This keeps the filenames the same, but adds a new "inside" double texture
for the open chest.
Use regular drawtype for closed chest and delete the "cube.obj" model.
X-flip the right-side texture for the closed chest.
Revert the new 'default:game' inventory back to the old 'main' and use the
lbm to restore the contents of the chest.
Change the name of the conversion LBM to ensure it is run again on already
converted chests.
Adds a mesh model that appears when a chest is opened. The chest
stays visibly open as long as the player keeps it open. When the
player closes the formspec, the chest returns back to the closed
shape. While opening and closing, a sound plays.
A second person inspecting the chest will trigger a second sound
open. However, only after the last player closes the chest, does the
chest actually visually close and is the sound close played. This
keeps mesh updates to a minimum.
While it's possible that a server shutting down may cause chests
to remain open, this does not affect the chests' working matter,
and opening or closing them should fix them.
Old chests are converted to the new style by LBM. I previously
had them converted on open but this was unreliable, and LBMs
don't have that problem.
Open chests cannot be dug up. This prevents people from keeping
a chest open and digging it out as well, since closing a chest
would place a chest back (swap) at the spot. We could protect
against this, but it still messes up the client and causes a lot
of "missing node inventory" error messages otherwise. It's
unlikely but possible that a player lagging out causes a chest
to stay "open" and thus unremovable by digging, but there are
other ways of dealing with that - a server restart fixes that
issue.
If the lid of the chest is obstructed, the sounds continue to play,
but the lid isn't opened. Obstructed means that a node is present
above the chest lid, however, we ignore several node types like signs,
torches (not 3d) and wallmounted nodeboxes (typically signs) since
they don't pose any major obstruction in almost any case, and are
typically found above chests. Additionally, the selection box of the
opened chest does not include the lid, and so one can still interact
with e.g. a sign behind an open lid.
Due to the fact that chests now have 7+ textures, we can no longer
use materials (limit: 6) to texture the chest, and so there is now
a single UV mapped image that applies both to open and closed chests.
While this does mean texture pack makers need to create it, this
is extremely simple and consists of a simple cut'n'paste over the
template and should be really easy to do. Only one texture file is
now then used for both open and closed chests.
Previously i had matched ore density to moreores, but this density was
too high and out of balance with MTGame, reduce density to be similar
to copper ore.
The 2 levels of underground ore were overlapping, fix.
Textures are actually by kilbith, update credits.
Also credit kilbith for bronze, copper, gold and steel blocks, credits
had not been updated at the time.
Use Calinou's textures from moreores mod.
Craft bronze from tin and copper instead of steel and copper.
Match ore density to the moreores mod but start ore at a depth of
y = -32 to be part of the depth progression of other ores.
Allow skeleton keys to be stacked by converting them to craftitems and
adding a few lines of code to add a new itemstack to the inventory with
the new key or drop it at the player position if the inventory is full.
Bush saplings grow in half the time of tree saplings.
Bushes do not need 'from sapling' schematic variants because only the
stem node is force-placed in the mapgen schematic, so only the sapling
is force-replaced.
Bush leaves drop saplings with a rarity that ensures at least 1 sapling
per bush on average.
Use the soil group more instead of checking for multiple node names.
Remove 'neighbors' from ABM.
Turn any flora to dry shrub if on a non-soil, except when on default:sand
to avoid dune grasses being replaced.
Search for "group:soil" when searching for a position for the new flora
node, instead of searching for multiple node names, however do not spread
flora onto desert sand, which is in the soil group.
Remove default:dirt_with_snow from the soil group as it would be frozen
soil. It can be dug and placed to turn it into dirt (consider this some
extra work needed to make it cultivatable).
Commit c68b8274fe prevented books from
being copied in the crafting grid, and made it so that old books, though
seemingly successfully transferred to the new format, could not be written
to as the old data still persisted.
Previously you could place junglegrass on dirt to convert that dirt to
dirt_with_grass, but this is unsuitable now that rainforest has a
surface of dirt_with_rainforest_litter.
Remove junglegrass from the 'grass' group.
Since meta secret field is blank on any keys (default:key) obtained using
/give, the game will crash if you attempt to use one of these. This follows
along the principle that the game should never have any reason to crash.
A simple set of biomes for now: Ocean, coniferous forest, grassland,
sandstone desert.
Update biome lists for blob ores and decorations.
Make sandstone desert filler 1 node deeper to match other deserts.
Instead of right click, the skeleton key is now a true `tool`
in the sense that it's default left-click action is to create
a key for the locked object.
This is far better than the outcome of the patches we've done
where the only way to create a key for a locked item was to
use sneak+rightclick. Now keys are perhaps a bit more sensible,
left for making keys, right for opening stuff with keys.
Fixes#1625
Currently jungletrees and junglegrass use sidelen 80 for simplicity,
but this results in a more uneven distribution of decorations. A more
even distribution helps keep rainforest darker with a more unbroken
canopy.
This is also more consistent. 80 is based on the default mapchunk
size, all other decorations use sidelen 16 or smaller to divide into
any mapchunk size.
Denser jungletree for darker rainforest:
Highest 'jungletree' nodes now prob 255.
Add a 5th lower branch layer.
Increase lower branch layer y-slice prob to 191.
Aspen:
Extend trunk upwards by 1 node to reduce leafdecay radius to 2.
Pine:
Make lower trunk 1 node longer so that lowest branches are more often
higher off the ground, also to make pines taller.
Appletree:
Make 2 opposite branches prob 255, the other 2 prob 127, to avoid
trees with 1 or 0 branches. Therefore also add random rotation.
Increase to 5 ladders from 7 sticks.
More generous to help with vertical travel.
Divide the log core volume of 14 * 14 * 16 cubic pixels by the volume of
a ladder node with two 2 * 2 * 16 side pieces and four 2 * 1 * 16 rungs
(cut down to length 14), to get 12.25 ladders per log.
The recipe of 7 stick items is 7 / 16 = 0.4375 logs.
Ladders per 7 stick items = 0.4375 * 12.25 = 5.36.
Utilizes the new key-meta (as with nodes) and the ability to set the description of an itemstack with the `description` meta key. Includes code to convert old metadata to new key-meta.
- beds
- boats
- carts
- key/skeleton key
- seeds
All these had on_place handlers that did not allow nodes with
an on_rightclick() handler to be used first (if not using
sneak). This code is taken from the torches mod and applied
everywhere.
This allows all these items to e.g. be inserted into the `frame`
mod's item frames.
Utilizes several new features allowing the description of an item to be changed using the `description` meta key. This also moves keys from using the old single-value itemstack metadata system to the new node-like metadata system.
Return to previous parameters interval = 1, chance = 2.
Compensates for the increase in default active block radius.
Large amounts of lava cooling at once is known to overload sound
creation, producing error messages.
As part of the original plan for a new lightcurve.
With the old lightcurve lights were so dim all light sources had light
source level 13 or 14 to compensate, resulting in almost no difference
between torchlight and a maximum brightness light.
The new lightcurve makes all light sources effectively much brighter by
spreading visually-bright light further, torches are now slightly too
bright. So now we can reduce the light source level of torches while
actually making them effectively brighter than with the old lightcurve.
This also creates a desirable difference between torchlight and a
maximum-brightness light source.
This implements a node-timer based leafdecay mechanism, and exposes
an API to use it in mods.
The API is documented in game_api.txt.
`default.register_leafdecay(leafdecaydef)`
`leafdecaydef` is a table, with following members:
{
trunks = { "default:tree"}, -- nodes considered trunks
leaves = { "default:leaves", "default:apple"}, -- nodes considered leaves
radius = 3, -- activates leafdecay this far from the trunk
}
The algorithm will drop `leaves` items in the area if no `trunks` are found
in the `trunk_radius` sized area around the position of the leaf. If a node
listed in `leaves` has a group `leafdecay_drop > 0`, then the item is dropped,
otherwise the item is removed but not dropped.
The algorithm also implements a value `default.leafdecay_speed` (default
15) which can be modified to increase or decrease of the leaf decay. The
algorithm will vary the actual speed a bit to introduce randomness.
Leaf decay is randomized by 0.1 seconds to reduce the chance that
decay happens many times on the same second interval. This requires
nodetimer_interval to be set to values lower than 1.0 to have an
effect.
The leaves will decay between 2 and 10 seconds after digging the trunk,
and happen at non-integer second intervals.
-- The API was added by sofar.
Plantlike drawtype no longer applies 'visual scale' twice, so now we
use the actual scale factor desired.
Remove unnecessary 'visual_scale = 1.0' lines.
Light level 14 to be able to grow plants.
3 returned from crafting with 1 glass node, 3 mese crystals and 1
wood plank.
Seamlessly placable on appletree wood fence posts.
Now that biomes are being specified for blob ores we need a separate
set of blob ore registrations for mgv6 which has no Biome API biomes
defined.
Various minor improvements to mapgen.lua.
