Merge remote-tracking branch 'upstream/master'

Sends the same events from tubelib interaction as would be sent from pipeworks

 * Moved the tube_can_insert and tube_insert_object callbacks out of the node definition so they can be re-used in the tubelib registration
 * Optionally required tubelib and registered callbacks for pushing and pulling
 * Used "speculative pull" variable to only send a "take" event if tubelib's unpull is not called after a pull - this happens when it tries to take an item but there is no room, so it fails

.github/workflows/build.yml

@@ -0,0 +1,11 @@
+on: [push, pull_request]
+name: build
+jobs:
+  lint:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@master
+      - name: lint
+        uses: Roang-zero1/factorio-mod-luacheck@master
+        with:
+          luacheckrc_url: ""

.luacheckrc

@@ -7,8 +7,11 @@ read_globals = {
 	"pipeworks",
 	"dump",
 	"VoxelArea",
+	"ItemStack",
 }
 
 globals = {
 	"digilines",
+	"tubelib",
+	"tubelib2"
 }

README.inventory

@@ -54,6 +54,9 @@ overflow <itemstack> <count>
 Tricky situation:
 if you have a blank spot and put say 82 torches down your pipeline, followed by 99 coal, the 82 torches will go in the chest, and the chest will see that 1 more torch can fit since that would only go to 83. Since 1 more torch can fit, no "full" message will fire off. Then when the coal hits the chest, the "fail" message will fire and the coal will bounce out. The chest couldn't predict that coal would be coming next, so it couldn't know that the chest is full, for coal, while not full for torches.
 
+The inventory is also compatible with [`tubelib`](https://github.com/joe7575/techpack/tree/master/tubelib), which generally works in the same way as [`pipeworks`](https://gitlab.com/VanessaE/pipeworks) but transfers happen immediately and do not "bounce". This means that the messages should be identical to the messages sent by [`pipeworks`](https://gitlab.com/VanessaE/pipeworks), except that items will not send the "lost" message when they cannot fit.
+One oddity is that "take" messages will be asynchronous because, if an item does not fit in the chest, the event will need to be canceled. This means that it is possible (though highly unlikely) to recieve a "put" message into a slot which you have not yet recieved a "take" message for, there will not actually be two stacks in the same slot, though it may briefly appear that way until the "take" message is recieved.
+
 TODO: 
     - make chest.lua a mixin that gets both default and locked chests
     - digiline aware furnaces

README.md

@@ -1,7 +1,10 @@
 Digilines
 ==========
-- The minetest counterpart for bus systems like i2c, SPI, RS232, USB -
 
+[![Build status](https://github.com/minetest-mods/digilines/workflows/build/badge.svg)](https://github.com/minetest-mods/digilines/actions)
+
+- The minetest counterpart for bus systems like i2c, SPI, RS232, USB -
+- Minetest 5.0.0+ is required to use this mod.
 
 This mod adds digiline wires, an RTC (Real Time Clock), a light sensor as well as an LCD Screen.
 Can be used together with the luacontroller from mesecons. See the luacontroller manual for more information.

depends.txt

@@ -1 +0,0 @@
-default

description.txt

@@ -1 +0,0 @@
-This mod adds digiline wires, an RTC (Real Time Clock), a light sensor as well as an LCD Screen. Can be used together with the luacontroller from mesecons.

init.lua

@@ -1,5 +1,5 @@
-
 digilines = {}
+digilines.S = minetest.get_translator("digilines")
 
 -- Backwards compatibility code.
 -- We define a proxy table whose methods can be called with the

internal.lua

@@ -92,7 +92,7 @@ function digilines.transmit(pos, channel, msg, checked)
 		return
 	end
 	checked[checkedID] = true
-	
+
 	digilines.vm_begin()
 	local queue = queue_new()
 	queue_enqueue(queue, pos)
@@ -112,9 +112,9 @@ function digilines.transmit(pos, channel, msg, checked)
 				for _, rule in ipairs(rules) do
 					local nextPos = digilines.addPosRule(curPos, rule)
 					if digilines.rules_link(curPos, nextPos) then
-						local checkedID = minetest.hash_node_position(nextPos)
+						local checkedID2 = minetest.hash_node_position(nextPos)
-						if not checked[checkedID] then
+						if not checked[checkedID2] then
-							checked[checkedID] = true
+							checked[checkedID2] = true
 							queue_enqueue(queue, nextPos)
 						end
 					end

inventory.lua

@@ -1,3 +1,5 @@
+local S = digilines.S
+
 local pipeworks_enabled = minetest.get_modpath("pipeworks") ~= nil
 
 -- Sends a message onto the Digilines network.
@@ -51,9 +53,102 @@ local last_inventory_put_stack
 -- that should be removed once that’s fixed.
 local last_inventory_take_index
 
+local tube_can_insert = function(pos, _, stack, direction)
+	local ret = minetest.get_meta(pos):get_inventory():room_for_item("main", stack)
+	if not ret then
+		-- The stack cannot be accepted. It will never be passed to
+		-- insert_object, but it should be reported as a toverflow.
+		-- Here, direction = direction item is moving, which is into
+		-- side.
+		local side = vector.multiply(direction, -1)
+		send_message(pos, "toverflow", stack, nil, nil, side)
+	end
+	return ret
+end
+
+local tube_insert_object = function(pos, _, original_stack, direction)
+	-- Here, direction = direction item is moving, which is into side.
+	local side = vector.multiply(direction, -1)
+	local inv = minetest.get_meta(pos):get_inventory()
+	local inv_contents = inv:get_list("main")
+	local any_put = false
+	local stack = original_stack
+	local stack_name = stack:get_name()
+	local stack_count = stack:get_count()
+	-- Walk the inventory, adding items to existing stacks of the same
+	-- type.
+	for i = 1, #inv_contents do
+		local existing_stack = inv_contents[i]
+		if not existing_stack:is_empty() and existing_stack:get_name() == stack_name then
+			local leftover = existing_stack:add_item(stack)
+			local leftover_count = leftover:get_count()
+			if leftover_count ~= stack_count then
+				-- We put some items into the slot. Update the slot in
+				-- the inventory, tell Digilines listeners about it,
+				-- and keep looking for the a place to put the
+				-- leftovers if any.
+				any_put = true
+				inv:set_stack("main", i, existing_stack)
+				local stack_that_was_put
+				if leftover_count == 0 then
+					stack_that_was_put = stack
+				else
+					stack_that_was_put = ItemStack(stack)
+					stack_that_was_put:set_count(stack_count - leftover_count)
+				end
+				send_message(pos, "tput", stack_that_was_put, nil, i, side)
+				stack = leftover
+				stack_count = leftover_count
+				if stack_count == 0 then
+					break
+				end
+			end
+		end
+	end
+	if stack_count ~= 0 then
+		-- Walk the inventory, adding items to empty slots.
+		for i = 1, #inv_contents do
+			local existing_stack = inv_contents[i]
+			if existing_stack:is_empty() then
+				local leftover = existing_stack:add_item(stack)
+				local leftover_count = leftover:get_count()
+				if leftover_count ~= stack_count then
+					-- We put some items into the slot. Update the slot in
+					-- the inventory, tell Digilines listeners about it,
+					-- and keep looking for the a place to put the
+					-- leftovers if any.
+					any_put = true
+					inv:set_stack("main", i, existing_stack)
+					local stack_that_was_put
+					if leftover_count == 0 then
+						stack_that_was_put = stack
+					else
+						stack_that_was_put = ItemStack(stack)
+						stack_that_was_put:set_count(stack_count - leftover_count)
+					end
+					send_message(pos, "tput", stack_that_was_put, nil, i, side)
+					stack = leftover
+					stack_count = leftover_count
+					if stack_count == 0 then
+						break
+					end
+				end
+			end
+		end
+	end
+	if any_put then
+		check_full(pos, original_stack)
+	end
+	if stack_count ~= 0 then
+		-- Some items could not be added and bounced back. Report them.
+		send_message(pos, "toverflow", stack, nil, nil, side)
+	end
+	return stack
+end
+
 minetest.register_alias("digilines_inventory:chest", "digilines:chest")
 minetest.register_node("digilines:chest", {
-	description = "Digiline Chest",
+	description = S("Digiline Chest"),
 	tiles = {
 		"default_chest_top.png"..tubeconn,
 		"default_chest_top.png"..tubeconn,
@@ -68,14 +163,14 @@ minetest.register_node("digilines:chest", {
 	sounds = default.node_sound_wood_defaults(),
 	on_construct = function(pos)
 		local meta = minetest.get_meta(pos)
-		meta:set_string("infotext", "Digiline Chest")
+		meta:set_string("infotext", S("Digiline Chest"))
 		meta:set_string("formspec", "size[8,10]"..
 			((default and default.gui_bg) or "")..
 			((default and default.gui_bg_img) or "")..
 			((default and default.gui_slots) or "")..
-			"label[0,0;Digiline Chest]"..
+			"label[0,0;" .. S("Digiline Chest") .. "]" ..
 			"list[current_name;main;0,1;8,4;]"..
-			"field[2,5.5;5,1;channel;Channel;${channel}]"..
+			"field[2,5.5;5,1;channel;" .. S("Channel") .. ";${channel}]"..
 			((default and default.get_hotbar_bg) and default.get_hotbar_bg(0,6) or "")..
 			"list[current_player;main;0,6;8,4;]"..
 			"listring[]")
@@ -97,7 +192,7 @@ minetest.register_node("digilines:chest", {
 			minetest.get_meta(pos):set_string("channel",fields.channel)
 		end
 	end,
-	digiline = {
+	digilines = {
 		receptor = {},
 		effector = {
 			action = function() end
@@ -109,97 +204,8 @@ minetest.register_node("digilines:chest", {
 			return not pipeworks.connects.facingFront(i,param2)
 		end,
 		input_inventory = "main",
-		can_insert = function(pos, _, stack, direction)
+		can_insert = tube_can_insert,
-			local ret = minetest.get_meta(pos):get_inventory():room_for_item("main", stack)
+		insert_object = tube_insert_object,
-			if not ret then
-				-- The stack cannot be accepted. It will never be passed to
-				-- insert_object, but it should be reported as a toverflow.
-				-- Here, direction = direction item is moving, which is into
-				-- side.
-				local side = vector.multiply(direction, -1)
-				send_message(pos, "toverflow", stack, nil, nil, side)
-			end
-			return ret
-		end,
-		insert_object = function(pos, _, original_stack, direction)
-			-- Here, direction = direction item is moving, which is into side.
-			local side = vector.multiply(direction, -1)
-			local inv = minetest.get_meta(pos):get_inventory()
-			local inv_contents = inv:get_list("main")
-			local any_put = false
-			local stack = original_stack
-			local stack_name = stack:get_name()
-			local stack_count = stack:get_count()
-			-- Walk the inventory, adding items to existing stacks of the same
-			-- type.
-			for i = 1, #inv_contents do
-				local existing_stack = inv_contents[i]
-				if not existing_stack:is_empty() and existing_stack:get_name() == stack_name then
-					local leftover = existing_stack:add_item(stack)
-					local leftover_count = leftover:get_count()
-					if leftover_count ~= stack_count then
-						-- We put some items into the slot. Update the slot in
-						-- the inventory, tell Digilines listeners about it,
-						-- and keep looking for the a place to put the
-						-- leftovers if any.
-						any_put = true
-						inv:set_stack("main", i, existing_stack)
-						local stack_that_was_put
-						if leftover_count == 0 then
-							stack_that_was_put = stack
-						else
-							stack_that_was_put = ItemStack(stack)
-							stack_that_was_put:set_count(stack_count - leftover_count)
-						end
-						send_message(pos, "tput", stack_that_was_put, nil, i, side)
-						stack = leftover
-						stack_count = leftover_count
-						if stack_count == 0 then
-							break
-						end
-					end
-				end
-			end
-			if stack_count ~= 0 then
-				-- Walk the inventory, adding items to empty slots.
-				for i = 1, #inv_contents do
-					local existing_stack = inv_contents[i]
-					if existing_stack:is_empty() then
-						local leftover = existing_stack:add_item(stack)
-						local leftover_count = leftover:get_count()
-						if leftover_count ~= stack_count then
-							-- We put some items into the slot. Update the slot in
-							-- the inventory, tell Digilines listeners about it,
-							-- and keep looking for the a place to put the
-							-- leftovers if any.
-							any_put = true
-							inv:set_stack("main", i, existing_stack)
-							local stack_that_was_put
-							if leftover_count == 0 then
-								stack_that_was_put = stack
-							else
-								stack_that_was_put = ItemStack(stack)
-								stack_that_was_put:set_count(stack_count - leftover_count)
-							end
-							send_message(pos, "tput", stack_that_was_put, nil, i, side)
-							stack = leftover
-							stack_count = leftover_count
-							if stack_count == 0 then
-								break
-							end
-						end
-					end
-				end
-			end
-			if any_put then
-				check_full(pos, original_stack)
-			end
-			if stack_count ~= 0 then
-				-- Some items could not be added and bounced back. Report them.
-				send_message(pos, "toverflow", stack, nil, nil, side)
-			end
-			return stack
-		end,
 		remove_items = function(pos, _, stack, dir, count)
 			-- Here, stack is the ItemStack in our own inventory that is being
 			-- pulled from, NOT the stack that is actually pulled out.
@@ -229,7 +235,7 @@ minetest.register_node("digilines:chest", {
 		last_inventory_take_index = index
 		return stack:get_count()
 	end,
-	on_metadata_inventory_move = function(pos, from_list, from_index, to_list, to_index, count, player)
+	on_metadata_inventory_move = function(pos, _, from_index, _, to_index, count, player)
 		-- See what would happen if we were to move the items back from in the
 		-- opposite direction. In the event of a normal move, this must
 		-- succeed, because a normal move subtracts some items from the from
@@ -310,6 +316,96 @@ minetest.register_node("digilines:chest", {
 	end
 })
 
+if minetest.global_exists("tubelib") then
+	local speculative_pull = nil
+	local pull_succeeded = function(passed_speculative_pull)
+		if passed_speculative_pull.canceled then return end
+
+		send_message(passed_speculative_pull.pos, "ttake", passed_speculative_pull.taken,
+				passed_speculative_pull.index, nil, vector.multiply(passed_speculative_pull.dir, -1))
+		check_empty(passed_speculative_pull.pos)
+	end
+	local function tube_side(pos, side)
+		if side == "U" then return {x=0,y=-1,z=0}
+		elseif side == "D" then return {x=0,y=1,z=0}
+		end
+		local param2 = minetest.get_node(pos).param2
+		return vector.multiply(
+			minetest.facedir_to_dir(
+				tubelib2.side_to_dir(side, param2) - 1),
+			-1)
+	end
+	tubelib.register_node("digilines:chest", {}, {
+		on_pull_stack = function(pos, side, _)
+			local inv = minetest.get_meta(pos):get_inventory()
+			for i, stack in pairs(inv:get_list("main")) do
+				if not stack:is_empty() then
+					speculative_pull = {
+						canceled = false,
+						pos = pos,
+						taken = stack,
+						index = i,
+						dir = tube_side(pos, side)
+					}
+					minetest.after(0, pull_succeeded, speculative_pull)
+					inv:set_stack("main", i, nil)
+					return stack
+				end
+			end
+			return nil
+		end,
+		on_pull_item = function(pos, side, _)
+			local inv = minetest.get_meta(pos):get_inventory()
+			for i, stack in pairs(inv:get_list("main")) do
+				if not stack:is_empty() then
+					local taken = stack:take_item(1)
+					speculative_pull = {
+						canceled = false,
+						pos = pos,
+						taken = taken,
+						index = i,
+						dir = tube_side(pos, side)
+					}
+					minetest.after(0, pull_succeeded, speculative_pull)
+					inv:set_stack("main", i, stack)
+					return taken
+				end
+			end
+			return nil
+		end,
+		on_push_item = function(pos, side, item, _)
+			local dir_vec = tube_side(pos, side)
+			if not tube_can_insert(pos, nil, item, dir_vec) then
+				return false
+			end
+			tube_insert_object(pos, nil, item, dir_vec)
+			return true
+		end,
+		on_unpull_item = function(pos, _, item, _)
+			local inv = minetest.get_meta(pos):get_inventory()
+			if not inv:room_for_item("main", item) then
+				return false
+			end
+
+			local existing_stack = inv:get_stack("main", speculative_pull.index)
+			local leftover = existing_stack:add_item(item)
+			if not leftover:is_empty() then
+				return false
+			end
+
+			inv:set_stack("main", speculative_pull.index, existing_stack)
+
+			-- Cancel speculative pull
+			-- this on_unpull_item callback should be called
+			-- immediately after on_pull_item if it fails
+			-- so this should be procedural
+			speculative_pull.canceled = true
+			speculative_pull = nil
+			return true
+		end,
+	})
+end
+
 minetest.register_craft({
 	type = "shapeless",
 	output = "digilines:chest",

lcd.lua

@@ -1,3 +1,5 @@
+local S = digilines.S
+
 --* parts are currently not possible because you cannot set the pitch of an entity from lua
 
 -- Font: 04.jp.org
@@ -5,7 +7,6 @@
 -- load characters map
 local chars_file = io.open(minetest.get_modpath("digilines").."/characters", "r")
 local charmap = {}
-local max_chars = 12
 if not chars_file then
 	print("[digilines] E: LCD: character map file not found")
 else
@@ -21,7 +22,7 @@ else
 end
 
 -- CONSTANTS
-local LCD_WITH = 100
+local LCD_WIDTH = 100
 local LCD_PADDING = 8
 
 local LINE_LENGTH = 12
@@ -30,31 +31,95 @@ local NUMBER_OF_LINES = 5
 local LINE_HEIGHT = 14
 local CHAR_WIDTH = 5
 
+
+assert((CHAR_WIDTH+1) * LINE_LENGTH <= LCD_WIDTH - LCD_PADDING*2, "LCD: Lines set too long!")
+assert((LINE_HEIGHT+1) * NUMBER_OF_LINES <= LCD_WIDTH - LCD_PADDING*2, "LCD: Too many lines!")
+
+
+local split = function(s, pat)
+	-- adapted from https://stackoverflow.com/a/1647577/4067384
+	-- simplified for our only usecase
+	local st, g = 1, s:gmatch("()("..pat..")")
+	local function getter()
+		if st then
+			local segs, seps, sep = st, g()
+			st = sep and seps + #sep
+			return s:sub(segs, (seps or 0) - 1)
+		end
+	end
+	return getter
+end
+
 local create_lines = function(text)
+	--[[
+	  Typeset the lines according to these rules (in order of subjective significance):
+	  - words that fit on the screen but would let the current line overflow are placed on a new line instead
+	  - " | " always forces a linebreak
+	  - spaces are included, except when there is a linebreak anyway
+	  - words with more characters than fit on screen are just chopped up, filling the lines as full as possible
+	  - don't bother typesetting more lines than fit on screen
+	  - if we are on the last line that will fit on screen
+	]]--
 	local line = ""
 	local line_num = 1
 	local tab = {}
-	for word in string.gmatch(text, "%S+") do
+	local flush_line_and_check_for_return = function()
-		if string.len(line)+string.len(word) < LINE_LENGTH and word ~= "|" then
+		table.insert(tab, line)
-			if line ~= "" then
+		line_num = line_num+1
-				line = line.." "..word
+		if line_num > NUMBER_OF_LINES then
+			return true
+		end
+		line = ""
+	end
+	for par in split(text, " | ") do
+		for word in split(par, "%s") do
+			if string.len(word) <= LINE_LENGTH and line_num < NUMBER_OF_LINES then
+				local line_len = string.len(line)
+				if line_len > 0 then
+					-- remember the space
+					line_len = line_len + 1
+				end
+				if line_len + string.len(word) <= LINE_LENGTH then
+					if line_len > 0 then
+						line = line.." "..word
+					else
+						line = word
+					end
+				else
+					-- don't add the space since we have a line break
+					if word ~= " " then
+						if line_len > 0 then
+							-- ok, we need the new line
+							if flush_line_and_check_for_return() then return tab end
+						end
+						line = word
+					end
+				end
 			else
-				line = word
+				-- chop up word to make it fit
-			end
+				local remaining
-		else
+				while true do
-			table.insert(tab, line)
+					remaining = LINE_LENGTH - string.len(line)
-			if word ~= "|" then
+					if remaining < LINE_LENGTH then
-				line = word
+						line = line .. " "
-			else
+						remaining = remaining - 1
-				line = ""
+					end
-			end
+					if remaining < string.len(word) then
-			line_num = line_num+1
+						line = line .. string.sub(word, 1, remaining)
-			if line_num > NUMBER_OF_LINES then
+						word = string.sub(word, remaining+1)
-				return tab
+						if flush_line_and_check_for_return() then return tab end
+					else
+						-- used up the word
+						line = line .. word
+						break
+					end
+				end
 			end
 		end
+		-- end of paragraph
+		if flush_line_and_check_for_return() then return tab end
+		line = ""
 	end
-	table.insert(tab, line)
 	return tab
 end
 
@@ -63,7 +128,7 @@ local generate_line = function(s, ypos)
 	local parsed = {}
 	local width = 0
 	local chars = 0
-	while chars < max_chars and i <= #s do
+	while chars < LINE_LENGTH and i <= #s do
 		local file = nil
 		if charmap[s:sub(i, i)] ~= nil then
 			file = charmap[s:sub(i, i)]
@@ -73,10 +138,13 @@ local generate_line = function(s, ypos)
 			i = i + 2
 		else
 			print("[digilines] W: LCD: unknown symbol in '"..s.."' at "..i)
+			if charmap[" "] ~= nil then
+				file = charmap[" "]
+			end
 			i = i + 1
 		end
 		if file ~= nil then
-			width = width + CHAR_WIDTH
+			width = width + CHAR_WIDTH + 1
 			table.insert(parsed, file)
 			chars = chars + 1
 		end
@@ -84,7 +152,7 @@ local generate_line = function(s, ypos)
 	width = width - 1
 
 	local texture = ""
-	local xpos = math.floor((LCD_WITH - 2 * LCD_PADDING - width) / 2 + LCD_PADDING)
+	local xpos = math.floor((LCD_WIDTH - width) / 2)
 	for ii = 1, #parsed do
 		texture = texture..":"..xpos..","..ypos.."="..parsed[ii]..".png"
 		xpos = xpos + CHAR_WIDTH + 1
@@ -93,8 +161,8 @@ local generate_line = function(s, ypos)
 end
 
 local generate_texture = function(lines)
-	local texture = "[combine:"..LCD_WITH.."x"..LCD_WITH
+	local texture = "[combine:"..LCD_WIDTH.."x"..LCD_WIDTH
-	local ypos = 16
+	local ypos = math.floor((LCD_WIDTH - LINE_HEIGHT*NUMBER_OF_LINES) / 2)
 	for i = 1, #lines do
 		texture = texture..generate_line(lines[i], ypos)
 		ypos = ypos + LINE_HEIGHT
@@ -173,7 +241,7 @@ local prepare_writing = function(pos)
 	if entity then
 		set_texture(entity)
 		rotate_text(pos)
-	end	
+	end
 end
 
 local spawn_entity = function(pos)
@@ -204,7 +272,7 @@ local lcd_box = {
 minetest.register_alias("digilines_lcd:lcd", "digilines:lcd")
 minetest.register_node("digilines:lcd", {
 	drawtype = "nodebox",
-	description = "Digiline LCD",
+	description = S("Digiline LCD"),
 	inventory_image = "lcd_lcd.png",
 	wield_image = "lcd_lcd.png",
 	tiles = {"lcd_anyside.png"},
@@ -225,12 +293,12 @@ minetest.register_node("digilines:lcd", {
 	end,
 	on_construct = reset_meta,
 	on_destruct = clearscreen,
-	on_punch = function(pos, node, puncher, pointed_thing)
+	on_punch = function(pos, _, puncher, _)
 		if minetest.is_player(puncher) then
 			spawn_entity(pos)
 		end
 	end,
-	on_rotate = function(pos, node, user, mode, new_param2)
+	on_rotate = function(pos, _, _, mode, new_param2)
 		if mode ~= screwdriver.ROTATE_FACE then
 			return false
 		end
@@ -246,7 +314,7 @@ minetest.register_node("digilines:lcd", {
 			minetest.get_meta(pos):set_string("channel", fields.channel)
 		end
 	end,
-	digiline = {
+	digilines = {
 		receptor = {},
 		effector = {
 			action = on_digiline_receive
@@ -273,7 +341,10 @@ minetest.register_craft({
 	output = "digilines:lcd 2",
 	recipe = {
 		{"default:steel_ingot", "digilines:wire_std_00000000", "default:steel_ingot"},
-		{"mesecons_lightstone:lightstone_green_off","mesecons_lightstone:lightstone_green_off","mesecons_lightstone:lightstone_green_off"},
+		{"mesecons_lightstone:lightstone_green_off",
+		"mesecons_lightstone:lightstone_green_off",
+		"mesecons_lightstone:lightstone_green_off"},
+
 		{"default:glass","default:glass","default:glass"}
 	}
 })

lightsensor.lua

@@ -1,3 +1,5 @@
+local S = digilines.S
+
 local GET_COMMAND = "GET"
 
 local lsensor_nodebox =
@@ -31,7 +33,7 @@ end
 
 minetest.register_alias("digilines_lightsensor:lightsensor", "digilines:lightsensor")
 minetest.register_node("digilines:lightsensor", {
-	description = "Digiline Lightsensor",
+	description = S("Digiline Lightsensor"),
 	drawtype = "nodebox",
 	tiles = {"digilines_lightsensor.png"},
 
@@ -39,7 +41,7 @@ minetest.register_node("digilines:lightsensor", {
 	groups = {dig_immediate=2},
 	selection_box = lsensor_selbox,
 	node_box = lsensor_nodebox,
-	digiline =
+	digilines =
 	{
 		receptor = {},
 		effector = {
@@ -61,3 +63,11 @@ minetest.register_node("digilines:lightsensor", {
 		end
 	end,
 })
+
+minetest.register_craft({
+	output = "digilines:lightsensor",
+	recipe = {
+		{"default:glass","default:glass","default:glass"},
+		{"default:steel_ingot", "digilines:wire_std_00000000", "default:steel_ingot"},
+	}
+})

locale/digilines.zh_TW.tr

@@ -0,0 +1,17 @@
+# textdomain: digilines
+
+### inventory.lua ###
+Digiline Chest=訊纜儲物箱
+Channel=頻道
+
+### lcd.lua ###
+Digiline LCD=訊纜 LCD
+
+### lightsensor.lua ###
+Digiline Lightsensor=訊纜光感應器
+
+### rtc.lua ###
+Digiline Real Time Clock (RTC)=訊纜實時時鐘
+
+### wire_std.lua ###
+Digiline=訊纜

locale/template.txt

@@ -0,0 +1,17 @@
+# textdomain: digilines
+
+### inventory.lua ###
+Digiline Chest=
+Channel=
+
+### lcd.lua ###
+Digiline LCD=
+
+### lightsensor.lua ###
+Digiline Lightsensor=
+
+### rtc.lua ###
+Digiline Real Time Clock (RTC)=
+
+### wire_std.lua ###
+Digiline=

mod.conf

@@ -1 +1,7 @@
 name = digilines
+depends = default
+optional_depends = tubelib,tubelib2
+description = """
+This mod adds digiline wires, an RTC (Real Time Clock), a light sensor as well as an LCD Screen. 
+Can be used together with the luacontroller from mesecons.
+"""

rtc.lua

@@ -1,3 +1,5 @@
+local S = digilines.S
+
 local GET_COMMAND = "GET"
 
 local rtc_nodebox =
@@ -26,7 +28,7 @@ end
 
 minetest.register_alias("digilines_rtc:rtc", "digilines:rtc")
 minetest.register_node("digilines:rtc", {
-	description = "Digiline Real Time Clock (RTC)",
+	description = S("Digiline Real Time Clock (RTC)"),
 	drawtype = "nodebox",
 	tiles = {"digilines_rtc.png"},
 
@@ -35,7 +37,7 @@ minetest.register_node("digilines:rtc", {
 	groups = {dig_immediate=2},
 	selection_box = rtc_selbox,
 	node_box = rtc_nodebox,
-	digiline =
+	digilines =
 	{
 		receptor = {},
 		effector = {
@@ -57,3 +59,12 @@ minetest.register_node("digilines:rtc", {
 		end
 	end,
 })
+
+minetest.register_craft({
+	output = "digilines:rtc",
+	recipe = {
+		{"", "dye:black", ""},
+		{"default:steel_ingot", "default:mese_crystal_fragment", "default:steel_ingot"},
+		{"", "digilines:wire_std_00000000", ""}
+	}
+})

wire_std.lua

@@ -1,3 +1,5 @@
+local S = digilines.S
+
 -- naming scheme: wire:(xp)(zp)(xm)(zm)_on/off
 -- The conditions in brackets define whether there is a digiline at that place or not
 -- 1 = there is one; 0 = there is none
@@ -36,7 +38,7 @@ for zmy=0, 1 do
 
 	if nodeid == "00000000" then
 		groups = {dig_immediate = 3}
-		wiredesc = "Digiline"
+		wiredesc = S("Digiline")
 	else
 		groups = {dig_immediate = 3, not_in_creative_inventory = 1}
 	end
@@ -90,7 +92,7 @@ for zmy=0, 1 do
 		paramtype = "light",
 		paramtype2 = "facedir",
 		sunlight_propagates = true,
-		digiline =
+		digilines =
 		{
 			wire =
 			{

wires_common.lua

@@ -1,15 +1,12 @@
-minetest.register_on_placenode(function(pos, node)
-	if minetest.registered_nodes[node.name].digiline then
-		digilines.update_autoconnect(pos)
-	end
-end)
 
-minetest.register_on_dignode(function(pos, node)
+local function check_and_update(pos, node)
-	if minetest.registered_nodes[node.name] and minetest.registered_nodes[node.name].digiline then
+	if digilines.getspec(node) then
--- need to make sure that node exists (unknown nodes!)
 		digilines.update_autoconnect(pos)
 	end
-end)
+end
+
+minetest.register_on_placenode(check_and_update)
+minetest.register_on_dignode(check_and_update)
 
 function digilines.update_autoconnect(pos, secondcall)
 	local xppos = {x=pos.x+1, y=pos.y, z=pos.z}
@@ -42,8 +39,7 @@ function digilines.update_autoconnect(pos, secondcall)
 		digilines.update_autoconnect(zmympos, true)
 	end
 
-	local def = minetest.registered_nodes[minetest.get_node(pos).name]
+	local digilinespec = digilines.getspec(minetest.get_node(pos))
-	local digilinespec = def and def.digiline
 	if not (digilinespec and digilinespec.wire and
 			digilinespec.wire.use_autoconnect) then
 		return nil