- SRP: print the address only once, not twice
- Legacy: previously the address was not printed at all
- Make both messages structurally the same, to facilitate log analyzers
1. Do two renames:
* SER_FMT_CLIENT_VER_LOWEST -> SER_FMT_VER_LOWEST_WRITE
* SER_FMT_VER_LOWEST -> SER_FMT_VER_LOWEST_READ
Now the two define values are consistently named with the _WRITE defines
SER_FMT_VER_{HIGHEST,LOWEST}_WRITE, and to better point out what the two
serialisation versions actually are for.
2. wrap some lines in doc/worldformat.txt, and point out that the node
timers are serialized at a later point, as this can cause confusion about
what now happens (if one doesn't strictly read the if block's conditions).
3. some whitespace fixes in NodeTimerList::serialize, and one new comment.
Its obvious that "u16 command" is inside every packet, therefore this
commit removes all mentions of the command, if non-array like notation
is used. We already didn't add "u16 command" to new packets or removed
it at packet changes, so now we remove it from existing packets.
* Rename everything.
* Strip J prefix.
* Change UpperCamelCase functions to lowerCamelCase.
* Remove global (!) semaphore count mutex on OSX.
* Remove semaphore count getter (unused, unsafe, depended on internal
API functions on Windows, and used a hack on OSX).
* Add `Atomic<type>`.
* Make `Thread` handle thread names.
* Add support for C++11 multi-threading.
* Combine pthread and win32 sources.
* Remove `ThreadStarted` (unused, unneeded).
* Move some includes from the headers to the sources.
* Move all of `Event` into its header (allows inlining with no new includes).
* Make `Event` use `Semaphore` (except on Windows).
* Move some porting functions into `Thread`.
* Integrate logging with `Thread`.
* Add threading test.
This was needed due to the TileDef serialisation changes. Originally it has been planned
to also add utf-8 based chat to 26, but chat changes aren't final yet, so they are done
in one change, after the release, and not two small ones, causing us having to be compliant
to three versions of the packet.
-> Fix server crash with protocol >=25 if a default password is set.
-> Remove some useless and possibly confusion causing code for the TOCLIENT_FIRST_SRP packet handler
Use wide_to_utf8 and utf8_to_wide instead of wide_to_narrow and narrow_to_wide at almost all places.
Only exceptions: test functions for narrow conversion, and chat, which is done in a separate commit.
Previously, m_proto_ver was set to the serialisation version
inside the legacy init packet.
Now, if the server doesn't send a protocol version (protocols < 25),
we set m_proto_ver to some value < 25 and > 0.
* Use enum for GENERIC_CMD_*
* Rename m_attachements to attachement_parent_ids (public member and clearer name)
* Rename GENERIC_CMD_SET_ATTACHMENT to GENERIC_CMD_ATTACH_TO
* USHRT_MAX + 1 buffer sizes to prevent overflows as @kahrl suggested
* Remove unneccessary m_id from GenericCAO (shadowing protected superclass member for no reason) as @kahrl suggested
Adds everything needed for SRP (and everything works too),
but still deactivated, as protocol v25 init packets aren't final yet.
Can be activated by changing the LATEST_PROTOCOL_VERSION header to 25
inside networkprotocol.h.
Change types for passed password from wstring to string, which removes converting
back and forth in most cases. Move the narrow_to_wide conversion, where its neccessary,
closer to irrlicht. Remove trailing spaces in guiPasswordChange.cpp. Make parameters for
translatePassword passed as const reference.
Move debug streams to log.cpp|h
Move GUI-related globals to clientlauncher
Move g_settings and g_settings_path to settings.cpp|h
Move g_menuclouds to clouds.cpp|h
Move g_profiler to profiler.cpp|h
Because we get a Buffer<u8> from ConnectionEvent, don't convert it to SharedBuffer<u8> and return it to Server/Client::Receive which will convert it to NetworkPacket
Instead, put the Buffer<u8> directly to NetworkPacket and return it to packet processing
This remove a long existing memory copy
Also check the packet size directly into Connection::Receive instead of packet processing
* Combine client and server man pages.
* Update unit test options and available databases in man page.
* Add `--worldname` to man page.
* Fix a bunch of places where `"Minetest"` was used directly instead of `PROJECT_NAME`.
* Disable server build by default on all operating systems.
* Make `ENABLE_FREETYPE` not fail if FreeType isn't found.
* Enable LevelDB, Redis, and FreeType detection by default.
* Remove the `VERSION_PATCH_ORIG` hack.
* Add option to search for and use system JSONCPP.
* Remove broken LuaJIT version detection.
* Rename `DISABLE_LUAJIT` to `ENABLE_LUAJIT`.
* Rename `minetest_*` variables in `version.{h,cpp}` to `g_*`.
* Clean up style of CMake files.
Client doesn't like to receive multiples SendInventory for one action, this can trigger glitches on clients (sometimes due to incorrect UDP packet ordering due to UDP protocol)
This fix issue #2544
* TOSERVER_INIT and TOCLIENT_INIT renamed to _LEGACY
* TOSERVER_PASSWORD merged from dev-0.5, can use protocol v24 and v25
* TOCLIENT_ACCESS_DENIED merged from dev-0.5, can use protocol v24 and v25, with normalized strings an a custom id for custom errors
* new TOSERVER_INIT packet only send MT version, supported compressions, protocols and serialization, this permit to rework everything later without break the _INIT packet
* new TOSERVER_AUTH packet which auth the client
* new TOCLIENT_HELLO packet which send server serialization version atm
* new TOCLIENT_AUTH_ACCEPTED which is send when TOCLIENT_AUTH was okay. After this packet, the client load datas from servers, like after TOCLIENT_INIT_LEGACY packet
* Call UpdateCrafting into SendInventory because this functions is only called before SendInventory
* Use Player* instead of peer_id for UpdateCrafting because SendInventory already has the Player* pointer, then don't loop for searching Player* per peer_id
* m_env_mutex don't need to be used with this modification because it's already locked before the calls
NetworkPacket.cpp:
* Remove some deprecated functions, we must use streaming interface
* m_data converted from u8* to std::vector<u8>
* Add an exporter to forge packet to Connection object
* implement operator << std::wstring. n
* implement operator << std::string
* dynamic resize when write packet content.
* fix string writing and performances.
* create ServerCommandFactory, used by client to get useful informations about packet processing (sending).
* Reliability
* Transmit channel
* Implement putRawString for some ugly char (_INIT packet), and use it.
* Many packet read and write migrated
* Implement oldForgePacket to interface writing with current connection
* fix U8/char/bool writing
* fix string writing and performances.
* add some missing functions
* Use v3s16 read instead of reading x,y,z separately
* Add irr::video::SColor support into packets
* Add some missing handlers
* Add a template function to increase offset
* Throw a serialization error on packet reading (must be improved)
PacketFactories:
* Create ServerCommandFactory, used by client to get useful informations about packet processing (sending).
* Create ClientCommandFactory, used by server to get useful informations about packet processing (sending).
Client.cpp:
* implement NetworkPacket ::Send interface.
* Move packet handlers to a dedicated file
* Remove Client::Send(SharedBuffer)
Server.cpp:
* implement NetworkPacket ::Send interface.
* Rewrite all packets using NetworkPacket
* Move packet handlers to a dedicated file
* Remove Server::Send(SharedBuffer)
ClientIface.cpp:
* Remove sendToAll(SharedBuffer<u8>)
Connection.hpp rework:
* Remove duplicate include
* Remove duplicate negation
* Remove a useless variable
* Improve code performance by using a m_peers_list instead of scanning m_peers map
* Remove Connection::Send(SharedBuffer)
* Fix useafterfree into NetworkPacket Sending
* Remove unused Connection::sendToAll
Test.cpp:
* Remove dead code
* Update tests to use NetworkPackets
Misc:
* add new wrappers to Send packets in client, using NetworkPacket
* Add NetworkPacket methods for Connection
* coding style fix
* dead code since changes cleanup
* Use v3s16 read instead of reading x,y,z separately in some packets
* Use different files to handle packets received by client and server
* Cleanup: Remove useless includes
ok @Zeno-
Tested by @Zeno- @VanessaE and @nerzhul on running servers
* Move networkcode to a dedicated directory
* Rename clientserver.h to network/networkprotocol.h (Better name) and sanitize some includes
* Create object NetworkPacket
* It stores command (opcode) and data separated
* It also stores peer_id
* Data reading can be done by using a streaming interface
* Change packet routing analysis
* Remove old conditional analysis
* Now uses function pointed analysis and add connection state ({Client,Server}::handlers)
* Connection state permit to categorize condition to handle before analyze packets
* Create a handler for depreciated messages, instead of duplicating code
ShadowNinja
Kahrl
kwolekr
est31
David Jones
nerzhul
Břetislav Štec
RealBadAngel
Craig Davison
Jay Arndt
Craig Robbins
poet-nohit
Ner'zhul