mesecons/mesecons_luacontroller/init.lua

905 lines
28 KiB
Lua
Raw Normal View History

-- ______
-- |
-- |
-- | __ ___ _ __ _ _
-- | | | | | |\ | | |_| | | | | |_ |_|
-- |___| |______ |__| | \| | | \ |__| |_ |_ |_ |\
-- |
-- |
--
-- Reference
-- ports = get_real_port_states(pos): gets if inputs are powered from outside
-- newport = merge_port_states(state1, state2): just does result = state1 or state2 for every port
-- set_port(pos, rule, state): activates/deactivates the mesecons according to the port states
-- set_port_states(pos, ports): Applies new port states to a Luacontroller at pos
-- run_inner(pos, code, event): runs code on the controller at pos and event
-- reset_formspec(pos, code, errmsg): installs new code and prints error messages, without resetting LCID
-- reset_meta(pos, code, errmsg): performs a software-reset, installs new code and prints error message
-- run(pos, event): a wrapper for run_inner which gets code & handles errors via reset_meta
-- resetn(pos): performs a hardware reset, turns off all ports
--
-- The Sandbox
-- The whole code of the controller runs in a sandbox,
-- a very restricted environment.
-- Actually the only way to damage the server is to
-- use too much memory from the sandbox.
-- You can add more functions to the environment
-- (see where local env is defined)
-- Something nice to play is is appending minetest.env to it.
local BASENAME = "mesecons_luacontroller:luacontroller"
local rules = {
a = {x = -1, y = 0, z = 0, name="A"},
b = {x = 0, y = 0, z = 1, name="B"},
c = {x = 1, y = 0, z = 0, name="C"},
d = {x = 0, y = 0, z = -1, name="D"},
}
------------------
-- Action stuff --
------------------
-- These helpers are required to set the port states of the luacontroller
local function update_real_port_states(pos, rule_name, new_state)
2014-01-10 16:38:02 +01:00
local meta = minetest.get_meta(pos)
if rule_name == nil then
2014-01-10 16:38:02 +01:00
meta:set_int("real_portstates", 1)
return
end
local n = meta:get_int("real_portstates") - 1
local L = {}
for i = 1, 4 do
L[i] = n % 2
n = math.floor(n / 2)
2014-01-10 16:38:02 +01:00
end
-- (0,-1) (-1,0) (1,0) (0,1)
local pos_to_side = { 4, 1, nil, 3, 2 }
if rule_name.x == nil then
for _, rname in ipairs(rule_name) do
local port = pos_to_side[rname.x + (2 * rname.z) + 3]
2014-01-10 16:38:02 +01:00
L[port] = (newstate == "on") and 1 or 0
end
else
local port = pos_to_side[rule_name.x + (2 * rule_name.z) + 3]
L[port] = (new_state == "on") and 1 or 0
2014-01-10 16:38:02 +01:00
end
meta:set_int("real_portstates",
1 +
1 * L[1] +
2 * L[2] +
4 * L[3] +
8 * L[4])
2014-01-10 16:38:02 +01:00
end
local port_names = {"a", "b", "c", "d"}
local function get_real_port_states(pos)
-- Determine if ports are powered (by itself or from outside)
2014-01-10 16:38:02 +01:00
local meta = minetest.get_meta(pos)
local L = {}
local n = meta:get_int("real_portstates") - 1
for _, name in ipairs(port_names) do
L[name] = ((n % 2) == 1)
n = math.floor(n / 2)
2014-01-10 16:38:02 +01:00
end
return L
end
local function merge_port_states(ports, vports)
return {
a = ports.a or vports.a,
b = ports.b or vports.b,
c = ports.c or vports.c,
d = ports.d or vports.d,
}
end
local function generate_name(ports)
local d = ports.d and 1 or 0
local c = ports.c and 1 or 0
local b = ports.b and 1 or 0
local a = ports.a and 1 or 0
return BASENAME..d..c..b..a
end
local function set_port(pos, rule, state)
if state then
mesecon.receptor_on(pos, {rule})
else
mesecon.receptor_off(pos, {rule})
end
end
local function clean_port_states(ports)
ports.a = ports.a and true or false
ports.b = ports.b and true or false
ports.c = ports.c and true or false
ports.d = ports.d and true or false
end
local function set_port_states(pos, ports)
local node = minetest.get_node(pos)
local name = node.name
clean_port_states(ports)
local vports = minetest.registered_nodes[name].virtual_portstates
local new_name = generate_name(ports)
if name ~= new_name and vports then
-- Problem:
-- We need to place the new node first so that when turning
-- off some port, it won't stay on because the rules indicate
-- there is an onstate output port there.
-- When turning the output off then, it will however cause feedback
-- so that the luacontroller will receive an "off" event by turning
-- its output off.
-- Solution / Workaround:
-- Remember which output was turned off and ignore next "off" event.
local meta = minetest.get_meta(pos)
local ign = minetest.deserialize(meta:get_string("ignore_offevents"), true) or {}
if ports.a and not vports.a and not mesecon.is_powered(pos, rules.a) then ign.A = true end
if ports.b and not vports.b and not mesecon.is_powered(pos, rules.b) then ign.B = true end
if ports.c and not vports.c and not mesecon.is_powered(pos, rules.c) then ign.C = true end
if ports.d and not vports.d and not mesecon.is_powered(pos, rules.d) then ign.D = true end
meta:set_string("ignore_offevents", minetest.serialize(ign))
minetest.swap_node(pos, {name = new_name, param2 = node.param2})
if ports.a ~= vports.a then set_port(pos, rules.a, ports.a) end
if ports.b ~= vports.b then set_port(pos, rules.b, ports.b) end
if ports.c ~= vports.c then set_port(pos, rules.c, ports.c) end
if ports.d ~= vports.d then set_port(pos, rules.d, ports.d) end
end
end
-----------------
-- Overheating --
-----------------
local function burn_controller(pos)
local node = minetest.get_node(pos)
node.name = BASENAME.."_burnt"
minetest.swap_node(pos, node)
minetest.get_meta(pos):set_string("lc_memory", "");
-- Wait for pending operations
minetest.after(0.2, mesecon.receptor_off, pos, mesecon.rules.flat)
end
local function overheat(pos, meta)
if mesecon.do_overheat(pos) then -- If too hot
burn_controller(pos)
return true
end
end
------------------------
-- Ignored off events --
------------------------
local function ignore_event(event, meta)
if event.type ~= "off" then return false end
local ignore_offevents = minetest.deserialize(meta:get_string("ignore_offevents"), true) or {}
if ignore_offevents[event.pin.name] then
ignore_offevents[event.pin.name] = nil
meta:set_string("ignore_offevents", minetest.serialize(ignore_offevents))
return true
end
end
-------------------------
-- Parsing and running --
-------------------------
local function safe_print(param)
local string_meta = getmetatable("")
local sandbox = string_meta.__index
string_meta.__index = string -- Leave string sandbox temporarily
print(dump(param))
string_meta.__index = sandbox -- Restore string sandbox
end
local function safe_date()
return(os.date("*t",os.time()))
end
-- string.rep(str, n) with a high value for n can be used to DoS
-- the server. Therefore, limit max. length of generated string.
local function safe_string_rep(str, n)
if #str * n > mesecon.setting("luacontroller_string_rep_max", 64000) then
debug.sethook() -- Clear hook
error("string.rep: string length overflow", 2)
end
return string.rep(str, n)
end
-- string.find with a pattern can be used to DoS the server.
-- Therefore, limit string.find to patternless matching.
local function safe_string_find(...)
if (select(4, ...)) ~= true then
debug.sethook() -- Clear hook
error("string.find: 'plain' (fourth parameter) must always be true in a Luacontroller")
end
return string.find(...)
end
local function remove_functions(x)
local tp = type(x)
if tp == "function" then
return nil
end
-- Make sure to not serialize the same table multiple times, otherwise
-- writing mem.test = mem in the Luacontroller will lead to infinite recursion
local seen = {}
local function rfuncs(x)
if x == nil then return end
if seen[x] then return end
seen[x] = true
if type(x) ~= "table" then return end
for key, value in pairs(x) do
if type(key) == "function" or type(value) == "function" then
x[key] = nil
else
if type(key) == "table" then
rfuncs(key)
end
if type(value) == "table" then
rfuncs(value)
end
end
end
end
rfuncs(x)
return x
end
-- The setting affects API so is not intended to be changeable at runtime
local get_interrupt
if mesecon.setting("luacontroller_lightweight_interrupts", false) then
-- use node timer
get_interrupt = function(pos, itbl, send_warning)
return (function(time, iid)
if type(time) ~= "number" then error("Delay must be a number") end
if iid ~= nil then send_warning("Interrupt IDs are disabled on this server") end
table.insert(itbl, function() minetest.get_node_timer(pos):start(time) end)
end)
end
else
-- use global action queue
-- itbl: Flat table of functions to run after sandbox cleanup, used to prevent various security hazards
get_interrupt = function(pos, itbl, send_warning)
-- iid = interrupt id
local function interrupt(time, iid)
-- NOTE: This runs within string metatable sandbox, so don't *rely* on anything of the form (""):y
-- Hence the values get moved out. Should take less time than original, so totally compatible
if type(time) ~= "number" then error("Delay must be a number") end
table.insert(itbl, function ()
-- Outside string metatable sandbox, can safely run this now
local luac_id = minetest.get_meta(pos):get_int("luac_id")
-- Check if IID is dodgy, so you can't use interrupts to store an infinite amount of data.
-- Note that this is safe from alter-after-free because this code gets run after the sandbox has ended.
-- This runs outside of the timer and *shouldn't* harm perf. unless dodgy data is being sent in the first place
iid = remove_functions(iid)
local msg_ser = minetest.serialize(iid)
if #msg_ser <= mesecon.setting("luacontroller_interruptid_maxlen", 256) then
mesecon.queue:add_action(pos, "lc_interrupt", {luac_id, iid}, time, iid, 1)
else
send_warning("An interrupt ID was too large!")
end
end)
end
return interrupt
end
end
-- Given a message object passed to digiline_send, clean it up into a form
-- which is safe to transmit over the network and compute its "cost" (a very
-- rough estimate of its memory usage).
--
-- The cleaning comprises the following:
-- 1. Functions (and userdata, though user scripts ought not to get hold of
-- those in the first place) are removed, because they break the model of
-- Digilines as a network that carries basic data, and they could exfiltrate
-- references to mutable objects from one Luacontroller to another, allowing
-- inappropriate high-bandwidth, no-wires communication.
-- 2. Tables are duplicated because, being mutable, they could otherwise be
-- modified after the send is complete in order to change what data arrives
-- at the recipient, perhaps in violation of the previous cleaning rule or
-- in violation of the message size limit.
--
-- The cost indication is only approximate; its not a perfect measurement of
-- the number of bytes of memory used by the message object.
--
-- Parameters:
-- msg -- the message to clean
-- back_references -- for internal use only; do not provide
--
-- Returns:
-- 1. The cleaned object.
-- 2. The approximate cost of the object.
local function clean_and_weigh_digiline_message(msg, back_references)
local t = type(msg)
if t == "string" then
-- Strings are immutable so can be passed by reference, and cost their
-- length plus the size of the Lua object header (24 bytes on a 64-bit
-- platform) plus one byte for the NUL terminator.
return msg, #msg + 25
elseif t == "number" then
-- Numbers are passed by value so need not be touched, and cost 8 bytes
-- as all numbers in Lua are doubles.
return msg, 8
elseif t == "boolean" then
-- Booleans are passed by value so need not be touched, and cost 1
-- byte.
return msg, 1
elseif t == "table" then
-- Tables are duplicated. Check if this table has been seen before
-- (self-referential or shared table); if so, reuse the cleaned value
-- of the previous occurrence, maintaining table topology and avoiding
-- infinite recursion, and charge zero bytes for this as the object has
-- already been counted.
back_references = back_references or {}
local bref = back_references[msg]
if bref then
return bref, 0
end
-- Construct a new table by cleaning all the keys and values and adding
-- up their costs, plus 8 bytes as a rough estimate of table overhead.
local cost = 8
local ret = {}
back_references[msg] = ret
for k, v in pairs(msg) do
local k_cost, v_cost
k, k_cost = clean_and_weigh_digiline_message(k, back_references)
v, v_cost = clean_and_weigh_digiline_message(v, back_references)
if k ~= nil and v ~= nil then
-- Only include an element if its key and value are of legal
-- types.
ret[k] = v
end
-- If we only counted the cost of a table element when we actually
-- used it, we would be vulnerable to the following attack:
-- 1. Construct a huge table (too large to pass the cost limit).
-- 2. Insert it somewhere in a table, with a function as a key.
-- 3. Insert it somewhere in another table, with a number as a key.
-- 4. The first occurrence doesnt pay the cost because functions
-- are stripped and therefore the element is dropped.
-- 5. The second occurrence doesnt pay the cost because its in
-- back_references.
-- By counting the costs regardless of whether the objects will be
-- included, we avoid this attack; it may overestimate the cost of
-- some messages, but only those that wont be delivered intact
-- anyway because they contain illegal object types.
cost = cost + k_cost + v_cost
end
return ret, cost
else
return nil, 0
end
end
-- itbl: Flat table of functions to run after sandbox cleanup, used to prevent various security hazards
local function get_digiline_send(pos, itbl, send_warning)
if not minetest.global_exists("digilines") then return end
local chan_maxlen = mesecon.setting("luacontroller_digiline_channel_maxlen", 256)
local maxlen = mesecon.setting("luacontroller_digiline_maxlen", 50000)
return function(channel, msg)
-- NOTE: This runs within string metatable sandbox, so don't *rely* on anything of the form (""):y
-- or via anything that could.
-- Make sure channel is string, number or boolean
if type(channel) == "string" then
if #channel > chan_maxlen then
send_warning("Channel string too long.")
return false
end
elseif (type(channel) ~= "string" and type(channel) ~= "number" and type(channel) ~= "boolean") then
send_warning("Channel must be string, number or boolean.")
return false
end
local msg_cost
msg, msg_cost = clean_and_weigh_digiline_message(msg)
if msg == nil or msg_cost > maxlen then
send_warning("Message was too complex, or contained invalid data.")
return false
end
table.insert(itbl, function ()
-- Runs outside of string metatable sandbox
local luac_id = minetest.get_meta(pos):get_int("luac_id")
mesecon.queue:add_action(pos, "lc_digiline_relay", {channel, luac_id, msg})
end)
return true
end
end
local safe_globals = {
-- Don't add pcall/xpcall unless willing to deal with the consequences (unless very careful, incredibly likely to allow killing server indirectly)
"assert", "error", "ipairs", "next", "pairs", "select",
"tonumber", "tostring", "type", "unpack", "_VERSION"
}
local function create_environment(pos, mem, event, itbl, send_warning)
-- Gather variables for the environment
local vports = minetest.registered_nodes[minetest.get_node(pos).name].virtual_portstates
local vports_copy = {}
for k, v in pairs(vports) do vports_copy[k] = v end
local rports = get_real_port_states(pos)
-- Create new library tables on each call to prevent one Luacontroller
-- from breaking a library and messing up other Luacontrollers.
local env = {
pin = merge_port_states(vports, rports),
port = vports_copy,
event = event,
mem = mem,
heat = mesecon.get_heat(pos),
heat_max = mesecon.setting("overheat_max", 20),
print = safe_print,
interrupt = get_interrupt(pos, itbl, send_warning),
digiline_send = get_digiline_send(pos, itbl, send_warning),
string = {
byte = string.byte,
char = string.char,
format = string.format,
len = string.len,
lower = string.lower,
upper = string.upper,
rep = safe_string_rep,
reverse = string.reverse,
sub = string.sub,
find = safe_string_find,
},
math = {
abs = math.abs,
acos = math.acos,
asin = math.asin,
atan = math.atan,
atan2 = math.atan2,
ceil = math.ceil,
cos = math.cos,
cosh = math.cosh,
deg = math.deg,
exp = math.exp,
floor = math.floor,
fmod = math.fmod,
frexp = math.frexp,
huge = math.huge,
ldexp = math.ldexp,
log = math.log,
log10 = math.log10,
max = math.max,
min = math.min,
modf = math.modf,
pi = math.pi,
pow = math.pow,
rad = math.rad,
random = math.random,
sin = math.sin,
sinh = math.sinh,
sqrt = math.sqrt,
tan = math.tan,
tanh = math.tanh,
},
table = {
concat = table.concat,
insert = table.insert,
maxn = table.maxn,
remove = table.remove,
sort = table.sort,
},
os = {
clock = os.clock,
difftime = os.difftime,
time = os.time,
datetable = safe_date,
},
}
env._G = env
for _, name in pairs(safe_globals) do
env[name] = _G[name]
end
return env
end
local function timeout()
debug.sethook() -- Clear hook
error("Code timed out!", 2)
end
local function create_sandbox(code, env)
if code:byte(1) == 27 then
return nil, "Binary code prohibited."
end
local f, msg = loadstring(code)
if not f then return nil, msg end
setfenv(f, env)
-- Turn off JIT optimization for user code so that count
-- events are generated when adding debug hooks
if rawget(_G, "jit") then
jit.off(f, true)
end
local maxevents = mesecon.setting("luacontroller_maxevents", 10000)
return function(...)
-- NOTE: This runs within string metatable sandbox, so the setting's been moved out for safety
-- Use instruction counter to stop execution
-- after luacontroller_maxevents
debug.sethook(timeout, "", maxevents)
local ok, ret = pcall(f, ...)
debug.sethook() -- Clear hook
if not ok then error(ret, 0) end
return ret
end
end
local function load_memory(meta)
return minetest.deserialize(meta:get_string("lc_memory"), true) or {}
end
local function save_memory(pos, meta, mem)
local memstring = minetest.serialize(remove_functions(mem))
local memsize_max = mesecon.setting("luacontroller_memsize", 100000)
if (#memstring <= memsize_max) then
meta:set_string("lc_memory", memstring)
meta:mark_as_private("lc_memory")
else
print("Error: Luacontroller memory overflow. "..memsize_max.." bytes available, "
..#memstring.." required. Controller overheats.")
burn_controller(pos)
end
end
-- Returns success (boolean), errmsg (string)
-- run (as opposed to run_inner) is responsible for setting up meta according to this output
local function run_inner(pos, code, event)
local meta = minetest.get_meta(pos)
-- Note: These return success, presumably to avoid changing LC ID.
if overheat(pos) then return true, "" end
if ignore_event(event, meta) then return true, "" end
-- Load code & mem from meta
local mem = load_memory(meta)
local code = meta:get_string("code")
-- 'Last warning' label.
local warning = ""
local function send_warning(str)
warning = "Warning: " .. str
end
-- Create environment
local itbl = {}
local env = create_environment(pos, mem, event, itbl, send_warning)
-- Create the sandbox and execute code
local f, msg = create_sandbox(code, env)
if not f then return false, msg end
-- Start string true sandboxing
local onetruestring = getmetatable("")
-- If a string sandbox is already up yet inconsistent, something is very wrong
assert(onetruestring.__index == string)
onetruestring.__index = env.string
local success, msg = pcall(f)
onetruestring.__index = string
-- End string true sandboxing
if not success then return false, msg end
if type(env.port) ~= "table" then
return false, "Ports set are invalid."
end
-- Actually set the ports
set_port_states(pos, env.port)
-- Save memory. This may burn the luacontroller if a memory overflow occurs.
save_memory(pos, meta, env.mem)
-- Execute deferred tasks
for _, v in ipairs(itbl) do
local failure = v()
if failure then
return false, failure
end
end
return true, warning
end
local function reset_formspec(meta, code, errmsg)
2013-03-15 22:46:59 +01:00
meta:set_string("code", code)
meta:mark_as_private("code")
code = minetest.formspec_escape(code or "")
errmsg = minetest.formspec_escape(tostring(errmsg or ""))
meta:set_string("formspec", "size[12,10]"
.."background[-0.2,-0.25;12.4,10.75;jeija_luac_background.png]"
.."label[0.1,8.3;"..errmsg.."]"
.."textarea[0.2,0.2;12.2,9.5;code;;"..code.."]"
.."image_button[4.75,8.75;2.5,1;jeija_luac_runbutton.png;program;]"
.."image_button_exit[11.72,-0.25;0.425,0.4;jeija_close_window.png;exit;]"
)
end
local function reset_meta(pos, code, errmsg)
local meta = minetest.get_meta(pos)
reset_formspec(meta, code, errmsg)
meta:set_int("luac_id", math.random(1, 65535))
end
-- Wraps run_inner with LC-reset-on-error
local function run(pos, event)
local meta = minetest.get_meta(pos)
local code = meta:get_string("code")
local ok, errmsg = run_inner(pos, code, event)
if not ok then
reset_meta(pos, code, errmsg)
else
reset_formspec(meta, code, errmsg)
end
return ok, errmsg
end
local function reset(pos)
set_port_states(pos, {a=false, b=false, c=false, d=false})
end
local function node_timer(pos)
if minetest.registered_nodes[minetest.get_node(pos).name].is_burnt then
return false
end
run(pos, {type="interrupt"})
return false
end
-----------------------
-- A.Queue callbacks --
-----------------------
mesecon.queue:add_function("lc_interrupt", function (pos, luac_id, iid)
-- There is no luacontroller anymore / it has been reprogrammed / replaced / burnt
if (minetest.get_meta(pos):get_int("luac_id") ~= luac_id) then return end
if (minetest.registered_nodes[minetest.get_node(pos).name].is_burnt) then return end
run(pos, {type="interrupt", iid = iid})
end)
mesecon.queue:add_function("lc_digiline_relay", function (pos, channel, luac_id, msg)
if not digiline then return end
-- This check is only really necessary because in case of server crash, old actions can be thrown into the future
if (minetest.get_meta(pos):get_int("luac_id") ~= luac_id) then return end
if (minetest.registered_nodes[minetest.get_node(pos).name].is_burnt) then return end
-- The actual work
digiline:receptor_send(pos, digiline.rules.default, channel, msg)
end)
-----------------------
-- Node Registration --
-----------------------
local output_rules = {}
local input_rules = {}
local node_box = {
type = "fixed",
fixed = {
{-8/16, -8/16, -8/16, 8/16, -7/16, 8/16}, -- Bottom slab
{-5/16, -7/16, -5/16, 5/16, -6/16, 5/16}, -- Circuit board
{-3/16, -6/16, -3/16, 3/16, -5/16, 3/16}, -- IC
}
}
local selection_box = {
type = "fixed",
fixed = { -8/16, -8/16, -8/16, 8/16, -5/16, 8/16 },
}
local digiline = {
receptor = {},
effector = {
action = function(pos, node, channel, msg)
msg = clean_and_weigh_digiline_message(msg)
run(pos, {type = "digiline", channel = channel, msg = msg})
end
}
}
2017-10-18 21:54:28 +02:00
local function get_program(pos)
local meta = minetest.get_meta(pos)
return meta:get_string("code")
end
local function set_program(pos, code)
reset(pos)
reset_meta(pos, code)
return run(pos, {type="program"})
2017-10-18 21:54:28 +02:00
end
local function on_receive_fields(pos, form_name, fields, sender)
if not fields.program then
return
end
local name = sender:get_player_name()
if minetest.is_protected(pos, name) and not minetest.check_player_privs(name, {protection_bypass=true}) then
minetest.record_protection_violation(pos, name)
return
end
2017-10-18 21:54:28 +02:00
local ok, err = set_program(pos, fields.code)
if not ok then
-- it's not an error from the server perspective
minetest.log("action", "Lua controller programming error: " .. tostring(err))
end
end
for a = 0, 1 do -- 0 = off 1 = on
for b = 0, 1 do
for c = 0, 1 do
for d = 0, 1 do
local cid = tostring(d)..tostring(c)..tostring(b)..tostring(a)
local node_name = BASENAME..cid
local top = "jeija_luacontroller_top.png"
if a == 1 then
top = top.."^jeija_luacontroller_LED_A.png"
end
if b == 1 then
top = top.."^jeija_luacontroller_LED_B.png"
end
if c == 1 then
top = top.."^jeija_luacontroller_LED_C.png"
end
if d == 1 then
top = top.."^jeija_luacontroller_LED_D.png"
end
local groups
if a + b + c + d ~= 0 then
groups = {dig_immediate=2, not_in_creative_inventory=1, overheat = 1}
else
groups = {dig_immediate=2, overheat = 1}
end
output_rules[cid] = {}
input_rules[cid] = {}
if a == 1 then table.insert(output_rules[cid], rules.a) end
if b == 1 then table.insert(output_rules[cid], rules.b) end
if c == 1 then table.insert(output_rules[cid], rules.c) end
if d == 1 then table.insert(output_rules[cid], rules.d) end
if a == 0 then table.insert( input_rules[cid], rules.a) end
if b == 0 then table.insert( input_rules[cid], rules.b) end
if c == 0 then table.insert( input_rules[cid], rules.c) end
if d == 0 then table.insert( input_rules[cid], rules.d) end
local mesecons = {
effector = {
rules = input_rules[cid],
action_change = function (pos, _, rule_name, new_state)
update_real_port_states(pos, rule_name, new_state)
run(pos, {type=new_state, pin=rule_name})
end,
},
receptor = {
state = mesecon.state.on,
rules = output_rules[cid]
2017-10-18 21:54:28 +02:00
},
luacontroller = {
get_program = get_program,
set_program = set_program,
},
}
minetest.register_node(node_name, {
description = "Luacontroller",
drawtype = "nodebox",
tiles = {
top,
"jeija_microcontroller_bottom.png",
"jeija_microcontroller_sides.png",
"jeija_microcontroller_sides.png",
"jeija_microcontroller_sides.png",
"jeija_microcontroller_sides.png"
},
inventory_image = top,
paramtype = "light",
2017-10-31 22:50:39 +01:00
is_ground_content = false,
groups = groups,
drop = BASENAME.."0000",
sunlight_propagates = true,
selection_box = selection_box,
node_box = node_box,
on_construct = reset_meta,
on_receive_fields = on_receive_fields,
sounds = default.node_sound_stone_defaults(),
mesecons = mesecons,
digiline = digiline,
-- Virtual portstates are the ports that
-- the node shows as powered up (light up).
virtual_portstates = {
a = a == 1,
b = b == 1,
c = c == 1,
d = d == 1,
},
after_dig_node = function (pos, node)
mesecon.do_cooldown(pos)
mesecon.receptor_off(pos, output_rules)
end,
is_luacontroller = true,
on_timer = node_timer,
2017-10-07 00:44:49 +02:00
on_blast = mesecon.on_blastnode,
})
end
end
end
end
------------------------------
-- Overheated Luacontroller --
------------------------------
minetest.register_node(BASENAME .. "_burnt", {
drawtype = "nodebox",
tiles = {
"jeija_luacontroller_burnt_top.png",
"jeija_microcontroller_bottom.png",
"jeija_microcontroller_sides.png",
"jeija_microcontroller_sides.png",
"jeija_microcontroller_sides.png",
"jeija_microcontroller_sides.png"
},
inventory_image = "jeija_luacontroller_burnt_top.png",
is_burnt = true,
paramtype = "light",
2017-10-31 22:50:39 +01:00
is_ground_content = false,
groups = {dig_immediate=2, not_in_creative_inventory=1},
drop = BASENAME.."0000",
sunlight_propagates = true,
selection_box = selection_box,
node_box = node_box,
on_construct = reset_meta,
on_receive_fields = on_receive_fields,
sounds = default.node_sound_stone_defaults(),
virtual_portstates = {a = false, b = false, c = false, d = false},
mesecons = {
effector = {
rules = mesecon.rules.flat,
action_change = function(pos, _, rule_name, new_state)
update_real_port_states(pos, rule_name, new_state)
end,
},
},
2017-10-07 00:44:49 +02:00
on_blast = mesecon.on_blastnode,
})
------------------------
-- Craft Registration --
------------------------
minetest.register_craft({
output = BASENAME.."0000 2",
recipe = {
{'mesecons_materials:silicon', 'mesecons_materials:silicon', 'group:mesecon_conductor_craftable'},
{'mesecons_materials:silicon', 'mesecons_materials:silicon', 'group:mesecon_conductor_craftable'},
{'group:mesecon_conductor_craftable', 'group:mesecon_conductor_craftable', ''},
}
})