Update locale files

This commit is contained in:
Wuzzy 2021-04-04 16:22:51 +02:00
parent cb1e33485e
commit 6f8a575786
2 changed files with 39 additions and 40 deletions

View File

@ -1,36 +1,44 @@
# textdomain: schemedit
<world path>=<Weltpfad>
<name>=<Name>
Insufficient privileges! You need the “@1” privilege to use this.=Unzureichende Privilegien! Sie benötigen das „@1“-Privileg, um dies benutzen zu können.
Probability: @1=Wahrscheinlichkeit: @1
Not Set=Nicht gesetzt
Force placement=Platzierung erzwingen
Import schematic=Schematic importieren
Main=Grundeinstellungen
Hide border=Rand verbergen
Show border=Rand anzeigen
Position: @1=Position: @1
Owner: @1=Eigentümer: @1
Size: @1=Größe: @1
Schematic name: @1=Schematic-Name: @1
Size: @1=Größe: @1
Schematic name:=Schematic-Name:
OK=OK
Save schematic name=Schematic-Name speichern
Export schematic=Schematic exportieren
Import schematic=Schematic importieren
Imported schematic from @1=Schematic von @1 importiert
Failed to import schematic from @1=Schematic konnte nicht von @1 importiert werden
The schematic will be exported as a .mts file and stored in@n@1=Das Schematic wird als .mts-Datei gespeichert in:@n@1
Export/import path:@n@1=Export-/Importpfad:@n@1
<name>=<Name>
Air to voids=Luft zu Lücken
Voids to air=Lücken zu Luft
Turn all air nodes into schematic void nodes=Alle Luft-Nodes zu Schematic-Lücken umwandeln
Turn all schematic void nodes into air nodes=Alle Schematic-Lücken zu Luft-Nodes umwandeln
X size:=X-Größe:
Y size:=Y-Größe:
Z size:=Z-Größe:
Save size=Größe speichern
Help=Hilfe
Exported schematic to @1=Schematic nach @1 exportiert
Failed to export schematic to @1=Schematic konnte nicht nach @1 exportiert werden
Imported schematic from @1=Schematic von @1 importiert
Failed to import schematic from @1=Schematic konnte nicht von @1 importiert werden
Y Slices=Y-Scheiben
Y @= @1; Probability @= @2=Y @= @1; Wahrscheinlichkeit @= @2
Done=Fertig
Y position (max. @1):=Y-Position (max. @1):
Probability (0-255):=Wahrscheinlichkeit (0-255):
+ Add slice=+ Neue Scheibe
+/- Edit slice=+/- Scheibe bearbeiten
- Remove slice=- Scheibe entfernen
Add slice=Neue Scheibe
Remove slice=Scheibe entfernen
Edit slice=Scheibe anpassen
Schematic Node Probability Tool=Schematic-Node-Wahrscheinlichkeitswerkzeug
Probability (0-255)=Wahrscheinlichkeit
Cancel=Abbrechen
@ -38,11 +46,11 @@ Apply=Anwenden
Probability that the node will be placed=Wahrscheinlichkeit, dass der Node platizert wird
If enabled, the node will replace nodes other than air and ignore=Wenn aktiviert, wird der Node alle Nodes außer Luft und Ignorieren ersetzen
Allows you to access schemedit nodes not owned by you=Damit können Sie auf Schemedit-Nodes, die ihnen nicht gehören, zugreifen
Importing a schematic will load a schematic from the world directory, place it in front of the schematic creator and sets probability and force-place data accordingly.=Das Importieren eines Schematics wird eine Schematicdatei aus dem Weltverzeichnis laden, sie vor dem Schematic-Macher platzieren und die Wahrscheinlichkeits- und Zwangsplatzierungsdaten entsprechend setzen.
Schematic Creator=Schematic-Macher
The schematic creator is used to save a region of the world into a schematic file (.mts).=Der Schematic-Macher wird benutzt, um eine Region der Welt in eine Schematic-Datei (.mts) zu speichern.
To get started, place the block facing directly in front of any bottom left corner of the structure you want to save. This block can only be accessed by the placer or by anyone with the “schematic_override” privilege.=Um anzufangen, platzieren Sie den Block direkt vor einer beliebigen unteren linken Ecke des Gebäudes, das Sie speichern möchten. Dieser Block kann nur vom Platzierer oder von Spielern mit dem „schematic_override“-Privileg benutzt werden.
To save a region, use the block, enter the size and a schematic name and hit “Export schematic”. The file will always be saved in the world directory. Note you can use this name in the /placeschem command to place the schematic again.=Um eine Region zu speichern, benutzen Sie den Block, geben Sie die Größe und einen Schematic-Namen ein und klicken Sie auf „Schematic exportieren“. Die Datei wird immer im Weltverzeichnis gespeichert. Beachten Sie, dass Sie diesen Namen im „/placeschem“-Befehl benutzen können, um das Schematic erneut zu platzieren.
Importing a schematic will load a schematic from the world directory, place it in front of the schematic creator and sets probability and force-place data accordingly.=Das Importieren eines Schematics wird eine Schematicdatei aus dem Weltverzeichnis laden, sie vor dem Schematic-Macher platzieren und die Wahrscheinlichkeits- und Zwangsplatzierungsdaten entsprechend setzen.
The other features of the schematic creator are optional and are used to allow to add randomness and fine-tuning.=Die anderen Funktionen des Schematic-Machers sind optional und werden für Zufälligkeit und Feinjustierungen benutzt.
Y slices are used to remove entire slices based on chance. For each slice of the schematic region along the Y axis, you can specify that it occurs only with a certain chance. In the Y slice tab, you have to specify the Y slice height (0 @= bottom) and a probability from 0 to 255 (255 is for 100%). By default, all Y slices occur always.=Y-Scheiben werden benutzt, um ganze Scheiben mit einer gewissen Wahrscheinlichkeit auszulassen. Für jede Scheibe der Schematic-Region entlang der Y-Achse können Sie festlegen, dass sie nur mit einer gewissen Wahrscheinlichkeit auftritt. In der Registerkarte „Y-Scheiben“ müssen Sie die Höhe der Y-Scheibe festlegen (0 @= Boden) sowie eine Wahrscheinlichkeit zwischen 0 und 255 (255 steht für 100%). Standardmäßig treten alle Y-Scheiben immer auf.
With a schematic node probability tool, you can set a probability for each node and enable them to overwrite all nodes when placed as schematic. This tool must be used prior to the file export.=Mit einem Schematic-Node-Wahrscheinlichkeitswerkzeug können Sie die Wahrscheinlichkeit für jeden Node setzen und sie dazu aktivieren, alle Nodes zu ersetzen, wenn sie als Schematic platziert werden. Dieses Werkzeug muss vor dem Dateiexport benutzt werden.
@ -66,16 +74,6 @@ Place schematic at the position specified or the current player position (loaded
<schematic name>[.mts] [<x> <y> <z>]=<Schematic-Name>[.mts] [<x> <y> <z>]
No schematic file specified.=Keinen Schematic-Namen angegeben.
Schematic file could not be loaded!=Schematic-Datei konnte nicht geladen werden!
Main=Grundeinstellungen
X size:=X-Größe:
Y size:=Y-Größe:
Z size:=Z-Größe:
Insufficient privileges! You need the “@1” privilege to use this.=Unzureichende Privilegien! Sie benötigen das „@1“-Privileg, um dies benutzen zu können.
Convert .mts schematic file to .lua file (loaded from @1)=„.mts“-Schematicdatei zu „.lua“-Datei konvertieren (geladen von @1)
<schematic name>[.mts] [comments]=<Schematic-Name>[.mts] [comments]
Failed.=Fehlgeschlagen.
Air to voids=Luft zu Lücken
Voids to air=Lücken zu Luft
Turn all air nodes into schematic void nodes=Alle Luft-Nodes zu Schematic-Lücken umwandeln
Turn all schematic void nodes into air nodes=Alle Schematic-Lücken zu Luft-Nodes umwandeln
Failed!=Fehlgeschlagen!

View File

@ -1,34 +1,44 @@
# textdomain: schemedit
<world path>=
<name>=
Not Set=
Insufficient privileges! You need the “@1” privilege to use this.=
Probability: @1=
Not Set=
Force placement=
Import schematic=
Main=
Hide border=
Show border=
Position: @1=
Owner: @1=
Size: @1=
Schematic name: @1=
Size: @1=
Schematic name:=
OK=
Save schematic name=
Export schematic=
Import schematic=
Imported schematic from @1=
Failed to import schematic from @1=
Export/import path:@n@1=
<name>=
Air to voids=
Voids to air=
Turn all air nodes into schematic void nodes=
Turn all schematic void nodes into air nodes=
X size:=
Y size:=
Z size:=
Save size=
Help=
Exported schematic to @1=
Failed to export schematic to @1=
Imported schematic from @1=
Failed to import schematic from @1=
Y Slices=
Y @= @1; Probability @= @2=
Done=
Y position (max. @1):=
Probability (0-255):=
+ Add slice=
+/- Edit slice=
Add slice=
Remove slice=
Edit slice=
Schematic Node Probability Tool=
Probability (0-255)=
Cancel=
@ -36,6 +46,7 @@ Apply=
Probability that the node will be placed=
If enabled, the node will replace nodes other than air and ignore=
Allows you to access schemedit nodes not owned by you=
Importing a schematic will load a schematic from the world directory, place it in front of the schematic creator and sets probability and force-place data accordingly.=
Schematic Creator=
The schematic creator is used to save a region of the world into a schematic file (.mts).=
To get started, place the block facing directly in front of any bottom left corner of the structure you want to save. This block can only be accessed by the placer or by anyone with the “schematic_override” privilege.=
@ -43,7 +54,6 @@ To save a region, use the block, enter the size and a schematic name and hit “
The other features of the schematic creator are optional and are used to allow to add randomness and fine-tuning.=
Y slices are used to remove entire slices based on chance. For each slice of the schematic region along the Y axis, you can specify that it occurs only with a certain chance. In the Y slice tab, you have to specify the Y slice height (0 @= bottom) and a probability from 0 to 255 (255 is for 100%). By default, all Y slices occur always.=
With a schematic node probability tool, you can set a probability for each node and enable them to overwrite all nodes when placed as schematic. This tool must be used prior to the file export.=
Importing a schematic will load a schematic from the world directory, place it in front of the schematic creator and sets probability and force-place data accordingly.=
(owned by @1)=
This is an advanced tool which only makes sense when used together with a schematic creator. It is used to finetune the way how nodes from a schematic are placed.=
It allows you to set two things:=
@ -64,15 +74,6 @@ Place schematic at the position specified or the current player position (loaded
<schematic name>[.mts] [<x> <y> <z>]=
No schematic file specified.=
Schematic file could not be loaded!=
Main=
X size:=
Y size:=
Z size:=
Insufficient privileges! You need the “@1” privilege to use this.=
Convert .mts schematic file to .lua file (loaded from @1)=
<schematic name>[.mts] [comments]=
Failed.=
Air to voids=
Voids to air=
Turn all air nodes into schematic void nodes=
Turn all schematic void nodes into air nodes=
Failed!=