Better mesecon-enabled doors

The mesecons_compatibility doors erred in making steel doors, which
are meant to be locked, openable by anyone using a mesecon signal.
They also didn't handle mirror-paired doors, and nastily duplicated
lots of the standard door code rather than using it and adding to it.
Replace mesecons_compatibility with a new system, in which standard
doors are left alone and new types of door are added that have mesecon
behaviour.  The new door types are each available in both wood and steel,
using the standard door textures.

The mesecon-operated doors open and close according to the mesecon
signal they receive: open when the signal is on and closed when off.
Unlike the old mesecons_compatibility doors, which only accepted the
signal to the bottom half, these accept the signal to either half of
the door.  A convenient kind of control therefore is a wall-mounted
button just above the doorway: the signal flows diagonally down to the
top half of the door.  The door cannot be operated manually.

The mesecon-signalling doors are opened and closed manually, and generate
a mesecon signal indicating whether they're open, on when open and off
when closed.  Thus opening the door can trigger automatic activity.
Pairing a mesecon-signalling door with a mesecon-operated door results
in a door pair where right-clicking on one door operates both.

By making use of the pairing behaviour built into the standard doors mod,
which is inherited by the mesecon doors, and placing doors from sideways
angles, it is possible to effectively get mesecon doors with the opposite
signal sense.  For example, a mesecon-signalling door that sends an on
signal when closed, turning the signal off when opened.

mesecons/actionqueue.lua

@@ -0,0 +1,114 @@
+mesecon.queue.actions={} -- contains all ActionQueue actions
+
+function mesecon.queue:add_function(name, func)
+	mesecon.queue.funcs[name] = func
+end
+
+-- If add_action with twice the same overwritecheck and same position are called, the first one is overwritten
+-- use overwritecheck nil to never overwrite, but just add the event to the queue
+-- priority specifies the order actions are executed within one globalstep, highest first
+-- should be between 0 and 1
+function mesecon.queue:add_action(pos, func, params, time, overwritecheck, priority)
+	-- Create Action Table:
+	time = time or 0 -- time <= 0 --> execute, time > 0 --> wait time until execution
+	priority = priority or 1
+	local action = {	pos=mesecon:tablecopy(pos),
+				func=func,
+				params=mesecon:tablecopy(params),
+				time=time,
+				owcheck=(overwritecheck and mesecon:tablecopy(overwritecheck)) or nil,
+				priority=priority}
+
+	local toremove = nil
+	-- Otherwise, add the action to the queue
+	if overwritecheck then -- check if old action has to be overwritten / removed:
+		for i, ac in ipairs(mesecon.queue.actions) do
+			if(mesecon:cmpPos(pos, ac.pos)
+			and mesecon:cmpAny(overwritecheck, ac.owcheck)) then
+				toremove = i
+				break
+			end
+		end
+	end
+
+	if (toremove ~= nil) then
+		table.remove(mesecon.queue.actions, toremove)
+	end
+
+	table.insert(mesecon.queue.actions, action)
+end
+
+-- execute the stored functions on a globalstep
+-- if however, the pos of a function is not loaded (get_node_or_nil == nil), do NOT execute the function
+-- this makes sure that resuming mesecons circuits when restarting minetest works fine
+-- However, even that does not work in some cases, that's why we delay the time the globalsteps
+-- start to be execute by 5 seconds
+local get_highest_priority = function (actions)
+	local highestp = -1, highesti
+	for i, ac in ipairs(actions) do
+		if ac.priority > highestp then
+			highestp = ac.priority
+			highesti = i
+		end
+	end
+
+	return highesti
+end
+
+local m_time = 0
+minetest.register_globalstep(function (dtime)
+	m_time = m_time + dtime
+	if (m_time < MESECONS_RESUMETIME) then return end -- don't even try if server has not been running for XY seconds
+	local actions = mesecon:tablecopy(mesecon.queue.actions)
+	local actions_now={}
+
+	mesecon.queue.actions = {}
+
+	-- sort actions into two categories:
+	-- those toexecute now (actions_now) and those to execute later (mesecon.queue.actions)
+	for i, ac in ipairs(actions) do
+		if ac.time > 0 then
+			ac.time = ac.time - dtime -- executed later
+			table.insert(mesecon.queue.actions, ac)
+		else
+			table.insert(actions_now, ac)
+		end
+	end
+
+	while(#actions_now > 0) do -- execute highest priorities first, until all are executed
+		local hp = get_highest_priority(actions_now)
+		mesecon.queue:execute(actions_now[hp])
+		table.remove(actions_now, hp)
+	end
+end)
+
+function mesecon.queue:execute(action)
+	mesecon.queue.funcs[action.func](action.pos, unpack(action.params))
+end
+
+
+-- Store and read the ActionQueue to / from a file
+-- so that upcoming actions are remembered when the game
+-- is restarted
+
+local wpath = minetest.get_worldpath()
+local function file2table(filename)
+	local f = io.open(filename, "r")
+	if f==nil then return {} end
+	local t = f:read("*all")
+	f:close()
+	if t=="" or t==nil then return {} end
+	return minetest.deserialize(t)
+end
+
+local function table2file(filename, table)
+	local f = io.open(filename, "w")
+	f:write(minetest.serialize(table))
+	f:close()
+end
+
+mesecon.queue.actions = file2table(wpath.."/mesecon_actionqueue")
+
+minetest.register_on_shutdown(function()
+	mesecon.queue.actions = table2file(wpath.."/mesecon_actionqueue", mesecon.queue.actions)
+end)

mesecons/init.lua

@@ -39,40 +39,10 @@
 --	}
 --}
 
-
 -- PUBLIC VARIABLES
 mesecon={} -- contains all functions and all global variables
-mesecon.actions_on={} -- Saves registered function callbacks for mesecon on | DEPRECATED
+mesecon.queue={} -- contains the ActionQueue
-mesecon.actions_off={} -- Saves registered function callbacks for mesecon off | DEPRECATED
+mesecon.queue.funcs={} -- contains all ActionQueue functions
-mesecon.actions_change={} -- Saves registered function callbacks for mesecon change | DEPRECATED
-mesecon.receptors={} --  saves all information about receptors  | DEPRECATED
-mesecon.effectors={} --  saves all information about effectors  | DEPRECATED
-mesecon.conductors={} -- saves all information about conductors | DEPRECATED
-
-
-local wpath = minetest.get_worldpath()
-local function read_file(fn)
-	local f = io.open(fn, "r")
-	if f==nil then return {} end
-	local t = f:read("*all")
-	f:close()
-	if t=="" or t==nil then return {} end
-	return minetest.deserialize(t)
-end
-
-local function write_file(fn, tbl)
-	local f = io.open(fn, "w")
-	f:write(minetest.serialize(tbl))
-	f:close()
-end
-
-mesecon.to_update = read_file(wpath.."/mesecon_to_update")
-mesecon.r_to_update = read_file(wpath.."/mesecon_r_to_update")
-
-minetest.register_on_shutdown(function()
-	write_file(wpath.."/mesecon_to_update",mesecon.to_update)
-	write_file(wpath.."/mesecon_r_to_update",mesecon.r_to_update)
-end)
 
 -- Settings
 dofile(minetest.get_modpath("mesecons").."/settings.lua")
@@ -86,6 +56,10 @@ dofile(minetest.get_modpath("mesecons").."/presets.lua");
 -- mostly things that make the source look cleaner
 dofile(minetest.get_modpath("mesecons").."/util.lua");
 
+-- The ActionQueue
+-- Saves all the actions that have to be execute in the future
+dofile(minetest.get_modpath("mesecons").."/actionqueue.lua");
+
 -- Internal stuff
 -- This is the most important file
 -- it handles signal transmission and basically everything else
@@ -101,9 +75,20 @@ dofile(minetest.get_modpath("mesecons").."/legacy.lua");
 -- API
 -- these are the only functions you need to remember
 
-function mesecon:receptor_on_i(pos, rules)
+mesecon.queue:add_function("receptor_on", function (pos, rules)
 	rules = rules or mesecon.rules.default
 
+	-- if area (any of the rule targets) is not loaded, keep trying and call this again later
+	for _, rule in ipairs(mesecon:flattenrules(rules)) do
+		local np = mesecon:addPosRule(pos, rule)
+		-- if area is not loaded, keep trying
+		if minetest.get_node_or_nil(np) == nil then
+			mesecon.queue:add_action(pos, "receptor_on", {rules}, nil, rules)
+			return
+		end
+	end
+
+	-- execute action
 	for _, rule in ipairs(mesecon:flattenrules(rules)) do
 		local np = mesecon:addPosRule(pos, rule)
 		local rulenames = mesecon:rules_link_rule_all(pos, rule)
@@ -111,19 +96,24 @@ function mesecon:receptor_on_i(pos, rules)
 			mesecon:turnon(np, rulename)
 		end
 	end
-end
+end)
 
 function mesecon:receptor_on(pos, rules)
-	if MESECONS_GLOBALSTEP then
+	mesecon.queue:add_action(pos, "receptor_on", {rules}, nil, rules)
-		rules = rules or mesecon.rules.default
-		mesecon.r_to_update[#mesecon.r_to_update+1]={pos=pos, rules=rules, action="on"}
-	else
-		mesecon:receptor_on_i(pos, rules)
-	end
 end
 
-function mesecon:receptor_off_i(pos, rules)
+mesecon.queue:add_function("receptor_off", function (pos, rules)
 	rules = rules or mesecon.rules.default
+
+	-- if area (any of the rule targets) is not loaded, keep trying and call this again later
+	for _, rule in ipairs(mesecon:flattenrules(rules)) do
+		local np = mesecon:addPosRule(pos, rule)
+		if minetest.get_node_or_nil(np) == nil then
+			mesecon.queue:add_action(pos, "receptor_off", {rules}, nil, rules)
+			return
+		end
+	end
+
 	for _, rule in ipairs(mesecon:flattenrules(rules)) do
 		local np = mesecon:addPosRule(pos, rule)
 		local rulenames = mesecon:rules_link_rule_all(pos, rule)
@@ -131,19 +121,14 @@ function mesecon:receptor_off_i(pos, rules)
 			if not mesecon:connected_to_receptor(np, mesecon:invertRule(rule)) then
 				mesecon:turnoff(np, rulename)
 			else
-				mesecon:changesignal(np, minetest.get_node(np), rulename, mesecon.state.off)
+				mesecon:changesignal(np, minetest.get_node(np), rulename, mesecon.state.off, 2)
 			end
 		end
 	end
-end
+end)
 
 function mesecon:receptor_off(pos, rules)
-	if MESECONS_GLOBALSTEP then
+	mesecon.queue:add_action(pos, "receptor_off", {rules}, nil, rules)
-		rules = rules or mesecon.rules.default
-		mesecon.r_to_update[#mesecon.r_to_update+1]={pos=pos, rules=rules, action="off"}
-	else
-		mesecon:receptor_off_i(pos, rules)
-	end
 end
 
 

mesecons/internal.lua

@@ -22,9 +22,9 @@
 -- mesecon:effector_get_rules(node)  --> Returns the input rules of the effector (mesecon.rules.default if none specified)
 
 -- SIGNALS
--- mesecon:activate(pos, node)     --> Activates   the effector node at the specific pos (calls nodedef.mesecons.effector.action_on)
+-- mesecon:activate(pos, node, recdepth)		--> Activates   the effector node at the specific pos (calls nodedef.mesecons.effector.action_on), higher recdepths are executed later
--- mesecon:deactivate(pos, node)   --> Deactivates the effector node at the specific pos (calls nodedef.mesecons.effector.action_off)
+-- mesecon:deactivate(pos, node, recdepth)		--> Deactivates the effector node at the specific pos (calls nodedef.mesecons.effector.action_off), "
--- mesecon:changesignal(pos, node, rulename, newstate) --> Changes     the effector node at the specific pos (calls nodedef.mesecons.effector.action_change)
+-- mesecon:changesignal(pos, node, rulename, newstate)	--> Changes     the effector node at the specific pos (calls nodedef.mesecons.effector.action_change), "
 
 -- RULES
 -- mesecon:add_rules(name, rules) | deprecated? --> Saves rules table by name
@@ -41,8 +41,8 @@
 -- HIGH-LEVEL Internals
 -- mesecon:is_power_on(pos)             --> Returns true if pos emits power in any way
 -- mesecon:is_power_off(pos)            --> Returns true if pos does not emit power in any way
--- mesecon:turnon(pos, rulename)        --> Returns true  whatever there is at pos. Calls itself for connected nodes (if pos is a conductor) --> recursive, the rulename is the name of the input rule that caused calling turnon
+-- mesecon:turnon(pos, rulename)        --> Returns true  whatever there is at pos. Calls itself for connected nodes (if pos is a conductor) --> recursive, the rulename is the name of the input rule that caused calling turnon; Uses third parameter recdepth internally to determine how far away the current node is from the initial pos as it uses recursion
--- mesecon:turnoff(pos, rulename)       --> Turns off whatever there is at pos. Calls itself for connected nodes (if pos is a conductor) --> recursive, the rulename is the name of the input rule that caused calling turnoff
+-- mesecon:turnoff(pos, rulename)       --> Turns off whatever there is at pos. Calls itself for connected nodes (if pos is a conductor) --> recursive, the rulename is the name of the input rule that caused calling turnoff; Uses third parameter recdepth internally to determine how far away the current node is from the initial pos as it uses recursion
 -- mesecon:connected_to_receptor(pos)   --> Returns true if pos is connected to a receptor directly or via conductors; calls itself if pos is a conductor --> recursive
 -- mesecon:rules_link(output, input, dug_outputrules) --> Returns true if outputposition + outputrules = inputposition and inputposition + inputrules = outputposition (if the two positions connect)
 -- mesecon:rules_link_anydir(outp., inp., d_outpr.)   --> Same as rules mesecon:rules_link but also returns true if output and input are swapped
@@ -177,121 +177,76 @@ function mesecon:effector_get_rules(node)
 	return mesecon.rules.default
 end
 
---Signals
+-- #######################
+-- # Signals (effectors) #
+-- #######################
 
-function mesecon:activate(pos, node, rulename)
+-- Activation:
-	if MESECONS_GLOBALSTEP then
+mesecon.queue:add_function("activate", function (pos, rulename)
-		if rulename == nil then
+	node = minetest.get_node(pos)
-			for _,rule in ipairs(mesecon:effector_get_rules(node)) do
+	effector = mesecon:get_effector(node.name)
-				mesecon:activate(pos, node, rule)
+
-			end
+	if effector and effector.action_on then
-			return
+		effector.action_on(pos, node, rulename)
-		end
-		add_action(pos, "on", rulename)
-	else
-		local effector = mesecon:get_effector(node.name)
-		if effector and effector.action_on then
-			effector.action_on (pos, node, rulename)
-		end
 	end
-end
+end)
 
-function mesecon:deactivate(pos, node, rulename)
+function mesecon:activate(pos, node, rulename, recdepth)
-	if MESECONS_GLOBALSTEP then
+	if rulename == nil then
-		if rulename == nil then
+		for _,rule in ipairs(mesecon:effector_get_rules(node)) do
-			for _,rule in ipairs(mesecon:effector_get_rules(node)) do
+			mesecon:activate(pos, node, rule, recdepth + 1)
-				mesecon:deactivate(pos, node, rule)
-			end
-			return
 		end
-		add_action(pos, "off", rulename)
-	else
-		local effector = mesecon:get_effector(node.name)
-		if effector and effector.action_off then
-			effector.action_off (pos, node, rulename)
-		end
-	end
-end
-
-function mesecon:changesignal(pos, node, rulename, newstate)
-	
-	newstate = newstate or "on"
-	--rulename = rulename or mesecon.rules.default
-	if MESECONS_GLOBALSTEP then
-		if rulename == nil then
-			for _,rule in ipairs(mesecon:effector_get_rules(node)) do
-				mesecon:changesignal(pos, node, rule, newstate)
-			end
 		return
-		end
-		add_action(pos, "c"..newstate, rulename)
-	else
-		local effector = mesecon:get_effector(node.name)
-		if effector and effector.action_change then
-			effector.action_change (pos, node, rulename, newstate)
-		end
 	end
+	mesecon.queue:add_action(pos, "activate", {rulename}, nil, rulename, 1 / recdepth)
 end
 
-function execute_actions(dtime)
+
-	local nactions = mesecon.to_update
+-- Deactivation
-	mesecon.to_update = {}
+mesecon.queue:add_function("deactivate", function (pos, rulename)
-	for _,i in ipairs(nactions) do
+	node = minetest.get_node(pos)
-		node = minetest.get_node(i.pos)
+	effector = mesecon:get_effector(node.name)
-		if node.name=="ignore" then
+
-			add_action(i.pos, i.action, i.rname)
+	if effector and effector.action_off then
-		else
+		effector.action_off(pos, node, rulename)
-			effector = mesecon:get_effector(node.name)
-			if i.action == "on" then
-				if effector and effector.action_on then
-					effector.action_on(i.pos, node, i.rname)
-				end
-			elseif i.action == "off" then
-				if effector and effector.action_off then
-					effector.action_off(i.pos, node, i.rname)
-				end
-			elseif i.action == "con" then
-				if effector and effector.action_change then
-					effector.action_change(i.pos, node, i.rname, "on")
-				end
-			elseif i.action == "coff" then
-				if effector and effector.action_change then
-					effector.action_change(i.pos, node, i.rname, "off")
-				end
-			end
-		end
 	end
-	local nactions = mesecon.r_to_update
+end)
-	mesecon.r_to_update = {}
+
-	for _,i in ipairs(nactions) do
+function mesecon:deactivate(pos, node, rulename, recdepth)
-		if i.action == "on" then
+	if rulename == nil then
-			mesecon:receptor_on_i(i.pos, i.rules)
+		for _,rule in ipairs(mesecon:effector_get_rules(node)) do
-		else
+			mesecon:deactivate(pos, node, rule, recdepth + 1)
-			mesecon:receptor_off_i(i.pos,i.rules)
 		end
+		return
 	end
+	mesecon.queue:add_action(pos, "deactivate", {rulename}, nil, rulename, 1 / recdepth)
 end
 
-minetest.register_globalstep(execute_actions)
 
-function add_action(pos, action, rname)
+-- Change
-	for _,i in ipairs(mesecon.to_update) do
+mesecon.queue:add_function("change", function (pos, rulename, changetype)
-		if i.pos.x == pos.x and i.pos.y == pos.y and i.pos.z == pos.z and i.rname.x == rname.x and i.rname.y == rname.y and i.rname.z == rname.z then
+	node = minetest.get_node(pos)
-			if (i.action == "on" and action == "on") or (i.action == "off" and action == "off") then
+	effector = mesecon:get_effector(node.name)
-				--nothing
+
-			elseif i.action == "coff" and action == "on" then i.action = "on"
+	if effector and effector.action_change then
-			elseif i.action == "con" and action == "off" then i.action = "off"
+		effector.action_change(pos, node, rulename, changetype)
-			else
-				if action == "on" or action == "con" then i.action = "con" end
-				if action == "off" or action == "coff" then i.action = "coff" end
-			end
-			break
-		end
 	end
-	mesecon.to_update[#mesecon.to_update+1] = {pos = pos, action = action, rname = rname}
+end)
+
+function mesecon:changesignal(pos, node, rulename, newstate, recdepth)
+	if rulename == nil then
+		for _,rule in ipairs(mesecon:effector_get_rules(node)) do
+			mesecon:changesignal(pos, node, rule, newstate, recdepth + 1)
+		end
+		return
+	end
+
+	mesecon.queue:add_action(pos, "change", {rulename, newstate}, nil, rulename, 1 / recdepth)
 end
 
---Rules
+-- #########
+-- # Rules # "Database" for rulenames
+-- #########
 
 function mesecon:add_rules(name, rules)
 	mesecon.rules[name] = rules
@@ -410,8 +365,15 @@ function mesecon:is_power_off(pos, rulename)
 	return false
 end
 
-function mesecon:turnon(pos, rulename)
+function mesecon:turnon(pos, rulename, recdepth)
+	recdepth = recdepth or 2
 	local node = minetest.get_node(pos)
+
+	if(node.name == "ignore") then
+		-- try turning on later again
+		mesecon.queue:add_action(
+			pos, "turnon", {rulename, recdepth + 1}, nil, true)
+	end
 	
 	if mesecon:is_conductor_off(node, rulename) then
 		local rules = mesecon:conductor_get_rules(node)
@@ -419,7 +381,7 @@ function mesecon:turnon(pos, rulename)
 		if not rulename then
 			for _, rule in ipairs(mesecon:flattenrules(rules)) do
 				if mesecon:connected_to_receptor(pos, rule) then
-					mesecon:turnon(pos, rule)
+					mesecon:turnon(pos, rule, recdepth + 1)
 				end
 			end
 			return
@@ -429,54 +391,71 @@ function mesecon:turnon(pos, rulename)
 
 		for _, rule in ipairs(mesecon:rule2meta(rulename, rules)) do
 			local np = mesecon:addPosRule(pos, rule)
-			local rulenames = mesecon:rules_link_rule_all(pos, rule)
+			if(minetest.get_node(np).name == "ignore") then
+				-- try turning on later again
+				mesecon.queue:add_action(
+					np, "turnon", {rulename, recdepth + 1}, nil, true)
+			else
+				local rulenames = mesecon:rules_link_rule_all(pos, rule)
 
-			for _, rulename in ipairs(rulenames) do
+				for _, rulename in ipairs(rulenames) do
-				mesecon:turnon(np, rulename)
+					mesecon:turnon(np, rulename, recdepth + 1)
+				end
 			end
 		end
 	elseif mesecon:is_effector(node.name) then
-		mesecon:changesignal(pos, node, rulename, mesecon.state.on)
+		mesecon:changesignal(pos, node, rulename, mesecon.state.on, recdepth)
 		if mesecon:is_effector_off(node.name) then
-			mesecon:activate(pos, node, rulename)
+			mesecon:activate(pos, node, rulename, recdepth)
 		end
 	end
 end
 
-function mesecon:turnoff(pos, rulename)
+mesecon.queue:add_function("turnon", function (pos, rulename, recdepth)
+	mesecon:turnon(pos, rulename, recdepth)
+end)
+
+function mesecon:turnoff(pos, rulename, recdepth)
+	recdepth = recdepth or 2
 	local node = minetest.get_node(pos)
 
+	if(node.name == "ignore") then
+		-- try turning on later again
+		mesecon.queue:add_action(
+			pos, "turnoff", {rulename, recdepth + 1}, nil, true)
+	end
+
 	if mesecon:is_conductor_on(node, rulename) then
 		local rules = mesecon:conductor_get_rules(node)
-		--[[
-		if not rulename then
-			for _, rule in ipairs(mesecon:flattenrules(rules)) do
-				if mesecon:is_powered(pos, rule) then
-					mesecon:turnoff(pos, rule)
-				end
-			end
-			return
-		end
-		--]]
 		minetest.swap_node(pos, {name = mesecon:get_conductor_off(node, rulename), param2 = node.param2})
 
 		for _, rule in ipairs(mesecon:rule2meta(rulename, rules)) do
 			local np = mesecon:addPosRule(pos, rule)
-			local rulenames = mesecon:rules_link_rule_all(pos, rule)
+			if(minetest.get_node(np).name == "ignore") then
+				-- try turning on later again
+				mesecon.queue:add_action(
+					np, "turnoff", {rulename, recdepth + 1}, nil, true)
+			else
+				local rulenames = mesecon:rules_link_rule_all(pos, rule)
 
-			for _, rulename in ipairs(rulenames) do
+				for _, rulename in ipairs(rulenames) do
-				mesecon:turnoff(np, rulename)
+					mesecon:turnoff(np, rulename, recdepth + 1)
+				end
 			end
 		end
 	elseif mesecon:is_effector(node.name) then
-		mesecon:changesignal(pos, node, rulename, mesecon.state.off)
+		mesecon:changesignal(pos, node, rulename, mesecon.state.off, recdepth)
 		if mesecon:is_effector_on(node.name)
 		and not mesecon:is_powered(pos) then
-			mesecon:deactivate(pos, node, rulename)
+			mesecon:deactivate(pos, node, rulename, recdepth + 1)
 		end
 	end
 end
 
+mesecon.queue:add_function("turnoff", function (pos, rulename, recdepth)
+	mesecon:turnoff(pos, rulename, recdepth)
+end)
+
 
 function mesecon:connected_to_receptor(pos, rulename)
 	local node = minetest.get_node(pos)
@@ -486,9 +465,10 @@ function mesecon:connected_to_receptor(pos, rulename)
 	if not rules then return false end
 
 	for _, rule in ipairs(mesecon:rule2meta(rulename, rules)) do
-		local np = mesecon:addPosRule(pos, rule)
+		local rulenames = mesecon:rules_link_rule_all_inverted(pos, rule)
-		if mesecon:rules_link(np, pos) then
+		for _, rname in ipairs(rulenames) do
-			if mesecon:find_receptor_on(np, {}, mesecon:invertRule(rule)) then
+			local np = mesecon:addPosRule(pos, rname)
+			if mesecon:find_receptor_on(np, {}, mesecon:invertRule(rname)) then
 				return true
 			end
 		end
@@ -518,9 +498,10 @@ function mesecon:find_receptor_on(pos, checked, rulename)
 		-- add current position to checked
 		table.insert(checked, {x=pos.x, y=pos.y, z=pos.z, metaindex = metaindex})
 		for _, rule in ipairs(mesecon:rule2meta(rulename, rules)) do
-			local np = mesecon:addPosRule(pos, rule)
+			local rulenames = mesecon:rules_link_rule_all_inverted(pos, rule)
-			if mesecon:rules_link(np, pos) then
+			for _, rname in ipairs(rulenames) do
-				if mesecon:find_receptor_on(np, checked, mesecon:invertRule(rule)) then
+				local np = mesecon:addPosRule(pos, rname)
+				if mesecon:find_receptor_on(np, checked, mesecon:invertRule(rname)) then
 					return true
 				end
 			end
@@ -583,6 +564,26 @@ function mesecon:rules_link_rule_all(output, rule) --output/input are positions
 	return rules
 end
 
+function mesecon:rules_link_rule_all_inverted(input, rule)
+	--local irule = mesecon:invertRule(rule)
+	local output = mesecon:addPosRule(input, rule)
+	local outputnode = minetest.get_node(output)
+	local outputrules = mesecon:get_any_outputrules (outputnode)
+	if not outputrules then
+		return {}
+	end
+	local rules = {}
+	
+	for _, outputrule in ipairs(mesecon:flattenrules(outputrules)) do
+		if  mesecon:cmpPos(mesecon:addPosRule(output, outputrule), input) then
+			if outputrule.sx == nil or rule.sx == nil or mesecon:cmpSpecial(outputrule, rule) then
+				rules[#rules+1] = mesecon:invertRule(outputrule)
+			end
+		end
+	end
+	return rules
+end
+
 function mesecon:rules_link_anydir(pos1, pos2)
 	return mesecon:rules_link(pos1, pos2) or mesecon:rules_link(pos2, pos1)
 end
@@ -594,21 +595,23 @@ function mesecon:is_powered(pos, rule)
 
 	if not rule then
 		for _, rule in ipairs(mesecon:flattenrules(rules)) do
-			local np = mesecon:addPosRule(pos, rule)
+			local rulenames = mesecon:rules_link_rule_all_inverted(pos, rule)
-			local nn = minetest.get_node(np)
+			for _, rname in ipairs(rulenames) do
-	
+				local np = mesecon:addPosRule(pos, rname)
-			if (mesecon:is_conductor_on (nn, mesecon:invertRule(rule)) or mesecon:is_receptor_on (nn.name))
+				local nn = minetest.get_node(np)
-			and mesecon:rules_link(np, pos) then
+				if (mesecon:is_conductor_on (nn, mesecon:invertRule(rname)) or mesecon:is_receptor_on (nn.name)) then
-				return true
+					return true
+				end
 			end
 		end
 	else
-		local np = mesecon:addPosRule(pos, rule)
+		local rulenames = mesecon:rules_link_rule_all_inverted(pos, rule)
-		local nn = minetest.get_node(np)
+		for _, rname in ipairs(rulenames) do
-
+			local np = mesecon:addPosRule(pos, rname)
-		if (mesecon:is_conductor_on (nn, mesecon:invertRule(rule)) or mesecon:is_receptor_on (nn.name))
+			local nn = minetest.get_node(np)
-		and mesecon:rules_link(np, pos) then
+			if (mesecon:is_conductor_on (nn, mesecon:invertRule(rname)) or mesecon:is_receptor_on (nn.name)) then
-			return true
+				return true
+			end
 		end
 	end
 	

mesecons/legacy.lua

@@ -2,4 +2,31 @@ minetest.swap_node = minetest.swap_node or function(pos, node)
 	local data = minetest.get_meta(pos):to_table()
 	minetest.add_node(pos, node)
 	minetest.get_meta(pos):from_table(data)
-end
+end
+
+local rules = {}
+rules.a = {x = -1, y = 0, z =  0, name="A"}
+rules.b = {x =  0, y = 0, z =  1, name="B"}
+rules.c = {x =  1, y = 0, z =  0, name="C"}
+rules.d = {x =  0, y = 0, z = -1, name="D"}
+
+function legacy_update_ports(pos)
+	local meta = minetest.get_meta(pos)
+	L = {
+		a = mesecon:is_power_on(mesecon:addPosRule(pos, rules.a),
+			mesecon:invertRule(rules.a)) and
+			mesecon:rules_link(mesecon:addPosRule(pos, rules.a), pos),
+		b = mesecon:is_power_on(mesecon:addPosRule(pos, rules.b),
+			mesecon:invertRule(rules.b)) and
+			mesecon:rules_link(mesecon:addPosRule(pos, rules.b), pos),
+		c = mesecon:is_power_on(mesecon:addPosRule(pos, rules.c),
+			mesecon:invertRule(rules.c)) and
+			mesecon:rules_link(mesecon:addPosRule(pos, rules.c), pos),
+		d = mesecon:is_power_on(mesecon:addPosRule(pos, rules.d),
+			mesecon:invertRule(rules.d)) and
+			mesecon:rules_link(mesecon:addPosRule(pos, rules.d), pos),
+	}
+	local n = (L.a and 1 or 0) + (L.b and 2 or 0) + (L.c and 4 or 0) + (L.d and 8 or 0) + 1
+	meta:set_int("real_portstates", n)
+	return L
+end

mesecons/services.lua

@@ -1,38 +1,76 @@
+-- Dig and place services
+
 mesecon.on_placenode = function (pos, node)
+	-- Receptors: Send on signal when active
 	if mesecon:is_receptor_on(node.name) then
 		mesecon:receptor_on(pos, mesecon:receptor_get_rules(node))
-	elseif mesecon:is_powered(pos) then
+	end
-		if mesecon:is_conductor(node.name) then
+
+	-- Conductors: Send turnon signal when powered or replace by respective offstate conductor
+	-- if placed conductor is an onstate one
+	if mesecon:is_conductor(node.name) then
+		if mesecon:is_powered(pos) then
+			-- also call receptor_on if itself is powered already, so that neighboring
+			-- conductors will be activated (when pushing an on-conductor with a piston)
 			mesecon:turnon (pos)
-			--mesecon:receptor_on (pos, mesecon:conductor_get_rules(node))
+			mesecon:receptor_on (pos, mesecon:conductor_get_rules(node))
-		else
+		elseif mesecon:is_conductor_off(node.name) then
-			mesecon:changesignal(pos, node, mesecon:effector_get_rules(node), "on")
+			minetest.swap_node(pos, {name = mesecon:get_conductor_off(node)})
-			mesecon:activate(pos, node)
+		end
+	end
+
+	-- Effectors: Send changesignal and activate or deactivate
+	if mesecon:is_effector(node.name) then
+		if mesecon:is_powered(pos) then
+			mesecon:changesignal(pos, node, mesecon:effector_get_rules(node), "on", 1)
+			mesecon:activate(pos, node, nil, 1)
+		else
+			mesecon:changesignal(pos, node, mesecon:effector_get_rules(node), "off", 1)
+			mesecon:deactivate(pos, node, nil, 1)
 		end
-	elseif mesecon:is_conductor_on(node) then
-		minetest.swap_node(pos, {name = mesecon:get_conductor_off(node)})
-	elseif mesecon:is_effector_on (node.name) then
-		mesecon:deactivate(pos, node)
 	end
 end
 
 mesecon.on_dignode = function (pos, node)
 	if mesecon:is_conductor_on(node) then
-		mesecon:receptor_off_i(pos, mesecon:conductor_get_rules(node))
+		mesecon:receptor_off(pos, mesecon:conductor_get_rules(node))
 	elseif mesecon:is_receptor_on(node.name) then
 		mesecon:receptor_off(pos, mesecon:receptor_get_rules(node))
 	end
 end
 
-minetest.register_abm({
-	nodenames = {"group:overheat"},
-	interval = 1.0,
-	chance = 1,
-	action = function(pos, node, active_object_count, active_object_count_wider)
-		local meta = minetest.get_meta(pos)
-		meta:set_int("heat",0)
-	end,
-})
-
 minetest.register_on_placenode(mesecon.on_placenode)
 minetest.register_on_dignode(mesecon.on_dignode)
+
+-- Overheating service for fast circuits
+
+-- returns true if heat is too high
+mesecon.do_overheat = function(pos)
+	local meta = minetest.get_meta(pos)
+	local heat = meta:get_int("heat") or 0
+
+	heat = heat + 1
+	meta:set_int("heat", heat)
+
+	if heat < OVERHEAT_MAX then
+		mesecon.queue:add_action(pos, "cooldown", {}, 1, nil, 0)
+	else
+		return true
+	end
+
+	return false
+end
+
+
+mesecon.queue:add_function("cooldown", function (pos)
+	if minetest.get_item_group(minetest.get_node(pos).name, "overheat") == 0 then
+		return -- node has been moved, this one does not use overheating - ignore
+	end
+
+	local meta = minetest.get_meta(pos)
+	local heat = meta:get_int("heat")
+
+	if (heat > 0) then
+		meta:set_int("heat", heat - 1)
+	end
+end)

mesecons/settings.lua

@@ -1,9 +1,12 @@
 -- SETTINGS
 BLINKY_PLANT_INTERVAL = 3
-NEW_STYLE_WIRES  = true  -- true = new nodebox wires, false = old raillike wires
+NEW_STYLE_WIRES  = true  	-- true = new nodebox wires, false = old raillike wires
 PRESSURE_PLATE_INTERVAL = 0.1
 OBJECT_DETECTOR_RADIUS = 6
 PISTON_MAXIMUM_PUSH = 15
 MOVESTONE_MAXIMUM_PUSH = 100
-MESECONS_GLOBALSTEP = true	-- true = receptors/effectors won't be updated
+MESECONS_RESUMETIME = 4		-- time to wait when starting the server before
-				-- until next globalstep, decreases server load
+				-- processing the ActionQueue, don't set this too low
+OVERHEAT_MAX = 20		-- maximum heat of any component that directly sends an output
+				-- signal when the input changes (e.g. luacontroller, gates)
+				-- Unit: actions per second, checks are every 1 second

mesecons/util.lua

@@ -169,6 +169,7 @@ function mesecon:cmpSpecial(r1, r2)
 end
 
 function mesecon:tablecopy(table) -- deep table copy
+	if type(table) ~= "table" then return table end -- no need to copy
 	local newtable = {}
 
 	for idx, item in pairs(table) do
@@ -181,3 +182,14 @@ function mesecon:tablecopy(table) -- deep table copy
 
 	return newtable
 end
+
+function mesecon:cmpAny(t1, t2)
+	if type(t1) ~= type(t2) then return false end
+	if type(t1) ~= "table" and type(t2) ~= "table" then return t1 == t2 end
+
+	for i, e in pairs(t1) do
+		if not mesecon:cmpAny(e, t2[i]) then return false end
+	end
+
+	return true
+end

mesecons_commandblock/init.lua

@@ -23,14 +23,6 @@ minetest.register_chatcommand("tell", {
 	end
 })
 
-minetest.register_chatcommand("tellme", {
-	params = "<text>",
-	description = "Say <text> to yourself",
-	func = function(name, param)
-		minetest.chat_send_player(name, param, false)
-	end
-})
-
 minetest.register_chatcommand("hp", {
 	params = "<name> <value>",
 	description = "Set health of <name> to <value> hitpoints",
@@ -50,16 +42,13 @@ minetest.register_chatcommand("hp", {
 	end
 })
 
-local initialize_data = function(meta, player, command, param)
+local function initialize_data(meta)
+	local commands = meta:get_string("commands")
 	meta:set_string("formspec",
-		"invsize[9,6;]" ..
+		"invsize[9,5;]" ..
-		"field[1,1;7.5,1;player;Player;" .. player .. "]" ..
+		"textarea[0.5,0.5;8.5,4;commands;Commands;"..commands.."]" ..
-		"button[1.3,2;2,1;nearest;Nearest]" ..
+		"label[1,3.8;@nearest, @farthest, and @random are replaced by the respective player names]" ..
-		"button[3.3,2;2,1;farthest;Farthest]" ..
+		"button_exit[3.3,4.5;2,1;submit;Submit]")
-		"button[5.3,2;2,1;random;Random]" ..
-		"field[1,4;2,1;command;Command;" .. command .. "]" ..
-		"field[3,4;5.5,1;param;Parameter;" .. param .. "]" ..
-		"button_exit[3.3,5;2,1;submit;Submit]")
 	local owner = meta:get_string("owner")
 	if owner == "" then
 		owner = "not owned"
@@ -68,81 +57,64 @@ local initialize_data = function(meta, player, command, param)
 	end
 	meta:set_string("infotext", "Command Block\n" ..
 		"(" .. owner .. ")\n" ..
-		"Command: /" .. command .. " " .. param)
+		"Commands: "..commands)
 end
 
-local construct = function(pos)
+local function construct(pos)
 	local meta = minetest.get_meta(pos)
 
-	meta:set_string("player", "@nearest")
+	meta:set_string("commands", "tell @nearest Commandblock unconfigured")
-	meta:set_string("command", "time")
-	meta:set_string("param", "7000")
 
 	meta:set_string("owner", "")
 
-	initialize_data(meta, "@nearest", "time", "7000")
+	initialize_data(meta)
 end
 
-local after_place = function(pos, placer)
+local function after_place(pos, placer)
 	if placer then
 		local meta = minetest.get_meta(pos)
 		meta:set_string("owner", placer:get_player_name())
-		initialize_data(meta, "@nearest", "time", "7000")
+		initialize_data(meta)
 	end
 end
 
-local receive_fields = function(pos, formname, fields, sender)
+local function receive_fields(pos, formname, fields, sender)
 	if fields.quit then
 		return
 	end
 	local meta = minetest.get_meta(pos)
-	if fields.nearest then
+	local owner = meta:get_string("owner")
-		initialize_data(meta, "@nearest", fields.command, fields.param)
+	if owner ~= "" and sender:get_player_name() ~= owner then
-	elseif fields.farthest then
+		return
-		initialize_data(meta, "@farthest", fields.command, fields.param)
-	elseif fields.random then
-		initialize_data(meta, "@random", fields.command, fields.param)
-	else --fields.submit or pressed enter
-		meta:set_string("player", fields.player)
-		meta:set_string("command", fields.command)
-		meta:set_string("param", fields.param)
-
-		initialize_data(meta, fields.player, fields.command, fields.param)
 	end
+	meta:set_string("commands", fields.commands)
+
+	initialize_data(meta)
 end
 
-local resolve_player = function(name, pos)
+local function resolve_commands(commands, pos)
-	local get_distance = function(pos1, pos2)
+	local nearest, farthest = nil, nil
-		return math.sqrt((pos1.x - pos2.x) ^ 2 + (pos1.y - pos2.y) ^ 2 + (pos1.z - pos2.z) ^ 2)
+	local min_distance, max_distance = math.huge, -1
-	end
+	local players = minetest.get_connected_players()
-
+	for index, player in pairs(players) do
-	if name == "@nearest" then
+		local distance = vector.distance(pos, player:getpos())
-		local min_distance = math.huge
+		if distance < min_distance then
-		for index, player in ipairs(minetest.get_connected_players()) do
+			min_distance = distance
-			local distance = get_distance(pos, player:getpos())
+			nearest = player:get_player_name()
-			if distance < min_distance then
-				min_distance = distance
-				name = player:get_player_name()
-			end
 		end
-	elseif name == "@farthest" then
+		if distance > max_distance then
-		local max_distance = -1
+			max_distance = distance
-		for index, player in ipairs(minetest.get_connected_players()) do
+			farthest = player:get_player_name()
-			local distance = get_distance(pos, player:getpos())
-			if distance > max_distance then
-				max_distance = distance
-				name = player:get_player_name()
-			end
 		end
-	elseif name == "@random" then
-		local players = minetest.get_connected_players()
-		local player = players[math.random(#players)]
-		name = player:get_player_name()
 	end
-	return name
+	local random = players[math.random(#players)]:get_player_name()
+	commands = commands:gsub("@nearest", nearest)
+	commands = commands:gsub("@farthest", farthest)
+	commands = commands:gsub("@random", random)
+	return commands
 end
 
-local commandblock_action_on = function(pos, node)
+local function commandblock_action_on(pos, node)
 	if node.name ~= "mesecons_commandblock:commandblock_off" then
 		return
 	end
@@ -150,29 +122,48 @@ local commandblock_action_on = function(pos, node)
 	minetest.swap_node(pos, {name = "mesecons_commandblock:commandblock_on"})
 
 	local meta = minetest.get_meta(pos)
-	local command = minetest.chatcommands[meta:get_string("command")]
-	if command == nil then
-		return
-	end
 	local owner = meta:get_string("owner")
 	if owner == "" then
 		return
 	end
-	local has_privs, missing_privs = minetest.check_player_privs(owner, command.privs)
+
-	if not has_privs then
+	local commands = resolve_commands(meta:get_string("commands"), pos)
-		minetest.chat_send_player(owner, "You don't have permission to run this command (missing privileges: "..table.concat(missing_privs, ", ")..")")
+	for _, command in pairs(commands:split("\n")) do
-		return
+		local pos = command:find(" ")
+		local cmd, param = command, ""
+		if pos then
+			cmd = command:sub(1, pos - 1)
+			param = command:sub(pos + 1)
+		end
+		local cmddef = minetest.chatcommands[cmd]
+		if not cmddef then
+			minetest.chat_send_player(owner, "The command "..cmd.." does not exist")
+			return
+		end
+		local has_privs, missing_privs = minetest.check_player_privs(owner, cmddef.privs)
+		if not has_privs then
+			minetest.chat_send_player(owner, "You don't have permission "
+					.."to run "..cmd
+					.." (missing privileges: "
+					..table.concat(missing_privs, ", ")..")")
+			return
+		end
+		cmddef.func(owner, param)
 	end
-	local player = resolve_player(meta:get_string("player"), pos)
-	command.func(player, meta:get_string("param"))
 end
 
-local commandblock_action_off = function(pos, node)
+local function commandblock_action_off(pos, node)
 	if node.name == "mesecons_commandblock:commandblock_on" then
 		minetest.swap_node(pos, {name = "mesecons_commandblock:commandblock_off"})
 	end
 end
 
+local function can_dig(pos, player)
+	local meta = minetest.get_meta(pos)
+	local owner = meta:get_string("owner")
+	return owner == "" or owner == player:get_player_name()
+end
+
 minetest.register_node("mesecons_commandblock:commandblock_off", {
 	description = "Command Block",
 	tiles = {"jeija_commandblock_off.png"},
@@ -181,10 +172,7 @@ minetest.register_node("mesecons_commandblock:commandblock_off", {
 	on_construct = construct,
 	after_place_node = after_place,
 	on_receive_fields = receive_fields,
-	can_dig = function(pos,player)
+	can_dig = can_dig,
-		local owner = minetest.get_meta(pos):get_string("owner")
-		return owner == "" or owner == player:get_player_name()
-	end,
 	sounds = default.node_sound_stone_defaults(),
 	mesecons = {effector = {
 		action_on = commandblock_action_on
@@ -199,10 +187,7 @@ minetest.register_node("mesecons_commandblock:commandblock_on", {
 	on_construct = construct,
 	after_place_node = after_place,
 	on_receive_fields = receive_fields,
-	can_dig = function(pos,player)
+	can_dig = can_dig,
-		local owner = minetest.get_meta(pos):get_string("owner")
-		return owner == "" or owner == player:get_player_name()
-	end,
 	sounds = default.node_sound_stone_defaults(),
 	mesecons = {effector = {
 		action_off = commandblock_action_off

mesecons_compatibility/init.lua

@@ -1,167 +0,0 @@
-doors = {}
-
--- Registers a door - REDEFINITION ONLY | DOORS MOD MUST HAVE BEEN LOADED BEFORE
---  name: The name of the door
---  def: a table with the folowing fields:
---    description
---    inventory_image
---    groups
---    tiles_bottom: the tiles of the bottom part of the door {front, side}
---    tiles_top: the tiles of the bottom part of the door {front, side}
---    If the following fields are not defined the default values are used
---    node_box_bottom
---    node_box_top
---    selection_box_bottom
---    selection_box_top
---    only_placer_can_open: if true only the player who placed the door can
---                          open it
-
-function doors:register_door(name, def)
-	def.groups.not_in_creative_inventory = 1
-	
-	local box = {{-0.5, -0.5, -0.5,   0.5, 0.5, -0.5+1.5/16}}
-	
-	if not def.node_box_bottom then
-		def.node_box_bottom = box
-	end
-	if not def.node_box_top then
-		def.node_box_top = box
-	end
-	if not def.selection_box_bottom then
-		def.selection_box_bottom= box
-	end
-	if not def.selection_box_top then
-		def.selection_box_top = box
-	end
-	
-	local tt = def.tiles_top
-	local tb = def.tiles_bottom
-	
-	local function after_dig_node(pos, name)
-		if minetest.get_node(pos).name == name then
-			minetest.remove_node(pos)
-		end
-	end
-
-	local function on_rightclick(pos, dir, check_name, replace, replace_dir, params)
-		pos.y = pos.y+dir
-		if not minetest.get_node(pos).name == check_name then
-			return
-		end
-		local p2 = minetest.get_node(pos).param2
-		p2 = params[p2+1]
-		
-		local meta = minetest.get_meta(pos):to_table()
-		minetest.set_node(pos, {name=replace_dir, param2=p2})
-		minetest.get_meta(pos):from_table(meta)
-		
-		pos.y = pos.y-dir
-		meta = minetest.get_meta(pos):to_table()
-		minetest.set_node(pos, {name=replace, param2=p2})
-		minetest.get_meta(pos):from_table(meta)
-	end
-
-	local function on_mesecons_signal_open (pos, node)
-		on_rightclick(pos, 1, name.."_t_1", name.."_b_2", name.."_t_2", {1,2,3,0})
-	end
-
-	local function on_mesecons_signal_close (pos, node)
-		on_rightclick(pos, 1, name.."_t_2", name.."_b_1", name.."_t_1", {3,0,1,2})
-	end
-	
-	local function check_player_priv(pos, player)
-		if not def.only_placer_can_open then
-			return true
-		end
-		local meta = minetest.get_meta(pos)
-		local pn = player:get_player_name()
-		return meta:get_string("doors_owner") == pn
-	end
-	
-	minetest.register_node(":"..name.."_b_1", {
-		tiles = {tb[2], tb[2], tb[2], tb[2], tb[1], tb[1].."^[transformfx"},
-		paramtype = "light",
-		paramtype2 = "facedir",
-		drop = name,
-		drawtype = "nodebox",
-		node_box = {
-			type = "fixed",
-			fixed = def.node_box_bottom
-		},
-		selection_box = {
-			type = "fixed",
-			fixed = def.selection_box_bottom
-		},
-		groups = def.groups,
-		
-		after_dig_node = function(pos, oldnode, oldmetadata, digger)
-			pos.y = pos.y+1
-			after_dig_node(pos, name.."_t_1")
-		end,
-		
-		on_rightclick = function(pos, node, puncher)
-			if check_player_priv(pos, puncher) then
-				on_rightclick(pos, 1, name.."_t_1", name.."_b_2", name.."_t_2", {1,2,3,0})
-			end
-		end,
-
-		mesecons = {effector = {
-			action_on  = on_mesecons_signal_open
-		}},
-		
-		can_dig = check_player_priv,
-	})
-	
-	minetest.register_node(":"..name.."_b_2", {
-		tiles = {tb[2], tb[2], tb[2], tb[2], tb[1].."^[transformfx", tb[1]},
-		paramtype = "light",
-		paramtype2 = "facedir",
-		drop = name,
-		drawtype = "nodebox",
-		node_box = {
-			type = "fixed",
-			fixed = def.node_box_bottom
-		},
-		selection_box = {
-			type = "fixed",
-			fixed = def.selection_box_bottom
-		},
-		groups = def.groups,
-		
-		after_dig_node = function(pos, oldnode, oldmetadata, digger)
-			pos.y = pos.y+1
-			after_dig_node(pos, name.."_t_2")
-		end,
-		
-		on_rightclick = function(pos, node, puncher)
-			if check_player_priv(pos, puncher) then
-				on_rightclick(pos, 1, name.."_t_2", name.."_b_1", name.."_t_1", {3,0,1,2})
-			end
-		end,
-
-		mesecons = {effector = {
-			action_off = on_mesecons_signal_close
-		}},
-		
-		can_dig = check_player_priv,
-	})
-end
-
-doors:register_door("doors:door_wood", {
-	description = "Wooden Door",
-	inventory_image = "door_wood.png",
-	groups = {snappy=1,choppy=2,oddly_breakable_by_hand=2,flammable=2,door=1},
-	tiles_bottom = {"door_wood_b.png", "door_brown.png"},
-	tiles_top = {"door_wood_a.png", "door_brown.png"},
-	sounds = default.node_sound_wood_defaults(),
-})
-
-doors:register_door("doors:door_steel", {
-	description = "Steel Door",
-	inventory_image = "door_steel.png",
-	groups = {snappy=1,bendy=2,cracky=1,melty=2,level=2,door=1},
-	tiles_bottom = {"door_steel_b.png", "door_grey.png"},
-	tiles_top = {"door_steel_a.png", "door_grey.png"},
-	only_placer_can_open = true,
-	sounds = default.node_sound_stone_defaults(),
-})

mesecons_delayer/init.lua

@@ -17,28 +17,18 @@ end
 
 -- Functions that are called after the delay time
 
-local delayer_turnon = function(params)
-	local rules = delayer_get_output_rules(params.node)
-	mesecon:receptor_on(params.pos, rules)
-end
-
-local delayer_turnoff = function(params)
-	local rules = delayer_get_output_rules(params.node)
-	mesecon:receptor_off(params.pos, rules)
-end
-
 local delayer_activate = function(pos, node)
 	local def = minetest.registered_nodes[node.name]
 	local time = def.delayer_time
 	minetest.swap_node(pos, {name = def.delayer_onstate, param2=node.param2})
-	minetest.after(time, delayer_turnon , {pos = pos, node = node})
+	mesecon.queue:add_action(pos, "receptor_on", {delayer_get_output_rules(node)}, time, nil)
 end
 
 local delayer_deactivate = function(pos, node)
 	local def = minetest.registered_nodes[node.name]
 	local time = def.delayer_time
 	minetest.swap_node(pos, {name = def.delayer_offstate, param2=node.param2})
-	minetest.after(time, delayer_turnoff, {pos = pos, node = node})
+	mesecon.queue:add_action(pos, "receptor_off", {delayer_get_output_rules(node)}, time, nil)
 end
 
 -- Register the 2 (states) x 4 (delay times) delayers

mesecons_detector/init.lua

@@ -6,13 +6,13 @@ local object_detector_make_formspec = function (pos)
 	local meta = minetest.get_meta(pos)
 	meta:set_string("formspec", "size[9,2.5]" ..
 		"field[0.3,  0;9,2;scanname;Name of player to scan for (empty for any):;${scanname}]"..
-		"field[0.3,1.5;4,2;digiline_channel;Digiline Channel (optional):;${digiline_channel}]")
+		"field[0.3,1.5;4,2;digiline_channel;Digiline Channel (optional):;${digiline_channel}]"..
+		"button_exit[7,0.75;2,3;;Save]")
 end
 
 local object_detector_on_receive_fields = function(pos, formname, fields)
-	if fields.quit then
+	if not fields.scanname or not fields.digiline_channel then return end;
-		return
+
-	end
 	local meta = minetest.get_meta(pos)
 	meta:set_string("scanname", fields.scanname)
 	meta:set_string("digiline_channel", fields.digiline_channel)

mesecons_doors/depends.txt

@@ -1,2 +1,2 @@
-mesecons
 doors
+mesecons

mesecons_doors/init.lua

@@ -0,0 +1,130 @@
+local other_state_node = {}
+for _, material in ipairs({
+	{ id = "wood", desc = "Wooden", color = "brown" },
+	{ id = "steel", desc = "Steel", color = "grey" },
+}) do
+	doors:register_door("mesecons_doors:op_door_"..material.id, {
+		description = "Mesecon-operated "..material.desc.." Door",
+		inventory_image = minetest.registered_items["doors:door_"..material.id].inventory_image,
+		groups = minetest.registered_nodes["doors:door_"..material.id.."_b_1"].groups,
+		tiles_bottom = {"door_"..material.id.."_b.png", "door_"..material.color..".png"},
+		tiles_top = {"door_"..material.id.."_a.png", "door_"..material.color..".png"},
+	})
+	local groups_plus_mesecon = { mesecon = 2 }
+	for k, v in pairs(minetest.registered_nodes["doors:door_"..material.id.."_b_1"].groups) do
+		groups_plus_mesecon[k] = v
+	end
+	doors:register_door("mesecons_doors:sig_door_"..material.id, {
+		description = "Mesecon-signalling "..material.desc.." Door",
+		inventory_image = minetest.registered_items["doors:door_"..material.id].inventory_image,
+		groups = groups_plus_mesecon,
+		tiles_bottom = {"door_"..material.id.."_b.png", "door_"..material.color..".png"},
+		tiles_top = {"door_"..material.id.."_a.png", "door_"..material.color..".png"},
+	})
+	for _, thishalf in ipairs({ "t", "b" }) do
+		local otherhalf = thishalf == "t" and "b" or "t"
+		local otherdir = thishalf == "t" and -1 or 1
+		for orientation = 1, 2 do
+			local thissuffix = material.id.."_"..thishalf.."_"..orientation
+			local othersuffix = material.id.."_"..otherhalf.."_"..orientation
+			local thisopname = "mesecons_doors:op_door_"..thissuffix
+			local otheropname = "mesecons_doors:op_door_"..othersuffix
+			local oponr = minetest.registered_nodes[thisopname].on_rightclick
+			local function handle_mesecon_signal (thispos, thisnode, signal)
+				local thismeta = minetest.get_meta(thispos)
+				if signal == thismeta:get_int("sigstate") then return end
+				thismeta:set_int("sigstate", signal)
+				local otherpos = { x = thispos.x, y = thispos.y + otherdir, z = thispos.z }
+				if minetest.get_node(otherpos).name ~= otheropname then return end
+				local othermeta = minetest.get_meta(otherpos)
+				local newdoorstate = math.max(thismeta:get_int("sigstate"), othermeta:get_int("sigstate"))
+				if newdoorstate == thismeta:get_int("doorstate") then return end
+				oponr(thispos, thisnode, nil)
+				thismeta:set_int("doorstate", newdoorstate)
+				othermeta:set_int("doorstate", newdoorstate)
+			end
+			minetest.override_item(thisopname, {
+				on_construct = function (pos)
+					if mesecon:is_powered(pos) then
+						local node = minetest.get_node(pos)
+						mesecon:changesignal(pos, node, mesecon:effector_get_rules(node), "on", 1)
+						mesecon:activate(pos, node, nil, 1)
+					end
+				end,
+				on_rightclick = function (pos, node, clicker) end,
+				mesecons = {
+					effector = {
+						action_on = function (pos, node)
+							handle_mesecon_signal(pos, node, 1)
+						end,
+						action_off = function (pos, node)
+							handle_mesecon_signal(pos, node, 0)
+						end,
+					},
+				},
+			})
+			local thissigname = "mesecons_doors:sig_door_"..thissuffix
+			local othersigname = "mesecons_doors:sig_door_"..othersuffix
+			local sigonr = minetest.registered_nodes[thissigname].on_rightclick
+			minetest.override_item(thissigname, {
+				on_rightclick = function (thispos, thisnode, clicker)
+					local otherpos = { x = thispos.x, y = thispos.y + otherdir, z = thispos.z }
+					print("open: otherpos.name="..minetest.get_node(otherpos).name..", othersigname="..othersigname)
+					if minetest.get_node(otherpos).name ~= othersigname then return end
+					sigonr(thispos, thisnode, clicker)
+					for _, pos in ipairs({ thispos, otherpos }) do
+						local node = minetest.get_node(pos)
+						node.name = other_state_node[node.name]
+						minetest.swap_node(pos, node)
+						mesecon:receptor_on(pos)
+					end
+				end,
+				mesecons = { receptor = { state = mesecon.state.off } },
+			})
+			other_state_node[thissigname] = thissigname.."_on"
+			local ondef = {}
+			for k, v in pairs(minetest.registered_nodes[thissigname]) do
+				ondef[k] = v
+			end
+			ondef.on_rightclick = function (thispos, thisnode, clicker)
+				local otherpos = { x = thispos.x, y = thispos.y + otherdir, z = thispos.z }
+				print("close: otherpos.name="..minetest.get_node(otherpos).name..", othersigname="..othersigname)
+				if minetest.get_node(otherpos).name ~= othersigname.."_on" then return end
+				for _, pos in ipairs({ thispos, otherpos }) do
+					local node = minetest.get_node(pos)
+					node.name = other_state_node[node.name]
+					minetest.swap_node(pos, node)
+					mesecon:receptor_off(pos)
+				end
+				sigonr(thispos, thisnode, clicker)
+			end
+			ondef.mesecons = { receptor = { state = mesecon.state.on } }
+			ondef.after_destruct = function (thispos, thisnode)
+				local otherpos = { x = thispos.x, y = thispos.y + otherdir, z = thispos.z }
+				if minetest.get_node(otherpos).name == othersigname.."_on" then
+					minetest.remove_node(otherpos)
+					mesecon:receptor_off(otherpos)
+				end
+			end
+			other_state_node[thissigname.."_on"] = thissigname
+			ondef.mesecon_other_state_node = thissigname
+			minetest.register_node(thissigname.."_on", ondef)
+		end
+	end
+	minetest.register_craft({
+		output = "mesecons_doors:op_door_"..material.id,
+		recipe = {
+			{ "group:mesecon_conductor_craftable", "", "" },
+			{ "", "doors:door_"..material.id, "group:mesecon_conductor_craftable" },
+			{ "group:mesecon_conductor_craftable", "", "" },
+		},
+	})
+	minetest.register_craft({
+		output = "mesecons_doors:sig_door_"..material.id,
+		recipe = {
+			{ "", "", "group:mesecon_conductor_craftable" },
+			{ "group:mesecon_conductor_craftable", "doors:door_"..material.id, "" },
+			{ "", "", "group:mesecon_conductor_craftable" },
+		},
+	})
+end

mesecons_extrawires/crossover.lua

@@ -77,7 +77,7 @@ minetest.register_node("mesecons_extrawires:crossover_01", {
 			{ -3/32, -17/32, 6/32, 3/32, -13/32, 16/32+0.001 },
 		},
 	},
-	groups = {dig_immediate=3, mesecon=3, mesecon_conductor_craftable=1, not_in_creative_inventory=1},
+	groups = {dig_immediate=3, mesecon=3, not_in_creative_inventory=1},
 	mesecons = {
 		conductor = {
 			states = crossover_states,
@@ -113,7 +113,7 @@ minetest.register_node("mesecons_extrawires:crossover_10", {
 			{ -3/32, -17/32, 6/32, 3/32, -13/32, 16/32+0.001 },
 		},
 	},
-	groups = {dig_immediate=3, mesecon=3, mesecon_conductor_craftable=1, not_in_creative_inventory=1},
+	groups = {dig_immediate=3, mesecon=3, not_in_creative_inventory=1},
 	mesecons = {
 		conductor = {
 			states = crossover_states,
@@ -149,7 +149,7 @@ minetest.register_node("mesecons_extrawires:crossover_on", {
 			{ -3/32, -17/32, 6/32, 3/32, -13/32, 16/32+0.001 },
 		},
 	},
-	groups = {dig_immediate=3, mesecon=3, mesecon_conductor_craftable=1, not_in_creative_inventory=1},
+	groups = {dig_immediate=3, mesecon=3, not_in_creative_inventory=1},
 	mesecons = {
 		conductor = {
 			states = crossover_states,

mesecons_extrawires/tjunction.lua

@@ -38,7 +38,7 @@ minetest.register_node("mesecons_extrawires:tjunction_on", {
 	sunlight_propagates = true,
 	selection_box = tjunction_selectionbox,
 	node_box = tjunction_nodebox,
-	groups = {dig_immediate = 3, mesecon_conductor_craftable=1, not_in_creative_inventory = 1},
+	groups = {dig_immediate = 3, not_in_creative_inventory = 1},
 	drop = "mesecons_extrawires:tjunction_off",
 	mesecons = {conductor = 
 	{

mesecons_gates/init.lua

@@ -23,7 +23,8 @@ function gate_get_input_rules_twoinputs(node)
 	return gate_rotate_rules(node)
 end
 
-function update_gate(pos)
+function update_gate(pos, node, rulename, newstate)
+	yc_update_real_portstates(pos, node, rulename, newstate)
 	gate = get_gate(pos)
 	L = rotate_ports(
 		yc_get_real_portstates(pos),
@@ -46,9 +47,7 @@ function set_gate(pos, on)
 	gate = get_gate(pos)
 	local meta = minetest.get_meta(pos)
 	if on ~= gate_state(pos) then
-		yc_heat(meta)
+		if mesecon.do_overheat(pos) then
-		--minetest.after(0.5, yc_cool, meta)
-		if yc_overheat(meta) then
 			pop_gate(pos)
 		else
 			local node = minetest.get_node(pos)
@@ -77,7 +76,9 @@ end
 function pop_gate(pos)
 	gate = get_gate(pos)
 	minetest.remove_node(pos)
-	minetest.after(0.2, yc_overheat_off, pos)
+	minetest.after(0.2, function (pos)
+		mesecon:receptor_off(pos, mesecon.rules.flat)
+	end , pos) -- wait for pending parsings
 	minetest.add_item(pos, "mesecons_gates:"..gate.."_off")
 end
 
@@ -152,7 +153,6 @@ for _, gate in ipairs(gates) do
 			walkable = true,
 			on_construct = function(pos)
 				local meta = minetest.get_meta(pos)
-				meta:set_int("heat", 0)
 				update_gate(pos)
 			end,
 			groups = groups,
@@ -220,4 +220,3 @@ minetest.register_craft({
 		{'mesecons:mesecon', '', ''},
 	},
 })
-

mesecons_luacontroller/init.lua

@@ -31,18 +31,46 @@ rules.d = {x =  0, y = 0, z = -1, name="D"}
 ------------------
 -- These helpers are required to set the portstates of the luacontroller
 
+function lc_update_real_portstates(pos, rulename, newstate)
+	local meta = minetest.get_meta(pos)
+	if rulename == nil then
+		meta:set_int("real_portstates", 1)
+		return
+	end
+	local n = meta:get_int("real_portstates") - 1
+	if n < 0 then
+		legacy_update_ports(pos)
+		n = meta:get_int("real_portstates") - 1
+	end
+	local L = {}
+	for i = 1, 4 do
+		L[i] = n%2
+		n = math.floor(n/2)
+	end
+	if rulename.x == nil then
+		for _, rname in ipairs(rulename) do
+			local port = ({4, 1, nil, 3, 2})[rname.x+2*rname.z+3]
+			L[port] = (newstate == "on") and 1 or 0
+		end
+	else
+		local port = ({4, 1, nil, 3, 2})[rulename.x+2*rulename.z+3]
+		L[port] = (newstate == "on") and 1 or 0
+	end
+	meta:set_int("real_portstates", 1 + L[1] + 2*L[2] + 4*L[3] + 8*L[4])
+end
+
 local get_real_portstates = function(pos) -- determine if ports are powered (by itself or from outside)
-	ports = {
+	local meta = minetest.get_meta(pos)
-		a = mesecon:is_power_on(mesecon:addPosRule(pos, rules.a), mesecon:invertRule(rules.a))
+	local L = {}
-			and mesecon:rules_link(mesecon:addPosRule(pos, rules.a), pos),
+	local n = meta:get_int("real_portstates") - 1
-		b = mesecon:is_power_on(mesecon:addPosRule(pos, rules.b), mesecon:invertRule(rules.b))
+	if n < 0 then
-			and mesecon:rules_link(mesecon:addPosRule(pos, rules.b), pos),
+		return legacy_update_ports(pos)
-		c = mesecon:is_power_on(mesecon:addPosRule(pos, rules.c), mesecon:invertRule(rules.c))
+	end
-			and mesecon:rules_link(mesecon:addPosRule(pos, rules.c), pos),
+	for _, index in ipairs({"a", "b", "c", "d"}) do
-		d = mesecon:is_power_on(mesecon:addPosRule(pos, rules.d), mesecon:invertRule(rules.d))
+		L[index] = ((n%2) == 1)
-			and mesecon:rules_link(mesecon:addPosRule(pos, rules.d), pos),
+		n = math.floor(n/2)
-	}
+	end
-	return ports
+	return L
 end
 
 local merge_portstates = function (ports, vports)
@@ -94,30 +122,6 @@ end
 -- Overheat stuff --
 --------------------
 
-local heat = function (meta) -- warm up
-	h = meta:get_int("heat")
-	if h ~= nil then
-		meta:set_int("heat", h + 1)
-	end
-end
-
---local cool = function (meta) -- cool down after a while
---	h = meta:get_int("heat")
---	if h ~= nil then
---		meta:set_int("heat", h - 1)
---	end
---end
-
-local overheat = function (meta) -- determine if too hot
-	h = meta:get_int("heat")
-	if h == nil then return true end -- if nil then overheat
-	if h > 40 then 
-		return true
-	else 
-		return false 
-	end
-end
-
 local overheat_off = function(pos)
 	mesecon:receptor_off(pos, mesecon.rules.flat)
 end
@@ -164,40 +168,29 @@ local safe_serialize = function(value)
 	return minetest.serialize(deep_copy(value))
 end
 
-local interrupt = function(params)
+mesecon.queue:add_function("lc_interrupt", function (pos, iid, luac_id)
-	lc_update(params.pos, {type="interrupt", iid = params.iid})
+	-- There is no luacontroller anymore / it has been reprogrammed / replaced
-end
+	if (minetest.get_meta(pos):get_int("luac_id") ~= luac_id) then return end
+	lc_update(pos, {type="interrupt", iid = iid})
+end)
 
 local getinterrupt = function(pos)
 	local interrupt = function (time, iid) -- iid = interrupt id
 		if type(time) ~= "number" then return end
-		local iid = iid or math.random()
+		luac_id = minetest.get_meta(pos):get_int("luac_id")
-		local meta = minetest.get_meta(pos)
+		mesecon.queue:add_action(pos, "lc_interrupt", {iid, luac_id}, time, iid, 1)
-		local interrupts = minetest.deserialize(meta:get_string("lc_interrupts")) or {}
-		local found = false
-		local search = safe_serialize(iid)
-		for _, i in ipairs(interrupts) do
-			if safe_serialize(i) == search then
-				found = true
-				break
-			end
-		end
-		if not found then
-			table.insert(interrupts, iid)
-			meta:set_string("lc_interrupts", safe_serialize(interrupts))
-		end
-		minetest.after(time, interrupt, {pos=pos, iid = iid})
 	end
 	return interrupt
 end
 
-local getdigiline_send = function (pos)
+local getdigiline_send = function(pos)
-	local digiline_send = function (channel, msg)
+	if not digiline then return end
-		if digiline then
+	-- Send messages on next serverstep
+	return function(channel, msg)
+		minetest.after(0, function()
 			digiline:receptor_send(pos, digiline.rules.default, channel, msg)
-		end
+		end)
 	end
-	return digiline_send
 end
 
 local create_environment = function(pos, mem, event)
@@ -215,6 +208,8 @@ local create_environment = function(pos, mem, event)
 			mem = mem,
 			tostring = tostring,
 			tonumber = tonumber,
+			heat = minetest.get_meta(pos):get_int("heat"),
+			heat_max = OVERHEAT_MAX,
 			string = {
 				byte = string.byte,
 				char = string.char,
@@ -224,6 +219,7 @@ local create_environment = function(pos, mem, event)
 				gsub = string.gsub,
 				len = string.len,
 				lower = string.lower,
+				upper = string.upper,
 				match = string.match,
 				rep = string.rep,
 				reverse = string.reverse,
@@ -281,14 +277,10 @@ local create_sandbox = function (code, env)
 	return f
 end
 
-local do_overheat = function (pos, meta)
+local lc_overheat = function (pos, meta)
-	-- Overheat protection
+	if mesecon.do_overheat(pos) then -- if too hot
-	heat(meta)
-	--minetest.after(0.5, cool, meta)
-	if overheat(meta) then
 		local node = minetest.get_node(pos)
 		minetest.swap_node(pos, {name = BASENAME.."_burnt", param2 = node.param2})
-		minetest.get_meta(pos):set_string("lc_interrupts", "")
 		minetest.after(0.2, overheat_off, pos) -- wait for pending operations
 		return true
 	end
@@ -302,20 +294,6 @@ local save_memory = function(meta, mem)
 	meta:set_string("lc_memory", safe_serialize(mem))
 end
 
-local interrupt_allow = function (meta, event)
-	if event.type ~= "interrupt" then return true end
-
-	local interrupts = minetest.deserialize(meta:get_string("lc_interrupts")) or {}
-	local search = safe_serialize(event.iid)
-	for _, i in ipairs(interrupts) do
-		if safe_serialize(i) == search then
-			return true
-		end
-	end
-
-	return false
-end
-
 local ports_invalid = function (var)
 	if type(var) == "table" then
 		return false
@@ -329,8 +307,7 @@ end
 
 lc_update = function (pos, event)
 	local meta = minetest.get_meta(pos)
-	if not interrupt_allow(meta, event) then return end
+	if lc_overheat(pos) then return end
-	if do_overheat(pos, meta) then return end
 
 	-- load code & mem from memory
 	local mem  = load_memory(meta)
@@ -338,7 +315,7 @@ lc_update = function (pos, event)
 
 	-- make sure code is ok and create environment
 	local prohibited = code_prohibited(code)
-	if 	prohibited then return prohibited end
+	if prohibited then return prohibited end
 	local env = create_environment(pos, mem, event)
 
 	-- create the sandbox and execute code
@@ -351,7 +328,7 @@ lc_update = function (pos, event)
 	save_memory(meta, mem)
 
 	-- Actually set the ports
-	minetest.after(0, action, pos, env.port)
+	action(pos, env.port)
 end
 
 local reset_meta = function(pos, code, errmsg)
@@ -366,11 +343,11 @@ local reset_meta = function(pos, code, errmsg)
 		"image_button_exit[9.72,-0.25;0.425,0.4;jeija_close_window.png;exit;]"..
 		"label[0.1,5;"..errmsg.."]")
 	meta:set_int("heat", 0)
+	meta:set_int("luac_id", math.random(1, 1000000))
 end
 
 local reset = function (pos)
-	minetest.get_meta(pos):set_string("lc_interrupts", "")
+	action(pos, {a=false, b=false, c=false, d=false})
-	action(pos, {a=false, b=false, c=false, d=false}, true)
 end
 
 --        ______
@@ -457,6 +434,7 @@ local mesecons = {
 	{
 		rules = input_rules[cid],
 		action_change = function (pos, _, rulename, newstate)
+			lc_update_real_portstates(pos, rulename, newstate)
 			lc_update(pos, {type=newstate,  pin=rulename})
 		end,
 	},
@@ -488,33 +466,50 @@ minetest.register_node(nodename, {
 	node_box = nodebox,
 	on_construct = reset_meta,
 	on_receive_fields = function(pos, formname, fields)
-		if fields.quit then
+		if not fields.program then
 			return
 		end
 		reset(pos)
 		reset_meta(pos, fields.code)
 		local err = lc_update(pos, {type="program"})
-		if err then print(err) end
+		if err then
-		reset_meta(pos, fields.code, err)
+			print(err)
+			reset_meta(pos, fields.code, err)
+		end
 	end,
+	on_timer = handle_timer,
 	sounds = default.node_sound_stone_defaults(),
 	mesecons = mesecons,
 	digiline = digiline,
-	is_luacontroller = true,
 	virtual_portstates = {	a = a == 1, -- virtual portstates are
-					b = b == 1, -- the ports the the
+				b = b == 1, -- the ports the the
-					c = c == 1, -- controller powers itself
+				c = c == 1, -- controller powers itself
-					d = d == 1},-- so those that light up
+				d = d == 1},-- so those that light up
 	after_dig_node = function (pos, node)
 		mesecon:receptor_off(pos, output_rules)
 	end,
+	is_luacontroller = true,
 })
 end
 end
 end
 end
 
---overheated luacontroller
+------------------------------
+-- overheated luacontroller --
+------------------------------
+
+local mesecons_burnt = {
+	effector =
+	{
+		rules = mesecon.rules.flat,
+		action_change = function (pos, _, rulename, newstate)
+			-- only update portstates when changes are triggered
+			lc_update_real_portstates(pos, rulename, newstate)
+		end
+	}
+}
+
 minetest.register_node(BASENAME .. "_burnt", {
 	drawtype = "nodebox",
 	tiles = {
@@ -540,12 +535,14 @@ minetest.register_node(BASENAME .. "_burnt", {
 		reset(pos)
 		reset_meta(pos, fields.code)
 		local err = lc_update(pos, {type="program"})
-		if err then print(err) end
+		if err then
-		reset_meta(pos, fields.code, err)
+			print(err)
+			reset_meta(pos, fields.code, err)
+		end
 	end,
 	sounds = default.node_sound_stone_defaults(),
-	is_luacontroller = true,
 	virtual_portstates = {a = false, b = false, c = false, d = false},
+	mesecons = mesecons_burnt,
 })
 
 ------------------------