forked from mtcontrib/unifieddyes
153 lines
9.2 KiB
Markdown
153 lines
9.2 KiB
Markdown
### API
|
|
|
|
This section details the Unified Dyes API and how to use it with your mods.
|
|
|
|
In your node definition, you must include a few things to interface with Unified Dyes. Here is an example:
|
|
|
|
```lua
|
|
minetest.register_node("mymod:colored_node", {
|
|
description = "My custom colored node",
|
|
tiles = { "mymod_custom_colored_node.png" },
|
|
paramtype = "light",
|
|
paramtype2 = "color",
|
|
palette = "unifieddyes_palette_extended.png",
|
|
groups = {snappy = 1, cracky = 2, ud_param2_colorable = 1}
|
|
on_construct = unifieddyes.on_construct,
|
|
})
|
|
```
|
|
|
|
`paramtype2` must be one of:
|
|
- "color": this is an 89-color or 256-color node
|
|
- "colorwallmounted": this is a 32-color node using "wallmounted" mode
|
|
- "colorfacedir": this node uses one of the "split" 89-color palettes.
|
|
|
|
`palette` must be set to match the `paramtype2` setting, and must be one of:
|
|
- "unifieddyes_palette.png"
|
|
- "unifieddyes_palette_extended.png"
|
|
- "unifieddyes_palette_colorwallmounted.png"
|
|
- or one of the "split" hues palettes (see below).
|
|
|
|
`groups`: If your node can be colored by punching it with dye, its groups entry must contain the key ud_param2_colorable = 1, among whatever else you'd normally put there. If the node is software-controlled, as might be the case for some mesecons-digilines aware node, then this group key should be omitted.
|
|
|
|
`on_construct`: see below.
|
|
|
|
#### Function calls
|
|
|
|
**`unifieddyes.fix_rotation(pos, placer, itemstack, pointed_thing)`
|
|
`unifieddyes.fix_rotation_nsew(pos, placer, itemstack, pointed_thing)`**
|
|
|
|
These two are used to re-orient `wallmounted` nodes after placing. The former allows positioning to floor, ceiling, and four walls, while the latter restricts the rotation to just the four walls. The latter is most often used with a node whose model is designed so that the four wall positions actually place the model "upright", facing +/- X or Z. This is a hacky way to make a node look like it has basic `facedir` capability, while being able to use the 32-color palette.
|
|
|
|
**`unifieddyes.fix_after_screwdriver_nsew(pos, node, user, mode, new_param2)`**
|
|
|
|
This serves the same purpose as the `fix_rotation_nsew`, but is used to restrict the node's rotation after it's been hit with the screwdriver.
|
|
|
|
**`unifieddyes.select_node(pointed_thing)`**
|
|
|
|
Just what it says on the tin. :-) This function returns a position and node definition of whatever is being pointed at.
|
|
|
|
**`unifieddyes.is_buildable_to(placer_name, ...)`**
|
|
|
|
Again, another obvious one, returns whether or not the pointed node is `buildable_to` (can be overwritten by another node).
|
|
|
|
**`unifieddyes.get_hsv(name)`**
|
|
|
|
Accepts an item name, and returns the corresponding hue, saturation, and value (in that order), as strings.
|
|
|
|
If the item name is a color (not greyscale), then `hue` will be the basic hue for that color, saturation will be empty string for high saturation or "_s50" for low, and value will be "dark_", "medium_", "light_", or an empty string if it's full color.
|
|
|
|
If the item name is greyscale, then `hue` will contain "white", "light_grey", "grey", "dark_grey", or "black", saturation will (ironically) be an empty string, and value will be "light_", "dark_", or empty string to correspond with the contents of `hue`.
|
|
|
|
For example:
|
|
|
|
* "mymod:mynode_red" would return ("red", "", "")
|
|
* "mymod:mynode_light_blue" would return ("blue", "", "light_")
|
|
* "mymod:mynode_dark_yellow_s50" would return ("yellow", "_s50", "dark_")
|
|
* "mymod:mynode_dark_grey" would return ("dark_grey", "", "dark_")
|
|
|
|
**`unifieddyes.getpaletteidx(color, palette_type)`**
|
|
|
|
When given a `color` string (in the form of "dye:foo" or "unifieddyes:foo") and `palette_type` (either a boolean or string), this function returns the numerical index into that palette, and the hue name as a string.
|
|
`false` or `nil`: the 89-color palette
|
|
`true`: 89 color "split" palette mode, for nodes that need full `facedir` support. In this case, the hue field would match whichever of the 13 "split" palettes the node is using, and the index will be 1-7, representing the shade within that palette. See my coloredwoods mod for more information on how this mode is used.
|
|
`wallmounted`: the 32-color palette, for nodes using `colorwallmounted` mode.
|
|
`extended`: the 256-color "extended" palette
|
|
|
|
**`unifieddyes.on_construct(pos)`**
|
|
|
|
This function, called in your node definition's on_construct, just sets the `palette = "ext"` metadata key for the node after it's been placed. This can then be read in an LBM to determine if this node needs to be converted from the old 89-color palette to the extended 256-color palette. Although it is good practice to call this for any node that uses the 256-color palette, it isn't actually necessary as long as the node has never used the 89-color palette, and won't be subjected to an LBM that changes its color.
|
|
|
|
#### Tables
|
|
|
|
In addition to the above API calls, Unified Dyes provides several useful tables
|
|
|
|
`unifieddyes.HUES` contains a list of the 12 hues used by the 89-color palette.
|
|
|
|
`unifieddyes.HUES_EXTENDED` contains a list of the 24 hues in the 256-color palette. Each line contains the color name and its RGB value expressed as three numbers (rather than the usual `#RRGGBB` string).
|
|
|
|
`unifieddyes.base_color_crafts` contains a condensed list of crafting recipes for all 24 basic hues, plus black and white, most of which have multiple alternative recipes. Each line contains the name of the color, up to five dye itemstrings (with `nil` in each unused space), and the yield for that craft.
|
|
|
|
`unifieddyes.shade_crafts` contains recipes for each of the 10 shades a hue can take on, used with one or two portions of the dye corresponding to that hue. Each line contains the shade name with trailing "_", the saturation name (either "_s50" or empty string), up to three dye item strings, and the yield for that craft.
|
|
|
|
`unifieddyes.greymixes` contains the recipes for the 14 shades of grey. Each line contains the grey shade number from 1-14, up to four dye item names, and the yield for that craft.
|
|
|
|
#### Converting an old mod
|
|
|
|
If your mod used the old paradigm where you craft a neutral-colored item, place it, and punch with dye to color it, and you wish to convert it to colored itemstacks, take the following actions for each node:
|
|
|
|
* Remove these keys:
|
|
|
|
```lua
|
|
after_dig_node = unifieddyes.after_dig_node,
|
|
place_param2 = 240,
|
|
after_place_node = unifieddyes.recolor_on_place,
|
|
```
|
|
|
|
* Add a call to the create-all-recipes helper. Here's an example:
|
|
|
|
```lua
|
|
unifieddyes.register_color_craft({
|
|
output = "mymod:colored_node 6",
|
|
palette = "extended",
|
|
neutral_node = "mymod:my_base_node_material",
|
|
recipe = {
|
|
{ "NEUTRAL_NODE", "MAIN_DYE", "NEUTRAL_NODE" },
|
|
{ "MAIN_DYE", "NEUTRAL_NODE", "MAIN_DYE" },
|
|
{ "NEUTRAL_NODE", "MAIN_DYE", "NEUTRAL_NODE" }
|
|
}
|
|
})
|
|
```
|
|
|
|
`output` is a standard item string as in the normal `minetest.register_craft()` call.
|
|
|
|
`palette` specifies the palette type to iterate through ("extended" and "wallmounted" are obvious, and if not specified, it'll use the 89 color palette).
|
|
|
|
`type` can be "shapeless" or unspecified/`nil`, and works the same as in the normal call.
|
|
|
|
`neutral_node` should specify the name of whatever item or node serves as the base, neutrally-colored material in your recipe. If there isn't one, set this to an empty string.
|
|
|
|
`recipe` is the same as in the normal call, except that Unified Dyes will replace all instances of the string "NEUTRAL_NODE" with the item specified in the preceding `neutral_node` field. Every instance of "MAIN_DYE" will be replaced with a portion of dye, as Unified Dyes' recipe helper works through its color lists (i.e. this key will become whatever dye is needed for each recipe).
|
|
|
|
If your mod never has never used Unified Dyes at all, in short, do the following:
|
|
|
|
* Remove all of your various colored node definitions, keeping only the one for the white version of your node, or delete them all, and keep whatever node you consider to be "neutral colored".
|
|
|
|
* Delete all of the colored texture files too, except keep the brightest, highest-contrast, most detailed one - whichever color that happens to be. Most likely, red or green will be the best one.
|
|
|
|
* Convert that last texture to grayscale, enhance its contrast as much as you can without distorting it, and rename it to something more neutral.
|
|
|
|
* Add the `on_construct` and `palette` keys to your neutral node definition, for example:
|
|
|
|
`palette = "unifieddyes_palette_extended.png",`
|
|
`on_construct = unifieddyes.on_construct,`
|
|
|
|
* Adjust your node's groups to specify that the node can be colored. Example (note the last item):
|
|
|
|
`groups = {snappy=2,choppy=2,oddly_breakable_by_hand=2,flammable=3, ud_param2_colorable = 1},`
|
|
|
|
* Remove all crafting recipes for all colored versions of that node, keeping only the one that makes the "neutral" one.
|
|
|
|
* Add the above recipes helper call (which replaces those delted recipes)
|
|
|
|
If your colored node is based on someone else's neutral node, for example if you made a mod that creates multiple colors of minetest_game's default clay, you may find it best to create a single "stand-in" node that's identical to the neutral node, but named for your mod, hidden from the creative inventory, and has a properly-prepared grayscale texture image in addition to the above keys. Use the neutral node and the custom hidden node as in the above craft helper call. Then use minetest.override_item() to add the on_construct and palette keys and the ud_param2_colorable group.
|