Removing includes which were not needed by headers
Note that if you include those headers directly (instead of including irrlicht.h) you may have to add some new includes now.
Thought I generally tried to avoid removing headers where it leads to too much changes in user-code
Reason was mainly that IntelliSense in VisualStudio 17.7 added a new feature which shows those unused headers :)
Has to be used a bit careful as it doesn't know about defines and other platforms
And I only did clean up public headers so far (will probably do some more later or another time)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6524 dfc29bdd-3216-0410-991c-e03cc46cb475
Note: Due to OSX always failing merge OSX it's rather applying a second patch
from Ryan Schmidt from bugreport #462 to trunk
(Not sure why svn merging always fails for OSX. Probably related to MacOSX files getting moved in the past. Was that done without svn move commands? I guess that can't be fixed anymore now)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6521 dfc29bdd-3216-0410-991c-e03cc46cb475
Note that 6514 couldn't be merged as the xcode project seems to have been rewritten and the irrFramework-Info.plist no longer exists in trunk.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6516 dfc29bdd-3216-0410-991c-e03cc46cb475
Note those were mostly backport, so trunk already had most changes.
Also we've not merged all from 1.8 branch, will need another merge (backports tend to cause lots of ugly conflicts, so have to split this a bit)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6515 dfc29bdd-3216-0410-991c-e03cc46cb475
Did no longer render nodes which were rendered in SceneManager + outside SceneManager if they didn't have the per-buffer-rendering enabled.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6491 dfc29bdd-3216-0410-991c-e03cc46cb475
Wasn't ever used by anything and not that well defined anyway.
So they all just passed it on to the drivers. And then sometimes the driver version was called and sometimes the IMaterialRendererServices version. So now everything just calls the driver - all places which need it have access to the driver anyway. Also made the driver version non-virtual for now. If someone actually really needs this for some reason I can add it back as virtual function directly in IVideoDriver. But I doubt it - the interface was hardly accessible until recently and originally only meant for internal stuff.
GLES version still to do, but checked them earlier and they also just do nothing with it.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6486 dfc29bdd-3216-0410-991c-e03cc46cb475
So far SceneManager always sorted Nodes per render stage.
Now we allow sorting per mesh-buffer per render stage by creating a new node for each mesh-buffer.
It's only supported for CMeshSceneNode so far.
This allows to enable better transparency sorting for meshes which have transparent buffers.
Previously those always got rendered in the order in which they got added and ignored mesh-buffer bounding-boxes, but just used the bbox of the full mesh. Now they can use the bbox for each meshbuffer which can sometimes avoid render errors.
Also depending on the scene this can be quite a bit faster because it can help reduce texture changes. We sort solid nodes per texture, but only per node. So nodes with several textures had a texture switch between rendering each meshbuffer. And those are rather expensive in Irrlicht right now (and we support no bindless textures yet...)
Lastly it's now also used to buffer the render-stage. Checking this twice (once in registering the node and once in render) constantly showed up in the profiler. Which was a bit surprising really, but anyway - now it's gone.
I tried to keep it working for all cases we had before (all kind of situations, like when people may want to call render() outside the SceneManager). But not (yet) supporting the case of changing the meshbuffers (adding or removing some) without calling setMesh() again. Reason is that this wasn't well supported before either (node materials never updated). So for now I just assume people will call setMesh() again when they change the mesh.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6483 dfc29bdd-3216-0410-991c-e03cc46cb475
CCubeSceneNode::getMaterialCount now returning correct count
CCubeSceneNode::clone now cloning all materials
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6474 dfc29bdd-3216-0410-991c-e03cc46cb475
Probably still moving too often to the left - should find some better solution.
But at least some improvement.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6471 dfc29bdd-3216-0410-991c-e03cc46cb475
Shouldn't have been removed with last commit.
But adding some comments as it's slightly confusing.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6470 dfc29bdd-3216-0410-991c-e03cc46cb475
This makes it possible to set high-level shader constants (which are attached to shader programs) to be set outside
of OnSetConstants.
IShaderConstantSetCallBack::OnCreate has it set automatically now so it works the same as OnSetConstants.
D3D9 and burnings both work different, so there hadn't been a problem with those.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6469 dfc29bdd-3216-0410-991c-e03cc46cb475
Accessing IMaterialRendererServices outside of OnSetConstants can be useful and Irrlicht made this a bit too hard to access.
Also OnCreate allows actually for nicer code where initialization and update of shader constants are strictly separated (see changed example).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6465 dfc29bdd-3216-0410-991c-e03cc46cb475
Basically now the same as GLSL material renderer already worked.
Before it was using IMaterialRendererServices from CD3D9Driver, but there had been several problems with that:
- The d3d9 driver called functions through the CD3D9MaterialRenderer interface, but CD3D9HLSLMaterialRenderer is not (or maybe no longer?) derived from that class. Reason it still worked was accidental luck - the same functions had been in the same order and due to casts the compiler wasn't noticing it was calling the functions of an unrelated class.
- It was making calls to set shader constants depend on the currently set material in the driver. Which was not necessary and just prevents we can use the IMaterialRendererServices interface without setting the material first (how I found the bug).
Still some problems left for now:
- There's 2 ways to call shader constants. One seems to be only used by hi-level shaders which links constants to the shader. The the other only by low-level shaders which uses global (shader independent) registers.
So maybe this should be 2 interfaces? But not certain, glsl material renderer seems to prevent setting the global registers, but maybe those could be used additionally? I've still allowed it for now in HLSL, just in case it had it's uses.
- setBasicRenderStates probably should not be in IMaterialRendererServices. I'm not seeing any case where this isn't just passed on to the driver. And all classes using it have access to the driver unless I missed one. So probably can just avoid that additional indirection and kick that out of the IMaterialRendererServices interface.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6464 dfc29bdd-3216-0410-991c-e03cc46cb475
This also fixes the combobox which users the listbox like that.
This got broken in [r6454] which had fixed the events send out by the listbox
Note: Still a bit strange behaviour when leaving the combobox at the bottom, but that was already that way in Irrlicht 1.8, so I've got to investigate that on it's own.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6463 dfc29bdd-3216-0410-991c-e03cc46cb475
We had changed that once before in the other direction in svn r421
Reason back then was "Sleep(0) doesn't allow any lower priority threads to execute"
But Microsoft changed the behaviour of Sleep(0) after Windows XP so that's no longer true.
And the costs of it is pretty high - due to this using a timer with a 15ms resolutions it meant not just giving up the thread but it also always waited for 15ms on Windows.
I also replaced a few sleep calls in examples for that reason with yield() calls.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6459 dfc29bdd-3216-0410-991c-e03cc46cb475
When pressed mouse was moved over an item before releasing the mouse button it was sending immediately EGET_LISTBOX_SELECTED_AGAIN instead of expected EGET_LISTBOX_CHANGED (mouse move changes do not send any events).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6454 dfc29bdd-3216-0410-991c-e03cc46cb475
Not quite sure why it was done that way. Maybe to ensure we work with byte-pointers of correct size or something?
Anyway, this doesn't seem to be defined in c++, so let's try working with a cast instead.
Just something cppcheck tool complained about.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6447 dfc29bdd-3216-0410-991c-e03cc46cb475
Found by clang analyser. Not sure if it could really ever have happened, but won't hurt to fix
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6443 dfc29bdd-3216-0410-991c-e03cc46cb475
This is based on bugreport #458 reported by viwrap who also made a nice test-case model.
Note: While solution seems to work and would even be faster, I'm not 100% sure yet if there are no downsides.
The other solution seems to regard last column in matrices - thought I don't think we ever set or use that.
And I also haven't found out yet _why_ the original solution goes wrong.
But animation system uses right-hand quaternions unlike rest of Irrlicht which is obviously a bit dangerous, will have to check the conversions some day.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6438 dfc29bdd-3216-0410-991c-e03cc46cb475
ISceneNode::setUpdateAbsolutePosBehavior can now control what ISceneNode::updateAbsolutePosition really does.
Having only the position and not the rotation/scale of a child node affected by the parent transformation was previously impossible inside the scene-graph. So people always had to break the scene-graph and code it themselves.
Old behaviour is default.
Extra check for new variable has a small cost, thought new behaviour can actually be faster when it's used.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6432 dfc29bdd-3216-0410-991c-e03cc46cb475
It still won't work yet for scaled boundingboxes (or parents being scaled).
But at least it's now large enough for typical unscaled boundingboxes.
Before it was always too small - even for the simplest quadratic billboard case seen without rotation.
Now it's always a bit too large, but that's way less of a problem (collisions still work and culling simply happens a bit less often, but not too often which is way worse)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6431 dfc29bdd-3216-0410-991c-e03cc46cb475
Was going wrong when setValue was called inside an event function for EGET_SPINBOX_CHANGED.
But last solution was overly complicated anyway as I tried too hard to avoid extra getValue calculations.
But noticing now those calculations got done anyway in all places where the event is triggered.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6430 dfc29bdd-3216-0410-991c-e03cc46cb475
Also documenting some missing feature (decimal places ignored with direct text input)
getValueFor allows to check the value a given text would have
getOldValue can be used to check the previous value in a EGET_SPINBOX_CHANGED event
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6429 dfc29bdd-3216-0410-991c-e03cc46cb475
Also no longer restricting mouse position to 0-windowsize (restriction for other devices got removed earlier)
And adding some commented out lines to Makesfile for easier testing of SDL. We probably should use some parameter which can be passed to Makefiles for that in the future.
Note: This does not fix all cursor troubles for SDL - it still does not support relative rectangle
Bit arguably how to handle setting/getting mouse position for SDL, for example it still doesn't support a reference rectangle.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6424 dfc29bdd-3216-0410-991c-e03cc46cb475
Needed to use bitwise not instead of logical not to clear bits for EMBSM_RIGHT and EMBSM_MIDDLE.
Thanks @gcc for it's warnings
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6423 dfc29bdd-3216-0410-991c-e03cc46cb475
Not optimal, but making this real 32-bit is sadly a bit more work.
This way at lest meshes with mixed 16/32 bit buffers can weld the 16-bit ones.
And hopefully a bit of step in the right direction to fully support 32-bit another day.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6417 dfc29bdd-3216-0410-991c-e03cc46cb475
Lots of places where coders did not realize our Printer::log with hint adds a ": " string between message and hint
Which caused uglier messages in a few places (added documentation for that, maybe helps?)
Some added info in a few places
Some whitespace unification
Some spelling unification
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6414 dfc29bdd-3216-0410-991c-e03cc46cb475
