Refactor actionqueue.lua (#501)

Reduce actionqueue complexity, thus faster execution
Improve code style
Add documentation/explanations
This commit is contained in:
DS 2020-01-06 21:59:02 +01:00 committed by SmallJoker
parent 9b58f8db29
commit 68c1729990

View File

@ -1,96 +1,140 @@
mesecon.queue.actions={} -- contains all ActionQueue actions
--[[
Mesecons uses something it calls an ActionQueue.
function mesecon.queue:add_function(name, func)
mesecon.queue.funcs[name] = func
The ActionQueue holds functions and actions.
Functions are added on load time with a specified name.
Actions are preserved over server restarts.
Each action consists of a position, the name of an added function to be called,
the params that should be used in this function call (additionally to the pos),
the time after which it should be executed, an optional overwritecheck and a
priority.
If time = 0, the action will be executed in the next globalstep, otherwise the
earliest globalstep when it will be executed is the after next globalstep.
It is guaranteed, that for two actions ac1, ac2 where ac1 ~= ac2,
ac1.time == ac2.time, ac1.priority == ac2.priority and ac1 was added earlier
than ac2, ac1 will be executed before ac2 (but in the same globalstep).
Note: Do not pass references in params, as they can not be preserved.
Also note: Some of the guarantees here might be dropped at some time.
]]
-- localize for speed
local queue = mesecon.queue
queue.actions = {} -- contains all ActionQueue actions
function queue:add_function(name, func)
queue.funcs[name] = func
end
-- If add_action with twice the same overwritecheck and same position are called, the first one is overwritten
-- use overwritecheck nil to never overwrite, but just add the event to the queue
-- priority specifies the order actions are executed within one globalstep, highest first
-- should be between 0 and 1
function mesecon.queue:add_action(pos, func, params, time, overwritecheck, priority)
function queue:add_action(pos, func, params, time, overwritecheck, priority)
-- Create Action Table:
time = time or 0 -- time <= 0 --> execute, time > 0 --> wait time until execution
priority = priority or 1
local action = { pos=mesecon.tablecopy(pos),
local action = {
pos = mesecon.tablecopy(pos),
func = func,
params = mesecon.tablecopy(params or {}),
time = time,
owcheck = (overwritecheck and mesecon.tablecopy(overwritecheck)) or nil,
priority=priority}
priority = priority
}
local toremove = nil
-- Otherwise, add the action to the queue
if overwritecheck then -- check if old action has to be overwritten / removed:
for i, ac in ipairs(mesecon.queue.actions) do
if(vector.equals(pos, ac.pos)
and mesecon.cmpAny(overwritecheck, ac.owcheck)) then
toremove = i
-- check if old action has to be overwritten / removed:
if overwritecheck then
for i, ac in ipairs(queue.actions) do
if vector.equals(pos, ac.pos)
and mesecon.cmpAny(overwritecheck, ac.owcheck) then
-- remove the old action
table.remove(queue.actions, i)
break
end
end
end
if (toremove ~= nil) then
table.remove(mesecon.queue.actions, toremove)
end
table.insert(mesecon.queue.actions, action)
table.insert(queue.actions, action)
end
-- execute the stored functions on a globalstep
-- if however, the pos of a function is not loaded (get_node_or_nil == nil), do NOT execute the function
-- this makes sure that resuming mesecons circuits when restarting minetest works fine
-- this makes sure that resuming mesecons circuits when restarting minetest works fine (hm, where do we do this?)
-- However, even that does not work in some cases, that's why we delay the time the globalsteps
-- start to be execute by 5 seconds
local get_highest_priority = function (actions)
local highestp = -1
local highesti
for i, ac in ipairs(actions) do
if ac.priority > highestp then
highestp = ac.priority
highesti = i
end
end
-- start to be execute by 4 seconds
return highesti
end
local m_time = 0
local resumetime = mesecon.setting("resumetime", 4)
minetest.register_globalstep(function (dtime)
m_time = m_time + dtime
-- don't even try if server has not been running for XY seconds; resumetime = time to wait
-- after starting the server before processing the ActionQueue, don't set this too low
if (m_time < resumetime) then return end
local actions = mesecon.tablecopy(mesecon.queue.actions)
local function globalstep_func(dtime)
local actions = queue.actions
-- split into two categories:
-- actions_now: actions to execute now
-- queue.actions: actions to execute later
local actions_now = {}
queue.actions = {}
mesecon.queue.actions = {}
-- sort actions into two categories:
-- those toexecute now (actions_now) and those to execute later (mesecon.queue.actions)
for i, ac in ipairs(actions) do
for _, ac in ipairs(actions) do
if ac.time > 0 then
ac.time = ac.time - dtime -- executed later
table.insert(mesecon.queue.actions, ac)
-- action ac is to be executed later
-- ~> insert into queue.actions
ac.time = ac.time - dtime
table.insert(queue.actions, ac)
else
-- action ac is to be executed now
-- ~> insert into actions_now
table.insert(actions_now, ac)
end
end
while(#actions_now > 0) do -- execute highest priorities first, until all are executed
local hp = get_highest_priority(actions_now)
mesecon.queue:execute(actions_now[hp])
table.remove(actions_now, hp)
-- stable-sort the executed actions after their priority
-- some constructions might depend on the execution order, hence we first
-- execute the actions that had a lower index in actions_now
local old_action_order = {}
for i, ac in ipairs(actions_now) do
old_action_order[ac] = i
end
table.sort(actions_now, function(ac1, ac2)
if ac1.priority ~= ac2.priority then
return ac1.priority > ac2.priority
else
return old_action_order[ac1] < old_action_order[ac2]
end
end)
function mesecon.queue:execute(action)
-- execute highest priorities first, until all are executed
for _, ac in ipairs(actions_now) do
queue:execute(ac)
end
end
-- delay the time the globalsteps start to be execute by 4 seconds
do
local m_time = 0
local resumetime = mesecon.setting("resumetime", 4)
local globalstep_func_index = #minetest.registered_globalsteps + 1
minetest.register_globalstep(function(dtime)
m_time = m_time + dtime
-- don't even try if server has not been running for XY seconds; resumetime = time to wait
-- after starting the server before processing the ActionQueue, don't set this too low
if m_time < resumetime then
return
end
-- replace this globalstep function
minetest.registered_globalsteps[globalstep_func_index] = globalstep_func
end)
end
function queue:execute(action)
-- ignore if action queue function name doesn't exist,
-- (e.g. in case the action queue savegame was written by an old mesecons version)
if mesecon.queue.funcs[action.func] then
mesecon.queue.funcs[action.func](action.pos, unpack(action.params))
if queue.funcs[action.func] then
queue.funcs[action.func](action.pos, unpack(action.params))
end
end
@ -98,8 +142,8 @@ end
-- Store and read the ActionQueue to / from a file
-- so that upcoming actions are remembered when the game
-- is restarted
mesecon.queue.actions = mesecon.file2table("mesecon_actionqueue")
queue.actions = mesecon.file2table("mesecon_actionqueue")
minetest.register_on_shutdown(function()
mesecon.table2file("mesecon_actionqueue", mesecon.queue.actions)
mesecon.table2file("mesecon_actionqueue", queue.actions)
end)