Merge remote-tracking branch 'upstream/master' into nalc-1.2-dev

This commit is contained in:
Sys Quatre 2020-06-14 17:04:59 +02:00
commit 9ab325fa8c
12 changed files with 918 additions and 167 deletions

View File

@ -43,5 +43,6 @@ SOFTWARE.
### [Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0)](http://creativecommons.org/licenses/by-sa/3.0/)
* `nether_rack.png`: Zeg9
* `nether_glowstone.png`: BlockMen
* `nether_portal.png`: [Extex101](https://github.com/Extex101), 2020
All other media: Copyright © 2013 PilzAdam, licensed under CC BY-SA 3.0 by PilzAdam.

View File

@ -38,25 +38,40 @@ nether = {}
nether.modname = minetest.get_current_modname()
nether.path = minetest.get_modpath(nether.modname)
nether.get_translator = S
-- nether.useBiomes allows other mods to know whether they can register ores etc. in the Nether.
-- See mapgen.lua for an explanation of why minetest.read_schematic is being checked
nether.useBiomes = minetest.get_mapgen_setting("mg_name") ~= "v6" and minetest.read_schematic ~= nil
-- Settings
nether.DEPTH = -25000 -- The y location of the Nether
nether.FASTTRAVEL_FACTOR = 8 -- 10 could be better value for Minetest, since there's no sprint, but ex-Minecraft players will be mathing for 8
nether.PORTAL_BOOK_LOOT_WEIGHTING = 0.9 -- Likelyhood of finding the Book of Portals (guide) in dungeon chests. Set to 0 to disable.
nether.NETHER_REALM_ENABLED = true -- Setting to false disables the Nether and Nether portal
nether.DEPTH_CEILING = -25000 -- The y location of the Nether's celing
nether.DEPTH_FLOOR = -31000 -- The y location of the Nether's floor
nether.FASTTRAVEL_FACTOR = 8 -- 10 could be better value for Minetest, since there's no sprint, but ex-Minecraft players will be mathing for 8
nether.PORTAL_BOOK_LOOT_WEIGHTING = 0.9 -- Likelyhood of finding the Book of Portals (guide) in dungeon chests. Set to 0 to disable.
nether.NETHER_REALM_ENABLED = true -- Setting to false disables the Nether and Nether portal
-- Override default settings with values from the .conf file, if any are present.
nether.FASTTRAVEL_FACTOR = tonumber(minetest.settings:get("nether_fasttravel_factor") or nether.FASTTRAVEL_FACTOR)
nether.PORTAL_BOOK_LOOT_WEIGHTING = tonumber(minetest.settings:get("nether_portalBook_loot_weighting") or nether.PORTAL_BOOK_LOOT_WEIGHTING)
nether.NETHER_REALM_ENABLED = minetest.settings:get_bool("nether_realm_enabled", nether.NETHER_REALM_ENABLED) or nether.NETHER_REALM_ENABLED
nether.NETHER_REALM_ENABLED = minetest.settings:get_bool("nether_realm_enabled", nether.NETHER_REALM_ENABLED)
nether.DEPTH_CEILING = tonumber(minetest.settings:get("nether_depth_ymax") or nether.DEPTH_CEILING)
nether.DEPTH_FLOOR = tonumber(minetest.settings:get("nether_depth_ymin") or nether.DEPTH_FLOOR)
if nether.DEPTH_FLOOR + 1000 > nether.DEPTH_CEILING then
error("The lower limit of the Nether must be set at least 1000 lower than the upper limit, and more than 3000 is recommended. Set settingtypes.txt, or 'All Settings' -> 'Mods' -> 'nether' -> 'Nether depth'", 0)
end
nether.DEPTH = nether.DEPTH_CEILING -- Deprecated, use nether.DEPTH_CEILING instead.
-- Load files
dofile(nether.path .. "/portal_api.lua")
dofile(nether.path .. "/nodes.lua")
if nether.NETHER_REALM_ENABLED then
dofile(nether.path .. "/mapgen.lua")
if nether.useBiomes then
dofile(nether.path .. "/mapgen.lua")
else
dofile(nether.path .. "/mapgen_nobiomes.lua")
end
end
dofile(nether.path .. "/portal_examples.lua")
@ -83,7 +98,7 @@ This opens to a truly hellish place, though for small mercies the air there is s
The expedition parties have found no diamonds or gold, and after an experienced search party failed to return from the trail of a missing expedition party, I must conclude this is a dangerous place.]], 10 * nether.FASTTRAVEL_FACTOR),
is_within_realm = function(pos) -- return true if pos is inside the Nether
return pos.y < nether.DEPTH
return pos.y < nether.DEPTH_CEILING
end,
find_realm_anchorPos = function(surface_anchorPos)
@ -91,7 +106,7 @@ The expedition parties have found no diamonds or gold, and after an experienced
local destination_pos = vector.divide(surface_anchorPos, nether.FASTTRAVEL_FACTOR)
destination_pos.x = math.floor(0.5 + destination_pos.x) -- round to int
destination_pos.z = math.floor(0.5 + destination_pos.z) -- round to int
destination_pos.y = nether.DEPTH - 1000 -- temp value so find_nearest_working_portal() returns nether portals
destination_pos.y = nether.DEPTH_CEILING - 1000 -- temp value so find_nearest_working_portal() returns nether portals
-- a y_factor of 0 makes the search ignore the altitude of the portals (as long as they are in the Nether)
local existing_portal_location, existing_portal_orientation =
@ -100,7 +115,7 @@ The expedition parties have found no diamonds or gold, and after an experienced
if existing_portal_location ~= nil then
return existing_portal_location, existing_portal_orientation
else
local start_y = nether.DEPTH - math.random(500, 1500) -- Search starting altitude
local start_y = nether.DEPTH_CEILING - math.random(500, 1500) -- Search starting altitude
destination_pos.y = nether.find_nether_ground_y(destination_pos.x, destination_pos.z, start_y)
return destination_pos
end

View File

@ -22,11 +22,164 @@
-- Parameters
local NETHER_DEPTH = nether.DEPTH
local NETHER_CEILING = nether.DEPTH_CEILING
local NETHER_FLOOR = nether.DEPTH_FLOOR
local TCAVE = 0.6
local BLEND = 128
-- Stuff
local math_max, math_min = math.max, math.min -- avoid needing table lookups each time a common math function is invoked
if minetest.read_schematic == nil then
-- Using biomes to create the Nether requires the ability for biomes to set "node_cave_liquid = air".
-- This feature was introduced by paramat in b1b40fef1 on 2019-05-19, but we can't test for
-- it directly. However b2065756c was merged a few months later (in 2019-08-14) and it is easy
-- to directly test for - it adds minetest.read_schematic() - so we use this as a proxy-test
-- for whether the Minetest engine is recent enough to have implemented node_cave_liquid=air
error("This " .. nether.modname .. " mapgen requires Minetest v5.1 or greater, use mapgen_nobiomes.lua instead.", 0)
end
local function override_underground_biomes()
-- https://forum.minetest.net/viewtopic.php?p=257522#p257522
-- Q: Is there a way to override an already-registered biome so I can get it out of the
-- way of my own underground biomes without disturbing the other biomes registered by
-- default?
-- A: No, all you can do is use a mod to clear all biomes then re-register the complete
-- set but with your changes. It has been described as hacky but this is actually the
-- official way to alter biomes, most mods and subgames would want to completely change
-- all biomes anyway.
-- To avoid the engine side of mapgen becoming overcomplex the approach is to require mods
-- to do slightly more complex stuff in Lua.
-- take a copy of all biomes, decorations, and ores. Regregistering a biome changes its ID, so
-- any decorations or ores using the 'biomes' field must afterwards be cleared and re-registered.
-- https://github.com/minetest/minetest/issues/9288
local registered_biomes_copy = {}
local registered_decorations_copy = {}
local registered_ores_copy = {}
for old_biome_key, old_biome_def in pairs(minetest.registered_biomes) do
registered_biomes_copy[old_biome_key] = old_biome_def
end
for old_decoration_key, old_decoration_def in pairs(minetest.registered_decorations) do
registered_decorations_copy[old_decoration_key] = old_decoration_def
end
for old_ore_key, old_ore_def in pairs(minetest.registered_ores) do
registered_ores_copy[old_ore_key] = old_ore_def
end
-- clear biomes, decorations, and ores
minetest.clear_registered_decorations()
minetest.clear_registered_ores()
minetest.clear_registered_biomes()
-- Restore biomes, adjusted to not overlap the Nether
for biome_key, new_biome_def in pairs(registered_biomes_copy) do
local biome_y_max, biome_y_min = tonumber(new_biome_def.y_max), tonumber(new_biome_def.y_min)
if biome_y_max > NETHER_FLOOR and biome_y_min < NETHER_CEILING then
-- This biome occupies some or all of the depth of the Nether, shift/crop it.
local spaceOccupiedAbove = biome_y_max - NETHER_CEILING
local spaceOccupiedBelow = NETHER_FLOOR - biome_y_min
if spaceOccupiedAbove >= spaceOccupiedBelow or biome_y_min <= -30000 then
-- place the biome above the Nether
-- We also shift biomes which extend to the bottom of the map above the Nether, since they
-- likely only extend that deep as a catch-all, and probably have a role nearer the surface.
new_biome_def.y_min = NETHER_CEILING + 1
new_biome_def.y_max = math_max(biome_y_max, NETHER_CEILING + 2)
else
-- shift the biome to below the Nether
new_biome_def.y_max = NETHER_FLOOR - 1
new_biome_def.y_min = math_min(biome_y_min, NETHER_CEILING - 2)
end
end
minetest.register_biome(new_biome_def)
end
-- Restore biome decorations
for decoration_key, new_decoration_def in pairs(registered_decorations_copy) do
minetest.register_decoration(new_decoration_def)
end
-- Restore biome ores
for ore_key, new_ore_def in pairs(registered_ores_copy) do
minetest.register_ore(new_ore_def)
end
end
-- Shift any overlapping biomes out of the way before we create the Nether biomes
override_underground_biomes()
-- nether:native_mapgen is used to prevent ores and decorations being generated according
-- to landforms created by the native mapgen.
-- Ores and decorations are registered against "nether:rack" instead, and the lua
-- on_generate() callback will carve the Nether with nether:rack before invoking
-- generate_decorations and generate_ores.
minetest.register_node("nether:native_mapgen", {})
minetest.register_biome({
name = "nether_caverns",
node_stone = "nether:native_mapgen", -- nether:native_mapgen is used here to prevent the native mapgen from placing ores and decorations.
node_filler = "nether:native_mapgen", -- The lua on_generate will transform nether:rack_native into nether:rack then decorate and add ores.
node_dungeon = "nether:brick",
--node_dungeon_alt = "default:mossycobble",
node_dungeon_stair = "stairs:stair_nether_brick",
-- Setting node_cave_liquid to "air" avoids the need to filter lava and water out of the mapchunk and
-- surrounding shell (overdraw nodes beyond the mapchunk).
-- This feature was introduced by paramat in b1b40fef1 on 2019-05-19, and this mapgen.lua file should only
-- be run if the Minetest version includes it. The earliest tag made after 2019-05-19 is 5.1.0 on 2019-10-13,
-- however we shouldn't test version numbers. minetest.read_schematic() was added by b2065756c and merged in
-- 2019-08-14 and is easy to test for, we don't use it but it should make a good proxy-test for whether the
-- Minetest version is recent enough to have implemented node_cave_liquid=air
node_cave_liquid = "air",
y_max = NETHER_CEILING,
y_min = NETHER_FLOOR,
vertical_blend = 0,
heat_point = 50,
humidity_point = 50,
})
-- Ores and decorations
dofile(nether.path .. "/mapgen_decorations.lua")
minetest.register_ore({
ore_type = "scatter",
ore = "nether:glowstone",
wherein = "nether:rack",
clust_scarcity = 11 * 11 * 11,
clust_num_ores = 3,
clust_size = 2,
y_max = NETHER_CEILING,
y_min = NETHER_FLOOR,
})
minetest.register_ore({
ore_type = "scatter",
ore = "default:lava_source",
wherein = "nether:rack",
clust_scarcity = 32 * 32 * 32,
clust_num_ores = 4,
clust_size = 2,
y_max = NETHER_CEILING,
y_min = NETHER_FLOOR,
})
minetest.register_ore({
ore_type = "blob",
ore = "nether:sand",
wherein = "nether:rack",
clust_scarcity = 14 * 14 * 14,
clust_size = 8,
y_max = NETHER_CEILING,
y_min = NETHER_FLOOR
})
-- Mapgen
-- 3D noise
local np_cave = {
@ -40,159 +193,275 @@ local np_cave = {
--flags = ""
}
-- Stuff
local yblmax = NETHER_DEPTH - BLEND * 2
-- Mapgen
-- Initialize noise object, localise noise and data buffers
-- Buffers and objects we shouldn't recreate every on_generate
local nobj_cave = nil
local nbuf_cave = nil
local dbuf = nil
local yblmin = NETHER_FLOOR + BLEND * 2
local yblmax = NETHER_CEILING - BLEND * 2
-- Content ids
local c_air = minetest.get_content_id("air")
local c_air = minetest.get_content_id("air")
local c_netherrack = minetest.get_content_id("nether:rack")
local c_netherbrick = minetest.get_content_id("nether:brick")
local c_netherbrick_slab = minetest.get_content_id("stairs:slab_nether_brick")
local c_netherfence = minetest.get_content_id("nether:fence_nether_brick")
local c_glowstone = minetest.get_content_id("nether:glowstone")
local c_lava_source = minetest.get_content_id("default:lava_source")
local c_native_mapgen = minetest.get_content_id("nether:native_mapgen")
--local c_stone_with_coal = minetest.get_content_id("default:stone_with_coal")
--local c_stone_with_iron = minetest.get_content_id("default:stone_with_iron")
local c_stone_with_mese = minetest.get_content_id("default:stone_with_mese")
local c_stone_with_diamond = minetest.get_content_id("default:stone_with_diamond")
local c_stone_with_gold = minetest.get_content_id("default:stone_with_gold")
--local c_stone_with_copper = minetest.get_content_id("default:stone_with_copper")
local c_mese = minetest.get_content_id("default:mese")
local c_gravel = minetest.get_content_id("default:gravel")
local c_dirt = minetest.get_content_id("default:dirt")
local c_sand = minetest.get_content_id("default:sand")
-- Dungeon excavation functions
local c_cobble = minetest.get_content_id("default:cobble")
local c_mossycobble = minetest.get_content_id("default:mossycobble")
local c_stair_cobble = minetest.registered_nodes["moreblocks:stair_cobble"] and minetest.get_content_id("moreblocks:stair_cobble") or minetest.get_content_id("stairs:stair_cobble")
function build_dungeon_room_list(data, area)
local c_lava_source = minetest.get_content_id("default:lava_source")
local c_lava_flowing = minetest.get_content_id("default:lava_flowing")
local c_water_source = minetest.get_content_id("default:water_source")
local c_water_flowing = minetest.get_content_id("default:water_flowing")
local result = {}
local c_glowstone = minetest.get_content_id("nether:glowstone")
local c_nethersand = minetest.get_content_id("nether:sand")
local c_netherbrick = minetest.get_content_id("nether:brick")
local c_netherrack = minetest.get_content_id("nether:rack")
-- Unfortunately gennotify only returns dungeon rooms, not corridors.
-- We don't need to check for temples because only dungeons are generated in biomes
-- that define their own dungeon nodes.
local gennotify = minetest.get_mapgen_object("gennotify")
local roomLocations = gennotify["dungeon"] or {}
-- Excavation should still know to stop if a cave or corridor has removed the dungeon wall.
-- See MapgenBasic::generateDungeons in mapgen.cpp for max room sizes.
local maxRoomSize = 18
local maxRoomRadius = math.ceil(maxRoomSize / 2)
local xStride, yStride, zStride = 1, area.ystride, area.zstride
local minEdge, maxEdge = area.MinEdge, area.MaxEdge
for _, roomPos in ipairs(roomLocations) do
if area:containsp(roomPos) then -- this safety check does not appear to be necessary, but lets make it explicit
local room_vi = area:indexp(roomPos)
--data[room_vi] = minetest.get_content_id("default:torch") -- debug
local startPos = vector.new(roomPos)
if roomPos.y + 1 <= maxEdge.y and data[room_vi + yStride] == c_air then
-- The roomPos coords given by gennotify are at floor level, but whenever possible we
-- want to be performing searches a node higher than floor level to avoids dungeon chests.
startPos.y = startPos.y + 1
room_vi = area:indexp(startPos)
end
local bound_min_x = math_max(minEdge.x, roomPos.x - maxRoomRadius)
local bound_min_y = math_max(minEdge.y, roomPos.y - 1) -- room coords given by gennotify are on the floor
local bound_min_z = math_max(minEdge.z, roomPos.z - maxRoomRadius)
local bound_max_x = math_min(maxEdge.x, roomPos.x + maxRoomRadius)
local bound_max_y = math_min(maxEdge.y, roomPos.y + maxRoomSize) -- room coords given by gennotify are on the floor
local bound_max_z = math_min(maxEdge.z, roomPos.z + maxRoomRadius)
local room_min = vector.new(startPos)
local room_max = vector.new(startPos)
local vi = room_vi
while room_max.y < bound_max_y and data[vi + yStride] == c_air do
room_max.y = room_max.y + 1
vi = vi + yStride
end
vi = room_vi
while room_min.y > bound_min_y and data[vi - yStride] == c_air do
room_min.y = room_min.y - 1
vi = vi - yStride
end
vi = room_vi
while room_max.z < bound_max_z and data[vi + zStride] == c_air do
room_max.z = room_max.z + 1
vi = vi + zStride
end
vi = room_vi
while room_min.z > bound_min_z and data[vi - zStride] == c_air do
room_min.z = room_min.z - 1
vi = vi - zStride
end
vi = room_vi
while room_max.x < bound_max_x and data[vi + xStride] == c_air do
room_max.x = room_max.x + 1
vi = vi + xStride
end
vi = room_vi
while room_min.x > bound_min_x and data[vi - xStride] == c_air do
room_min.x = room_min.x - 1
vi = vi - xStride
end
local roomInfo = vector.new(roomPos)
roomInfo.minp = room_min
roomInfo.maxp = room_max
result[#result + 1] = roomInfo
end
end
return result;
end
-- Only partially excavates dungeons, the rest is left as an exercise for the player ;)
-- (Corridors and the parts of rooms which extend beyond the emerge boundary will remain filled)
function excavate_dungeons(data, area, rooms)
-- any air from the native mapgen has been replaced by netherrack, but
-- we don't want this inside dungeons, so fill dungeon rooms with air
for _, roomInfo in ipairs(rooms) do
local room_min = roomInfo.minp
local room_max = roomInfo.maxp
for z = room_min.z, room_max.z do
for y = room_min.y, room_max.y do
local vi = area:index(room_min.x, y, z)
for x = room_min.x, room_max.x do
if data[vi] == c_netherrack then data[vi] = c_air end
vi = vi + 1
end
end
end
end
end
-- Since we already know where all the rooms and their walls are, and have all the nodes stored
-- in a voxelmanip already, we may as well add a little Nether flair to the dungeons found here.
function decorate_dungeons(data, area, rooms)
local xStride, yStride, zStride = 1, area.ystride, area.zstride
local minEdge, maxEdge = area.MinEdge, area.MaxEdge
for _, roomInfo in ipairs(rooms) do
local room_min, room_max = roomInfo.minp, roomInfo.maxp
local room_size = vector.distance(room_min, room_max)
if room_size > 10 then
local room_seed = roomInfo.x + 3 * roomInfo.z + 13 * roomInfo.y
local window_y = roomInfo.y + math_min(2, room_max.y - roomInfo.y - 1)
if room_seed % 3 == 0 and room_max.y < maxEdge.y then
-- Glowstone chandelier
local vi = area:index(roomInfo.x, room_max.y + 1, roomInfo.z)
if data[vi] == c_netherbrick then data[vi] = c_glowstone end
elseif room_seed % 4 == 0 and room_min.y > minEdge.y
and room_min.x > minEdge.x and room_max.x < maxEdge.x
and room_min.z > minEdge.z and room_max.z < maxEdge.z then
-- lava well (feel free to replace with a fancy schematic)
local vi = area:index(roomInfo.x, room_min.y, roomInfo.z)
if data[vi - yStride] == c_netherbrick then data[vi - yStride] = c_lava_source end
if data[vi - zStride] == c_air then data[vi - zStride] = c_netherbrick_slab end
if data[vi + zStride] == c_air then data[vi + zStride] = c_netherbrick_slab end
if data[vi - xStride] == c_air then data[vi - xStride] = c_netherbrick_slab end
if data[vi + xStride] == c_air then data[vi + xStride] = c_netherbrick_slab end
end
-- Barred windows
if room_seed % 7 < 5 and room_max.x - room_min.x >= 4 and room_max.z - room_min.z >= 4
and window_y >= minEdge.y and window_y + 1 <= maxEdge.y
and room_min.x > minEdge.x and room_max.x < maxEdge.x
and room_min.z > minEdge.z and room_max.z < maxEdge.z then
--data[area:indexp(roomInfo)] = minetest.get_content_id("default:mese_post_light") -- debug
-- Until whisper glass is added, every window will be made of netherbrick fence (rather
-- than material depending on room_seed)
local window_node = c_netherfence
local vi_min = area:index(room_min.x - 1, window_y, roomInfo.z)
local vi_max = area:index(room_max.x + 1, window_y, roomInfo.z)
local locations = {-zStride, zStride, -zStride + yStride, zStride + yStride}
for _, offset in ipairs(locations) do
if data[vi_min + offset] == c_netherbrick then data[vi_min + offset] = window_node end
if data[vi_max + offset] == c_netherbrick then data[vi_max + offset] = window_node end
end
vi_min = area:index(roomInfo.x, window_y, room_min.z - 1)
vi_max = area:index(roomInfo.x, window_y, room_max.z + 1)
locations = {-xStride, xStride, -xStride + yStride, xStride + yStride}
for _, offset in ipairs(locations) do
if data[vi_min + offset] == c_netherbrick then data[vi_min + offset] = window_node end
if data[vi_max + offset] == c_netherbrick then data[vi_max + offset] = window_node end
end
end
-- Weeds on the floor once Nether weeds are added
end
end
end
-- On-generated function
minetest.register_on_generated(function(minp, maxp, seed)
if minp.y > NETHER_DEPTH then
local function on_generated(minp, maxp, seed)
if minp.y > NETHER_CEILING or maxp.y < NETHER_FLOOR then
return
end
local x1 = maxp.x
local y1 = maxp.y
local z1 = maxp.z
local x0 = minp.x
local y0 = minp.y
local z0 = minp.z
local vm, emin, emax = minetest.get_mapgen_object("voxelmanip")
local area = VoxelArea:new{MinEdge = emin, MaxEdge = emax}
local vm, emerge_min, emerge_max = minetest.get_mapgen_object("voxelmanip")
local area = VoxelArea:new{MinEdge=emerge_min, MaxEdge=emerge_max}
local data = vm:get_data(dbuf)
local x11 = emax.x -- Limits of mapchunk plus mapblock shell
local y11 = emax.y
local z11 = emax.z
local x00 = emin.x
local y00 = emin.y
local z00 = emin.z
local x0, y0, z0 = minp.x, math_max(minp.y, NETHER_FLOOR), minp.z
local x1, y1, z1 = maxp.x, math_min(maxp.y, NETHER_CEILING), maxp.z
local ystride = x1 - x0 + 1
local zstride = ystride * ystride
local chulens = {x = ystride, y = ystride, z = ystride}
local minposxyz = {x = x0, y = y0, z = z0}
local yCaveStride = x1 - x0 + 1
local zCaveStride = yCaveStride * yCaveStride
local chulens = {x = yCaveStride, y = yCaveStride, z = yCaveStride}
nobj_cave = nobj_cave or minetest.get_perlin_map(np_cave, chulens)
local nvals_cave = nobj_cave:get3dMap_flat(minposxyz, nbuf_cave)
local nvals_cave = nobj_cave:get3dMap_flat(minp, nbuf_cave)
for y = y00, y11 do -- Y loop first to minimise tcave calculations
local tcave
local in_chunk_y = false
if y >= y0 and y <= y1 then
if y > yblmax then
tcave = TCAVE + ((y - yblmax) / BLEND) ^ 2
else
tcave = TCAVE
end
in_chunk_y = true
end
for z = z00, z11 do
local vi = area:index(x00, y, z) -- Initial voxelmanip index
local ni
local in_chunk_yz = in_chunk_y and z >= z0 and z <= z1
local dungeonRooms = build_dungeon_room_list(data, area)
for x = x00, x11 do
if in_chunk_yz and x == x0 then
-- Initial noisemap index
ni = (z - z0) * zstride + (y - y0) * ystride + 1
end
local in_chunk_yzx = in_chunk_yz and x >= x0 and x <= x1 -- In mapchunk
for y = y0, y1 do -- Y loop first to minimise tcave calculations
local tcave = TCAVE
if y > yblmax then tcave = TCAVE + ((y - yblmax) / BLEND) ^ 2 end
if y < yblmin then tcave = TCAVE + ((yblmin - y) / BLEND) ^ 2 end
for z = z0, z1 do
local vi = area:index(x0, y, z) -- Initial voxelmanip index
local ni = (z - z0) * zCaveStride + (y - y0) * yCaveStride + 1
for x = x0, x1 do
local id = data[vi] -- Existing node
-- Cave air, cave liquids and dungeons are overgenerated,
-- convert these throughout mapchunk plus shell
if id == c_air or -- Air and liquids to air
id == c_lava_source or
id == c_lava_flowing or
id == c_water_source or
id == c_water_flowing then
if nvals_cave[ni] > tcave then
data[vi] = c_air
-- Dungeons are preserved so we don't need
-- to check for cavern in the shell
elseif id == c_cobble or -- Dungeons (preserved) to netherbrick
id == c_mossycobble or
id == c_stair_cobble then
data[vi] = c_netherbrick
end
if in_chunk_yzx then -- In mapchunk
if nvals_cave[ni] > tcave then -- Only excavate cavern in mapchunk
data[vi] = c_air
elseif id == c_mese then -- Mese block to lava
data[vi] = c_lava_source
elseif id == c_stone_with_gold or -- Precious ores to glowstone
id == c_stone_with_mese or
id == c_stone_with_diamond then
data[vi] = c_glowstone
elseif id == c_gravel or -- Blob ore to nethersand
id == c_dirt or
id == c_sand then
data[vi] = c_nethersand
else -- All else to netherstone
data[vi] = c_netherrack
end
ni = ni + 1 -- Only increment noise index in mapchunk
elseif id == c_air or id == c_native_mapgen then
data[vi] = c_netherrack -- excavate_dungeons() will mostly reverse this inside dungeons
end
ni = ni + 1
vi = vi + 1
end
end
end
-- any air from the native mapgen has been replaced by netherrack, but we
-- don't want netherrack inside dungeons, so fill known dungeon rooms with air.
excavate_dungeons(data, area, dungeonRooms)
decorate_dungeons(data, area, dungeonRooms)
vm:set_data(data)
vm:set_lighting({day = 0, night = 0})
-- avoid generating decorations on the underside of the bottom of the nether
if minp.y > NETHER_FLOOR and maxp.y < NETHER_CEILING then minetest.generate_decorations(vm) end
minetest.generate_ores(vm)
vm:set_lighting({day = 0, night = 0}, minp, maxp)
vm:calc_lighting()
vm:update_liquids()
vm:write_to_map()
end)
end
-- use knowledge of the nether mapgen algorithm to return a suitable ground level for placing a portal.
@ -200,7 +469,7 @@ function nether.find_nether_ground_y(target_x, target_z, start_y)
local nobj_cave_point = minetest.get_perlin(np_cave)
local air = 0 -- Consecutive air nodes found
for y = start_y, start_y - 4096, -1 do
for y = start_y, math_max(NETHER_FLOOR + BLEND, start_y - 4096), -1 do
local nval_cave = nobj_cave_point:get3d({x = target_x, y = y, z = target_z})
if nval_cave > TCAVE then -- Cavern
@ -221,5 +490,11 @@ function nether.find_nether_ground_y(target_x, target_z, start_y)
end
end
return start_y -- Fallback
return math_max(start_y, NETHER_FLOOR + BLEND) -- Fallback
end
-- We don't need to be gen-notified of temples because only dungeons will be generated
-- if a biome defines the dungeon nodes
minetest.set_gen_notify({dungeon = true})
minetest.register_on_generated(on_generated)

138
mapgen_decorations.lua Normal file
View File

@ -0,0 +1,138 @@
--[[
Register decorations for Nether mapgen
Copyright (C) 2020 Treer
Permission to use, copy, modify, and/or distribute this software for
any purpose with or without fee is hereby granted, provided that the
above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
SOFTWARE.
]]--
-- Lava is unreliable in the old Nether mapgen because it removes lava
-- from the overdraw areas, so any decorations involving lava will often
-- have the lava missing depending on whether nearby chunks were already
-- emerged or not before the decoration was placed.
local allow_lava_decorations = nether.useBiomes
local _ = {name = "air", prob = 0}
local A = {name = "air", prob = 255, force_place = true}
local G = {name = "nether:glowstone", prob = 255, force_place = true}
local N = {name = "nether:rack", prob = 255}
local S = {name = "nether:sand", prob = 255, force_place = true}
local L = {name = "default:lava_source", prob = 255, force_place = true}
-- =================
-- Stalactites
-- =================
local schematic_GlowstoneStalactite = {
size = {x = 5, y = 10, z = 5},
data = {
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, N, G, N, _,
_, N, N, N, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, G, _, _,
_, _, G, _, _,
_, G, G, G, _,
N, G, G, G, N,
N, N, G, N, N,
_, _, N, _, _, -- ypos 0, prob 25% (64/256)
_, _, G, _, _, -- ypos 1, prob 37% (96/256)
_, _, G, _, _, -- ypos 2, prob 100%
_, _, G, _, _, -- ypos 3, prob 100%
_, _, G, G, _, -- ypos 4, prob 50% (128/256) to make half of stalactites asymmetric
_, G, G, G, _, -- ypos 5, prob 75% (192/256)
_, G, G, G, _, -- ypos 6, prob 75% (192/256)
_, G, G, G, _, -- ypos 7, prob 100%
G, G, G, G, G, -- ypos 8, prob 100%
N, G, G, G, N, -- ypos 9, prob 75% (192/256)
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, G, _, _,
_, _, G, _, _,
_, _, G, _, _,
_, G, G, G, _,
N, G, G, G, N,
N, N, G, N, N,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, _, _, _, _,
_, N, G, N, _,
_, N, N, N, _
},
-- Y-slice probabilities do not function correctly for ceiling schematic
-- decorations because they are inverted, so ypos numbers have been inverted
-- to match, and a larger offset in place_offset_y should be used (e.g. -3).
yslice_prob = {
{ypos = 9, prob = 192},
{ypos = 6, prob = 192},
{ypos = 5, prob = 192},
{ypos = 4, prob = 128},
{ypos = 1, prob = 96},
{ypos = 0, prob = 64}
}
}
minetest.register_decoration({
name = "Glowstone stalactite",
deco_type = "schematic",
place_on = "nether:rack",
sidelen = 80,
fill_ratio = 0.0004,
biomes = {"nether_caverns"},
y_max = nether.DEPTH_CEILING, -- keep compatibility with mapgen_nobiomes.lua
y_min = nether.DEPTH_FLOOR,
schematic = schematic_GlowstoneStalactite,
flags = "place_center_x,place_center_z,force_placement,all_ceilings",
place_offset_y=-3
})
minetest.register_decoration({
name = "Netherrack stalactite",
deco_type = "schematic",
place_on = "nether:rack",
sidelen = 80,
fill_ratio = 0.0007,
biomes = {"nether_caverns"},
y_max = nether.DEPTH_CEILING, -- keep compatibility with mapgen_nobiomes.lua
y_min = nether.DEPTH_FLOOR,
schematic = schematic_GlowstoneStalactite,
replacements = {["nether:glowstone"] = "nether:rack"},
flags = "place_center_x,place_center_z,all_ceilings",
place_offset_y=-3
})

230
mapgen_nobiomes.lua Normal file
View File

@ -0,0 +1,230 @@
--[[
Nether mod for minetest
Copyright (C) 2013 PilzAdam
Permission to use, copy, modify, and/or distribute this software for
any purpose with or without fee is hereby granted, provided that the
above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
SOFTWARE.
]]--
-- Parameters
local NETHER_CEILING = nether.DEPTH_CEILING
local NETHER_FLOOR = nether.DEPTH_FLOOR
local TCAVE = 0.6
local BLEND = 128
-- 3D noise
local np_cave = {
offset = 0,
scale = 1,
spread = {x = 384, y = 128, z = 384}, -- squashed 3:1
seed = 59033,
octaves = 5,
persist = 0.7,
lacunarity = 2.0,
--flags = ""
}
-- Stuff
local yblmin = NETHER_FLOOR + BLEND * 2
local yblmax = NETHER_CEILING - BLEND * 2
-- Mapgen
dofile(nether.path .. "/mapgen_decorations.lua")
-- Initialize noise object, localise noise and data buffers
local nobj_cave = nil
local nbuf_cave = nil
local dbuf = nil
-- Content ids
local c_air = minetest.get_content_id("air")
--local c_stone_with_coal = minetest.get_content_id("default:stone_with_coal")
--local c_stone_with_iron = minetest.get_content_id("default:stone_with_iron")
local c_stone_with_mese = minetest.get_content_id("default:stone_with_mese")
local c_stone_with_diamond = minetest.get_content_id("default:stone_with_diamond")
local c_stone_with_gold = minetest.get_content_id("default:stone_with_gold")
--local c_stone_with_copper = minetest.get_content_id("default:stone_with_copper")
local c_mese = minetest.get_content_id("default:mese")
local c_gravel = minetest.get_content_id("default:gravel")
local c_dirt = minetest.get_content_id("default:dirt")
local c_sand = minetest.get_content_id("default:sand")
local c_cobble = minetest.get_content_id("default:cobble")
local c_mossycobble = minetest.get_content_id("default:mossycobble")
local c_stair_cobble = minetest.get_content_id("stairs:stair_cobble")
local c_lava_source = minetest.get_content_id("default:lava_source")
local c_lava_flowing = minetest.get_content_id("default:lava_flowing")
local c_water_source = minetest.get_content_id("default:water_source")
local c_water_flowing = minetest.get_content_id("default:water_flowing")
local c_glowstone = minetest.get_content_id("nether:glowstone")
local c_nethersand = minetest.get_content_id("nether:sand")
local c_netherbrick = minetest.get_content_id("nether:brick")
local c_netherrack = minetest.get_content_id("nether:rack")
-- On-generated function
minetest.register_on_generated(function(minp, maxp, seed)
if minp.y > NETHER_CEILING or maxp.y < NETHER_FLOOR then
return
end
local x1 = maxp.x
local y1 = math.min(maxp.y, NETHER_CEILING)
local z1 = maxp.z
local x0 = minp.x
local y0 = math.max(minp.y, NETHER_FLOOR)
local z0 = minp.z
local vm, emin, emax = minetest.get_mapgen_object("voxelmanip")
local area = VoxelArea:new{MinEdge = emin, MaxEdge = emax}
local data = vm:get_data(dbuf)
local x11 = emax.x -- Limits of mapchunk plus mapblock shell
local y11 = emax.y
local z11 = emax.z
local x00 = emin.x
local y00 = emin.y
local z00 = emin.z
local ystride = x1 - x0 + 1
local zstride = ystride * ystride
local chulens = {x = ystride, y = ystride, z = ystride}
local minposxyz = {x = x0, y = y0, z = z0}
nobj_cave = nobj_cave or minetest.get_perlin_map(np_cave, chulens)
local nvals_cave = nobj_cave:get3dMap_flat(minposxyz, nbuf_cave)
for y = y00, y11 do -- Y loop first to minimise tcave calculations
local tcave
local in_chunk_y = false
if y >= y0 and y <= y1 then
tcave = TCAVE
if y > yblmax then tcave = TCAVE + ((y - yblmax) / BLEND) ^ 2 end
if y < yblmin then tcave = TCAVE + ((yblmin - y) / BLEND) ^ 2 end
in_chunk_y = true
end
for z = z00, z11 do
local vi = area:index(x00, y, z) -- Initial voxelmanip index
local ni
local in_chunk_yz = in_chunk_y and z >= z0 and z <= z1
for x = x00, x11 do
if in_chunk_yz and x == x0 then
-- Initial noisemap index
ni = (z - z0) * zstride + (y - y0) * ystride + 1
end
local in_chunk_yzx = in_chunk_yz and x >= x0 and x <= x1 -- In mapchunk
local id = data[vi] -- Existing node
-- Cave air, cave liquids and dungeons are overgenerated,
-- convert these throughout mapchunk plus shell
if id == c_air or -- Air and liquids to air
id == c_lava_source or
id == c_lava_flowing or
id == c_water_source or
id == c_water_flowing then
data[vi] = c_air
-- Dungeons are preserved so we don't need
-- to check for cavern in the shell
elseif id == c_cobble or -- Dungeons (preserved) to netherbrick
id == c_mossycobble or
id == c_stair_cobble then
data[vi] = c_netherbrick
end
if in_chunk_yzx then -- In mapchunk
if nvals_cave[ni] > tcave then -- Only excavate cavern in mapchunk
data[vi] = c_air
elseif id == c_mese then -- Mese block to lava
data[vi] = c_lava_source
elseif id == c_stone_with_gold or -- Precious ores to glowstone
id == c_stone_with_mese or
id == c_stone_with_diamond then
data[vi] = c_glowstone
elseif id == c_gravel or -- Blob ore to nethersand
id == c_dirt or
id == c_sand then
data[vi] = c_nethersand
else -- All else to netherstone
data[vi] = c_netherrack
end
ni = ni + 1 -- Only increment noise index in mapchunk
end
vi = vi + 1
end
end
end
vm:set_data(data)
-- avoid generating decorations on the underside of the bottom of the nether
if minp.y > NETHER_FLOOR and maxp.y < NETHER_CEILING then minetest.generate_decorations(vm) end
vm:set_lighting({day = 0, night = 0}, minp, maxp)
vm:calc_lighting()
vm:update_liquids()
vm:write_to_map()
end)
-- use knowledge of the nether mapgen algorithm to return a suitable ground level for placing a portal.
function nether.find_nether_ground_y(target_x, target_z, start_y)
local nobj_cave_point = minetest.get_perlin(np_cave)
local air = 0 -- Consecutive air nodes found
for y = start_y, start_y - 4096, -1 do
local nval_cave = nobj_cave_point:get3d({x = target_x, y = y, z = target_z})
if nval_cave > TCAVE then -- Cavern
air = air + 1
else -- Not cavern, check if 4 nodes of space above
if air >= 4 then
-- Check volume for non-natural nodes
local minp = {x = target_x - 1, y = y , z = target_z - 2}
local maxp = {x = target_x + 2, y = y + 4, z = target_z + 2}
if nether.volume_is_natural(minp, maxp) then
return y + 1
else -- Restart search a little lower
nether.find_nether_ground_y(target_x, target_z, y - 16)
end
else -- Not enough space, reset air to zero
air = 0
end
end
end
return start_y -- Fallback
end

View File

@ -21,7 +21,7 @@
local S = nether.get_translator
-- Portal/wormhole node
-- Portal/wormhole nodes
nether.register_wormhole_node("nether:portal", {
description = S("Nether Portal"),
@ -37,6 +37,33 @@ nether.register_wormhole_node("nether:portal", {
}
})
local portal_animation2 = {
name = "nether_portal_alt.png",
animation = {
type = "vertical_frames",
aspect_w = 16,
aspect_h = 16,
length = 0.5,
},
}
nether.register_wormhole_node("nether:portal_alt", {
description = S("Portal"),
tiles = {
"nether_transparent.png",
"nether_transparent.png",
"nether_transparent.png",
"nether_transparent.png",
portal_animation2,
portal_animation2
},
post_effect_color = {
-- hopefully blue enough to work with blue portals, and green enough to
-- work with cyan portals.
a = 120, r = 0, g = 128, b = 188
}
})
-- Nether nodes

View File

@ -113,9 +113,28 @@ metadata).
]]
local __ = {name = "air", prob = 0}
local AA = {name = "air", prob = 255, force_place = true}
local OO = {name = "default:obsidian", prob = 255, force_place = true}
local facedir_up, facedir_north, facedir_south, facedir_east, facedir_west, facedir_down = 0, 4, 8, 12, 16, 20
local __ = {name = "air", prob = 0}
local AA = {name = "air", prob = 255, force_place = true}
local ON = {name = "default:obsidian", facedir = facedir_north + 0, prob = 255, force_place = true}
local ON2 = {name = "default:obsidian", facedir = facedir_north + 1, prob = 255, force_place = true}
local ON3 = {name = "default:obsidian", facedir = facedir_north + 2, prob = 255, force_place = true}
local ON4 = {name = "default:obsidian", facedir = facedir_north + 3, prob = 255, force_place = true}
local OS = {name = "default:obsidian", facedir = facedir_south, prob = 255, force_place = true}
local OE = {name = "default:obsidian", facedir = facedir_east, prob = 255, force_place = true}
local OW = {name = "default:obsidian", facedir = facedir_west, prob = 255, force_place = true}
local OU = {name = "default:obsidian", facedir = facedir_up + 0, prob = 255, force_place = true}
local OU2 = {name = "default:obsidian", facedir = facedir_up + 1, prob = 255, force_place = true}
local OU3 = {name = "default:obsidian", facedir = facedir_up + 2, prob = 255, force_place = true}
local OU4 = {name = "default:obsidian", facedir = facedir_up + 3, prob = 255, force_place = true}
local OD = {name = "default:obsidian", facedir = facedir_down, prob = 255, force_place = true}
-- facedirNodeList is a list of node references which should have their facedir value copied into
-- param2 before placing a schematic. The facedir values will only be copied when the portal's frame
-- node has a paramtype2 of "facedir" or "colorfacedir".
-- Having schematics provide this list avoids needing to check every node in the schematic volume.
local facedirNodeList = {ON, ON2, ON3, ON4, OS, OE, OW, OU, OU2, OU3, OU4, OD}
-- This object defines a portal's shape, segregating the shape logic code from portal behaviour code.
-- You can create a new "PortalShape" definition object which implements the same
@ -285,25 +304,26 @@ nether.PortalShape_Traditional = {
AA,AA,AA,AA,
AA,AA,AA,AA,
AA,AA,AA,AA,
OO,OO,OO,OO,
OO,AA,AA,OO,
OO,AA,AA,OO,
OO,AA,AA,OO,
OO,OO,OO,OO,
ON,OW,OE,ON2,
OU,AA,AA,OU,
OU,AA,AA,OU,
OU,AA,AA,OU,
ON4,OE,OW,ON3,
__,__,__,__,
AA,AA,AA,AA,
AA,AA,AA,AA,
AA,AA,AA,AA,
AA,AA,AA,AA,
__,__,__,__,
AA,AA,AA,AA,
AA,AA,AA,AA,
AA,AA,AA,AA,
AA,AA,AA,AA,
}
},
facedirNodes = facedirNodeList
}
} -- End of PortalShape_Traditional class
@ -449,7 +469,7 @@ nether.PortalShape_Circular = {
__,__,AA,AA,AA,__,__,
__,__,__,__,__,__,__,
__,__,__,__,__,__,__,
__,__,__,__,__,__,__,
__,AA,AA,AA,AA,AA,__,
__,AA,AA,AA,AA,AA,__,
@ -457,7 +477,7 @@ nether.PortalShape_Circular = {
__,AA,AA,AA,AA,AA,__,
__,AA,AA,AA,AA,AA,__,
__,__,__,__,__,__,__,
__,__,__,__,__,__,__,
__,AA,AA,AA,AA,AA,__,
AA,AA,AA,AA,AA,AA,AA,
@ -465,15 +485,15 @@ nether.PortalShape_Circular = {
AA,AA,AA,AA,AA,AA,AA,
__,AA,AA,AA,AA,AA,__,
__,__,AA,AA,AA,__,__,
__,__,OO,OO,OO,__,__,
__,OO,AA,AA,AA,OO,__,
OO,AA,AA,AA,AA,AA,OO,
OO,AA,AA,AA,AA,AA,OO,
OO,AA,AA,AA,AA,AA,OO,
__,OO,AA,AA,AA,OO,__,
__,__,OO,OO,OO,__,__,
__,__,OW,OW,OW,__,__,
__,ON,AA,AA,AA,ON2,__,
OU,AA,AA,AA,AA,AA,OD,
OU,AA,AA,AA,AA,AA,OD,
OU,AA,AA,AA,AA,AA,OD,
__,ON4,AA,AA,AA,ON3,__,
__,__,OE,OE,OE,__,__,
__,__,__,__,__,__,__,
__,AA,AA,AA,AA,AA,__,
AA,AA,AA,AA,AA,AA,AA,
@ -481,7 +501,7 @@ nether.PortalShape_Circular = {
AA,AA,AA,AA,AA,AA,AA,
__,AA,AA,AA,AA,AA,__,
__,__,AA,AA,AA,__,__,
__,__,__,__,__,__,__,
__,AA,AA,AA,AA,AA,__,
__,AA,AA,AA,AA,AA,__,
@ -497,7 +517,8 @@ nether.PortalShape_Circular = {
__,__,AA,AA,AA,__,__,
__,__,__,__,__,__,__,
__,__,__,__,__,__,__,
}
},
facedirNodes = facedirNodeList
}
} -- End of PortalShape_Circular class
@ -597,35 +618,36 @@ nether.PortalShape_Platform = {
size = {x = 5, y = 5, z = 5},
data = { -- note that data is upside down
__,__,__,__,__,
OO,OO,OO,OO,OO,
OU4,OW,OW,OW,OU3,
__,AA,AA,AA,__,
__,AA,AA,AA,__,
__,__,__,__,__,
__,OO,OO,OO,__,
OO,AA,AA,AA,OO,
__,OU4,OW,OU3,__,
ON,AA,AA,AA,OS,
AA,AA,AA,AA,AA,
AA,AA,AA,AA,AA,
__,AA,AA,AA,__,
__,OO,OO,OO,__,
OO,AA,AA,AA,OO,
__,ON,OD,OS,__,
ON,AA,AA,AA,OS,
AA,AA,AA,AA,AA,
AA,AA,AA,AA,AA,
__,AA,AA,AA,__,
__,OO,OO,OO,__,
OO,AA,AA,AA,OO,
__,OU,OE,OU2,__,
ON,AA,AA,AA,OS,
AA,AA,AA,AA,AA,
AA,AA,AA,AA,AA,
__,AA,AA,AA,__,
__,__,__,__,__,
OO,OO,OO,OO,OO,
OU,OE,OE,OE,OU2,
__,AA,AA,AA,__,
__,AA,AA,AA,__,
__,__,__,__,__,
}
},
facedirNodes = facedirNodeList
}
} -- End of PortalShape_Platform class
@ -1137,8 +1159,29 @@ local function is_within_portal_frame(portal_definition, pos)
end
-- sets param2 values in the schematic to match facedir values, or 0 if the portalframe-nodedef doesn't use facedir
local function set_schematic_param2(schematic_table, frame_node_name, frame_node_color)
local paramtype2 = minetest.registered_nodes[frame_node_name].paramtype2
local isFacedir = paramtype2 == "facedir" or paramtype2 == "colorfacedir"
if schematic_table.facedirNodes ~= nil then
for _, node in ipairs(schematic_table.facedirNodes) do
if isFacedir and node.facedir ~= nil then
-- frame_node_color can be nil
local colorBits = (frame_node_color or math.floor((node.param2 or 0) / 32)) * 32
node.param2 = node.facedir + colorBits
else
node.param2 = 0
end
end
end
end
local function build_portal(portal_definition, anchorPos, orientation, destination_wormholePos)
set_schematic_param2(portal_definition.shape.schematic, portal_definition.frame_node_name, portal_definition.frame_node_color)
minetest.place_schematic(
portal_definition.shape.get_schematicPos_from_anchorPos(anchorPos, orientation),
portal_definition.shape.schematic,
@ -1178,8 +1221,8 @@ local function remote_portal_checkup(elapsed, portal_definition, anchorPos, orie
local wormholePos = portal_definition.shape.get_wormholePos_from_anchorPos(anchorPos, orientation)
local wormhole_node = minetest.get_node_or_nil(wormholePos)
local portalFound, portalLit = false, false
if wormhole_node ~= nil and wormhole_node.name == portal_definition.wormhole_node_name then
local portalFound, portalLit = false, false
if wormhole_node ~= nil and wormhole_node.name == portal_definition.wormhole_node_name then
-- a wormhole node was there, but check the whole frame is intact
portalFound, portalLit = is_portal_at_anchorPos(portal_definition, anchorPos, orientation, false)
end
@ -1864,6 +1907,10 @@ function test_portaldef_is_valid(portal_definition)
assert(portal_definition.wormhole_node_color >= 0 and portal_definition.wormhole_node_color < 8, "portaldef.wormhole_node_color must be between 0 and 7 (inclusive)")
assert(portal_definition.is_within_realm ~= nil, "portaldef.is_within_realm() must be implemented")
assert(portal_definition.find_realm_anchorPos ~= nil, "portaldef.find_realm_anchorPos() must be implemented")
if portal_definition.frame_node_color ~= nil then
assert(portal_definition.frame_node_color >= 0 and portal_definition.frame_node_color < 8, "portal_definition.frame_node_color must be between 0 and 7 (inclusive)")
end
-- todo
return result
@ -1916,7 +1963,7 @@ local wormhole_nodedef_default = {
type = "vertical_frames",
aspect_w = 16,
aspect_h = 16,
length = 0.5,
length = 0.9,
},
},
{
@ -1925,7 +1972,7 @@ local wormhole_nodedef_default = {
type = "vertical_frames",
aspect_w = 16,
aspect_h = 16,
length = 0.5,
length = 0.9,
},
},
},

View File

@ -115,6 +115,12 @@ Used by `nether.register_portal`.
-- Required. For best results, have your portal constructed of a
-- material nobody else is using.
frame_node_color = 0,
-- Optional.
-- A value from 0 to 7. Only used if the frame node's paramtype2 is
-- "colorfacedir", in which case this color will be used when a remote
-- portal is created.
shape = nether.PortalShape_Traditional,
-- Optional.
-- Shapes available are:
@ -127,6 +133,9 @@ Used by `nether.register_portal`.
-- Optional. Allows a custom wormhole node to be specified.
-- Useful if you want the portals to have a different post_effect_color
-- or texture.
-- The Nether mod provides:
-- "nether:portal" (default)
-- "nether:portal_alt"
wormhole_node_color = 0,
-- Optional. Defaults to 0/magenta.
@ -208,6 +217,7 @@ Used by `nether.register_portal`.
-- If the location of an existing portal is returned then include the
-- orientation, otherwise the existing portal could be overwritten by
-- a new one with the orientation of the surface portal.
-- Return nil to prevent the portal from igniting.
find_surface_anchorPos = function(realm_anchorPos),
-- Optional. If you don't implement this then a position near the
@ -222,6 +232,7 @@ Used by `nether.register_portal`.
-- If the location of an existing portal is returned then include the
-- orientation, otherwise the existing portal could be overwritten by
-- a new one with the orientation of the realm portal.
-- Return nil to prevent the portal from igniting.
on_run_wormhole = function(portalDef, anochorPos, orientation),
-- invoked once per second per portal

View File

@ -116,6 +116,7 @@ if minetest.settings:get_bool("nether_enable_portal_example_surfacetravel", ENAB
nether.register_portal("surface_portal", {
shape = nether.PortalShape_Circular,
frame_node_name = "default:tinblock",
wormhole_node_name = "nether:portal_alt",
wormhole_node_color = 4, -- 4 is cyan
title = S("Surface Portal"),
book_of_portals_pagetext = S([[Requiring 16 blocks of tin and constructed in a circular fashion, a finished frame is seven blocks wide, seven blocks high, and stands vertically like a doorway.

View File

@ -16,4 +16,10 @@ nether_realm_enabled (Enable Nether realm & portal) bool true
nether_enable_portal_example_floatlands (Enable example portal: Floatlands) bool false
# Enables the Surface-travel portal api code example
nether_enable_portal_example_surfacetravel (Enable example portal: Surface-travel) bool false
nether_enable_portal_example_surfacetravel (Enable example portal: Surface-travel) bool false
[Nether depth]
#The depth where the Nether begins / the Nether ceiling
nether_depth_ymax (Upper limit of Nether) int -5000 -30000 32767
#The lower limit of the Nether must be at least 1000 lower than the upper limit, and more than 3000 lower is recommended.
nether_depth_ymin (Lower limit of Nether) int -11000 -32768 30000

Binary file not shown.

Before

Width:  |  Height:  |  Size: 282 B

After

Width:  |  Height:  |  Size: 1.5 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 282 B