Commit Graph

173 Commits

Author SHA1 Message Date
danielmeek32
f33cc02080 Chests: Fix locked chest protection against explosions (#1886)
Fixes #1885
2017-09-20 20:08:17 +02:00
tenplus1
c5c9e423ca Chests: Fix open chest after player leave (#1884)
This should fix the chest staying open when a player disconnects while inside.
2017-09-20 20:08:06 +02:00
rubenwardy
20687a6301 Make ice slippery 2017-08-14 19:06:54 +01:00
Ezhh
40ed77185e Improve node descriptions (#1834) 2017-07-23 10:26:10 +02:00
SmallJoker
e5189760b3 Default: Expose the formspec getter functions (#1783) 2017-07-16 14:31:34 +02:00
paramat
0cdee1d8f5 Saplings: Reduce grow time to ABM equivalent
Previous times were chosen using statistical maths, but reports suggested
this was too long.
I tested by timing an ABM acting on 100 nodes, with interval and chance equal
to the old sapling ABM.
50 at 4m59s.
99 at 24m58s.
100 at 26m58s.
So choose a grow time between 5 and 25 min for tree and bush saplings.
If 'can grow' is false at grow time the timer is reset to 5 min.
2017-07-08 14:51:03 +01:00
DS-Minetest
2e413b521a Add backface_culling to open chests and fencegates 2017-07-02 11:32:34 +01:00
Ezhh
3d1fc42f66 Make sapling, leaves and fence descriptions consistent (#1795) 2017-06-25 11:19:12 +02:00
paramat
120e96938d Chests: Check 'def' of node above chest to avoid crash
In 'chest_lid_obstructed(pos)' check for nil 'def' to avoid a crash caused by
an unknown node above the chest.
2017-06-16 04:11:33 +01:00
MrIbby
18956c7f69 Change "Junglewood" to "Jungle Wood" 2017-06-03 11:55:13 -04:00
Vanessa Ezekowitz
d104b9b10f Chest: Redo new chests to use single-tile textures where possible
This keeps the filenames the same, but adds a new "inside" double texture
for the open chest.
Use regular drawtype for closed chest and delete the "cube.obj" model.
X-flip the right-side texture for the closed chest.
2017-05-18 09:45:56 +01:00
tenplus1
63b3542d00 Chests: Revert inventory name
Revert the new 'default:game' inventory back to the old 'main' and use the
lbm to restore the contents of the chest.
Change the name of the conversion LBM to ensure it is run again on already
converted chests.
2017-05-15 13:47:03 +01:00
cx384
5bd44c21ef Change the selection_box of bush stems (#1733)
This is needed because you can't place a node above a bush stem when you are pointing at the bush stem.
2017-05-13 12:49:04 +02:00
Auke Kok
55f81d0802 Fix nil deref issue with people hitting chests too often. 2017-05-07 20:47:17 -07:00
Auke Kok
011ad78b42 Improve Chest appearance - opening chests.
Adds a mesh model that appears when a chest is opened. The chest
stays visibly open as long as the player keeps it open. When the
player closes the formspec, the chest returns back to the closed
shape. While opening and closing, a sound plays.

A second person inspecting the chest will trigger a second sound
open. However, only after the last player closes the chest, does the
chest actually visually close and is the sound close played. This
keeps mesh updates to a minimum.

While it's possible that a server shutting down may cause chests
to remain open, this does not affect the chests' working matter,
and opening or closing them should fix them.

Old chests are converted to the new style by LBM. I previously
had them converted on open but this was unreliable, and LBMs
don't have that problem.

Open chests cannot be dug up. This prevents people from keeping
a chest open and digging it out as well, since closing a chest
would place a chest back (swap) at the spot. We could protect
against this, but it still messes up the client and causes a lot
of "missing node inventory" error messages otherwise. It's
unlikely but possible that a player lagging out causes a chest
to stay "open" and thus unremovable by digging, but there are
other ways of dealing with that - a server restart fixes that
issue.

If the lid of the chest is obstructed, the sounds continue to play,
but the lid isn't opened. Obstructed means that a node is present
above the chest lid, however, we ignore several node types like signs,
torches (not 3d) and wallmounted nodeboxes (typically signs) since
they don't pose any major obstruction in almost any case, and are
typically found above chests. Additionally, the selection box of the
opened chest does not include the lid, and so one can still interact
with e.g. a sign behind an open lid.

Due to the fact that chests now have 7+ textures, we can no longer
use materials (limit: 6) to texture the chest, and so there is now
a single UV mapped image that applies both to open and closed chests.
While this does mean texture pack makers need to create it, this
is extremely simple and consists of a simple cut'n'paste over the
template and should be really easy to do. Only one texture file is
now then used for both open and closed chests.
2017-05-01 19:36:35 +01:00
paramat
2668619638 Ores: Add tin ore, lump, ingot and block
Use Calinou's textures from moreores mod.
Craft bronze from tin and copper instead of steel and copper.
Match ore density to the moreores mod but start ore at a depth of
y = -32 to be part of the depth progression of other ores.
2017-04-20 19:55:05 +01:00
paramat
a57d2db54a Bushes: Add saplings
Bush saplings grow in half the time of tree saplings.
Bushes do not need 'from sapling' schematic variants because only the
stem node is force-placed in the mapgen schematic, so only the sapling
is force-replaced.
Bush leaves drop saplings with a rarity that ensures at least 1 sapling
per bush on average.
2017-04-12 17:18:50 +01:00
paramat
2f46103ff8 Glasslike_framed nodes: Add 'glasslikeliquidlevel' paramtype2 2017-03-30 04:24:23 +01:00
paramat
86fd616f3c Flora spread: Allow spread on rainforest litter. Other improvements
Use the soil group more instead of checking for multiple node names.
Remove 'neighbors' from ABM.
Turn any flora to dry shrub if on a non-soil, except when on default:sand
to avoid dune grasses being replaced.
Search for "group:soil" when searching for a position for the new flora
node, instead of searching for multiple node names, however do not spread
flora onto desert sand, which is in the soil group.

Remove default:dirt_with_snow from the soil group as it would be frozen
soil. It can be dug and placed to turn it into dirt (consider this some
extra work needed to make it cultivatable).
2017-03-20 00:14:56 +00:00
paramat
d2aae95c39 Leafdecay: Change Aspen radius back to 3
Although the new aspen tree schematic only requires a radius of 2 the
many existing aspen trees in a world require radius 3.
2017-03-17 05:52:06 +00:00
paramat
02921baa7a Junglegrass: Prevent seeding of dirt_with_grass
Previously you could place junglegrass on dirt to convert that dirt to
dirt_with_grass, but this is unsuitable now that rainforest has a
surface of dirt_with_rainforest_litter.
Remove junglegrass from the 'grass' group.
2017-03-17 05:52:06 +00:00
SmallJoker
b87ef5ccde Keys: Update default.can_interact_with_node to new item meta
Completes a forgotten update in 9d3a526
2017-03-12 12:20:31 -07:00
paramat
07a5fca432 Leafdecay: Register leafdecay for bush leaves 2017-03-12 10:20:26 +00:00
paramat
0f0dd0f6e8 Tree schematics: Alter jungletree, aspen, pine, appletree
Denser jungletree for darker rainforest:
Highest 'jungletree' nodes now prob 255.
Add a 5th lower branch layer.
Increase lower branch layer y-slice prob to 191.

Aspen:
Extend trunk upwards by 1 node to reduce leafdecay radius to 2.

Pine:
Make lower trunk 1 node longer so that lowest branches are more often
higher off the ground, also to make pines taller.

Appletree:
Make 2 opposite branches prob 255, the other 2 prob 127, to avoid
trees with 1 or 0 branches. Therefore also add random rotation.
2017-03-10 19:28:38 +00:00
Diego Martínez
1d45b27c12 Add desert/silver sandstone-related blocks. (#1596)
Add desert and silver sand-related blocks, and stairs.
2017-03-06 19:03:30 -08:00
paramat
d1b132555b Biomes: New surface node for rainforest
Moist rainforest plant litter.
Textures by npx.
2017-02-28 05:32:19 +00:00
octacian
9d3a526324 Keys: Show owner in description
Utilizes several new features allowing the description of an item to be changed using the `description` meta key. This also moves keys from using the old single-value itemstack metadata system to the new node-like metadata system.
2017-02-27 19:00:14 -08:00
MarkuBu
60e5b299af Leafdecay: Node timer based implementation, API
This implements a node-timer based leafdecay mechanism, and exposes
an API to use it in mods.

The API is documented in game_api.txt.

`default.register_leafdecay(leafdecaydef)`

`leafdecaydef` is a table, with following members:
{
	trunks = { "default:tree"}, -- nodes considered trunks
	leaves = { "default:leaves", "default:apple"}, -- nodes considered leaves
	radius = 3, -- activates leafdecay this far from the trunk
}

The algorithm will drop `leaves` items in the area if no `trunks` are found
in the `trunk_radius` sized area around the position of the leaf. If a node
listed in `leaves` has a group `leafdecay_drop > 0`, then the item is dropped,
otherwise the item is removed but not dropped.

The algorithm also implements a value `default.leafdecay_speed` (default
15) which can be modified to increase or decrease of the leaf decay. The
algorithm will vary the actual speed a bit to introduce randomness.

Leaf decay is randomized by 0.1 seconds to reduce the chance that
decay happens many times on the same second interval. This requires
nodetimer_interval to be set to values lower than 1.0 to have an
effect.

The leaves will decay between 2 and 10 seconds after digging the trunk,
and happen at non-integer second intervals.

-- The API was added by sofar.
2017-02-25 03:50:15 +00:00
Thomas--S
37dd910747 Globalize, rename and change the behaviour of has_locked_chest_privilege
* rename to default.can_interact_with_node()
* pass pos instead of meta
* change order of arguments
2017-02-21 10:17:12 -08:00
paramat
0819d4bade Visual scale: Update plantlike nodes to post-bugfix values
Plantlike drawtype no longer applies 'visual scale' twice, so now we
use the actual scale factor desired.
Remove unnecessary 'visual_scale = 1.0' lines.
2017-02-12 01:27:34 +00:00
Paramat
86849d9eec Default: Add nodebox mese post light usable as a growlamp (#1480)
Light level 14 to be able to grow plants.
3 returned from crafting with 1 glass node, 3 mese crystals and 1
wood plank.
Seamlessly placable on appletree wood fence posts.
2017-02-08 16:01:30 -08:00
paramat
2b215848d8 Trees: Add 'snowy' group for pine sapling snow detection
Use the 'snowy' group in the 'is snow nearby' function instead of
default nodes. Often snow nodes are not from the default mod.
2017-02-01 17:51:44 +00:00
paramat
58038a7941 Snappy group: Remove beds and cactus from group 2016-12-05 01:41:41 +00:00
Auke Kok
4f32fd253c Fix ItemStack method call for keys.
Fixes (I hope) #1420 (bad method call).
2016-11-27 18:26:31 -08:00
Auke Kok
e4b1c93512 Keys: Allow easy sharing of access without commands
This code adds the key concept to minetest_game, and integrates it
with lockable nodes. Currently supported lockable items are the Steel
Door, the Steel Trapdoor, and the Locked Chest.

The goal of this modification is to introduce a fine-grained multi-
player permission system that is intuitive and usable without any
console or chat commands, and doesn't require extra privileges to
be granted or setup. Keys can also physically be conveyed to other
players, adding to gameplay and adding some personality that is
preferable to console commands or editing formspecs.

A skeleton key can be crafted with 1 gold ingot. Skeleton keys can
then be matched to a lockable node by right-clicking the skeleton
key on a lockable node, which changes the skeleton key to a "key".

Gold was chosen as it's currently a not-so very useful item, and
therefore it's likely that players have some, but aren't really
using it for any purpose.

This key can subsequently used by any player to open or access that
lockable node, including retrieving items from Locked Chests, or
putting items in them.

They key is programmed to fit only the particular locked node it is
programmed to. This is achieved by storing a secret value in both
key and locked node. If this secret value doesn't match, the key
will not open the locked node. This allows many keys to be created
for one chest or door, but a key will only fit one node ever. The
secrets are stored in node, and item meta for the key.

If a locked node is removed, all keys that opened it are no longer
valid. Even if a new door/chest is placed in exactly the same spot,
the old keys will no longer fit that node.

Keys can be smelted back in gold ingots if they are no longer useful.

The method of storing a secret in nodemeta and itemstackmeta is secure
as there is no way for the client to create new items on the server
with a particular secret metadata value. Even if you could possible
create such an itemstack on the client, the server does not ever read
itemstackmeta from a client package.

The patch adds an API that allows other nodes and nodes added by
mods to use the same keys as well. The method how to implement this
is described in game_api.txt. The mod should add 2 callbacks to it's
node definition. Example code is given.

Textures are from PixelBOX, thanks to Gambit.
2016-11-25 03:01:14 +00:00
Auke Kok
0bd2efcfc1 Merge 'torches' mod as default:torch.
This merges the current state of the well-maintained and tested
`torches` mod as I've maintained it for the last 6 months.

This started out as a thorough cleanup of 3D torches by blockmen,
where some of the initial code still remains.

The models were redone entirely from scratch and have been extensively
tested with dozens of animated textures converted with mcimport,
and look a lot better than the original 3D Torches mod.

The ceiling torch is retained and functional. The `wieldlight`
addition that the torches mod has was removed, since it relies
on wieldview to look decent. This can stay external mod code.

I've opted to move the torch nodes to a separate file. It's not
a lot of code but nodes.lua is already huge, and I wanted to
retain the copyright header and some of the readme.txt notes,
and this was the easiest way of doing it.

This code passes "default:torch" to nodes with on_rightclick,
fixing problems with itemframes. Essentially it has a more
elaborate item_place() routine to make sure we're not passing
the wall torch to nodes that may display it.

The ceiling torch is a separate model and not the same as the
floor model. That does mean that there are 3 models in this
mod.
2016-11-23 15:29:53 -08:00
paramat
ec95f47021 Default: Add water footstep sounds
Plus one silent sound to break repetition 'default_water_footstep.4.ogg'.
2016-11-21 03:19:37 +00:00
Auke Kok
1e691c4429 Carts: Merge boost_cart as "carts" mod
This is all the working code from SmallJoker's boost_cart, poored into
a more suitable form for minetest_game.

- Mesecons and moreores stuff was removed entirely.
- Textures were all renamed and moved out of default/
- Updated license, readme.txt, attribution
- Changed code license to MIT, left artwork at CC0
- removed default:rail and made aliases for it
- :carts:rail is now carts:rail.
- localized entity def
- removed copper rail entirely
- startstop rail was removed, as well as detector rail
- remodeled to b3d using stujones11 excellent blend model, but sizes
  of cart adjusted to make pixel sizes consistent (0.625) everywhere.
- slightly more complex texture map for the cart (front/side visibly
  different)
- rail parameters are passed as a separate def table, and stored in
  a private list. This avoids having to call `get_meta` on every
  node. In return, we need the node name, though.
- adds metal sounds (based on default metal sound function) and
  cart moving sound.
- reduced cart speeds to max 7, 5 by pushing.
- Added on_step() rail event handler, gets called when a cart is on
  a rail.
- Added various rebased updates from upstream (thanks Krock)
- Included a fix that removes the 'reverse jiggle' when stopping.
- Included reworked textures by sofar.

The mod namespace is still public, but I'm NOT declaring it an API. I'd
rather see it localized instead, for now. Any public interface in this
code is *experimental* at best, and should be considered non-stable and
unsupported for now.
2016-11-21 03:15:04 +00:00
paramat
c3f3406e8e Default: Add 'group:cools_lava' for lavacooling by snowblock and ice
Make lava cooling ABM use a new group 'group:cools_lava'.
Nodes other than water can cool lava. We assume snowblock and ice melt,
turn to water and cool lava.
Leave 'group:water' present temporarily to not break mod liquids.
2016-11-18 08:09:45 +00:00
sfan5
7fbf25d6ca Do not show item overlay if slot is occupied by item (bookshelf, vessels shelf) 2016-11-14 20:03:49 +01:00
paramat
ddea6c431e Default: Make snowblock change 'dirt with grass' below
To be consistent with the snow slab.
2016-11-10 08:10:34 +00:00
paramat
614e9cfe8d Default: Make snow walkable again 2016-11-10 08:10:29 +00:00
Wuzzy
6e00ddee2a Default, vessels: Darken shelf empty slot icons
Rename slot icons.
2016-11-07 14:32:35 +00:00
paramat
c7e2d59461 Default: Add 'acacia leaves simple' texture
A deeper, darker level of leaves is created by tiling the texture
2 by 2, reducing brightness and offsetting this.
For a denser leaf appearence with the 'simple leaves' setting.
Also used for acacia bush leaves.
2016-11-06 08:25:53 +00:00
paramat
178db04526 Default, flowers: Improve plant selection boxes
Selection box width is limited to 14 / 16 node to visually
distinguish box from any neighbouring cubic nodes.
2016-11-05 09:14:10 +00:00
Wuzzy
0acd9a2ccb Add icon overlay to shelf inventory slots 2016-10-30 15:32:43 -07:00
paramat
02a82c9d7a Default: Remove unnecessary leaf 'visual scale' 2016-10-29 14:44:00 +01:00
paramat
048aaa2616 Default: Add bush stem and leaves nodes
To allow mapgen bushes in green-grass and savanna grasslands.
Nodes for a generic bush and an acacia bush.
Stem nodes are craftable to a single wood node to provide a small
amount of wood resource in grasslands.
Fuel times are that of corresponding 'wood' nodes, 1/4 that of
corresponding tree nodes.
No leafdecay to enable use as hedges or without a nearby tree trunk.
Uses 'default leaves simple' texture for extra visual thickness.
2016-10-27 02:54:04 +01:00
Fernando Carmona Varo
3c9d71e6f7 Make flammable: Flowers, grasses and several crafitems 2016-10-25 02:37:36 +01:00
Auke Kok
fbac9be51c Change many metal nodes to use default metal sounds 2016-10-25 02:37:36 +01:00