Thanks @randomMesh for reporting that they were missing: https://irrlicht.sourceforge.io/forum/viewtopic.php?p=307308
Also simplified that code a bit (same could probably also be done for createCylinderMesh, but too lazy right now)
Changed also UV's for top/bottom center vertex in CGeometryCreator::createCylinderMesh to use center for X (slight improvement, but would have to copy vertices to make it better)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6580 dfc29bdd-3216-0410-991c-e03cc46cb475
While there are some cases this fixes, like MartinVee's nice example for orthographic camera at https://irrlicht.sourceforge.io/forum/viewtopic.php?t=51598
it seemed to cause more problems in complex 3d scenes with perspective cameras.
Well anyway - both options are available now for those which need it.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6574 dfc29bdd-3216-0410-991c-e03cc46cb475
Adding 2 algorithms to sort by distance to camera plane instead of camera position.
This is better in quite a few situations and extra cost is just one vector subtraction per node and an additional function parameter per call, I think that's worth it. So made the camera-plane to object-center now the new default.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6573 dfc29bdd-3216-0410-991c-e03cc46cb475
Until last summer we sorted by object origin to camera distance
Since then we used nearest transformed bbox-extent to camera.
I've now added an enum to allow switching those plus 2 new:
- none (so sorting based on scenegraph instead)
- object center to camera. Which I made the new default as it worked the best in my tests.
I already experimented with a few more ones like different sphere sizes (bbox radius, minimal inbound radius, maximal inbound radius) around center or origin to handle objects with different sizes, but that just gave worse results for all my test cases.
Likely algorithms we should still try:
- Collision point with bounding-box in line between camera and object center (sounds a bit slow, but maybe worth it)
- Distance to camera plane (instead of camera position). But needs additional parameter to distance functions first (maybe normalized view vector will do). That should be useful when working with planar objects.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6572 dfc29bdd-3216-0410-991c-e03cc46cb475
A bit annoying that it kinda has the opposite meaning for png and jpg compression for same parameter (png compression goes up, jpg goes down).
Also unfortunate we chose u32 instead of int here or we could at least use the usual zlib value range for png.
But I think it still won't mess up in many cases. Defaults (value 0) stay the same as before.
And setting a jpg range <= 10 is rarely done and even if so it just changes png sizes a bit now if people use writer for both.
People just have to be careful now when they override defaults for png and then also write jpg - but can't help it.
And it's too useful to not have this - this can massively change the write-speed for png's (like up to 3 times faster with no compression on my system).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6570 dfc29bdd-3216-0410-991c-e03cc46cb475
Different UserData values are no longer by default causing materials to be different.
It now always checks in this case the IUserData != operator.
This allows more user control. Can still have them be different by checking pointers in overloaded compare function.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6569 dfc29bdd-3216-0410-991c-e03cc46cb475
This can't work as on deserialize it would need to have the type for IUserData already.
And that's impossible with the way it's used right now.
Would need some kind of factory or so probably, but I'll ignore this for now.
Note that it's still possible to call some serialization manually on the derived classes by adding it there if needed.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6568 dfc29bdd-3216-0410-991c-e03cc46cb475
Irrlicht generally avoided user pointers in the past, but after trying all kind of ugly workarounds - this is just easier and
not that much downsides really. Tiny speed costs due to additional SMaterial memory size and new comparison tests.
But allows to keep SMaterial alive and useful for a while longer without needing a complete rewrite and it can now be used for stuff like writing PBR shaders.
Using a new interface io::IUserData for this which also allows serialization the user data (that part is untested so far, sorry)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6567 dfc29bdd-3216-0410-991c-e03cc46cb475
As Blender docs describe it so nicely: Using lens shift is equivalent to rendering an image with a larger FOV and cropping it off-center.
This can be quite useful for architecture renderings, but I guess also has it's use in other situations.
Note: Didn't make the ICameraSceneNode functions pure virtual so users don't have to update their cameras for this
Also some change in serialization - same as in other places by now, do use existing values as defaults values when they are not found instead of resetting them to 0.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6565 dfc29bdd-3216-0410-991c-e03cc46cb475
Returns now getMipMapsData instead which for now will always be 0 in this case (but might work one day)
Also removing comment about ITexture::lock() mipmapLevel parameter being broken. It got fixed in November 2019.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6563 dfc29bdd-3216-0410-991c-e03cc46cb475
Software driver sometimes works with original image (in 2D) and sometimes with POT version of the image (in 3D).
That is probably useful so it can draw the UI in best quality while having relative fast 3D.
The problem is that lock() only returns one data - so it decided to return the original data and then in unlock it updates the other data. But lock() data usually depends on getSize() so using EDT_SOFTWARE like other drivers causes crashes.
Not sure what the best solution here would be (maybe more flags or more lock functions?), so I just document the deviating behaviour and leave it as is.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6559 dfc29bdd-3216-0410-991c-e03cc46cb475
Rest of Irrlicht is using left-handed rotatations.
But 2d vector rotations all uses ccw which is kinda the same direction as this one if you consider those as rotations around Y, so I guess that was maybe the reason back then.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6536 dfc29bdd-3216-0410-991c-e03cc46cb475
Parameter already called fovy, but shouldn't hurt to mention it twice
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6531 dfc29bdd-3216-0410-991c-e03cc46cb475
We had 4 near identical functions, those now all call buildProjectionMatrixPerspectiveFov
They were a bit hard to check for errors otherwise.
Especially with the tiny confusing non-differences like one using (a-b) and other -(b-a)
Also new one uses matrix template parameter in case someone needs for example a high-precision matrix.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6530 dfc29bdd-3216-0410-991c-e03cc46cb475
Removing includes which were not needed by headers
Note that if you include those headers directly (instead of including irrlicht.h) you may have to add some new includes now.
Thought I generally tried to avoid removing headers where it leads to too much changes in user-code
Reason was mainly that IntelliSense in VisualStudio 17.7 added a new feature which shows those unused headers :)
Has to be used a bit careful as it doesn't know about defines and other platforms
And I only did clean up public headers so far (will probably do some more later or another time)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6524 dfc29bdd-3216-0410-991c-e03cc46cb475
Turns out we can avoid a square root and a division.
Patch comes even with proof: https://raw.org/proof/quaternion-from-two-vectors
(I also tested it a while and indeed got same results)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6511 dfc29bdd-3216-0410-991c-e03cc46cb475
What Irrlicht calls ShaderConstants is called uniforms by everyone else. So let's mention this at least.
Also reworked setVertexShaderConstant interface had an example for the old interface in the header.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6497 dfc29bdd-3216-0410-991c-e03cc46cb475
Fix: When appending to an empty mesh boundingbox has to be initialized with first position
Adding updateBoundingBox parameter as there is a bit costs involved in updating that and it might not be necessary at that point
Default is still to do it - and with the default parameter it's at least compile compatible to old interface (unless users created their own meshbuffers).
Optimizing the copying of vertices in CDynamicMeshBuffer::append by using memset when possible instead of pushing each vertex (which goes through quite a few virtual functions)
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6496 dfc29bdd-3216-0410-991c-e03cc46cb475
Couldn't allocate enough memory before appending several buffers for all of them as first append shrunk the memory again.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6495 dfc29bdd-3216-0410-991c-e03cc46cb475
Doesn't change it's own type - so can still drop data. Or overflow 16-bit buffers (which creates broken models, but no crashes).
But it no longer has a problem adding 16-bit index-buffers to a 32-bit index-buffer for example.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6494 dfc29bdd-3216-0410-991c-e03cc46cb475
Some in CMeshBuffer got disabled in svn r1515 (before Irrlicht 1.7) without comment.
I suspect reason might have been that they are a bit unsafe and it was meant to be reworked.
Maybe was planned to put that into MeshManipulator?
And CDynamicMeshBuffer never had them.
Anyway, it's useful stuff and having functions do nothing doesn't help. So now they do at least basic work.
Meaning - as long as index and vertex types are identical it's possible to attach meshbuffers again.
While totally ignoring things like 16-bit index overflow for now (so could be improved).
It would probably be better if attach functions had info about vertex/index types, but just keeping interface as it is/was for now.
This also fixes Bug #310 reported by Gaz.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6493 dfc29bdd-3216-0410-991c-e03cc46cb475
SMaterialLayers are now identical when both have identity matrices.
Before it didn't consider them identical when one layer had set the identity matrix explicitly and the other didn't.
Generally didn't matter, just caused very rarely some extra state switches in the drivers. And just as rarely had a cheaper comparison. Just seems more correct this way.
operator= no longer releases texture memory which was allocated at one point.
Unless explicitly requested such memory is now always released later in the destructor.
This can avoid quite a few memory allocations/released in the driver. Usually not a noticeable performance difference on most platforms. But it can help avoid memory fragmentation.
We instead use an extra bool now to tell if the texture memory is used. So slight increase in SMaterialLayer and SMaterial size. But I did a quick performance test and this had no negative influence here, while it did improve speed in the case where it switched between material layers using/not using texture matrices a bit.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6488 dfc29bdd-3216-0410-991c-e03cc46cb475
Wasn't ever used by anything and not that well defined anyway.
So they all just passed it on to the drivers. And then sometimes the driver version was called and sometimes the IMaterialRendererServices version. So now everything just calls the driver - all places which need it have access to the driver anyway. Also made the driver version non-virtual for now. If someone actually really needs this for some reason I can add it back as virtual function directly in IVideoDriver. But I doubt it - the interface was hardly accessible until recently and originally only meant for internal stuff.
GLES version still to do, but checked them earlier and they also just do nothing with it.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6486 dfc29bdd-3216-0410-991c-e03cc46cb475
So far SceneManager always sorted Nodes per render stage.
Now we allow sorting per mesh-buffer per render stage by creating a new node for each mesh-buffer.
It's only supported for CMeshSceneNode so far.
This allows to enable better transparency sorting for meshes which have transparent buffers.
Previously those always got rendered in the order in which they got added and ignored mesh-buffer bounding-boxes, but just used the bbox of the full mesh. Now they can use the bbox for each meshbuffer which can sometimes avoid render errors.
Also depending on the scene this can be quite a bit faster because it can help reduce texture changes. We sort solid nodes per texture, but only per node. So nodes with several textures had a texture switch between rendering each meshbuffer. And those are rather expensive in Irrlicht right now (and we support no bindless textures yet...)
Lastly it's now also used to buffer the render-stage. Checking this twice (once in registering the node and once in render) constantly showed up in the profiler. Which was a bit surprising really, but anyway - now it's gone.
I tried to keep it working for all cases we had before (all kind of situations, like when people may want to call render() outside the SceneManager). But not (yet) supporting the case of changing the meshbuffers (adding or removing some) without calling setMesh() again. Reason is that this wasn't well supported before either (node materials never updated). So for now I just assume people will call setMesh() again when they change the mesh.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6483 dfc29bdd-3216-0410-991c-e03cc46cb475
New AbsPosUpdateBehavior which makes updateAbsolutePosition calls behave as if a node had no parent.
Allows for micro optimizations in cases where we have non-moving root node (all scenenodes are always added to the SceneManager which is generally not moved but it's transformation is still multiplied each frame for each node)
As a side-effect this also allows abusing the SceneManager to group objects without affecting transformations.
No real extra cost since I added ESNUA_TRANSFORM_POSITION already.
Thought turns out those matrix transformations are so fast that I also didn't noticed any difference in tests with > 20.000 nodes.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6481 dfc29bdd-3216-0410-991c-e03cc46cb475
This makes it possible to set high-level shader constants (which are attached to shader programs) to be set outside
of OnSetConstants.
IShaderConstantSetCallBack::OnCreate has it set automatically now so it works the same as OnSetConstants.
D3D9 and burnings both work different, so there hadn't been a problem with those.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6469 dfc29bdd-3216-0410-991c-e03cc46cb475
Accessing IMaterialRendererServices outside of OnSetConstants can be useful and Irrlicht made this a bit too hard to access.
Also OnCreate allows actually for nicer code where initialization and update of shader constants are strictly separated (see changed example).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6465 dfc29bdd-3216-0410-991c-e03cc46cb475
We had changed that once before in the other direction in svn r421
Reason back then was "Sleep(0) doesn't allow any lower priority threads to execute"
But Microsoft changed the behaviour of Sleep(0) after Windows XP so that's no longer true.
And the costs of it is pretty high - due to this using a timer with a 15ms resolutions it meant not just giving up the thread but it also always waited for 15ms on Windows.
I also replaced a few sleep calls in examples for that reason with yield() calls.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6459 dfc29bdd-3216-0410-991c-e03cc46cb475
Pretty new internal (protected) variable, so renaming shouldn't break yet too much.
Reason is that VS code completion often showed that variable as first option before the way more used updateAbsolutePosition function. Which was a bit annoying.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6449 dfc29bdd-3216-0410-991c-e03cc46cb475
Bitfields for PolygonOffsetDirection, ZWriteEnable and BlendOperation were chosen too small.
As we have pre c++11 code and therefore didn't use unsigned qualifiers for enums they were generally signed (up to compiler in theory, but I think they all choose signed).
Which means the bitfield also had a sign.
So for example setting PolygonOffsetDirection to EPO_FRONT set it to -1 instead of 1.
Which then would fail with comparison checks (PolygonOffsetDirection == EPO_FRONT would be false).
We kind of got lucky that we usually not checked for the last enum inside Irrlicht, so it worked to due being the "else" case.
Or in the ZWriteEnable case the last one was identical to the default return value so it also worked accidentally.
But obviously still wrong and user code could be messed up.
While at it I also re-ordered SMaterial variable so most bitfield variables are close together again to give compiler at least a chance to use packing. Thought at least in my quick debug compile test it didn't seem to use any packing (but maybe on other compilers).
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6440 dfc29bdd-3216-0410-991c-e03cc46cb475
- Only the getRotationDegrees without parameter is allowed to try fixing scale.
My fault when I added a new function which takes scale parameter, that one is
not allowed to be changed.
On the up-side - we know have for the first time an option which works in cases only
scale and rotation had been used and the user still has the correct scale.
Before any solution for that was broken
- getRotationDegrees fixes 2 places which caused wrong results due to floating point inaccuracies
New test for that got added
- Document the current restrains and problems of getRotationDegrees and getScale some more.
- Improve docs for other matrix4 functions.
- Add some comments about further improvements (I'll try if I find time)
Note: Irrlicht still assumes in at least 2 places (getting bone animations and Collada loader) that matrix
decomposing works. Which it doesn't yet for matrices which switch handedness (or have further transformations like skewing axes)
The bone animation is mostly fine for now with recent workaround (but that might cause other problems as it may be used too often), haven't checked Collada yet in detail.
TL/DR: This improves things with getRotationDegrees, but does not yet fix all troubles.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6439 dfc29bdd-3216-0410-991c-e03cc46cb475
ISceneNode::setUpdateAbsolutePosBehavior can now control what ISceneNode::updateAbsolutePosition really does.
Having only the position and not the rotation/scale of a child node affected by the parent transformation was previously impossible inside the scene-graph. So people always had to break the scene-graph and code it themselves.
Old behaviour is default.
Extra check for new variable has a small cost, thought new behaviour can actually be faster when it's used.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6432 dfc29bdd-3216-0410-991c-e03cc46cb475
Also documenting some missing feature (decimal places ignored with direct text input)
getValueFor allows to check the value a given text would have
getOldValue can be used to check the previous value in a EGET_SPINBOX_CHANGED event
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6429 dfc29bdd-3216-0410-991c-e03cc46cb475
First problem was that IGUIElement::getNextElement wasn't passing includeInvisible and includeDisabled flags recursively, so anything deeper than one level could fail if an element was disabled/invisible in between while it was created.
Second problem was that setTabOrder(-1) did ignore disabled elements. So when any parent was disabled when elements were created they never got a tab order.
git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@6428 dfc29bdd-3216-0410-991c-e03cc46cb475
cutealien