Use table.copy in mesecons.tablecopy

mesecons.tablecopy didn’t support recursive tables, while Minetest table.copy works well for them.

.gitignore

@@ -1,3 +1 @@
 *~
-*.patch
-*.diff

mesecons/actionqueue.lua

@@ -1,140 +1,96 @@
---[[
+mesecon.queue.actions={} -- contains all ActionQueue actions
-Mesecons uses something it calls an ActionQueue.
 
-The ActionQueue holds functions and actions.
+function mesecon.queue:add_function(name, func)
-Functions are added on load time with a specified name.
+	mesecon.queue.funcs[name] = func
-Actions are preserved over server restarts.
-
-Each action consists of a position, the name of an added function to be called,
-the params that should be used in this function call (additionally to the pos),
-the time after which it should be executed, an optional overwritecheck and a
-priority.
-
-If time = 0, the action will be executed in the next globalstep, otherwise the
-earliest globalstep when it will be executed is the after next globalstep.
-
-It is guaranteed, that for two actions ac1, ac2 where ac1 ~= ac2,
-ac1.time == ac2.time, ac1.priority == ac2.priority and ac1 was added earlier
-than ac2, ac1 will be executed before ac2 (but in the same globalstep).
-
-Note: Do not pass references in params, as they can not be preserved.
-
-Also note: Some of the guarantees here might be dropped at some time.
-]]
-
-
--- localize for speed
-local queue = mesecon.queue
-
-queue.actions = {} -- contains all ActionQueue actions
-
-function queue:add_function(name, func)
-	queue.funcs[name] = func
 end
 
 -- If add_action with twice the same overwritecheck and same position are called, the first one is overwritten
 -- use overwritecheck nil to never overwrite, but just add the event to the queue
 -- priority specifies the order actions are executed within one globalstep, highest first
 -- should be between 0 and 1
-function queue:add_action(pos, func, params, time, overwritecheck, priority)
+function mesecon.queue:add_action(pos, func, params, time, overwritecheck, priority)
 	-- Create Action Table:
 	time = time or 0 -- time <= 0 --> execute, time > 0 --> wait time until execution
 	priority = priority or 1
-	local action = {
+	local action = {	pos=mesecon.tablecopy(pos),
-		pos = mesecon.tablecopy(pos),
+				func=func,
-		func = func,
+				params=mesecon.tablecopy(params or {}),
-		params = mesecon.tablecopy(params or {}),
+				time=time,
-		time = time,
+				owcheck=(overwritecheck and mesecon.tablecopy(overwritecheck)) or nil,
-		owcheck = (overwritecheck and mesecon.tablecopy(overwritecheck)) or nil,
+				priority=priority}
-		priority = priority
-	}
 
-	 -- check if old action has to be overwritten / removed:
+	local toremove = nil
-	if overwritecheck then
+	-- Otherwise, add the action to the queue
-		for i, ac in ipairs(queue.actions) do
+	if overwritecheck then -- check if old action has to be overwritten / removed:
-			if vector.equals(pos, ac.pos)
+		for i, ac in ipairs(mesecon.queue.actions) do
-					and mesecon.cmpAny(overwritecheck, ac.owcheck) then
+			if(vector.equals(pos, ac.pos)
-				-- remove the old action
+			and mesecon.cmpAny(overwritecheck, ac.owcheck)) then
-				table.remove(queue.actions, i)
+				toremove = i
 				break
 			end
 		end
 	end
 
-	table.insert(queue.actions, action)
+	if (toremove ~= nil) then
+		table.remove(mesecon.queue.actions, toremove)
+	end
+
+	table.insert(mesecon.queue.actions, action)
 end
 
 -- execute the stored functions on a globalstep
 -- if however, the pos of a function is not loaded (get_node_or_nil == nil), do NOT execute the function
--- this makes sure that resuming mesecons circuits when restarting minetest works fine (hm, where do we do this?)
+-- this makes sure that resuming mesecons circuits when restarting minetest works fine
 -- However, even that does not work in some cases, that's why we delay the time the globalsteps
--- start to be execute by 4 seconds
+-- start to be execute by 5 seconds
+local get_highest_priority = function (actions)
+	local highestp = -1
+	local highesti
+	for i, ac in ipairs(actions) do
+		if ac.priority > highestp then
+			highestp = ac.priority
+			highesti = i
+		end
+	end
 
-local function globalstep_func(dtime)
+	return highesti
-	local actions = queue.actions
+end
-	-- split into two categories:
-	-- actions_now: actions to execute now
-	-- queue.actions: actions to execute later
-	local actions_now = {}
-	queue.actions = {}
 
-	for _, ac in ipairs(actions) do
+local m_time = 0
+local resumetime = mesecon.setting("resumetime", 4)
+minetest.register_globalstep(function (dtime)
+	m_time = m_time + dtime
+	-- don't even try if server has not been running for XY seconds; resumetime = time to wait
+	-- after starting the server before processing the ActionQueue, don't set this too low
+	if (m_time < resumetime) then return end
+	local actions = mesecon.tablecopy(mesecon.queue.actions)
+	local actions_now={}
+
+	mesecon.queue.actions = {}
+
+	-- sort actions into two categories:
+	-- those toexecute now (actions_now) and those to execute later (mesecon.queue.actions)
+	for i, ac in ipairs(actions) do
 		if ac.time > 0 then
-			-- action ac is to be executed later
+			ac.time = ac.time - dtime -- executed later
-			-- ~> insert into queue.actions
+			table.insert(mesecon.queue.actions, ac)
-			ac.time = ac.time - dtime
-			table.insert(queue.actions, ac)
 		else
-			-- action ac is to be executed now
-			-- ~> insert into actions_now
 			table.insert(actions_now, ac)
 		end
 	end
 
-	-- stable-sort the executed actions after their priority
+	while(#actions_now > 0) do -- execute highest priorities first, until all are executed
-	-- some constructions might depend on the execution order, hence we first
+		local hp = get_highest_priority(actions_now)
-	-- execute the actions that had a lower index in actions_now
+		mesecon.queue:execute(actions_now[hp])
-	local old_action_order = {}
+		table.remove(actions_now, hp)
-	for i, ac in ipairs(actions_now) do
-		old_action_order[ac] = i
 	end
-	table.sort(actions_now, function(ac1, ac2)
+end)
-		if ac1.priority ~= ac2.priority then
-			return ac1.priority > ac2.priority
-		else
-			return old_action_order[ac1] < old_action_order[ac2]
-		end
-	end)
 
-	-- execute highest priorities first, until all are executed
+function mesecon.queue:execute(action)
-	for _, ac in ipairs(actions_now) do
-		queue:execute(ac)
-	end
-end
-
--- delay the time the globalsteps start to be execute by 4 seconds
-do
-	local m_time = 0
-	local resumetime = mesecon.setting("resumetime", 4)
-	local globalstep_func_index = #minetest.registered_globalsteps + 1
-
-	minetest.register_globalstep(function(dtime)
-		m_time = m_time + dtime
-		-- don't even try if server has not been running for XY seconds; resumetime = time to wait
-		-- after starting the server before processing the ActionQueue, don't set this too low
-		if m_time < resumetime then
-			return
-		end
-		-- replace this globalstep function
-		minetest.registered_globalsteps[globalstep_func_index] = globalstep_func
-	end)
-end
-
-function queue:execute(action)
 	-- ignore if action queue function name doesn't exist,
 	-- (e.g. in case the action queue savegame was written by an old mesecons version)
-	if queue.funcs[action.func] then
+	if mesecon.queue.funcs[action.func] then
-		queue.funcs[action.func](action.pos, unpack(action.params))
+		mesecon.queue.funcs[action.func](action.pos, unpack(action.params))
 	end
 end
 
@@ -142,8 +98,8 @@ end
 -- Store and read the ActionQueue to / from a file
 -- so that upcoming actions are remembered when the game
 -- is restarted
-queue.actions = mesecon.file2table("mesecon_actionqueue")
+mesecon.queue.actions = mesecon.file2table("mesecon_actionqueue")
 
 minetest.register_on_shutdown(function()
-	mesecon.table2file("mesecon_actionqueue", queue.actions)
+	mesecon.table2file("mesecon_actionqueue", mesecon.queue.actions)
 end)

mesecons/depends.txt

@@ -0,0 +1 @@
+default

mesecons/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons
-depends = default

mesecons/util.lua

@@ -193,23 +193,14 @@ function mesecon.tablecopy(obj) -- deep copy
 	return obj
 end
 
--- Returns whether two values are equal.
--- In tables, keys are compared for identity but values are compared recursively.
--- There is no protection from infinite recursion.
 function mesecon.cmpAny(t1, t2)
 	if type(t1) ~= type(t2) then return false end
-	if type(t1) ~= "table" then return t1 == t2 end
+	if type(t1) ~= "table" and type(t2) ~= "table" then return t1 == t2 end
 
-	-- Check that for each key of `t1` both tables have the same value
 	for i, e in pairs(t1) do
 		if not mesecon.cmpAny(e, t2[i]) then return false end
 	end
 
-	-- Check that all keys of `t2` are also keys of `t1` so were checked in the previous loop
-	for i, _ in pairs(t2) do
-		if t1[i] == nil then return false end
-	end
-
 	return true
 end
 

mesecons_alias/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_alias/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_alias
-depends = mesecons

mesecons_blinkyplant/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_blinkyplant/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_blinkyplant
-depends = mesecons

mesecons_button/depends.txt

@@ -0,0 +1,2 @@
+mesecons
+mesecons_receiver

mesecons_button/init.lua

@@ -8,7 +8,7 @@ mesecon.button_turnoff = function (pos)
 		return
 	end
 	minetest.swap_node(pos, {name = "mesecons_button:button_off", param2 = node.param2})
-	minetest.sound_play("mesecons_button_pop", { pos = pos }, true)
+	minetest.sound_play("mesecons_button_pop", {pos = pos})
 	local rules = mesecon.rules.buttonlike_get(node)
 	mesecon.receptor_off(pos, rules)
 end
@@ -46,7 +46,7 @@ minetest.register_node("mesecons_button:button_off", {
 	on_rightclick = function (pos, node)
 		minetest.swap_node(pos, {name = "mesecons_button:button_on", param2=node.param2})
 		mesecon.receptor_on(pos, mesecon.rules.buttonlike_get(node))
-		minetest.sound_play("mesecons_button_push", { pos = pos }, true)
+		minetest.sound_play("mesecons_button_push", {pos=pos})
 		minetest.get_node_timer(pos):start(1)
 	end,
 	sounds = default.node_sound_stone_defaults(),

mesecons_button/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_button
-depends = mesecons, mesecons_receiver

mesecons_commandblock/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_commandblock/init.lua

@@ -110,7 +110,7 @@ local function resolve_commands(commands, pos)
 	local nearest, farthest = nil, nil
 	local min_distance, max_distance = math.huge, -1
 	for index, player in pairs(players) do
-		local distance = vector.distance(pos, player:get_pos())
+		local distance = vector.distance(pos, player:getpos())
 		if distance < min_distance then
 			min_distance = distance
 			nearest = player:get_player_name()
@@ -174,8 +174,7 @@ end
 local function can_dig(pos, player)
 	local meta = minetest.get_meta(pos)
 	local owner = meta:get_string("owner")
-	return owner == "" or owner == player:get_player_name() or
+	return owner == "" or owner == player:get_player_name()
-		minetest.check_player_privs(player, "protection_bypass")
 end
 
 minetest.register_node("mesecons_commandblock:commandblock_off", {

mesecons_commandblock/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_commandblock
-depends = mesecons

mesecons_delayer/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_delayer/init.lua

@@ -33,9 +33,19 @@ end
 
 -- Register the 2 (states) x 4 (delay times) delayers
 
-local delaytime = { 0.1, 0.3, 0.5, 1.0 }
-
 for i = 1, 4 do
+local groups = {}
+if i == 1 then
+	groups = {bendy=2,snappy=1,dig_immediate=2}
+else
+	groups = {bendy=2,snappy=1,dig_immediate=2, not_in_creative_inventory=1}
+end
+
+local delaytime
+if 		i == 1 then delaytime = 0.1
+elseif	i == 2 then delaytime = 0.3
+elseif	i == 3 then delaytime = 0.5
+elseif	i == 4 then delaytime = 1.0 end
 
 local boxes = {
 	 { -6/16, -8/16, -6/16, 6/16, -7/16, 6/16 },		-- the main slab
@@ -51,9 +61,19 @@ local boxes = {
 	 { 6/16, -8/16, -1/16, 8/16, -7/16, 1/16 }
 }
 
--- Delayer definition defaults
+minetest.register_node("mesecons_delayer:delayer_off_"..tostring(i), {
-local def = {
+	description = "Delayer",
 	drawtype = "nodebox",
+	tiles = {
+		"mesecons_delayer_off_"..tostring(i)..".png",
+		"mesecons_delayer_bottom.png",
+		"mesecons_delayer_ends_off.png",
+		"mesecons_delayer_ends_off.png",
+		"mesecons_delayer_sides_off.png",
+		"mesecons_delayer_sides_off.png"
+		},
+	inventory_image = "mesecons_delayer_off_1.png",
+	wield_image = "mesecons_delayer_off_1.png",
 	walkable = true,
 	selection_box = {
 		type = "fixed",
@@ -63,46 +83,26 @@ local def = {
 		type = "fixed",
 		fixed = boxes
 	},
+	groups = groups,
 	paramtype = "light",
 	paramtype2 = "facedir",
 	sunlight_propagates = true,
 	is_ground_content = false,
-	delayer_time = delaytime[i],
+	drop = 'mesecons_delayer:delayer_off_1',
-	sounds = default.node_sound_stone_defaults(),
+	on_punch = function (pos, node)
-	on_blast = mesecon.on_blastnode,
+		if node.name=="mesecons_delayer:delayer_off_1" then
-	drop = "mesecons_delayer:delayer_off_1",
+			minetest.swap_node(pos, {name = "mesecons_delayer:delayer_off_2", param2=node.param2})
-}
+		elseif node.name=="mesecons_delayer:delayer_off_2" then
-
+			minetest.swap_node(pos, {name = "mesecons_delayer:delayer_off_3", param2=node.param2})
--- Deactivated delayer definition defaults
+		elseif node.name=="mesecons_delayer:delayer_off_3" then
-local off_groups = {bendy=2,snappy=1,dig_immediate=2}
+			minetest.swap_node(pos, {name = "mesecons_delayer:delayer_off_4", param2=node.param2})
-if i > 1 then
+		elseif node.name=="mesecons_delayer:delayer_off_4" then
-	off_groups.not_in_creative_inventory = 1
+			minetest.swap_node(pos, {name = "mesecons_delayer:delayer_off_1", param2=node.param2})
-end
-
-local off_state = {
-	description = "Delayer",
-	tiles = {
-		"mesecons_delayer_off_"..tostring(i)..".png",
-		"mesecons_delayer_bottom.png",
-		"mesecons_delayer_ends_off.png",
-		"mesecons_delayer_ends_off.png",
-		"mesecons_delayer_sides_off.png",
-		"mesecons_delayer_sides_off.png"
-	},
-	inventory_image = "mesecons_delayer_off_1.png",
-	wield_image = "mesecons_delayer_off_1.png",
-	groups = off_groups,
-	on_punch = function(pos, node, puncher)
-		if minetest.is_protected(pos, puncher and puncher:get_player_name()) then
-			return
 		end
-
-		minetest.swap_node(pos, {
-			name = "mesecons_delayer:delayer_off_"..tostring(i % 4 + 1),
-			param2 = node.param2
-		})
 	end,
+	delayer_time = delaytime,
 	delayer_onstate = "mesecons_delayer:delayer_on_"..tostring(i),
+	sounds = default.node_sound_stone_defaults(),
 	mesecons = {
 		receptor =
 		{
@@ -115,15 +115,13 @@ local off_state = {
 			action_on = delayer_activate
 		}
 	},
-}
+	on_blast = mesecon.on_blastnode,
-for k, v in pairs(def) do
+})
-	off_state[k] = off_state[k] or v
-end
-minetest.register_node("mesecons_delayer:delayer_off_"..tostring(i), off_state)
 
--- Activated delayer definition defaults
+
-local on_state = {
+minetest.register_node("mesecons_delayer:delayer_on_"..tostring(i), {
 	description = "You hacker you",
+	drawtype = "nodebox",
 	tiles = {
 		"mesecons_delayer_on_"..tostring(i)..".png",
 		"mesecons_delayer_bottom.png",
@@ -131,19 +129,36 @@ local on_state = {
 		"mesecons_delayer_ends_on.png",
 		"mesecons_delayer_sides_on.png",
 		"mesecons_delayer_sides_on.png"
+		},
+	walkable = true,
+	selection_box = {
+		type = "fixed",
+		fixed = { -8/16, -8/16, -8/16, 8/16, -6/16, 8/16 },
+	},
+	node_box = {
+		type = "fixed",
+		fixed = boxes
 	},
 	groups = {bendy = 2, snappy = 1, dig_immediate = 2, not_in_creative_inventory = 1},
-	on_punch = function(pos, node, puncher)
+	paramtype = "light",
-		if minetest.is_protected(pos, puncher and puncher:get_player_name()) then
+	paramtype2 = "facedir",
-			return
+	sunlight_propagates = true,
+	is_ground_content = false,
+	drop = 'mesecons_delayer:delayer_off_1',
+	on_punch = function (pos, node)
+		if node.name=="mesecons_delayer:delayer_on_1" then
+			minetest.swap_node(pos, {name = "mesecons_delayer:delayer_on_2", param2=node.param2})
+		elseif node.name=="mesecons_delayer:delayer_on_2" then
+			minetest.swap_node(pos, {name = "mesecons_delayer:delayer_on_3", param2=node.param2})
+		elseif node.name=="mesecons_delayer:delayer_on_3" then
+			minetest.swap_node(pos, {name = "mesecons_delayer:delayer_on_4", param2=node.param2})
+		elseif node.name=="mesecons_delayer:delayer_on_4" then
+			minetest.swap_node(pos, {name = "mesecons_delayer:delayer_on_1", param2=node.param2})
 		end
-
-		minetest.swap_node(pos, {
-			name = "mesecons_delayer:delayer_on_"..tostring(i % 4 + 1),
-			param2 = node.param2
-		})
 	end,
+	delayer_time = delaytime,
 	delayer_offstate = "mesecons_delayer:delayer_off_"..tostring(i),
+	sounds = default.node_sound_stone_defaults(),
 	mesecons = {
 		receptor =
 		{
@@ -156,12 +171,8 @@ local on_state = {
 			action_off = delayer_deactivate
 		}
 	},
-}
+	on_blast = mesecon.on_blastnode,
-for k, v in pairs(def) do
+})
-	on_state[k] = on_state[k] or v
-end
-minetest.register_node("mesecons_delayer:delayer_on_"..tostring(i), on_state)
-
 end
 
 minetest.register_craft({

mesecons_delayer/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_delayer
-depends = mesecons

mesecons_detector/depends.txt

@@ -0,0 +1,2 @@
+mesecons
+mesecons_materials

mesecons_detector/init.lua

@@ -239,7 +239,7 @@ local node_detector_digiline = {
 }
 
 local function after_place_node_detector(pos, placer)
-	local placer_pos = placer:get_pos()
+	local placer_pos = placer:getpos()
 	if not placer_pos then
 		return
 	end

mesecons_detector/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_detector
-depends = mesecons, mesecons_materials

mesecons_doors/depends.txt

@@ -0,0 +1,2 @@
+mesecons
+doors

mesecons_doors/init.lua

@@ -13,9 +13,9 @@ local function on_rightclick(pos, dir, check_name, replace, replace_dir, params)
 	minetest.swap_node(pos, {name = replace, param2 = p2})
 
 	if (minetest.get_meta(pos):get_int("right") ~= 0) == (params[1] ~= 3) then
-		minetest.sound_play("doors_door_close", { pos = pos, gain = 0.3, max_hear_distance = 10 }, true)
+		minetest.sound_play("doors_door_close", {pos = pos, gain = 0.3, max_hear_distance = 10})
 	else
-		minetest.sound_play("doors_door_open", { pos = pos, gain = 0.3, max_hear_distance = 10 }, true)
+		minetest.sound_play("doors_door_open", {pos = pos, gain = 0.3, max_hear_distance = 10})
 	end
 end
 
@@ -73,17 +73,16 @@ meseconify_door("doors:door_wood")
 meseconify_door("doors:door_steel")
 meseconify_door("doors:door_glass")
 meseconify_door("doors:door_obsidian_glass")
-meseconify_door("xpanes:door_steel_bar")
 
 -- Trapdoor
 local function trapdoor_switch(pos, node)
 	local state = minetest.get_meta(pos):get_int("state")
 
 	if state == 1 then
-		minetest.sound_play("doors_door_close", { pos = pos, gain = 0.3, max_hear_distance = 10 }, true)
+		minetest.sound_play("doors_door_close", {pos = pos, gain = 0.3, max_hear_distance = 10})
 		minetest.set_node(pos, {name="doors:trapdoor", param2 = node.param2})
 	else
-		minetest.sound_play("doors_door_open", { pos = pos, gain = 0.3, max_hear_distance = 10 }, true)
+		minetest.sound_play("doors_door_open", {pos = pos, gain = 0.3, max_hear_distance = 10})
 		minetest.set_node(pos, {name="doors:trapdoor_open", param2 = node.param2})
 	end
 
@@ -111,12 +110,6 @@ if doors and doors.get then
 	minetest.override_item("doors:trapdoor_open", override)
 	minetest.override_item("doors:trapdoor_steel", override)
 	minetest.override_item("doors:trapdoor_steel_open", override)
-
-	if minetest.registered_items["xpanes:trapdoor_steel_bar"] then
-		minetest.override_item("xpanes:trapdoor_steel_bar", override)
-		minetest.override_item("xpanes:trapdoor_steel_bar_open", override)
-	end
-
 else
 	if minetest.registered_nodes["doors:trapdoor"] then
 		minetest.override_item("doors:trapdoor", {

mesecons_doors/mod.conf

@@ -1,3 +0,0 @@
-name = mesecons_doors
-depends = mesecons, doors
-optional_depends = xpanes

mesecons_extrawires/corner.lua

@@ -1,5 +1,12 @@
 local screwdriver_exists = minetest.global_exists("screwdriver")
 
+local corner_nodebox = {
+	type = "fixed",
+	-- ±0.001 is to prevent z-fighting
+	fixed = {{ -16/32-0.001, -17/32, -3/32, 0, -13/32, 3/32 },
+		   { -3/32, -17/32, -16/32+0.001, 3/32, -13/32, 3/32}}
+}
+
 local corner_selectionbox = {
 		type = "fixed",
 		fixed = { -16/32, -16/32, -16/32, 5/32, -12/32, 5/32 },
@@ -18,11 +25,14 @@ local corner_get_rules = function (node)
 end
 
 minetest.register_node("mesecons_extrawires:corner_on", {
-	drawtype = "mesh",
+	drawtype = "nodebox",
-	mesh = "mesecons_extrawires_corner.obj",
 	tiles = {
-		{ name = "jeija_insulated_wire_sides_on.png", backface_culling = true },
+		"jeija_insulated_wire_curved_tb_on.png",
-		{ name = "jeija_insulated_wire_ends_on.png", backface_culling = true },
+		"jeija_insulated_wire_curved_tb_on.png^[transformR270",
+		"jeija_insulated_wire_sides_on.png",
+		"jeija_insulated_wire_ends_on.png",
+		"jeija_insulated_wire_sides_on.png",
+		"jeija_insulated_wire_ends_on.png"
 	},
 	paramtype = "light",
 	paramtype2 = "facedir",
@@ -45,12 +55,15 @@ minetest.register_node("mesecons_extrawires:corner_on", {
 })
 
 minetest.register_node("mesecons_extrawires:corner_off", {
-	drawtype = "mesh",
+	drawtype = "nodebox",
 	description = "Insulated Mesecon Corner",
-	mesh = "mesecons_extrawires_corner.obj",
 	tiles = {
-		{ name = "jeija_insulated_wire_sides_off.png", backface_culling = true },
+		"jeija_insulated_wire_curved_tb_off.png",
-		{ name = "jeija_insulated_wire_ends_off.png", backface_culling = true },
+		"jeija_insulated_wire_curved_tb_off.png^[transformR270",
+		"jeija_insulated_wire_sides_off.png",
+		"jeija_insulated_wire_ends_off.png",
+		"jeija_insulated_wire_sides_off.png",
+		"jeija_insulated_wire_ends_off.png"
 	},
 	paramtype = "light",
 	paramtype2 = "facedir",
@@ -74,7 +87,8 @@ minetest.register_node("mesecons_extrawires:corner_off", {
 minetest.register_craft({
 	output = "mesecons_extrawires:corner_off 3",
 	recipe = {
-		{"mesecons_insulated:insulated_off", "mesecons_insulated:insulated_off"},
+		{"", "", ""},
-		{"", "mesecons_insulated:insulated_off"},
+		{"mesecons_insulated:insulated_off", "mesecons_insulated:insulated_off", ""},
+		{"", "mesecons_insulated:insulated_off", ""},
 	}
 })

mesecons_extrawires/depends.txt

@@ -0,0 +1,3 @@
+default
+mesecons
+screwdriver?

mesecons_extrawires/doublecorner.lua

@@ -1,91 +0,0 @@
-local rotate
-if minetest.global_exists("screwdriver") then rotate = screwdriver.rotate_simple end
-
-local doublecorner_selectionbox = {
-	type = "fixed",
-	fixed = { -8/16, -8/16, -8/16, 8/16, -6/16, 8/16 },
-}
-
-local rules = {
-	{
-		{ x = 1, y = 0, z = 0 },
-		{ x = 0, y = 0, z = 1 },
-	},
-	{
-		{ x = -1, y = 0, z = 0 },
-		{ x = 0, y = 0, z = -1 },
-	},
-}
-
-local doublecorner_rules = {}
-for k = 1, 4 do
-	doublecorner_rules[k] = table.copy(rules)
-	for i, r in ipairs(rules) do
-		rules[i] = mesecon.rotate_rules_left(r)
-	end
-end
-
-local function doublecorner_get_rules(node)
-	return doublecorner_rules[node.param2 % 4 + 1]
-end
-
-local doublecorner_states = {
-	"mesecons_extrawires:doublecorner_00",
-	"mesecons_extrawires:doublecorner_01",
-	"mesecons_extrawires:doublecorner_10",
-	"mesecons_extrawires:doublecorner_11",
-}
-local wire1_states = { "off", "off", "on", "on" }
-local wire2_states = { "off", "on", "off", "on" }
-
-for k, state in ipairs(doublecorner_states) do
-	local w1 = wire1_states[k]
-	local w2 = wire2_states[k]
-	local groups =  { dig_immediate = 3 }
-	if k ~= 1 then groups.not_in_creative_inventory = 1 end
-	minetest.register_node(state, {
-		drawtype = "mesh",
-		mesh = "mesecons_extrawires_doublecorner.obj",
-		description = "Insulated Mesecon Double Corner",
-		tiles = {
-			{ name = "jeija_insulated_wire_sides_" .. w1 .. ".png", backface_culling = true },
-			{ name = "jeija_insulated_wire_ends_" .. w1 .. ".png", backface_culling = true },
-			{ name = "jeija_insulated_wire_sides_" .. w2 .. ".png", backface_culling = true },
-			{ name = "jeija_insulated_wire_ends_" .. w2 .. ".png", backface_culling = true },
-		},
-		paramtype = "light",
-		paramtype2 = "facedir",
-		is_ground_content = false,
-		walkable = false,
-		sunlight_propagates = true,
-		selection_box = doublecorner_selectionbox,
-		groups = groups,
-		drop = doublecorner_states[1],
-		sounds = default.node_sound_defaults(),
-		mesecons = {
-			conductor = {
-				states = doublecorner_states,
-				rules = doublecorner_get_rules,
-			},
-		},
-		on_blast = mesecon.on_blastnode,
-		on_rotate = rotate,
-	})
-end
-
-minetest.register_craft({
-	type = "shapeless",
-	output = "mesecons_extrawires:doublecorner_00",
-	recipe = {
-		"mesecons_extrawires:corner_off",
-		"mesecons_extrawires:corner_off",
-	},
-})
-
-minetest.register_craft({
-	type = "shapeless",
-	output = "mesecons_extrawires:corner_off 2",
-	recipe = {
-		"mesecons_extrawires:doublecorner_00",
-	},
-})

mesecons_extrawires/init.lua

@@ -1,6 +1,5 @@
 dofile(minetest.get_modpath("mesecons_extrawires").."/crossover.lua");
 dofile(minetest.get_modpath("mesecons_extrawires").."/tjunction.lua");
 dofile(minetest.get_modpath("mesecons_extrawires").."/corner.lua");
-dofile(minetest.get_modpath("mesecons_extrawires").."/doublecorner.lua");
 dofile(minetest.get_modpath("mesecons_extrawires").."/vertical.lua");
 dofile(minetest.get_modpath("mesecons_extrawires").."/mesewire.lua");

mesecons_extrawires/mod.conf

@@ -1,3 +0,0 @@
-name = mesecons_extrawires
-depends = default, mesecons
-optional_depends = screwdriver

mesecons_extrawires/models/mesecons_extrawires_corner.obj

@@ -1,125 +0,0 @@
-# Вершины
-# Провод 1
-# 1 (ниж. внутр.)
-v 0.093750 -0.531250 -0.501000
-v 0.093750 -0.531250 -0.331726
-v 0.331726 -0.531250 -0.093750
-v 0.501000 -0.531250 -0.093750
-# 5 (ниж. наруж.)
-v -0.093750 -0.531250 -0.501000
-v -0.093750 -0.531250 -0.254061
-v 0.254061 -0.531250 0.093750
-v 0.501000 -0.531250 0.093750
-# 9 (верх. внутр.)
-v 0.093750 -0.406250 -0.501000
-v 0.093750 -0.406250 -0.331726
-v 0.331726 -0.406250 -0.093750
-v 0.501000 -0.406250 -0.093750
-# 13 (верх. наруж.)
-v -0.093750 -0.406250 -0.501000
-v -0.093750 -0.406250 -0.254061
-v 0.254061 -0.406250 0.093750
-v 0.501000 -0.406250 0.093750
-# Текстурные координаты
-# 1 (ниж.)
-vt 0.000000 0.406250
-vt 0.168274 0.406250
-vt 0.331726 0.406250
-vt 0.668274 0.406250
-vt 0.831726 0.406250
-vt 1.000000 0.406250
-vt 0.000000 0.593750
-vt 0.245939 0.593750
-vt 0.254061 0.593750
-vt 0.745939 0.593750
-vt 0.754061 0.593750
-vt 1.000000 0.593750
-# 13 (верх.)
-vt 0.000000 0.406250
-vt 0.245939 0.406250
-vt 0.254061 0.406250
-vt 0.745939 0.406250
-vt 0.754061 0.406250
-vt 1.000000 0.406250
-vt 0.000000 0.593750
-vt 0.168274 0.593750
-vt 0.331726 0.593750
-vt 0.668274 0.593750
-vt 0.831726 0.593750
-vt 1.000000 0.593750
-# 25 (внутр.)
-vt 1.000000 0.093750
-vt 0.831726 0.093750
-vt 0.668274 0.093750
-vt 0.331726 0.093750
-vt 0.168274 0.093750
-vt 0.000000 0.093750
-vt 1.000000 -0.031250
-vt 0.831726 -0.031250
-vt 0.668274 -0.031250
-vt 0.331726 -0.031250
-vt 0.168274 -0.031250
-vt 0.000000 -0.031250
-# 37 (внеш.)
-vt 0.000000 -0.031250
-vt 0.245939 -0.031250
-vt 0.254061 -0.031250
-vt 0.745939 -0.031250
-vt 0.754061 -0.031250
-vt 1.000000 -0.031250
-vt 0.000000 0.093750
-vt 0.245939 0.093750
-vt 0.254061 0.093750
-vt 0.745939 0.093750
-vt 0.754061 0.093750
-vt 1.000000 0.093750
-# 49 (торец)
-vt 0.406250 -0.031250
-vt 0.406250 0.093750
-vt 0.593750 -0.031250
-vt 0.593750 0.093750
-# Нормали
-# 1
-vn 1.000000 0.000000 0.000000
-vn 0.000000 1.000000 0.000000
-vn 0.000000 0.000000 1.000000
-vn 0.707107 0.000000 0.707107
-# 5
-vn -1.000000 0.000000 0.000000
-vn 0.000000 -1.000000 0.000000
-vn 0.000000 0.000000 -1.000000
-vn -0.707107 0.000000 -0.707107
-# Грани
-g Sides1
-# Часть 1
-f 5/37/1 6/38/1 14/44/1
-f 5/37/1 14/44/1 13/43/1
-f 13/13/2 14/14/2 10/20/2
-f 13/13/2 10/20/2 9/19/2
-f 9/25/5 10/26/5 2/32/5
-f 9/25/5 2/32/5 1/31/5
-f 1/1/6 2/2/6 6/8/6
-f 1/1/6 6/8/6 5/7/6
-# Часть 2
-f 6/39/4 7/40/4 15/46/4
-f 6/39/4 15/46/4 14/45/4
-f 14/15/2 15/16/2 11/22/2
-f 14/15/2 11/22/2 10/21/2
-f 10/27/8 11/28/8 3/34/8
-f 10/27/8 3/34/8 2/33/8
-f 2/3/6 3/4/6 7/10/6
-f 2/3/6 7/10/6 6/9/6
-# Часть 3
-f 7/41/3 8/42/3 16/48/3
-f 7/41/3 16/48/3 15/47/3
-f 15/17/2 16/18/2 12/24/2
-f 15/17/2 12/24/2 11/23/2
-f 11/29/7 12/30/7 4/36/7
-f 11/29/7 4/36/7 3/35/7
-f 3/5/6 4/6/6 8/12/6
-f 3/5/6 8/12/6 7/11/6
-g Ends1
-f 1/49/3 5/51/3 13/52/3
-f 1/49/3 13/52/3 9/50/3
-f 4/49/1 12/50/1 16/52/1
-f 4/49/1 16/52/1 8/51/1

mesecons_extrawires/models/mesecons_extrawires_doublecorner.obj

@@ -1,180 +0,0 @@
-# Вершины
-# Провод 1
-# 1 (ниж. внутр.)
-v 0.093750 -0.531250 -0.501000
-v 0.093750 -0.531250 -0.331726
-v 0.331726 -0.531250 -0.093750
-v 0.501000 -0.531250 -0.093750
-# 5 (ниж. наруж.)
-v -0.093750 -0.531250 -0.501000
-v -0.093750 -0.531250 -0.254061
-v 0.254061 -0.531250 0.093750
-v 0.501000 -0.531250 0.093750
-# 9 (верх. внутр.)
-v 0.093750 -0.406250 -0.501000
-v 0.093750 -0.406250 -0.331726
-v 0.331726 -0.406250 -0.093750
-v 0.501000 -0.406250 -0.093750
-# 13 (верх. наруж.)
-v -0.093750 -0.406250 -0.501000
-v -0.093750 -0.406250 -0.254061
-v 0.254061 -0.406250 0.093750
-v 0.501000 -0.406250 0.093750
-# Провод 2
-# 17 (ниж. внутр.)
-v -0.093750 -0.531250 0.501000
-v -0.093750 -0.531250 0.331726
-v -0.331726 -0.531250 0.093750
-v -0.501000 -0.531250 0.093750
-# 21 (ниж. наруж.)
-v 0.093750 -0.531250 0.501000
-v 0.093750 -0.531250 0.254061
-v -0.254061 -0.531250 -0.093750
-v -0.501000 -0.531250 -0.093750
-# 25 (верх. внутр.)
-v -0.093750 -0.406250 0.501000
-v -0.093750 -0.406250 0.331726
-v -0.331726 -0.406250 0.093750
-v -0.501000 -0.406250 0.093750
-# 29 (верх. наруж.)
-v 0.093750 -0.406250 0.501000
-v 0.093750 -0.406250 0.254061
-v -0.254061 -0.406250 -0.093750
-v -0.501000 -0.406250 -0.093750
-# Текстурные координаты
-# 1 (ниж.)
-vt 0.000000 0.406250
-vt 0.168274 0.406250
-vt 0.331726 0.406250
-vt 0.668274 0.406250
-vt 0.831726 0.406250
-vt 1.000000 0.406250
-vt 0.000000 0.593750
-vt 0.245939 0.593750
-vt 0.254061 0.593750
-vt 0.745939 0.593750
-vt 0.754061 0.593750
-vt 1.000000 0.593750
-# 13 (верх.)
-vt 0.000000 0.406250
-vt 0.245939 0.406250
-vt 0.254061 0.406250
-vt 0.745939 0.406250
-vt 0.754061 0.406250
-vt 1.000000 0.406250
-vt 0.000000 0.593750
-vt 0.168274 0.593750
-vt 0.331726 0.593750
-vt 0.668274 0.593750
-vt 0.831726 0.593750
-vt 1.000000 0.593750
-# 25 (внутр.)
-vt 1.000000 0.093750
-vt 0.831726 0.093750
-vt 0.668274 0.093750
-vt 0.331726 0.093750
-vt 0.168274 0.093750
-vt 0.000000 0.093750
-vt 1.000000 -0.031250
-vt 0.831726 -0.031250
-vt 0.668274 -0.031250
-vt 0.331726 -0.031250
-vt 0.168274 -0.031250
-vt 0.000000 -0.031250
-# 37 (внеш.)
-vt 0.000000 -0.031250
-vt 0.245939 -0.031250
-vt 0.254061 -0.031250
-vt 0.745939 -0.031250
-vt 0.754061 -0.031250
-vt 1.000000 -0.031250
-vt 0.000000 0.093750
-vt 0.245939 0.093750
-vt 0.254061 0.093750
-vt 0.745939 0.093750
-vt 0.754061 0.093750
-vt 1.000000 0.093750
-# 49 (торец)
-vt 0.406250 -0.031250
-vt 0.406250 0.093750
-vt 0.593750 -0.031250
-vt 0.593750 0.093750
-# Нормали
-# 1
-vn 1.000000 0.000000 0.000000
-vn 0.000000 1.000000 0.000000
-vn 0.000000 0.000000 1.000000
-vn 0.707107 0.000000 0.707107
-# 5
-vn -1.000000 0.000000 0.000000
-vn 0.000000 -1.000000 0.000000
-vn 0.000000 0.000000 -1.000000
-vn -0.707107 0.000000 -0.707107
-# Грани
-# Грани
-g Sides1
-# Часть 1
-f 5/37/1 6/38/1 14/44/1
-f 5/37/1 14/44/1 13/43/1
-f 13/13/2 14/14/2 10/20/2
-f 13/13/2 10/20/2 9/19/2
-f 9/25/5 10/26/5 2/32/5
-f 9/25/5 2/32/5 1/31/5
-f 1/1/6 2/2/6 6/8/6
-f 1/1/6 6/8/6 5/7/6
-# Часть 2
-f 6/39/4 7/40/4 15/46/4
-f 6/39/4 15/46/4 14/45/4
-f 14/15/2 15/16/2 11/22/2
-f 14/15/2 11/22/2 10/21/2
-f 10/27/8 11/28/8 3/34/8
-f 10/27/8 3/34/8 2/33/8
-f 2/3/6 3/4/6 7/10/6
-f 2/3/6 7/10/6 6/9/6
-# Часть 3
-f 7/41/3 8/42/3 16/48/3
-f 7/41/3 16/48/3 15/47/3
-f 15/17/2 16/18/2 12/24/2
-f 15/17/2 12/24/2 11/23/2
-f 11/29/7 12/30/7 4/36/7
-f 11/29/7 4/36/7 3/35/7
-f 3/5/6 4/6/6 8/12/6
-f 3/5/6 8/12/6 7/11/6
-g Ends1
-f 1/49/3 5/51/3 13/52/3
-f 1/49/3 13/52/3 9/50/3
-f 4/49/1 12/50/1 16/52/1
-f 4/49/1 16/52/1 8/51/1
-g Sides2
-# Часть 1
-f 21/37/1 22/38/1 30/44/1
-f 21/37/1 30/44/1 29/43/1
-f 29/13/2 30/14/2 26/20/2
-f 29/13/2 26/20/2 25/19/2
-f 25/25/5 26/26/5 18/32/5
-f 25/25/5 18/32/5 17/31/5
-f 17/1/6 18/2/6 22/8/6
-f 17/1/6 22/8/6 21/7/6
-# Часть 2
-f 22/39/4 23/40/4 31/46/4
-f 22/39/4 31/46/4 30/45/4
-f 30/15/2 31/16/2 27/22/2
-f 30/15/2 27/22/2 26/21/2
-f 26/27/8 27/28/8 19/34/8
-f 26/27/8 19/34/8 18/33/8
-f 18/3/6 19/4/6 23/10/6
-f 18/3/6 23/10/6 22/9/6
-# Часть 3
-f 23/41/3 24/42/3 32/48/3
-f 23/41/3 32/48/3 31/47/3
-f 31/17/2 32/18/2 28/24/2
-f 31/17/2 28/24/2 27/23/2
-f 27/29/7 28/30/7 20/36/7
-f 27/29/7 20/36/7 19/35/7
-f 19/5/6 20/6/6 24/12/6
-f 19/5/6 24/12/6 23/11/6
-g Ends2
-f 17/49/3 21/51/3 29/52/3
-f 17/49/3 29/52/3 25/50/3
-f 20/49/1 28/50/1 32/52/1
-f 20/49/1 32/52/1 24/51/1

mesecons_extrawires/tjunction.lua

@@ -88,6 +88,7 @@ minetest.register_node("mesecons_extrawires:tjunction_off", {
 minetest.register_craft({
 	output = "mesecons_extrawires:tjunction_off 3",
 	recipe = {
+		{"", "", ""},
 		{"mesecons_insulated:insulated_off", "mesecons_insulated:insulated_off", "mesecons_insulated:insulated_off"},
 		{"", "mesecons_insulated:insulated_off", ""},
 	}

mesecons_fpga/depends.txt

@@ -0,0 +1,2 @@
+mesecons
+screwdriver?

mesecons_fpga/init.lua

@@ -1,11 +1,10 @@
 local plg = {}
 plg.rules = {}
--- per-player formspec positions
-plg.open_formspecs = {}
 
 local lcore = dofile(minetest.get_modpath(minetest.get_current_modname()) .. "/logic.lua")
 dofile(minetest.get_modpath(minetest.get_current_modname()) .. "/tool.lua")(plg)
 
+
 plg.register_nodes = function(template)
 	-- each loop is for one of the 4 IO ports
 	for a = 0, 1 do
@@ -94,20 +93,16 @@ plg.register_nodes({
 
 		meta:set_string("instr", lcore.serialize(is))
 		meta:set_int("valid", 0)
+		meta:set_string("formspec", plg.to_formspec_string(is))
 		meta:set_string("infotext", "FPGA")
 	end,
-	on_rightclick = function(pos, node, clicker)
+	on_receive_fields = function(pos, formname, fields, sender)
-		if not minetest.is_player(clicker) then
+		if fields.program == nil then return end -- we only care when the user clicks "Program"
-			return
-		end
 		local meta = minetest.get_meta(pos)
-		local name = clicker:get_player_name()
+		local is = plg.from_formspec_fields(fields)
-		-- Erase formspecs of old FPGAs
-		meta:set_string("formspec", "")
 
-		plg.open_formspecs[name] = pos
+		meta:set_string("instr", lcore.serialize(is))
-		local is = lcore.deserialize(meta:get_string("instr"))
+		plg.update_formspec(pos, is)
-		minetest.show_formspec(name, "mesecons:fpga", plg.to_formspec_string(is, nil))
 	end,
 	sounds = default.node_sound_stone_defaults(),
 	mesecons = {
@@ -121,12 +116,6 @@ plg.register_nodes({
 	},
 	after_dig_node = function(pos, node)
 		mesecon.receptor_off(pos, plg.rules[node.name])
-		for name, open_pos in pairs(plg.open_formspecs) do
-			if vector.equals(pos, open_pos) then
-				minetest.close_formspec(name, "mesecons:fpga")
-				plg.open_formspecs[name] = nil
-			end
-		end
 	end,
 	on_blast = mesecon.on_blastnode,
 	on_rotate = function(pos, node, user, mode)
@@ -164,12 +153,13 @@ plg.register_nodes({
 		end
 
 		meta:set_string("instr", lcore.serialize(instr))
-		plg.update_meta(pos, instr)
+		plg.update_formspec(pos, instr)
 		return true
 	end,
 })
 
-plg.to_formspec_string = function(is, err)
+
+plg.to_formspec_string = function(is)
 	local function dropdown_op(x, y, name, val)
 		local s = "dropdown[" .. tostring(x) .. "," .. tostring(y) .. ";"
 				.. "0.75,0.5;" .. name .. ";" -- the height seems to be ignored?
@@ -190,20 +180,26 @@ plg.to_formspec_string = function(is, err)
 		return s .. "]"
 	end
 	local function dropdown_action(x, y, name, val)
-		local selected = 0
+		local s = "dropdown[" .. tostring(x) .. "," .. tostring(y) .. ";"
-		local titles = { " " }
+				.. "1.125,0.5;" .. name .. ";" -- the height seems to be ignored?
-		for i, data in ipairs(lcore.get_operations()) do
+		s = s .. " , AND,  OR, NOT, XOR,NAND,   =,XNOR;"
-			titles[i + 1] = data.fs_name
+		if val == nil then
-			if val == data.gate then
+			return s .. "0]" -- actually selects no field at all
-				selected = i + 1
-			end
 		end
-		return ("dropdown[%f,%f;1.125,0.5;%s;%s;%i]"):format(
+		local mapping = {
-			x, y, name, table.concat(titles, ","), selected)
+			["and"] = 1,
+			["or"] = 2,
+			["not"] = 3,
+			["xor"] = 4,
+			["nand"] = 5,
+			["buf"] = 6,
+			["xnor"] = 7,
+		}
+		return s .. tostring(1 + mapping[val]) .. "]"
 	end
 	local s = "size[9,9]"..
 		"label[3.4,-0.15;FPGA gate configuration]"..
-		"button[7,7.5;2,2.5;program;Program]"..
+		"button_exit[7,7.5;2,2.5;program;Program]"..
 		"box[4.2,0.5;0.03,7;#ffffff]"..
 		"label[0.25,0.25;op. 1]"..
 		"label[1.0,0.25;gate type]"..
@@ -229,12 +225,6 @@ plg.to_formspec_string = function(is, err)
 			y = 1 - 0.25
 		end
 	end
-	if err then
-		local fmsg = minetest.colorize("#ff0000", minetest.formspec_escape(err.msg))
-		s = s .. plg.red_box_around(err.i) ..
-			"label[0.25,8.25;The gate configuration is erroneous in the marked area:]"..
-			"label[0.25,8.5;" .. fmsg .. "]"
-	end
 	return s
 end
 
@@ -249,11 +239,20 @@ plg.from_formspec_fields = function(fields)
 		end
 	end
 	local function read_action(s)
-		for i, data in ipairs(lcore.get_operations()) do
+		if s == nil or s == " " then
-			if data.fs_name == s then
+			return nil
-				return data.gate
-			end
 		end
+		local mapping = {
+			["AND"] = "and",
+			["OR"] = "or",
+			["NOT"] = "not",
+			["XOR"] = "xor",
+			["NAND"] = "nand",
+			["="] = "buf",
+			["XNOR"] = "xnor",
+		}
+		s = s:gsub("^%s*", "") -- remove leading spaces
+		return mapping[s]
 	end
 	local is = {}
 	for i = 1, 14 do
@@ -267,11 +266,12 @@ plg.from_formspec_fields = function(fields)
 	return is
 end
 
-plg.update_meta = function(pos, is)
+plg.update_formspec = function(pos, is)
 	if type(is) == "string" then -- serialized string
 		is = lcore.deserialize(is)
 	end
 	local meta = minetest.get_meta(pos)
+	local form = plg.to_formspec_string(is)
 
 	local err = lcore.validate(is)
 	if err == nil then
@@ -280,20 +280,17 @@ plg.update_meta = function(pos, is)
 	else
 		meta:set_int("valid", 0)
 		meta:set_string("infotext", "FPGA")
+		local fmsg = minetest.colorize("#ff0000", minetest.formspec_escape(err.msg))
+		form = form .. plg.red_box_around(err.i) ..
+			"label[0.25,8.25;The gate configuration is erroneous in the marked area:]"..
+			"label[0.25,8.5;" .. fmsg .. "]"
 	end
 
+	meta:set_string("formspec", form)
+
 	-- reset ports and run programmed logic
 	plg.setports(pos, false, false, false, false)
 	plg.update(pos)
-
-	-- Refresh open formspecs
-	local form = plg.to_formspec_string(is, err)
-	for name, open_pos in pairs(plg.open_formspecs) do
-		if vector.equals(pos, open_pos) then
-			minetest.show_formspec(name, "mesecons:fpga", form)
-		end
-	end
-	return err
 end
 
 plg.red_box_around = function(i)
@@ -412,38 +409,6 @@ plg.setports = function(pos, A, B, C, D) -- sets states of OUTPUT
 	end
 end
 
-minetest.register_on_player_receive_fields(function(player, formname, fields)
-	local player_name = player:get_player_name()
-
-	if formname ~= "mesecons:fpga" or fields.quit then
-		plg.open_formspecs[player_name] = nil -- potential garbage
-		return
-	end
-	if not fields.program then
-		return -- we only care when the user clicks "Program"
-	end
-	local pos = plg.open_formspecs[player_name]
-	if minetest.is_protected(pos, player_name) then
-		minetest.record_protection_violation(pos, player_name)
-		return
-	end
-
-	local meta = minetest.get_meta(pos)
-	local is = plg.from_formspec_fields(fields)
-
-	meta:set_string("instr", lcore.serialize(is))
-	local err = plg.update_meta(pos, is)
-
-	if not err then
-		plg.open_formspecs[player_name] = nil
-		-- Close on success
-		minetest.close_formspec(player_name, "mesecons:fpga")
-	end
-end)
-
-minetest.register_on_leaveplayer(function(player)
-	plg.open_formspecs[player:get_player_name()] = nil
-end)
 
 minetest.register_craft({
 	output = "mesecons_fpga:fpga0000 2",

mesecons_fpga/logic.lua

@@ -1,27 +1,5 @@
-
 local lg = {}
 
-local operations = {
-	-- table index: Index in the formspec dropdown
-	-- gate:    Internal name
-	-- short:   Serialized form, single character
-	-- fs_name: Display name, padded to 4 characters
-	-- func:    Function that applies the operation
-	-- unary:   Whether this gate only has one input
-	{ gate = "and",  short = "&", fs_name = " AND", func = function(a, b) return a and b end },
-	{ gate = "or",   short = "|", fs_name = "  OR", func = function(a, b) return a or b end },
-	{ gate = "not",  short = "~", fs_name = " NOT", func = function(a, b) return not b end, unary = true },
-	{ gate = "xor",  short = "^", fs_name = " XOR", func = function(a, b) return a ~= b end },
-	{ gate = "nand", short = "?", fs_name = "NAND", func = function(a, b) return not (a and b) end },
-	{ gate = "buf",  short = "_", fs_name = "   =", func = function(a, b) return b end, unary = true },
-	{ gate = "xnor", short = "=", fs_name = "XNOR", func = function(a, b) return a == b end },
-	{ gate = "nor",  short = "!", fs_name = " NOR", func = function(a, b) return not (a or b) end },
-}
-
-lg.get_operations = function()
-	return operations
-end
-
 -- (de)serialize
 lg.serialize = function(t)
 	local function _op(t)
@@ -33,14 +11,20 @@ lg.serialize = function(t)
 			return tostring(t.n)
 		end
 	end
-	-- Serialize actions (gates) from eg. "and" to "&"
+	local function _action(s)
-	local function _action(action)
+		if s == nil then
-		for i, data in ipairs(operations) do
+			return " "
-			if data.gate == action then
-				return data.short
-			end
 		end
-		return " "
+		local mapping = {
+			["and"] = "&",
+			["or"] = "|",
+			["not"] = "~",
+			["xor"] = "^",
+			["nand"] = "?", --dunno
+			["buf"] = "_",
+			["xnor"] = "=",
+		}
+		return mapping[s]
 	end
 
 	local s = ""
@@ -64,14 +48,18 @@ lg.deserialize = function(s)
 			return {type = "reg", n = tonumber(c)}
 		end
 	end
-	-- Deserialize actions (gates) from eg. "&" to "and"
+	local function _action(c)
-	local function _action(action)
+		local mapping = {
-		for i, data in ipairs(operations) do
+			["&"] = "and",
-			if data.short == action then
+			["|"] = "or",
-				return data.gate
+			["~"] = "not",
-			end
+			["^"] = "xor",
-		end
+			["?"] = "nand",
-		-- nil
+			["_"] = "buf",
+			["="] = "xnor",
+			[" "] = nil,
+		}
+		return mapping[c]
 	end
 
 	local ret = {}
@@ -121,25 +109,16 @@ lg.validate_single = function(t, i)
 		return false
 	end
 	local elem = t[i]
-
-	local gate_data
-	for j, data in ipairs(operations) do
-		if data.gate == elem.action then
-			gate_data = data
-			break
-		end
-	end
-
 	-- check for completeness
-	if not gate_data then
+	if elem.action == nil then
-		return {i = i, msg = "Gate type is required"}
+		return {i = i, msg = "Gate type required"}
-	elseif gate_data.unary then
+	elseif elem.action == "not" or elem.action == "buf" then
 		if elem.op1 ~= nil or elem.op2 == nil or elem.dst == nil then
-			return {i = i, msg = "Second operand (only) and destination are required"}
+			return {i = i, msg = "Second operand (only) and destination required"}
 		end
 	else
 		if elem.op1 == nil or elem.op2 == nil or elem.dst == nil then
-			return {i = i, msg = "Operands and destination are required"}
+			return {i = i, msg = "Operands and destination required"}
 		end
 	end
 	-- check whether operands/destination are identical
@@ -180,12 +159,21 @@ end
 -- interpreter
 lg.interpret = function(t, a, b, c, d)
 	local function _action(s, v1, v2)
-		for i, data in ipairs(operations) do
+		if s == "and" then
-			if data.gate == s then
+			return v1 and v2
-				return data.func(v1, v2)
+		elseif s == "or" then
-			end
+			return v1 or v2
+		elseif s == "not" then
+			return not v2
+		elseif s == "xor" then
+			return v1 ~= v2
+		elseif s == "nand" then
+			return not (v1 and v2)
+		elseif s == "buf" then
+			return v2
+		else -- s == "xnor"
+			return v1 == v2
 		end
-		return false -- unknown gate
 	end
 	local function _op(t, regs, io_in)
 		if t.type == "reg" then

mesecons_fpga/mod.conf

@@ -1,3 +0,0 @@
-name = mesecons_fpga
-depends = mesecons
-optional_depends = screwdriver

mesecons_fpga/tool.lua

@@ -18,13 +18,11 @@ minetest.register_tool("mesecons_fpga:programmer", {
 		local meta = minetest.get_meta(pos)
 		if meta:get_string("instr") == "//////////////" then
 			minetest.chat_send_player(placer:get_player_name(), "This FPGA is unprogrammed.")
-			minetest.sound_play("mesecons_fpga_fail", { pos = placer:get_pos(), gain = 0.1, max_hear_distance = 4 }, true)
 			return itemstack
 		end
 		itemstack:set_metadata(meta:get_string("instr"))
 		minetest.chat_send_player(placer:get_player_name(), "FPGA gate configuration was successfully copied!")
-		minetest.sound_play("mesecons_fpga_copy", { pos = placer:get_pos(), gain = 0.1, max_hear_distance = 4 }, true)
+		
-
 		return itemstack
 	end,
 	on_use = function(itemstack, user, pointed_thing)
@@ -36,24 +34,17 @@ minetest.register_tool("mesecons_fpga:programmer", {
 		if minetest.get_node(pos).name:find("mesecons_fpga:fpga") ~= 1 then
 			return itemstack
 		end
-		local player_name = user:get_player_name()
-		if minetest.is_protected(pos, player_name) then
-			minetest.record_protection_violation(pos, player_name)
-			return itemstack
-		end
 
 		local imeta = itemstack:get_metadata()
 		if imeta == "" then
-			minetest.chat_send_player(player_name, "Use shift+right-click to copy a gate configuration first.")
+			minetest.chat_send_player(user:get_player_name(), "Use shift+right-click to copy a gate configuration first.")
-			minetest.sound_play("mesecons_fpga_fail", { pos = user:get_pos(), gain = 0.1, max_hear_distance = 4 }, true)
 			return itemstack
 		end
 
 		local meta = minetest.get_meta(pos)
 		meta:set_string("instr", imeta)
-		plg.update_meta(pos, imeta)
+		plg.update_formspec(pos, imeta)
-		minetest.chat_send_player(player_name, "Gate configuration was successfully written to FPGA!")
+		minetest.chat_send_player(user:get_player_name(), "Gate configuration was successfully written to FPGA!")
-		minetest.sound_play("mesecons_fpga_write", { pos = user:get_pos(), gain = 0.1, max_hear_distance = 4 }, true)
 
 		return itemstack
 	end

mesecons_gates/depends.txt

@@ -0,0 +1,6 @@
+mesecons
+mesecons_microcontroller
+mesecons_delayer
+
+mesecons_torch
+mesecons_materials

mesecons_gates/init.lua

@@ -1,14 +1,6 @@
-local selection_box = {
-	type = "fixed",
-	fixed = { -8/16, -8/16, -8/16, 8/16, -6/16, 8/16 }
-}
-
 local nodebox = {
 	type = "fixed",
-	fixed = {
+	fixed = {{-8/16, -8/16, -8/16, 8/16, -7/16, 8/16 }},
-		{ -8/16, -8/16, -8/16, 8/16, -7/16, 8/16 }, -- bottom slab
-		{ -6/16, -7/16, -6/16, 6/16, -6/16, 6/16 }
-	},
 }
 
 local function gate_rotate_rules(node, rules)
@@ -76,7 +68,7 @@ local function register_gate(name, inputnumber, assess, recipe, description)
 		is_ground_content = false,
 		drawtype = "nodebox",
 		drop = basename.."_off",
-		selection_box = selection_box,
+		selection_box = nodebox,
 		node_box = nodebox,
 		walkable = true,
 		sounds = default.node_sound_stone_defaults(),
@@ -86,16 +78,8 @@ local function register_gate(name, inputnumber, assess, recipe, description)
 		inputnumber = inputnumber,
 		after_dig_node = mesecon.do_cooldown,
 	},{
-		tiles = {
+		tiles = {"jeija_microcontroller_bottom.png^".."jeija_gate_off.png^"..
-			"jeija_microcontroller_bottom.png^".."jeija_gate_off.png^"..
+			"jeija_gate_"..name..".png"},
-			"jeija_gate_output_off.png^".."jeija_gate_"..name..".png",
-			"jeija_microcontroller_bottom.png^".."jeija_gate_output_off.png^"..
-			"[transformFY",
-			"jeija_gate_side.png^".."jeija_gate_side_output_off.png",
-			"jeija_gate_side.png",
-			"jeija_gate_side.png",
-			"jeija_gate_side.png"
-		},
 		groups = {dig_immediate = 2, overheat = 1},
 		mesecons = { receptor = {
 			state = "off",
@@ -105,16 +89,8 @@ local function register_gate(name, inputnumber, assess, recipe, description)
 			action_change = update_gate
 		}}
 	},{
-		tiles = {
+		tiles = {"jeija_microcontroller_bottom.png^".."jeija_gate_on.png^"..
-			"jeija_microcontroller_bottom.png^".."jeija_gate_on.png^"..
+			"jeija_gate_"..name..".png"},
-			"jeija_gate_output_on.png^".."jeija_gate_"..name..".png",
-			"jeija_microcontroller_bottom.png^".."jeija_gate_output_on.png^"..
-			"[transformFY",
-			"jeija_gate_side.png^".."jeija_gate_side_output_on.png",
-			"jeija_gate_side.png",
-			"jeija_gate_side.png",
-			"jeija_gate_side.png"
-		},
 		groups = {dig_immediate = 2, not_in_creative_inventory = 1, overheat = 1},
 		mesecons = { receptor = {
 			state = "on",

mesecons_gates/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_gates
-depends = mesecons, mesecons_microcontroller, mesecons_delayer, mesecons_torch, mesecons_materials

mesecons_hydroturbine/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_hydroturbine/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_hydroturbine
-depends = mesecons

mesecons_insulated/depends.txt

@@ -0,0 +1,2 @@
+mesecons
+screwdriver?

mesecons_insulated/mod.conf

@@ -1,3 +0,0 @@
-name = mesecons_insulated
-depends = mesecons
-optional_depends = screwdriver

mesecons_lamp/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_lamp/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_lamp
-depends = mesecons

mesecons_lightstone/depends.txt

@@ -0,0 +1,2 @@
+mesecons
+dye

mesecons_lightstone/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_lightstone
-depends = mesecons, dye

mesecons_luacontroller/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_luacontroller/init.lua

@@ -266,46 +266,6 @@ local function remove_functions(x)
 	return x
 end
 
-local function validate_iid(iid)
-	if not iid then return true end -- nil is OK
-
-	local limit = mesecon.setting("luacontroller_interruptid_maxlen", 256)
-	if type(iid) == "string" then
-		if #iid <= limit then return true end -- string is OK unless too long
-		return false, "An interrupt ID was too large!"
-	end
-	if type(iid) == "number" or type(iid) == "boolean" then return true, "Non-string interrupt IDs are deprecated" end
-
-	local warn
-	local seen = {}
-	local function check(t)
-		if type(t) == "function" then
-			warn = "Functions cannot be used in interrupt IDs"
-			return false
-		end
-		if type(t) ~= "table" then
-			return true
-		end
-		if seen[t] then
-			warn = "Non-tree-like tables are forbidden as interrupt IDs"
-			return false
-		end
-		seen[t] = true
-		for k, v in pairs(t) do
-			if not check(k) then return false end
-			if not check(v) then return false end
-		end
-		return true
-	end
-	if not check(iid) then return false, warn end
-
-	if #minetest.serialize(iid) > limit then
-		return false, "An interrupt ID was too large!"
-	end
-
-	return true, "Table interrupt IDs are deprecated and are unreliable; use strings instead"
-end
-
 -- The setting affects API so is not intended to be changeable at runtime
 local get_interrupt
 if mesecon.setting("luacontroller_lightweight_interrupts", false) then
@@ -322,18 +282,26 @@ else
 	-- itbl: Flat table of functions to run after sandbox cleanup, used to prevent various security hazards
 	get_interrupt = function(pos, itbl, send_warning)
 		-- iid = interrupt id
-		return function (time, iid)
+		local function interrupt(time, iid)
 			-- NOTE: This runs within string metatable sandbox, so don't *rely* on anything of the form (""):y
 			-- Hence the values get moved out. Should take less time than original, so totally compatible
 			if type(time) ~= "number" then error("Delay must be a number") end
 			table.insert(itbl, function ()
 				-- Outside string metatable sandbox, can safely run this now
 				local luac_id = minetest.get_meta(pos):get_int("luac_id")
-				local ok, warn = validate_iid(iid)
+				-- Check if IID is dodgy, so you can't use interrupts to store an infinite amount of data.
-				if ok then mesecon.queue:add_action(pos, "lc_interrupt", {luac_id, iid}, time, iid, 1) end
+				-- Note that this is safe from alter-after-free because this code gets run after the sandbox has ended.
-				if warn then send_warning(warn) end
+				-- This runs outside of the timer and *shouldn't* harm perf. unless dodgy data is being sent in the first place
+				iid = remove_functions(iid)
+				local msg_ser = minetest.serialize(iid)
+				if #msg_ser <= mesecon.setting("luacontroller_interruptid_maxlen", 256) then
+					mesecon.queue:add_action(pos, "lc_interrupt", {luac_id, iid}, time, iid, 1)
+				else
+					send_warning("An interrupt ID was too large!")
+				end
 			end)
 		end
+		return interrupt
 	end
 end
 
@@ -664,7 +632,6 @@ local function reset_formspec(meta, code, errmsg)
 	code = minetest.formspec_escape(code or "")
 	errmsg = minetest.formspec_escape(tostring(errmsg or ""))
 	meta:set_string("formspec", "size[12,10]"
-		.."style_type[label,textarea;font=mono]"
 		.."background[-0.2,-0.25;12.4,10.75;jeija_luac_background.png]"
 		.."label[0.1,8.3;"..errmsg.."]"
 		.."textarea[0.2,0.2;12.2,9.5;code;;"..code.."]"
@@ -934,3 +901,4 @@ minetest.register_craft({
 		{'group:mesecon_conductor_craftable', 'group:mesecon_conductor_craftable', ''},
 	}
 })
+

mesecons_luacontroller/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_luacontroller
-depends = mesecons

mesecons_materials/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_materials/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_materials
-depends = mesecons

mesecons_microcontroller/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_microcontroller/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_microcontroller
-depends = mesecons

mesecons_movestones/depends.txt

@@ -0,0 +1,3 @@
+mesecons
+mesecons_materials
+mesecons_mvps

mesecons_movestones/init.lua

@@ -66,7 +66,6 @@ function mesecon.register_movestone(name, def, is_sticky, is_vertical)
 		mesecon.on_dignode(pos, node)
 		mesecon.on_placenode(frontpos, node)
 		minetest.get_node_timer(frontpos):start(timer_interval)
-		minetest.sound_play("movestone", { pos = pos, max_hear_distance = 20, gain = 0.5 }, true)
 
 		-- ### Step 3: If sticky, pull stack behind ###
 		if is_sticky then

mesecons_movestones/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_movestones
-depends = mesecons, mesecons_materials, mesecons_mvps

mesecons_mvps/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_mvps/init.lua

@@ -29,9 +29,6 @@ function mesecon.is_mvps_stopper(node, pushdir, stack, stackid)
 end
 
 function mesecon.register_mvps_stopper(nodename, get_stopper)
-	if minetest.registered_nodes[nodename] and minetest.registered_nodes[nodename].buildable_to then
-		minetest.log("warning", ("Registering a buildable-to node \"%s\" as a mesecon stopper, this is not supported"):format(nodename))
-	end
 	if get_stopper == nil then
 			get_stopper = true
 	end
@@ -74,10 +71,6 @@ function mesecon.mvps_get_stack(pos, dir, maximum, all_pull_sticky)
 		local np = frontiers[1]
 		local nn = minetest.get_node(np)
 
-		-- Never push into unloaded blocks. Don’t try to pull from them, either.
-		-- TODO: load blocks instead, as with wires.
-		if nn.name == "ignore" then return nil end
-
 		if not node_replaceable(nn.name) then
 			table.insert(nodes, {node = nn, pos = np})
 			if #nodes > maximum then return nil end
@@ -170,7 +163,7 @@ local function add_pos(positions, pos)
 end
 
 local function are_protected(positions, player_name)
-	local mode = mesecon.setting("mvps_protection_mode", "compat")
+	local mode = mesecon.setting("mvps_protection_mode", "normal")
 	if mode == "ignore" then
 		return false
 	end
@@ -292,7 +285,7 @@ function mesecon.mvps_move_objects(pos, dir, nodestack, movefactor)
 	end
 	movefactor = movefactor or 1
 	dir = vector.multiply(dir, movefactor)
-	for id, obj in pairs(minetest.get_objects_inside_radius(pos, #nodestack + 1)) do
+	for id, obj in pairs(minetest.object_refs) do
 		local obj_pos = obj:get_pos()
 		local cbox = obj:get_properties().collisionbox
 		local min_pos = vector.add(obj_pos, vector.new(cbox[1], cbox[2], cbox[3]))
@@ -334,6 +327,10 @@ function mesecon.mvps_move_objects(pos, dir, nodestack, movefactor)
 	end
 end
 
+-- Never push into unloaded blocks. Don’t try to pull from them, either.
+-- TODO: load blocks instead, as with wires.
+mesecon.register_mvps_stopper("ignore")
+
 mesecon.register_mvps_stopper("doors:door_steel_b_1")
 mesecon.register_mvps_stopper("doors:door_steel_t_1")
 mesecon.register_mvps_stopper("doors:door_steel_b_2")

mesecons_mvps/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_mvps
-depends = mesecons

mesecons_noteblock/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_noteblock/doc/noteblock/description.html

@@ -1,13 +1,12 @@
-This effector makes a sound if powered and can be used for making music. Normally it makes piano sounds. The sound frequency can be changed by punching the block (only works for piano). There are some special sounds that depend on the block below:
+This effector makes a sound if powered and can be used for making music. Normally it makes piano sounds. The sound frequency can be changed by punching the block. There are some special sounds that depend on the block below:
 <table colspace="5">
 <tr><th>Block Below</th><th>Effect</th></tr>
-<tr><td>Glass or Obsidian Glass</td><td>Hi-hat</td></tr>
+<tr><td>Glass</td><td>Hihat</td></tr>
-<tr><td>Any stone</td><td>Kick</td></tr>
+<tr><td>Stone</td><td>Kick</td></tr>
-<tr><td>Chest or Locked Chest</td><td>Snare</td></tr>
+<tr><td>Chest</td><td>Snare</td></tr>
-<tr><td>Any tree</td><td>Crash</td></tr>
+<tr><td>Tree</td><td>Crash</td></tr>
-<tr><td>Any wooden planks</td><td>Lite Crash</td></tr>
+<tr><td>Wood</td><td>Lite Crash</td></tr>
-<tr><td>Coal Block</td><td>Explosion sound</td></tr>
+<tr><td>Coal Block</td><td>Explosion Sound </td></tr>
-<tr><td>Lava Source</td><td>Fire sound</td></tr>
+<tr><td>Lava Source</td><td>Fire Sound</td></tr>
-<tr><td>Steel Block</td><td>Piano (high pitch, one octave higher than normal)</td></tr>
+<tr><td>Steel Block</td><td>Raises the pitch by one octave</td></tr>
-<tr><td>Any other block</td><td>Piano (low pitch)</td></tr>
 </table>

mesecons_noteblock/init.lua

@@ -43,33 +43,19 @@ local soundnames = {
 }
 
 local node_sounds = {
+	["default:glass"] = "mesecons_noteblock_hihat",
+	["default:stone"] = "mesecons_noteblock_kick",
 	["default:lava_source"] = "fire_fire",
 	["default:chest"] = "mesecons_noteblock_snare",
-	["default:chest_locked"] = "mesecons_noteblock_snare",
+	["default:tree"] = "mesecons_noteblock_crash",
+	["default:wood"] = "mesecons_noteblock_litecrash",
 	["default:coalblock"] = "tnt_explode",
-	["default:glass"] = "mesecons_noteblock_hihat",
-	["default:obsidian_glass"] = "mesecons_noteblock_hihat",
-}
-
-local node_sounds_group = {
-	["stone"] = "mesecons_noteblock_kick",
-	["tree"] = "mesecons_noteblock_crash",
-	["wood"] = "mesecons_noteblock_litecrash",
 }
 
 mesecon.noteblock_play = function(pos, param2)
 	pos.y = pos.y-1
 	local nodeunder = minetest.get_node(pos).name
 	local soundname = node_sounds[nodeunder]
-	if not soundname then
-		for k,v in pairs(node_sounds_group) do
-			local g = minetest.get_item_group(nodeunder, k)
-			if g ~= 0 then
-				soundname = v
-				break
-			end
-		end
-	end
 	if not soundname then
 		soundname = soundnames[param2]
 		if not soundname then
@@ -81,11 +67,5 @@ mesecon.noteblock_play = function(pos, param2)
 		end
 	end
 	pos.y = pos.y+1
-	if soundname == "fire_fire" then
+	minetest.sound_play(soundname, {pos = pos})
-		-- Smoothly fade out fire sound
-		local handle = minetest.sound_play(soundname, {pos = pos, loop = true})
-		minetest.after(3.0, minetest.sound_fade, handle, -1.5, 0.0)
-	else
-		minetest.sound_play(soundname, {pos = pos}, true)
-	end
 end

mesecons_noteblock/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_noteblock
-depends = mesecons

mesecons_pistons/depends.txt

@@ -0,0 +1,2 @@
+mesecons
+mesecons_mvps

mesecons_pistons/init.lua

@@ -67,7 +67,11 @@ local function piston_remove_pusher(pos, node, check_falling)
 	end
 
 	minetest.remove_node(pusherpos)
-	minetest.sound_play("piston_retract", { pos = pos, max_hear_distance = 20, gain = 0.3 }, true)
+	minetest.sound_play("piston_retract", {
+		pos = pos,
+		max_hear_distance = 20,
+		gain = 0.3,
+	})
 
 	if check_falling then
 		minetest.check_for_falling(pusherpos)
@@ -92,7 +96,11 @@ local piston_on = function(pos, node)
 	end
 	minetest.swap_node(pos, {param2 = node.param2, name = pistonspec.onname})
 	minetest.set_node(pusher_pos, {param2 = node.param2, name = pistonspec.pusher})
-	minetest.sound_play("piston_extend", { pos = pos, max_hear_distance = 20, gain = 0.3 }, true)
+	minetest.sound_play("piston_extend", {
+		pos = pos,
+		max_hear_distance = 20,
+		gain = 0.3,
+	})
 	mesecon.mvps_process_stack(stack)
 	mesecon.mvps_move_objects(pusher_pos, dir, oldstack)
 end

mesecons_pistons/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_pistons
-depends = mesecons, mesecons_mvps

mesecons_powerplant/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_powerplant/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_powerplant
-depends = mesecons

mesecons_pressureplates/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_pressureplates/init.lua

@@ -24,7 +24,7 @@ local function pp_on_timer(pos, elapsed)
 		mesecon.receptor_off(pos, mesecon.rules.pplate)
 	elseif node.name == basename .. "_off" then
 		for k, obj in pairs(objs) do
-			local objpos = obj:get_pos()
+			local objpos = obj:getpos()
 			if objpos.y > pos.y-1 and objpos.y < pos.y then
 				minetest.set_node(pos, {name = basename .. "_on"})
 				mesecon.receptor_on(pos, mesecon.rules.pplate )

mesecons_pressureplates/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_pressureplates
-depends = mesecons

mesecons_random/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_random/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_random
-depends = mesecons

mesecons_receiver/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_receiver/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_receiver
-depends = mesecons

mesecons_solarpanel/depends.txt

@@ -0,0 +1,2 @@
+mesecons
+mesecons_materials

mesecons_solarpanel/init.lua

@@ -1,60 +1,98 @@
 -- Solar Panel
-mesecon.register_node("mesecons_solarpanel:solar_panel", {
+minetest.register_node("mesecons_solarpanel:solar_panel_on", {
-	description = "Solar Panel",
 	drawtype = "nodebox",
-	tiles = {"mesecons_solarpanel.png"},
+	tiles = { "jeija_solar_panel.png", },
-	inventory_image = "mesecons_solarpanel.png",
+	inventory_image = "jeija_solar_panel.png",
-	wield_image = "mesecons_solarpanel.png",
+	wield_image = "jeija_solar_panel.png",
 	paramtype = "light",
 	paramtype2 = "wallmounted",
 	walkable = false,
 	is_ground_content = false,
 	node_box = {
 		type = "wallmounted",
-		wall_bottom = {-7/16, -8/16, -7/16,  7/16, -7/16, 7/16},
+		wall_bottom = { -7/16, -8/16, -7/16,  7/16, -7/16, 7/16 },
-		wall_top    = {-7/16,  7/16, -7/16,  7/16,  8/16, 7/16},
+		wall_top    = { -7/16,  7/16, -7/16,  7/16,  8/16, 7/16 },
-		wall_side   = {-8/16, -7/16, -7/16, -7/16,  7/16, 7/16},
+		wall_side   = { -8/16, -7/16, -7/16, -7/16,  7/16, 7/16 },
 	},
+	selection_box = {
+		type = "wallmounted",
+		wall_bottom = { -7/16, -8/16, -7/16,  7/16, -7/16, 7/16 },
+		wall_top    = { -7/16,  7/16, -7/16,  7/16,  8/16, 7/16 },
+		wall_side   = { -8/16, -7/16, -7/16, -7/16,  7/16, 7/16 },
+	},
+	drop = "mesecons_solarpanel:solar_panel_off",
+	groups = {dig_immediate=3, not_in_creative_inventory = 1},
 	sounds = default.node_sound_glass_defaults(),
-	on_blast = mesecon.on_blastnode,
-},{
-	groups = {dig_immediate = 3},
-	mesecons = {receptor = {
-		state = mesecon.state.off,
-		rules = mesecon.rules.wallmounted_get
-	}}
-},{
-	groups = {dig_immediate = 3, not_in_creative_inventory = 1},
 	mesecons = {receptor = {
 		state = mesecon.state.on,
-		rules = mesecon.rules.wallmounted_get
+		rules = mesecon.rules.wallmounted_get,
 	}},
+	on_blast = mesecon.on_blastnode,
+})
+
+-- Solar Panel
+minetest.register_node("mesecons_solarpanel:solar_panel_off", {
+	drawtype = "nodebox",
+	tiles = { "jeija_solar_panel.png", },
+	inventory_image = "jeija_solar_panel.png",
+	wield_image = "jeija_solar_panel.png",
+	paramtype = "light",
+	paramtype2 = "wallmounted",
+	walkable = false,
+	is_ground_content = false,
+	node_box = {
+		type = "wallmounted",
+		wall_bottom = { -7/16, -8/16, -7/16,  7/16, -7/16, 7/16 },
+		wall_top    = { -7/16,  7/16, -7/16,  7/16,  8/16, 7/16 },
+		wall_side   = { -8/16, -7/16, -7/16, -7/16,  7/16, 7/16 },
+	},
+	selection_box = {
+		type = "wallmounted",
+		wall_bottom = { -7/16, -8/16, -7/16,  7/16, -7/16, 7/16 },
+		wall_top    = { -7/16,  7/16, -7/16,  7/16,  8/16, 7/16 },
+		wall_side   = { -8/16, -7/16, -7/16, -7/16,  7/16, 7/16 },
+	},
+	groups = {dig_immediate=3},
+	description = "Solar Panel",
+	sounds = default.node_sound_glass_defaults(),
+	mesecons = {receptor = {
+		state = mesecon.state.off,
+		rules = mesecon.rules.wallmounted_get,
+	}},
+	on_blast = mesecon.on_blastnode,
 })
 
 minetest.register_craft({
-	output = "mesecons_solarpanel:solar_panel_off",
+	output = "mesecons_solarpanel:solar_panel_off 1",
 	recipe = {
 		{"mesecons_materials:silicon", "mesecons_materials:silicon"},
 		{"mesecons_materials:silicon", "mesecons_materials:silicon"},
 	}
 })
 
-minetest.register_abm({
+minetest.register_abm(
-	label = "Solar Panel On/Off",
+	{nodenames = {"mesecons_solarpanel:solar_panel_off"},
-	nodenames = {
-		"mesecons_solarpanel:solar_panel_off",
-		"mesecons_solarpanel:solar_panel_on"
-	},
 	interval = 1,
 	chance = 1,
-	catch_up = false,
+	action = function(pos, node, active_object_count, active_object_count_wider)
-	action = function(pos, node)
+		local light = minetest.get_node_light(pos, nil)
-		local light = minetest.get_node_light(pos)
+
-		if light >= 12 and node.name == "mesecons_solarpanel:solar_panel_off" then
+		if light >= 12 then
 			node.name = "mesecons_solarpanel:solar_panel_on"
 			minetest.swap_node(pos, node)
 			mesecon.receptor_on(pos, mesecon.rules.wallmounted_get(node))
-		elseif light < 12 and node.name == "mesecons_solarpanel:solar_panel_on" then
+		end
+	end,
+})
+
+minetest.register_abm(
+	{nodenames = {"mesecons_solarpanel:solar_panel_on"},
+	interval = 1,
+	chance = 1,
+	action = function(pos, node, active_object_count, active_object_count_wider)
+		local light = minetest.get_node_light(pos, nil)
+
+		if light < 12 then
 			node.name = "mesecons_solarpanel:solar_panel_off"
 			minetest.swap_node(pos, node)
 			mesecon.receptor_off(pos, mesecon.rules.wallmounted_get(node))

mesecons_solarpanel/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_solarpanel
-depends = mesecons, mesecons_materials

mesecons_stickyblocks/depends.txt

@@ -0,0 +1,2 @@
+mesecons
+mesecons_mvps

mesecons_stickyblocks/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_stickyblocks
-depends = mesecons, mesecons_mvps

mesecons_switch/depends.txt

@@ -0,0 +1 @@
+mesecons

mesecons_switch/init.lua

@@ -11,7 +11,7 @@ mesecon.register_node("mesecons_switch:mesecon_switch", {
 		else
 			mesecon.receptor_off(pos)
 		end
-		minetest.sound_play("mesecons_switch", { pos = pos }, true)
+		minetest.sound_play("mesecons_switch", {pos=pos})
 	end
 },{
 	groups = {dig_immediate=2},

mesecons_switch/mod.conf

@@ -1,2 +0,0 @@
-name = mesecons_switch
-depends = mesecons