to_table() -- XXX: hacky_swap_node
|
|
nctr.name = newname
|
|
minetest.add_node(pos, nctr)
|
|
local meta=minetest.get_meta(pos)
|
|
meta:from_table(meta0)
|
|
local nctr = minetest.get_node(pos)
|
|
end
|
|
|
|
-- auto-rotation code for various devices the tubes attach to
|
|
|
|
function pipes_scansurroundings(pos)
|
|
pxm=0
|
|
pxp=0
|
|
pym=0
|
|
pyp=0
|
|
pzm=0
|
|
pzp=0
|
|
|
|
nxm = minetest.get_node({ x=pos.x-1, y=pos.y , z=pos.z })
|
|
nxp = minetest.get_node({ x=pos.x+1, y=pos.y , z=pos.z })
|
|
nym = minetest.get_node({ x=pos.x , y=pos.y-1, z=pos.z })
|
|
nyp = minetest.get_node({ x=pos.x , y=pos.y+1, z=pos.z })
|
|
nzm = minetest.get_node({ x=pos.x , y=pos.y , z=pos.z-1 })
|
|
nzp = minetest.get_node({ x=pos.x , y=pos.y , z=pos.z+1 })
|
|
|
|
if (string.find(nxm.name, "pipeworks:pipe_") ~= nil) then pxm=1 end
|
|
if (string.find(nxp.name, "pipeworks:pipe_") ~= nil) then pxp=1 end
|
|
if (string.find(nym.name, "pipeworks:pipe_") ~= nil) then pym=1 end
|
|
if (string.find(nyp.name, "pipeworks:pipe_") ~= nil) then pyp=1 end
|
|
if (string.find(nzm.name, "pipeworks:pipe_") ~= nil) then pzm=1 end
|
|
if (string.find(nzp.name, "pipeworks:pipe_") ~= nil) then pzp=1 end
|
|
|
|
-- Special handling for valves...
|
|
|
|
if (string.find(nxm.name, "pipeworks:valve") ~= nil)
|
|
and (nxm.param2 == 0 or nxm.param2 == 2) then
|
|
pxm=1
|
|
end
|
|
|
|
if (string.find(nxp.name, "pipeworks:valve") ~= nil)
|
|
and (nxp.param2 == 0 or nxp.param2 == 2) then
|
|
pxp=1
|
|
end
|
|
|
|
if (string.find(nzm.name, "pipeworks:valve") ~= nil)
|
|
and (nzm.param2 == 1 or nzm.param2 == 3) then
|
|
pzm=1
|
|
end
|
|
|
|
if (string.find(nzp.name, "pipeworks:valve") ~= nil)
|
|
and (nzp.param2 == 1 or nzp.param2 == 3) then
|
|
pzp=1
|
|
end
|
|
|
|
-- ...flow sensors...
|
|
|
|
if (string.find(nxm.name, "pipeworks:flow_sensor") ~= nil)
|
|
and (nxm.param2 == 0 or nxm.param2 == 2) then
|
|
pxm=1
|
|
end
|
|
|
|
if (string.find(nxp.name, "pipeworks:flow_sensor") ~= nil)
|
|
and (nxp.param2 == 0 or nxp.param2 == 2) then
|
|
pxp=1
|
|
end
|
|
|
|
if (string.find(nzm.name, "pipeworks:flow_sensor") ~= nil)
|
|
and (nzm.param2 == 1 or nzm.param2 == 3) then
|
|
pzm=1
|
|
end
|
|
|
|
if (string.find(nzp.name, "pipeworks:flow_sensor") ~= nil)
|
|
and (nzp.param2 == 1 or nzp.param2 == 3) then
|
|
pzp=1
|
|
end
|
|
|
|
-- ...spigots...
|
|
|
|
if (string.find(nxm.name, "pipeworks:spigot") ~= nil)
|
|
and nxm.param2 == 1 then
|
|
pxm=1
|
|
end
|
|
|
|
if (string.find(nxp.name, "pipeworks:spigot") ~= nil)
|
|
and nxp.param2 == 3 then
|
|
pxp=1
|
|
end
|
|
|
|
if (string.find(nzm.name, "pipeworks:spigot") ~= nil)
|
|
and nzm.param2 == 0 then
|
|
pzm=1
|
|
end
|
|
|
|
if (string.find(nzp.name, "pipeworks:spigot") ~= nil)
|
|
and nzp.param2 == 2 then
|
|
pzp=1
|
|
end
|
|
|
|
-- ...sealed pipe entry/exit...
|
|
|
|
if (string.find(nxm.name, "pipeworks:entry_panel") ~= nil)
|
|
and (nxm.param2 == 1 or nxm.param2 == 3) then
|
|
pxm=1
|
|
end
|
|
|
|
if (string.find(nxp.name, "pipeworks:entry_panel") ~= nil)
|
|
and (nxp.param2 == 1 or nxp.param2 == 3) then
|
|
pxp=1
|
|
end
|
|
|
|
if (string.find(nzm.name, "pipeworks:entry_panel") ~= nil)
|
|
and (nzm.param2 == 0 or nzm.param2 == 2) then
|
|
pzm=1
|
|
end
|
|
|
|
if (string.find(nzp.name, "pipeworks:entry_panel") ~= nil)
|
|
and (nzp.param2 == 0 or nzp.param2 == 2) then
|
|
pzp=1
|
|
end
|
|
|
|
if (string.find(nym.name, "pipeworks:entry_panel") ~= nil)
|
|
and nym.param2 == 13 then
|
|
pym=1
|
|
end
|
|
|
|
if (string.find(nyp.name, "pipeworks:entry_panel") ~= nil)
|
|
and nyp.param2 == 13 then
|
|
pyp=1
|
|
end
|
|
|
|
|
|
-- ...pumps, grates...
|
|
|
|
if (string.find(nym.name, "pipeworks:grating") ~= nil) or
|
|
(string.find(nym.name, "pipeworks:pump") ~= nil) then
|
|
pym=1
|
|
end
|
|
|
|
-- ... and storage tanks.
|
|
|
|
if (string.find(nym.name, "pipeworks:storage_tank_") ~= nil) then
|
|
pym=1
|
|
end
|
|
|
|
if (string.find(nyp.name, "pipeworks:storage_tank_") ~= nil) then
|
|
pyp=1
|
|
end
|
|
|
|
-- ...extra devices specified via the function's parameters
|
|
-- ...except that this part is not implemented yet
|
|
--
|
|
-- xxx = nxm, nxp, nym, nyp, nzm, or nzp depending on the direction to check
|
|
-- yyy = pxm, pxp, pym, pyp, pzm, or pzp accordingly.
|
|
--
|
|
-- if string.find(xxx.name, "modname:nodename") ~= nil then
|
|
-- yyy = 1
|
|
-- end
|
|
--
|
|
-- for example:
|
|
--
|
|
-- if string.find(nym.name, "aero:outlet") ~= nil then
|
|
-- pym = 1
|
|
-- end
|
|
--
|
|
|
|
end
|
|
|
|
function pipe_look_for_stackable_tanks(pos)
|
|
local tym = minetest.get_node({ x=pos.x , y=pos.y-1, z=pos.z })
|
|
|
|
if string.find(tym.name, "pipeworks:storage_tank_") ~= nil or
|
|
string.find(tym.name, "pipeworks:expansion_tank_") ~= nil then
|
|
minetest.add_node(pos, { name = "pipeworks:expansion_tank_0", param2 = tym.param2})
|
|
end
|
|
end
|
|
|