Utilizes several new features allowing the description of an item to be changed using the `description` meta key. This also moves keys from using the old single-value itemstack metadata system to the new node-like metadata system.
This implements a node-timer based leafdecay mechanism, and exposes
an API to use it in mods.
The API is documented in game_api.txt.
`default.register_leafdecay(leafdecaydef)`
`leafdecaydef` is a table, with following members:
{
trunks = { "default:tree"}, -- nodes considered trunks
leaves = { "default:leaves", "default:apple"}, -- nodes considered leaves
radius = 3, -- activates leafdecay this far from the trunk
}
The algorithm will drop `leaves` items in the area if no `trunks` are found
in the `trunk_radius` sized area around the position of the leaf. If a node
listed in `leaves` has a group `leafdecay_drop > 0`, then the item is dropped,
otherwise the item is removed but not dropped.
The algorithm also implements a value `default.leafdecay_speed` (default
15) which can be modified to increase or decrease of the leaf decay. The
algorithm will vary the actual speed a bit to introduce randomness.
Leaf decay is randomized by 0.1 seconds to reduce the chance that
decay happens many times on the same second interval. This requires
nodetimer_interval to be set to values lower than 1.0 to have an
effect.
The leaves will decay between 2 and 10 seconds after digging the trunk,
and happen at non-integer second intervals.
-- The API was added by sofar.
Plantlike drawtype no longer applies 'visual scale' twice, so now we
use the actual scale factor desired.
Remove unnecessary 'visual_scale = 1.0' lines.
Light level 14 to be able to grow plants.
3 returned from crafting with 1 glass node, 3 mese crystals and 1
wood plank.
Seamlessly placable on appletree wood fence posts.
This code adds the key concept to minetest_game, and integrates it
with lockable nodes. Currently supported lockable items are the Steel
Door, the Steel Trapdoor, and the Locked Chest.
The goal of this modification is to introduce a fine-grained multi-
player permission system that is intuitive and usable without any
console or chat commands, and doesn't require extra privileges to
be granted or setup. Keys can also physically be conveyed to other
players, adding to gameplay and adding some personality that is
preferable to console commands or editing formspecs.
A skeleton key can be crafted with 1 gold ingot. Skeleton keys can
then be matched to a lockable node by right-clicking the skeleton
key on a lockable node, which changes the skeleton key to a "key".
Gold was chosen as it's currently a not-so very useful item, and
therefore it's likely that players have some, but aren't really
using it for any purpose.
This key can subsequently used by any player to open or access that
lockable node, including retrieving items from Locked Chests, or
putting items in them.
They key is programmed to fit only the particular locked node it is
programmed to. This is achieved by storing a secret value in both
key and locked node. If this secret value doesn't match, the key
will not open the locked node. This allows many keys to be created
for one chest or door, but a key will only fit one node ever. The
secrets are stored in node, and item meta for the key.
If a locked node is removed, all keys that opened it are no longer
valid. Even if a new door/chest is placed in exactly the same spot,
the old keys will no longer fit that node.
Keys can be smelted back in gold ingots if they are no longer useful.
The method of storing a secret in nodemeta and itemstackmeta is secure
as there is no way for the client to create new items on the server
with a particular secret metadata value. Even if you could possible
create such an itemstack on the client, the server does not ever read
itemstackmeta from a client package.
The patch adds an API that allows other nodes and nodes added by
mods to use the same keys as well. The method how to implement this
is described in game_api.txt. The mod should add 2 callbacks to it's
node definition. Example code is given.
Textures are from PixelBOX, thanks to Gambit.
This merges the current state of the well-maintained and tested
`torches` mod as I've maintained it for the last 6 months.
This started out as a thorough cleanup of 3D torches by blockmen,
where some of the initial code still remains.
The models were redone entirely from scratch and have been extensively
tested with dozens of animated textures converted with mcimport,
and look a lot better than the original 3D Torches mod.
The ceiling torch is retained and functional. The `wieldlight`
addition that the torches mod has was removed, since it relies
on wieldview to look decent. This can stay external mod code.
I've opted to move the torch nodes to a separate file. It's not
a lot of code but nodes.lua is already huge, and I wanted to
retain the copyright header and some of the readme.txt notes,
and this was the easiest way of doing it.
This code passes "default:torch" to nodes with on_rightclick,
fixing problems with itemframes. Essentially it has a more
elaborate item_place() routine to make sure we're not passing
the wall torch to nodes that may display it.
The ceiling torch is a separate model and not the same as the
floor model. That does mean that there are 3 models in this
mod.
This is all the working code from SmallJoker's boost_cart, poored into
a more suitable form for minetest_game.
- Mesecons and moreores stuff was removed entirely.
- Textures were all renamed and moved out of default/
- Updated license, readme.txt, attribution
- Changed code license to MIT, left artwork at CC0
- removed default:rail and made aliases for it
- :carts:rail is now carts:rail.
- localized entity def
- removed copper rail entirely
- startstop rail was removed, as well as detector rail
- remodeled to b3d using stujones11 excellent blend model, but sizes
of cart adjusted to make pixel sizes consistent (0.625) everywhere.
- slightly more complex texture map for the cart (front/side visibly
different)
- rail parameters are passed as a separate def table, and stored in
a private list. This avoids having to call `get_meta` on every
node. In return, we need the node name, though.
- adds metal sounds (based on default metal sound function) and
cart moving sound.
- reduced cart speeds to max 7, 5 by pushing.
- Added on_step() rail event handler, gets called when a cart is on
a rail.
- Added various rebased updates from upstream (thanks Krock)
- Included a fix that removes the 'reverse jiggle' when stopping.
- Included reworked textures by sofar.
The mod namespace is still public, but I'm NOT declaring it an API. I'd
rather see it localized instead, for now. Any public interface in this
code is *experimental* at best, and should be considered non-stable and
unsupported for now.
Make lava cooling ABM use a new group 'group:cools_lava'.
Nodes other than water can cool lava. We assume snowblock and ice melt,
turn to water and cool lava.
Leave 'group:water' present temporarily to not break mod liquids.
A deeper, darker level of leaves is created by tiling the texture
2 by 2, reducing brightness and offsetting this.
For a denser leaf appearence with the 'simple leaves' setting.
Also used for acacia bush leaves.
To allow mapgen bushes in green-grass and savanna grasslands.
Nodes for a generic bush and an acacia bush.
Stem nodes are craftable to a single wood node to provide a small
amount of wood resource in grasslands.
Fuel times are that of corresponding 'wood' nodes, 1/4 that of
corresponding tree nodes.
No leafdecay to enable use as hedges or without a nearby tree trunk.
Uses 'default leaves simple' texture for extra visual thickness.
Credit to tenplus1 for the suggestion to generalise for mod use.
Mods can add mod nodes to 'group:spreading_dirt_type' enabling the
function to work with mod nodes.
Add some nodes to this group.
Removing 'dirt_with_grass' etc. from 'neighbors' stops the ABM action
running everywhere and constantly, on the dirt nodes immediately below
the surface nodes. Now the action only runs in the rare case of a dirt
node with neighbouring air, grass decorations or snow.
Remove check for air above to allow grass to spread under light-
transmitting nodes such as fences, walls, plants. This causes spread
under slabs, stairs and glass, when near air, but seems worth it.
Remove unnecessary check for nil node.
Make the softer woods, pine and aspen, 'flammable = 3'.
Correct inconsistent flammability of wood and stairs in relation
to all other solid wood nodes in MTGame.
Make the the softer woods, pine and aspen, 'choppy = 3'.
Allows walking in, and prevents being trapped in, 2 node high spaces.
Simulates player's feet sinking into snow.
Easier jumping up onto nodes with snow.
Add a global 'intersects protection' function to functions.lua for
checking if a specified volume intersects with a protected volume.
A 3D lattice of points are checked with an adjustable interval.
Add a global 'sapling on place' function to avoid duplicated code in
nodes.lua.
Nyancats are independent in the default mod. Nothing else uses them or
their code. Separating it into a separate mod makes it easier for
subgames to remove them. It also makes it easier for a mod to depend
on nyancats, as lots of subgames don't have them.
Default/mapgen.lua: Register biomes, ores and decorations in
singlenode mapgen. These were never disabled anyway because
singlenode was removed from the world creation menu.
Allow many crafted nodes to be rotated in any way possible.
These blocks all have slab and stair versions, which can create awkward
patterns if placed together. By allowing these to be rotated players
can create new patterns and appearances that were not before possible.
Since this wasn't possible before, there won't be any effect
to existing builds, as param2 should always be '0'. The current
screwdriver mod also refuses to rotate and alter param2, so this is
safe to enable from now on.
Personally, since these are all *crafted* nodes to begin with, it
should be apparent that they can be rotated to begin with, but I can
see people may disagree from a simplicity perspective. It also may
affect param2 usage that other mods rely on, although I'm not aware
of any mods that do this.
Each sapling is given a single node timer that is between
2 and 4 days of game play time (40-80 minutes). If you walk out
of the zone, and come back later, the tree will always grow
to full if the timer has elapsed.
Because trees.lua is all functions, it needs to be parsed before
nodes.lua, since that references some of its functions. Hence,
change the order of parsing here. Otherwise saplings would not
grow to full.
Adds a minor helper function that allows efficient retrieval of
several inventories from a node inventory. We use this helper to
quickly retrieve the items in chests, vessel shelves, book shelves
and furnaces, and return these with the nodes itself to the TNT caller.
The TNT caller then performs the entity physics, and we don't need
to do anything else.
We disable TNT doing anything with bones.
We expose a bug in the code that drops the items - metadata was lost
entirely. This patch corrects that by properly copying the metadata
and creating the drops list inclusive metadata.
The access privilege allows players that have it to bypass protection
on locked doors/trapdoors, chests and bones.
The priv also allows bypassing any minetest.is_protected() check,
including digging nodes and placing them. It is meant for world
moderators to clean up and fix map issues.
Original patch by red-001. Split up and rebased/rewritten by sofar.
This patch requires https://github.com/minetest/minetest/pull/3800
This changes the drawtype of fences to NDT_CONNECTED nodebox drawtype.
These nodes are drawn by the client with the needed connections on
the fly as the scene is drawn. There is no logic needed by mods to
modify the nodes.
These fences connect to (1) other fences, (2) planks and (3) tree
trunks, but nothing else. They do not connect to stone, dirt, wool,
etc. This is done by the "connects_to" parameter, which takes groups
and node names.
Due to the way textures are wrapped, we can make these nodes look a
lot better by giving them a special tile.
This change requires minetest/minetest#3503.
These sounds were perceived to be too loud in the
game. I've lowered them significantly but they remain
plenty audible. The dig sounds were very loud as well
so I toned them down as well.
This converts the call to minetest.register() for the default
fence node, so it can be called by other mods to quickly
setup other fences.
Since this creates an API, insert it into the game_api.txt.
The api looks like minetest.register(name, {def}), and has two
uncommon fields: "texture" and "material". Any normal nodedef
property can be passed through, except "drawtype". The "fence"
group will always be added.
The default fence recipe is modified to be as follows:
wood, stick, wood
wood, stick, wood
This recipe yields 4 fence nodes.
This allows us to create according recipes for acacia, pine,
aspen, and junglewood fences without adding new stick types:
pine wood, stick, pine wood
pine wood, stick, pine wood
This is a from-scratch implementation, written by heart but inspired
by (#665 - Add many wooden fences).
Stick and fences nodes are named in a consistent way.
Adds a birch-like tree to the default_game. Aspen was chosen on
purpose instead of birch, as several birch tree mods already exist
and choosing a different name avoids any conflicts.
Schematics were made for both normal and sapling version, assuring
saplings will not be able to grief. The shape of the Aspen is "fanning
out at the top" and provides an easy tree to walk under, but still a
somewhat thick cover. The Aspen trunk is 4 to 6 blocks tall, with up
to three layers of leaves on top, making it slightly taller than an
Apple tree, but shorter than a Pine tree, which provides a good blend.
Textures were painted from scratch, except tree_top and _wood
variants, which are color modified versions of the pine_wood
variants. Appropriate licenses have been chosen for the new textures.
The leaf texture is light enough to contrast other trees, but dark
enough to offset against our light default grass color. The leaves
are drawn in the typical minetest default fashion with plenty of
transparancy, but enough definition to suggest that you're seeing
something that looks like leaves. The placement of leaves in the
schematic also suggests the top of the tree is sparse and you can
see the sky through the leaves.
Sapling texture is both traditional and different, with lush green
leaves and a well-defined stem, but slightly stick-like and skinny,
as these plants tend to grow up first, then out.
Add fallen Aspen logs. We make these logs a minimum of 2 blocks long,
and up to 3. This allows us to make these logs a place where both
red and brown mushrooms can be found, to these may be attractive to
players. However, the spawn rate for these has been reduced a lot
compared to the other logs, to account for the scarcity of Aspen.
Add stairs, slabs for these wood types as well.
Mapgen will place these trees in deciduous forests only, but in
a way that the biome is a range between entirely Apple trees, and
mostly entirely Aspen trees, with a bias to Apple trees. To make
fallen logs somewhat correlated with trees, we modify the planting
of Apple trees and logs to use perlin noise and not fill ratio,
otherwise you'd always end up with Apple logs in Aspen tree areas,
which would be suspicious. There still is a bit of a mix.
* Move furnace related code into furnace.lua
* Move duplicated code into functions
* Rewrite ABM:
* Easier to follow strcuture (no returns in the middle)
* No unnecessary calls to get_craft_result
* Split logic and "visual feedback" (a bit)
* Fewer calls to meta:set and meta:get
* Better feedback on the current state of the furnace
Also, move "waving = 1" property for grasses/shrubs over to default/nodes.lua
and put all instances of this property right under the drawtype, since they
are directly related and depend on the above.
