luacheck: Reduce the number of ignored codes

After the recent changes, luacheck can be configured to be more strict now, for example to check for inconsistent indentation and undefined variables.

.github/workflows/check.yml

@@ -0,0 +1,15 @@
+on: [push, pull_request]
+name: Check
+
+jobs:
+  lint:
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: actions/checkout@v2
+    - name: apt
+      run: sudo apt-get install -y luarocks
+    - name: luacheck install
+      run: luarocks install --local luacheck
+    - name: luacheck run
+      run: $HOME/.luarocks/bin/luacheck ./

.github/workflows/test.yml

@@ -0,0 +1,11 @@
+name: test
+
+on: [push, pull_request]
+
+jobs:
+  test:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v2
+    - name: Run tests
+      run: MINETEST_VER=latest ./.util/run_tests.sh

.luacheckrc

@@ -0,0 +1,8 @@
+read_globals = {"minetest", "vector", "VoxelArea", "ItemStack",
+	"table",
+	"unified_inventory", "sfinv", "smart_inventory", "inventory_plus"
+}
+globals = {"worldedit"}
+-- Ignore these errors until someone decides to fix them
+ignore = {"211", "212", "213", "311", "411", "412", "421", "422",
+	"431", "432", "631"}

.util/run_tests.sh

@@ -0,0 +1,30 @@
+#!/bin/bash
+tempdir=/tmp/mt
+confpath=$tempdir/minetest.conf
+worldpath=$tempdir/world
+
+use_docker=y
+[ -x ../../bin/minetestserver ] && use_docker=
+
+rm -rf $tempdir
+mkdir -p $worldpath
+# the docker image doesn't have devtest
+[ -n "$use_docker" ] || printf '%s\n' gameid=devtest >$worldpath/world.mt
+printf '%s\n' mg_name=singlenode '[end_of_params]' >$worldpath/map_meta.txt
+printf '%s\n' worldedit_run_tests=true max_forceloaded_blocks=9999 >$confpath
+
+if [ -n "$use_docker" ]; then
+	chmod -R 777 $tempdir
+	docker run --rm -i \
+		-v $confpath:/etc/minetest/minetest.conf \
+		-v $tempdir:/var/lib/minetest/.minetest \
+		-v "$PWD/worldedit":/var/lib/minetest/.minetest/world/worldmods/worldedit \
+		registry.gitlab.com/minetest/minetest/server:${MINETEST_VER}
+else
+	mkdir $worldpath/worldmods
+	ln -s "$PWD/worldedit" $worldpath/worldmods/worldedit
+	../../bin/minetestserver --config $confpath --world $worldpath --logfile /dev/null
+fi
+
+test -f $worldpath/tests_ok || exit 1
+exit 0

README.md

@@ -23,7 +23,7 @@ There is a nice installation guide over at the [Minetest Wiki](http://wiki.minet
 8. You should have a mod selection screen. Select the one named something like `Minetest-WorldEdit` by left clicking once and press the **Enable Modpack** button.
 9. Press the **Save** button. You can now use WorldEdit in that world. Repeat steps 7 to 9 to enable WorldEdit for other worlds too.
 
-If you are having trouble, try asking for help in the [IRC channel](https://webchat.freenode.net/?channels=#minetest) (faster but may not always have helpers online)
+If you are having trouble, try asking for help in the [IRC channel](https://web.libera.chat/#minetest) (faster but may not always have helpers online)
 or ask on the [forum topic](https://forum.minetest.net/viewtopic.php?id=572) (slower but more likely to get help).
 
 Usage

worldedit/code.lua

@@ -31,7 +31,7 @@ function worldedit.luatransform(pos1, pos2, code)
 
 	worldedit.keep_loaded(pos1, pos2)
 
-	local pos = {x=pos1.x, y=0, z=0}
+	local pos = vector.new(pos1.x, 0, 0)
 	while pos.x <= pos2.x do
 		pos.y = pos1.y
 		while pos.y <= pos2.y do

worldedit/common.lua

@@ -5,8 +5,8 @@
 -- `pos1` is less than or equal to the corresponding component of `pos2`.
 -- Returns the new positions.
 function worldedit.sort_pos(pos1, pos2)
-	pos1 = {x=pos1.x, y=pos1.y, z=pos1.z}
-	pos2 = {x=pos2.x, y=pos2.y, z=pos2.z}
+	pos1 = vector.new(pos1.x, pos1.y, pos1.z)
+	pos2 = vector.new(pos2.x, pos2.y, pos2.z)
 	if pos1.x > pos2.x then
 		pos2.x, pos1.x = pos1.x, pos2.x
 	end

worldedit/compatibility.lua

@@ -24,11 +24,14 @@ function worldedit.metasave(pos1, pos2, filename)
 	return count
 end
 
-function worldedit.metaload(originpos, filename)
+function worldedit.metaload(originpos, file_name)
 	deprecated("load")
-	filename = minetest.get_worldpath() .. "/schems/" .. file .. ".wem"
-	local file, err = io.open(filename, "wb")
-	if err then return 0 end
+	local file_path = minetest.get_worldpath() ..
+		"/schems/" .. file_name .. ".wem"
+	local file, err = io.open(file_path, "wb")
+	if err then
+		return 0
+	end
 	local data = file:read("*a")
 	return worldedit.deserialize(originpos, data)
 end

worldedit/init.lua

@@ -38,3 +38,7 @@ if minetest.settings:get_bool("log_mods") then
 	print("[WorldEdit] Loaded!")
 end
 
+if minetest.settings:get_bool("worldedit_run_tests") then
+	dofile(path .. "/test.lua")
+	minetest.after(0, worldedit.run_tests)
+end

worldedit/manipulations.lua

@@ -128,7 +128,7 @@ function worldedit.stack2(pos1, pos2, direction, amount, finished)
 	direction = table.copy(direction)
 
 	local i = 0
-	local translated = {x=0, y=0, z=0}
+	local translated = vector.new()
 	local function step()
 		translated.x = translated.x + direction.x
 		translated.y = translated.y + direction.y
@@ -155,7 +155,7 @@ function worldedit.copy(pos1, pos2, axis, amount)
 	-- Decide if we need to copy stuff backwards (only applies to metadata)
 	local backwards = amount > 0 and amount < (pos2[axis] - pos1[axis] + 1)
 
-	local off = {x=0, y=0, z=0}
+	local off = vector.new()
 	off[axis] = amount
 	return worldedit.copy2(pos1, pos2, off, backwards)
 end
@@ -170,7 +170,7 @@ function worldedit.copy2(pos1, pos2, off, meta_backwards)
 	local pos1, pos2 = worldedit.sort_pos(pos1, pos2)
 
 	local src_manip, src_area = mh.init(pos1, pos2)
-	local src_stride = {x=1, y=src_area.ystride, z=src_area.zstride}
+	local src_stride = vector.new(1, src_area.ystride, src_area.zstride)
 	local src_offset = vector.subtract(pos1, src_area.MinEdge)
 
 	local dpos1 = vector.add(pos1, off)
@@ -178,7 +178,7 @@ function worldedit.copy2(pos1, pos2, off, meta_backwards)
 	local dim = vector.add(vector.subtract(pos2, pos1), 1)
 
 	local dst_manip, dst_area = mh.init(dpos1, dpos2)
-	local dst_stride = {x=1, y=dst_area.ystride, z=dst_area.zstride}
+	local dst_stride = vector.new(1, dst_area.ystride, dst_area.zstride)
 	local dst_offset = vector.subtract(dpos1, dst_area.MinEdge)
 
 	local function do_copy(src_data, dst_data)
@@ -226,7 +226,7 @@ function worldedit.copy2(pos1, pos2, off, meta_backwards)
 	for z = dim.z-1, 0, -1 do
 		for y = dim.y-1, 0, -1 do
 			for x = dim.x-1, 0, -1 do
-				local pos = {x=pos1.x+x, y=pos1.y+y, z=pos1.z+z}
+				local pos = vector.new(pos1.x+x, pos1.y+y, pos1.z+z)
 				local meta = get_meta(pos):to_table()
 				pos = vector.add(pos, off)
 				get_meta(pos):from_table(meta)
@@ -237,7 +237,7 @@ function worldedit.copy2(pos1, pos2, off, meta_backwards)
 	for z = 0, dim.z-1 do
 		for y = 0, dim.y-1 do
 			for x = 0, dim.x-1 do
-				local pos = {x=pos1.x+x, y=pos1.y+y, z=pos1.z+z}
+				local pos = vector.new(pos1.x+x, pos1.y+y, pos1.z+z)
 				local meta = get_meta(pos):to_table()
 				pos = vector.add(pos, off)
 				get_meta(pos):from_table(meta)
@@ -286,21 +286,21 @@ function worldedit.move(pos1, pos2, axis, amount)
 	end
 
 	-- Copy stuff to new location
-	local off = {x=0, y=0, z=0}
+	local off = vector.new()
 	off[axis] = amount
 	worldedit.copy2(pos1, pos2, off, backwards)
 	-- Nuke old area
 	if not overlap then
-		nuke_area({x=0, y=0, z=0}, dim)
+		nuke_area(vector.new(), dim)
 	else
 		-- Source and destination region are overlapping, which means we can't
 		-- blindly delete the [pos1, pos2] area
 		local leftover = vector.new(dim) -- size of the leftover slice
 		leftover[axis] = math.abs(amount)
 		if amount > 0 then
-			nuke_area({x=0, y=0, z=0}, leftover)
+			nuke_area(vector.new(), leftover)
 		else
-			local top = {x=0, y=0, z=0} -- offset of the leftover slice from pos1
+			local top = vector.new() -- offset of the leftover slice from pos1
 			top[axis] = dim[axis] - math.abs(amount)
 			nuke_area(top, leftover)
 		end
@@ -358,7 +358,7 @@ function worldedit.stretch(pos1, pos2, stretch_x, stretch_y, stretch_z)
 	for i = 1, stretch_x * stretch_y * stretch_z do
 		nodes[i] = placeholder_node
 	end
-	local schematic = {size={x=stretch_x, y=stretch_y, z=stretch_z}, data=nodes}
+	local schematic = {size=vector.new(stretch_x, stretch_y, stretch_z), data=nodes}
 
 	local size_x, size_y, size_z = stretch_x - 1, stretch_y - 1, stretch_z - 1
 
@@ -369,8 +369,8 @@ function worldedit.stretch(pos1, pos2, stretch_x, stretch_y, stretch_z)
 	}
 	worldedit.keep_loaded(pos1, new_pos2)
 
-	local pos = {x=pos2.x, y=0, z=0}
-	local big_pos = {x=0, y=0, z=0}
+	local pos = vector.new(pos2.x, 0, 0)
+	local big_pos = vector.new()
 	while pos.x >= pos1.x do
 		pos.y = pos2.y
 		while pos.y >= pos1.y do
@@ -436,16 +436,16 @@ function worldedit.transpose(pos1, pos2, axis1, axis2)
 	end
 
 	-- Calculate the new position 2 after transposition
-	local new_pos2 = {x=pos2.x, y=pos2.y, z=pos2.z}
+	local new_pos2 = vector.new(pos2)
 	new_pos2[axis1] = pos1[axis1] + extent2
 	new_pos2[axis2] = pos1[axis2] + extent1
 
-	local upper_bound = {x=pos2.x, y=pos2.y, z=pos2.z}
+	local upper_bound = vector.new(pos2)
 	if upper_bound[axis1] < new_pos2[axis1] then upper_bound[axis1] = new_pos2[axis1] end
 	if upper_bound[axis2] < new_pos2[axis2] then upper_bound[axis2] = new_pos2[axis2] end
 	worldedit.keep_loaded(pos1, upper_bound)
 
-	local pos = {x=pos1.x, y=0, z=0}
+	local pos = vector.new(pos1.x, 0, 0)
 	local get_node, get_meta, set_node = minetest.get_node,
 			minetest.get_meta, minetest.set_node
 	while pos.x <= pos2.x do
@@ -485,7 +485,7 @@ function worldedit.flip(pos1, pos2, axis)
 	worldedit.keep_loaded(pos1, pos2)
 
 	--- TODO: Flip the region slice by slice along the flip axis using schematic method.
-	local pos = {x=pos1.x, y=0, z=0}
+	local pos = vector.new(pos1.x, 0, 0)
 	local start = pos1[axis] + pos2[axis]
 	pos2[axis] = pos1[axis] + math.floor((pos2[axis] - pos1[axis]) / 2)
 	local get_node, get_meta, set_node = minetest.get_node,
@@ -584,7 +584,7 @@ function worldedit.orient(pos1, pos2, angle)
 
 	local count = 0
 	local get_node, swap_node = minetest.get_node, minetest.swap_node
-	local pos = {x=pos1.x, y=0, z=0}
+	local pos = vector.new(pos1.x, 0, 0)
 	while pos.x <= pos2.x do
 		pos.y = pos1.y
 		while pos.y <= pos2.y do
@@ -640,31 +640,50 @@ function worldedit.clear_objects(pos1, pos2)
 
 	worldedit.keep_loaded(pos1, pos2)
 
-	-- Offset positions to include full nodes (positions are in the center of nodes)
-	local pos1x, pos1y, pos1z = pos1.x - 0.5, pos1.y - 0.5, pos1.z - 0.5
-	local pos2x, pos2y, pos2z = pos2.x + 0.5, pos2.y + 0.5, pos2.z + 0.5
+	local function should_delete(obj)
+		-- Avoid players and WorldEdit entities
+		if obj:is_player() then
+			return false
+		end
+		local entity = obj:get_luaentity()
+		return not entity or not entity.name:find("^worldedit:")
+	end
 
+	-- Offset positions to include full nodes (positions are in the center of nodes)
+	pos1 = vector.add(pos1, -0.5)
+	pos2 = vector.add(pos1, 0.5)
+
+	local count = 0
+	if minetest.get_objects_in_area then
+		local objects = minetest.get_objects_in_area(pos1, pos2)
+
+		for _, obj in pairs(objects) do
+			if should_delete(obj) then
+				obj:remove()
+				count = count + 1
+			end
+		end
+		return count
+	end
+
+	-- Fallback implementation via get_objects_inside_radius
 	-- Center of region
 	local center = {
-		x = pos1x + ((pos2x - pos1x) / 2),
-		y = pos1y + ((pos2y - pos1y) / 2),
-		z = pos1z + ((pos2z - pos1z) / 2)
+		x = pos1.x + ((pos2.x - pos1.x) / 2),
+		y = pos1.y + ((pos2.y - pos1.y) / 2),
+		z = pos1.z + ((pos2.z - pos1.z) / 2)
 	}
 	-- Bounding sphere radius
 	local radius = math.sqrt(
-			(center.x - pos1x) ^ 2 +
-			(center.y - pos1y) ^ 2 +
-			(center.z - pos1z) ^ 2)
-	local count = 0
+			(center.x - pos1.x) ^ 2 +
+			(center.y - pos1.y) ^ 2 +
+			(center.z - pos1.z) ^ 2)
 	for _, obj in pairs(minetest.get_objects_inside_radius(center, radius)) do
-		local entity = obj:get_luaentity()
-		-- Avoid players and WorldEdit entities
-		if not obj:is_player() and (not entity or
-				not entity.name:find("^worldedit:")) then
+		if should_delete(obj) then
 			local pos = obj:get_pos()
-			if pos.x >= pos1x and pos.x <= pos2x and
-					pos.y >= pos1y and pos.y <= pos2y and
-					pos.z >= pos1z and pos.z <= pos2z then
+			if pos.x >= pos1.x and pos.x <= pos2.x and
+					pos.y >= pos1.y and pos.y <= pos2.y and
+					pos.z >= pos1.z and pos.z <= pos2.z then
 				-- Inside region
 				obj:remove()
 				count = count + 1

worldedit/primitives.lua

@@ -20,7 +20,7 @@ function worldedit.cube(pos, width, height, length, node_name, hollow)
 
 	-- Add cube
 	local node_id = minetest.get_content_id(node_name)
-	local stride = {x=1, y=area.ystride, z=area.zstride}
+	local stride = vector.new(1, area.ystride, area.zstride)
 	local offset = vector.subtract(basepos, area.MinEdge)
 	local count = 0
 
@@ -149,7 +149,7 @@ function worldedit.cylinder(pos, axis, length, radius1, radius2, node_name, holl
 	end
 
 	-- Handle negative lengths
-	local current_pos = {x=pos.x, y=pos.y, z=pos.z}
+	local current_pos = vector.new(pos)
 	if length < 0 then
 		length = -length
 		current_pos[axis] = current_pos[axis] - length
@@ -162,7 +162,7 @@ function worldedit.cylinder(pos, axis, length, radius1, radius2, node_name, holl
 
 	-- Add desired shape (anything inbetween cylinder & cone)
 	local node_id = minetest.get_content_id(node_name)
-	local stride = {x=1, y=area.ystride, z=area.zstride}
+	local stride = vector.new(1, area.ystride, area.zstride)
 	local offset = {
 		x = current_pos.x - area.MinEdge.x,
 		y = current_pos.y - area.MinEdge.y,
@@ -225,7 +225,7 @@ function worldedit.pyramid(pos, axis, height, node_name, hollow)
 
 	-- Add pyramid
 	local node_id = minetest.get_content_id(node_name)
-	local stride = {x=1, y=area.ystride, z=area.zstride}
+	local stride = vector.new(1, area.ystride, area.zstride)
 	local offset = {
 		x = pos.x - area.MinEdge.x,
 		y = pos.y - area.MinEdge.y,
@@ -271,7 +271,7 @@ function worldedit.spiral(pos, length, height, spacer, node_name)
 
 	-- Set up variables
 	local node_id = minetest.get_content_id(node_name)
-	local stride = {x=1, y=area.ystride, z=area.zstride}
+	local stride = vector.new(1, area.ystride, area.zstride)
 	local offset_x, offset_y, offset_z = pos.x - area.MinEdge.x, pos.y - area.MinEdge.y, pos.z - area.MinEdge.z
 	local i = offset_z * stride.z + offset_y * stride.y + offset_x + 1
 

worldedit/serialization.lua

@@ -66,7 +66,7 @@ function worldedit.serialize(pos1, pos2)
 		has_meta[hash_node_position(meta_positions[i])] = true
 	end
 
-	local pos = {x=pos1.x, y=0, z=0}
+	local pos = vector.new(pos1.x, 0, 0)
 	local count = 0
 	local result = {}
 	while pos.x <= pos2.x do
@@ -114,12 +114,15 @@ function worldedit.serialize(pos1, pos2)
 	return LATEST_SERIALIZATION_HEADER .. result, count
 end
 
--- Contains code based on [table.save/table.load](http://lua-users.org/wiki/SaveTableToFile)
--- by ChillCode, available under the MIT license.
 local function deserialize_workaround(content)
-	local nodes
-	if not jit then
-		nodes = minetest.deserialize(content, true)
+	local nodes, err
+	if not minetest.global_exists("jit") then
+		nodes, err = minetest.deserialize(content, true)
+	elseif not content:match("^%s*return%s*{") then
+		-- The data doesn't look like we expect it to so we can't apply the workaround.
+		-- hope for the best
+		minetest.log("warning", "WorldEdit: deserializing data but can't apply LuaJIT workaround")
+		nodes, err = minetest.deserialize(content, true)
 	else
 		-- XXX: This is a filthy hack that works surprisingly well
 		-- in LuaJIT, `minetest.deserialize` will fail due to the register limit
@@ -129,19 +132,28 @@ local function deserialize_workaround(content)
 		local escaped = content:gsub("\\\\", "@@"):gsub("\\\"", "@@"):gsub("(\"[^\"]*\")", function(s) return string.rep("@", #s) end)
 		local startpos, startpos1 = 1, 1
 		local endpos
+		local entry
 		while true do -- go through each individual node entry (except the last)
-			startpos, endpos = escaped:find("},%s*{", startpos)
+			startpos, endpos = escaped:find("}%s*,%s*{", startpos)
 			if not startpos then
 				break
 			end
 			local current = content:sub(startpos1, startpos)
-			local entry = minetest.deserialize("return " .. current, true)
+			entry, err = minetest.deserialize("return " .. current, true)
+			if not entry then
+				break
+			end
 			table.insert(nodes, entry)
 			startpos, startpos1 = endpos, endpos
 		end
-		local entry = minetest.deserialize("return " .. content:sub(startpos1), true) -- process the last entry
+		if not err then
+			entry = minetest.deserialize("return " .. content:sub(startpos1), true) -- process the last entry
 			table.insert(nodes, entry)
 		end
+	end
+	if err then
+		minetest.log("warning", "WorldEdit: deserialize: " .. err)
+	end
 	return nodes
 end
 
@@ -223,9 +235,7 @@ function worldedit.allocate_with_nodes(origin_pos, nodes)
 		if y > pos2y then pos2y = y end
 		if z > pos2z then pos2z = z end
 	end
-	local pos1 = {x=pos1x, y=pos1y, z=pos1z}
-	local pos2 = {x=pos2x, y=pos2y, z=pos2z}
-	return pos1, pos2, #nodes
+	return vector.new(pos1x, pos1y, pos1z), vector.new(pos2x, pos2y, pos2z), #nodes
 end
 
 

worldedit/test.lua

@@ -0,0 +1,602 @@
+---------------------
+-- Helpers
+---------------------
+
+local vec = vector.new
+local vecw = function(axis, n, base)
+	local ret = vec(base)
+	ret[axis] = n
+	return ret
+end
+local pos2str = minetest.pos_to_string
+local get_node = minetest.get_node
+local set_node = minetest.set_node
+
+---------------------
+-- Nodes
+---------------------
+local air = "air"
+local testnode1
+local testnode2
+local testnode3
+-- Loads nodenames to use for tests
+local function init_nodes()
+	testnode1 = minetest.registered_aliases["mapgen_stone"]
+	testnode2 = minetest.registered_aliases["mapgen_dirt"]
+	testnode3 = minetest.registered_aliases["mapgen_cobble"] or minetest.registered_aliases["mapgen_dirt_with_grass"]
+	assert(testnode1 and testnode2 and testnode3)
+end
+-- Writes repeating pattern into given area
+local function place_pattern(pos1, pos2, pattern)
+	local pos = vec()
+	local node = {name=""}
+	local i = 1
+	for z = pos1.z, pos2.z do
+		pos.z = z
+	for y = pos1.y, pos2.y do
+		pos.y = y
+	for x = pos1.x, pos2.x do
+		pos.x = x
+		node.name = pattern[i]
+		set_node(pos, node)
+		i = i % #pattern + 1
+	end
+	end
+	end
+end
+
+
+---------------------
+-- Area management
+---------------------
+assert(minetest.get_mapgen_setting("mg_name") == "singlenode")
+local area = {}
+do
+	local areamin, areamax
+	local off
+	local c_air = minetest.get_content_id(air)
+	local vbuffer = {}
+	-- Assign a new area for use, will emerge and then call ready()
+	area.assign = function(min, max, ready)
+		areamin = min
+		areamax = max
+		minetest.emerge_area(min, max, function(bpos, action, remaining)
+			assert(action ~= minetest.EMERGE_ERRORED)
+			if remaining > 0 then return end
+			minetest.after(0, function()
+				area.clear()
+				ready()
+			end)
+		end)
+	end
+	-- Reset area contents and state
+	area.clear = function()
+		local vmanip = minetest.get_voxel_manip(areamin, areamax)
+		local vpos1, vpos2 = vmanip:get_emerged_area()
+		local vcount = (vpos2.x - vpos1.x + 1) * (vpos2.y - vpos1.y + 1) * (vpos2.z - vpos1.z + 1)
+		if #vbuffer ~= vcount then
+			vbuffer = {}
+			for i = 1, vcount do
+				vbuffer[i] = c_air
+			end
+		end
+		vmanip:set_data(vbuffer)
+		vmanip:write_to_map()
+		off = vec(0, 0, 0)
+	end
+	-- Returns an usable area [pos1, pos2] that does not overlap previous ones
+	area.get = function(sizex, sizey, sizez)
+		local size
+		if sizey == nil and sizez == nil then
+			size = vector.new(sizex, sizex, sizex)
+		else
+			size = vector.new(sizex, sizey, sizez)
+		end
+		local pos1 = vector.add(areamin, off)
+		local pos2 = vector.subtract(vector.add(pos1, size), 1)
+		if pos2.x > areamax.x or pos2.y > areamax.y or pos2.z > areamax.z then
+			error("Internal failure: out of space")
+		end
+		off = vector.add(off, size)
+		return pos1, pos2
+	end
+	-- Returns an axis and count (= n) relative to the last-requested area that is unoccupied
+	area.dir = function(n)
+		local pos1 = vector.add(areamin, off)
+		if pos1.x + n <= areamax.x then
+			off.x = off.x + n
+			return "x", n
+		elseif pos1.x + n <= areamax.y then
+			off.y = off.y + n
+			return "y", n
+		elseif pos1.z + n <= areamax.z then
+			off.z = off.z + n
+			return "z", n
+		end
+		error("Internal failure: out of space")
+	end
+	-- Returns [XYZ] margin (list of pos pairs) of n around last-requested area
+	-- (may actually be larger but doesn't matter)
+	area.margin = function(n)
+		local pos1, pos2 = area.get(n)
+		return {
+			{ vec(areamin.x, areamin.y, pos1.z), pos2 }, -- X/Y
+			{ vec(areamin.x, pos1.y, areamin.z), pos2 }, -- X/Z
+			{ vec(pos1.x, areamin.y, areamin.z), pos2 }, -- Y/Z
+		}
+	end
+end
+-- Split an existing area into two non-overlapping [pos1, half1], [half2, pos2] parts; returns half1, half2
+area.split = function(pos1, pos2)
+	local axis
+	if pos2.x - pos1.x >= 1 then
+		axis = "x"
+	elseif pos2.y - pos1.y >= 1 then
+		axis = "y"
+	elseif pos2.z - pos1.z >= 1 then
+		axis = "z"
+	else
+		error("Internal failure: area too small to split")
+	end
+	local hspan = math.floor((pos2[axis] - pos1[axis] + 1) / 2)
+	local half1 = vecw(axis, pos1[axis] + hspan - 1, pos2)
+	local half2 = vecw(axis, pos1[axis] + hspan, pos2)
+	return half1, half2
+end
+
+
+---------------------
+-- Checks
+---------------------
+local check = {}
+-- Check that all nodes in [pos1, pos2] are the node(s) specified
+check.filled = function(pos1, pos2, nodes)
+	if type(nodes) == "string" then
+		nodes = { nodes }
+	end
+	local _, counts = minetest.find_nodes_in_area(pos1, pos2, nodes)
+	local total = worldedit.volume(pos1, pos2)
+	local sum = 0
+	for _, n in pairs(counts) do
+		sum = sum + n
+	end
+	if sum ~= total then
+		error((total - sum) .. " " .. table.concat(nodes, ",") .. " nodes missing in " ..
+			pos2str(pos1) .. " -> " .. pos2str(pos2))
+	end
+end
+-- Check that none of the nodes in [pos1, pos2] are the node(s) specified
+check.not_filled = function(pos1, pos2, nodes)
+	if type(nodes) == "string" then
+		nodes = { nodes }
+	end
+	local _, counts = minetest.find_nodes_in_area(pos1, pos2, nodes)
+	for nodename, n in pairs(counts) do
+		if n ~= 0 then
+			error(counts[nodename] .. " " .. nodename .. " nodes found in " ..
+				pos2str(pos1) .. " -> " .. pos2str(pos2))
+		end
+	end
+end
+-- Check that all of the areas are only made of node(s) specified
+check.filled2 = function(list, nodes)
+	for _, pos in ipairs(list) do
+		check.filled(pos[1], pos[2], nodes)
+	end
+end
+-- Check that none of the areas contain the node(s) specified
+check.not_filled2 = function(list, nodes)
+	for _, pos in ipairs(list) do
+		check.not_filled(pos[1], pos[2], nodes)
+	end
+end
+-- Checks presence of a repeating pattern in [pos1, po2] (cf. place_pattern)
+check.pattern = function(pos1, pos2, pattern)
+	local pos = vec()
+	local i = 1
+	for z = pos1.z, pos2.z do
+		pos.z = z
+	for y = pos1.y, pos2.y do
+		pos.y = y
+	for x = pos1.x, pos2.x do
+		pos.x = x
+		local node = get_node(pos)
+		if node.name ~= pattern[i] then
+			error(pattern[i] .. " not found at " .. pos2str(pos) .. " (i=" .. i .. ")")
+		end
+		i = i % #pattern + 1
+	end
+	end
+	end
+end
+
+
+---------------------
+-- The actual tests
+---------------------
+local tests = {}
+local function register_test(name, func, opts)
+	assert(type(name) == "string")
+	assert(func == nil or type(func) == "function")
+	if not opts then
+		opts = {}
+	else
+		opts = table.copy(opts)
+	end
+	opts.name = name
+	opts.func = func
+	table.insert(tests, opts)
+end
+-- How this works:
+--   register_test registers a test with a name and function
+--   The function should return if the test passes or otherwise cause a Lua error
+--   The basic structure is: get areas + do operations + check results
+-- Helpers:
+--   area.get must be used to retrieve areas that can be operated on (these will be cleared before each test)
+--   check.filled / check.not_filled can be used to check the result
+--   area.margin + check.filled2 is useful to make sure nodes weren't placed too far
+--   place_pattern + check.pattern is useful to test ops that operate on existing data
+
+
+register_test("Internal self-test")
+register_test("is area loaded?", function()
+	local pos1, _ = area.get(1)
+	assert(get_node(pos1).name == "air")
+end, {dry=true})
+
+register_test("area.split", function()
+	for i = 2, 6 do
+		local pos1, pos2 = area.get(1, 1, i)
+		local half1, half2 = area.split(pos1, pos2)
+		assert(pos1.x == half1.x and pos1.y == half1.y)
+		assert(half1.x == half2.x and half1.y == half2.y)
+		assert(half1.z + 1 == half2.z)
+		if i % 2 == 0 then
+			assert((half1.z - pos1.z) == (pos2.z - half2.z)) -- divided equally
+		end
+	end
+end, {dry=true})
+
+register_test("check.filled", function()
+	local pos1, pos2 = area.get(1, 2, 1)
+	set_node(pos1, {name=testnode1})
+	set_node(pos2, {name=testnode2})
+	check.filled(pos1, pos1, testnode1)
+	check.filled(pos1, pos2, {testnode1, testnode2})
+	check.not_filled(pos1, pos1, air)
+	check.not_filled(pos1, pos2, {air, testnode3})
+end)
+
+register_test("pattern", function()
+	local pos1, pos2 = area.get(3, 2, 1)
+	local pattern = {testnode1, testnode3}
+	place_pattern(pos1, pos2, pattern)
+	assert(get_node(pos1).name == testnode1)
+	check.pattern(pos1, pos2, pattern)
+end)
+
+
+register_test("Generic node manipulations")
+register_test("worldedit.set", function()
+	local pos1, pos2 = area.get(10)
+	local m = area.margin(1)
+
+	worldedit.set(pos1, pos2, testnode1)
+
+	check.filled(pos1, pos2, testnode1)
+	check.filled2(m, air)
+end)
+
+register_test("worldedit.set mix", function()
+	local pos1, pos2 = area.get(10)
+	local m = area.margin(1)
+
+	worldedit.set(pos1, pos2, {testnode1, testnode2})
+
+	check.filled(pos1, pos2, {testnode1, testnode2})
+	check.filled2(m, air)
+end)
+
+register_test("worldedit.replace", function()
+	local pos1, pos2 = area.get(10)
+	local half1, half2 = area.split(pos1, pos2)
+
+	worldedit.set(pos1, half1, testnode1)
+	worldedit.set(half2, pos2, testnode2)
+	worldedit.replace(pos1, pos2, testnode1, testnode3)
+
+	check.not_filled(pos1, pos2, testnode1)
+	check.filled(pos1, half1, testnode3)
+	check.filled(half2, pos2, testnode2)
+end)
+
+register_test("worldedit.replace inverse", function()
+	local pos1, pos2 = area.get(10)
+	local half1, half2 = area.split(pos1, pos2)
+
+	worldedit.set(pos1, half1, testnode1)
+	worldedit.set(half2, pos2, testnode2)
+	worldedit.replace(pos1, pos2, testnode1, testnode3, true)
+
+	check.filled(pos1, half1, testnode1)
+	check.filled(half2, pos2, testnode3)
+end)
+
+-- FIXME?: this one looks overcomplicated
+register_test("worldedit.copy", function()
+	local pos1, pos2 = area.get(4)
+	local axis, n = area.dir(2)
+	local m = area.margin(1)
+	local b = pos1[axis]
+
+	-- create one slice with testnode1, one with testnode2
+	worldedit.set(pos1, vecw(axis, b + 1, pos2), testnode1)
+	worldedit.set(vecw(axis, b + 2, pos1), pos2, testnode2)
+	worldedit.copy(pos1, pos2, axis, n)
+
+	-- should have three slices now
+	check.filled(pos1, vecw(axis, b + 1, pos2), testnode1)
+	check.filled(vecw(axis, b + 2, pos1), pos2, testnode1)
+	check.filled(vecw(axis, b + 4, pos1), vector.add(pos2, vecw(axis, n)), testnode2)
+	check.filled2(m, "air")
+end)
+
+register_test("worldedit.copy2", function()
+	local pos1, pos2 = area.get(6)
+	local m1 = area.margin(1)
+	local pos1_, pos2_ = area.get(6)
+	local m2 = area.margin(1)
+
+	local pattern = {testnode1, testnode2, testnode3, testnode1, testnode2}
+	place_pattern(pos1, pos2, pattern)
+	worldedit.copy2(pos1, pos2, vector.subtract(pos1_, pos1))
+
+	check.pattern(pos1, pos2, pattern)
+	check.pattern(pos1_, pos2_, pattern)
+	check.filled2(m1, "air")
+	check.filled2(m2, "air")
+end)
+
+register_test("worldedit.move (overlap)", function()
+	local pos1, pos2 = area.get(7)
+	local axis, n = area.dir(2)
+	local m = area.margin(1)
+
+	local pattern = {testnode2, testnode1, testnode2, testnode3, testnode3}
+	place_pattern(pos1, pos2, pattern)
+	worldedit.move(pos1, pos2, axis, n)
+
+	check.filled(pos1, vecw(axis, pos1[axis] + n - 1, pos2), "air")
+	check.pattern(vecw(axis, pos1[axis] + n, pos1), vecw(axis, pos2[axis] + n, pos2), pattern)
+	check.filled2(m, "air")
+end)
+
+register_test("worldedit.move", function()
+	local pos1, pos2 = area.get(10)
+	local axis, n = area.dir(10)
+	local m = area.margin(1)
+
+	local pattern = {testnode1, testnode3, testnode3, testnode2}
+	place_pattern(pos1, pos2, pattern)
+	worldedit.move(pos1, pos2, axis, n)
+
+	check.filled(pos1, pos2, "air")
+	check.pattern(vecw(axis, pos1[axis] + n, pos1), vecw(axis, pos2[axis] + n, pos2), pattern)
+	check.filled2(m, "air")
+end)
+
+-- TODO: the rest (also testing param2 + metadata)
+
+register_test("Schematics")
+register_test("worldedit.read_header", function()
+	local value = '5,foo,BAR,-1,234:the content'
+	local version, header, content = worldedit.read_header(value)
+	assert(version == 5)
+	assert(#header == 4)
+	assert(header[1] == "foo" and header[2] == "BAR")
+	assert(header[3] == "-1" and header[4] == "234")
+	assert(content == "the content")
+end)
+
+register_test("worldedit.allocate", function()
+	local value = '3:-1 0 0 dummy 0 0\n0 0 4 dummy 0 0\n0 1 0 dummy 0 0'
+	local pos1, pos2, count = worldedit.allocate(vec(1, 1, 1), value)
+	assert(vector.equals(pos1, vec(0, 1, 1)))
+	assert(vector.equals(pos2, vec(1, 2, 5)))
+	assert(count == 3)
+end)
+
+do
+	local function output_weird(numbers, body)
+		local s = {"return {"}
+		for _, parts in ipairs(numbers) do
+			s[#s+1] = "{"
+			for _, n in ipairs(parts) do
+				s[#s+1] = string.format("   {%d},", n)
+			end
+			s[#s+1] = "},"
+		end
+		return table.concat(s, "\n") .. table.concat(body, "\n") .. "}"
+	end
+	local fmt1p = '{\n   ["x"]=%d,\n   ["y"]=%d,\n   ["z"]=%d,\n},'
+	local fmt1n = '{\n   ["name"]="%s",\n},'
+	local fmt4 = '{ ["x"] = %d, ["y"] = %d, ["z"] = %d, ["meta"] = { ["fields"] = {  }, ["inventory"] = {  } }, ["param2"] = 0, ["param1"] = 0, ["name"] = "%s" }'
+	local fmt5 = '{ ["x"] = %d, ["y"] = %d, ["z"] = %d, ["name"] = "%s" }'
+	local fmt51 = '{[r2]=0,x=%d,y=%d,z=%d,name=r%d}'
+	local fmt52 = '{x=%d,y=%d,z=%d,name=_[%d]}'
+	local test_data = {
+		-- used by WorldEdit 0.2 (first public release)
+		{
+			name = "v1", ver = 1,
+			gen = function(pat)
+				local numbers = {
+					{2, 3, 4, 5, 6},
+					{7, 8}, {9, 10}, {11, 12},
+					{13, 14}, {15, 16}
+				}
+				return output_weird(numbers, {
+					fmt1p:format(0, 0, 0),
+					fmt1n:format(pat[1]),
+					fmt1p:format(0, 1, 0),
+					fmt1n:format(pat[3]),
+					fmt1p:format(1, 1, 0),
+					fmt1n:format(pat[1]),
+					fmt1p:format(1, 0, 1),
+					fmt1n:format(pat[3]),
+					fmt1p:format(0, 1, 1),
+					fmt1n:format(pat[1]),
+				})
+			end
+		},
+
+		-- v2: missing because I couldn't find any code in my archives that actually wrote this format
+
+		{
+			name = "v3", ver = 3,
+			gen = function(pat)
+				assert(pat[2] == "air")
+				return table.concat({
+				"0 0 0 " .. pat[1] .. " 0 0",
+				"0 1 0 " .. pat[3] .. " 0 0",
+				"1 1 0 " .. pat[1] .. " 0 0",
+				"1 0 1 " .. pat[3] .. " 0 0",
+				"0 1 1 " .. pat[1] .. " 0 0",
+				}, "\n")
+			end
+		},
+
+		{
+			name = "v4", ver = 4,
+			gen = function(pat)
+				return table.concat({
+				"return { " .. fmt4:format(0, 0, 0, pat[1]),
+				fmt4:format(0, 1, 0, pat[3]),
+				fmt4:format(1, 1, 0, pat[1]),
+				fmt4:format(1, 0, 1, pat[3]),
+				fmt4:format(0, 1, 1, pat[1]) .. " }",
+				}, ", ")
+			end
+		},
+
+		-- like v4 but no meta and param (if empty)
+		{
+			name = "v5 (pre-5.6)", ver = 5,
+			gen = function(pat)
+				return table.concat({
+				"5:return { " .. fmt5:format(0, 0, 0, pat[1]),
+				fmt5:format(0, 1, 0, pat[3]),
+				fmt5:format(1, 1, 0, pat[1]),
+				fmt5:format(1, 0, 1, pat[3]),
+				fmt5:format(0, 1, 1, pat[1]) .. " }",
+				}, ", ")
+			end
+		},
+
+		-- reworked engine serialization in 5.6
+		{
+			name = "v5 (5.6)", ver = 5,
+			gen = function(pat)
+				return table.concat({
+				'5:r1="' .. pat[1] .. '";r2="param1";r3="' .. pat[3] .. '";return {'
+				.. fmt51:format(0, 0, 0, 1),
+				fmt51:format(0, 1, 0, 3),
+				fmt51:format(1, 1, 0, 1),
+				fmt51:format(1, 0, 1, 3),
+				fmt51:format(0, 1, 1, 1) .. "}",
+				}, ",")
+			end
+		},
+
+		-- small changes on engine side again
+		{
+			name = "v5 (post-5.7)", ver = 5,
+			gen = function(pat)
+				return table.concat({
+				'5:local _={};_[1]="' .. pat[1] .. '";_[3]="' .. pat[3] .. '";return {'
+				.. fmt52:format(0, 0, 0, 1),
+				fmt52:format(0, 1, 0, 3),
+				fmt52:format(1, 1, 0, 1),
+				fmt52:format(1, 0, 1, 3),
+				fmt52:format(0, 1, 1, 1) .. "}",
+				}, ",")
+			end
+		},
+	}
+	for _, e in ipairs(test_data) do
+		register_test("worldedit.deserialize " .. e.name, function()
+			local pos1, pos2 = area.get(2)
+			local m = area.margin(1)
+
+			local pat = {testnode3, "air", testnode2}
+			local value = e.gen(pat)
+			assert(type(value) == "string")
+
+			local version = worldedit.read_header(value)
+			assert(version == e.ver, "version: got " .. tostring(version) .. " expected " .. e.ver)
+			local count = worldedit.deserialize(pos1, value)
+			assert(count ~= nil and count > 0)
+
+			check.pattern(pos1, pos2, pat)
+			check.filled2(m, "air")
+		end)
+	end
+end
+
+---------------------
+-- Main function
+---------------------
+worldedit.run_tests = function()
+	do
+		local v = minetest.get_version()
+		print("Running " .. #tests .. " tests for WorldEdit " ..
+			worldedit.version_string .. " on " .. v.project .. " " .. (v.hash or v.string))
+	end
+
+	init_nodes()
+
+	-- emerge area from (0,0,0) ~ (56,56,56) and keep it loaded
+	-- Note: making this area smaller speeds up tests
+	local wanted = vec(56, 56, 56)
+	for x = 0, math.floor(wanted.x/16) do
+	for y = 0, math.floor(wanted.y/16) do
+	for z = 0, math.floor(wanted.z/16) do
+		assert(minetest.forceload_block(vector.new(x*16, y*16, z*16), true))
+	end
+	end
+	end
+	area.assign(vec(0, 0, 0), wanted, function()
+
+		local failed = 0
+		for _, test in ipairs(tests) do
+			if not test.func then
+				local s = "---- " .. test.name .. " "
+				print(s .. string.rep("-", 60 - #s))
+			else
+				if not test.dry then
+					area.clear()
+				end
+				local ok, err = pcall(test.func)
+				print(string.format("%-60s %s", test.name, ok and "pass" or "FAIL"))
+				if not ok then
+					print("   " .. err)
+					failed = failed + 1
+				end
+			end
+		end
+
+		print("Done, " .. failed .. " tests failed.")
+		if failed == 0 then
+			io.close(io.open(minetest.get_worldpath() .. "/tests_ok", "w"))
+		end
+		minetest.request_shutdown()
+	end)
+end
+
+-- for debug purposes
+minetest.register_on_joinplayer(function(player)
+	minetest.set_player_privs(player:get_player_name(),
+		minetest.string_to_privs("fly,fast,noclip,basic_debug,debug,interact"))
+end)
+minetest.register_on_punchnode(function(pos, node, puncher)
+	minetest.chat_send_player(puncher:get_player_name(), pos2str(pos))
+end)

worldedit/visualization.lua

@@ -19,7 +19,7 @@ function worldedit.hide(pos1, pos2)
 
 	worldedit.keep_loaded(pos1, pos2)
 
-	local pos = {x=pos1.x, y=0, z=0}
+	local pos = vector.new(pos1.x, 0, 0)
 	local get_node, get_meta, swap_node = minetest.get_node,
 			minetest.get_meta, minetest.swap_node
 	while pos.x <= pos2.x do
@@ -79,7 +79,7 @@ function worldedit.highlight(pos1, pos2, node_name)
 
 	worldedit.keep_loaded(pos1, pos2)
 
-	local pos = {x=pos1.x, y=0, z=0}
+	local pos = vector.new(pos1.x, 0, 0)
 	local get_node, get_meta, swap_node = minetest.get_node,
 			minetest.get_meta, minetest.swap_node
 	local count = 0

worldedit_brush/init.lua

@@ -27,7 +27,7 @@ local brush_on_use = function(itemstack, placer)
 	end
 
 	local raybegin = vector.add(placer:get_pos(),
-		{x=0, y=placer:get_properties().eye_height, z=0})
+		vector.new(0, placer:get_properties().eye_height, 0))
 	local rayend = vector.add(raybegin, vector.multiply(placer:get_look_dir(), BRUSH_MAX_DIST))
 	local ray = minetest.raycast(raybegin, rayend, false, true)
 	local pointed_thing = ray:next()

worldedit_commands/init.lua

@@ -226,6 +226,39 @@ local function check_filename(name)
 	return name:find("^[%w%s%^&'@{}%[%],%$=!%-#%(%)%%%.%+~_]+$") ~= nil
 end
 
+local function open_schematic(name, param)
+	-- find the file in the world path
+	local testpaths = {
+		minetest.get_worldpath() .. "/schems/" .. param,
+		minetest.get_worldpath() .. "/schems/" .. param .. ".we",
+		minetest.get_worldpath() .. "/schems/" .. param .. ".wem",
+	}
+	local file, err
+	for index, path in ipairs(testpaths) do
+		file, err = io.open(path, "rb")
+		if not err then
+			break
+		end
+	end
+	if err then
+		worldedit.player_notify(name, "Could not open file \"" .. param .. "\"")
+		return
+	end
+	local value = file:read("*a")
+	file:close()
+
+	local version = worldedit.read_header(value)
+	if version == nil or version == 0 then
+		worldedit.player_notify(name, "File is invalid!")
+		return
+	elseif version > worldedit.LATEST_SERIALIZATION_VERSION then
+		worldedit.player_notify(name, "Schematic was created with a newer version of WorldEdit.")
+		return
+	end
+
+	return value
+end
+
 
 worldedit.register_command("about", {
 	privs = {},
@@ -455,7 +488,7 @@ worldedit.register_command("fixedpos", {
 		if found == nil then
 			return false
 		end
-		return true, flag, {x=tonumber(x), y=tonumber(y), z=tonumber(z)}
+		return true, flag, vector.new(tonumber(x), tonumber(y), tonumber(z))
 	end,
 	func = function(name, flag, pos)
 		if flag == "set1" then
@@ -490,7 +523,7 @@ minetest.register_on_punchnode(function(pos, node, puncher)
 			worldedit.player_notify(name, "position 2 set to " .. minetest.pos_to_string(pos))
 		elseif worldedit.set_pos[name] == "prob" then --setting Minetest schematic node probabilities
 			worldedit.prob_pos[name] = pos
-			minetest.show_formspec(puncher:get_player_name(), "prob_val_enter", "field[text;;]")
+			minetest.show_formspec(name, "prob_val_enter", "field[text;;]")
 		end
 	end
 end)
@@ -1014,7 +1047,7 @@ worldedit.register_command("stack2", {
 			return false, "invalid increments: " .. param
 		end
 
-		return true, tonumber(repetitions), {x=tonumber(x), y=tonumber(y), z=tonumber(z)}
+		return true, tonumber(repetitions), vector.new(tonumber(x), tonumber(y), tonumber(z))
 	end,
 	nodes_needed = function(name, repetitions, offset)
 		return check_region(name) * repetitions
@@ -1186,13 +1219,16 @@ worldedit.register_command("drain", {
 		-- TODO: make an API function for this
 		local count = 0
 		local pos1, pos2 = worldedit.sort_pos(worldedit.pos1[name], worldedit.pos2[name])
+
+		local get_node, remove_node = minetest.get_node, minetest.remove_node
 		for x = pos1.x, pos2.x do
 		for y = pos1.y, pos2.y do
 		for z = pos1.z, pos2.z do
-			local n = minetest.get_node({x=x, y=y, z=z}).name
+			local p = vector.new(x, y, z)
+			local n = get_node(p).name
 			local d = minetest.registered_nodes[n]
-			if d ~= nil and (d["drawtype"] == "liquid" or d["drawtype"] == "flowingliquid") then
-				minetest.remove_node({x=x, y=y, z=z})
+			if d ~= nil and (d.drawtype == "liquid" or d.drawtype == "flowingliquid") then
+				remove_node(p)
 				count = count + 1
 			end
 		end
@@ -1230,13 +1266,15 @@ local function clearcut(pos1, pos2)
 	local count = 0
 	local prev, any
 
+	local get_node, remove_node = minetest.get_node, minetest.remove_node
 	for x = pos1.x, pos2.x do
 	for z = pos1.z, pos2.z do
 		prev = false
 		any = false
 		-- first pass: remove floating nodes that would be left over
 		for y = pos1.y, pos2.y do
-			local n = minetest.get_node({x=x, y=y, z=z}).name
+			local pos = vector.new(x, y, z)
+			local n = get_node(pos).name
 			if plants[n] then
 				prev = true
 				any = true
@@ -1244,7 +1282,7 @@ local function clearcut(pos1, pos2)
 				local def = minetest.registered_nodes[n] or {}
 				local groups = def.groups or {}
 				if groups.attached_node or (def.buildable_to and groups.falling_node) then
-					minetest.remove_node({x=x, y=y, z=z})
+					remove_node(pos)
 					count = count + 1
 				else
 					prev = false
@@ -1255,9 +1293,10 @@ local function clearcut(pos1, pos2)
 		-- second pass: remove plants, top-to-bottom to avoid item drops
 		if any then
 			for y = pos2.y, pos1.y, -1 do
-				local n = minetest.get_node({x=x, y=y, z=z}).name
+				local pos = vector.new(x, y, z)
+				local n = get_node(pos).name
 				if plants[n] then
-					minetest.remove_node({x=x, y=y, z=z})
+					remove_node(pos)
 					count = count + 1
 				end
 			end
@@ -1415,28 +1454,15 @@ worldedit.register_command("allocate", {
 	func = function(name, param)
 		local pos = worldedit.pos1[name]
 
-		local filename = minetest.get_worldpath() .. "/schems/" .. param .. ".we"
-		local file, err = io.open(filename, "rb")
-		if err ~= nil then
-			worldedit.player_notify(name, "could not open file \"" .. filename .. "\"")
-			return
+		local value = open_schematic(name, param)
+		if not value then
+			return false
 		end
-		local value = file:read("*a")
-		file:close()
 
-		local version = worldedit.read_header(value)
-		if version == nil or version == 0 then
-			worldedit.player_notify(name, "File is invalid!")
-			return
-		elseif version > worldedit.LATEST_SERIALIZATION_VERSION then
-			worldedit.player_notify(name, "File was created with newer version of WorldEdit!")
-			return
-		end
 		local nodepos1, nodepos2, count = worldedit.allocate(pos, value)
-
 		if not nodepos1 then
 			worldedit.player_notify(name, "Schematic empty, nothing allocated")
-			return
+			return false
 		end
 
 		worldedit.pos1[name] = nodepos1
@@ -1464,46 +1490,16 @@ worldedit.register_command("load", {
 	func = function(name, param)
 		local pos = worldedit.pos1[name]
 
-		if param == "" then
-			worldedit.player_notify(name, "invalid usage: " .. param)
-			return
-		end
-		if not string.find(param, "^[%w \t.,+-_=!@#$%%^&*()%[%]{};'\"]+$") then
-			worldedit.player_notify(name, "invalid file name: " .. param)
-			return
-		end
-
-		--find the file in the world path
-		local testpaths = {
-			minetest.get_worldpath() .. "/schems/" .. param,
-			minetest.get_worldpath() .. "/schems/" .. param .. ".we",
-			minetest.get_worldpath() .. "/schems/" .. param .. ".wem",
-		}
-		local file, err
-		for index, path in ipairs(testpaths) do
-			file, err = io.open(path, "rb")
-			if not err then
-				break
-			end
-		end
-		if err then
-			worldedit.player_notify(name, "could not open file \"" .. param .. "\"")
-			return
-		end
-		local value = file:read("*a")
-		file:close()
-
-		local version = worldedit.read_header(value)
-		if version == nil or version == 0 then
-			worldedit.player_notify(name, "File is invalid!")
-			return
-		elseif version > worldedit.LATEST_SERIALIZATION_VERSION then
-			worldedit.player_notify(name, "File was created with newer version of WorldEdit!")
-			return
+		local value = open_schematic(name, param)
+		if not value then
+			return false
 		end
 
 		local count = worldedit.deserialize(pos, value)
-
+		if count == nil then
+			worldedit.player_notify(name, "Loading failed!")
+			return false
+		end
 		worldedit.player_notify(name, count .. " nodes loaded")
 	end,
 })
@@ -1644,11 +1640,18 @@ worldedit.register_command("mtschemprob", {
 })
 
 minetest.register_on_player_receive_fields(function(player, formname, fields)
-	if formname == "prob_val_enter" and not (fields.text == "" or fields.text == nil) then
+	if formname == "prob_val_enter" then
 		local name = player:get_player_name()
-		local prob_entry = {pos=worldedit.prob_pos[name], prob=tonumber(fields.text)}
-		local index = table.getn(worldedit.prob_list[name]) + 1
-		worldedit.prob_list[name][index] = prob_entry
+		local problist = worldedit.prob_list[name]
+		if problist == nil then
+			return
+		end
+		local e = {pos=worldedit.prob_pos[name], prob=tonumber(fields.text)}
+		if e.pos == nil or e.prob == nil or e.prob < 0 or e.prob > 256 then
+			worldedit.player_notify(name, "invalid node probability given, not saved")
+			return
+		end
+		problist[#problist+1] = e
 	end
 end)
 

worldedit_gui/functionality.lua

@@ -11,6 +11,7 @@ local gui_count2 = {} --mapping of player names to a quantity (arbitrary strings
 local gui_count3 = {} --mapping of player names to a quantity (arbitrary strings may also appear as values)
 local gui_angle = {} --mapping of player names to an angle (one of 90, 180, 270, representing the angle in degrees clockwise)
 local gui_filename = {} --mapping of player names to file names
+local gui_param2 = {} --mapping of player names to param2 values
 
 --set default values
 setmetatable(gui_nodename1, {__index = function() return "Cobblestone" end})
@@ -25,6 +26,7 @@ setmetatable(gui_count2,     {__index = function() return "6" end})
 setmetatable(gui_count3,     {__index = function() return "4" end})
 setmetatable(gui_angle,     {__index = function() return 90 end})
 setmetatable(gui_filename,  {__index = function() return "building" end})
+setmetatable(gui_param2,    {__index = function() return "0" end})
 
 local axis_indices = {["X axis"]=1, ["Y axis"]=2, ["Z axis"]=3, ["Look direction"]=4}
 local axis_values = {"x", "y", "z", "?"}
@@ -904,3 +906,31 @@ worldedit.register_gui_function("worldedit_gui_clearobjects", {
 		execute_worldedit_command("clearobjects", name, "")
 	end,
 })
+
+worldedit.register_gui_function("worldedit_gui_param2", {
+	name = "Set Param2",
+	privs = we_privs("param2"),
+	get_formspec = function(name)
+		local value = gui_param2[name] or "0"
+		return "size[6.5,3]" .. worldedit.get_formspec_header("worldedit_gui_param2") ..
+			"textarea[0.5,1;5,2;;;Some values may break the node!]"..
+			string.format("field[0.5,2.5;2,0.8;worldedit_gui_param2_value;New Param2;%s]", minetest.formspec_escape(value)) ..
+			"field_close_on_enter[worldedit_gui_param2_value;false]" ..
+			"button_exit[3.5,2.5;3,0.8;worldedit_gui_param2_submit;Set Param2]"
+	end,
+})
+
+worldedit.register_gui_handler("worldedit_gui_param2", function(name, fields)
+	local cg = {
+		worldedit_gui_param2_value = gui_param2,
+	}
+	local ret = handle_changes(name, "worldedit_gui_param2", fields, cg)
+	if fields.worldedit_gui_param2_submit then
+		copy_changes(name, fields, cg)
+		worldedit.show_page(name, "worldedit_gui_param2")
+
+		execute_worldedit_command("param2", name, gui_param2[name])
+		return true
+	end
+	return ret
+end)

worldedit_gui/init.lua

@@ -42,7 +42,7 @@ Example:
 worldedit.register_gui_handler = function(identifier, handler)
 	local enabled = true
 	minetest.register_on_player_receive_fields(function(player, formname, fields)
-		if not enabled then return false end
+		if not enabled or formname ~= "" or fields.worldedit_gui then return false end
 		enabled = false
 		minetest.after(0.2, function() enabled = true end)
 		local name = player:get_player_name()
@@ -216,7 +216,7 @@ elseif minetest.global_exists("sfinv") then -- sfinv installed
 		end
 	end
 else
-	error(
+	return minetest.log("error",
 		"worldedit_gui requires a supported gui management mod to be installed.\n"..
 		"To use the it you need to either:\n"..
 		"* use minetest_game or another sfinv-compatible subgame\n"..