rather than copy the re-check log back into the block log when it comes

time to run through it, just use it in-place, copying its entries back
to the main block log if they have to be skipped again (essentially
using the re-check list and the end of the block log as a double buffer)

API.txt

@@ -588,3 +588,43 @@ And this particular one is mapped slightly differently from the others:
 
 (Note the +150 and +50 offsets)
 
+
+==================
+Default game nodes
+==================
+
+Although this project was intended to be used with minetest_game, it can be
+configured to work with something else instead.  All you need to do is provide
+the names of the nodes in your game you want biome_lib's internals to use.
+
+Put these settings in your game's minetest.conf (or your client's own config,
+if desired).  You'll need to set all of them.
+
+biome_lib_default_grow_through_nodes
+	Comma-separated list of things that a spawned node is allowed to grow
+	through.  Air is always added to whatever you specify.
+	Default:  air, default:snow
+
+biome_lib_default_water_nodes
+	Comma-separated list of nodes that should be treated as water for the sake
+	of looking for neighboring "wet" ground.
+	Default: default:water_source, default:water_flowing,
+		default:river_water_source, default:river_water_flowing
+
+biome_lib_default_wet_surfaces
+	Comma-separated list of nodes that should be considered "wet" if one of
+	the aforementioned water nodes is nearby.
+	Default: default:dirt, default:dirt_with_grass, default:sand
+
+biome_lib_default_grow_nodes
+	Comma-separated list of nodes that something must be sitting on to be
+	able to actively change from one thing to another (such as a sapling
+	growing into a tree), to be used for ALL growable nodes, if the calling
+	mod doesn't provide its own lists.
+	Default: "default:dirt_with_grass"
+
+biome_lib_default_ground_nodes
+	Comma-separated list of nodes to use as the "root" of something that can
+	gradually climb up a wall, to be used for ALL such nodes, if the calling
+	mod doesn't provide its own lists.
+	Default: "default:dirt_with_grass"

README.md

@@ -12,7 +12,7 @@ Both mapgen-based spawning and ABM-based spawning is supported. Growing code is
 
 It is primarily intended for mapgen v6, but it should work fine when used with mapgen v7.
 
-**Dependencies**: default from minetest_game
+**Dependencies:** nothing, but if you don't use `minetest_game`, you'll need to supply some settings (see API.txt).
 
 **Recommends**: [Plantlife Modpack](https://github.com/minetest-mods/plantlife_modpack), 
 [More Trees](https://github.com/minetest-mods/moretrees)

depends.txt

@@ -1,3 +0,0 @@
-default
-intllib?
-

growth.lua

@@ -20,8 +20,8 @@ function biome_lib:grow_plants(opts)
 	local options = opts
 
 	options.height_limit = options.height_limit or 5
-	options.ground_nodes = options.ground_nodes or { "default:dirt_with_grass" }
-	options.grow_nodes = options.grow_nodes or { "default:dirt_with_grass" }
+	options.ground_nodes = options.ground_nodes or biome_lib.default_ground_nodes
+	options.grow_nodes = options.grow_nodes or biome_lib.default_grow_nodes
 	options.seed_diff = options.seed_diff or 0
 
 	local n
@@ -55,7 +55,7 @@ function biome_lib:grow_plants(opts)
 			if options.need_wall and options.verticals_list then
 				walldir = biome_lib:find_adjacent_wall(p_top, options.verticals_list, options.choose_random_wall)
 			end
-			if (n_top.name == "air" or n_top.name == "default:snow")
+			if biome_lib.default_grow_through_nodes[n_top.name]
 			  and (not options.need_wall or (options.need_wall and walldir)) then
 				if options.grow_vertically and walldir then
 					if biome_lib:search_downward(pos, options.height_limit, options.ground_nodes) then

init.lua

@@ -1,4 +1,4 @@
--- Biome library mod by Vanessa Ezekowitz
+-- Biome library mod by VanessaE
 --
 -- I got the temperature map idea from "hmmmm", values used for it came from
 -- Splizard's snow mod.
@@ -9,28 +9,50 @@
 biome_lib = {}
 biome_lib.air = {name = "air"}
 
-plantslib = setmetatable({}, { __index=function(t,k) print("Use of deprecated function:", k) return biome_lib[k] end })
-
-biome_lib.blocklist_aircheck = {}
-biome_lib.blocklist_no_aircheck = {}
-
-biome_lib.surface_nodes_aircheck = {}
-biome_lib.surface_nodes_no_aircheck = {}
-
-biome_lib.surfaceslist_aircheck = {}
-biome_lib.surfaceslist_no_aircheck = {}
-
-biome_lib.actioncount_aircheck = {}
-biome_lib.actioncount_no_aircheck = {}
+biome_lib.block_log = {}
 
 biome_lib.actionslist_aircheck = {}
 biome_lib.actionslist_no_aircheck = {}
 
+biome_lib.surfaceslist_aircheck = {}
+biome_lib.surfaceslist_no_aircheck = {}
+
 biome_lib.modpath = minetest.get_modpath("biome_lib")
 
-biome_lib.total_no_aircheck_calls = 0
+local function tableize(s)
+	return string.split(string.trim(string.gsub(s, " ", "")))
+end
 
-biome_lib.queue_run_ratio = tonumber(minetest.settings:get("biome_lib_queue_run_ratio")) or 100
+local c1 = minetest.settings:get("biome_lib_default_grow_through_nodes")
+biome_lib.default_grow_through_nodes = {["air"] = true}
+if c1 then
+	for _, i in ipairs(tableize(c1)) do
+		biome_lib.default_grow_through_nodes[i] = true
+	end
+else
+	biome_lib.default_grow_through_nodes["default:snow"] = true
+end
+
+local c2 = minetest.settings:get("biome_lib_default_water_nodes")
+biome_lib.default_water_nodes = {}
+if c2 then
+	for _, i in ipairs(tableize(c2)) do
+		biome_lib.default_water_nodes[i] = true
+	end
+else
+	biome_lib.default_water_nodes["default:water_source"] = true
+	biome_lib.default_water_nodes["default:water_flowing"] = true
+	biome_lib.default_water_nodes["default:river_water_source"] = true
+	biome_lib.default_water_nodes["default:river_water_flowing"] = true
+end
+
+local c3 = minetest.settings:get("biome_lib_default_wet_surfaces")
+local c4 = minetest.settings:get("biome_lib_default_ground_nodes")
+local c5 = minetest.settings:get("biome_lib_default_grow_nodes")
+
+biome_lib.default_wet_surfaces = c3 and tableize(c3) or {"default:dirt", "default:dirt_with_grass", "default:sand"}
+biome_lib.default_ground_nodes = c4 and tableize(c4) or {"default:dirt_with_grass"}
+biome_lib.default_grow_nodes =   c5 and tableize(c5) or {"default:dirt_with_grass"}
 
 -- Boilerplate to support localized strings if intllib mod is installed.
 local S
@@ -45,12 +67,12 @@ else
 end
 biome_lib.intllib = S
 
-local DEBUG = false --... except if you want to spam the console with debugging info :-)
+local DEBUG = minetest.settings:get_bool("biome_lib_debug", false)
 
 function biome_lib:dbg(msg)
 	if DEBUG then
-		print("[Plantlife] "..msg)
-		minetest.log("verbose", "[Plantlife] "..msg)
+		print("[Biome Lib] "..msg)
+		minetest.log("verbose", "[Biome Lib] "..msg)
 	end
 end
 
@@ -125,7 +147,7 @@ function biome_lib:set_defaults(biome)
 	biome.near_nodes_size = biome.near_nodes_size or 0
 	biome.near_nodes_count = biome.near_nodes_count or 1
 	biome.rarity = biome.rarity or 50
-	biome.max_count = biome.max_count or 5
+	biome.max_count = biome.max_count or 125
 	if biome.check_air ~= false then biome.check_air = true end
 
 -- specific to abm spawner
@@ -295,7 +317,8 @@ local function populate_single_surface(biome, pos, perlin_fertile_area, checkair
 	return true
 end
 
-function biome_lib:populate_surfaces(biome, nodes_or_function_or_model, snodes, checkair)
+function biome_lib.populate_surfaces(biome, nodes_or_function_or_model, snodes, checkair)
+	local items_added = 0
 
 	biome_lib:set_defaults(biome)
 
@@ -316,10 +339,10 @@ function biome_lib:populate_surfaces(biome, nodes_or_function_or_model, snodes,
 	local num_in_biome_nodes = #in_biome_nodes
 
 	if num_in_biome_nodes == 0 then
-		return
+		return 0
 	end
 
-	for i = 1, math.min(biome.max_count, num_in_biome_nodes) do
+	for i = 1, math.min(math.ceil(biome.max_count/25), num_in_biome_nodes) do
 		local tries = 0
 		local spawned = false
 		while tries < 2 and not spawned do
@@ -358,13 +381,16 @@ function biome_lib:populate_surfaces(biome, nodes_or_function_or_model, snodes,
 				if objtype == "table" then
 					if nodes_or_function_or_model.axiom then
 						biome_lib:generate_tree(p_top, nodes_or_function_or_model)
+						biome_lib:dbg("An L-tree was spawned at "..minetest.pos_to_string(p_top))
 						spawned = true
 					else
 						local fdir = nil
 						if biome.random_facedir then
 							fdir = math.random(biome.random_facedir[1], biome.random_facedir[2])
 						end
-						minetest.swap_node(p_top, { name = nodes_or_function_or_model[math.random(#nodes_or_function_or_model)], param2 = fdir })
+						local n=nodes_or_function_or_model[math.random(#nodes_or_function_or_model)]
+						minetest.swap_node(p_top, { name = n, param2 = fdir })
+						biome_lib:dbg("Node \""..n.."\" was randomly picked from a list and placed at "..minetest.pos_to_string(p_top))
 						spawned = true
 					end
 				elseif objtype == "string" and
@@ -374,13 +400,16 @@ function biome_lib:populate_surfaces(biome, nodes_or_function_or_model, snodes,
 						fdir = math.random(biome.random_facedir[1], biome.random_facedir[2])
 					end
 					minetest.swap_node(p_top, { name = nodes_or_function_or_model, param2 = fdir })
+					biome_lib:dbg("Node \""..nodes_or_function_or_model.."\" was placed at "..minetest.pos_to_string(p_top))
 					spawned = true
 				elseif objtype == "function" then
 					nodes_or_function_or_model(pos)
+					biome_lib:dbg("A function was run on surface node at "..minetest.pos_to_string(pos))
 					spawned = true
 				elseif objtype == "string" and pcall(loadstring(("return %s(...)"):
 					format(nodes_or_function_or_model)),pos) then
 					spawned = true
+					biome_lib:dbg("An obsolete string-specified function was run on surface node at "..minetest.pos_to_string(p_top))
 				else
 					biome_lib:dbg("Warning: Ignored invalid definition for object "..dump(nodes_or_function_or_model).." that was pointed at {"..dump(pos).."}")
 				end
@@ -388,105 +417,135 @@ function biome_lib:populate_surfaces(biome, nodes_or_function_or_model, snodes,
 				tries = tries + 1
 			end
 		end
+		if spawned then items_added = items_added + 1 end
 	end
+	return items_added
 end
 
--- Primary mapgen spawner, for mods that can work with air checking enabled on
--- a surface during the initial map read stage.
+-- Primary log read-out/mapgen spawner
 
-function biome_lib:generate_block_with_air_checking()
-	if #biome_lib.blocklist_aircheck == 0 then
-		return
-	end
+local function confirm_block_surroundings(p)
+	local n=minetest.get_node_or_nil(p)
+	if not n or n.name == "ignore" then return false end
 
-	local minp =		biome_lib.blocklist_aircheck[1][1]
-	local maxp =		biome_lib.blocklist_aircheck[1][2]
-
-	-- use the block hash as a unique key into the surface nodes
-	-- tables, so that we can write the tables thread-safely.
-
-	local blockhash =	minetest.hash_node_position(minp)
-
-	if not biome_lib.surface_nodes_aircheck.blockhash then
-		biome_lib.surface_nodes_aircheck.blockhash =
-			minetest.find_nodes_in_area_under_air(minp, maxp, biome_lib.surfaceslist_aircheck)
-		biome_lib.actioncount_aircheck.blockhash = 1
-
-	else
-		if biome_lib.actioncount_aircheck.blockhash <= #biome_lib.actionslist_aircheck then
-			-- [1] is biome, [2] is node/function/model
-			biome_lib:populate_surfaces(
-				biome_lib.actionslist_aircheck[biome_lib.actioncount_aircheck.blockhash][1],
-				biome_lib.actionslist_aircheck[biome_lib.actioncount_aircheck.blockhash][2],
-				biome_lib.surface_nodes_aircheck.blockhash, true)
-			biome_lib.actioncount_aircheck.blockhash = biome_lib.actioncount_aircheck.blockhash + 1
-		else
-			if biome_lib.surface_nodes_aircheck.blockhash then
-				table.remove(biome_lib.blocklist_aircheck, 1)
-				biome_lib.surface_nodes_aircheck.blockhash = nil
+	for x = -32,32,64 do -- step of 64 causes it to only check the 8 corner blocks
+		for y = -32,32,64 do
+			for z = -32,32,64 do
+				local n=minetest.get_node_or_nil({x=p.x + x, y=p.y + y, z=p.z + z})
+				if not n or n.name == "ignore" then return false end
 			end
 		end
 	end
+	return true
 end
 
--- Secondary mapgen spawner, for mods that require disabling of
--- checking for air during the initial map read stage.
+biome_lib.block_recheck_list = {}
+biome_lib.run_block_recheck_list = false
 
-function biome_lib:generate_block_no_aircheck()
-	if #biome_lib.blocklist_no_aircheck == 0 then
-		return
+function biome_lib.generate_block(shutting_down)
+
+	if shutting_down then
+		if #biome_lib.block_recheck_list > 0 then
+			for i = 1, #biome_lib.block_recheck_list do
+				biome_lib.block_log[#biome_lib.block_log + 1] = biome_lib.block_recheck_list[i]
+			end
+			biome_lib.block_recheck_list = {}
+		end
+		biome_lib.run_block_recheck_list = false
+	else
+		if biome_lib.run_block_recheck_list
+		  and not biome_lib.block_recheck_list[1] then
+				biome_lib.run_block_recheck_list = false
+		end
 	end
 
-	local minp =		biome_lib.blocklist_no_aircheck[1][1]
-	local maxp =		biome_lib.blocklist_no_aircheck[1][2]
+	local blocklog = biome_lib.run_block_recheck_list
+	  and biome_lib.block_recheck_list
+	  or biome_lib.block_log
 
-	local blockhash =	minetest.hash_node_position(minp)
+	if not blocklog[1] then return end
 
-	if not biome_lib.surface_nodes_no_aircheck.blockhash then
+	local minp =		blocklog[1][1]
+	local maxp =		blocklog[1][2]
+	local airflag = 	blocklog[1][3]
+	local pos_hash = 	minetest.hash_node_position(minp)
 
-		-- directly read the block to be searched into the chunk cache
+	if not biome_lib.pos_hash then -- we need to read the maplock and get the surfaces list
+		biome_lib.pos_hash = {}
+		if not confirm_block_surroundings(minp)
+		  and not shutting_down then -- if any neighbors appear not to be loaded, skip this block for now
 
-		biome_lib.surface_nodes_no_aircheck.blockhash =
-			minetest.find_nodes_in_area(minp, maxp, biome_lib.surfaceslist_no_aircheck)
-		biome_lib.actioncount_no_aircheck.blockhash = 1
-
-	else
-		if biome_lib.actioncount_no_aircheck.blockhash <= #biome_lib.actionslist_no_aircheck then
-			biome_lib:populate_surfaces(
-				biome_lib.actionslist_no_aircheck[biome_lib.actioncount_no_aircheck.blockhash][1],
-				biome_lib.actionslist_no_aircheck[biome_lib.actioncount_no_aircheck.blockhash][2],
-				biome_lib.surface_nodes_no_aircheck.blockhash, false)
-			biome_lib.actioncount_no_aircheck.blockhash = biome_lib.actioncount_no_aircheck.blockhash + 1
-		else
-			if biome_lib.surface_nodes_no_aircheck.blockhash then
-				table.remove(biome_lib.blocklist_no_aircheck, 1)
-				biome_lib.surface_nodes_no_aircheck.blockhash = nil
+			if biome_lib.run_block_recheck_list then
+				biome_lib.block_log[#biome_lib.block_log + 1] = table.copy(biome_lib.block_recheck_list[1])
+				table.remove(biome_lib.block_recheck_list, 1)
+			else
+				biome_lib.block_recheck_list[#biome_lib.block_recheck_list + 1] = table.copy(biome_lib.block_log[1])
+				table.remove(biome_lib.block_log, 1)
 			end
+			biome_lib.pos_hash = nil
+				biome_lib:dbg("Mapblock at "..minetest.pos_to_string(minp)..
+					" had a neighbor not fully emerged, skipped it for now.")
+			return
+		else
+			biome_lib.pos_hash.surface_node_list = airflag
+				and minetest.find_nodes_in_area_under_air(minp, maxp, biome_lib.surfaceslist_aircheck)
+				or minetest.find_nodes_in_area(minp, maxp, biome_lib.surfaceslist_no_aircheck)
+			biome_lib.pos_hash.action_index = 1
+			if #biome_lib.pos_hash.surface_node_list > 0 then
+				biome_lib:dbg("Mapblock at "..minetest.pos_to_string(minp)..
+					" has "..#biome_lib.pos_hash.surface_node_list..
+					" surface nodes to work on (airflag="..dump(airflag)..")")
+			end
+		end
+	elseif not (airflag and biome_lib.actionslist_aircheck[biome_lib.pos_hash.action_index])
+	  and not (not airflag and biome_lib.actionslist_no_aircheck[biome_lib.pos_hash.action_index]) then
+		-- the block is finished, remove it
+		if #biome_lib.pos_hash.surface_node_list > 0 then
+			biome_lib:dbg("Deleted mapblock "..minetest.pos_to_string(minp).." from the block log")
+		end
+		table.remove(blocklog, 1)
+		biome_lib.pos_hash = nil
+	else
+		-- below, [1] is biome, [2] is the thing to be added
+		local added = 0
+		if airflag then
+			if biome_lib.actionslist_aircheck[biome_lib.pos_hash.action_index] then
+				added = biome_lib.populate_surfaces(
+							biome_lib.actionslist_aircheck[biome_lib.pos_hash.action_index][1],
+							biome_lib.actionslist_aircheck[biome_lib.pos_hash.action_index][2],
+							biome_lib.pos_hash.surface_node_list, true)
+				biome_lib.pos_hash.action_index = biome_lib.pos_hash.action_index + 1
+			end
+		else
+			if biome_lib.actionslist_no_aircheck[biome_lib.pos_hash.action_index] then
+				added = biome_lib.populate_surfaces(
+							biome_lib.actionslist_no_aircheck[biome_lib.pos_hash.action_index][1],
+							biome_lib.actionslist_no_aircheck[biome_lib.pos_hash.action_index][2],
+							biome_lib.pos_hash.surface_node_list, false)
+				biome_lib.pos_hash.action_index = biome_lib.pos_hash.action_index + 1
+			end
+		end
+		if added > 0 then
+			biome_lib:dbg("biome_lib.populate_surfaces ran on mapblock at "..
+				minetest.pos_to_string(minp)..".  Entry #"..
+				(biome_lib.pos_hash.action_index-1).." added "..added.." items.")
 		end
 	end
 end
 
 -- "Play" them back, populating them with new stuff in the process
 
-local step_duration = tonumber(minetest.settings:get("dedicated_server_step"))
-minetest.register_globalstep(function(dtime)
-	if dtime >= step_duration + 0.1 -- don't attempt to populate if lag is already too high
-			or math.random(100) > biome_lib.queue_run_ratio
-			or (#biome_lib.blocklist_aircheck == 0 and #biome_lib.blocklist_no_aircheck == 0) then
-		return
-	end
+local rr = tonumber(minetest.settings:get("biome_lib_queue_run_ratio")) or -100
 
-	biome_lib.globalstep_start_time = minetest.get_us_time()
-	biome_lib.globalstep_runtime = 0
-	while (#biome_lib.blocklist_aircheck > 0 or #biome_lib.blocklist_no_aircheck > 0)
-	  and biome_lib.globalstep_runtime < 200000 do  -- 0.2 seconds, in uS.
-		if #biome_lib.blocklist_aircheck > 0 then
-			biome_lib:generate_block_with_air_checking()
-		end
-		if #biome_lib.blocklist_no_aircheck > 0 then
-			biome_lib:generate_block_no_aircheck()
-		end
-		biome_lib.globalstep_runtime = minetest.get_us_time() - biome_lib.globalstep_start_time
+biome_lib.queue_run_ratio = 100 - rr
+biome_lib.entries_per_step = math.max(-rr, 1)
+
+minetest.register_globalstep(function(dtime)
+	if not biome_lib.block_log[1] then return end -- the block log is empty
+
+	if math.random(100) > biome_lib.queue_run_ratio then return end
+	for s = 1, biome_lib.entries_per_step do
+		biome_lib.generate_block()
 	end
 end)
 
@@ -494,26 +553,21 @@ end)
 -- to prevent unpopulated map areas
 
 minetest.register_on_shutdown(function()
-	if #biome_lib.blocklist_aircheck == 0 then
+	if #biome_lib.block_log + #biome_lib.block_recheck_list == 0 then
 		return
 	end
 
-	print("[biome_lib] Stand by, playing out the rest of the aircheck mapblock log")
-	print("(there are "..#biome_lib.blocklist_aircheck.." entries)...")
-	while #biome_lib.blocklist_aircheck > 0 do
-		biome_lib:generate_block_with_air_checking(0.1)
-	end
-end)
-
-minetest.register_on_shutdown(function()
-	if #biome_lib.blocklist_aircheck == 0 then
-		return
+	print("[biome_lib] Stand by, playing out the rest of the mapblock log")
+	print("(there are "..(#biome_lib.block_log + #biome_lib.block_recheck_list).." entries)...")
+	while #biome_lib.block_log > 0 do
+		biome_lib.generate_block(true)
 	end
 
-	print("[biome_lib] Stand by, playing out the rest of the no-aircheck mapblock log")
-	print("(there are "..#biome_lib.blocklist_no_aircheck.." entries)...")
-	while #biome_lib.blocklist_no_aircheck > 0 do
-		biome_lib:generate_block_no_aircheck(0.1)
+	if #biome_lib.block_recheck_list > 0 then
+		biome_lib.block_log = table.copy(biome_lib.block_recheck_list)
+		while #biome_lib.block_log > 0 do
+			biome_lib.generate_block(true)
+		end
 	end
 end)
 
@@ -622,11 +676,11 @@ function biome_lib:spawn_on_surfaces(sd,sp,sr,sc,ss,sa)
 
 			local currentsurface = minetest.get_node(pos).name
 
-			if currentsurface == "default:water_source" and
+			if biome_lib.default_water_nodes[currentsurface] and
 					#minetest.find_nodes_in_area(
 						{x=pos.x, y=pos.y-biome.depth_max-1, z=pos.z},
 						vector.new(pos),
-						{"default:dirt", "default:dirt_with_grass", "default:sand"}
+						biome_lib.default_wet_surfaces
 					) == 0 then
 				return -- On water but no ground nearby
 			end
@@ -687,12 +741,9 @@ function biome_lib:replace_object(pos, replacement, grow_function, walldir, seed
 	end
 end
 
-
 dofile(biome_lib.modpath .. "/search_functions.lua")
 assert(loadfile(biome_lib.modpath .. "/growth.lua"))(time_scale)
 
-
-
 -- Check for infinite stacks
 
 if minetest.get_modpath("unified_inventory") or not minetest.settings:get_bool("creative_mode") then
@@ -710,10 +761,24 @@ function biome_lib:get_nodedef_field(nodename, fieldname)
 	return minetest.registered_nodes[nodename][fieldname]
 end
 
+if DEBUG then
+	biome_lib.last_count = 0
+
+	function biome_lib.show_pending_block_count()
+		if biome_lib.last_count ~= #biome_lib.block_log then
+			biome_lib:dbg("Pending block count: "..(#biome_lib.block_log + #biome_lib.block_recheck_list))
+			biome_lib.last_count = #biome_lib.block_log
+		end
+		minetest.after(1, biome_lib.show_pending_block_count)
+	end
+
+	biome_lib.show_pending_block_count()
+
+	minetest.after(0, function()
+		print("Registered a total of "..(#biome_lib.surfaceslist_aircheck)+(#biome_lib.surfaceslist_no_aircheck).." surface types to be evaluated, spread")
+		print("across "..#biome_lib.actionslist_aircheck.." actions with air-checking and "..#biome_lib.actionslist_no_aircheck.." actions without.")
+	end)
+
+end
+
 print("[Biome Lib] Loaded")
-
-minetest.after(0, function()
-	print("[Biome Lib] Registered a total of "..(#biome_lib.surfaceslist_aircheck)+(#biome_lib.surfaceslist_no_aircheck).." surface types to be evaluated, spread")
-	print("[Biome Lib] across "..#biome_lib.actionslist_aircheck.." actions with air-checking and "..#biome_lib.actionslist_no_aircheck.." actions without.")
-end)
-

mod.conf

@@ -1,2 +1,3 @@
 name = biome_lib
 min_minetest_version = 5.2.0
+optional_depends = default, intllib

search_functions.lua

@@ -52,9 +52,23 @@ function biome_lib:find_open_side(pos)
 	return nil
 end
 
--- "Record" the chunks being generated by the core mapgen
+-- "Record" the map chunks being generated by the core mapgen,
+-- split into individual mapblocks to reduce lag
 
 minetest.register_on_generated(function(minp, maxp, blockseed)
-	biome_lib.blocklist_aircheck[#biome_lib.blocklist_aircheck + 1] = { minp, maxp }
-	biome_lib.blocklist_no_aircheck[#biome_lib.blocklist_no_aircheck + 1] = { minp, maxp }
+	for x = 0, 4 do
+		local minx = minp.x + x*16
+		for y = 0, 4 do
+			local miny = minp.y + y*16
+			for z = 0, 4 do
+				local minz = minp.z + z*16
+
+				local bmin = {x=minx, y=miny, z=minz}
+				local bmax = {x=minx + 15, y=miny + 15, z=minz + 15}
+				biome_lib.block_log[#biome_lib.block_log + 1] = { bmin, bmax, true }
+				biome_lib.block_log[#biome_lib.block_log + 1] = { bmin, bmax, false }
+			end
+		end
+	end
+	biome_lib.run_block_recheck_list = true
 end)