Enforce checks for ignore

It is `buildable_to` so the standard check didn’t work

mesecons/util.lua

@@ -193,14 +193,23 @@ function mesecon.tablecopy(obj) -- deep copy
 	return obj
 end
 
+-- Returns whether two values are equal.
+-- In tables, keys are compared for identity but values are compared recursively.
+-- There is no protection from infinite recursion.
 function mesecon.cmpAny(t1, t2)
 	if type(t1) ~= type(t2) then return false end
-	if type(t1) ~= "table" and type(t2) ~= "table" then return t1 == t2 end
+	if type(t1) ~= "table" then return t1 == t2 end
 
+	-- Check that for each key of `t1` both tables have the same value
 	for i, e in pairs(t1) do
 		if not mesecon.cmpAny(e, t2[i]) then return false end
 	end
 
+	-- Check that all keys of `t2` are also keys of `t1` so were checked in the previous loop
+	for i, _ in pairs(t2) do
+		if t1[i] == nil then return false end
+	end
+
 	return true
 end
 

mesecons_commandblock/init.lua

@@ -174,7 +174,8 @@ end
 local function can_dig(pos, player)
 	local meta = minetest.get_meta(pos)
 	local owner = meta:get_string("owner")
-	return owner == "" or owner == player:get_player_name()
+	return owner == "" or owner == player:get_player_name() or
+		minetest.check_player_privs(player, "protection_bypass")
 end
 
 minetest.register_node("mesecons_commandblock:commandblock_off", {

mesecons_doors/init.lua

@@ -73,6 +73,7 @@ meseconify_door("doors:door_wood")
 meseconify_door("doors:door_steel")
 meseconify_door("doors:door_glass")
 meseconify_door("doors:door_obsidian_glass")
+meseconify_door("xpanes:door_steel_bar")
 
 -- Trapdoor
 local function trapdoor_switch(pos, node)
@@ -110,6 +111,12 @@ if doors and doors.get then
 	minetest.override_item("doors:trapdoor_open", override)
 	minetest.override_item("doors:trapdoor_steel", override)
 	minetest.override_item("doors:trapdoor_steel_open", override)
+
+	if minetest.registered_items["xpanes:trapdoor_steel_bar"] then
+		minetest.override_item("xpanes:trapdoor_steel_bar", override)
+		minetest.override_item("xpanes:trapdoor_steel_bar_open", override)
+	end
+
 else
 	if minetest.registered_nodes["doors:trapdoor"] then
 		minetest.override_item("doors:trapdoor", {

mesecons_doors/mod.conf

@@ -1,2 +1,3 @@
 name = mesecons_doors
 depends = mesecons, doors
+optional_depends = xpanes

mesecons_extrawires/corner.lua

@@ -1,12 +1,5 @@
 local screwdriver_exists = minetest.global_exists("screwdriver")
 
-local corner_nodebox = {
-	type = "fixed",
-	-- ±0.001 is to prevent z-fighting
-	fixed = {{ -16/32-0.001, -17/32, -3/32, 0, -13/32, 3/32 },
-		   { -3/32, -17/32, -16/32+0.001, 3/32, -13/32, 3/32}}
-}
-
 local corner_selectionbox = {
 		type = "fixed",
 		fixed = { -16/32, -16/32, -16/32, 5/32, -12/32, 5/32 },
@@ -25,14 +18,11 @@ local corner_get_rules = function (node)
 end
 
 minetest.register_node("mesecons_extrawires:corner_on", {
-	drawtype = "nodebox",
+	drawtype = "mesh",
+	mesh = "mesecons_extrawires_corner.obj",
 	tiles = {
-		"jeija_insulated_wire_curved_tb_on.png",
-		"jeija_insulated_wire_curved_tb_on.png^[transformR270",
-		"jeija_insulated_wire_sides_on.png",
-		"jeija_insulated_wire_ends_on.png",
-		"jeija_insulated_wire_sides_on.png",
-		"jeija_insulated_wire_ends_on.png"
+		{ name = "jeija_insulated_wire_sides_on.png", backface_culling = true },
+		{ name = "jeija_insulated_wire_ends_on.png", backface_culling = true },
 	},
 	paramtype = "light",
 	paramtype2 = "facedir",
@@ -55,15 +45,12 @@ minetest.register_node("mesecons_extrawires:corner_on", {
 })
 
 minetest.register_node("mesecons_extrawires:corner_off", {
-	drawtype = "nodebox",
+	drawtype = "mesh",
 	description = "Insulated Mesecon Corner",
+	mesh = "mesecons_extrawires_corner.obj",
 	tiles = {
-		"jeija_insulated_wire_curved_tb_off.png",
-		"jeija_insulated_wire_curved_tb_off.png^[transformR270",
-		"jeija_insulated_wire_sides_off.png",
-		"jeija_insulated_wire_ends_off.png",
-		"jeija_insulated_wire_sides_off.png",
-		"jeija_insulated_wire_ends_off.png"
+		{ name = "jeija_insulated_wire_sides_off.png", backface_culling = true },
+		{ name = "jeija_insulated_wire_ends_off.png", backface_culling = true },
 	},
 	paramtype = "light",
 	paramtype2 = "facedir",

mesecons_extrawires/doublecorner.lua

@@ -0,0 +1,91 @@
+local rotate
+if minetest.global_exists("screwdriver") then rotate = screwdriver.rotate_simple end
+
+local doublecorner_selectionbox = {
+	type = "fixed",
+	fixed = { -8/16, -8/16, -8/16, 8/16, -6/16, 8/16 },
+}
+
+local rules = {
+	{
+		{ x = 1, y = 0, z = 0 },
+		{ x = 0, y = 0, z = 1 },
+	},
+	{
+		{ x = -1, y = 0, z = 0 },
+		{ x = 0, y = 0, z = -1 },
+	},
+}
+
+local doublecorner_rules = {}
+for k = 1, 4 do
+	doublecorner_rules[k] = table.copy(rules)
+	for i, r in ipairs(rules) do
+		rules[i] = mesecon.rotate_rules_left(r)
+	end
+end
+
+local function doublecorner_get_rules(node)
+	return doublecorner_rules[node.param2 % 4 + 1]
+end
+
+local doublecorner_states = {
+	"mesecons_extrawires:doublecorner_00",
+	"mesecons_extrawires:doublecorner_01",
+	"mesecons_extrawires:doublecorner_10",
+	"mesecons_extrawires:doublecorner_11",
+}
+local wire1_states = { "off", "off", "on", "on" }
+local wire2_states = { "off", "on", "off", "on" }
+
+for k, state in ipairs(doublecorner_states) do
+	local w1 = wire1_states[k]
+	local w2 = wire2_states[k]
+	local groups =  { dig_immediate = 3 }
+	if k ~= 1 then groups.not_in_creative_inventory = 1 end
+	minetest.register_node(state, {
+		drawtype = "mesh",
+		mesh = "mesecons_extrawires_doublecorner.obj",
+		description = "Insulated Mesecon Double Corner",
+		tiles = {
+			{ name = "jeija_insulated_wire_sides_" .. w1 .. ".png", backface_culling = true },
+			{ name = "jeija_insulated_wire_ends_" .. w1 .. ".png", backface_culling = true },
+			{ name = "jeija_insulated_wire_sides_" .. w2 .. ".png", backface_culling = true },
+			{ name = "jeija_insulated_wire_ends_" .. w2 .. ".png", backface_culling = true },
+		},
+		paramtype = "light",
+		paramtype2 = "facedir",
+		is_ground_content = false,
+		walkable = false,
+		sunlight_propagates = true,
+		selection_box = doublecorner_selectionbox,
+		groups = groups,
+		drop = doublecorner_states[1],
+		sounds = default.node_sound_defaults(),
+		mesecons = {
+			conductor = {
+				states = doublecorner_states,
+				rules = doublecorner_get_rules,
+			},
+		},
+		on_blast = mesecon.on_blastnode,
+		on_rotate = rotate,
+	})
+end
+
+minetest.register_craft({
+	type = "shapeless",
+	output = "mesecons_extrawires:doublecorner_00",
+	recipe = {
+		"mesecons_extrawires:corner_off",
+		"mesecons_extrawires:corner_off",
+	},
+})
+
+minetest.register_craft({
+	type = "shapeless",
+	output = "mesecons_extrawires:corner_off 2",
+	recipe = {
+		"mesecons_extrawires:doublecorner_00",
+	},
+})

mesecons_extrawires/init.lua

@@ -1,5 +1,6 @@
 dofile(minetest.get_modpath("mesecons_extrawires").."/crossover.lua");
 dofile(minetest.get_modpath("mesecons_extrawires").."/tjunction.lua");
 dofile(minetest.get_modpath("mesecons_extrawires").."/corner.lua");
+dofile(minetest.get_modpath("mesecons_extrawires").."/doublecorner.lua");
 dofile(minetest.get_modpath("mesecons_extrawires").."/vertical.lua");
 dofile(minetest.get_modpath("mesecons_extrawires").."/mesewire.lua");

mesecons_extrawires/models/mesecons_extrawires_corner.obj

@@ -0,0 +1,125 @@
+# Вершины
+# Провод 1
+# 1 (ниж. внутр.)
+v 0.093750 -0.531250 -0.501000
+v 0.093750 -0.531250 -0.331726
+v 0.331726 -0.531250 -0.093750
+v 0.501000 -0.531250 -0.093750
+# 5 (ниж. наруж.)
+v -0.093750 -0.531250 -0.501000
+v -0.093750 -0.531250 -0.254061
+v 0.254061 -0.531250 0.093750
+v 0.501000 -0.531250 0.093750
+# 9 (верх. внутр.)
+v 0.093750 -0.406250 -0.501000
+v 0.093750 -0.406250 -0.331726
+v 0.331726 -0.406250 -0.093750
+v 0.501000 -0.406250 -0.093750
+# 13 (верх. наруж.)
+v -0.093750 -0.406250 -0.501000
+v -0.093750 -0.406250 -0.254061
+v 0.254061 -0.406250 0.093750
+v 0.501000 -0.406250 0.093750
+# Текстурные координаты
+# 1 (ниж.)
+vt 0.000000 0.406250
+vt 0.168274 0.406250
+vt 0.331726 0.406250
+vt 0.668274 0.406250
+vt 0.831726 0.406250
+vt 1.000000 0.406250
+vt 0.000000 0.593750
+vt 0.245939 0.593750
+vt 0.254061 0.593750
+vt 0.745939 0.593750
+vt 0.754061 0.593750
+vt 1.000000 0.593750
+# 13 (верх.)
+vt 0.000000 0.406250
+vt 0.245939 0.406250
+vt 0.254061 0.406250
+vt 0.745939 0.406250
+vt 0.754061 0.406250
+vt 1.000000 0.406250
+vt 0.000000 0.593750
+vt 0.168274 0.593750
+vt 0.331726 0.593750
+vt 0.668274 0.593750
+vt 0.831726 0.593750
+vt 1.000000 0.593750
+# 25 (внутр.)
+vt 1.000000 0.093750
+vt 0.831726 0.093750
+vt 0.668274 0.093750
+vt 0.331726 0.093750
+vt 0.168274 0.093750
+vt 0.000000 0.093750
+vt 1.000000 -0.031250
+vt 0.831726 -0.031250
+vt 0.668274 -0.031250
+vt 0.331726 -0.031250
+vt 0.168274 -0.031250
+vt 0.000000 -0.031250
+# 37 (внеш.)
+vt 0.000000 -0.031250
+vt 0.245939 -0.031250
+vt 0.254061 -0.031250
+vt 0.745939 -0.031250
+vt 0.754061 -0.031250
+vt 1.000000 -0.031250
+vt 0.000000 0.093750
+vt 0.245939 0.093750
+vt 0.254061 0.093750
+vt 0.745939 0.093750
+vt 0.754061 0.093750
+vt 1.000000 0.093750
+# 49 (торец)
+vt 0.406250 -0.031250
+vt 0.406250 0.093750
+vt 0.593750 -0.031250
+vt 0.593750 0.093750
+# Нормали
+# 1
+vn 1.000000 0.000000 0.000000
+vn 0.000000 1.000000 0.000000
+vn 0.000000 0.000000 1.000000
+vn 0.707107 0.000000 0.707107
+# 5
+vn -1.000000 0.000000 0.000000
+vn 0.000000 -1.000000 0.000000
+vn 0.000000 0.000000 -1.000000
+vn -0.707107 0.000000 -0.707107
+# Грани
+g Sides1
+# Часть 1
+f 5/37/1 6/38/1 14/44/1
+f 5/37/1 14/44/1 13/43/1
+f 13/13/2 14/14/2 10/20/2
+f 13/13/2 10/20/2 9/19/2
+f 9/25/5 10/26/5 2/32/5
+f 9/25/5 2/32/5 1/31/5
+f 1/1/6 2/2/6 6/8/6
+f 1/1/6 6/8/6 5/7/6
+# Часть 2
+f 6/39/4 7/40/4 15/46/4
+f 6/39/4 15/46/4 14/45/4
+f 14/15/2 15/16/2 11/22/2
+f 14/15/2 11/22/2 10/21/2
+f 10/27/8 11/28/8 3/34/8
+f 10/27/8 3/34/8 2/33/8
+f 2/3/6 3/4/6 7/10/6
+f 2/3/6 7/10/6 6/9/6
+# Часть 3
+f 7/41/3 8/42/3 16/48/3
+f 7/41/3 16/48/3 15/47/3
+f 15/17/2 16/18/2 12/24/2
+f 15/17/2 12/24/2 11/23/2
+f 11/29/7 12/30/7 4/36/7
+f 11/29/7 4/36/7 3/35/7
+f 3/5/6 4/6/6 8/12/6
+f 3/5/6 8/12/6 7/11/6
+g Ends1
+f 1/49/3 5/51/3 13/52/3
+f 1/49/3 13/52/3 9/50/3
+f 4/49/1 12/50/1 16/52/1
+f 4/49/1 16/52/1 8/51/1

mesecons_extrawires/models/mesecons_extrawires_doublecorner.obj

@@ -0,0 +1,180 @@
+# Вершины
+# Провод 1
+# 1 (ниж. внутр.)
+v 0.093750 -0.531250 -0.501000
+v 0.093750 -0.531250 -0.331726
+v 0.331726 -0.531250 -0.093750
+v 0.501000 -0.531250 -0.093750
+# 5 (ниж. наруж.)
+v -0.093750 -0.531250 -0.501000
+v -0.093750 -0.531250 -0.254061
+v 0.254061 -0.531250 0.093750
+v 0.501000 -0.531250 0.093750
+# 9 (верх. внутр.)
+v 0.093750 -0.406250 -0.501000
+v 0.093750 -0.406250 -0.331726
+v 0.331726 -0.406250 -0.093750
+v 0.501000 -0.406250 -0.093750
+# 13 (верх. наруж.)
+v -0.093750 -0.406250 -0.501000
+v -0.093750 -0.406250 -0.254061
+v 0.254061 -0.406250 0.093750
+v 0.501000 -0.406250 0.093750
+# Провод 2
+# 17 (ниж. внутр.)
+v -0.093750 -0.531250 0.501000
+v -0.093750 -0.531250 0.331726
+v -0.331726 -0.531250 0.093750
+v -0.501000 -0.531250 0.093750
+# 21 (ниж. наруж.)
+v 0.093750 -0.531250 0.501000
+v 0.093750 -0.531250 0.254061
+v -0.254061 -0.531250 -0.093750
+v -0.501000 -0.531250 -0.093750
+# 25 (верх. внутр.)
+v -0.093750 -0.406250 0.501000
+v -0.093750 -0.406250 0.331726
+v -0.331726 -0.406250 0.093750
+v -0.501000 -0.406250 0.093750
+# 29 (верх. наруж.)
+v 0.093750 -0.406250 0.501000
+v 0.093750 -0.406250 0.254061
+v -0.254061 -0.406250 -0.093750
+v -0.501000 -0.406250 -0.093750
+# Текстурные координаты
+# 1 (ниж.)
+vt 0.000000 0.406250
+vt 0.168274 0.406250
+vt 0.331726 0.406250
+vt 0.668274 0.406250
+vt 0.831726 0.406250
+vt 1.000000 0.406250
+vt 0.000000 0.593750
+vt 0.245939 0.593750
+vt 0.254061 0.593750
+vt 0.745939 0.593750
+vt 0.754061 0.593750
+vt 1.000000 0.593750
+# 13 (верх.)
+vt 0.000000 0.406250
+vt 0.245939 0.406250
+vt 0.254061 0.406250
+vt 0.745939 0.406250
+vt 0.754061 0.406250
+vt 1.000000 0.406250
+vt 0.000000 0.593750
+vt 0.168274 0.593750
+vt 0.331726 0.593750
+vt 0.668274 0.593750
+vt 0.831726 0.593750
+vt 1.000000 0.593750
+# 25 (внутр.)
+vt 1.000000 0.093750
+vt 0.831726 0.093750
+vt 0.668274 0.093750
+vt 0.331726 0.093750
+vt 0.168274 0.093750
+vt 0.000000 0.093750
+vt 1.000000 -0.031250
+vt 0.831726 -0.031250
+vt 0.668274 -0.031250
+vt 0.331726 -0.031250
+vt 0.168274 -0.031250
+vt 0.000000 -0.031250
+# 37 (внеш.)
+vt 0.000000 -0.031250
+vt 0.245939 -0.031250
+vt 0.254061 -0.031250
+vt 0.745939 -0.031250
+vt 0.754061 -0.031250
+vt 1.000000 -0.031250
+vt 0.000000 0.093750
+vt 0.245939 0.093750
+vt 0.254061 0.093750
+vt 0.745939 0.093750
+vt 0.754061 0.093750
+vt 1.000000 0.093750
+# 49 (торец)
+vt 0.406250 -0.031250
+vt 0.406250 0.093750
+vt 0.593750 -0.031250
+vt 0.593750 0.093750
+# Нормали
+# 1
+vn 1.000000 0.000000 0.000000
+vn 0.000000 1.000000 0.000000
+vn 0.000000 0.000000 1.000000
+vn 0.707107 0.000000 0.707107
+# 5
+vn -1.000000 0.000000 0.000000
+vn 0.000000 -1.000000 0.000000
+vn 0.000000 0.000000 -1.000000
+vn -0.707107 0.000000 -0.707107
+# Грани
+# Грани
+g Sides1
+# Часть 1
+f 5/37/1 6/38/1 14/44/1
+f 5/37/1 14/44/1 13/43/1
+f 13/13/2 14/14/2 10/20/2
+f 13/13/2 10/20/2 9/19/2
+f 9/25/5 10/26/5 2/32/5
+f 9/25/5 2/32/5 1/31/5
+f 1/1/6 2/2/6 6/8/6
+f 1/1/6 6/8/6 5/7/6
+# Часть 2
+f 6/39/4 7/40/4 15/46/4
+f 6/39/4 15/46/4 14/45/4
+f 14/15/2 15/16/2 11/22/2
+f 14/15/2 11/22/2 10/21/2
+f 10/27/8 11/28/8 3/34/8
+f 10/27/8 3/34/8 2/33/8
+f 2/3/6 3/4/6 7/10/6
+f 2/3/6 7/10/6 6/9/6
+# Часть 3
+f 7/41/3 8/42/3 16/48/3
+f 7/41/3 16/48/3 15/47/3
+f 15/17/2 16/18/2 12/24/2
+f 15/17/2 12/24/2 11/23/2
+f 11/29/7 12/30/7 4/36/7
+f 11/29/7 4/36/7 3/35/7
+f 3/5/6 4/6/6 8/12/6
+f 3/5/6 8/12/6 7/11/6
+g Ends1
+f 1/49/3 5/51/3 13/52/3
+f 1/49/3 13/52/3 9/50/3
+f 4/49/1 12/50/1 16/52/1
+f 4/49/1 16/52/1 8/51/1
+g Sides2
+# Часть 1
+f 21/37/1 22/38/1 30/44/1
+f 21/37/1 30/44/1 29/43/1
+f 29/13/2 30/14/2 26/20/2
+f 29/13/2 26/20/2 25/19/2
+f 25/25/5 26/26/5 18/32/5
+f 25/25/5 18/32/5 17/31/5
+f 17/1/6 18/2/6 22/8/6
+f 17/1/6 22/8/6 21/7/6
+# Часть 2
+f 22/39/4 23/40/4 31/46/4
+f 22/39/4 31/46/4 30/45/4
+f 30/15/2 31/16/2 27/22/2
+f 30/15/2 27/22/2 26/21/2
+f 26/27/8 27/28/8 19/34/8
+f 26/27/8 19/34/8 18/33/8
+f 18/3/6 19/4/6 23/10/6
+f 18/3/6 23/10/6 22/9/6
+# Часть 3
+f 23/41/3 24/42/3 32/48/3
+f 23/41/3 32/48/3 31/47/3
+f 31/17/2 32/18/2 28/24/2
+f 31/17/2 28/24/2 27/23/2
+f 27/29/7 28/30/7 20/36/7
+f 27/29/7 20/36/7 19/35/7
+f 19/5/6 20/6/6 24/12/6
+f 19/5/6 24/12/6 23/11/6
+g Ends2
+f 17/49/3 21/51/3 29/52/3
+f 17/49/3 29/52/3 25/50/3
+f 20/49/1 28/50/1 32/52/1
+f 20/49/1 32/52/1 24/51/1

mesecons_luacontroller/init.lua

@@ -266,6 +266,46 @@ local function remove_functions(x)
 	return x
 end
 
+local function validate_iid(iid)
+	if not iid then return true end -- nil is OK
+
+	local limit = mesecon.setting("luacontroller_interruptid_maxlen", 256)
+	if type(iid) == "string" then
+		if #iid <= limit then return true end -- string is OK unless too long
+		return false, "An interrupt ID was too large!"
+	end
+	if type(iid) == "number" or type(iid) == "boolean" then return true, "Non-string interrupt IDs are deprecated" end
+
+	local warn
+	local seen = {}
+	local function check(t)
+		if type(t) == "function" then
+			warn = "Functions cannot be used in interrupt IDs"
+			return false
+		end
+		if type(t) ~= "table" then
+			return true
+		end
+		if seen[t] then
+			warn = "Non-tree-like tables are forbidden as interrupt IDs"
+			return false
+		end
+		seen[t] = true
+		for k, v in pairs(t) do
+			if not check(k) then return false end
+			if not check(v) then return false end
+		end
+		return true
+	end
+	if not check(iid) then return false, warn end
+
+	if #minetest.serialize(iid) > limit then
+		return false, "An interrupt ID was too large!"
+	end
+
+	return true, "Table interrupt IDs are deprecated and are unreliable; use strings instead"
+end
+
 -- The setting affects API so is not intended to be changeable at runtime
 local get_interrupt
 if mesecon.setting("luacontroller_lightweight_interrupts", false) then
@@ -282,26 +322,18 @@ else
 	-- itbl: Flat table of functions to run after sandbox cleanup, used to prevent various security hazards
 	get_interrupt = function(pos, itbl, send_warning)
 		-- iid = interrupt id
-		local function interrupt(time, iid)
+		return function (time, iid)
 			-- NOTE: This runs within string metatable sandbox, so don't *rely* on anything of the form (""):y
 			-- Hence the values get moved out. Should take less time than original, so totally compatible
 			if type(time) ~= "number" then error("Delay must be a number") end
 			table.insert(itbl, function ()
 				-- Outside string metatable sandbox, can safely run this now
 				local luac_id = minetest.get_meta(pos):get_int("luac_id")
-				-- Check if IID is dodgy, so you can't use interrupts to store an infinite amount of data.
-				-- Note that this is safe from alter-after-free because this code gets run after the sandbox has ended.
-				-- This runs outside of the timer and *shouldn't* harm perf. unless dodgy data is being sent in the first place
-				iid = remove_functions(iid)
-				local msg_ser = minetest.serialize(iid)
-				if #msg_ser <= mesecon.setting("luacontroller_interruptid_maxlen", 256) then
-					mesecon.queue:add_action(pos, "lc_interrupt", {luac_id, iid}, time, iid, 1)
-				else
-					send_warning("An interrupt ID was too large!")
-				end
+				local ok, warn = validate_iid(iid)
+				if ok then mesecon.queue:add_action(pos, "lc_interrupt", {luac_id, iid}, time, iid, 1) end
+				if warn then send_warning(warn) end
 			end)
 		end
-		return interrupt
 	end
 end
 
@@ -632,6 +664,7 @@ local function reset_formspec(meta, code, errmsg)
 	code = minetest.formspec_escape(code or "")
 	errmsg = minetest.formspec_escape(tostring(errmsg or ""))
 	meta:set_string("formspec", "size[12,10]"
+		.."style_type[label,textarea;font=mono]"
 		.."background[-0.2,-0.25;12.4,10.75;jeija_luac_background.png]"
 		.."label[0.1,8.3;"..errmsg.."]"
 		.."textarea[0.2,0.2;12.2,9.5;code;;"..code.."]"
@@ -901,4 +934,3 @@ minetest.register_craft({
 		{'group:mesecon_conductor_craftable', 'group:mesecon_conductor_craftable', ''},
 	}
 })
-

mesecons_mvps/init.lua

@@ -29,6 +29,9 @@ function mesecon.is_mvps_stopper(node, pushdir, stack, stackid)
 end
 
 function mesecon.register_mvps_stopper(nodename, get_stopper)
+	if minetest.registered_nodes[nodename] and minetest.registered_nodes[nodename].buildable_to then
+		minetest.log("warning", ("Registering a buildable-to node \"%s\" as a mesecon stopper, this is not supported"):format(nodename))
+	end
 	if get_stopper == nil then
 			get_stopper = true
 	end
@@ -71,6 +74,10 @@ function mesecon.mvps_get_stack(pos, dir, maximum, all_pull_sticky)
 		local np = frontiers[1]
 		local nn = minetest.get_node(np)
 
+		-- Never push into unloaded blocks. Don’t try to pull from them, either.
+		-- TODO: load blocks instead, as with wires.
+		if nn.name == "ignore" then return nil end
+
 		if not node_replaceable(nn.name) then
 			table.insert(nodes, {node = nn, pos = np})
 			if #nodes > maximum then return nil end
@@ -327,10 +334,6 @@ function mesecon.mvps_move_objects(pos, dir, nodestack, movefactor)
 	end
 end
 
--- Never push into unloaded blocks. Don’t try to pull from them, either.
--- TODO: load blocks instead, as with wires.
-mesecon.register_mvps_stopper("ignore")
-
 mesecon.register_mvps_stopper("doors:door_steel_b_1")
 mesecon.register_mvps_stopper("doors:door_steel_t_1")
 mesecon.register_mvps_stopper("doors:door_steel_b_2")

mesecons_noteblock/init.lua

@@ -81,5 +81,11 @@ mesecon.noteblock_play = function(pos, param2)
 		end
 	end
 	pos.y = pos.y+1
-	minetest.sound_play(soundname, { pos = pos }, true)
+	if soundname == "fire_fire" then
+		-- Smoothly fade out fire sound
+		local handle = minetest.sound_play(soundname, {pos = pos, loop = true})
+		minetest.after(3.0, minetest.sound_fade, handle, -1.5, 0.0)
+	else
+		minetest.sound_play(soundname, {pos = pos}, true)
+	end
 end