If an operating music player was disconnected from the electrical network
or destroyed, it used to leave the music playing forever. There was
also a glitch upon starting playing, as the music was started by the
form handler but then stopped when the run function realised it wasn't
receiving any power, because it hadn't demanded any yet.
The new API function is now renamed to pipeworks.tube_inject_item(),
so use it under that name. If it is not available, synthesise the new
API in terms of the old one.
With breaking an active reactor core now causing instant meltdown, having
it breakable by hand is too hazardous. Change it to match steel block,
which constitutes the main part of the rest of the reactor structure.
Make the injector's mode button lag-resistant. Display the mode on
the button, as is done with other machines' toggle buttons. Describe
the modes using the same words that are now used to distinguish the
corresponding pipeworks objects. Expand name to "self-contained
injector", now that the pipeworks objects are also called "injector".
Show injector item image along with the item name at the head of the form.
Taking the same time per alloying cycle as other alloys meant that carbon
steel was being produced painfully slowly, becuase it processes much less
material per cycle than other alloys. This change halves the cycle time,
which leaves it still processing less material per second than other
alloying processes, but by a less drastic margin.
Replacing the extractor-based system, uranium to be used as reactor fuel
must now be enriched in stages using the centrifuge. Uranium metal can
exist at 36 levels of fissile content, from 0.0% to 3.5% in steps of 0.1%.
One round of centrifuging splits two dust of a particular grade in to one
dust each of the two neighbouring grades. Uranium of each grade can exist
as dust, ingot, and block, with all the regular metal processes to convert
between them. Uranium from ore exists in lump form, and is 0.7% fissle.
The blocks are radioactive to a degree dependent on fissile content.
Thus the chemical refinement and processing of uranium now follows the
standard pattern for metals, and is orthogonal to isotopic enrichment.
Each form of uranium (dust, ingot, block) intentionally looks identical
regardless of fissile grade.
If technic_worldgen is used alone, it defines only one grade of uranium
(as before), but defines it in the regular metal pattern, with lump, ingot
produced by cooking lump, and block crafted from ingots. It identifies
the metal only as "uranium". The multiple grades of uranium are defined
by the technic mod, which identifies each grade as "N.N%-fissile
uranium". The single grade that was registered by technic_worldgen
is redefined to be described specifically as "0.7%-fissile uranium".
For the redefinition to work, technic_worldgen must load before technic,
so technic now declares a dependency on technic_worldgen.
Each fuel rod is made from five 3.5%-fissile ingots, each of which in
turn requires one to start with five 0.7%-fissile dust, so each fuel rod
is now derived from 12.5 uranium lumps (or 25 if the lumps were first
cooked rather than being ground). This replaces the 20 lumps required
by the former recipes. After setting up and priming the centrifuge
cascade, enriching a full set of fuel for the reactor (six fuel rods)
takes 14700 centrifuge operations. It's intended to be a practical
necessity to automate the centrifuge. In the absence of EU upgrades
for the centrifuges, these operations consume 5.88e8 EU, about 0.97%
of the 6.048e10 EU that the fuel set will produce in the reactor.
The intent is that, in this respect as in others, operating a reactor
should carry a very high up-front cost, but ultimately be very profitable.
The centrifuge, currently only existing in an MV variety, is a machine
that separates a mixed substance into its constituents. Currently the
main use is to reverse alloying of metals. The alloy separation recipes
intentionally only operate on the dust form of metals, making this less
convenient than the original alloying. It also only recovers metal
constituents, not the carbon that went into cast iron or carbon steel.
This change incidentally generalises the technic recipe and
machine infrastructure to handle recipes with multiple outputs.
As unified_inventory's craft guide can't yet handle that, these recipes
are not registered there.
As the layers of reactor structure now have a practical purpose,
in attenuating the modelled radiation from the core, it is no longer
necessary to make so much of it mandatory in order to motivate players
to build it.
The siren sounds a "danger" tone continuously while it is active and
damaged, such that meltdown is imminent. It sounds a one-off "clear"
tone if it has been sounding "danger" and the danger has passed, either
because the structure is repaired or because the reactor has become idle.
The meltdown check now doesn't trigger meltdown immediately on reactor
structure being compromised. Instead, there's a grace period of up to
100 s, during which the reactor can be repaired. The check doesn't just
look at whether the structure is damaged at all: it looks at how damaged
it is, counting the number of faulty nodes. The amount of damage is
integrated over time, and the grace period is actually 100 node-seconds,
so greater damage causes meltdown more quickly. If the active core is
dug then it melts down immediately, preventing the tactic of digging
the core to avert meltdown.
Incidentally move the meltdown check into its own ABM, from the
technic_run callback, so that it applies even when the reactor is not
connected to a switching station.
Radiation is attenuated exponentially by passing through shielding
material. Radiation resistance values are assigned to all bulk-material
nodes, and the radiation damage ABM traces the path of each radiation ray
to count up the shielding. The relative radiation resistance values are
essentially real, but the effectiveness of all shielding is scaled down
by a factor of about 70 for game purposes. Strength of the existing
radiation sources is increased by varying amounts to compensate for
shielding. Uranium block and ore, both usable as shielding, are made
slightly radioactive, the latter only very slightly.
For use on servers that have a mainly creative purpose, the setting
enable_corium_griefing=false will prevent corium from flowing far or
unpredictably and from destroying nodes other than water. All reactor
meltdowns will stay contained.
Reactor `explosion' now replaces the reactor core with a corium source
node. Corium is a new liquid, which flows a bit like lava, but has
the additional feature of destroying nodes to which it is adjacent.
It also randomly turns into a solid form, chernobylite, which makes an
attractive building block. It thus gradually melts its way through the
reactor shielding layers; a meltdown gets worse over time if not cleaned
up promptly.
The mechanism for an active reactor core to damage nearby players is
generalised into a "radioactive" node group. Corium and chernobylite
are radioactive, to varying degrees. Players receive a varying amount of
damage from a radioactive node, depending on proximity. Staying outside
a reactor cube is sufficient to be safe from the active core, but not
sufficient to be safe from a melted core.
Drop support for negative mesecon control. This requires users of
negative mesecon control to invert their mesecon signal externally.
Comment on rationale for the way toggle buttons in formspec are managed.
The code formerly attempted to make the forcefield emitter controlled
both manually and by (inverted) mesecon signal, but the two interfered
with each other. In particular, a newly-placed emitted would be
informed that it was getting no mesecon signal, and would therefore
enable itself. Fix this by adding explicit modes for how the emitter
will respond to mesecon signals: ignore them, obey them positively,
or obey them negatively.
The manual control could have been incorporated into this mode setting
by having two "ignore mesecon" modes: always-enabled and always-disabled.
But it seems more useful to have a separate manual master switch, so that
the emitter can be manually disabled without losing the mesecon mode.
So it is now implemented that way.
LV cables are now paper-insulated, rather than uninsulated (which made
no sense). MV cables are rubber-insulated as before. HV cables are now
plastic-insulated (which they already visually appeared to be). MV and
HV cables are still crafted by adding insulation onto lower-tier cable,
rather than by insulating raw copper; this matches the way machines are
upgraded between tiers rather than crafted afresh.
All electric machine recipes now include cable of the appropriate tier
as the bottom-middle ingredient, immediately below the casing ingredient.
Many LV machines were using a copper ingot in that location.
