Cameras can render even when they are not in the scenemanager or onAnimate didn't get called for example because they are their parent are invisible.
So let's be safe and add another call to updateAbsolutePosition(). Some cost, but usually we don't have that many rendering cameras, so shouldn't matter (if it ever matters I suppose we could override OnAnimate and add a flag if it _was_ animated since last render call. Maybe that's even useful in general for SceneNodes?).
Similar CSceneNodeAnimatorCameraFPS was using getAbsolutePosition which was only updated after animators, so it was one frame behind.
And documented ICameraSceneNode functions a bit. Especially updateMatrices is a bit of a confusing name unfortunately.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6406 dfc29bdd-3216-0410-991c-e03cc46cb475
Sorry, didn't think it through. Seemed to work at first, but works only if sort() ended up creating the same sorting as is used then for search.
While often the case, this is obviously not guaranteed. And can't do sort per type easily (this works with flags which remember if sorting had been done).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6399 dfc29bdd-3216-0410-991c-e03cc46cb475
Previously search functions only worked when called with the same type as the array elements had.
Which forced users sometimes to create dummy objects to be able to search for elements by another type.
linear_search and linear_reverse_search now work with any type for which <T>::operator== is implemented.
Similar binary_search now works when <T>::operator< is implemented in both directions (T < E and E < T).
Note: It might be possible to further improve binary_search so only one operator< is needed (I think STL managed that somehow).
So if someone likes a challenge - have a go at it! :-)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6398 dfc29bdd-3216-0410-991c-e03cc46cb475
Avoids lots of const casts and there shouldn't be a good reason to have those non-const.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6396 dfc29bdd-3216-0410-991c-e03cc46cb475
Just safer in case we add more cases. Also shuts up code analyser.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6390 dfc29bdd-3216-0410-991c-e03cc46cb475
It's to allow image loader to check for sane limits for image sizes.
Idea came from this patch from sfan5 for Minetest: dbd39120e7
Thought solution is a bit different.
Image loader checks not yet added (will come soon).
Also note that limit is to s32. While u32 might work mostly it will run into some troubles with color converter for now (which maybe could be changes). Also 2GB ought to be enough for anybody, right?
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6386 dfc29bdd-3216-0410-991c-e03cc46cb475
Only needs one addItem function when using default parameters for icon.
Add default parameters for setIcon, insertIcon so they can be used easier with pure text.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6384 dfc29bdd-3216-0410-991c-e03cc46cb475
Before the value was checked, but not put into the return variables.
Header update to show that information in kb not bytes (on all systems, was just documented wrong)
Some cleanup of code.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6369 dfc29bdd-3216-0410-991c-e03cc46cb475
- allow ICameraSceneNode to accept any values and correct in buildCameraLookAtMatrixLH with normalize_camera_direction.
if disabled defaults to the current v1.9 normalize
b) add initial Rotation to MayaCamera Constructor default 0,0
c) switchToMayaCamera in Examples. Clones FPSCamera default disabled
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6366 dfc29bdd-3216-0410-991c-e03cc46cb475
It's not 100% identical to what we had as I only copied up to MATERIAL_MAX_TEXTURES_USED before, but I think that was rather premature optimiziation.
(the cost for the extra textures is really in other places, don't think the copy here ever matters).
Was a bit based on Mintest patch, but they messed it up: 4931b34625
(because they didn't notice the difference between MATERIAL_MAX_TEXTURES_USED and MATERIAL_MAX_TEXTURES).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6363 dfc29bdd-3216-0410-991c-e03cc46cb475
I had somewhat rashly removed operator = in [r6280]
But since c++11 implicit defined copy assignment operator is deprecated when a user-declared destructor exists.
Still... alternative would be adding copy assignment operator but neither that nor the virtual destructor seem to be needed.
So rather removind destructor which seems to add an unnecessary virtual function table for it (seems to be just used like a POD throughout the code)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6362 dfc29bdd-3216-0410-991c-e03cc46cb475
See no reason for them. And would have to put back operator= and copy constructor otherwise (realized creating those is now deprecated when having a destructor defined).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6361 dfc29bdd-3216-0410-991c-e03cc46cb475
Previously vertex buffer did some invalid casts to references which could cause it to copy whatever was in memory into the vertex-arrays.
Generally it worked up to S3DVertex - but switch from another type to S3DVertex2TCoords or S3DVertexTangents caused it to be filled with whatever was in memory behind it.
Setter functions in IVertexBuffer have now overloads for all known vertex types.
Also adding const version of IVertexBuffer::getData.
And some warnings in comments about using the array functions (if even we mess it up...)
Also de-deprecate IIndexBuffer::pointer() again. I don't like having 2 functions for same stuff, but in the end it doesn't really hurt keeping it around.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6360 dfc29bdd-3216-0410-991c-e03cc46cb475
color intitialization has some cost, but we initialized all other values already (vectors are always set to 0).
Don't think it's a good idea to have one value around which is random.
S3DVertex2TCoords(S3DVertex& o) to S3DVertex2TCoords(const S3DVertex& o) simply because it makes more sense
S3DVertexTangents(const S3DVertex& o) added because I'll need it later (and no idea why only S3DVertex2TCoords got one of those before).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6359 dfc29bdd-3216-0410-991c-e03cc46cb475
CIndexBuffer::setType could end up casting a temporary u16 variable to u32& (reference!).
Probably never noticed as this tended to mostly works (guess next byte on stack often 0?).
To prevent this from happening again I modifed IIndexBuffer::push_back to work with copies instead of references.
While breaking the interface anyway I also deprecated pointer() which is just identical to getData() anyway.
I get the idea of staying similar to core::array interface, but it's just confusing (and not same due to lack of types anyway).
Also added a const version for getData()
On a side-note - same setType bug still in CVertexBuffer, but a bit harder to fix there. So will be an new patch.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6357 dfc29bdd-3216-0410-991c-e03cc46cb475
No point in repeating pure virtual functions
(maybe wasn't meant to be derived from IMeshBuffer at first?)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6356 dfc29bdd-3216-0410-991c-e03cc46cb475
Thanks @sfan5 for patch for Mintest: 4931b34625
Forum: https://irrlicht.sourceforge.io/forum/viewtopic.php?f=2&t=52819
Note - patch is not applied exaclty yet. SMaterial and matrix4 still missing (might be applied later).
Also patch was based on older Irrlicht and we removed a few already earlier this year (around r6280).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6355 dfc29bdd-3216-0410-991c-e03cc46cb475
Yeah, setValue is not enough and if getLast() works then this should work as well (when users are very careful...)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6345 dfc29bdd-3216-0410-991c-e03cc46cb475
Same as in IIndexBuffer. Needed as replacement for non const operator[] which can't be done for this interface (as type is dynamic).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6344 dfc29bdd-3216-0410-991c-e03cc46cb475
Did some tests and the overhead speed cost on loading and rendering where both not really measurable even in a pretty huge scene.
While some Irrlicht parts might still have a problem with 32-bit meshes (octree for example, also some meshmanipulator functions), it's probably still less of a problem than having broken meshes and just a nicer default. Also the troubling parts in Irrlicht can be improved over time.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6343 dfc29bdd-3216-0410-991c-e03cc46cb475
Giving the loader it's own enum allowed me to add more options.
EITH_OPTIMAL which reduces buffers back to 16-bit if they don't need 32-bit.
Using that in obj loader.
Also 32-bit meshes with EMT_PARALLAX_MAP_SOLID material should now work in obj loader (untested as I got no test-case)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6340 dfc29bdd-3216-0410-991c-e03cc46cb475
CMeshManipulator::createMeshCopy creates new meshes which have copies of the actual meshbuffers instead of copying everything into SMeshBuffers (which didn't support 32 bit or any of the other special features).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6335 dfc29bdd-3216-0410-991c-e03cc46cb475
- IMeshLoader::setPreferredIndexType and getPreferredIndexType allow setting hints for the loaders if users prefer 16 or 32 bit meshbuffers. Loaders are free to ignore those hints (all but .obj will do that for now).
- obj meshloader loads now 32-bit buffers when setPreferredIndexType is set to EIT_32BIT.
NOTE: It's 16 bit meshes use now also an IDynamicMeshbuffer instead of an SMeshBuffer.
That will break the code of people who accessed meshbuffer before by casting to SMeshBuffer*
And might even be somewhat slower (lot's of virtual functions...), but shouldn't really matter and can maybe be a bit improved.
Sorry about that, I considered keeping SMeshBuffer for 16-bit (still considering it), but it would add some overhead in code and I don't think it's worth that. If there are any complains I'll maybe consider it again.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6333 dfc29bdd-3216-0410-991c-e03cc46cb475
Allows to find out which class a meshbuffer has.
I used the same kind of style as ISceneNode::getType. So using four CC codes and virtual functions (instead of type variable).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6330 dfc29bdd-3216-0410-991c-e03cc46cb475
1 Meshbuffer with 24 vertices, so each side has it's own vertices.
Normals perpendicular to the cube-sides.
CubeSceneNode accepts now a ECUBE_MESH_TYPE
CubeSceneNode::clone now also clones rotation and scale (not sure why it didn't do that before - hope there was no reason, but can't think of any).
ISceneManager::addCubeSceneNode accepts now a ECUBE_MESH_TYPE and passes it through.
Example 22.MaterialViewer using new cube type. Also a few more beauty fixes there.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6313 dfc29bdd-3216-0410-991c-e03cc46cb475
Other functions like getMaterialRendererName got switched to u32 in the past. I can see no reason why this one was left out, so changing it to be same as the rest.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6300 dfc29bdd-3216-0410-991c-e03cc46cb475
So uv-coordinates can now be modified directly (previously only possible via texture matrix).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6299 dfc29bdd-3216-0410-991c-e03cc46cb475
That was a bad case of premature optimization.
Multiplication is indeed faster, but when working with floats this can introduce some rather unexpected inaccuracies.
Like x/x suddenly no longer being 1.0 (something guaranteed by division).
If someone really needs this back, then please add some new function which makes it clear we don't just have a typical division here.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6298 dfc29bdd-3216-0410-991c-e03cc46cb475
Just safer. Could probably do in a lot more places... another time.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6293 dfc29bdd-3216-0410-991c-e03cc46cb475
They all just implemented the same the default functions do.
This causes now warnings with newer gcc -Wdeprecated settings (otherwise they would have had to implement always both, but makes no sense as they did nothing special).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6280 dfc29bdd-3216-0410-991c-e03cc46cb475
It's identical to the implicit one generated, so we don't need that.
And it triggers warnings with -Wdeprecated in newer gcc.
It's because the implicit definition of a copy constructor is deprecated if the class has a user-declared copy assignment operator.
There's a few more warnings about that in Irrlicht, will have to check them in detail as the other cases are not as trivial to fix as this one.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6279 dfc29bdd-3216-0410-991c-e03cc46cb475
Lets just keep this one around. Easy to use, downward compatible and generally works as expected.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6259 dfc29bdd-3216-0410-991c-e03cc46cb475
Usually something like __IRR_SOME_GUARD_INCLUDED__ replaced by IRR_SOME_GUARD_INCLUDED.
Removing underscores at the end wasn't necessary, but more symmetric (probably the reason they got added there as well).
While this touches every header it shouldn't affect users (I hope).
Also a few whitespace changes to unify whitespace usage a bit.
And a bunch of spelling fixes in comments.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6252 dfc29bdd-3216-0410-991c-e03cc46cb475
