Add Digiline Filter-Injector

This adds a new type of Filter-Injector that waits for a digiline
message on its channel and then pulls the items described by the
message out of the inventory. It is basically a Stackwise Injector
that, on receiving a digiline message, sets its filter to the contents
of the digiline message and then activates itself.

Sending the message {name="default:brick", count=2} should do the
same thing as setting the filter of a Stackwise Filter-Injector to
two Brick Blocks and then punching it.

If no count is specified, it defaults to 1. Since this is based off
of the Stackwise Injector, it might make more sense if the default
were an entire stack. I can change this trivially.

You can also send requests like {{name="default:brick", count=1},
{name="default:dirt", count=1}}, which acts the same as setting the
filter to one Brick Block and one Dirt Block and then punching it.

If you send a string "default:dirt" instead of a table
{name="default:dirt"}, the string is passed to ItemStack and the
name and count are extracted from the resulting ItemStack. You can
also send a list of strings instead of tables: {"default:dirt",
"default:brick"}, and the first item found will be pulled.

Punching this or activating it with Mesecons currently does
nothing. I'm not really sure what would be the right thing to do in
either of those two cases, so I made it do nothing. I guess I could
make it use the previously-used filter, but I can't really see any
usefulness in that.

The recipe is probably too cheap. The darker of the two blue texture
colors could probably be better.

depends.txt

@@ -1,3 +1,4 @@
 default
 mesecons?
 mesecons_mvps?
+digilines?

filter-injector.lua

@@ -12,6 +12,21 @@ end
 
 local function set_filter_formspec(data, meta)
 	local itemname = data.wise_desc.." Filter-Injector"
+
+	local formspec
+	if data.digiline then
+		formspec = "size[8,2.7]"..
+			"item_image[0,0;1,1;pipeworks:"..data.name.."]"..
+			"label[1,0;"..minetest.formspec_escape(itemname).."]"..
+			"field[0.3,1.5;8.0,1;channel;Channel;${channel}]"..
+			fs_helpers.cycling_button(meta, "button[0,2;4,1", "slotseq_mode",
+				{"Sequence slots by Priority",
+				 "Sequence slots Randomly",
+				 "Sequence slots by Rotation"})..
+			fs_helpers.cycling_button(meta, "button[4,2;4,1", "exmatch_mode",
+				{"Exact match - off",
+				 "Exact match - on "})
+	else
 		local exmatch_button = ""
 		if data.stackwise then
 			exmatch_button =
@@ -19,7 +34,8 @@ local function set_filter_formspec(data, meta)
 					{"Exact match - off",
 					 "Exact match - on "})
 		end
-	local formspec = "size[8,8.5]"..
+
+		formspec = "size[8,8.5]"..
 			"item_image[0,0;1,1;pipeworks:"..data.name.."]"..
 			"label[1,0;"..minetest.formspec_escape(itemname).."]"..
 			"label[0,1;Prefer item types:]"..
@@ -30,6 +46,7 @@ local function set_filter_formspec(data, meta)
 				 "Sequence slots by Rotation"})..
 			exmatch_button..
 			"list[current_player;main;0,4.5;8,4;]"
+	end
 	meta:set_string("formspec", formspec)
 end
 
@@ -115,7 +132,7 @@ local function grabAndFire(data,slotseq_mode,exmatch_mode,filtmeta,frominv,fromi
 	return false
 end
 
-local function punch_filter(data, filtpos, filtnode)
+local function punch_filter(data, filtpos, filtnode, msg)
 	local filtmeta = minetest.get_meta(filtpos)
 	local filtinv = filtmeta:get_inventory()
 	local owner = filtmeta:get_string("owner")
@@ -131,15 +148,103 @@ local function punch_filter(data, filtpos, filtnode)
 	if not fromdef then return end
 	local fromtube = fromdef.tube
 	if not (fromtube and fromtube.input_inventory) then return end
+
+	local slotseq_mode
+	local exact_match
+
 	local filters = {}
+	if data.digiline then
+		local t_msg = type(msg)
+		if t_msg == "table" then
+			local slotseq = msg.slotseq
+			local t_slotseq = type(slotseq)
+			if t_slotseq == "number" and slotseq >= 0 and slotseq <= 2 then
+				slotseq_mode = slotseq
+			elseif t_slotseq == "string" then
+				slotseq = string.lower(slotseq)
+				if slotseq == "priority" then
+					slotseq_mode = 0
+				elseif slotseq == "random" then
+					slotseq_mode = 1
+				elseif slotseq == "rotation" then
+					slotseq_mode = 2
+				end
+			end
+
+			local exmatch = msg.exmatch
+			local t_exmatch = type(exmatch)
+			if t_exmatch == "number" and exmatch >= 0 and exmatch <= 1 then
+				exact_match = exmatch
+			elseif t_exmatch == "boolean" then
+				exact_match = exmatch and 1 or 0
+			end
+
+			local slotseq_index = msg.slotseq_index
+			if type(slotseq_index) == "number" then
+				-- This should allow any valid index, but I'm not completely sure what
+				-- constitutes a valid index, so I'm only allowing resetting it to 1.
+				if slotseq_index == 1 then
+					filtmeta:set_int("slotseq_index", slotseq_index)
+					set_filter_infotext(data, filtmeta)
+				end
+			end
+
+			if slotseq_mode ~= nil then
+				filtmeta:set_int("slotseq_mode", slotseq_mode)
+			end
+
+			if exact_match ~= nil then
+				filtmeta:set_int("exmatch_mode", exact_match)
+			end
+
+			if slotseq_mode ~= nil or exact_match ~= nil then
+				set_filter_formspec(data, filtmeta)
+			end
+
+			if msg.nofire then
+				return
+			end
+
+			if type(msg.name) == "string" then
+				table.insert(filters, {name = msg.name, count = tonumber(msg.count) or 1})
+			else
+				for _, filter in ipairs(msg) do
+					local t_filter = type(filter)
+					if t_filter == "table" then
+						if type(filter.name) == "string" then
+							table.insert(filters, {name = filter.name, count = tonumber(filter.count) or 1})
+						end
+					elseif t_filter == "string" then
+						local filterstack = ItemStack(filter)
+						local filtername = filterstack:get_name()
+						local filtercount = filterstack:get_count()
+						if filtername ~= "" then table.insert(filters, {name = filtername, count = filtercount}) end
+					end
+				end
+			end
+		elseif t_msg == "string" then
+			local filterstack = ItemStack(msg)
+			local filtername = filterstack:get_name()
+			local filtercount = filterstack:get_count()
+			if filtername ~= "" then table.insert(filters, {name = filtername, count = filtercount}) end
+		end
+	else
 		for _, filterstack in ipairs(filtinv:get_list("main")) do
 			local filtername = filterstack:get_name()
 			local filtercount = filterstack:get_count()
 			if filtername ~= "" then table.insert(filters, {name = filtername, count = filtercount}) end
 		end
+	end
 	if #filters == 0 then table.insert(filters, "") end
-	local slotseq_mode = filtmeta:get_int("slotseq_mode")
+
-	local exact_match = filtmeta:get_int("exmatch_mode")
+	if slotseq_mode == nil then
+		slotseq_mode = filtmeta:get_int("slotseq_mode")
+	end
+
+	if exact_match == nil then
+		exact_match = filtmeta:get_int("exmatch_mode")
+	end
+
 	local frommeta = minetest.get_meta(frompos)
 	local frominv = frommeta:get_inventory()
 	if fromtube.before_filter then fromtube.before_filter(frompos) end
@@ -167,8 +272,14 @@ for _, data in ipairs({
 		wise_desc = "Stackwise",
 		stackwise = true,
 	},
+	{ -- register even if no digilines
+		name = "digiline_filter",
+		wise_desc = "Digiline",
+		stackwise = true,
+		digiline = true,
+	},
 }) do
-	minetest.register_node("pipeworks:"..data.name, {
+	local node = {
 		description = data.wise_desc.." Filter-Injector",
 		tiles = {
 			"pipeworks_"..data.name.."_top.png",
@@ -194,14 +305,6 @@ for _, data in ipairs({
 			pipeworks.after_place(pos)
 		end,
 		after_dig_node = pipeworks.after_dig,
-		on_receive_fields = function(pos, formname, fields, sender)
-			if not pipeworks.may_configure(pos, sender) then return end
-			fs_helpers.on_receive_fields(pos, fields)
-			local meta = minetest.get_meta(pos)
-			meta:set_int("slotseq_index", 1)
-			set_filter_formspec(data, meta)
-			set_filter_infotext(data, meta)
-		end,
 		allow_metadata_inventory_put = function(pos, listname, index, stack, player)
 			if not pipeworks.may_configure(pos, player) then return 0 end
 			return stack:get_count()
@@ -219,18 +322,63 @@ for _, data in ipairs({
 			local inv = meta:get_inventory()
 			return inv:is_empty("main")
 		end,
-		mesecons = {
+		tube = {connect_sides = {right = 1}},
+	}
+
+	if data.digiline then
+		node.groups.mesecon = nil
+		if not minetest.get_modpath("digilines") then
+			node.groups.not_in_creative_inventory = 1
+		end
+
+		node.on_receive_fields = function(pos, formname, fields, sender)
+			if not pipeworks.may_configure(pos, sender) then return end
+			fs_helpers.on_receive_fields(pos, fields)
+
+			if fields.channel then
+				minetest.get_meta(pos):set_string("channel", fields.channel)
+			end
+
+			local meta = minetest.get_meta(pos)
+			--meta:set_int("slotseq_index", 1)
+			set_filter_formspec(data, meta)
+			set_filter_infotext(data, meta)
+		end
+		node.digiline = {
+			effector = {
+				action = function(pos, node, channel, msg)
+					local meta = minetest.get_meta(pos)
+					local setchan = meta:get_string("channel")
+					if setchan ~= channel then return end
+
+					punch_filter(data, pos, node, msg)
+				end,
+			},
+		}
+	else
+		node.on_receive_fields = function(pos, formname, fields, sender)
+			if not pipeworks.may_configure(pos, sender) then return end
+			fs_helpers.on_receive_fields(pos, fields)
+			local meta = minetest.get_meta(pos)
+			meta:set_int("slotseq_index", 1)
+			set_filter_formspec(data, meta)
+			set_filter_infotext(data, meta)
+		end
+		node.mesecons = {
 			effector = {
 				action_on = function(pos, node)
 					punch_filter(data, pos, node)
 				end,
 			},
-		},
+		}
-		tube = {connect_sides = {right = 1}},
+		node.on_punch = function (pos, node, puncher)
-		on_punch = function (pos, node, puncher)
 			punch_filter(data, pos, node)
-		end,
+		end
-	})
+	end
+
+
+
+	minetest.register_node("pipeworks:"..data.name, node)
 end
 
 minetest.register_craft( {
@@ -250,3 +398,14 @@ minetest.register_craft( {
 	        { "default:steel_ingot", "default:steel_ingot", "homedecor:plastic_sheeting" }
 	},
 })
+
+if minetest.get_modpath("digilines") then
+	minetest.register_craft( {
+		output = "pipeworks:digiline_filter 2",
+		recipe = {
+			{ "default:steel_ingot", "default:steel_ingot", "homedecor:plastic_sheeting" },
+			{ "group:stick", "digilines:wire_std_00000000", "homedecor:plastic_sheeting" },
+			{ "default:steel_ingot", "default:steel_ingot", "homedecor:plastic_sheeting" }
+		},
+	})
+end